Keep losing Connection between iTunes and Express

I have Express, used exclusively to play music through powered speakers. However, my eMac and MacBook Pro iTunes keep losing connection to the Express. I have repeatedly reset the Express, get the connection back temporarily, then lose it again. I use a Netgear NEXT Wireless-N router and I do not see a setting that might solve this problem.
Anyone have an answer? Should I set the router to have Express use a particular Port?

Okay guys, I've got it with the help of Michael at Apple tech support (great customer service experience today--thanks Apple): It took some time to diagnosis the problem, but the solution we found was that it was actually two problems relating to interference:
1. Change the channel: The network (changed it in Time Capsule as the AE is connected to that network) channel was set to 6, which is a common one that many routers default to. We set it to 9 and that improved it a lot, but not all the way, and he suggested trying some other channels to find the channel with the least interference in the area.
2. Cordless 2.4 GHz cordless phone: We unplugged it and it's seemed to solve the interference problem almost perfectly (it's just cutting out for a second here and there every few minutes--compared to before for several minutes and only playing for a few seconds). He suggested getting a 6.0 GHz phone to bypass the interference, which is likely what I'll do. I'll also try relocating the phones base station and see if that makes any difference. Either way, after several hours of trying to figure it out it's nice to be listening to my music!
If I find out anything else I'll post it here.

Similar Messages

  • After updating to ios 8.2 i cant even used my phone at all it keeps saying connect to itunes and now its saying restoring its been over 2 hrs

    Attempted to download new ios 8.2 software, I can't use my phone now as it is saying connect to iTunes?!  So I connected to iTunes and it isn't doing ANYTHING.
    THIS IS CRAZY!!! Apple - GET YOUR CRAP TOGETHER!! Don't release an update if it isn't ready!!!!

    I just had my phone 5c screen replaced and it was working fine until I tried updating it 30 mins later, I was getting error messages and couldn't move past the Apple logo. so when I tried a factory restore I get a message saying It cannot restore or update my phone. Now my phone is stuck on restore mode screen and cannot load anything. I've tried restore on multiple computers and updating to latest itunes versions. Anyone know whats going on?

  • Losing connection between my aiport express and William Sanoma Smart Thermometer  HELP !!

    I got a WS Smart thermoneter for xmas and once setup it will work with my iphone or ipad one time then it loses the connection to my airport express. Please help

    Sounds like an interferance problem to me. Do you have a cordless phone? You can try changing the channel on the AEBS or enable internet robustness.

  • Keep-alive connection between app and servlet

    Hi,
    I have searched the forum for information about how to keep a
    connection alive between a client app and a servlet, but I have not been
    able to find anything.
    Does someone have an example of how to do this? Please send it!
    Thanks!

    HTTP connections are transient, they're not meant to be kept open.
    HTTP 1.1 can support this feature, check the RFC and servlet specification (and probably the appserver documentation for configuration).
    Best use another protocol though, ftp for example (or something else entirely).

  • Why does my iPad2 suddenly keep losing connection on facetime?

    Why does my iPad2 suddenly keep losing connection on FaceTime and tries to constantly reconnect?

    Does it happen anywhere that you use FaceTime or only in your home WiFi network? If it happens with your home network, have you tried power cycling your router? Unplug it for about 30 seconds and then plug it back in.
    Turn WiFi off and on in the settings. Reset the network settings.
    Have you tried any troubleshooting steps at all?

  • My ipod touch 4th gen keep showing connect to iTunes ?

    My ipod touch 4th gen keep showing connect to iTunes, and when i do it says its on a recovery mode and must restored. But i dont wanna restore it because I have pictures that i havent saved yet ? what i can i do ? i really need those pictures

    Try:
    Make a backup of your content on iTunes (computer), then factory restore your iPod touch.

  • I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

    I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

    I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
    CB

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

  • HT1212 I just bought a new ipod touch from a friend but she didn't reset it and everytime that I try to rest it, it keeps saying "Ipod is disable, connect to Itunes" but I'am connected to Itunes and it also says put in correct passcode?? how do I reset it

    I just bought a new Ipod ios from a friend and she didn't reset it before she gave it to me and when I try to connect it to my laptop it keeps saying "Ipod is disable, connect to itunes"and it says to put in the correct passcode but I don't know what the passcode is and now I can't get ahold of my friend that sold it to me. So my question is: How do I reset the passcode and the Ipod touch so that I can sync it to my laptop and so that I can enjoy my new Ipod Touch?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

    my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

    Place the device in DFU mode and restore.

  • My ipod keeps on saying ipod is disabled connect to itunes and when i connect it to itunes it says i have to inter a passcode on the ipod to connect to itunes

    my ipod keeps on saying ipod is dissabled connect to itunes and whin i connect it to itunes it says i have to inter a passcode on the ipod to connect to itunes what do i do??

    hi, may i know how to restore and put it on recovery mode??
    as I faced the same problem as you now...
    Thanks

  • Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen.  Full Wifi signal on both devices

    Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen.  Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

    Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
    I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
    I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
    Here is a link to the other thread I was referring to above:
    https://discussions.apple.com/message/19952545#19952545
    Have you applied the latest firmware updates to your ATV 3's?

  • HT1339 My ipod is stuck at step 9 in this guide. Itunes told me to keep my ipod connected to itunes, and my Ipod shows the Apple logo as it should (though I can´t see any progress bar). Do anybody know how  long step 9 takes. I have turned off my firewall

    My ipod is stuck at step 9 in this guide. Itunes told me to keep my ipod connected to itunes, and my Ipod shows the Apple logo as it should (though I can´t see any progress bar). Do anybody know how  long step 9 takes. I have turned off my firewall.
    Please Help!

    If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
    If the issue is incurable next time, you have a one-year warranty from the date of purchase.

  • My ipod keeps asking me to restore and when i do restore it just restarts and asks me to connect to itunes and starts again.please help its my sons bday and this is his present

    my ipod keeps asking me to restore and when i do restore it just restarts and asks me to connect to itunes and starts again.please help its my sons bday and this is his present

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • How to check the status of a job!!!

    Hi, i want to check the status of a job and also send a mail when a job is cancelled. Is there any function  module which does that , also i want check the jobs across various time periods and not of today.... Its urgent, Answers will be rewarded, Re

  • Clean Install of Bootcamp with Lyon, Windows stuck on "Expanding windows files"???

    I just purchased a new MacBook Pro and before converting any of my files over from my older MacBook I wanted to download Lyon and install my Bootcamp partition.  I have Installed Lyon, Burned my Windows support software disc and started the Bootcamp

  • Oracle client for ancient AIX 4.2 on PowerPC

    Can someone point me to the Oracle client software for an ancient AIX (4.2.1) system? The target database is 10.2.0.3 on Linux. The ability to connect to the current DB from the old server would greatly facilitate the migration. Full or instant clien

  • SSRS BgColor FILL

    Hi, Need a help in SSRS . i want to change the row color irrespective of values (NULL also) based on a condition . please find the below example Name A1 B1 C1 A         1 B              2 C                      3 in the above example , i want to get

  • Passing Params w/ Wild Cards

    Using Reports and Forms server, I am passing parameters from a web form to a web report. When I pass a parameter to the report, like the word NEWSPAPER, things are great. When I try to add a wild card to the parameter, like NEW%, things don't work so