Keeping volume at a higher level.

How do i change my volume level to be higher? Do I go into setings and adjust it there? Adjusting it during song playback doesnt seem loud enough.

Turn on iPod, scroll to and select Settings, scroll to and select Volume Limit. This by default is set mid to low so children don't burst an ear drum....it's part of the parental control (it can be locked).
David
If any answer helps or solves your problem, please mark the post that helped accordingly, it provides an incentive for posters here to try and help and gives others a quicker way of finding solutions faster, thank you

Similar Messages

Changing OSX default volume setting to a higher level in sound preferences

When I change the default volume setting to a higher level in sound preferences within OSX, it is back at the lower level at the next listening session the following time I use iTunes on my Mac Mini. Within System Preferences there is a section that lets you "choose a device for sound output" but the only choice I have is "line-out" and under the "port" heading there is only "built-in output"--no other choices are shown. I have external speakers attached which I like to use for listening to music as I work. What is the problem? Why won't the higher volume I set remain? Also, shouldn't more than one choice be shown for sound output?

This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
In answer to B_web, I am running my external speakers through the headphone jack.
So, any other suggestions?

Volume higher level in Vista than OSX?

Hi everyone, this isn't a major issue but I'm really wondering why does my integrated speakers goes to an much higher level with windows vista than with OSX??? It's the same hardware and so should have the same sound level on both os... and it's not a slight difference for example to get the same level of sound that 1 bar gives me in Vista(I'm referring to the volume pop-up Icon from Apple) it takes me about 3-4 in OSX... Did anyone notice that too?
And if I'm not alone could Apple explain this situation 'cause I'd love to have the same level of sound in both OS.

resetting the pram can sometimes restore the volume of your mac to its default settings.
see Resetting your Mac's PRAM and NVRAM

What is MacKeeper - 911 for your Mac, Instant Mac cleanup, High-level security, Mac performance boost, Univ? I keep getting a pop up on my iMac?

What is MacKeeper - 911 for your Mac, Instant Mac cleanup, High-level security, Mac performance boost, Univ? I keep getting a pop up on my iMac?

Do not install MacKeeper (and how to uninstall it if you have):
https://discussions.apple.com/docs/DOC-6221
(Please note that references to the original developers, Zeobit, also now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.)
This recent court case is illuminating:
http://www.courthousenews.com/2014/01/21/64695.htm

Where can I find various high level examples of workflows being used

I am about to start a project with TCS 3.5 and have been participating in the Adobe webinars to help learn components and specific techniques but what I am lacking is an understanding of various workflows I can model my project after or take bits from various sources. Why start with Framemaker in this workflow versus RoboHelp or even Word? Questions like this I think come from experience with the process and I am thinking that what I am getting myself into is a chessgame with all these pieces and don't want to paint myself into a corner by traveling down one route. I have seen this graphic:
And this one:
And this one:
But they are too generic and do not contain enough information to really understand the descision making process one must go through on various projects.
Can we have a series of webinars made, all with the underlining theme of defining a working process or workflow, by having guests describe how they have or are using this suite in real life on their own projects? One that might include a graphic showing the routes taken through the suite with reasons why?
My project hopes to make a single source internal site that will tie together various 3D portable industrial coordinate metrology systems (hardware and software). It would be used as a dispersal site for help, communications between users and SME, OEM information, QA requirements, established processes, scripting snipet downloads, statistics, and training (including SOJT). Portable industrial metrology has 8 different softwares that are used and right now about 8 different instruments. These include laser trackers and radars, articulated arms, scanners, structered white and blue light to name a few. The softwares include Spatial Analyzer, Veriserf, CompIT, eMscon, AXYZ to a few there as well. I want to be able to participate and add content to an internal Sharpoint site, push content to users for stand-alone workstations, ePub, capture knowledge leaving the company through attrition, develop easy graphic rich job aid sheets, and aid in evaluations of emergent software and hardware. I would also like to leave the option open to use the finished product as a rosetta stone like translator between the software packages; doing this is the equivelent of doing this in these other software pacages for example.

PDF is definately a format I want to include, to collaborate with other divisions and SME for one reason, but also for the ease in including 3D interactive target models with in it and portability. I plan on being able to provide individual PDFs that are very specific in their topics and to also use them to disperse user guides, cheat sheets or job aids... something the user may want to laminate on their own and keep with them for reference, printed out. Discussion in these sheets would be drasticly reduced to only the elements, relying heavely on bullet points or steps, usfull graphs, charts and tables... and of course illustrative images. I am thinking that these should be downloadable buttons to print on each topic section, not in a general apendix or such. They would hopefully be limited to one page, double sided 8x10.
The cheet sheet would have a simplistic flow chart of how or where this specific topic fits in the bigger picture,
The basic steps,
Illustrations, equipment, setup
Software settings for various situations in a table or chart,
Typical result graph to judge with,
Applicable QA, FAA regulation settings or concerns,
Troubleshooting table,
Topic SME contact info
On the back, a screen shot infographic of software process
The trouble here is that I have read that FM has a problem sometimes in succesfully transfering highly structured or formatted material to RoboHelp. Does this then mean that I would take it from FM straight to PDF?
Our OEM material is very high level stuff... basicly for engineers and not shop floor users... but that is not to say they don't have some good material that could be useful. Our internal content is spread out across many different divisions and continents, with various ways of saying the same thing. This leads QA to interpret the information differently depending where the systems are put to work. We also have FAA requirements that need to be addressed and reminded to the user.
Our company is starting to also see an exodus of the most knowledagble of the users through retirement. Capturing the knowledge and soft skill packages they have developed working here for 20-30 years is something I am really struggling with. I have only come up with two ideas so far:
Internal User Web based Forum
Interviews (some SMEs do not want to make the effort in transfering knowledge by participating in anything if it requires an effort they don't see of benefit to themseleves), to get video, audio or transcription records

High Level Network Design

Hi Guys
I am posting this because I am starting my career into network design and want some help in it. I am at present in need of a high level design overview as I need to prepare some high level network design documents. Can anyone shower some thoughts in it as how about doing this and if any there is a template for HDD so that it maybe useful.
Also I believe in keeping information as transparent as possible to the readers of the document and need someone to explain in very simple terms if at all it is possible.
Thanks a lot
Vin

Hi Vin,
I would check the Cisco SBA and Validated Design Zone as a first pass.
Lots of great design documents there.
As for how I would create a high level design - keep it simple. You just want an overview of the connectivity - e.g. for a dual-site head office with 100+ branch wan, I would only show a single branch site as a template.
Every network is different, but the more documentation you write and read the more you will define your own style.
Apologies I can't give you any of my customer's documentation - NDA's and everything!
Regards, Ash,

High-Level LabView Control System Engineer Job Opening - Seattle

High-Level LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Senior Software Controls Engineer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad in subject matters concerning performance, installation, and maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis, systems analysis, digital filtering, and both linear and non-linear signal processing.
BSEE, BSME or BS Physics may be a good fit, but not limited to these areas.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
Tom Wittmann
(253)395-4321
1222 6th Av N
Kent, WA 98032
[email protected]
Attachments:
ServoSled Brochure.pdf ‏1215 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

APO DP: Disaggregation to product&plant level from higher levels.

Hi.
We do demand planning on groups of products and for country/region in general, we have around 48.000 CVC's in our current setup. It works very well.
A new situation has arisen where we need to have the forecast split down to product and plant level.
As is we simply don't have the information at this level of granularity.
I don't see how we can add for instance product to our setup, we have around 20.000 products so the number of CVC's in DP would become massive if we did this.
I was thinking that perhaps something could be done by exporting the relevant key figures to a new DP setup with fewer characteristics (to keep the number of CVC's down) via some infocubes, perhaps some disaggregation could be done via some tables and the BW update rules. This still leaves the issue of how to get the figures properly disaggregated to plant and product though.
Does anyone have experiences on how to get the figures split to lower levels from DP when you're planning on a higher level?

Simon,
One approach as you mentioned can be creating Z Table where in you set up disaggregation proportion from product group level to product level or product location level.
Product Group X 100 Product A@loc1 10
Product B@loc1 90
Download your planning area data into infocube C and then use BW routines to convert the data from group in infocube C to lower level refereing Z Table....into another infocube..
SAP also provides such standard functionality of spliting the aggregate Demand plan to detailed level
SNP plan..through functionality like location slit or product split.
Essential you will be using same concept in yor BW solution or you may also want to consider the
release your DP to SNP planning area its as solution of diaggregation of data to lower level.
Regards,
Manish

Error message require adminstrator or higher level, already did disk repair

Hi all,
I can't seem to install my printer drivers without an error message coming up:
The program you are trying to install requires admin. or higher level access.
I have gone to disk utilities and tried to repair disk permissions but it no use. It still keeps coming up.
I'm logged in as admin and am the only user on my mac. It seemed to happen when I updated to 10.4.4
My printer stopped working so I did as the instructions said and deleted the printer, but now I can't reinstall the drivers.
Help please!!!
powermac g5 Mac OS X (10.4.4) dual 2.0 pros
powermac g5 Mac OS X (10.4.4) dual 2.0 pros

For questions about ClamXav please visit the ClamXav Forum
cpflueger wrote:
I ran ClamXav and it just told me I had 11 errors
Not sure exactly what you mean by errors. If they show up in your Scan Log, then they almost always involved files that you don't have read access to.
If they were errors during Definitions Update there will be more in your Update Log and are usually network related.
If they were infections then I would need to know the infection name and exact location of the file in order to be able to advise you on those.
To get detailed infomation on what ClamXav has found, after completing the scan, click in the top pane of the ClamXav window where it shows the Infection / File Name / Status to make sure it's in front and type the key combinations <command>-A, <command>-C (or choose "Select-All", "Copy" from the "Edit" menu) to copy the information to your clipboard, then come back here and type <command>-V or choose "Paste" to show us what was found where.

High level process model for a Pulp & Paper Industry

Hi:
Someone can help me?, i'm looking for a organizational reference model for a pulp & paper company, under the alignment for best practices in to SAP R/3
I need know what is the best model for this kind company (chain value, macro process, business process, sub process...)
Thanks in advance
Omar Perea

hi,
thanks for yor points.
at that time it was opened.for me also it was warning the same, any way iam providing some more info on it. pls have a look on it.
Pulp and paper industry facing IT modernisation needs
Today most pulp and paper industry companies face serious financial challenges to increase return on investment and improve capital utilisation.
Companies are working to improve the efficiency of their supply chains and thereby reduce working capital, increase transaction velocity and improve inventory turnover. Mergers, acquisitions and alliances are reshaping the pulp and paper industry. Although the pulp and paper industry has invested heavily in IT systems, a large variety of old systems is often complex, inflexible in regard to integration and difficult to operate. As they reflect past organisations and business models, the streamlining of business processes is difficult.
Mega trends in the pulp and paper industry IT.
The pulp and paper industry is stepping into a new phase of business evolution driven by consolidation of industry, globalisation and ever-increasing competition. These market drivers are forcing the pulp and paper industry to put a greater focus on cost efficiency. These focuses are creating totally new challenges for the organisation, specifically in the IT area.
IT is increasingly becoming a commodity. This is a result of product standardisation and the popularity of off-the-shelf-products that facilitate the economies of scale. This phenomenon is also supported by increasing utilisation of competence resources in low-cost countries.
Managing change becomes more and more difficult. Very often companies face the need for new changes before they have seen the benefits of the previous ones. The cycle of change is short and the transformation environment becomes very complicated. On the other hand, IT becomes the tool in forcing business changes to happen. Often the only practical way to roll out new processes and practices is through the modernisation of information systems.
Like many other industries, the pulp and paper industry is concentrating on providing digitalised self-services as part of their business development.
Industry background
Since the consolidation and globalisation of the pulp and paper industry, there has been increasing pressure to continuously improve both its internal and external efficiency. In the large pulp and paper mills, production management systems typically consist of several different systems, which might also be from different suppliers. Systems are often isolated islands, which are successful in managing information of their own area but they lack the comprehensive information exploiting and sharing. This has resulted in a complex and inflexible architecture of legacy systems. These legacy systems are expensive to manage and difficult to develop to meet business requirements.
This pressure has led to massive IT investments and a continuous rebuild of the IT environments in order to meet efficiency challenges. Although many pulp and paper mills have invested a lot in building up their business supporting IT, especially Enterprise Resource Planning (ERP) systems, the return on investment is often difficult to measure. There is a lot of potential to improve usability of systems by harmonising business processes and integrating the systems more efficiently in order to better support actual business needs.
Most pulp and paper industry companies have thus come to a point where a more radical rebuild and renewal of the entire IT and network environment is required. Fortunately, the conditions for this have improved over the last few years, due largely to an increasing range of commercially available application platforms adopted for the pulp and paper industry, the acceptance of common industry standards, and the evolution of refined integration and migration methods.
Renewing and harmonising the companys operations and IT systems is still, however, a demanding undertaking. Securing continuous operations, while at the same time replacing the core systems and processes, requires a high level of expertise in pulp and paper industry processes and information technology. To complement the in-house competence, the pulp and paper industry will need to establish partnerships with outside solution providers and system integrators. To minimise risks and keep control of business-critical technology, new delivery models will be a necessity.
i am also giving some pdf sites pls go thru them
www.fpl.fs.fed.us/documnts/pdf2000/scott00c.pdf
www.bfe.admin.ch/php/modules/publikationen/stream.php?extlang=en&name=en_542051780.pdf
thanks
karthik

RFC: Proposing a high level iteration facility based on Collections

I am requesting for comments for an experimental package I developed providing a high level facility for iteration on Java 2 Collections.
You can browse the javadoc at http://www.cacs.louisiana.edu/~cxg9789/javautils/ and the code is available for download from http://www.cacs.louisiana.edu/~cxg9789.
Basically, the package provides an interface Task that has a single method job() which is called for every element in a given collection. There are some static methods for using this kind of scheme and iterating over collections. An example would be: Iteration.loop(collection, new Task() {
          public void job(Object o) {
            // do something on o here
        });Now you may wonder what is the use of going into this much trouble when I can just get an iterator and do the same thing? Well, creating a class that represents the whole iteration opens a number of new possibilities. You can now have methods and variables exclusive for the specific iteration and reuse it. You can even subclass it for variants. This proved very useful in my application especially when I developed the StringTask class that is available in the same package.
Nevertheless, you can see it for yourself that we've got rid of the iterator and the condition checking that appears in conventional loop constructs. For details you can look at the Iteration at http://www.cacs.louisiana.edu/~cxg9789/javautils/edu/ull/cgunay/utils/Iteration.html and StringTask at http://www.cacs.louisiana.edu/~cxg9789/javautils/edu/ull/cgunay/utils/StringTask.html
I was wondering if you Java developers would find such a scheme useful. Thanks for your interest..

Heh... now I need to remember back...
No I don't, the internet comes to the rescue :-) I
was wrong, apply is the simple "function apply"
function, the list function of interest was (is)
called map.
http://www.cse.unsw.edu.au/~paull/cs1011/hof.html
This was very helpful. Now I know what you're saying. Actually this may very well be the hidden influence that lead to this system. The map operation also exists in Lisp and Scheme. I remember really liking it when I first learned about it.
My approach isn't exactly the same as neither of map, fold or filter. But I think I can create subclasses of Task which act the same way with these. I will try to do this in the near future.
Just as a comment on the design, I would have
maneuvered the list of getSomeResult() into an object
that knows how to render itself as a String. That may
well be using your Iteration feature over the internal
list, or other feature as the developer sees fit.This point is well taken. Actually my program uses this kind of approach in many places, however I wanted to give a less confusing example here.
Your iteration is a perfectly valid pattern to iterate
over a collection, and one that could be
applied in many places in my code. I'm unsure I
will migrate to use it, because it tends
towards a large number of small objects to perform its
function... which sometimes can be a simplification,
but in this case can obscure multi-threading issues...
spreading a loop over a collection across multiple
classes makes it less obvious what is happening to the
contents, or what synchronization is required, what
locks have been acquired, or what concurrent
modifications are possible.On the other hand, it might be more secure to have operations on collections in a place as an Iteration class to keep them together. Maybe you already mentioned it in your message. I can understand your concern in using the system, though.
To keep this information in one place, you could use
an anonymous inner class, but then you have lost the
reusability and succinctness of the iteration, which
are two of its largest benefits (Being a high-level
function using centralised, tested code being the
third, and probably the largest)I started using small inner classes very extensively. Maybe this can alleviate the problem, since they're not anonymous and can be reused. However, there is still a problem using (subclassing) them from outside of the class. I found a way to do this, too. It only works in special situations, though.
Assume you have an inner class:
public class Outer {
class Inner { ... }
}You can extend this inner class if you have another class extending the Outer:
class NewOuter extends Outer {
class Inner extends Outer.Inner { ... }
Thinking about it, your iteration is at a higher level
than foreach... and would benefit from using it
if were ever supported by the JVM. They are slightly
orthogonal approaches to looping abstraction, foreach
being syntactic and your pattern being heuristic.We're in tune here, I'd be interested to use the foreach operator and the Iterable interface as primitives in my system if they will ever be provided in Java. Currently, they are not offering me anything extra, since the Collection interface provides me with what I need.

Unusual high level of SPAM

Hello,
I experience super-high level of incomming SPAM e-mail for last 2-3 weeks. Everyday I am getting for 20-25 the same templetes e-mails come to Inbox, and the same 20-25 SPAM in my Jank folder. I keep forwarding to [email protected] as recommended, but it does not help at all. Just found 16 more in the Inbox today morning, then have to spend time and check/filtering manually, and that is not cool.
Seems to me like filtering stops working on the mail-server side. All those e-mail are very similar, look 100% SPAM, and I do not get why it does not filtered on the server instead of pusshing to my mail account.
Also wonder if there is any chance Apple Support may help?
Thanks,
Mark

I'm with you on this. I've been getting hammered with spam the last 2-3 weeks also. Incredibly frustrating to keep up with. I've turned off my mail on iPhone until this gets figured out. Seems iCloud is an easy target!

"Administrator or higher level privileges." But I am the Admin!

I have a very frustrating problem. I noticed this for the first time when my printer stopped working. The scanner works, and I can run print tests from my computer but it won’t print. When I tried to reinstall the drivers I got an error message that says, “The software to be install needs Administrator or higher level privileges.” I typed in the correct password, which works for everything else. I am the only one using my computer and I am an administrator. This has never happened before.
Now I can’t install anything without this error message, not even my regular updates. Which is freaking me out.
I’ve tried everything I can think of. I’ve run disk utilities, repairs and permissions. I’ve created a new user (administrator) and tried that password/username.
I couldn’t find any other threads on here with an answer to this problem.
Thanks so much in advance if you can help me!! It is much appreciated! I have a lot of papers that are due next week and it would be awesome if I could figure this out.
Ask me anything you need to know. I have a duel power G5 with extra ram, running OS X.
Thanks again,
Jessie
[email protected]

found similar discussion elsewhere:
http://macosx.com/tech-support/update-osx-10-3-9/7699.html
.plist is temporary preference file for any application
try using file search for "installer", if "installer.plist" is not found anywhere you may need to reinstall the OS.
first you could try creating new user in System Preferences, restart computer, login as new user and try installing something.
if it works under different user, some other prefernce could have been corrupted in original setup.
in that case more drastic thing would be to log in as original user, go to your user home folder, then "library" folder and moving whole "preferences" folder to desktop.
after restart all settings will go to defaults though - network, printers, dock, desktop pics etc.
if it still won't work, OS files got corrupted and you may need to try "archive and install" option from 10.3.x installation disks:
http://docs.info.apple.com/article.html?artnum=107120
keep in mind it's a good idea to have backup of important files just in case.
try it step by step starting with creating new user and take your time.

Maintain Columns for Higher Levels in Hierarchy when using Drill Down

Hello all,
I've searched through this forum looking for an answer to this, since I thought it might be a common question, but I wasn't able to find any related content. So I apologize if this has already been answered in the past.
I would like to know if when drilling down in a WEBI report, it is possible to automatically add dimension columns to a report as you drill down to the lower levels in the heirarchy, and keep the columns with the higher level dimension values, rather than replace those columns, which is the default behavior. As a simple example, suppose I have the following columns in a report:
Product Sales Amount
Now suppose I have set up a heirarchy in the Universe with Product, Sub-Product, then Region, in that order. In the WEBI report with the drill filter options enabled, when I click on the Product link, the default behavior is to replace the Product column with the Sub-Product dimension and display the following:
Sub-Product Sales Amount
Instead, I would like it to display:
Product Sub-Product Sales Amount
Then subsequently, of course:
Product Sub-Product Region Sales Amount
Does anybody know of a simple way to accomplish this? I suppose this could be accomplished using the openDocument method with links to separate reports showing the addtional columns, but this seems a bit complicated for a relatively smple requirement. I'm hoping that there is an existing simpler solution to this problem. Please advise. Any information would be greatly appreciated.

Bernardo,
The drill down capability is vertical and not horizontal. There are two solutions, the one of open document as you mentioned is one. The other solution depends on the way you have deployed your system. If you have given users the capability to run reports in "modify" mode (WebI), then they can insert columns to the grid according to the scenario you mention
Product Sub-Product Sales Amount
and forego using the "drill fiter" per se. If your deployment only permits most users to view the report in "read-only" mode (InfoView), then you have limited options.
Thanks,
John

HT1476 Hi, I have an iPhone 4s running iOS 7.0.4 and the phone keeps going of whenver battery level drops to 20% and it give the warning. It turns off immediately after I dismiss the warning message. I LOCKED THE PHONE AT 21% and I was able to play music

Hi, I have an iPhone 4s running iOS 7.0.4 and the phone keeps going of whenver battery level drops to 20% and it give the warning. It turns off immediately after I dismiss the warning message. I LOCKED THE PHONE AT 21% and I was able to play music to 4% which means there is no problem with the battery, this seems to be a programming error.
Earlier suggestion include that the battery has a dead cell but it wouldnt keep playing music for over 2 hours it it had a dead cell.

My issue with IOS 7.1 and higher is my Bluetooth for the phone still works...no problem but the music does not work with bluetooth...I have an Acura TSX 2010...Acura said there are no incidents reported, but me...I just upgraded to IPhone 6 and still no good....as soon as i hit the AUX button it say USB...not bluetooth...ugh

Keeping volume at a higher level.

Similar Messages

Maybe you are looking for