Keep wifi on/off for shutdown what is best practice?

hi all
i was wondering what the general consensus was for turning wifi on and off. i normally shut down my MBP during the night, and turn my wifi off as well.
is it worth to turn the wifi off at all, or can i just leave it on?
the reason i ask is because it would be nice to just power on and have it set up without taking the extra (5 seconds) to turn it on.
thoughts? what do you all do? what is considered best practice here?

Radium88 wrote:
007, i was talking about my MBP not the actual router.
thanks for the reply
Well in your first post you say, "I shut down my MBP during the night", and then say, and turn my WIFi off as well".
If you shut down your MBP then the WiFi in the MBP is off to begin with. No power to the MBP is No power to the WiFi card in the MBP. So I assumed you were talking about your WiFi router.

Similar Messages

What are best practices for managing my iphone from both work and home computers?

What are best practices for managing my iphone from both work and home computers?

Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans withiTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
tt2

What is best practice for...

What is best practice for deploying applications through the IPCU to 10 ipads?
I'm looking for a complete step-by-step of the best way to do this.
Thanks in advance!

Just place a modem into any console port. Ideally you use a terminal server, but is not always really needed.

What's best practice for logging messages in pageflow?

What's best practice for logging messages in pageflow?
Workshop complains when I try to use a Log4J logger by saying it's not serializable. Is there a context similar to JWSContext that you can get a logger from?
There seems to be a big hole in the documentation on debug logging in workflows and JSP pages.
thanks,
Rodger...

Make the configuration change in setDomainEnv.cmd. Find where the following variable is set:
LOG4J_CONFIG_FILE
and change it to your desired path.
In your Global.app class, instantiate a static Logger like this:
transient static Logger logger = Logger.getLogger(Global.class);
You should be logging now as long as you have the categories and appenders configured properly in your log4j.xml file.

What is best practice for installing Yosemite

I am currently on OS X Mavericks version 10.9.5 Macbook pro 13. 2.6 ghz intel for i5, 8gb 1600 mhz ddr3.
I am now downloading yosemite 10.10.1 but since i've been reading all these negative feedback so far, i am having second thoughts if i should continue to install the upgrade or not.
Any suggestion What is best practice for installing Yosemite? Or is it not yet time to upgrade since the platform is premature yet?
Thanks in advance.

Check your apps are compatible with 10.10 - roaringapps.com
http://www.etresoft.com/etrecheck can show what is running & installed - look for updates on the developer own sites.
If you have many kernel extensions or startup items look for updates to them too
Take a full bootable backup to another disk via Carbon Copy Cloner, Super Duper! or Disk Utility
Disconnect the backup before you begin any install (ideally set it aside & leave it untouched incase you need to go back to 10.9)
Personally I prefer a clean install when there are signs of multiple migrations (if you have upgraded several OS for a period of years). Setup Assistant/ Migration Assistant can import user data from a backup, but consider that Apps & 'other data' should be manually reinstalled from the latest versions.
If you clean install (erase the HD before installation) then make sure you deauthorise iTunes & any other apps that are associated online (like find my Mac).
Basically the steps you would take before selling a Mac…
What to do before selling or giving away your Mac - Apple Support

What oracle best practices in mapping budgeting to be implement at item

Dear Consultant's
Really i need you values Consultantancy
What oracle best practices in mapping budgeting to be implement at item category level or item level
I want to check fund at encumbrance account according to item level
Case:
I have there item category
One is Computer's items
Tow is printer's items
Third is food's item's
I want to implement my budget on item category level
Example:
I want my purchase budget for item with printer's type not exceed 30000USD
And For item with type food's not exceed 45000usd
How to map this in oracle application
The modules implemented on my site
(GL, AP, AR, INV, PURCHASING, OM)
Please give me the oracle best practice that handle this case
Thanks for all of you

Hi,
It is really difficult to have Budgetary Control on Inventory Items in Average Costing enviornment as you can have only one Inventory Account at the Inventory Organization level.
You have to modify your PO / Requisition Account Generator to populate the Encumbrance Account in PO / Requisition based upon item category. Moreover, the "Reverse Encumbrance" flag in your Inventory Org needs to be unchecked so that the encumbrances are not revered when the goods are received.
Gajendra

What is best practices

hi gurus,
I would like know what is best practices. Where we will use this best practices. What are the benefits we will get through best practices. For whcih industry it is useful.
If any one help me in this following subject . I will be value added for me.
Thanks in advance

Dear nag
SAP Best Practices facilitate a speedy and cost-efficient implementation of SAP Software with a minimal need for planning and resources. SAP Best Practices are suited to the enterprise requirements of different industries. They integrate well with varying financial accounting and human resource management systems and can be used by enterprises of any size.
=> SAP Best Practices are a central component of the second phase of ValueSAP (Implementation). The ValueSAP framework guarantees value throughout the entire life cycle of SAP Software.
=> SAP Best Practices are a cornerstone of mySAP.com, since all the key elements of mySAP.com are linked to SAP Best Practices through preconfiguration. Key elements include:
          <> Preconfigured collaborative business scenarios
          <> Preconfigured mySAP.com Workplaces
          <> Preconfigured access to electronic marketplaces
          <> Preconfigured employee self-services
Features
SAP Best Practices consist of:
An industry-specific version of AcceleratedSAP (ASAP) including various tools such as the Implementation Assistant, the Question & Answer database (Q&Adb), detailed documentation of business processes and accelerators:
The industry-specific version of ASAP provides extensive business knowledge in a clear, structured format, which is geared towards the needs of your enterprise. You can use the reference structures with industry-specific end-to-end business processes, checklists and questions to create a Business Blueprint. This document contains a detailed description of your enterprise requirements and forms the basis for a rapid and efficient implementation of an SAP System.
Preconfigured systems providing you with the industry-specific and/or country-specific Customizing settings you need to effectively implement business processes relevant to your enterprise
Key elements include:
-> Tried and tested configuration settings for the critical processes in your industry including special functions that are standard across all the preconfigured systems
-> Documentation on configuration, which provides project team members with a comprehensive overview of the system settings
-> Master data, which you can easily change or extend, for example, organizational structures, job roles, and customer/vendor master records
-> Test catalogs that can be used to replay test processes in training courses, for example, to help you gain a better understanding of how processes work in the system
Thanks
G. Lakshmipathi

What means "best practice"?

Hello everyone,
I have always seen some methods are described as "best practice". I am wondering what means "best practice", an algorithm?
Thanks in advance,
George

Thanks RXon,
It means they are usually faster, more memory
efficient, and just generally better than the
[old/other] oneSo, it is a general concept (means a best method) and not specific to any topic or any technologies. Am I correct?
regards,
George

I keep getting kicked off my apps, what can i do?

My ipod keeps kicking me off my apps. How can I fix this?

- Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Doenload/install any new app.
- iOS: Troubleshooting applications purchased from the App Store

What are best practice for packaging and deploying j2EE apps to iAS?

We've been running a set of J2EE applications on a pair of iAS SP1b for about a year and it has been quite stable.
Recently however we have had a number of LDAP issues, particularly when registering and unregistering applications (registering ear files sometimes fails 1st time but may work 2nd time). Also We've noticed very occasionally that old versions of classes sometimes find their way onto our machines.
What is considered to be best practice in terms of packaging and deployment, specifically:
1) Packaging - using the deployTool that comes with iAS6 SP1b to package is a big manual task, especially when you have 200+ jsp files. Are people out there using this or are they scripting it with a build tool such as Ant?
2) Deploying an existing application to multiple iAS's. Are you guys unregistering old application then reregistering new application? Are you shutting down iAS whilst doing the deployment?
3) Deploying ear files can take 5 to 10 mins, is this normal?
4) In a clustered scenario where HTTPSession is shared what are the consequences of doing deployments to data stored in session?
thanks in asvance for your replies
Owen

You may want to consider upgrading your application server environment to a newer service pack. There are numerous enhancements involving the deployment tool and run time layout of your application that make clear where you're application is loading its files from.
If you've at a long running application server environment, with lots of deployments under your belt, you might start to notice slow downs in deployment and kjs start time. Generally this is due to garbage collecting in your iAS registry.
You can do several things to resolve this. The most complete solution is to reinstall the application server. This will guarantee a clean ldap registry. Of course you've got to restablish your configurations and redeploy your applications. When done, backup your application server install space with the application server and directory server off. You can use this backup to return to a known configuation at some future time.
For the second method: <B>BE CAREFUL - BACKUP FIRST</B>
There is a more exhaustive solution that involves examining your deployed components to determine the active GUIDS. You then search the NameTrans section of the registry searching for Applogic Servlet *, and Bean * entries that represent your previously deployed components but are represented in the set of deployed GUIDs. Record these older GUIDs, remove them from ClassImp and ClassDef. Finally remove the older entries from NameTrans.
Best practices for deployment depend on your particular environmental needs. Many people utilize ANT as a build tool. In later versions of the application server, complete ANT scripts are included that address compiling, assembly and deployment. Ant 1.4 includes iAS specific targets and general J2EE targets. There are iAS specific targets that can be utilized with the 1.3 version. Specialized build targets are not required however to deploy to iAS.
Newer versions of the deployment tool allow you to specify that JSPs are not to be registered automatically. This can be significant if deployment times lag. Registered JSP's however benefit more fully from the services that iAS offers.
2) In general it is better to undeploy then redeploy. However, if you know that you're not changing GUIDs, recreating an existing application with new GUIDs, or removing registered components, you may avoid the undeploy phase.
If you shut down the KJS processes during deployment you can eliminate some addition workload on the LDAP server which really gets pounded during deployment. This is because the KJS processes detect changes and do registry loads to repopulate their caches. This can happen many times during a deployment and does not provide any benefit.
3) Deploying can be a lengthy process. There have been improvements in that performance from service pack to service pack but unfortunately you wont see dramatic drops in deployment times.
One thing you can do to reduce deployment times is to understand the type of deployment. If you have not manipulated your deployment descriptors in any way, then there is no need to deploy. Simply drop your newer bits in to the run time space of the application server. In later service packs this means exploding the package (ear,war, or jar) in to the appropriate subdirectory of the APPS directory.
4) If you've changed the classes of objects that have been placed in HTTPSession, you may find that you can no longer utilize those objects. For that reason, it is suggested that objects placed in session be kept as simple as possible in order to minimize this effect. In general however, is not a good idea to change a web application during the life span of a session.

What is best practice for dealing with Engineering Spare Parts?

Hello All,
I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
Our current process is as follows:
All materials are set up as HIBE's
Each material is batch managed
The Batch field is used for the Bin location
We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
Regards
Chris

Hi,
I hope all the 50000 spare parts are maintained as stock items.
1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
3. By doing GI based on reservation, qty can be tracked against the order & equipment.
As this question is MM & WM related, they can give better clarity on this.
Regards,
Maheswaran.

What is best practice for conditional rendering?

i have a set of radio buttons that conditionally render another set, which in turn conditionally render a 3rd set.
i am doing this by using a valueChangeListener on an h:selectOneRadio
when i click yes on the 1st set it renders the 2nd set.
when i click yes on the 2nd set it renders the 3rd set.
when i click no on the 1st set now it correctly removes the 2nd & 3rd sets, the method also nulls the values.
when i click yes on the 1st set, it renders the 2nd set with the old values even though they were nulled. and i can see in the debugger they are still null.
so there seems to be an issue updating the model, but i dont know what that issue is. im sure it just has something to do with the way i am trying this conditional render. please see below for my first field and my valueChangeListener method.
any help with what is a best practice for this scenario would be greatly appreciated.
<h:panelGrid id="grid20a" columns="1">
                         <h:outputText value="Does this consult pertain to a specific "/>
                         <h:outputText value="planned or ongoing research project?: *"/>
                    </h:panelGrid>
                    <h:selectOneRadio id="specificResearch1" value="#{ethicsConsultBacking.bean.specificResearch}"
                         layout="lineDirection" required="true"
                         valueChangeListener="#{ethicsConsultBacking.processValueChangeSpecificResearch}">
                              <f:selectItems value="#{ethicsConsultBacking.yesNoMap}" />
                              <a4j:support event="onclick" reRender="form"/>
                    </h:selectOneRadio>
                    <h:message for="specificResearch1" styleClass="redText" />
public void processValueChangeSpecificResearch(ValueChangeEvent e) throws AbortProcessingException
          String newValue = e.getNewValue().toString();
          //reinitialize
          this.setRenderHumanSubjectResearch(false);
          this.setRenderIrbSection(false);
          this.setRenderIrbProtocolNumber(false);
          this.getBean().setHumanSubjectResearch(null);
          this.getBean().setPrimaryIrb(null);
          this.getBean().setIrbStatus(null);
          this.getBean().setIrbProtocolNumber(null);
          //check condition
          if (newValue.equalsIgnoreCase(this.YES))
               this.setRenderHumanSubjectResearch(true);
           * Clearing validation messages.
           * This will get around the issue with having a field
           * on the form that is both required & immediate.
          Iterator it = this.getFacesContext().getMessages();
          while (it.hasNext())
               it.next();
               it.remove();
          this.getFacesContext().renderResponse();
     }i also tried doing this another way by just using an action method attached to the a4j:support tag, but that introduced a different set of issue. so ill leave that out for now unless that is the direction someone would like to direct my issue in.
Thanks in advance

Similar issue is covered and explained here: [http://balusc.blogspot.com/2007/10/populate-child-menus.html]. Not sure if it solves your problem as you're using ajax4jsf whereas I don't, but it might give new insights. To the point you might need to bind the component(s) and use setValue(null) or setSubmittedValue(null).

Exchange 2010 - What is best practice for protection against corruption replication?

My Exchange 2010 SP3 environment includes DAG with offsite passive copy. DB is backed-up nightly with TSM TDP. My predecessor also installed DoubleTake software to protect the DB against replication of malware or corruption to the passive MB
server. Doubletake updates offsite DB replica every 4-hours. Understanding that this is ultimately a decision based on my company's risk tolerance, to the end, what is the probability of malware or corruption propagation due to replication?
What is industry best practice: do most companies have a 3rd, lagged copy of the DB in the DAG, or are 3rd party solutions such as DoubleTake commonly employed? Are there other, better (and less expensive) options?

Correct. If 8 days lagged copy is maintained then daily transaction log files of 8 days are preserved before replaying them to lagged database. This will ensure point-in-time recovery, as you can select log files that you need to replay into the database.
Logs will get truncated if they have been successfully replayed into database and have expired their lagged time-stamp.
Each database copy has a checkpoint file (.chk), which keeps track of transaction log files status.
Command to check the Transaction Logs replay status:
eseutil /mk <path-of-the-chk-file> - (stored with the Transaction log files)
- Sarvesh Goel - Enterprise Messaging Administrator

What are Best Practice Recommendations for Java EE 7 Property File Configuration?

Where does application configuration belong in modern Java EE applications? What best practice(s) recommendations do people have?
By application configuration, I mean settings like connectivity settings to services on other boxes, including external ones (e.g. Twitter and our internal Cassandra servers...for things such as hostnames, credentials, retry attempts) as well as those relating business logic (things that one might be tempted to store as constants in classes, e.g. days for something to expire, etc).
Assumptions:
We are deploying to a Java EE 7 server (Wildfly 8.1) using a single EAR file, which contains multiple wars and one ejb-jar.
We will be deploying to a variety of environments: Unit testing, local dev installs, cloud based infrastructure for UAT, Stress testing and Production environments. **Many of our properties will vary with each of these environments.**
We are not opposed to coupling property configuration to a DI framework if that is the best practice people recommend.
All of this is for new development, so we don't have to comply with legacy requirements or restrictions. We're very focused on the current, modern best practices.
Does configuration belong inside or outside of an EAR?
If outside of an EAR, where and how best to reliably access them?
If inside of an EAR we can store it anywhere in the classpath to ease access during execution. But we'd have to re-assemble (and maybe re-build) with each configuration change. And since we'll have multiple environments, we'd need a means to differentiate the files within the EAR. I see two options here:
Utilize expected file names (e.g. cassandra.properties) and then build multiple environment specific EARs (eg. appxyz-PROD.ear).
Build one EAR (eg. appxyz.ear) and put all of our various environment configuration files inside it, appending an environment variable to each config file name (eg cassandra-PROD.properties). And of course adding an environment variable (to the vm or otherwise), so that the code will know which file to pickup.
What are the best practices people can recommend for solving this common challenge?
Thanks.

HI Bob,
As sometimes when you create a model using a local wsdl file then instead of refering to URL mentioned in wsdl file it refers to say, "C:\temp" folder from where you picked up that file. you can check target address of logical port. Due to this when you deploy application on server it try to search it in "c:\temp" path instead of it path specified at soap:address location in wsdl file.
Best way is re-import your Adaptive Web Services model using the URL specified in wsdl file as soap:address location.
like http://<IP>:<PORT>/XISOAPAdapter/MessageServlet?channel<xirequest>
or you can ask you XI developer to give url for webservice and username password of server

What is best practice for integration with freight forwarders?

Hello,
We are looking into the possibilities for automatically exchanging data with one of our freight forwarders. We will send them our shipment information and they will send back shipment status and date information including some additional information like the house bill. Sending the shipment data from our SAP (ECC 6) system is no issue, we have done that before. What is new to us is receiving back the status updates from the forwarder. Is there a kind of best practice of where to store this information on the shipment (or in a separate tabel) and what standard function module or BADI to use for this?
We are using ECC 6.0 sales and distribution, but no transportation management or SCM modules.
Would, like to hear the experiences of people who have done this type of intergration with their forwarders.
Regards,
Ed

SAP have added SAP TM 8.10 as a separate package which is also integrated with R/3 which means, a separate server is required if SAP TM needs to be implemented which will take care of your expectations. For more information on this, search in Google so that you will get couple of documentations on this topic.
G. Lakshmipathi

Keep wifi on/off for shutdown what is best practice?

Similar Messages

Maybe you are looking for