Keeping old battery in pismo or new battery when on the ac adapter?

I have a pismo that has a fairly new battery in it. Most of the time, I have the pismo plugged into an AC adapter.
I still have the old battery that has a little bit of charge left in it. Therefore, my question is this:
Should I leave the new battery in the pismo with the machine plugged into the wall? Or, should I charge the new battery until it is full and then take it out of the pismo and store it somewhere and put the old battery in the pismo while I have it connected to the AC adapter?
thanks in advance for any answers

First of all, the charge circuitry will never overcharge the battery no matter how long you keep your PowerBook's AC adapter plugged in.
Nevertheless frequent recharging of the battery will reduce its life. If this happens a lot on your machine (which can be told by the battery icon in the menu bar showing a lightning bolt instead of a plug) then swapping in the old battery while working on AC power for prolonged periods may help.
However, more recent batteries and/or power managers are a bit smarter. When running on AC power, they wait for the battery charge to drop to 95% and only then recharge to 100%. If yours works this way, then you don't need to worry about it too much.
It is much more important for any lithium ion battery to be 'trained' (i.e. discharged from 100% to 0% and then recharged back to 100%) about once a month in order to retain its health. See Apple's [battery page|http://www.apple.com/batteries>.

Similar Messages

  • I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

    I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

    It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
    You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
    He also has some info on this problem. eg C13.

  • After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

    After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.

  • How can I transfer the music in my old Ipod classic to a new Ipod, not only the Itunes purchases?

    How can I transfer the music in my old Ipod classic to a new Ipod (not only the Itunes purchases)?

    You'll need to copy the music from the old iPod back to iTunes first before you can transfer it to your new iPod. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I lost my iPhone. If I wipe the device will I be able to restore my old iCloud backups to my new iPhone when I get it?

    I lost my iPhone. If I wipe the device will I be able to restore my old iCloud backups to my new iPhone when I get it?

    Yes.  It will only erase the phone, not any data or backups from icloud.com.  If you think it was stolen, you might want to read this: http://support.apple.com/kb/HT5668.

  • HT204053 How do I change my old Apple ID to my new Apple ID for the iCloud?

    How do I change my old Apple ID to my new Apple ID for the iCloud?

    Welcome to Apple Support Communities
    Open System Preferences > iCloud, and turn off each service individually if you don't want to lose contacts, calendars, notes and reminders. If you don't want to be kept, just select Sign Out.
    Then, you will be able to log in with a new Apple ID, so do it and follow the steps

  • How does one transfer only 1 of 4 backups from an old TIme Capsule to a new one, such that the 1 on the old TC can be deleted to save space?

    I have a 2-TB TC that currently backs up 4 Macs, which is full - no more space to backup, down to less than a year's worth of backup for one Mac, so I don't want any more old backups deleted.
    I bought a new 3-TB Time Capsule, and wish to move only one of the the 4 backups to it, which is currently over 1 TB. The idea is to free space on the old TC for the other 3 Mac backups. Also the two TCs may end up in 2 different locations soon.
    I read about how to do this at Apple and at pondini.
    Upshot was that I copied over the one sparsebundle using Finder drag/drop from the old to the new TC.
    When I go to Time Machine preferences to Select Disk, then click the new TC, and Use Disk, I get this dialog:
    I don't want to Use Both.
    I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
    How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
    Tom

    tomath2o wrote:
    I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
    I assume you selected the new Time Capsule?  If in doubt, and for future clarification, you might want to rename the Data folder on one or both TCs via Airport Utility.  Click it on the Disks panel to change the name; then that name will appear on the selection window, etc., so you'll always know which is which:
    In any event, the prompt means "Replace (the old) "Data" as the destination for this Mac's backups."  It will not touch either the new or old sparsebundle -- future backups will just be directed to the selected location(s).  Do note, however, that when you change destinations, the TM Prefs window will show "None" for oldest and latest backups.  Don't be alarmed -- that's just TM being lazy and not checking the actual backups yet. See #B3 in Time Machine - Troubleshooting.
    See Time Machine - Frequently Asked Question #34 for details on backing-up to multiple destinations.
    By the way, just for future reference, another option would have been to connect a USB drive to the existing TC (that's what "S.TM.Backups" is in the sample}.
    How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
    Click Replace "Data".  
    Message was edited by: Pondini

  • How do i transfer my itunes library onto my new computer, when on the old computer I have all the songs saved onto an external hard drive, which I still wish to use?

    At the moment on my old latop I have an external hard drive with all my songs on.  I need to attach the hard drive before the songs will play.  Any new songs are downloaded onto the external hard drive.
    How can I get the same set up on my new laptop?

    When I have held the shift key down & clicked on the iTunes library that was shown on the external hard drive, it has loaded most of the older albums, however there are several albums which have not appeared on iTunes on the new laptop, but if you go into explorer and look at the folders/files on the hard drive, they do appear on the external hard drive.
    I have also noticed my play lists and genres have not shown as they were on the old laptop.
    Is there any way of getting a complete copy of all songs, play lists, etc. so that is does not require to hold files in two difference places, I would prefer if all the files were on the external hard drive, so I do not fill the internal hard drive with songs?

  • HT1329 How can I get my old music library onto my new computer when my old laptop with all the library is broken?

    My old laptop had all my music library on it and I have no back up. I have gotten a new laptop (a PC not MAC) and really need my music onto my iphone, please help!!

    Depending on what the problem with the laptop is, you could take the hard drive out of the laptop and put it into an external hard drive caddy (laptops uasally use 2.5" drives). This should allow you to access all the files on the drive however if the hard drive is damaged you will have a harder time recovering the files.

  • HT1918 Apple has an old email address and my new email address. The first one which is charter cannot be deleted on the game center or icloud.  I want only my new att email address to be my Apple ID.  Why does Apple not correct all the areas with old emai

    How do I get rid of my old charter email address on the game center app and icloud.  It is messing things up when I go to sign in with my new Apple ID using Att? I am continually asked to update my password!!

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • HT4889 Is there a way to abort a transfer of data from an old MacBook Pro to a new one when you're using Wi-Fi?

    Is there a way to abort a transfer of data from an old MacBook to a new MacBook Pro when you're using Wi-Fi?

    If you are sure you want to to do it: command + option + esc, then and Force Quit.
    ethernet is much faster than wifi.

  • ITunes keeps old artist names that are incorrect, even after remaking the database

    I have a huge classical music collection. Using iTunes is a frustrating experience since the tags are quite useless. No one wants to search for
    this conductor with that orchestra
    as the artist. You want the composer!
    And then, in multiwork sets, iTunes tags a CD as
    Beethoven symphonies - Vol. 2
    rather than
    Beethoven: Symphonies Nos. 3, 4
    And, for example, I am reripping Dvorak's works. As I type in the Artist (composer), the first choice is
    Dvorak, Anton
    Then it lists the correct
    Dvorak, Antonin
    Where is it getting the incorrect name from?
    I once had Anton by accident, but I retagged all my files to make this correct. Now iTunes does not list Dvorak, Anton as an Artist, but it is still there when I retag.
    I deleted the .xml and .itl files in my music folder, and remade the database from scratch. They are still there.
    How do I fix this?

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'. Please be patient waiting for the return
              phone call. It will come in time depending on how heavily the servers are being hit.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • HT1420 I have two accounts one opened in 2009 with an old email account , and a new one when we purchased iphones in january, can i merge the accounts?

    can i merge two accounts

    Hey threeparrots,
    The following resource addresses your question:
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    Thanks,
    Matt M.

  • HT1848 I am not getting the option to deauthorise my computer and authorise a new computer when in the itune store.  dont  know what to do.

    Not getting the option to deauthorise my old computer which isnt here anymore and then authorise my new computer.  What do I try next?

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (94368)

  • Forms 10g rel.2: new behaviour when accessing the db and not logged on

    If I start a form and I'm not connected, then I have a problem with one of my standard-logon-routines.
    This behaviour is new in 10g rel.2 I think.
    If I start a function on the db and the form is not connected I get a FRM-92101 - There was a failure in the forms server during startup...
    This is a migrated form, which runs in 6i, 9i, 10g rel.1, but not in rel. 2.
    Who nows a workaround ?

    see my post in this thread:
    FRM-92101 when user tries to log on with invalid password

Maybe you are looking for

  • My iphoto library was opened remotely on a computer using a newer operating system. Now it won't open on mine!

    My iphoto library was opened remotely via sharing on a computer using a newer (10.7) operating system. Now it won't open on mine (10.6). It says it needs a newwer version of iphoto, and I want this computer to stay at 10.6 for compatability with othe

  • Exporting H.264 Blu-ray material in CS3

    System: 2009 Mac Pro 3.33GHz Quad core Snow Leopard 10.6.5 16GB RAM Radeon HD 5870 Adobe Premiere Pro CS3, 3.2.0 Video material: DVCProHD, 1080p60i/24p, 23.976fps shot on P2, MXF file format. Exporting to: H.264 Blu-ray via Adobe Media Encoder I can

  • Why is AI Continuous Scan.vi causing LabView 6.0 to run at such a slow rate?

    I am working on a 6 degree-of-freedom load application system.  It is forced controlled by pneumatic actuators operated using servovalves in a closed loop force controlled feedback system. The machine is instrumented with displacement (LVDTs and RVDT

  • I just got an iphone but I am going back to Philippines

    Right now I am here at the US, specifically, at San Jose California. I got an iphone while I am here at the US doing my training. When I finish my training I am going back to Philippines where I am working. Can I use the iphone even if I am in Philip

  • Installing PShop on New MBP

    Just received my new MacBook Pro yesterday. I need to install PhotoShop, etc. Here's the problem: My initial purchase of P-Shop is 5.5 (OS 9). Since then I have continually upgraded thru CS2. I cannot install from the upgrades and the MBP will not ac