Keep Losing my Libray

Hi guys,
I keep losing my iTunes Library. It I exit via the file tab I sometimes get it back.. it I exit using the X or - I lose everything and have to import everything. Then I have to go through it all and un-check unwanted songs and then I have to recreate folders. It is getting really frustrating. Any help would be appreciated.
Thanks a bunch.

See this -> iTunes creates an empty library file in Windows
"Symptoms
Some file scanning software products that are not made by Apple, such as the Sony VAIO Entertainment Platform, may damage your iTunes library. If the library becomes damaged, iTunes may create a new, empty library."

Similar Messages

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Problem with ARD3 keeps losing the cursor

I am having problems with ARD3 whereby I keep losing the cursor when controlling another machine. The cursor is still there but you have to click-drag to see it moving. There was a similar problem a few months ago after a system update and pre ARD 3.1. I used to be able to upload the ARD client and that would solve the problem temporarily. But now that won't even work.
Another thing I notice when that happens is that my "Hidden Dock" stops appearing unless I click in the area. That also happens with my menus. And Expose stops working too.
The only way to get around the problem, is to either restart the computer or leave it for anything up to 1 hr, then it will be fine again.
Does anyone have the same problem?
I use a MacBook Pro DC 2G with 2G of RAM. 10.4.9 and all the latest System Updates including Security Update 2007-04. This started happening even before the 2007-004 security update.
MacBook Pro DualCore 2G Mac OS X (10.4.9)

I find that this happens only if a tool tip comes up after having it over an item in the toolbar however clicking in the remote computer's windows somewhere will bring the cursor back. Additionally switching windows, to say the main ARD window, and then back again will restore it as well.

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

IMac keeps losing network connection

My iMac keeps losing the connection to my AirPort very sporadically, but very often. I keep having to open Network Assistant, choose the AirPort and the network, and re-enter the password. I then get a message that my network connection appears to be working correctly, which it then is. This could happen several times in a few hours.
I have tried creating a new network, but it still happens. We have 6 other devices on this network and do not have a problem with those devices.
Any advice?

LB60 wrote:
What am I looking for in the window that pops up?
here's a (very crude) screen shot of an iStumbler scan on my MBP
my network is called pegasus. see that it broadcasts on channel 11 (2.4 GHz band) ? see also that there are six other networks broadcasting on the same channel ? now, ideally i would change my channel to broadcast on "5" or "6", but since there are so many networks around, even those would give me interference from other networks nearby.
in the end, i decided to hardwire (using ethernet cables) most of my devices to my router (time capsule) in order to avoid interference alltogether.
also, there could be closed (hidden) networks around that only KisMac would be able to pick up.
lastly, as the read about *wireless interference* revealed, there are other sources that could interfere with your network performance: microwave ovens, cordless phones - heck, even enabling bluetooth on your very own Mac could be a source.
as an alternative to running ethernet cables throughout your place, you could consider *powerline adapters* _*such as these*_.
JGG

I got a replacement iPhone 4s, and now it keeps losing service

My last phone dropped in the toilet, so I got a replacement phone cause i had apple care.
When I got this phone i was having problems, but i got help and i fixed it, but now....
It keeps losing service ALL THE TIME...
it goes from Verizon 3g to no bars and just Verizon, and then to "Searching...."
I KNOW ITS NOT MY COMPANY'S FAULT, because verizon is well and it is not like in the mountains where i don;t get service its like all the time and it happens seriously like every 2 minutes, its really annoying because
my messages won't go through
apps wont open or reload
can't make calls
SO YEAH,
please anyone help me please.... <3333

nikkibabyyy7 wrote:
I KNOW ITS NOT MY COMPANY'S FAULT, because verizon is well and it is not like in the mountains where i don;t get service its like all the time and it happens seriously like every 2 minutes, its really annoying
Then why are you even asking here. Obviously you know Verizion could never possibly have network issues.
Every network has issues from time to time, no network, company, or person is perfect.
Try basic troubleshooting from the User's Guide and contact Verizon to ensure they are not having issues.

External drive conntected to Time Capsule keeps losing connection

I've been having this problem since I bought my TC over one year ago. Other than this everything works fine (aside from the occasional need for a restart).
I have an external 500GB drive attached to my 500GB TC via usb. I use the TC strictly for backups and the other drive to host my media files. When I want to use those files I switch on the drive. Only about half of the time does that work. When it does work everything is fine. I see the drive in the finder as expected.
When it doesn't work, I can see the drive name in the finder. But if I click to go into the folder, I get an error saying that the connection cannot be found.
It shows up in the Airport Utility as normal.
Powering the drive off and on does not help.
Relaunching the finder doesn't help either.
The only way I can connect to the drive again is to either logoff and log back into my mac, or restart the TC.
It seems that my computer is remembering some kind of network disk mounting settings that don't get refreshed when I turn on the drive, but then do get refreshed when I logoff and back in. Does anyone know how I could force that refresh to happen? Has anyone had this problem before?
Any suggestions would be much appreciated
PS all my software and firmware are the latest.
Thanks.

OS X fan
This helped meRe: Time Capsule keeps losing connection in Finder
Dec 17, 2013 4:08 AM (in response to whootang12)
Left click on the Finder icon from the Dock and click "Connect to server...", go to recent server and click on your Airport Time Capsule.
THANK YOU!!!!
This solved it for me!

LaCie external hard drive keeps losing connection to Windows 8.1 computer

Hello all,
My LaCie external hard drive (Rugged version) seems like it keeps losing connection to my brand new Windows 8.1 laptop. The laptop is an HP Pavillion 15-p 133cl TouchSmart Notebook which I just got today. Basically, every few minutes, or if I nudge the external
a bit, the computer will seem like it disconnected and reconnected to the external hard drive in a split second and bring it up in the Windows Explorer. This external hard drive doesn't show any problems connecting to any other computer, but it has occurred
with 2/3 ports on this computer so far. I'm a bit worried, because I definitely DO NOT want the files on this external to get corrupted in any way. What should I do? Thanks a bunch.

may I know your external HDD model, to check which USB version to isolate power and cable connection issue
if this is USB 3.0 try to attached at USB 3.0 at your laptop, your laptop has 2 USB 3.0 and 1 for 2.0, for external HDD with USB 2.0 sometimes need more power / more than 1 connection, sometimes the power will loose
but since the trigger it will disconnect if you nudge the HDD, I suggest back up data to your laptop first, try to change with other data or power cable, try also update your laptop chipset
try to check with other device to isolate port issue
may I know if you are using other PC, did your external HDD also will disconnect if you nudge it?
contact your external HDD manufactured to get some suggestion

Keep losing my desktop picture on macbook

I have my macbook pro linked to a samsung syncmaster SA550. i keep losing my desktop picture, when i leave the machine and return it from sleep mode, I am left with a grey screen, sometimes with no icons?

Probably the desktop picture is no longer on the macbook but on the syncmaster. Make sure that the desktop picture (itself, and not an alias) is on your macbook (e.g. the pictures folder) and set it again in the SystemPreferences/Desktop settings.

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?

I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?

What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band? Are you both connecting vie 802.11 a/b/g or n?
The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on.

After updating to ios 8 i keep losing my internet connection, and have to restart every time?

After updating my ipad mini to ios 8, i keep losing my internet connection and have to restart.

Hi Turn Router off for 30 seconds Goto Settings Reset Network Settings After reset you need to enter your router wireless key. Also later check on website for a Firmware update for your router. Cheers Brian

Got my iPhone 4S a few days ago. On orange EE in uk. The phone keeps losing signal (no service) never had this problem before with other makes of phone. Please help, thank you.

Please help. My iPhone 4S keeps losing signal (no service) I am with EE orange uk. The phone is only Agee days old. Never had this issue with previous phones.

Same problem!!!
There are many ways to fix it
First you must change the USB cable... Or download new version iTunes bro...
Or if your laptop says " the usb NOT recognize " try to pull up the laptop charger,
It's work for my device, try this bro !!
Im sorry my english is bad!!!

HT4993 i keep losing my contacts is that a problem with iphones

i keep losing all my contacts in my iphone

It's definitely unusual for your phone to do this. The ring should be about the same on their end, as well as yours. Please try powering off your iPhone, and removing/reinserting the SIM card, and retest the calling. http://vz.to/OeILJo
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

AA3 keeps losing Audio Hardware Setup settings...

I work in a broadcast center with a number of AA3 machines that keep losing their Audio Hardware Setup settings. It keeps switching from the LynxONE drivers to Audition 3.0 Windows Sound. I can find no documentation on this.
I've found that the trigger is when AA3 has "release ASIO driver in background" NOT checked, and the user minimizes it and plays something from another audio program. Then they have to go in and set it back again before AA3 will pass audio again.
Is there any way to prevent this from happening?
Thanks.

In the Options menu. Device Properties. Then you have tabs for Wave In and Wave Out amongst others. Also you may need to also set Device Order from the same Options menu.

Keep Losing my Libray

Similar Messages

Maybe you are looking for