Keeping lines together doesn't work properly

If I use the keeping lines together option, Indesign frequently breaks paragraphs at unnecessary spots. E.g. I checked that it should keep two lines together at the end of every paragraph, but sometimes it starts the last two lines of a paragraph in a new page even when those two lines would fit at the previous page without any problem, sometimes it even breaks a paragraph at the middle of the page and leaves a half page empty. I really can't figure out what can be the problem, does anybody have an idea?

Have you checked for objects that are text-wrapping, perhaps unnecessarily?
Have you looked closely at the text to see if it has doubled returns between paragraphs?
Have you checked to see if other subheading styles near the text are set to a Keep With x number of lines afterwards?

Similar Messages

ITunes genius mix doesn't work properly

Hi everybody,
On my late 2006 iMac with iTunes10 Genius Mix doesn't work properly.
After having activated Genius iTunes generates a number of mixes with different music styles.
When I scroll over the squares the play sign shows up, but only work for 1 of the 9 mixes when I click the play sign.
Clicking on the other play signs in the other squares does not do anything.
Does anybody know what is wrong here?
Thanks!
PT

I now know what is causing the problem, at least for the singer in question, but I don't know how to overcome it. I now know that the problem started when I downloaded an MP3 album from Amazon. This album contains 25 songs sung by 25 singers, INCLUDING Annette Hanshaw,THE SINGER I'M INTERESTED IN AT THE MOMENT. So, when I do an iTunes' search for Annette Hanshaw, I get her, but I also get all the other singers on this album. This puzzles me. I've downloaded many entire albums, but I've never run into the unwanted linkages before. In other words, I want to keep all of the songs in the album I just downloded, but I only want Annette Hanshaw when I put her name in the SEARCH bar. Is there a way to do this?
Are all the songs in all Amazon MP3 albums linked together in this way?

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

The cable doesn't work properly when connected as data cable.

Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
Farhan

Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

Firefox from version 3.6 to 11 beta doesn't work properly with gmail

Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Interleaving doesn't work properly for Cisco 3725 router, IP Plus IOS

Dear All,
I am deploying VoIP between 2 sites using Cisco 3725 routers. Currently, interleaving doesn't work properly which result in voice quality problem only during data trafic. Issuing "show int multilink 1" command, I realise that there is no interleaves even though VoIP call and data are traversing on the link.
Attached here is the info for your reference.
Any idea, please help.
Thanks in advance.
Duc

Here is the info:
VNHCMR01#sh call active voice brief
: hs. + pid:
dur hh:mm:ss tx:/ rx:/
IP : rtt:ms pl:/ms lost://
delay://ms
MODEMPASS buf:/ loss /
last s dur:/s
FR [int dlci cid] vad: dtmf: seq:
(payload size)
ATM [int vpi/vci cid] vad: dtmf: seq:
(payload size)
Tele : tx://ms noise: acom: i/o:/ dBm
MODEMRELAY info:// xid:/ total://
speeds(bps): local / remote /
Proxy :,,,,, endpt: /
bw: / codec: /
tx: /,/,/
rx: /,/,/
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
12FF : 5798794hs.1 +202 pid:80 Answer 710 active
dur 00:01:14 tx:3721/74420 rx:3721/74420
Tele 0/0:15:424: tx:74420/74420/0ms g729r8 noise:0 acom:24 i/0:-50/-29 dBm
12FF : 5798794hs.2 +202 pid:81 Originate 81555 active
dur 00:01:14 tx:3721/74420 rx:3721/74420
IP 159.12.56.1:19526 rtt:30ms pl:73890/40ms lost:0/1/6 delay:67/67/107ms g729r8
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
VNHCMR01#sh int mu1
Multilink1 is up, line protocol is up
Hardware is multilink group interface
Description:
Interface is unnumbered. Using address of FastEthernet0/0 (159.12.55.2)
Backup interface Dialer1, failure delay 30 sec, secondary disable delay 30 sec,
kickin load not set, kickout load not set
MTU 1500 bytes, BW 256 Kbit, DLY 100000 usec,
reliability 255/255, txload 33/255, rxload 13/255
Encapsulation PPP, LCP Open, multilink Open
Open: CDPCP, IPCP, loopback not set
DTR is pulsed for 2 seconds on reset
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters 00:00:50
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0/0 (size/max total/threshold/drops/interleaves)
Conversations 0/5/64 (active/max active/max total)
Reserved Conversations 1/1 (allocated/max allocated)
Available Bandwidth 56 kilobits/sec
5 minute input rate 14000 bits/sec, 69 packets/sec
5 minute output rate 34000 bits/sec, 72 packets/sec
3062 packets input, 100509 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3078 packets output, 298192 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
VNHCMR01#sh ppp multilink
Multilink2, bundle name is VNHANR01
Bundle up for 02:47:34, 3/255 load
Receive buffer limit 12192 bytes, frag timeout 1000 ms
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x145A1 received sequence, 0x21A41 sent sequence
Member links: 1 active, 0 inactive (max not set, min not set)
Se0/2, since 02:47:32, 320 weight, 312 frag size
Multilink1, bundle name is VNBHCR01
Bundle up for 16:07:32, 35/255 load
Receive buffer limit 12192 bytes, frag timeout 1000 ms
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x2DB8D received sequence, 0x536BD sent sequence
Member links: 1 active, 0 inactive (max not set, min not set)
Se0/1, since 16:07:30, 320 weight, 312 frag size
VNHCMR01#sh run int multilink 1
Building configuration...
Current configuration : 380 bytes
interface Multilink1
description
bandwidth 256
ip unnumbered FastEthernet0/0
service-policy output llq
backup delay 30 30
backup interface Dialer1
ip tcp header-compression iphc-format
no ip mroute-cache
ppp multilink
ppp multilink fragment delay 10
ppp multilink interleave
ppp multilink group 1
ip rtp header-compression iphc-format
end
VNHCMR01#show policy-map
Policy Map llq
Class voip-rtp
Strict Priority
Bandwidth 50 (%)
Class voip-sig
Bandwidth 8 (kbps) Max Threshold 64 (packets)
VNHCMR01#show class-map
Class Map match-any class-default (id 0)
Match any
Class Map match-any voip-sig (id 1)
Match access-group name VoIP-SIG
Class Map match-any voip-rtp (id 2)
Match ip rtp 16384 16383
VNHCMR01#

Iphone4 doesn´t work properly in 3G mode

My iphone4 doesn´t work properly in 3G mode. Telefon calls break and telefone quality is poor. Internet is mostly not posssible. With 2G both (Telefone, Internet) work. The problem is not that vodafone net is poor because other smartphones work properly at the same location. Telefone calls often break with "no connection" even with 5 sticks. Internet speed is mostly poor, i.E, slower than 2G. It is definitly not a net problem. I think (not sure) the problems occures wit IOs 4.3.3

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Satellite P500-127: microphone or sound doesn't work properly using skype

Hi Toshiba team,
Recently bought a new notebook.
However the microphone or sound driver (connexant pebble high definition ) doesn't work properly when using skype. Also read about this matter in various forums such as the skype forum.
People encountered similar problems such as:
We can usually talk for a bit longer than 20 seconds, however the call will drop at a random time between 1 and 15 minutes. The strange part is that sometimes the quality of the call is good, but more than often my friend can only hear *half of what I am saying* while I usually do not have a problem hearing what has been said. The video will work so my friend can see me talking but can simply not really hear what I am saying.
Before the drop the call will usually freeze for a couple of seconds and then skype sometimes crashes. We have tried talking together without the video, however the problem remains.
I also found a suggestion by the toshiba service, just to simply increase the volume under control panel etc, but it doesn't work either..
Can you please help me on this one?
Cannot use skype at all as it just to annoying for everyone I talk to.. Quality is just to poor!!
Many many thanks
+Message was edited: link has been removed - not allowed+

Hi
Every day I use Skype with the internal webcam, microphone and speakers but I didnt have any problems as yet.
In your case I would try updating the drivers. Therefore download the latest sound and webcam driver (microphone is a part of webcam). Both you can get here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If your friend cant hear you, check also the settings for internal microphone. I have activated microphone boost in Windows sound settings so I could improve the microphone quality.
By the way: Do you use the latest version of Skype? With older Skype version I had also some problems on Windows 7. As far as I know only newest version is fully Windows 7 compatible.

My Safari doesn't work properly after installing Lion. Don't like it, how can I uninstall? (Cloud not worth it)?

I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

HT1923 The sync function on my iPod Touch 3rd generation doesn't work properly. My OS is up to date, but some of my podcasts won't transfer onto the iPod, and it won't delete ones I've already listened to.

The sync function on my 3rd gen iPod Touch doesn't work properly. It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Hp laserjet P1006 doesn't work properly

my Hp laserjet P1006 doesn't work properly on my windows 7(64-bit) and whenever I try to print a page the orange light just flashes and then the green light flashes and then it doesn't print at all.I've tryed everyway including reinstalling the software or even turning it off and then turning it on.Pleaseeeee.............help!!!!!!!!!!!

Hello
I understand you are no longer able to print with the P1006 on Win8.1.
Did you uninstall the P1006 first?
If not uninstall and reinstall the printer software again.
Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lightroom 5: start button in the presentation module doesn't work properly

Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
Regards Eugene

start button in the presentation mudule
Can you clarify?
There is no start button nor a presentation module.
Do you mean the Play button in the Slideshow module?
Which operating system?

Keeping lines together doesn't work properly

Similar Messages

Maybe you are looking for