Keeping brush selected with pen tool cs4

I like to use the pen tool with a selected brush, in previous versions was able to select a brush and
it would remain selected, but I can't find the a preference for that in cs4. any suggestions ?
thanks.

In the Appearance Panel Menu, uncheck "New Art Has Basic Appearance."

Similar Messages

  • Make selection with pen tool?

    In photoshop, you can create a path with the pen tool and then make that path a selection as if you'd used the lasso tool. How do you turn a pen path into a lasso selection in Flash (CS4)?
    Thanks,
    Keith

    Essentially, any path that you drawn in Flash, that you want to use to make a sub-selection of your artwork, has to be pasted onto your artwork layer and the "outside" portion deleted.
    Let's say you imported JPG into Flash of a house, and you wanted to remove the background. First, break it apart so that it's a fill. Then, it can help to draw your manually-drawn pen selection on a new layer above. Once you have traced the house/drawn your selection (making sure it's a closed selection) , copy the lines and paste that onto your layer of artwork. Click outside of the selection and delete the edges.
    One could also decide to fill the drawn selection lines, and use that as a mask for the artwork.
    Flash has fewer of the drawing tools than Photoshop or Illustrator. But even if this doesn't answer your question, there is a way to do what you want.

  • [bug report] Making selection with pen tool causes 'jittery' edge

    When I use the pen tool to create a path, and then make a selection from it and select inverse and delete the background, the result is a very un-even edge not the clean resullt you would expect, however if I make a mask from the same selection it looks fine.
    Steps to recreate
    1. Draw a simple path with the pen tool
    2. Make a selection from the path, with 0 feather and anti alias turned on
    3. Inverse selection (optional, same thing happens if you don't inverse)
    4. Delete the rest of the image
    5. The edge of the image now has an uneven, jittery edge
    compared to mask
    5. Undo the delete
    6. Go to Channel Pallette, and make a mask from the selection
    7. Edge of the mask should be clean like you would expect
    You can exaggerate the jittery effect by adding feather the the path selection

    Ok please Delete this I've sorted it. The blending mode had jumped to disolve.... but I 100% didn't change it to this myself, I wasn't even in the layer pallette at the time

  • How can I delete the area which I have selected with Pen Tool?

    Hi,
    I have selected the particular area of my background image, which is just complicated. Now, I would like to delete the selection so that I will copy something else in that blank area. How can I delete the selected area?
    Thanks.

    Hobotor wrote:
      Uhm you mean "rightclick---> make selection---> delete "?
    Hi,
    But I can't see such option. Please look below the snapshot:
    I want to remove the existing image (Girl's Image) and insert some other image. Please help.
    Thanks.

  • Problem with Pen Tool CS5

    Hi,
    I just got Photoshop CS5 and I'm having a bit of trouble with the pen tool - namely, I can't see the path I'm creating.  In CS3 I could clearly see the line between two points but in the new program the line is nearly invisible making it very difficult to create the path.  Is this a setting I can fix?
    thanks

    I was having 32 bit while I upgraded from CS3 to  CS4. The only problem with CS4 that time was with pen tool.Though I cannot precisely recall , I can say it t was very lazy and very frustrating and this was resolved totally after shifting to 64 bit.--If urs existing system is 32 bit try with 64 bit

  • Slow down when processing image clipping in photo shop with pen tool

    Adobe cs5 slow down when processing image clipping use with pen tool. The path is applying after few seconds when we draw on the image. My system supporting 4 GB memory with 64 bit.

    The main thing i use paths for in photoshop is extracting objects from photos.
    Other uses include stroking paths with the paint tools. For example, if you had
    a powerline to remove, one could trace the line with the pen tool and then stroke
    the path with spot healing brush set to content aware fill.
    more info on photoshop paths:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
    MTSTUNER

  • Problem creating vector mask with Pen Tool

    Using Photoshop CS5, Mac OS 10.6.8
    I'm trying to create a simple vector mask using the pen tool to create a curved line at the top and bottom of a photo. Here's what I'm doing:
    1. Create a new layer and select it.
    2. Select Pen tool.
    3. Choose "work path" by selecting button at top menu.
    4. I draw my shape with the pen tool.
    5. Now comes the problem... I can not select this shape, or assign it a color. When I create a clipping mask, it does not recognize my path. When I throw away the layer, the shape is still there in outline only. What am I missing here? I'm familiar with doing this in Illustrator, but I don't understand how it works in PSD.
    I need some help, please.
    Thanks.

    The main thing i use paths for in photoshop is extracting objects from photos.
    Other uses include stroking paths with the paint tools. For example, if you had
    a powerline to remove, one could trace the line with the pen tool and then stroke
    the path with spot healing brush set to content aware fill.
    more info on photoshop paths:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
    MTSTUNER

  • Problem with Pen Tool contrast...

    I noticed this the other day. When I'm using the pen tool in Photoshop CS4, it sometimes takes the color of what I'm using the pen tool on, ie; if I'm working with a picture with a bright green or pink, the path is bright green or pink (see link below) The picture isn't the worst that it does, but if I took a screenshot when it's at it's worst, you wouldn't see anything. I went through all the preferences and saw nothing. I do have the OpenGL acceleration turned on. Thanks for any input!!!
    http://www.flickr.com/photos/32892564@N06/3120591723/

    Thanks. That fixed it. I was able to select no fill in the pen tool bar (when pen tool is active), but could not select no fill when I clicked on the fill box in the regular tool bar (unless there is a trick) - all that comes up are color gradients to select.

  • The feature that i need most...do not activate paths with pen tool

    If you have to add one thing in illustrator...
    Make optional NOT to add new paths to an unselected anchor point with the pen tool.
    I never want to activate paths with the pen tool
    Arrow tool=select
    Pen tool= add new points
    If i want to add new segments to a path, i'd select it first a selection tool.
    To my knowledge, Illustrator is the only vector application that doesn't follow this convention
    In theory,activating the paths with the pen tool should speed the drawing: However when working with illustrations that combine open and closed paths, or if we want to start a new line from an anchor point,  we have to lock, unlock or put in layers in order to avoid to activate unselected paths:
    That's very slow and frustrating, specially when in other apps, you can create complex illustrations in just one layer and with no lock/unlock due a more precise control over the paths.
    I have mentioned this feature before, but every time i face a project with a mix of open and closed paths, is a major problem
    Please change this behaviour or at least, make it optional.

    Yes, it has to be removed in two places and someone who has the authority might take action upon my mentioning it again.
    Here is a link on syncing -  http://support.apple.com/kb/HT1386nHave a read. Someone who uses the Books tab often might give you a step by step guide. Meanwhile, you can email yourself a PDF to keep you going. If it is a one page PDF it will be shown as opened in the email on your iPad. Press on the centre of it to save it to ibooks.If it is more than one page it will be shown as an icon; press on it for the prompt where to open it and choose iBooks, or whatever. I use Goodreader as it has a superior file management system. It costs very little.
    Here is the  link fo the iPad User Guide should you not already have it. You can download it to iBooks - http://support.apple.com/manuals/#ipad
    Finaly, get more help by clicking on iPad Support at the top of the index page on this forum.

  • Overlap or hole in image with pen tool

    hi guys am pretty new to illustrator just got it because i need to make some t-shirts out of drawings
    so i have been busy with the pen tool and am just wondering how you for instance make a hole in youre path (sorry if its pourly explained dunno all the therms) for instance i uploaded a picture i want the hole in the R to be part of the it so if i use a 3d effect you see the shade and on the S i need the upper end to overlap and the one down underneath. hope you guys understand dont really know how to explain in english sorry :s
    thanks alot in advance cheers!

    CappuciniBaby,
    For the R you may select both paths (outer and inner) and Object>Compound Path>Make.
    For the S you may:
    1) Cut the path at the ends at either side of the central part, using the Scissors Tool on an Anchor Point on both sides of the fill,
    2) Move the newly formed end paths below and beneath the central part, this is done in the Layers palette/panel by dragging up/down;
    3) Group to keep the S together.

  • Fill shape drawn with pen tool

    There are three posts dealing with this issue and each time the person who posted the problem said they figured it out but did not say what they did.  Here is the problem:
    I draw a shape with the pen tool in Flash CS4.  I made sure the shape was closed.  But, I cannot fill the shape no matter what.  Paint bucket tool does not work.  Whatever I do, I get the red diagonal line on the fill color.  I can fill a shape with the rectangle or oval tools but not the pen tool.
    Please help.  Thanks.

    Thanks for your help.  I tried what you suggested but the union selection was grayed out.  I was in the drawing object mode.  But after fooling with it for a bit the following worked (I'm still not sure why):
    I double clicked on the object with the selection tool.
    I then selected a fill color in the property panel and it filled in.
    However, I cannot replicate this.  I tried drawing another shape with the pen tool and cannot fill it in.  I tried converting it to a symbol and that did not work either.  I must have done something to the original shape that allowed me to fill it in last time I fooled with it.

  • How to Extrude a path created with Pen Tool

    Hi All
    I have created a path with the pen tool (the brown part), and now I want to extrude it, but it extrudes the whole containing block (See image below)
    Now I have tried everything, from grouping to compound paths etc, but nothing works.
    How do I extrude my path?
    Thank you

    ...and Texturized it AFTER the extrusion....
    Applied a Grain Texture after the extrusion.
    For clarity:
    Always pay attention to the Appearance palette. The order of the items in the Appearance stack reflects the order in which they are applied.
    A so-called "live effect" (of which both 3D Effect and Grain Texturizer are examples) is an operation which is automatically re-applied after you make an edit to the object to which it is applied. The effects are applied in the order in which they appear in the Appearance stack, from top to bottom.
    1. Ellipse Tool: Draw an ellipse. Leave it selected.
    2. Apply 3D Effect.
    3. Apply Texturize Effect.
    Look at the Appearance palette. 3D Effect is listed above Texturizer, and the whole 3D rendering is texturized.
    4. Appearance palette: Drag 3D Effect to below Texurizer. The unwanted extrusion of the entire texture image appears.
    JET

  • Problem with pen tool, lines and blend tool

    I draw line 1.
    Then I break (click the arrow key and then click the pen tool again) and draw line 2
    When I finish there is a puzzling gap on line 1 after where line 2 intersects:
    Then when I use the blend too the resulting abstract looks like - non-continguous with broken lines:
    instead of something of a continuous wave and unbroken lines like:
    To me, the problem is clearly the gap show up but I don't understand why it is appearing, when as picture 2 shows, I clearly I'm drawing complete lines.

    Thanks. That fixed it. I was able to select no fill in the pen tool bar (when pen tool is active), but could not select no fill when I clicked on the fill box in the regular tool bar (unless there is a trick) - all that comes up are color gradients to select.

  • Anchor points with pen tool askew

    Hey everyone, I have been using illustrator for about 5 years now and this has never happened to me before. I use CS4 and i opened it today to trace a logo and out of nowhere, whenever i go to connect a point with the pen tool, it makes a point about a quarter of an inch in the opposite direction of where i clicked down. Usually I can make a point, then try to connect it with another and it goes exactly where i clicked down for point #2...now it's impossible to correctly trace anything since I have little control over the pen tool anymore.
    I read in another forum when researching this problem that in in View > snap to point may cause this but even after unselecting it, i still have the same problem. I also tried resetting Illustrator like I read may help and nothing. I can't find the presets folder on my computer I did the key combination while opening the program.
    Thank you for your time!
    -Melissa

    Melissa,
    It could be a preference corruption or a disturbance from other applications or something similar.
    To reset the former the former, you may try to Move the folder with Illy closed, or just press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (the latter is easier but changes your preference settings to defaults (spoiling any customized settings, and it may be necessary to perform the more thorough Move).
    To solve things in case of the latter, you may have a look at the relavnt items, including 7, in Other options.
    Or it could be something else.

  • Ctrl not working with Pen Tool - Can't move shapes or paths

    I have Windows 8 and Photoshop CS3. It works fine, but I accidentally must have messed something up earlier tonight, because holding down Ctrl (when using the pen tool) suddenly won't let me move shapes or paths. I work a lot with vector graphics and design so I've ALWAYS held down Ctrl after closing a path and then moved it around on the canvas. The cursor turns black when I do this. Now, it's white and tries to select nothing? If I click directly on the path, it just alters the handlebars. And the Move Tool tells me I can't select anything.
    This is what it looks like when I hold down Ctrl when using the pen tool and try to move my path. I cannot select it.
    Please help me, I have a project due and the only way I can move my paths or shapes now is by clicking ctrl+t and it's very annoying.
    Thanks in advance.

    What you describe is how it works with one of the Shape Tools selected in the toolbox.
    With the Pen Tool selected, one presses the Ctrl key, drags around the path to select all the points and then click and drag on one of the sides (not one of the points) to move the whole path.

Maybe you are looking for