Keeps Crashing out runs so very slow with more than say 50 images

I useually come home from a shoot with around 2000 photos, I normally put theses into one directory in Lightroom called 'Temp Photos', this is so that I can go through and delete the duds, after that I will go through and rotate any that are slightly off square, and then finally I will Colour and Tone adjust what is left, normally ending up with 1500 to 1800 photos.
The problem is this, I need to reload Lightroom after the import, the main reason for this is that when I load up the Task Panel it stats that Lightroom is using up around 780Mb RAM and around 99% CPU, and the system just grinds to a hault, that is if I can get Task Panel to even load, Lightroom seems to be so memory hungry that I normally can not get any response from the system at all, and have to resort to holding in the power button on the PC to shut it down and then boot from cold again.
I need to do this about 10-20 times when working on this amount of images, as the more that I work with it the slower it gets, some times I can guage it right and I can quit out of Lightroom and restart it before it hangs the system.
The system is a Dual Xeon 2.8GHz running XP SP2, 2Gb RAM, a 512Mb Video Card and load of Hard drive space, So why is this software SO memoryu hungry, and what Can i do to speed it up.

> what Can i do to speed it up.
When you import, make sure you render standard previews.
After that, go to grid mode and the smallest available cell size. Look at the cells. In the upper right corner you'll likely see three dots. Wait for them all to disappear and then page down. Repeat until you get to the bottom. When you are done, restart LR.
Let me know if that speeds your performance.

Similar Messages

Intel Mac Mini runs slow with more than one app running.

Hello, I just bought a new 1.66 Mac Mini. It's stock. When I don't have any applications open and I go to open one like a web browser or iTunes, they open very fast. If I have say iTunes or a browser open and I go to open another app, it opens very slow. I have counted up to 12 bounces of the icon before an app will open but the same app will open in one or two bounces of the icon if nothing else is open. Is this caused by only having 512Mb of RAM?

I have never tried the Sims 2 (PC version) on a PC with integrated graphics, but I got good performance on a Dell laptop (512 MB RAM, Intel Pentium M 1.4 Ghz, nVidia GeForce Go5200 FX / 64 MB VRAM). I don't know how much impact the integrated graphics could have on its performance. Upgrading to 1 GB, however, should ensure that you get decent performance and even if you don't need that Gig it will make your computer faster.
When using Windows under Boot Camp, your Mac will perform like any PC with the same hardware ...
Mac mini1.25 Ghz G41 GB RAM40 GB HDDAirPort Extreme Mac OS X (10.4.6) External 250 GB LaCie HDDLaCie FW DVD-RW DL 16x20 GB iPod w/Color Display

Oracle report is not running on application server with more than 700 recod

Hi,
I have developed oracle report using dev suite report builder. When I am running using report builder then its running fine. Whenever I am deploying on application server and trying to run then its not executing. Then I have deployed same report with less than 700 records then its run fine.
Please advice me if you have any solution
thanks in advance
umesh

Hi Pavan,
Thanks for reply.
I have resolved this issue. This issue happen because of report server not able to handle large data. To resolve this issue I have made report server traces service off. Because of making traces off the report server fully utilized for report generation.
Thanks,
Umesh

Running a BEx report with more than one query in Background

I am having a workbook with 2 queries .This workbook needs to be executed at a particular time every day and then save this file to a application server location .
The file name has to dynamic, as everday a new file has to be created with some date stamp.
Please let me know the steps/ ideas to achieve this

Sudhakar,
are you sure that it has to b a workbook ? running queries independently can be done .. am not sure if a workbook can be scheduled to run...
One alternative is to use APD - have the queries run and populate two ODS and then have these ODS in a multiprovider and have one query output for the same - seems to be a very longworkaround...
Another option is to have the queries executed in an ABAP programme and then have the results in an internal table and push both the result sets into an excel sheet ad save it in the application server.
For reading queries in ABAP there is a functionmodule for the same .. something like RSDRI_INFOPROV_READ .. I am not too sure of the name but there is a function module for sure..
Hope it helps..
Arun
Assign points if it helps..

How can I use bridge to create web galleries with more than 10 images?

I am new to building web galleris for my website. When i try to load more than 10 images in a gallery , Bridge cuts off all images beyond 10. I am confident that I can do this if i can find the right settings

I am not at my PS computer right now, but I think the Preview only shows 10 images (for speed) but they will all be there in the final output.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

My itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Imac is very slow with downloading mail

My imac is the ast weeks very slow with downlaoading mail.
I am using mail 5.3 from apple
Nothing has recently been chanched in my internet setting or internet speed
Anybody an idea what can be wrong?

Hi, I worked out what you recommended, but I do not see any difference at speed.
Mail starts normal, though that is also somewhat slow,
Before it has finished downloading mail (even is there os no mail!) it takes sometimes 2 minutes!
Also there was no"boing"when starting up, with following your procedure, is it normal?

TC VERY SLOW with backup

Suddenly, TC is VERY SLOW with backup. In fact, I went in and discovered that it had not completed a backup since July 19th. I started one last night and when I checked this morning (about 10 hours later) it was 70MB into a 2GB backup. An hour and a half later it was at 100MB and an hour after that it was at 125MB. At this rate, it's going to take a couple of days so I cancelled the backup (it then went into it's housekeeping routine of "cleaning up"). BTW, I had quit all applications before I started the backup and TC said I had 454GB of free space. I'm not running any AV software and I have OS 10.6.8 I'm on an Ethernet network to the TC (I also have Airport active - could that be an issue? It never was in the past)
Any ideas would be appreciated.

So...I may have panicked when I saw all of those empty folders in my Document folder...however, when stopping the backup to TC (the 'cleaning up' process of stopping took more than 2 hours), my folder contents showed up. I guess that process takes the file index pointers offline or something so I couldn't see file contents during the process. I then did a permissions repair and a verify on my hard drive.
But the bad news is that my Time Machine is still showing EMPTY! I currently running disc utility 'verify' on my TM backup volume (it says the projected time to complete is 3 days!!!) The disc utility says that there are 4,000,000 files in the backup volume - I just can't see them. When I ran Time Machine, it only has 'today' - no prior backups - even though Time Machine Preferences reports that the oldest backup is August 1, 2010 (one year ago) and that the last backup was July 19, 2011. They are not there.
I've seen some other posts like this, so I don't think I'm alone with this problem.
The good news is that all of my folders and files on my computer appear to be intact. The bad news is that previous Time Machine backups are not there (or they can't be seen - even though the 1TB backup volume is in fact half full).

Mail has 16k messages, and performance is very slow, with loading times taking up to 5 seconds every time I open Mail. How can I increase performance?

Mail has 16k messages, and performance is very slow, with loading times taking up to 5 seconds every time I open Mail.
How can I increase performance?
I'm running a MacBook Air 4GB 1.7GHz 10.7.2.
Graham

One possible solution would be to organise your inbox into folders.
Its never relly good on any system to have one folder that has everything in it.
Try going to you web gui for that mail account and organise your folders and move mails from your inbox into corresponding folders for better organisation.
Several folders containing the same amount of one folder will usually load a little quicker as the folder may not be accessed to download its content unless veiwed.
So having 10 folders with organised content, and you inbox as an area thats to hold only new emails would work much much quicker with imap.
Most imap servers will only update the contents of a folder when its veiwed.

Facebook loading is very slow with nearly no images , i'm using mac

facebook loading is very slow with nearly no images , i'm using mac os x 10.8

i did it many times and the same problem exists

AE CS6 very slow with footage

Hi guys,
I am using AE Effects CS6 (11.0.4.2) on a new Macbook Pro with these specs:
2.8 GHz Intel Core i5
16 GB MHz DDR3
Intel Iris 1536 MB
The problem I am having is that when imported footage is visible as footage or a layer, AE becomes very slow with every click of the mouse on either the timeline or the footage in the viewer itself causing the color wheel to appear, often for 30 seconds at a time. Strangely, dealing with the composition has no issues.
Any ideas guys?
Thanks in advance

Try transcoding the footage to a production codec and see if that makes a difference.
Like, use the Adobe Media Encoder to make them something like QuickTime with the PhotoJPEG codec.
See if that helps with the performance.

I installed yesterday iCloud , since the performance the system is very slow with pinwheel at every clic

I installed iCloud yesterday, since the system is very slow, with pin wheel at every click
What can I do?

I would ask in the dedicated iCloud forum. Good luck. https://discussions.apple.com/community/icloud

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

Ftp.belnet.be mirror very slow with updates

The mirror that is closest to my location, ftp.belnet.be , seems to be very slow with updates for AL.
XFCE4 was updated to 4.2.3 around nov 10 on archlinux.org.
11 days later xfce4 4.2.2 is still on belnet , and not replaced by the new version.
Since it's also a fast and reliable server, i don't mind waiting a few days, but more than a week is TOO long.
What's the use of a bleeding edge distribution when you can't get updates that have been available for more than a week ?
For now, i have fallen back on archlinux.org , but will look for another european server.

In contrast with the name, that server doesn't seem to have ANY arch packages anymore.
:: Synchronizing package databases...
--00:34:46-- ftp://ftp.archlinux.de/pub/archlinux/cu … .db.tar.gz
=> `current.db.tar.gz.part'
Resolving ftp.archlinux.de... 134.109.132.98
Connecting to ftp.archlinux.de|134.109.132.98|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /pub/archlinux/current/os/i686 ...
No such directory `pub/archlinux/current/os/i686'.
failed to synchronize current
--00:34:47-- ftp://ftp.archlinux.de/pub/archlinux/ex … .db.tar.gz
=> `extra.db.tar.gz.part'
Resolving ftp.archlinux.de... 134.109.132.98
Connecting to ftp.archlinux.de|134.109.132.98|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /pub/archlinux/extra/os/i686 ...
No such directory `pub/archlinux/extra/os/i686'.
failed to synchronize extra
searching the site from the www page for pacman gave many results, but none of them were for AL's pacman.

Keeps Crashing out runs so very slow with more than say 50 images

Similar Messages

Maybe you are looking for