Keeps trying to install build 10041 even though I already have it

My problem is in the title: Windows keeps trying to install flb impressive 10041 core even though I already have it.
Any help? Thanks!

Hi,
That's to say, your current Windows 10 already was upgraded to 10041 edition, isn't it?
You can access to the Registry path below and modify the valume: ThresholdOptedin, REG_DWORD, 0
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
If problem persists, try to rename Applicability to Applicability.old
for test
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Apple TV keeps saying I need to verify payment when trying to rent a movie even though I already have.

    I have verified payment several times in iTunes store. Apple TV keeps saying I need to do this even though I have entered the correct security code for the correct card (last 4 digits are right). What am I missing?

    Then I would contact iTunes

  • After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?

    After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?

    Check for new 64 bit software for the modem, other wise you I'll probably have to boot your Mac in 32 bit mode first.. And then every time you want to go online.
    I have the Sierra wireless 306 and have their 64 bit lion software installed. Works well.
    Best.

  • Whenever i try to install an app frorm my iMac to my iPod it tells me i need to authorise my mac even though i already have any help anyone?

    Whenever i try to install an app frorm my iMac to my iPod it tells me i need to authorise my mac even though i already have any help anyone?

    Howdy there 15itechnic,
    It sounds like you are getting a prompt when trying to use iTunes to sync an app to your iPod that you need to authorize your computer but it already is. I would next verify that the app in question was purchased with the same Apple ID as the one that you have iTunes authorized.  The following article will help you find the Account Name. Open iTunes and go to the Apps section under Library in the Sidebar.
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • IE 11 Keeps Trying To Install.. Even After IE Blocker Toolkit

    Can someone please help me out here.  We are having an issue with Internet Explorer 11 trying to install on our users computers.  They can't run IE 11 at this time as the software does not support it.  I have run the IE Blocker 11 Toolkit,
    and if you go into Windows Updates is still there.  I have also Stopped the Windows Update Services. Deleted the c:\Windows\Software Distribution folder, restarted the services, ran the updates and it is still there.  
    Some users are able to get around it by "hiding" the update but this wont work for every one.  Can someone please help?
    Thanks

    there is a GPO setting which may help you:
    \Computer Configuration\Windows Components\Internet Explorer\Install new versions automatically
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • My computer keeps telling me to download Flash Player even though I already have.

    Why does my computer keep telling me to download the latest version of Flash Player even though I have downloaded it multiple times.  Am I forgetting to do something?

    Its seems to be a browser specific issue. Try a different browser like chrome or firefox, it should work.
    For fixing IE or Safari, lets follow below suggestions :
    Run the Flash Player Uninstaller as applicable for your machine(i.e.Windows or MAC) and remove flash player.
    For MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    For Windows : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
    Restart the machine.
    Download and Re-install Flash Player.
    Restart the browser and check.
    You might also wanna check the below articles ::
    Enabling Flash Player in Internet Explorer 9 : http://forums.adobe.com/thread/885448
    ActiveX Filtering in Internet Explorer 9 : http://forums.adobe.com/thread/867968
    Cheers!
    Arpit

  • I recently pre ordered an album and it was released today but it says I have to pay even though I already have

    I pre ordered an album maybe a month ago, and it just came out today. They released some of the songs before hand and I have all 5 of those on my phone. But today when the whole album was released it didn't download to my phone. I went and checked the ITunes store and it said i never bought it even though it did. HELP ME!!

    Yeah it happened I me too! I thought that I was the only one. I need the 5sos album like now 

  • Keeps asking me to update to flash 10 everytime I restart my computer even though I already have.

    Whenever I try to view anything with flash it says I haveto update to the latest version(which I did) but it doesn't seem to want to stick to the browser. So in order to get any flash to work I have to close FF4 run the Flash installer again then reopen FF.. '''then it works for a bit '''and then stops working and asks again. I tried this link http://www.youtube.com/swf_test.html but the flash wont work so what do I do?

    look like you'd better ask this at adobe's official support pages. well, use windows search, search getflash.exe, and rename it. and be careful, maybe there are not only one getflash.exe in your system. rename them all.

  • I bought the complete package & now when I try to install photoshop, illustrator & indesign it says my trial has expired and gives the option to buy even though I already have, HELP

    help me pls

    The prompt that asks to buy will have an option of " license this software" at the bottom, click at that , it will ask you to sign with your Adobe ID.
    Or you can sign out & sign in back to CC desktop to activate.
    If the issue still persists, please contact Adobe Support http://adobe.ly/yxj0t6
    Regards
    Rajshree

  • CS6 is constantly asking me to register even though I already have?

    Hi guys,
    Basiclly I'm having issues with my CS6 that I installed a few months back.
    I got a student verison of CS6 installed it and sent off for the serail number like you do, once I had got my serial number I went to use it and it seemed to work fine the first few times I opened any of the CS programs but it soon started asking for my serail number again and again, like it was still in the trail version, I contacted adobe support who were helpful and suggested I open it in admin and see if that works, which it did for a short period of time.
    But I am now back to square one when it asks for my serail number every time I try to use it, it works once I've entered the number in but it's getting annoying having to input that code mulituple times a day.
    I was hoping some one would be able to shed some light on this matter for me.
    Thanks a bunch.
    SB.

    Hi swarlsbronson,
    When you enter the serial number your system tries to connect to the Adobe activation server and because of any reason if your system is not able to connect then you could have this problem.
    I think you should check the hosts file.
    Location of Hosts file
    In Mac--->Open Finder window --->click on Go on the top --->click on 'Go to folder' --->Type '/etc' ----> open 'hosts' using Textedit.
    In Windows ---> C:\Windows\System32\drivers\etc\hosts Open it with Notepad
    In the hosts file if you see any Adobe entry just delete that entry and then save it.
    Once all this is done you can launch the product ---> enter the serial number.
    Close the program and reopen it and check if it asks for the serial number again or not.
    Thanks
    Kapil
    Thanks
    Kapil Rupani

  • I have an Apple ID, a game centre account and an app but when I try to log into FaceTime or iMessage it says I need to verify my email address even though I already have. Why?

    Please help me!!

    I dunno if this will work for you but I had the same issue today and had to redo what I did about two weeks ago.
    I went to "Settings" then to "General" and scrolled all the way done to "Reset"
    I didnt do a reset that erased data, just the ipad settings.
    I had to re-enter all my wifi stuff but after trying to log back into facetime it worked fine.
    It's a pain in the arse (second time I've had to do this in a couple of weeks) but it worked for me, Good Luck

  • When I start Firefox by clicking on a link in e-mail or another document, Firefox starts downloading an update, even though I already have 4.0.1 up to date.

    When Firefox is not started and I click on a link in an e-mail document, as it starts up, Firefox acts like I need an update and starts downloading an update. After "updating" several times, I verified that I have 4.0.1 and it is up to date, but this continues to happen every time Firefox starts up as the default browser.

    Extensions
    Produtools Manuals 2.1 Community Toolbar 3.21.0.1 ({b2bf7b3f-bf0b-4c48-aec6-f92c51be63e1})
    Open the Add-ons Manager by
    Pressing the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by; '''Tools > Add-ons.'''
    Hot key; '''<Control> ''(Mac: <Command>)'' <Shift> A)'''
    On the left side of the page, select Extensions.

  • Cant download itunes 7 even though i already have itunes and emac ??

    Running OS X 10.3.9 on emac which it asks for but itunes 7 still wont download?? Any advice please?

    After struggling on it for few hours, I managed to find out how to download iTunes7 for my new Ipod!
    It's very easy and simple!
    So to sum up:
    1. You quit the installer and iTunes
    2. You go on your finder: Macintosh HD / Library / Receipts /
    3. Drag the following files to the Trash:
    iTunes.pkg
    iTunesX.pkg (where X is a version number)
    4. Open the iTunes installer again and proceed with the installation.
    ENJOY!!!
    Estelle
    for any other info, I found all the info on:
    http://www.apple.com.pl/support/ipod101/help/1/index.html#2

  • When I try to download OS X Lion my Macbook says that I need at least 2 GB of memory even though I already have it

    My MacBook says I have 17.41 GB available but the Mac App Store will not let me dowload OS X Lion. It says "We could not complete your purchase. Mac OS X 10.7 requires at least 2 GB of memory."
    What does this mean? This is confusing me.

    The warning is in regard to RAM memory not space on your hard drive. Your computer needs 2 GBs of RAM for Lion. You will need to upgrade your RAM to at least 2 GBs in order to use Lion. I suggest more if the computer can accommodate more than 2 GBs.

  • Roxio keeps trying to install, have searched forums for answer, need help

    Hello,
    About a month ago I bought an 8300 series Curve.  That night I tried installing Desktop Manager with Roxio, had lots of problems, read the forums, and decided against using Roxio.  I unintalled everything (so I thought), and reinstalled Desktop Manager without Roxio.  Everything was fine until this week.  The computer was on but not used for a couple days while I was out of town: upon my return I saw that Roxio was trying to install itself again.  I'm assuming an update was pushed out.  Now, I can't get rid of it.  I have uninstalled Blackberry Desktop software.  I have deleted everything from my computer that has 'Roxio' or 'Sonic' in its name.  I have run my registry tools in System Mechanic Professional.  It still keeps trying to install.  I even tried system restore.  I disabled Windows Installer in msconfig, now it just keeps popping the installer window up and closing it.  I can't download and install the Microsft Installer Cleanup utility mentioned on some forums because either a) I have disabled my installer, or b) when the installer is enabled, I get an error message telling me that another installation (aka the Roxio installation) is already in progress.
    Surely, there must be some line in some code somewhere that I can get to and change so I can stop this thing from triggering Roxio to install.  And, how do I clean it off and ban Roxio from ever trying to install anything on my system again?  It's literally like some kind of virus.
    Thanks.

    This is an addendum to my previous post:
    I somehow was able to sneak in an install of the Microsoft Installer Cleanup utility.  But when I went to run it, Roxio or anything related was not listed at all.   So, that was not a good solution.
    I tediously went through the entire registry and deleted all references to Roxio.  I re-enabled my Windows Installer.  Now, something keeps trying to install, but never references Roxio anymore.  The Windows Installer window pops up, then disappears.  This happens in spurts now: the window pops up about 3 to 5 times, then stops popping up for a minute or two, then starts again.  There's obviously one more registry reference that doesn't have 'Roxio' in the name.  If anyone knows it and can point me to it, I'd be grateful.
    In the meantime, I now have to figure out how to fix the resolution on my monitor.  Obviously deleting some Roxio shared thing affected that, and I can't seem to find the right settings again.  I feel like suing Roxio for the time I wasted today!

Maybe you are looking for

  • CProjects - Issue related to WFM & Project role

    Hello All, Immediately after log-on I see two errors: "Communication with the WFM Core system is not possible" "Unable to establish connection to LiveCache" Ignoring these message, if I go ahead creating project, system allows me to create the projec

  • Predictive Analysis 2.0 - 'BW' connect feature ?

    Hello folks, In the latest Predictive Analysis, do we have 'BW' data connect feature ? BW offline connection or connection via Lumira is fine. Looking forward to hearing any response. My customer'd like to know this. Thanks a lot. JH Yang.

  • Conditional Formula based on Print Number

    Post Author: DigYerOwnHole CA Forum: Formula Hi,Does CR have a way to base formulae on the print copies?Here's my situation:Using Crystal to print off sales invoices. The invoices have to be printed three times. On the first copy the invoice has to s

  • Appcmd.exe add backup Output message: ERROR ( hresult:80070002, message:Command execution failed.

    [04.01.2014 21:41:55.0743] [1] 0.  ErrorRecord: System.InvalidOperationException: Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.  Output message: ERROR ( hresult:80070002, message:Command e

  • [SOLVED] Lancelot doesn't work for KDE 4.5.1

    When I try to add the Lancelot widget I get the error message "lancelot_launcher not found". Interestingly, when I downgrade the lancelot package to: kdeplasma-addons-applets-lancelot-4.4.5 it works ok. I noticed the files and their locations have ch