Keep using when fully charged and plugged in?

I was wondering if i can continue to watch netflix while my MBP is fully charged and plugged into AC power. Does this hurt the battery, or should I be okay? Any answers are greatfully accepted!!
Thanks!!

rachelleco wrote:
P.S. WIll it still be okay for a few hours at a time? I typically watch for 2-3 hours at a time
Leaving it plugged in is much better for the battery (as long as it's not overheated) than unplugging it and letting it empty out frequently. I leave mine plugged in for the entire work day, unplugging only to transport it in the morning and evening, and after over a year it still has 97% of its original capacity.
Also, on the Apple laptops that have non-removable batteries, Apple says there is no need for the "completely discharge once a month" calibration procedure. In other words, if you have a newer Apple laptop where the battery can't be removed, those are essentially maintenance-free. You just use it.

Similar Messages

My iphone wont respond when fully charged and kept on mains charge is this right?

My iphone screen wont respond when fully charged and kept on mains charge is this the norm?

No that isn't normal.

Is it ok to using iPhone when it's fully charged and plugged in?

I wonder if after my phone is fully charged and still plugged in, can I use it normally? Does it harmful to the phone and battery?

leon_123 wrote:
So, if it use from battery and then filled by charger continously, I don't think I should do that for a long time.
No worries.
Read here for info on battery: http://www.apple.com/batteries/

Using/ Running App harmful to fully charged and plugged in?

Hi,
A quick question.
Is running an app while my batt is fully charged and still plugged in harmful to my iphone 4s battery?
Will the rate of wear and tear of the battery therefore be increased or will the power source be directed away from the battery and into the circuit board directly.
Thank You for your time and replies.

When the iPhone battery is fully charged power is no longer directed to it. You will do now harm, just make sure to do a full charge cycle at least once per month.

Powerbook G4 Aluminium 1,67 GHz keeps sleeping when fully charged

Hi!
Just got a Powerbook from a friend of mine for no small price, and am feeling as if I made a HUGE mistake.
It worked perfect for 3 weeks and suddenly since yesterday, once the battery is fully charged and the indicator lamp turns green, the Powerbook would suddenly go to sleep. I wake it up again only to make it go back to sleep. It works fine when I remove the power cable and run it on battery, or when the Powerbook is charging.
I tried looking in the system log but the dreaded Trackpad line "Power Management received emergency overtemp signal. Going to sleep", is nowhere to be found, instead I have a line like "kernel[0]: hibernate image path: /var/vm/sleepimage" and it goes to sleep immediately after. Nothing precedes this line.
I am stymied, some say it is a logic board problem. My PB has 2 year warranty from the store I bought it from, I can take it back, but the loss in production time would be a lot : ( Any help?
PB G4 SD, HD 1,67 Mac OS X (10.4.9)

Hey Dave,
Thanks for your input. I did install "Temperature Monitor" after reading your responses on other forum threads. There are no untoward spikes, though as the day progresses and I open more documents or do CPU intensive tasks, the temperature naturally spikes. I have had up to 62°C (143F) CPU temperatures and 45°C (113F) HDD and Trackpad temperatures. These I thought were under the temp specs mentioned in the program.
As I work in a huge greenhouse affected room , with the summer coming up, the temperatures in the room go up to 85F, and the PB keeps sleeping ever more often. Well it is back to AppleCare with this. Disappointed though.

My MacBook Air won't turn on, despite being fully charged, and plugged into the power jack. What should I try?

I double checked the power connection, it's good. The charge light is green, so it should be charged and turn on, right? When I push the power button--nothing no startup sounds, nothing on the screen, keys don't light up. It's completely dead, as if it is powered off. I don't know if this could be having an effect on it...I upgraded to the latest operating system (Yosemite) a couple of days ago. After that, it wouldn't recognized our Epson WIFI printer. The printer was visible as an option under print, but when selected there was a message saying it wasn't connected. Even after going through the steps to add it agaiIn, after printing one document, then trying to print the next, the "printer was not connected" again. I gave up and shut it down for the day. Used it last night without any issues (except for being unable to print.). Now, this morning, nothing.

Try a SMC reset:
http://support.apple.com/en-us/HT201295
Ciao.

Macbook Pro suddenly turned off when fully charged and won't restart. Charger not working either coincidently

My 2 year old 13" MacbookPro suddenly turned off, presumably when the screen automatically dimmed (or went to sleep?) and now it won't turn back on. It was at 96% charge and now when I use the battery checker on the side, nothing shows up. No lights or anything. The charger doesn't seem to work either even after trying it on different outlets. This has never happened before but it has been harder to wake it from sleep in the last 6 months or so. I would have to push the On/Off button for a sec and the screen would turn back on. Also when I turn it on, the password screen is sometimes off-centered..weird.
I'm using Yosemite, the latest version..not sure what it is and can't check right now...I had to go use a PC to ask this question >_<

Try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao

Iphone 4S stopped working when fully charged and it will not turn on. what should i try?

My brand new, fully charged, working for nearly 2 days iPhone 4S suddenly stopped working and will not turn on. I've tried recharging and it's unresponsive. What should I try to do?

I've had a similar thing happen to my new iPhone 4S three times. It gets hot and doesn't respond to either button -- the screen remains completely off. I have to hold down both buttons for awhile until the Apple appears and then everything seems fine... until it happens again. Once it happened overnight, so I missed my alarms. Another time, it was while I was at dinner.
Always it happens when the iPhone is on standby with the screen off and nothing particular happening with it. The iPhone 4S is brand new, hasn't been dropped, hasn't been messed with in any way.
Is there a way I can get a trace of what happened before I reset it? The system log (visible in "System Status" and other apps) starts with the reset, so it doesn't help here.

HT201401 My IPhone4 is in a coma. Will not reboot even when fully charged and using reboot techniques listed in forum. Any suggestions? I have some pics and contacts I need. I did not backup!

I would appreciate any suggestions you might have. I did not back up my IPhone4 - stupid on my part. It just quit the other day. It is in a coma. I have tried recharging and rebooting to no avail. My greatest concern are several pictures that I cannot replace. Is their an internal sim card that perhaps could be recovered. I need to return the phone to Verizon as they mailed me a replacement due to the fact that no one at the local Verizon store could awaken the phone. Please help if you have ANY suggestions! Of course, i will backup everything in the future - just hoping for a chance with these pics and contacts.

I ceaned the fan, the computer shuts down when I hit ENTER after logging in (again, i have a password set)
I did manage to do a a start-up repair w/out the comp shutting down half way through. This was in the detailed diagnosis and repair:
Root Cause Found:
Boot critical file d:\windows/system32\kdcom.dll is corrupt.
Repair action: File Repair
Result: Failed. Error Code= 0x490
Time Taken:5460ms
Repair Action: system restore
result: Completed successfully. Error Code= 0x0.
I also get a message::
Windows cannot repair this computer automatically.
If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer. If you continue to see this message, contact your system administrator or computer manufacturer for assistance.
**any of this help you??**
I appreciate your help!!

HT201263 iPad screen went black when fully charged and would not come out of sleep mode, turn on or off and did nothing when connected to USB port?

I really do not want to restore this iPad if I can find another solution. I had to let the battery drain completely in order to prepare it for restore, so I'm prepared to do that if I must.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

MacBook Pro power adapter doesn't show green light when fully charged

I've had a quick search through the communities and there are a lot of posts about chargers and indicator lights, but I'm not sure I'm really satisfied about my own issue so I thought I'd ask anyway.
Basically, I bought a spare power adapter (genuine Apple 85W MagSafe2) for my new 15" Retina MacBook Pro in a store the other day, to save me lugging my main adapter to and from work all the time.
Using it for the first time made me realise that the adapter I got with my MBP behaves slightly differently re: the LED indicators. The new one from the store shows amber until the MBP is fully charged, then solid green once fully charged. This I believe is perfectly normal.
The charger I got with the MBP shows amber whilst charging, but only shows green very briefly when fully charged and then the indicator goes out completely. OSX (10.8.2) still indicates that it is connected to the power source though, and the battery doesn't drain or anything at this point - it definitely appears to be functioning as expected.
Aside from this, I can determine no real difference between the two adapters in terms of charging speed or general functionality, they both appear fine.
I just wondered if anyone else had ever seen this?
I did reset the MBP's SMC settings too, but it made no difference. I'm inclined to think there isn't an issue with the laptop itself since the new adapter's indicators work exactly as I'd expect, but then again the original adapter seems to function perfectly so I'm wondering if there's just some trivial issue with the green LEDs or something like that.

Really doesn't matter if anyone else has or has not seen something like what you have. Your original adapter is faulty in one way or another and you should take it in to Apple with your rMBP to show them what is happening and Ask Nicely for a new one that works correctly.

Macbook air (11 inch) shows very low battery percentage when the charger is plugged in

My macbook air cannot be used when the charger is plugged in. The battery percentage will go all the way down to 0% very soon and the computer will shut down then. For example, it shows 1:40 left in the battery when I did not plug in the charger, but once I plug the charger in , it will show 0:43 left instantly. What might be the problem and how to resolve it?
PS: the macbook air can be charged when I shut it down. And it is no problem when the battery is not empty and the charger is not plugged in.

Thank you very much. Here is the information:
Full Charge Capacity (mAh):          4128
Cycle Count:          346
Condition:          Normal
Any other suggestions?
Do I need to make an appointment with the Apple store genius bar?

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

Does keeping a macbook pro plugged in even when fully charged damage the battery in any way?

Does keeping a macbook pro plugged in even when fully charged damage the battery?

no it will not, your battery stops charging when it reaches 100%. you can verify this if you'd like to through system report - power.
once in a while however, it's best to use it under it's own power and charge it back up once it's down to 75% to keep the battery in optimal condition.

Does it adversely effect the battery to keep the IPad plugged in when fully charged?

Does it adversely effect the battery to keep the IPad plugged in when fully charged?

Copied from Texas Mac Man ...
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Keep using when fully charged and plugged in?

Similar Messages

Maybe you are looking for