Keeping data in disk mode and playing in music mode

How to you keep your data put in disk mode and change to music listening mode and NOT losing your data?

Thanks sooo much. I know this seemed so simple but I could not find this answer anywhere after looking for hrs. in manuals and discussions. As you can imagine, I did not want to loose 75GB of data. Thanks again! Bridget (BBXO)

Similar Messages

  • How to keep data in sleep mode

    Dear All
    Any one guide me, " How to keep data in sleep Mode". My data will be in database but it will not active when Oracle server start up.
    i am using oracle 10g r10.2.1 with window server 2003.
    Hope full response will be appreciated.
    Regards,

    some one New wrote:
    Dear All
    Any one guide me, " How to keep data in sleep Mode". My data will be in database but it will not active when Oracle server start up.
    i am using oracle 10g r10.2.1 with window server 2003.
    Hope full response will be appreciated.
    Regards,That's a very new term and AFAIK, there is no such term within Oracle. The data doesn't need to be active or inactive. Its just there when the database comes up and as long as you don't access it, it just stays there. What you can do is either to make the tablespace offline so that the data is not accessible at all or make it read only so that its not modifiable at all.
    But still, as Pierre asked, you may want to tell us exactly what you want to do.
    Aman....

  • After yesterday's "upgrade", iTunes can no longer find and play my music library.  It points to the correct location in "Advanced", but clearly iTunes is not actually seeing it.

    After yesterday's "update", iTunes can no longer find and play my music library.  It points to the correct location in "Advanced", but clearly iTunes is not actually seeing it.  What gives?  And why does Apple force these constant updates that just screw up everything?  It was all working fine yesterday before I ran the update.

    Does anyone know where I can get support for this issue?

  • This an IPOD I bought used.  Everything else works fine.  It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine.  Any ideas?

    This an IPOD I bought used.  Everything else works fine.  It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects.  Any ideas?

    Then my last suggestion is to Reset it, while connected to the BMW Audio.
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    I am experiencing the same problem, not being able to access internet at the same time as streaming iTunes music through an Airport Express.
    Our configuration consists ot; an iMac G5 and an AirPort Express connected to a cable modem.
    This problem first occurred using iTunes 7.0, now updated to iTunes 7.0.1, along with OS X 10.4.8
    I have followed the Apple troubleshooting guide - without success to this point. The internet can be accessed (although slower than usual). However when the AX is set, using the AirPort Admin Utility to provide an AX provided IP address to the computer, the internet disappears, but iTunes can play over the network via the AX station.
    I am suspecting a damaged preference file, or something of that nature, but am not sure what file(s) to be searching for.
    Any help here would be appreciated.
    thanx

  • IPod says to use iTunes to restore but keeps going into disk mode.

    So whenever I reset my iPod, a screen pops up that says to use iTunes to restore it but when I plug the iPod into the computer, it goes into disk mode and iTunes doesn't read it.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • Zen Xtra - disk reading and play

    Quick question..... just wondering.....
    I have the 60GB version of the Zen Xtra.
    When the player is playing back a track, is it reading directly from the HDD and playing it on "the fly"; or is it like CD/MP3 players that have anti-skip protection where the data is being read 30 or 45 seconds into the future?
    Curious?
    -Stripe
    NOMAD II MG
    60 GB ZenXtra 66% full

    The player doesn't have any specific skip protection for reasons outlined here in the Zen FAQ at Nomadness.net.
    The player *does* cache data but this is for battery life reasons, and of course dependent on the type of track.

  • How can I safely transfer my 125GB of itunes music files to free up space, but still keep itunes on my MBP, and access the music with the cloud and match?

    I have already backed up all the itunes files on two different external drives. And I have already set up icloud and itunes match. I am still paranoid about deleting the files from my MBP, but I need to free the space. What steps should I take to delete the files. And can I still keep itunes (w/o all the music files) on my laptop and access the music from the cloud? I know I can run them with the external drive plugged in, but looking for a way to do it w/o pluggin in.

    I have tried that as well.  The purchased songs are not in my playlists and they are still there.  I manually deleted them on the phone but the sync puts them right back on there.
    I only sync playlists and they aren't on there. 

  • TS1717 I updated my itunes and now I can't get it to open and play my music. ? Any thoughts as to what I can do

    I updated my ITUNES and now I can't get it to play my music. After the song that was playing during update played nothing else will. What can I do

    Se my response on this post:
    ]                                  Screen Message"File iTines Library.itl cannot be read because it was created by a newer version of iTunes" What is this and how can it be fixed?                    
    They do not appearon the right-had side of your post.

  • Rhythmbox problem and can't grab and play any music

    Hi,
    I just installed rhythmbox, and after I run on terminal, it generate some error like below :
    (rhythmbox:904): Rhythmbox-WARNING **: Unable to grab media player keys: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SettingsDaemon was not provided by any .service files
    I used LXDE and here is my daemons rc.conf :
    I put avahi-daemon as suggested on wiki arch
    DAEMONS=(hwclock dbus syslog-ng networkmanager netfs crond @alsa slim avahi-daemon)
    Thanks

    Reki wrote:
    I remember not being able to play any music in Rhythmbox as well. If I could remember correctly I installed these packages:
    sudo pacman -S gstreamer0.10-ffmpeg gstreamer0.10-ugly-plugins
    Thanks for your reply..
    now rhythmbox can play music.. but if I run from lxterminal, it still show some error message like below :
    (rhythmbox:903): Rhythmbox-WARNING **: Unable to grab media player keys: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface `org.gnome.SettingsDaemon.MediaKeys' on object at path /org/gnome/SettingsDaemon/MediaKeys
    (rhythmbox:903): libnotify-WARNING **: Failed to connect to proxy
    (rhythmbox:903): Rhythmbox-WARNING **: Failed to send notification (終わらない世界 2009): GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files
    (rhythmbox:903): RhythmDB-CRITICAL **: rhythmdb_entry_unref: assertion `entry != NULL' failed
    (rhythmbox:903): Rhythmbox-WARNING **: Unable to release media player keys: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface `org.gnome.SettingsDaemon.MediaKeys' on object at path /org/gnome/SettingsDaemon/MediaKeys
    Can I ignore that error ?
    Note : 終わらない世界 2009 <== song that I test to play

  • How do I get my iPhone4 to recognise and play my music in iTunes?

    Hi,
    I have a new iPhone4 and an old iTunes account.  Even though I can sync with iTunes (and see my music in iTunes), I can't see any albums or any music on the phone - it tells me that I have 'no content').
    What can I do?
    Many thanks,

    I should also mention that you can automatically download purchases made on other devices by enabling automatic updates:
    iOS Device: Settings > iTunes & App Stores >Automatic Downloads
    Computer: iTunes > Preferences > iTunes Store > Automatic Downloads

  • ITunes keeps on opening by itself and playing music!

    On my MacBook Air, iTunes randomly opens and begins playing music.  No matter what I do, it keeps doing this.  I have tried pausing the music (it just keeps playing a few seconds later), closing iTunes (it just opens back up).  It is really annoying and frustrating.  I have only had my MacBook for a year now......and it just started playing Phantom of the Opera, The Point of No Return....now I'm scared.

    Hi sailormoonfreax,
    Welcome to the Support Communities!
    Are you closing the iTunes window, (clicking on the red dot), or are you actually quitting the application?
    I would suggest force quitting the application, and then removing it from your Login items for your User account.
    Another scenario that could be happening is a setting in Mountain Lion that reopens previously opened windows when you shut down or restart.
    The articles below will explain these settings in more detail:
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/HT3411
    Mac Basics: Set your preferences
    http://support.apple.com/kb/ht2490
    System Preferences controls system-wide settings ("global" settings), and is available from the Apple menu at the upper-left corner of the screen.
    Click the General setting and you can choose whether or not windows re-open.
    Click the Users and Groups setting to adjust your login items.
    OS X Mountain Lion: Set up login options
    http://support.apple.com/kb/PH10650
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • How can I keep data costs low? And what is Data Roaming?

    Having trouble staying within data limits and having to pay a fee any suggestions for how to avoid this??? Also, does Data Roaming affect anything?

    Well data roaming can seriously affect your bank balance!  It is what you use when wanting to use data services abroad and can be very, VERY expensive, depending on where you're from and where you are.  Best to keep it switched off when abroad apart from when you definitely want to use it, and use wi-fi as much as possible.
    If you are generally struggling to say within your data limit, then maybe it is not enough - how much is it?  Avoid downloading music, podcasts, apps and app updates on cellular data - stick to wi-fi for that.  But it may be that you need to up the data amount in your plan, and altering the plan may be cheaper than paying every month to top up.

  • After I installed iOS7.7 on my iphone 4, it only works when plugged in, overheats and plays random music. HELP!!!

    My iphone 4 has been acting up since I installed iOS7.1. It only works while it's plugged in, overheats while charging and randomly plays music.HELP!!!

    Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
    http://support.apple.com/kb/HT1808

  • Enable disk use and Manually manage music and videos

    When I go to Summary, Enable disk use is checked but dim, so I can't change it. Manually manage music and videos is checked and not dim. Is this enough to do so that I can manage the videos I have shot on my Nano from iTunes, or do I have to do it from iPhoto?

    Hello JohnKerr48,
    I can manage the videos I have shot on my Nano from iTunes, or do I have to do it from iPhoto?
    You have to manage them via a Finder window, through iMovie, or iPhoto. They cannot be managed via iTunes unless you copy them from your Nano onto your Mac and then import them into your iTunes library. For more information, see this Apple support document.
    http://support.apple.com/kb/HT3822
    B-rock

Maybe you are looking for

  • How to configure onboard Front Audio Pin ?

    Dear Sir, I just have problem with front audio pin connector. My motherboard is MSI 915G Combo. In the manual it's describe as follows.. 1.  PORT 1L 2.  GND 3.  PORT 1R 4.  PRESENCE# 5.  PORT 2R 6.  SENSE1_RETIRN 7.  SENSE_SEND 8.  KEY 9.  PORT 2L 10

  • How to Install Latest SB Live Drivers Onto New Install of

    I upgraded to a new motherboard and CPU and have just installed a fresh new copy of Windows XP on the machine. I haven't plugged it in yet, but I will be installing a SB Li've Value CT4830. In preparation for installing this card, I tried to download

  • BB Z10 Blank Screen...

     Few days ago,i did realise that i be able to upgrade my OS to 10.2.0.415 ...as usual as i did for previous update,after all process have been finished,it will require me to re-start the phone so that the updates will be apply...but,once i click rest

  • How to get current statement?

    I have scheduled a job by "dbms_job.submit". The job is running, I check it by "select * from dba_jobs_running" and "select * from v$session". Can I find current statement of the running job? Because of v$session.sql_hash_value = 0, joining of tables

  • How do i reinstall software for the superdrive without a disk

    Hi, I am trying to utilize my external superdrive and it says hardware or software isn't recognized.  I cannot find my reinstall disk so is there one I can download from the Apple site? Which one? Thank you!