Keeping Contact Groups up to date with the iPhone
I use my Address Book groups to organize my customers. The problem I'm having is this: when I'm out and about and I add a few new customer contacts on my iPhone they get lost in "All Contacts" when I sync to my computer. I know that you can not add them to groups while on the iPhone, but is there at least a way to identify the most recently added addresses in Address Book? The "Last Imported" category doesn't list them.
Bottleshock,
There is an option in the Info tab in iTunes to have contacts created on your iPhone put into a specific group when you sync them back to your computer. I have mine set up to go into an "iPhone" group, where I know all contacts in that group were created on the iPhone and have not yet been assigned to another group.
Hope this helps,
Jennifer B.
Similar Messages
-
Enable the extension to keep chrome bookmarks up to date with the safari bookmarks on your iphone
on my laptop icloud comes up and tells me i need to enable the extension to keep chrome bookmarks up to date with the safari bookmarks on your iphone! if someone could help me i would be grateful !!
Once you click "get new recovery key" all data on your sync account is erased forever. There is no way to get that back. If you have data on your iPhone you cannot move it from your iPhone to desktop Firefox. the iPhone sync is 1-way only. Unless you have a Firefox profile somewhere, you will ahve to manually rebuild your bookmarks.
-
hi , can any one help me with a problem ,,, i own an iphone 4 and creates my account in itunes months later my friend bought an ipod and created an account also but created in my pc and now both get sync in the same pc and all my personal data from the iphone 4 keeps getting copy and the ipod gets it and have acces to my personal data and apps gets my mail etc , can any one help me with this issue?
thnk youSorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis. -
I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts). I dont know how to repair this. what a nightmare
An icloud account is designed to be used by just one user. If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.
-
Why the ISTORE of Malta is not up to date with the latest movies and series like the UK & USA and why old movies are being uploaded .
I believe the apple should be universal in all the products and a small island like Malts should have the same products for sale on ISTORE like of the UK and USA.The iTunes and App stores are inherently different in different countries. Local laws on copyright and other limits on the distribution of intellectual property make it impossible for Apple to simply put everything in every store. Sometimes, the owner of the intellectual property does not allow it to be distributed everywhere. Keep in mind that Apple does not own the music, books, movies and such that they allow for sale in their store front, so they do not necessarily have any say in what may, or may not appear in what store.
-
how do I sync my iPhone 5 to a new Toshiba laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.
I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.
-
How to display data with the same text and key in the drop down list?
Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST,
c(20) type c.
* c = 'select any'.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data:begin of jtab occurs 0,
kunnr like kna1-kunnr,
land1 like kna1-land1,
end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'. "---> Data for key is the same with text
VALUE-TEXT = 'Name'. "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AMshawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
> LIST TYPE VRM_VALUES,
> VALUE LIKE LINE OF LIST,
> c(20) type c.
>
> * c = 'select any'.
>
> data:begin of itab occurs 0,
> kunnr like kna1-kunnr,
> name1 like kna1-name1,
> end of itab.
>
> data:begin of jtab occurs 0,
> kunnr like kna1-kunnr,
> land1 like kna1-land1,
> end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
> default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'. "---> Data for key is the same with text
> VALUE-TEXT = 'Name'. "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh. -
I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?
I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).
-
I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?
Ok I have a question.
Why do you want to use Beta software? Especially since you are having this problem with it?
Uninstall it and forget about it until it is released as a real piece of software. -
hi there
if i associate my apple id with another email will i lose my icloud data or i will still be able to access all my stored data with the new linked to my apple id email address?
i mean i am not signing up for a new account, just changing my old id primary email which is my apple id login into account.
in other words, www.icloud.com will recognize that it is still me if i login on the site? will i be able to see there all my stored information?
and if i change my password, does it automatically changes the @icloud.com password which should be the same as my apple id pass?
thanksAfter opening the email it shoud of had you enter the Apple ID and password. Using certian web browser's can cause errors. You can adjust securty settings (big pain) or you use another browser. Using Firefox or Safari should do the trick.
Let me know if using Firefox or Safari resolved it. -
How to get the exact day date with the another date field?
Hi,
Please help me how to get the specific day of the week's date with the help of another date field.
Actually , one field(week_day) has 1,2,3,4,5,6,7 here 1--MON,2-- TUE like that.
another field has the date. based on that date, we have to go to that particular week and need to pick up the date by the above week_day. It should be in that week itself.
Thanks in advance!!
Regards,
Vissu...
Edited by: vissu on Oct 29, 2010 3:07 AMHi,
Something like this
SELECT TRUNC(<DATE_COLUMN>,'DAY')+<WEEK_NO_COLUMN> FROM <YOUR_TABLE>;for the particular week of the date
SELECT TRUNC(SYSDATE,'DAY')+<WEEK_NO_COLUMN> FROM <YOUR_TABLE>;for the current week
cheers
VT -
Wish to keep always 2 years of data on the cube
Hi Experts,
we wish to keep always 2 years of data on the cube and archive the data after it is 2 years old.
Any thought on this is appreciated.
Thanks,
Varun.hi Varun,
you can use tcode SARA and 0calyear as selection to archive the cube to flat file or another cube,
for more detail please follow this how to archive in bw doc
https://websmp108.sap-ag.de/~sapdownload/011000358700000085572002E/HowToArchiveinBW.doc
hope this helps. -
hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim card it says that simcard not recognized. I tried all the solutions in the net but nothing seemed to work. What should I do? I'm located here in the Philippines. I hope you could help. Thanks!
I know. I was with my brother when we did this. He didnt clearly understood the question that poped-up. Regarding the simcard, after successfully restoring it on itunes my simcard won't work. I'm not able to send and receive calls and messages.
hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c -
HT4623 Why will my Iphone 4 not connect to internet on wifi nor data with the ios 6.1 update?
Why will my iphone 4 not connect to the internet on wifi nor data with the ios 6.1 operating system?
Settings > General > Reset > Reset Network Settings
Maybe you are looking for
-
How to insert data into the mysql table by giving as a text file
Hi, Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP. Thanks:)
-
Posso espelhar meu Macbook Air no Apple TV?
Can I mirroring my Macbook Air in to a Apple TV? Posso espelhar meu Macbook Air no Apple TV?
-
Remove specific row and column from 2d array
Hi, I would like to know how to remove the specific row and column from 2d array. for example, I have the original 4x4 array as below 2 -1 -1 0 -1 2 0 -1 -1 -1 2 0 -1 -1 -1 3 let say that i want to remove row 2(bold) and column 2(bold), and the new 2
-
White screen with apple logo and rotating cog
Is this a sign that my 27inch imac is overheating. Do I have enough ventilation around it? how much space should I have around the outside of my mac?
-
Font looks corrupted with other language letters.
Hi, I've had this problem for a while now, and I can't fix it no matter what I try... I use 4 types of keyboard layouts: Armenian - Western QWERTY, U.S., Canadian French - CSA, Turkish - QWERTY. On French or Turkish websites, extended latin character