Keeping a logo inline with the end of a text layer

How do I anchor or parent another layer to the end of a text box? For example, I want have a logo at the end of a text layer saying "Weeknights" and have the position of the logo automatically adjust when I change the text to something shorter or longer such as "Tonight" (I cannot right justify the text as I need to have the front of it line up with something else)

Since you say NOTHING about air times, this gets pretty easy:
Weeknights
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Tomorrow
Tonight
What is that, nine variations? That's ALL?
And you want a fancy expression for it? How long can it take to make all nine: an hour if you're drunk, sleep-deprived and crippled, perhaps?
I think you're looking for a complicated solution where none is necessary.

Similar Messages

After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Pick a particular file and keep on target side with the same file name

Hi Guys,
I have got couple of files in a folder. I need to pick only two files, I have setup BPM procedure 2 payloads merge. To keep these merged file with the same source filename.
Source side file Directory
abc_12345_20100408101029.xml (abc_seq number_timestamp.xml)
xxx12345.xml
test.xml
abc_12345_20100408101149.xml
Target Side, How do I keep with the same file name?
abc_12345_20100408111239.xml --- same file name with diffrent timestamp.
One more question: How to setup a file adapter to trigger between 2:00am to 5:00 am? in a particular time
Does anybody has got quick idea, any links etc.,
Your quick and positive response will be much appreciates.
Kind Regards
San

Hi,
One more question: How to setup a file adapter to trigger between 2:00am to 5:00 am? in a particular time
For this you can Availability time planning (i.e you can schedule the file adapter to poll for the files with in the time interval i.e 2 -5)...
for generating the file name at target side you need to look for the Dynamic Configuration as you need to change the timestamp for the file..and i am not sure how this works in BPM..
in normal scenarios dynamic configuration will help....
HTH
Rajesh

HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well. What settings can I change to

I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this?

A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this? does anyone else have this problem with the iphone 4s?

What do you mean "with the ends cut off"?
You swipe the screen upwards starting on this icon to open the camera app.

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

My ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

my ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
please help! i am at a loss here.
thank you, movie lady
ibook g4

The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

I try to login to Creative cloud, but it just keep on "loging in" with the loading circle, it never stops.. please help

I try to login to Creative cloud, but it just keep on "loging in" with the loading circle, it never stops.. please help
i have tried to reinstall it, disabled the UAD or what its called.. i dont know what to do with it to be honest

Mac Spinning Wheel https://forums.adobe.com/message/5470608
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

My cellular data keeps on switching off,with the message no simcard?

my cellula data keeps on switching off,with the message no simcard.

The "fix" is to get the phone repaired. There's no magic solution for a broken phone.
Bring your phone ant $149 to Apple for an out of warranty replacement, or find a 3rd party repair shop near you.

I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
The 5th Gen keeps on losing connection with the main router and thus with the internet.
Any ideas why?

Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

To download the GL 140881 with the colums VENDOR CODE & TEXT in FBL3N

Hello Exports
My user trying to download the GL 140881 with the colums VENDOR CODE & TEXT in FBL3N
In the columm of Vendor code and Text he wants to Display in the respective filed
before that he has done transaction IN MIRO
The Entry is
PK Account    Account short text         Tx Cost Ctr   Order                  Amount
31 35774      FRICTION ENGINEERS   4I                                        30.375,00
86 310891     GR-IR clear-RM/Comp    4I                                       13.500,00
86 310891     GR-IR clear-RM/Comp    4I                                       13.500,00
40 140881     VAT RECOVERABLE    4I                                       1.687,50
40 140881     VAT RECOVERABLE    4I                                        1.687,50
in this he wants disply VENDOR CODE & TEXT in FBL3N for 140881 G/L A/C (VAT RECOVERABLE    )
But i tryed it by table wise like BSEG and LIFNR but its displys only filed name but it not displaying the VENDOR CODE & TEXT in the respective filed
Can you please give suggesstion on the same
Thanks and Regards
vamsi

Dear,
Check the following ink -
Re: Vendor & Customers in FBL3N
regards,
Gov

To download the GL 140881 with the colums VENDOR CODE & TEXT in FBL3N Pos

Hello Exports
My user trying to download the GL 140881 with the colums VENDOR CODE & TEXT in FBL3N
In the columm of Vendor code and Text he wants to Display in the respective filed
before that he has done transaction IN MIRO
The Entry is
PK Account Account short text Tx Cost Ctr Order Amount
31 35774 FRICTION ENGINEERS 4I 30.375,0086
310891 GR-IR clear-RM/Comp 4I 13.500,0086
310891 GR-IR clear-RM/Comp 4I 13.500,0040
140881 VAT RECOVERABLE 4I 1.687,5040
140881 VAT RECOVERABLE 4I 1.687,50
In this he wants disply VENDOR CODE & TEXT in FBL3N for 140881 G/L A/C (VAT RECOVERABLE )
But i tryed it by table wise like BSEG and LIFNR but its displys only filed name but it not displaying the VENDOR CODE & TEXT in the respective filed
Can you please give suggesstion on the same
Thanks and Regards
vamsi

yes i got a solution
Thanks for all
vamsi

Keep sizes in illustrator till the end of the work

Hi people! I started to learn to use illustrator and I am stuck in something that may be super easy. I want to create a file with an specific size but once I have finished my work, the size has changed and the file is enormous! Someone can help me to understand how to keep the size until the end? Thanks ;-)

Saisha,
They want a png file!
In that case, they will get a raster image, and a conversion from CMYK to RGB.
You may be able to talk them into a vector PDF file instead, but hey may have reasons, and you may (have to) give them what they want.
You should be able to do it, in a few different ways:
A) Set the Artboard/artwork to the desired size at 300 PPI and export it with 300 PPI in the options;
B) Set the Artboard/artwork to the desired size in pixels x pixels and Save for Web without changing anything;
C) Set the Artboard/artwork to whichever size you like and Save for Web and set the desired size in pixels x pixels in the Image Size window.
Remember to tick Art (or Type) Optimized (for Save for Web it is hidden away in the Image Size window).

Itunes 10.6.1.7 keeps crashing when syncing with the new Ipad

Glad to find this forum!
It's been a disappointing and frustrating week for me as I have tried to sync my new ipad with itunes 10.6.1.7. Itunes keeps crashing without reasons when syncing either apps, music or videos. Btw, I am using Windows XP SP3.
So far, I have not been able to play any videos because Itunes always crashes.
I have tried to re-install Itunes for more than 5 times [with fresh install] but the problem still occurs. I have also tried to downgrade to Itunes 10.5.3 as suggested in the other threads but Itunes still crashes. This only happens when syncing with the new Ipad.
I have an Ipod Nano which works great on both version of Itunes.
I am really disappointed because I can't watch movies and/or listen to music on my new ipad because it keeps crashing.
My wish is just simple. I just want to be able to watch movies and listen to my music on my new ipad. Sadly, this is not possible yet.
Can anyone help?

I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??

Keeping a logo inline with the end of a text layer

Similar Messages

Maybe you are looking for