KeepAlive not working with WL 6.1 SP1 in a Sun box.

Hi all,
We deployed the same exact application in a linux and in a solaris box (for QA
purposes), and noticed that the keepalive configuration is not been respected
in the Sun box. If we telnet to our web server, we read the returning headers
including the following: Connection: close
And actually, the telnet connection is really closed right away.
Those particular boxes are NOT behind any firewall or load balancer.
Any clues?
Also, if by any chance anybody has seen the following problem before, please responde:
Behind a cisco firewall and cisco local director, our HTTP connection is been
closed for every request (keepalive not working as explainned above). But, in
the case of a redirect, Internet Explorer tries to reuse the same connection (so
I believe), that is actually hanging there for extra 3 seconds after the headers
are delivered (including the Connection: closed header). This causes IE to hang
for 3 seconds before finally reopenning a new connection with the server and request
for the redirected page. Netscape doesn't experience this problem, and neither
does Mac OS versions of those two browsers.
We saw it happening in all flavors of IE under windows platform.
Vanderlei

I use Mozilla not Netscape but the installation should
be similar. Go to the Release Notes for NS 7.1 (should
be a menu item) and find the Java plug-ins section and
follow that.. As I said before, you might need to copy
a JRE DLL to your NS plugins folder.
Is JRE 1.4.02 is installed correctly, you should have
a Java plugin item in the control panel.I used to run Mozzilla too and removed it when I upgraded NS, which I use for HTLM authoring. Java worked fine with Mozzila.
When I ran the installer again last evening it reported that J2re had been installed sucessfully it took about 30 minutes to do it. Installed version is JAVA 2 Runtime Environment (JRE) Standard Edition Version 1.4.2_X
I checked the control panel as I generally do, and it was there OK. Nothing has changed - will check out The release notes for NS 7.1
Regards and thanks again,
Art.

Similar Messages

Drag and Drop not working with IE11,Firefox or Chrome on Windows 7 x64 SP1

Hello,
I am trying to use drag and drop on my system but it is not working. other's within my department have no issues, but they are using IE10. I also have SharePoint Designer 2013 installed.
Any suggestions?
Thanks,
Derek

Derek,IE11 is having some compatibility issues with the share point.Apart from IE11,it should work on IE10,9 and Firefox and chrome as well.
Please check the links below that explains the issues with IE11 and the functionality of Drag and drop and limitations as-well.
1.Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance.
2. Open the same document library in Internet Explorer as this functions does not work with Firefox or Chrome by default
3. Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
http://expertsharepoint.blogspot.de/2013/12/sharepoint-server-2013-drag-and-drop.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Database Mail not working with SQL Server Agent

I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind Regards

The problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help

PSE13 trial version and it will not work with Windows 7

I have downloaded PSE13 trial version and it will not work with Windows 7

I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Application is not working with mouse

Dear All,
We have a strange issue in the our application (Oracle form) in the one of our client machine.
Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
Our Applications server is in Other country and client are accessing from India.
This occurs for some user and not for all.
Application server Version 10.1.2.0.2.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Java Plug-in version 1.6.0_31 .
Please any info will help us lot.

Thank you for the quick replies Michael Ferrante and HamidHelal.
But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
Even the java control panel is not working with mouse.
For other country customers everything working fine.
So its difficult for me to apply the patch with these uncertainties.
Checking with fresh java installation and let you know the status.
Thanks.

Voice Memo is not working with iOS 8.2

Voice Memo Records is not working with iOS 8.2. how to fix it?

Voice Memo Records is not working with iOS 8.2. how to fix it?

On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screen

http://support.apple.com/kb/HT1808

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

KeepAlive not working with WL 6.1 SP1 in a Sun box.

Similar Messages

Maybe you are looking for