Keeps restarting, running out of things to try :(
My iPhone froze up earlier tonight, after holding power and sleep to restart it now all it will do is come up with the apple logo, sit there for awhile (probably 5 minutes or so) then restart. Sometimes the loading 'wheel' displays half hidden under the logo. I have tried restarting it, restoring from iTunes, putting it in DFU mode then restoring from iTunes, restarting it without the SIM card in, and putting it in DFU mode then restoring to the 2.2.0 firmware from iTunes (it was on the latest). Nothing has worked. This phone has never been jailbroken, never been dropped, gotten wet, etc... I am really hoping it's not hardware as it's no longer under warranty and I can't afford $200 for out of warranty repair if it is. Any help or ideas would be greatly appreciated.
1) Power off the iPhone by depressing both the sleep/wake button on the top of the iPhone and the home button. Wait for the iPhone screen to turn black aka screen-off.
2) Depress the home button and connect the iPhone/iPod sync cable into the docking port on the bottom of the iPhone at the sametime without removing the home button.
3) You should be able to see the Apple logo coming up on the iPhone and then the recovery screen with be shown after the Apple logo:
4) iTunes will start and inform you that it has detected an iPhone in recovery mode and you should restore your iPhone to start using it.
5) Perform your firmware restore.
7) Re-sync your phone to add back all your data and apps.
Similar Messages
-
Very slow speed, run out of things to try
Dear Community
I have a real issue with my broadband and after 3 hours on the phone and one openreach engineer I am now waiting for another engineer.
I was told that there are no faults on the line and have now tried 3 hubs (all Type 3) and 6 micro filters
Can anyone think of anything else I can try?
My speedtest results are showing download speed at 0.08MB
Upload at 0.89MB
The ADSL results are here
Line state:
Connected
Connection time:
0 days, 01:21:06
Downstream:
4.711 Mbps
Upstream:
1.047 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.5 dB / 6.3 dB
Line attenuation (Down/Up):
42.2 dB / 25.3 dB
Output power (Down/Up):
20.0 dBm / 12.7 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
260352 / 167
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
457163 / 254
Error Seconds (Local/Remote):
4859 / 66Over 1 million HEC events in 3 hours at test socket... that can't be right can it?
Line state:
Connected
Connection time:
0 days, 03:00:02
Downstream:
4.711 Mbps
Upstream:
1.047 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.2 dB / 6.2 dB
Line attenuation (Down/Up):
42.2 dB / 25.3 dB
Output power (Down/Up):
20.0 dBm / 12.7 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
580495 / 177
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1040033 / 260
Error Seconds (Local/Remote):
10786 / 74 -
it keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing.
Connect the iPod to your computer. Click on the iPod under Devices and iTunes. How large is the "other" category as shown in the colored bargraph? If larger than about 3/4 GB, restore the iPod. That large of "other" indicates corrupted files.
-
What causes my iphone 5s to keep on running out of memory without any new download. I recently updated to ios 8.2
I meant to say without downloading or receiving anything
-
I am getting a full disk message.
When I check I have a large amount of material described as Other and is coded yellow on the information bar."Other" simply means anything that isn't recognised as music, video, images, software (apps) or a backup. So, PDFs, .doc files, text files, disk images yadda yadda yadda. All sorts of things.
If you want to get an idea of what's taking up space on your drive, try GrandPerspective. -
Using wifi on iPhone 4 I can no longer print to wifi how printer which is also showing as not available on Mac desktop. I have checked everything I can think off
Okay, thank you . This tells me we may be experiencing an issue with the driver or wireless connection. I suggest using the following steps to delete the printer from device and printers, and the driver from the server properties. 1. In the ‘Devices and Printers’ folder2. Choose ‘Print server properties’.Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window4. Choose the printer you want to uninstall and click ‘Remove’5. Choose 'Remove driver only'6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this. If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed. If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
The Setup and software screen will open and you can click on Connect a new printer.
I look forward to hearing back from you again. Let me know the outcome, and we will proceed from there. Thanks. -
Is this an issue because of the new IOS.
I Am getting exactly the same issue. Update iPhone and ipad to iOS7 and now can't add any tunes to remote. It kicks me out! Strange iPhone 5 on iOS 7 works great
-
Program runs out of things to do, but doesn't stop
I have a program that when it ends should stop after saving the data to excel spreadsheets, but for some reason the program doesn't stop despite nothing else going on. If I select highlight execution there are no animated executions going on. The program just sits there and I have to hit the stop hexagon to get the program to stop running. Any ideas?
It would be useful if we could see the code.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs? -
I'm near the end of my rope. I've been more than patient dealing with jdev problems because every major problem has been solved with elbow grease, education, blood, sweat, and tears and, at least, a workaround. But I'm not too sure with this one.
10.1.3 EA 1 ADF warnings and I'm not using ADF. How-to get rid of them?
For some time I've been developing an extensive JSF JSP app with JDev and everything was ok until a couple of days ago when these warnings started (after making navigation and managed bean changes to faces-config.xml with the graphics tool). This "new" problem causes deployment failures to standalone oc4j which is a major problem for us.
But now I've run out of things to try, I'm at my wits end, and I'm almost out of patience with JDev. I'm going to give it one more good try tomorrow and if the end of the rope is at hand I'm downloading eclipse or netbeans or whatever.
Could be time to clean house and sweep out Oracle AS Enterprise Edition and JDev.
How appropriate --- I tried to post this to the forum and got this response ---
Internal Server Error
The server encountered an internal error or misconfiguration and
was unable to complete your request.
Please contact the server administrator, [email protected]
and inform them of the time the error occurred, and anything you
might have done that may have caused the error.
More information about this error may be available in the server error log.
Additionally, a 500 Internal Server Error error was encountered while
trying to use an ErrorDocument to handle the request.
Regards,
Al Malin
(269) 923-6301Sorry, Al, that this has gotten so frustrating. It sounds like you are up against it, which is a place we've all been and all hate to be.
I think, though, that you will be more likely to get help from others in this forum if you tone down the rant a few notches. My guess is that a lot of otherwise helpful folks, including some from Oracle, won't even bother to select your posts because of the flaming all caps titles and, although we've all gotten to the place a time or two of being ready to dump the tools we're using, the threat of that is more effective at showing how you're feeling than at getting you any sympathy.
Breath, brother. Bump your posts every couple of days. Plead every now and then. Open a ticket with MetaLink. Ask your co-workers for help thinking about the problem. Answer others questions where you can (just to build up a little forum karma). Tell you boss you need her/him to back off ...
(What's the saying about "free advice is worth every penny you spent on it" ?)
Hope things work out.
Johnny Lee -
I keep getting "running out of memory" messages. It seems over 80% of my memory is taken up by "other". What is included in "other"?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
What is "Other" and What Can I Do About It?- Apple Support Communities -
WRT54G keeps restarting with Windows 7
Hi guys,, i realy need some help here,, i'm using laptop with Win 7 Home Premium + WRT54G ver 7. Every time i connect my laptop via LAN or wireless network, the WRT54G ver 7 keeps restarting by it self. I try to used another laptop with win xp and it works perfectly fine,,
How can i fix this?? can somebody help me??
Sorry for my bad english, cause it's not my native language,,
Solved!
Go to Solution.I tried to reset the router but it still didn't work,,
Where can i find firmware update for WRT54G ver.7??
I've been searching on this site but there is no firmware update for WRT54G ver.7,,
Thanks for the tips,, -
I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
i restarted my ipod touch and it ran out of power half way,now it will charge for one little bar and then start restarting again without charging until it runs out, it also wont show up on itunes, can you help me
the only other thing i can think of is the put the ipod into recovery mode
but as itunes cant find it, it may not work
hold the power button for 3sec's keep holding the power button now also hold in the home buttton the screen goes black
now let go of the power button keep the home held in the screen goes blue and shows the itunes with the cd and the up arrow with the usb cable, connect to itunes to start recovery mode.
or take it to an apple store fore them to help with recovery mode but this can take up to 3hrs
or try out www.ipodsurgery.co.uk -
Help! While doing workaday tasks on my 15" MacBook Pro with 10.6, I got the dreaded slowly unfolding darkened screen with the message "You need to restart your computer. Hold down the power button until it turns off." Kernel panic, I guess.
In the past, in the few times this has ever happened to me, I held down the Power button as instructed, and the Mac turned off.
HOWEVER, this time around, holding down the Power button does absolutely nothing! It doesn't make the computer turn off, no matter how long I hold it down, nor if I try holding it down in combination with other keys.
Needless to say, the OS is completely frozen otherwise, and no keyboard or trackpad actions have any effect.
And since this is the new kind of MacBook Pro -- there's no way to remove the battery!
So, is the only solution, to unplug it from the power supply and simply wait for 8 hours (or whatever) until the battery runs out of juice? Say it ain't so!
(I'm writing this on someone else's computer, needless to say.)
I NEED access to my computer's files TODAY for important work-related matters. Am I out of luck, or is there some secret way to get this darn thing turned off and restarted?If you insist! :
Mon Aug 15 16:37:52 2011
panic(cpu 0 caller 0x2aab55): Kernel trap at 0x0000901a, type 6=invalid opcode, registers:
CR0: 0x80010033, CR2: 0x9e3c6000, CR3: 0x00100000, CR4: 0x00000668
EAX: 0x5c017827, EBX: 0x00000000, ECX: 0x0000000c, EDX: 0x2e80fba0
CR2: 0x9e3c6000, EBP: 0x953d3c18, ESI: 0x0c3c9180, EDI: 0x4633a000
EFL: 0x00010246, EIP: 0x0000901a, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x953d39f8 : 0x21b50c (0x5d42fc 0x953d3a2c 0x223974 0x0)
0x953d3a48 : 0x2aab55 (0x59616c 0x901a 0x6 0x5962b7)
0x953d3b28 : 0x2a09a8 (0x953d3b40 0x105a00c 0x953d3c18 0x901a)
0x953d3b38 : 0x901a (0xe 0xe3ff0048 0x46330010 0x9260010)
0x953d3c18 : 0x126b657 (0x4633a000 0xc3c9180 0x0 0x0)
0x953d3c48 : 0x1275d0c (0x4633a000 0xb0b9edc 0xc3c9180 0x127589c)
0x953d3c78 : 0x1275e73 (0xb0b9c00 0x4633a000 0xb0b9f20 0x8)
0x953d3ca8 : 0x124f46a (0xb0b9c00 0x4633a000 0x953d3cd8 0x213ebb)
0x953d3cd8 : 0x53717b (0x4633a000 0x8d451f4 0x8d451f4 0x1)
0x953d3d28 : 0x5671d4 (0x4633a000 0x8d451f4 0x8d451f4 0x1)
0x953d3d88 : 0x286234 (0x4633a000 0x8d451f4 0x1 0x0)
0x953d3df8 : 0x21d8ba (0x102f0568 0x8cded84 0x102f0570 0x102f05a4)
0x953d3e38 : 0x210a3a (0x102f0500 0x953d3e7c 0xa0118f8 0x953d3e70)
0x953d3e98 : 0x216c9d (0x102f0500 0x0 0x0 0x0)
0x953d3f18 : 0x294e13 (0x953d3f44 0x0 0x0 0x0)
0x953d3fc8 : 0x2a1018 (0x9b2cba0 0x0 0x10 0xa1bd044)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelHDGraphics(6.2.4)@0x124b000->0x12f9fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x952000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x985000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x963000
BSD process name corresponding to current thread: WebKitPluginHost
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 412491560738451
unloaded kexts:
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8 (addr 0x5bef7000, size 0x12288) - last unloaded 412342043556592
loaded kexts:
org.pqrs.driver.KeyRemap4MacBook 6.7.0 - last loaded 411988463406028
com.usboverdrive.driver.hid 3.0.1
at.obdev.nke.LittleSnitch 2.2.05
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleIntelHDGraphics 6.2.4
com.apple.driver.AppleIntelHDGraphicsFB 6.2.4
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.GeForce 6.2.4
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.driver.AppleHIDMouse 162
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0 -
Everytime my iPad runs out of battery i have to plug it into itunes and i have to keep restoring it
everytime my ipad 2 runs out of battery i have to plug it into iTunes. Once i have done that, everytime i do it tells me to restore it.
Ps. i have dropped my iPad and it keeps pressing the home button randomly (and even presses the home button countless times it turns to negative colours). I have tried everything:
resetting the iPad
turning it on and off
update it to the latest iOS etc.
Also when i plug my iPad into iTunes wanting to sync the music (which i havnt been able to do in months!) it automatically restores or tells me to do so anyways.Hey BuffaloB2013,
First, try force closing the App Store, which you can find out how to do here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
And if that doesn't work, I would reset the device:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Welcome to Apple Support Communities!
Have a great day,
Delgadoh
Maybe you are looking for
-
How to clear line items in accounts not managed on an open item basis
We are getting ready to archive FI accounting documents from years 1993-2002. We encountered a great deal of documents that did not archive during testing because the documents have open items. We were given bad advice in the beginning on how to se
-
I have set up the find my iphone app to be hooked up to my phone, computer, ipod and my family's devices. Thru the find my iphone app you can delete the hard drive of any device to keep a theif from getting your personal information. But lets say my
-
Hi All SAP experts, My company has implemented 2 Systems SAP Landscape with one development and one production server which are running on R/3 Enterprise 4.7 (Kernel Release 6.20) with Microsoft SQL 2000 as database server. I have the following quest
-
Alert Repeat Count For Monitor
When I look in the Active Alerts view in the console many of the alerts have a repeat count. I understand if they are created from a rule and have alert suppression turned on this means only one alert was created instead of having multiple alerts tha
-
When will be the rewards given fror reaching mile stones
Hi, I have reached 256+ points milestone. So when and where will the T-Shirts be given. I just wanted to know this. Cheers, Karthick