Keep the Ken Burns effect the same?

Hi all,
I'm a new Mac and iPhoto user. When I set the auto Ken Burns effect for a slideshow in iPhoto, it changes how it zooms/pans each time I play it. Is there a way to use the auto feature so that it stays the same each time you view it?
Brian

Brian:
Are you setting the KB effect manually? To keep it the same play after play you have to uncheck the KB effect in the Settings pane and then check the KB checkbox for each slide and set the start and finish view. That way they will be remembered for each subsequent play.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • Pausing at the end of a Ken Burns Effect

    Hi,
    I have a number of photos that I am using within imovie. I am applying a Ken Burns effect to scroll or zoom on the photo. At the end of the effect I would like the photo to pause.
    The viewer would see a photo, the zoom/scroll get to the final position, then the photo held for a couple of seconds.
    Is there a way of acheiving this - i know i can import the photo twice, the first doing the effect, the second with no effect - but how do i get the second photo exactly the same as the first photo after effect?

    I don't understand what "Option-click" means: how is this executed? I
    Hold down the Option key on the keyboard, then click on the Start end of the Start/End thingy. In this context, Option-clicking applies the End settings to the Start, so the clip no longer has an animated zoom.
    I also don't see how one selects the duration of the "pause".
    The whole clip we're making is the pause. It's a second clip that plays after the first (zooming) clip. These directions create a second clip that "pauses" after the first clip zooms.
    Option-dragging the first clip makes a copy that we change into a pause. (Holding down the Option key and dragging the clip to another location duplicates the clip.)
    Hope it makes better sense.
    Karl

  • Limited ken burns effect and exporting out the slide show

    im trying to create podcasts of photos ( perhaps 50 )
    with OPTIMAL ken burns effects panning and zooming
    with my own musical scores using garageband. Using transitions and Voice overs and eventually uploading to a web account with iweb.
    Is it better to create this all in imovie?
    Iphoto is too limited with its very limited KenBurns effect.
    I also dont see the individual time setting option for each image. where is that in iphoto. It seems that every photo has to be the same duration.
    some have recommended iphoto then garageband
    but i see too many limitations with iphoto.
    anyone have similar experiences?

    Yes you can do this with vertical photos.
    Click on the little icon at the top left of the photo thumbnail in your project. This will bring up the photo editing panel.
    If you want the vertical photo to show up full screen, click crop, and pick which portion of the vertical photo you want to show.
    If you want to see the entire vertical photo, click "Fit" and the entire photo will be shown, but there will be black space on either side.
    Now click on "Ken Burns" to add the motion effect.
    When finished click "Done".

  • How do I get photos to automatically have the ken burns effect in final cut?

    New to Final Cut Pro X- would appreciate any help.  I have several photos and want to apply the ken Burns effect, but when I select all and apply the effect, they all have the same movement.  Is there a way to have the automatically have the ken burns effect such as in iMovie 11? 
    Thanks!
    SJB

    It's a few more steps. But you could create a zoom-in for a clip on your timeline, copy it and then select every other clip that you want to zoom in on, and go to Edit>Paste Effects. The KB effect will be applied to each of the selected clips. Then do a KB  reverse zoom with the clip adjacent to the first clip you copied. Copy that and repeat the Paste Effects process for the alternate clips. Hope that's clear.
    Russ

  • Converting slideshow from .mov to iPod loses the Ken Burns effect

    I've been trying to make slideshows from iPhoto that will work on my iPod/iPhone. So far the only process I've found is to export to QT from iPhoto, then take that .mov and "convert for iPod". This works fine, however I noticed the nice Ken Burns effect is now gone.
    Any thoughts?

    Use a different app to make the movie.
    But, if the destination is an iPod screen, then it's always going to be compressed heavily, so quality is always going to suffer. The same thing happens when your high quality photos are burned to DVD and folks wonder what's gone wrong - but it's the format of DVD itself that's the problem.
    Other than that:
    iPhoto's export options are pretty thin. Using something like PhotoToMovie or Final Cut Express in conjunction with Quicktime Pro will give you exported movies up to HD quality.
    Regards
    TD
    Message was edited by: Terence Devlin

  • How to manually zoom in using the Ken Burns effect

    I love the way the Ken Burns effect zooms in on a photo. But it isn't optimally positioned on my photo. So I want to manually control this effect from start to finish of the duration. I understand how to slide left, right, top or down but its not obvious how to make it zoom in or out from start to finish. Can someone tell me how to do this.
    Thanks in advance.
    --Mickey

    pick the photo in the slide show - click on the settings icon in the tool bar and on this slide - click on start next to Ken Burns at the bottom of the settings window and zoom the photo to the desired size using the zoom in the lower right hand corner and pan to the desired starting point by dragging - click end and do the same for the final position and you have it
    LN

  • Selecting photo then clicking "Fit" does NOT turn off the Ken Burns effect.

    Trying to wean from iMovieHD.  I'm having trouble mastering what seems to be more limited Ken Burns effect functionality in iMovie11.   I don't seem to have the range, say, left-to-right, as I did in either iPhoto or in iMovie HD.
    So, I figured for now I'd turn off the Ken Burns effect on all the stills in this project.  I've tried selecting one photo, getting into the Fit/Crop/KB effect viewer, then clicking Fit, then Done.  But the photo keeps the KB effect that had been applied to it.
    I tried changing all photos in Preferences and that didn't change anything either. 
    Hopefully I'm just missing something?  Thanks for any help, everybody...

    Nevermind.  Got it.  As I'd hoped, user error.

  • Can I turn the Ken Burn Effect off when using the iMovie app on my iPod touch 5th generation?

    I have an iPod touch 5th generation and I'm trying to make a movie using the iMovie app. When I put an image on there it moves from side to side and zooms in and out. I believe this is called the "Ken Burn Effect". Is there any way that I can turn the Ken Burn Effect off without having to adjust the image position and zoom level to be the same for the start and end points?

    Hello MisfitxCaleb
    Unfortunately, the Ken Burns Effect cannot be turned off in iMovie for iOS. Like you mentioned above, having the photo at the same start and end point is the best way to make it appear as if it isn't moving/zooming.

  • Can I fine tune the Ken Burns effect?

    I'm using iPhoto 6 for the first time - making a slide show. I turned off the default Ken Burns effect for all slides, but I'm manually setting the KB effect on some slides. I like the ability to specify the starting view and the ending view - such as starting the view with a close-up of a bottle of wine, then zooming back to show the table full of food and the people around it, but....
    Is it possible to "fine tune" the KB effect as follows: Have it show the starting view for a specified period of time (e.g. one second), then specify the transition time (e.g. 3 seconds), then have it show the final view for a specified period of time (e.g. 2 seconds).
    I.e., I'd like to set up the KB effect so that it "lingers" on the starting view and ending view for a time period that I specify. Is this possible? (If not, this would be a great feature to add in a future release.)

    You can kinda do that in iPhoto. It's possible to set individual slide display times with the Adjust pane in the slideshow mode if you don't have the Fit slideshow to Music option selected. You can also set transitions and speed of transition.
    To get music to end at the end you will have to estimate the time of the slideshow and use music with a time close to that time. I use a blank, black slide at the end of my slideshow so that the music will end to a blank screen if I miss the timing a bit instead of starting over.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Inserting Photos and the Ken Burns Effect

    First
    I have inserted a number of photos from iPhoto onto the timeline via the "Photos" panel in the "Media" section. After adding these pictures to the timeline, with transitions, etc. I realized that I wanted to add some pictures before the current ones in the timeline. How would I do this easily?
    Second
    These pictures are motionless, which is boring, and I want to add the Ken Burns Effect. However, I don't want the same effect on every picture is there some way to randomize the effect, similar to the way iPhoto does in its slideshows?
    Thanks!

    I have inserted a number of photos from iPhoto onto the timeline via the "Photos" panel in the "Media" section. After adding these pictures to the timeline, with transitions, etc. I realized that I wanted to add some pictures before the current ones in the timeline. How would I do this easily?
    Just select the photos (Command-click) you wish to import, and drag them directly from the photos panel down to the timeline at the point you want to insert them.
    is there some way to randomize the effect, similar to the way iPhoto does in its slideshows?
    Not in iMovie. You would have to vary them individually.
    However, you can use Photo-to-Movie to accomplish this. With this app, you drag in the photos and let the application create the effects. You can also individualize the effects yourself. Photo to Movie

  • Cant turn off the ken burns effect

    The ken burns effect (why is that on by default for crissakes?) cannot be tuned off!!!! I have about 10 images in a movie made up of about 100 still images on which the ken burns effect cannot be turned off. I tried unchecking the ken burns check box & hitting the update button, but it immediately turns itself back on!! Tis is with iMovie 3, and as i said, it affects only the first 10 or so images in this particular project.

    I know, sometimes it feels like Ken Burns has a mind of its own. It WILL do what you want, but first you have to figure out its rules.
    The most important is that all of the Ken Burns settings, the KB checkbox, zoom, pan and duration are controlled by the LAST imported clip you made, or a previously-imported clip you clicked on. THAT's what sets the default setting for your next import(s). (A very nice feature, by the way, for it lets you apply the Ken Burns settings of one clip to the next photos you import. You don't have to reconfigure settings each time.)
    That also means that when you uncheck the KB checkbox that won't "stick". When you click on some other clip it may change.
    So when updating an existing clip, the trick is to select the clip, THEN adjust the Ken Burns settings, THEN Update the clip.
    A complicating factor is that previously-imported photos to which special effects or other editing has been applied are no longer considered Ken Burns clips, so clicking on them doesn't have the same result.
    So pay close attention to what you click on, and even closer attention to whether or not there is a clip selected or an image selected in the Photos pane selected. iMovie will select a photo on its own when you haven't selected something.
    It works like you want, but first you have to see that what it does is you want.
    Karl

  • Problems with seeing photos while working on the Ken Burns Effect

    I am having difficulty seeing my photos when I use the Ken Burns Effect. All I get is a black screen. It won't let me adjust anything on the photos because the screen is black. Please Help

    So I have kind of the same issue here but it is slightly different. I tried all of the tricks that have been posted here but I am getting the black screen on brand new pictures that are imported both with and without the ken burns effect on them. I don't seem to have the problems on pictures that are already in the video with/without the KB effect.
    I have also tried to do it under another user account, downgraded iMovie HD 6 from 6.0.3 down to 6.0 and 6.0.2 and nothing seems to help. I have even removed the plists on both ~/Library/Preferences/com.apple.iMovie.plist along with anything in /Library/Preferences having to do with iMovie without any success. The only solution that I am resorting to is to just use a different computer all together or format the drive on my computer.
    Any solutions? I have a video that needs to be down by the end of next week...

  • How do I get rid of the Ken Burns effect on my photos

    I would like to get rid of the Ken Burns effect on my photos I addes to my video. How do I do that

    When you create a New Project and give it a name, the next thing you should always do is go to File>Project Properties and make sure in 'Initial Photo Placement you have selected either Fit or Crop. It seems the default setting is the Ken Burns annoyance.

  • How can I turn off the ken burns effect on iMovie? If I crop the picture it still persists!

    I cannot turn off ken burns on iMovie for the life of me! Everyone is telling me to fit the photo or stop it, which I have done. However, when cropped the ken burns effect is still there in full force!!! What can I do to turn off this dreadful effect?

    iMovie forum for an answer from the users in there who will most likely be able to help you out faster : https://discussions.apple.com/community/ilife/imovie

  • Using the Ken Burns effect in I Photo 5

    The first time I worked on a slide show I was able to use the Ken Burns effect with no problems. Later on opening I Photo and clicking on slide show I no longer have the controls for the Ken Burns effect. There is just a blank space where they should be. Why did this happen ? How do I get the controls back?
    Any suggestions would be appreciated. Thanks, Vernon

    Vernon:
    Welcome to the Apple Discussions. What may have happened is that one or more items within the iPhoto application package have had their permissions changed so you do not have access. Run Disk Utility and repair disk permissions. If that doesn't help try moving the application to the desktop and making a duplicate of it-select it and type Command-D. Now move the duplicated to the applications folder and rename to just iPhoto. Now see if the KB controls come back.
    Next would be a reinstallation of iPhoto. You'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Now reinstall iPhoto 5 and immediately update to the latest version. Then repair disk permissions.
    Hope this has been of some help. Good luck.
    OT

Maybe you are looking for