Keeping the audio flow, but changing video scenes

Okay, so I did an interview of sorts. A friend sitting by a window. As he speaks, I want to fade out of one scene and into another, then another, and so on. the back to him.. then fad out into another scenes. but keep the audio in sink so when I go back to him... for some reason I cant seem to insert a new scene without disrupting the audio. Thanks.

Yes, what I gave you will work. Let me describe what these steps do in another way and see if you agree. The scenario, you have 20 minutes in one long clip of a person reading news just like watching TV. Five minutes in they read a story about Cuba, while the long clip continues, temporarily the view of the person reading is replaced by a map image though you still hear audio and when the map "cutaway" is over the 20 min. clip is just continuing unabated. There's no limit (I know of) to adding cutaways throughout the 20 minute video.
Note that you do have to have Advanced Options enabled to do this, Preferences>General: Show Advanced Tools

Similar Messages

Quicktime Movies - The audio plays but the video is completely messed up

Hi.
I have QuickTime V7.2 and my OS is XP.
All of a sudden QuickTime started playing back QuickTime movies with no video - there is just a lot of flickering green and purple - however the audio is there. Oddly, the files used to play fine. They were made on my PC as QuickTime movie files. The sound is there. (Additionally the files play ok in Realplayer.)
I've searched techy support but can't find an answer. Any ideas what is wrong?
I made the files on movie editing software called ULead, and as I said, they used to play fine.
Thanks very much.
Gary

A very similar and, I suspect, related problem. I created .mov files on my Mac, they play fine on the Mac, the audio plays but flickering video on my PC. I suspect it has something to do with the codecs used. Anyone have an idea as to how to make them compatible?

Can you keep the audio of one video clip but add another clip?

Can you keep the audio of one video clip but add another clip?
I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

There are several way to do this;
Replace with clip...
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

Hi, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio, everytime I delete the video, the audio is also deleted, please help!

Hi, Excuse my English, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio over the fade to black, everytime I delete the video, the audio is also deleted, please help!

I assume you are trying to end the clip/project with a fade to black, or something that just doesn't cut so instant.
One thing i'm thinking you can try is to Add a "Transition Clip" to the end, and try your first method. (with Detached Audio + Delete Selection. (Yellow highlight was deleted selection) Do you need something to end like this?
If you can, put screenshot up (Shift+Comm+4), if i'm not on the right idea. It seems like an easy fix, with a few ways of doing it. You can also add a blank image to end project, sub titles or Add,Cutaway fade +Opacity adjust.

How can I delete the video and keep the Audio in a few frames using Imovie 11

How can I delete the video and keep the Audio in a few frames using Imovie 11?

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

How do I remove the video and keep the audio in iMovie?

How do I keep the audio and delete the video? I've seen several answers saying to go to "advanced" but I don't see where that is. I went to preferences and checked show advanced setings but I still can't figure it out. Please help! (: By the way I'm on a MAc computer.

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

Want to replace video with photos keeping the audio

Hi there,
I have edited my video ...I'd like to put in photos, keeping the audio and replacing some of the video.
thanks for the help,
Liz (I'm using iMovie 3)

Hi Liz:
Welcome to discussions!
This is a relatively easy procedure-it's just more difficult to explain than do..;)
First-let me ask you a few things:
Are you using audio that was imported on the original video (recorded on the Dv tape)? If it is, you will need to extract the audio.
Are you importing audio from another source-like iTunes?
You will need to know the length of the video you are deleting and make sure the photos are the exact length if you are wanting exact replacement and audio sync.
In other words, if you already have the audio where you want it and just want to replace a small clip of video with the photo, you will have to replace the deleted video with the same length photo...and remember-transitions will affect the lengths as well.
Know you're saying "...what?" about now. Post again if I have lost you .
Sue

The record has stopped because the audio format has changed

I am using a JVC 9500E onto an XP pro machine with CS3 nothing else large empty hard drive. Firewire.
Bringing a recording which was taken in one go with no changes - at 48Khz. PAL nothing odd - just continually opauses every 5-360 seconds with the error
The record has stopped because the audio format has changed.
using TAPe and Scene detect.
anyone got any ideas?

I know this is way too late and not really an answer, but I've had the same kinds of problems with PP2's capture function on 3 different decks on 2 different motherboards and 4 different OSes.
My work involves capturing and repairing problematic and old or damaged tapes of all kinds. I understand that there will be some errors (tape stretch, breakage, etc) that can't be handled by the deck/camera hardware directly, and I have no problems with having to manually cue past such issues.
But for otherwise fine and undamaged tapes, for PP2 to suddenly cease capturing, prompting to save less than 2 seconds' worth of video when all that happened was some minor tape noise or an audio frame missing is unhelpful at best and crippling otherwise. It's got to the point that PP2 is completely useless to me, when only the most pristine tapes with the most minimal of problems can be reliably captured.
Since I've used the same hardware (cables, decks) to capture 1200+ hours of "through" footage (i.e. not MiniDV tape playback) without major problems, on the current system alone, that would seem to indicate that the system/cable/deck hardware is fine, it's the problem frame handling that's broken. When 3 different deck/camera manufacturers all react to the same tape problems in the exact same way (at least, for the few common tapes that I've had the ability to test on all 3 decks, all else being equal), that doesn't seem to me to indicate a manufacturer or model problem at all.
However, Adobe's support response in each case (audio drops or minor tape dropouts) is "get the camera repaired by an authorised repairer". (It would seem that I'm an example of a particularly unlucky customer, buying 3 brand-new top-of-the-line 'duds' from 3 different manufacturers in as many years! What are the odds? I should buy a Lotto ticket...) That kind of support response is a real pity, since using the basic transport functionality outside PP2 seems to work perfectly for all but the most severe tape problems, but only using anything except PP2.
To try to tell me that this is a deck hardware failure each time I've raised the same type of problem is disingenuous at best. But that's another story.
The workaround (and yes, there is one!) is to use anything else except Premiere Pro 2.0 for any MiniDV capture operation. It's much easier to use VLC or Nero to perform flawed tape capture, and then use the otherwise sensational editing prowess of PP2 to fix the problems later.
Pity.

Is it possible to import new slides and keep the audio?

Hi,
is it possible to import new slides and keep the audio?
The designers have changed the housestyle of the powerpoints,
but the audio has been recorded in captivate in the meanwhile. Is
it possible to keep the audio of the files and replace all the old
powerpoint slides with new ones? (not one by one by hand off but
all in one button press ?)
Thanks,
wouter
My
Elearning company.

Hi again Wouter
Are you saying that your Library has lots of other audio that
isn't really used on a slide? If so, try right-clicking the Library
panel and choosing "Select Unused Items". This should highlight all
the sound files not in use. Now press the Delete key and they
should be removed from the Library view.
Now you are faced with just what is left. You may not know
which clip goes with which slide. So try this. In your Film strip,
audio attached to the slide should appear as a Speaker icon in the
corner. Click the Speaker icon and pop down (or up) menu should
display. Choose "Find in Library". This should highlight the
associated clip in the Library. Now, if you like, you may
right-click the file in the Library and rename that to something
like "Slide X audio" (so you know which clip goes with which
slide).
Cheers... Rick

How to normalize the audio channel of a video file?

Hi there
I have 100 quicktime movies.
All I want to do is to normalise the audio in them.
I understood that in the Volume correction I need to select - Equalize Volume Levels.
Is that it?
You can watch the movies without the sound boost in here
Also, How can I save the audio File into the quicktime without rendering the video again.
I don't want the video to be encoded again because the quality is really bad for some reason.
Even If I choose Animation codec which suppose to be good.
Isn't there a way of saving the new audio in the movie without encoding it all again?
Thanks
Guy

hello,
DDVideo QuickTime video converter gain can help you.it only copys and normalises the audio for your mov video without encoding again.
Operation Steps：
1.Run the programe.
2.Add you MOV video,
3.Select MOV format in ProfileSettings,
4.There is a "Video Codec" in Video parameter,Please select " copy "
5,Please tick "VolumeGain" box and adjust output target video volume From 75DB to 105DB
6.Select output files directory，
7.click "convert " button to convert video.
The programe also can convert your video to other video format.you need to change Video codec to realize encoding again.
url:http://daydayvideo.com/quicktime-video-converter.htm
Hope it helps you.

Audio plays but not video on abc app?

audio plays but not video on abc app?

Correct. The developers have not enabled it for airplay. Audio is on by default.

If a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT2242 Is it possible to keep the local country but have it display in my language?

Is it possible to keep the local country but have it display in my language?
For example I live in Sweden but am English so would like to have the local setting still for Sweden but all text displayed as English.

Sorry but no, not if you're referring to the iTunes Store. The iTunes Store for Sweden displays only in Swedish; English is not an option.
Regards.

How do you convert the audio from a mpeg4 video file to mp3?

How do you convert the audio from a mpeg4 video file to mp3 format?

Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it. Please could someone help me?

Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it. Please could someone help me?

You appear to be having a hardware problem. Make an appointment at the Genius Bar of your nearest Apple Store to get a diagnosis.

Keeping the audio flow, but changing video scenes

Similar Messages

Maybe you are looking for