Keeping the double side printing box ticked

I want to do double sided printing. I tick the box and all is OK. But next time I find the box has unticked itself and I have to start all over again with system preferences/print and scan/ select printer/ open print queue/setup/driver/ tick the box. How do I make the box STAY ticked? It used to stay ticked but now defaults to unticked after each double sided print job.

To print on both sides (Duplex Mode), you have to
1.Have a Postscript ready printer.
2.Install Pasta
3.Install and Setup third party software like xpdf or Ghostscript to convert the PDF to PS file
4.Setup Printer Style and Pasta Config file
a.Define custom print style like 'Duplex PDF Publisher'
b. Assign this print style to Printer Type with with standard PASTA driver 'PASTA_PDF'
c.Then query printer driver 'PASTA_PDF' and on the arguments field, enter following -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfg
d. Verify that the file $FND_TOP/resource/pasta_pdf.cfg is present and that it contains only one "uncommented" entry corresponding to the installed third party tool, as follows:
preprocess=pdftops -duplex {infile} {outfile}
pdf2ps (Ghostscript) by itself does not support the duplex option. You will need to use XPDF software (pdftops).

Similar Messages

Anybody here have try the double-side printing?

It doesn't work when I try to do the double-side printing. And in the schedule info, it is Single-side --!!. Of course our printer support the double-side printing.So,any idea about this?
And I add the filter to transform the pdf to ps,is this the possible reason that the tray selection and double-side printing do not work?

To print on both sides (Duplex Mode), you have to
1.Have a Postscript ready printer.
2.Install Pasta
3.Install and Setup third party software like xpdf or Ghostscript to convert the PDF to PS file
4.Setup Printer Style and Pasta Config file
a.Define custom print style like 'Duplex PDF Publisher'
b. Assign this print style to Printer Type with with standard PASTA driver 'PASTA_PDF'
c.Then query printer driver 'PASTA_PDF' and on the arguments field, enter following -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfg
d. Verify that the file $FND_TOP/resource/pasta_pdf.cfg is present and that it contains only one "uncommented" entry corresponding to the installed third party tool, as follows:
preprocess=pdftops -duplex {infile} {outfile}
pdf2ps (Ghostscript) by itself does not support the duplex option. You will need to use XPDF software (pdftops).

Double side print

I can't double side print because the pdf size is always changing & my printer only will do the double side print if the document is standard size 8x11. How can I change the size of my adobe so it defaults to the required 8x11?

That is specified when the document is created.
But in your case, can't you get it to print when changing Page Size & Handling, e.g. Fit, or Shrink oversized pages?

Mac Microsoft Word 2008 double side printing

Hi.
I recently purchased Macbook Pro 15, and installed Microsoft Office 2008.
I have a SamSung Express 282 series laser printer.
When I use my window pc or window labtop, it double-side prints all right.
But when I try to double-side print with Mac Pro Microsoft word 2008, it doesn't work.
From the Print menu, I go to 'printer feature' and click on 'reverse two-sided printing', but it keeps saying
"Changing the setting of Reverse Two-Sided Printing to On would cause a conflict that cannot be resolved. No change will be made,"
and does not let me click on it.
Does anyone know what's going on?
I really want to save some trees and do only double-sided printing, but it doesn't let me.
Any help would be greatly appreciated.
Thanks, guys.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_s eries/pixma_ip4200#DriversAndSoftware
Be sure to pick the OS X Lion 10.7 driver from the pulldown menu before selecting the driver category below it.
If that doesn't work, contact Canon. There are some Lion supporting double sided printers for sure.
Mind you,when manufacturers rely on the CUPS drivers as they did in this instance they may have
taken the easy way out, and that might avoid having the double sided printing.
http://support.apple.com/kb/dl899 may be able to patch those drivers to give you double sided printing if the Canon ones do not.
There are a few other open source alternatives*.
When double sided printing doesn't work, the trick is to rotate the pages upside down and feed face down switching odd and even page numbers.
Test with single sheets first, and then once you get the hang of it, do multiple.
I don't know where your printer feeds, so you'll have to try a couple times to figure out the correct direction.

Black ink only & double side printing

This is regarding a printing issue using my newly bought printer. I wish to print double sided using the option black ink cartrige only under grayscale printing. However, when I select double side printing, there were only 2 options under the grey scale printing (off which means color or high quality). Is there a way to select both double side and black ink cartrige? Furthermore, does grayscale printing using high quality option uses ink from the black ink cartrige or also from the color cartriges? thanks in advance

What printer model? What operating system?
Generally there are two options for grayscale printing, either "use black cartridge only" or not. If the "use black cartridge only" box is not checked color ink will be used as it provides better print quality.
Some printers and some drivers do not support "black cartridge only" when printing in duplex mode. In duplex printing a small amount of color ink may be used to underprint the black print to make it dry faster to prevent smearing in duplex printing. (Not intuitive, but it is correct....)
See here for some information on how ink is used. Some ink will be used for servicing even when printing with black ink only.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

PhotoSmart Premium C309a driver problem in Win10 at double side printing

My problem is as follows: I created a catalog in MS Publisher 2013 for A4 paper format with 2 page per paper. I selected booklet side-fold type and double side printing. MS Publisher prepared all pages in correct way. I even created PDF versuions of such pages. But each time when I print pages, the printer keeps make them smaller (I think it scale them for Letter format) despuite the fact I changes in printer preferences A4as default paper source, all documents are in A4 format etc. As result, the printed pages are shifter from the center page on the left side, which is ok for one side printing but cannot work for doyuble side printing as shift is in different directions for result paper. Additionally, I cannot any more print on DVD or CD surfaces as the driver doesn't support sauch a feature. Please let me know how I can replace the native Windows 10 driver with the one for Windows 8.1? Or is there any other solutions except using another OS? Thx, Vlad.

Hi , Welcome to the HP Forums! I noticed that your HP PhotoSmart Premium C309a is having a driver problem in Windows 10 when printing double sided. I am happy to help! According to this guide, How to Use the 2-Sided Feature, it looks to me as if the double sided printing feature is only available to use with regular plain white paper. (Letter sized), which could be why the printer is scaling the size to letter. You could possibly try using an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by , and follow the steps for Windows 8, as they will work on Windows 10. Then you could attempt a custom size print. But as mentioned previously, I am positive that the 2-sided feature for this printer is for Letter sized paper only, and cannot guarantee this will work. Hope this answers your question, and thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

How to stop double side printing on HP ENVY 4500!!!!! HELP ME PLEASE!!!!!

i am going CRAZY!!!! I can't stop with the damm double side printing !!! And it's only using the blank ink cartiage and not the color one!!!!! PLEASE HELP ME!!!!!!!

Hi stressedteacher,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having an issue with the printer doing double sided print out's. So I can better assist you, Please respond with which Operating System you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I look forward to hearing from you and I am always happy to help.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Double Side printing in Lion?

Ever since I upgraded to Lion I've noticed that I cannot double side print in Reader. Other apps are set to double side print without issues, but I can't get Reader to DSP. I have Adobe Reader X (10.1.0), Mac OS 10.7.1 and a Lexmark Prevail Pro705. I've even gone to the Lexmark site and updated my driver. Any thoughts? I checked the sticky on the Forum Homepage about Lion compatability, but I was unsure how to translate the work around to my situation.

I ran into the same issue - Adobe Reader does not print double sided on my Lexmark Genesis S815. Did you find a solution in the meantime?

Double side printing from SAPScript, last page missing

Hello all,
I try to setup double side printing from SAPScript, but have a problem and hope that somebody might help me.
In my form I have two pages with main window (FIRST and NEXT) which have print mode set to 'D' and next page set to 'TANDC'. Page 'TANDC' has only one VAR window which contains terms and conditions text.
Now, everything works fine except that T&C text isn't printed after last page (ie. after last 'NEXT' page). Is there a way to force printing of last (back side) page?
PS: Calling 'WRITE_FORM' from the print program at the end didn't help either.
Thanks in advance.
Grigor

Hi Vinod,
this has a same effect as calling NEW-PAGE from form.
Again, window 'FOOTER' is printed on a new page instead bellow 'MAIN' window and there are no T&C on the last sheet. I also tried to explicitly call text element in window 'FOOTER' before calling 'CONTROL_FORM', like this:
CALL FUNCTION 'WRITE_FORM' "last element in 'MAIN' window
       EXPORTING
            element = 'LAST'
       EXCEPTIONS
            OTHERS = 01.
CLEAR sy-subrc.
CALL FUNCTION 'WRITE_FORM'
       EXPORTING
            element = 'FOOTER'
            window = 'FOOTER'
       EXCEPTIONS
            OTHERS = 01.
CLEAR sy-subrc.
CALL FUNCTION 'CONTROL_FORM'
       EXPORTING
             COMMAND = 'NEW-PAGE'
       EXCEPTIONS
             UNOPENED = 01
             UNSTARTED = 02.
It looks like the 'FOOTER' window is under control of SAPScript, not of print program.
Note: 'CONTROL_FORM' call is placed immediatelly before 'CLOSE_FORM', so at the last possible place.
Kind regards,
Grigor

How do I use the double sided printing with my HP Officejet 6500A plus

I need help with learning to use the double sided printing with my HP Officejet 6500A Plus

Click on the Show Details button just above:
You can configure various options from the dropdown menu just below Orientation.
Printing two-sided requires a two-sided adaptor for the printer. Otherwise, you have to print out odd numbered pages first, turn them over and reinsert into the paper feeder, then print even numbered pages. If you do it right you get a nice two-sided document. If you do it wrong all the even numbered pages will be upside down.

How to get the Double-sided print in SMARTFORM?

Hi Folks,
Can u explain me , how to get the Double-sided print ?
I create two pages : Page 1 and Page 2.
Page 1 contains Main Window and some text data in it.....
Page 2 contains a secondary window with some TERMS & CONDITIONs data.
Print Mode Settings:
Page 1 Print Mode : D
Page 2 Print Mode : Space
I maintained all the above in my Smartform ,
but i couldn't get my second page at all and Double-sided print also....
Is there any settings missing or any to be maintained ?
GIve me a Solution....

HI Surender,
Check this one
http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/90edfc78-dfc9-2b10-dcbe-d4612972ceb9&overridelayout=true
Regards
Ram

I have a brother laser hl 1110 printer. the double side page printing option is greyed out and unusable. anyone know a fix for this? thanks. it prints single side okay.

basically the question is the same as the title of the discussion. double sided printing option is grey and unselectable. i can't figure out if it can be changed to on in the presets etc. would appreciate any help. i am using maverick and the brother hl 1110 laser printer.

Hello! I have the same exact problem and tried your suggestion. I can't find a duplex setting

How do I change the double-sided print setting when printing from a website

I used to know how to change my printer settings when I used a PC but now that I'm using a Mac it's a completely different story. Usually when I print I'm given a print preview screen where I can make choices how to print but some websites just send materials directly to the printer without providing me with a print preview screen so I can change the settings, for example, disabling the double sided feature. Can anyone provide me with simple directions how to correct this issue? I have a MacBook Pro & am printing to an Epson WF-3540. I'm now very computer literate unfortunately. Appreciate any suggestions, especially those that are fairly simple. Thanks so much

Usually when I print I'm given a print preview screen where I can make choices how to print but some websites just send materials directly to the printer without providing me with a print preview screen so I can change the settings,
I cannot identify with what you are saying, as this has never happened to me.
This is a print preview dialog box, in its expanded state. The document it is about to print is the print dialog box, in its non-expanded state. The red arrow points to the control.
Once expanded, there are several screens full of options you can choose from. They are under the pop-up labeled [ Preview ] on this example.

Who/Why did recent updates embed default double-side printing all PDFs

Until the recent updates, I have had no difficulty saving and printing online/saved pdf documents. Today, my printer (set up for single page printing) was comandered by
Adobe PDF and went into double sided printing when when recent and past pdf documents were printed and checked.
THIS IS AN "UNACCEPTABLE" UNANNOUNCED IMPROVEMENT (?).    I was not provided with any list of "options" to include/add/choose regarding default printer behaviour embedded in PDF saved/read/new documents. This used up printer time and ink with loading, notices to reverse and/or note to add more paper. I now have to double check and clear the checked box for double sided, and clear PDF default. When the same supposedly defaut free document is closed then reopened, the default free status has reverted to "double sided"
It should be that this eco-friendly politically correct option should be a printing option that one should check to obtain when appropriate and wanted. I should not be this stupid unannounced, poorly thought-out, aspberger-teckie enforced assumption of proper consumer conduct and needs.

This is my thanks for the swift and professional responses by Dov Isaacs and Dave Merchant to my angry extensive diatribe about a glitch that could have been stated in one sentence/question.
Since 11:55 a.m. Jan 11, after receiving Dov Isaacs' response e-mail notifaciton until this moment, I have attempted to e-mail multiple my thanks response. This was my attempted response: (which I now had to retype, since copy and paste don't work on this reply message):
Thanks for your immediate response. I wentthrough a recent document, changed setting to one sided in both printer page and document default, then printed that document single sided and saved it (replaced previous this this saved one). then closed documents folder, reopened the PDF folder, clicked pring on this new replacement saved document. It now retained the single page setting. I went through other documents previously checked and each one now retained the single page printer setting.
They all previously had retained the double paged setting of the very first pdf that printed double sided.
I now understand that whatever is page paper sided setting of the last printed saved document, once that document is printed, the printer reads future pdfs as the same setting, until a new document with a new setting is printed. The last printed setting then is retained and applys to the rest of pdfs until changed and printed again in a new printing, etc, etc.
Thanks for your (now Dov and Dave) immediate, professional response(s) to my outrage and stupid assumptions. I stand corrected and I apologize.
Now as a note for Adobe/Website from one who spent extensive time searching for anything that allowed me to ask a question, and once found, I posted my question to somewhere that God himself only knew where or who may respond.
One simple easy-to-fix glitch question from a consumer frustrated by naive endless website rovings to post the question, to me, incites outrage. I refuse to throw my computer out a 10 storey window, take an ax to my monitor and drive over it with my car and dump everything on the freeway. Until now, I was taking a deep meditative breath and sputtering FY all.
Compound that with the following seemingly avoidance behaviours and the sputterings become paramount. Suddenly I am listed in Membership Areas (as an expert--someones got to be kidding). My reply/reply to all resulted in the following return message: "jive-2063828440-vep3-2-2g;[email protected] email address as reply or as entered in new message was rejected by receivers servers and was returned as rejected--This is the mail system at host mail.sgaur hosted jivesoftware.com.   (In addition pointing to bottom of each message stating to email or at Adobe Forums and http link to page and Printing and Progress got me nowhere throughout Jan 11 to 6:45 am Jan 12). All areas resulted in message the services were unavailable, until the final message message Adobe is updating webpage.   Adobe contact us resulted in typical tips menues that avoided nonsense consumer e-mail direct contact to anyone, except telephone contact.
To me, one simple solution to e-mail response notification: At the first sentence of each notification e-mail state: No Reply Response to message sender address allowed (whatever posted by other e-mails I receive).
I still don't know how I finally got here in the first place, but thanks to one and all for assistance. No reply required, since I may never find this spot ever again.    K.D.

Automatic Double Side Printing

Here is HP LaserJet Enterprise 600 Series Printer manual check page 117 for settings with screenshots how to set up automatic both sides printing.

Hi Team,
I am using an HP LaserJet Enterprise 600 Series Printer, can I print on both sides automatically without manually feeding the paper back into the printer? If so print share some of the step to achieve that and also assist me with a video link if there is any.
Thank you.
This topic first appeared in the Spiceworks Community

Keeping the double side printing box ticked

Similar Messages

Maybe you are looking for