Ken Burns effect won't work with imovie 6.0.3

I'm hopeful to find a way to use the Ken Burns effect in my 6.0.3 HD imovie. Does anyone have a solution to this problem? I can't get it to work.

Did you empty iMovie's trash after creating your clips? Did you previously apply the Ken Burns effect to that particular clip and now want to change the settings?
If you already had the clip/photo imported using the Ken Burns effect, and then emptied the trash, you cannot redo the KB settings. It is a bug in iMovie. You will get the black frame when you try. The only thing you can do is reimport the photo.
Here is an explanation of the problem (Thanks to Matti Haveri) :http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#stillupdate

Similar Messages

  • Preview of Ken Burns effect doesn't work with some pictures

    I just recently installed a new graphics card (ATI Radeon 7500) on my Sawtooth, 1.2 GHz, so I could utilize the Ken Burns effect in imovie HD. It works but only partly. It works great but with some pictures the preview pane doesn't show the photo. What I see is a what looks like bad reception on an old TV (fuzzies and the picture is distorted so bad you can't even make it out). With other pictures the preview shows up fine. I'm sure I've loaded the drivers. What else can I do?

    Hi Tonyy13.
    I am presenting the same problem. I can set the Ken Burns' effect while I am with the pictures before placing them in the Clip or Timeframe viewer. After placing them there, if I try to edit the picture (either by right clicking and choosing -edit picture or by control clicking and doing the same, I ended up with a black background. If you change the setting in this black ackground and update this changes they will be effective. So, you can change the slide duration, and everything in the sliders but without an image.
    I was running System 10.3.9 and I thought this was the reason. Today, I went and bought Tiger but it didn't sove the problem. I do believe it is a bug in the program. According to Apple's Help and David Pogue's "The Missing Manual" this shouldn't happen.
    If you solve this problem reply to this posting. If I did I will reply to your posting. Thank You.

  • Ken Burns Effects Don't Work in iMovie HD (I've Tried Everything)

    Version:
    OS X 10.4.10
    iMovie 6
    *Hardware 1:*
    PowerMac G4 Dual 500 Mhz, 1GB RAM, Internal 40GB HDD and Internal 320 GB HDD
    *Hardware 2:*
    PowerBook G4 500 Mhz, 512MB RAM, Internal 20 GB HDD
    Problem:
    This problem occurs on both of my G4 Macs. In iMovie HD, I imported a JPEG from iPhoto with Ken Burns Effects on. The still photo appeared properly in the Clip Viewer initially, but appeared as a black screen in the iMovie Monitor. Once the imported photo with the Ken Burns Effects completed rendering, the clip in the Clip Viewer turned white and appeared as a white screen in the iMovie Monitor. I have tried almost everything I read about in these forums in search of a resolution.
    *Resolutions that Failed:*
    1. The photo is definitely a .jpg
    2. Tried importing the actual .jpg file as well as importing from iPhoto.
    3. QuickTime and all other Software updates have been applied and are running on the most current release.
    4. Repaired disk permissions.
    5. Created, saved and manipulated the iMovie file in the standard Movie Folder on my main internal hard drive. (i.e. – I'm not saving to an external HDD)
    6. Created, saved and manipulated the iMovie file in the standard Movie Folder on my secondary internal hard drive. (i.e. – I'm not saving to an external HDD)
    7. Deleted the 'mac.imovie.plist' file and created a new one.
    8. Attempted to do apply the effects logged on as a different user.
    9. Saved file, restarted machine and reopened numerous times but the problem persists.
    10. Tried a lower resolution photo and the problem persists.
    11. Attempted to import all the photos I planned to use, added transitions to all of the clips and rendered completely. Saved the file, restarted the machine and reopened the file with no change to the blank clips.
    12. The iMovie trash emptying issue did nothing to help.
    *Additional Notes:*
    1. The problem is confined to the Ken Burns Effects in iMovie. I am able to work with true video clips without incident.
    2. Ken Burns Effects operate properly in iPhoto 6 using the slideshow functionality.
    3. I would use iPhoto, but it seems like it would be easier to line up specific sections of an audio track with certain Ken Burns Effects in iMovie. (i.e. – a crescendo at the 16 second mark of the audio track coincides with the end of a 'zoom' on a photo, transition from second 16-17 second mark, new photo at the 17 second mark and pan left to right from 17 second mark to the 25 second mark.) Point is that it lines up precisely with the markers on the audio track, which seems far easier to do in iMovie than iPhoto.
    4. Please help me, I'm going nuts troubleshooting this bug! I can't find any resolution that works.
    Thanks in advance for the help.
    Message was edited by: Charlie Brown Jr.

    Hmmm. You seem to have tried, without success, most if not all of the methods of resolving a Ken Burns black screen issue.
    Some thoughts that have occurred to me:
    1. Perhaps your G4 500mhz Mac is not fast enough. I think that the minimum spec for iLife '06 is 733mhz. Might have nothing to do with this problem, but I just mention it.
    2. Are the sizes of your images too large, as can happen with some of these new high def cameras? iMovie has trouble working with very large images.
    3. Do you have any 3rd pary plug-ins, particularly in Quick Time, that could be causing a conflict?
    4. Do you have enough disk space for the project to operate?
    5. Have you done a recent Quick Time update? Some users have reported a problem with that.
    6. From your post, it appears that you have continuously worked within the same iMovie file that exhibits the Ken Burns problem. If this is true, try creating a new iMovie project and experimenting with a few clips to see if the problem persists in the new project.
    Ken Burns issues can be very frustrating. I think that you will need to keep trying things until something works. Wish I could be more help, but perhaps some of the tech experts on this forum will have some workable suggestions.
    There is an application called Photo to Movie that reputedly has a far better Ken Burns type of effect. If you can't resolve your problem, you might try downloading that app. I believe that it offers a demo download.
    Good luck.

  • Ken burns effect won't work

    hi everyone
    i'm trying to export a slideshow into a quicktime movie maintaining the ken burns effect, but the quicktime movie file won't show the effect - even if in the slideshow settings the "automatic ken burns effect" is ticked on (when i watch the slideslow on the screen, before exporting it, the effect is there).
    do you have any suggestions?
    another question: can you recommend a picture size? the quicktime movie will be, together with a video created qith FCE, on a dvd.
    thanks guys in advance

    Did you try the other account approach that GLO suggested? That can tell you if it's a system wide issue or just one associated with your particular account.
    What you should have is your Receipts folder, other that those two subfolders, are many .pkg files which represent software that has been installed on your Mac. Those packages tell the Software Update and other installers what version is already installed so it can decide if an update is required.
    Have you tried using the Share->Send to iDVD menu option to get the slideshow into iDVD?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Imovie 10.0.1- Ken Burns effect do not work

    imovie 10.0.1- Ken Burns effect do not work

    Is the photo you're trying to apply the Ken Burns effect to in a Project? It won't work if it's just in an Event.
    More details here:
    http://help.apple.com/imovie/mac/10.0/#movc6e02f503
    http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
    Matt

  • Ken burns effect won't die

    I want to globally turn off the Ken Burns effect for my 722 slides in my iMove slide show. I have clicked on Project Properties, Timing, Fit in Frame, apply to all.
    But still it won't go away. I really don't want to do one at a time. What else can I do?

    Click on one of the thumbnail images in the project timeline, then select "Edit > Select All" from the menu. All clips in the project will now be highlighted with a yellow border.
    Now click on the small gear icon on one of the images. From the drop-down menu select "Cropping & Rotation". (Alternatively, click on the Crop, Rotate & Ken Burns tool in the centre toolbar - or simply press the C key on the keyboard).
    In the Viewer, select Fit (in the top left corner). All clips will now be changed to Fit.
    It's best when starting a new project to choose your preference from "File > Project Properties", then make a selection for the item "Initial Photo Placement". iMovie's default is Ken Burns (as you've discovered).
    John

  • Can I turn the Ken Burn Effect off when using the iMovie app on my iPod touch 5th generation?

    I have an iPod touch 5th generation and I'm trying to make a movie using the iMovie app. When I put an image on there it moves from side to side and zooms in and out. I believe this is called the "Ken Burn Effect". Is there any way that I can turn the Ken Burn Effect off without having to adjust the image position and zoom level to be the same for the start and end points?

    Hello MisfitxCaleb
    Unfortunately, the Ken Burns Effect cannot be turned off in iMovie for iOS. Like you mentioned above, having the photo at the same start and end point is the best way to make it appear as if it isn't moving/zooming.

  • Blue Yeti Pro Microphone won't work with iMovie or Photobooth :(

    I have my Yeti Pro connected to my macbook pro (version 10.6.8) that I use with my beats studio headphones. Whenever I record myself in garage band with the mic and the headphones, the audio sounds crystal clear. Whenever I record myself in iMovie or Photo Booth, with the headphones and the Yeti mic, the audio becomes all buzzy and poppy and the sound comes in and out. It sounds awful. In iMovie I made sure to select the Blue USB audio 2.0 option for the voiceover sound option, but the same thing happens. I don't want to have to record my video seperately from my audio and then edit them to match up later.
    Please Help!
    Thank you

    Hi Kevin,
    Two suggestions:
    Make sure that the camcorder is connected to a power outlet, not running just on battery power;
    As alluded to by thesurreyfriends, try a different FireWire cable. If you have a Rocketfish cable, it has been known to cause problems. I have a Belkin 9 pin to 4 pin (FW 800/400) which works perfectly with iMovie '11, using my older Sony DCR-TRV20E.
    John
    EDIT: I don't have a Thunderbolt port on my earlier model MacBook Pro, so my situation is different to yours.
    Message was edited by: John Cogdell

  • Ken Burns Effect not working as expected.

    Hi,
    I have created a slideshow in iPhoto 08 and want to have all of the slides use the ken burns effect except the first one (i want this to be a 20 second title photo). To get this to work, i have disabled the Automatic Ken Burns effect in the settings menu and then clicked the Ken Burns checkbox in all of the photos from the second one onwards. Even with these checkboxes selected, the photos just stay still and the ken burns effect does not work. Am i going about this the wrong way?
    Any ideas appreciated.
    Joe.

    I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
    Try that first (it is easier )
    LN

  • Why is ken burns effect not working on individual slides I have amended when sent to iDVD

    When making a slideshow in iPhoto, I changed the zoom and scan on individual slides as instructed in the Help dialog; these showed perfectly when played.  However, when I shared the slideshow to iDVD, those particular slides were just 'still' and there was no Ken Burns effect at all.  Why did this happen?

    The Slideshow was created in iPhoto and then shared to iDVD.  The Ken Burns effect works on all the photos that used the basic "Ken Burns' setting.  However, on some of the photos I tried to amend the scanning to zoom into particular faces or parts of the photo.  When I played the slideshow in iPhoto, these amended photos were exactly as I wanted, but after 'sharing' it and viewing it in iDVD, those photos I had altered were 'frozen' and the Ken Burns effect did not work at all, neither the automatic version, nor the specific way I had set it.  All the other photos still had the Ken Burns effect as expected.  I am using  iPhoto 11, 9.1.5, I haven't had this problem in the past.
    If you have any ideas why this should have happened I'd be grateful.
    Thanks

  • Preview of Ken Burns Effect is a black screen!!

    So, I am doing a movie for my parents, and I have 102 photos that I have loaded into IMovie. I loaded them in to the clips section, as I am not a huge fan of iPhoto personally. At first, no problems, but later, as I dragged photos into the playhead area, my photos wouldn't allow me to preview the Ken Burns Effect. I would drag them into the playhead, click on "Meda" button, and then select the Show Picture Settings button. The preview screen goes black as the effect scrolls through the process, disallowing me to see the preview. I have deleted the pictures from IMovie, re-inserted them, and started over (AAAARRRRRGGGGGG!), and it happened again.
    Any Ideas? Thanks for the help!
    Oh, and I have made no modifications to my machine (no new graphics card), and the pictures are all in .jpg format.

    Hi Tonyy13.
    I am presenting the same problem. I can set the Ken Burns' effect while I am with the pictures before placing them in the Clip or Timeframe viewer. After placing them there, if I try to edit the picture (either by right clicking and choosing -edit picture or by control clicking and doing the same, I ended up with a black background. If you change the setting in this black ackground and update this changes they will be effective. So, you can change the slide duration, and everything in the sliders but without an image.
    I was running System 10.3.9 and I thought this was the reason. Today, I went and bought Tiger but it didn't sove the problem. I do believe it is a bug in the program. According to Apple's Help and David Pogue's "The Missing Manual" this shouldn't happen.
    If you solve this problem reply to this posting. If I did I will reply to your posting. Thank You.

  • Limited ken burns effect and exporting out the slide show

    im trying to create podcasts of photos ( perhaps 50 )
    with OPTIMAL ken burns effects panning and zooming
    with my own musical scores using garageband. Using transitions and Voice overs and eventually uploading to a web account with iweb.
    Is it better to create this all in imovie?
    Iphoto is too limited with its very limited KenBurns effect.
    I also dont see the individual time setting option for each image. where is that in iphoto. It seems that every photo has to be the same duration.
    some have recommended iphoto then garageband
    but i see too many limitations with iphoto.
    anyone have similar experiences?

    Yes you can do this with vertical photos.
    Click on the little icon at the top left of the photo thumbnail in your project. This will bring up the photo editing panel.
    If you want the vertical photo to show up full screen, click crop, and pick which portion of the vertical photo you want to show.
    If you want to see the entire vertical photo, click "Fit" and the entire photo will be shown, but there will be black space on either side.
    Now click on "Ken Burns" to add the motion effect.
    When finished click "Done".

  • Mixing Ken Burns effected images w/ stills

    I'm creating a slideshow that mixes images with the Ken Burns effect on, and images with the effect turned off. I've noticed that when I place a non-Ken Burns'd image immediately after a Ken Burns'd image, the playback isn't accurate. The still image appears black or doesn't accuratly play back what's represented on the timeline.
    I've dug through a lot of threads here but haven't found my answer. And help or just links to other threads would be great!

    The workaround for this, for people running Snow Leopard, is to insert a smallest possible Cross Dissolve transition between the Ken Burns clip and the still. Actually, probably any transition will work.
    The problem seems to be related to Quicktime 7.6.6, and manifests with stills, not movie clips. However, Snow Leopard folks, unlike those running Leopard, have not successfully been able to revert to an earlier version of Quicktime--at least as far as I know. You will notice that the problem does not manifest between Ken Burns photos or video clips, but only when non-Ken Burns stills are involved. Ken Burns stills are really movie clips. Inserting a transition will also turn a still into a movie clip. Thus evolves the workaround.
    Hope this works for you.

  • Ken Burns effect -- artifacts

    When I import photos into an iMovie MPEG-4 project with Ken Burns effects, the result is quite lousy. There are clear artifacts: blocking, unsteady zoom, shimering lines. To me it looks like the results of a poor MPEG-4 compression, resulting in compression artifacts. Any way to get better results?

    Photos come out better in DV projects than they do in
    MPEG-4 projects. Not perfect, but better.
    There are many conversations here discussing the
    quality of photos. Search for words like "blurry",
    "Jaggies" and others.
    Karl
    Karl,
    I'm not sure what a "DVD project" is exactly or how one would create one within the iLife suite of programs, but I would like to echo the observations of the original query. When I impose Ken Burns effects on photos imported into iMovie from iPhoto, the result can be unwatchable. This is especially true with lines than with solid objects. I think what we're hoping for is a way to get around this rather than to join the ranks of the disaffected. Any ideas?
    Leonard

  • Ken Burns Effect Help

    When using the Ken Burns effect with iMovie HD to zoom in on a picture I would like to be able to hold the zoomed image for a few seconds. The only way I have found to do this is to import the same picture twice. The first uses the Ken Burns effect to zoom and with the second I try and match the zoom and position of the finish point of the first. There is always a little jump when it transitions from the first to the second. Anyone know a better way to do this?
    G4   Mac OS X (10.4.3)  

    The trick is to use Option-drag to duplicate the Ken Burns clip you've made, then edit the duplicate clip to behave as you wish. The duplicate will begin with the same settings as the original ends, which prevents jumping.
    More here:
    http://discussions.apple.com/click.jspa?searchID=239705&messageID=961026
    Karl

Maybe you are looking for