Ken-Burns-Effekt abstellen in iMovie '11

Liebe Leute,
ich besitze iMovie ’11 deutsch – also mit deutschsprachigen Menüs. Die englischsprachigen Hilfeseiten zu diesem Problem habe ich gefunden, jedoch bringen sie mich nicht viel weiter, weil ich die deutschsprachigen Äquivalente der englischsprachigen Menübefehle nicht ohne weiteres finde. Deshalb stelle ich diese Anfrage bewusst auf Deutsch und erbitte eine Antwort, die sich auf die deutschsprachigen Menübefehle bezieht. As I said: The English-language support pages were of no great help to me as a user of the German-language product.
Das ist mein Problem: Ich möchte für das Importieren und Darstellen von Einzelfotos in iMovie den Ken-Burns-Effekt abstellen. Welche Einstellungen muss ich vornehmen?
Dank im Voraus.

artur_from_luenen wrote:
… ich besitze iMovie ’11 deutsch …
… iMovie ist multilingual - läuft Dein System auf English, wäre das gleiche iM auch in English … das nur am Rande
… möchte für das Importieren und Darstellen von Einzelfotos in iMovie den Ken-Burns-Effekt abstellen. Welche Einstellungen muss ich vornehmen?
cmd-J oder unter Ablage/Projekteinstellungen definierst Du wie iM vorgehen soll:
… such Dir die aus, die Du am meisten brauchst. Im Projekt selbst kannst Du natürlich jedem Bild individuelle Eigenschaften zuordnen … das ist hier die Voreinstellung.

Similar Messages

How to turn off ken burns effect in new imovie

The new iMovie---11-- how in the heck do I turn off the Ken Burns effect? Nothing against Mr Burns but.... I don't want everything to move!
Thanks!

Go to File/Project Properties and you can define the default behavior for adding stills to your project.
After clicking File/Project Properties, you will click on the Timing Tab. There you will see how to set the default still photo duration and the initial photo placement.
You an set it as Ken Burns, Fit, or Crop. You can always change it later in the Rotate, Crop, Ken Burns tools, but if you are importing a lot, it makes sense to set the default as the one you are most likely to need.

Ken Burns, De-Interlacing, FCE, iMovie and Adobe Premiere

I've read countless articles, bought lynda training with Larry Jordan, pre-edited photos in Photoshop, done all kinds of experiments with filters and tried other movie editor packages. FCE with the Ken Burns effect is just very tricky and time consuming to make it look good.
I took a single photo that I cannot get to look good using the ken burns effect in FCE and tried it in iMovie '09 and Adobe Premiere Pro CS5. With iMovie, it simple to do this effect. In Premiere I used the same keyframe principles I learned in FCE.
I exported each of these to a Quicktime movie (self contained and I did not use Quicktime Converter) and then popped them into iDVD, burned a DVD and took it to the TV to compare. iMovie looked great. Premiere CS5 looked even better. FCE looks terrible. I tried every filter with various settings and nothing comes close to the other two.
I get that the photo doesn't have the greatest resolution, it's a jpg and has artifacts but the other two applications had no issue with it and produced great looking video. Is it me or is it FCE? BTW, using version 4.0.1.

Select your sequence (timeline).
Go to sequence settings (command-zero or choose Sequence > Settings...)
Find the Field Dominance menu, and set it to None.
You can check your video quality by setting the Canvas to 100%.
You should probably convert your images to .tiff or .png
instead of .jpg. Here's a thread that goes into some detail:
http://discussions.info.apple.com/message.jspa?messageID=9816517

How do I turn off the Ken Burns effect on iOS iMovie?

I just want to know how I can disable the Ken Burns effect on a photo in iOS iMovie as I am trying to implement and end slate into a project for YouTube but when I play it, the picture moves. Any suggestions on how I can make it so the photo dosen't move at all?
Thanks

iMovie forum for an answer from the users in there who will most likely be able to help you out faster : https://discussions.apple.com/community/ilife/imovie

Ken Burn Problem in latest iMovie

I've just updated iMovie with the Mavericks update. When I create a ken burn on a photo it plays back jerky and not smooth as per the previous version. Any ideas?
I'm on a 2013 mac mini.

Hi Hélène
Form iMovie's Menu, select "Edit > Select in iMovie > Photos". All photos in the project timeline will now be highlighted with a yellow border. Click on the Adjust button at the top right, just above the viewer. Now click on the Crop button that appears (along with other buttons/tools) below the Adjust button.
From the Crop panel that appears, click on Fit. All photos in the timeline should now remain static, that is, with no Ken Burns panning or zooming evident.
John

Ken Burns Effect Portrait Photo iMovie 08

Hello...
I'm trying to make a slideshow of photos in iMovie 08. In an older version of iMovie, I was able to apply the Ken Burns Effect on both landscape and portrait oriented photographs. In iMovie 08, the landscape photos are fine, but i'm having a problem on the portrait oriented ones. The red and green bars in the Ken Burns Effect only select a portion of the portrait oriented photos, so you only see a small section of the photo when using the effect. Please help.
Thanks,
Lauren

The Ken Burns effect in iMovie only pans over the photo pixels. And it only allows rectangles in the same aspect as the screen (landscape).
You can pad black space on the left and right in your photos using an application like Photoshop. so that the Ken Burns will pan over the entire photo
There is also a program called Automator which comes with your Mac. Automator has a "Pad Images" action which will add the black space to vertically oriented photos. With automator, you can batch any number of vertically oriented photos and pad them all at once.

Ken Burns speed up in imovie 5

Hi out there,
Is there anybody out there who doesn't suffer from the speeding up of the Ken Burns effect on photos?
And if not how are you doing it? I know about the workaround of less zooming & making it longer & then trimming it.
In reverse mode the photo will appear to jump start but is then smooth for the duration.
I'm hoping one you alchemists out there has found a "fix"
I've spent endless time on it. Yes I have other programs , but in house would be nice....
Mark

.. don't understand the logic behind nonlinear zooms..it's not logic, it's taste. have a look in some documentaries using that effect, best practice: have a look in one of Ken's own movies...- linear movements look "stiff", any "organic" (in addition: curves, rotates) behavior makes it look more "natural".-
I'm sure the next version has a tiny checkbox, "linear"... and I wish the author of the help file luck, to discribe that to an amateur....

Moire effect w/ ken burns & imovie '11?

Does the moire effect created w/ the ken burns still occur in imovie '11?
I want a CLEAR video of my family vacations to include our videos & photos. I have HD 1080p video & good quality photos. My imovies 08 always turn out w/ the moire effect & I'm tired of bad quality videos after all the effort. I never downgraded the photo sizes or gave them a gaussion effect. I gave up after spending hours on videos to have them turn out badly.
Please help.
Thanks!

You might want to look into a more professional product like Final Cut Express.
IMovie11 is aimed at the hobbyist and specialized in producing videos optimized for size like youtube,iphone and the likes. Even iDVD export produces videos with artefacts for me. I use iMovie only for facebook and youtube. Its easy for that, but only for that. ( to me at last ). FCE* for all advanced projects where quality output and/or cinematic effects matters.
*Note that the current Final Cut suite which is based around Quicktime 7 technology ( Intel Leo/Snow ) will be replaced by Apple ( as announced ) this month ( June 11 )with a whole new product, dubbed "final Cut X" to provide full Quicktime X/SnowLeo/Lion optimization.. you might want to wait a few days until you decide to spend a few hundred Dollars.
Message was edited by: Sjazbec

Exporting still photos with Ken Burns from iMovie to Keynote

I am new to the Mac and have no experience of iMovie. I am putting together a slide lecture that uses photos and graphics to promote a coffee-table book on conservation issues. The presentation will use manual advance and will be shown to public audiences on large screens. The quality of the projected image is very important so I will be using a high quality Canon projector with a resolution of 1400x1050.
Some images are of landscapes and I want to use the Ken Burns effect that is available in iPhoto and iMovie but, for some unknown reason, not in Keynote. I posted this first with the Keynote Discussion Forum and was advised to move the photos from iPhoto to iMovie, apply the Ken Burns effect in iMovie, and then export to Keynote via Quicktime. My question is, if I do this, will my Ken Burns landscapes retain the same size and quality of projected image as the rest of my Keynote presentation? My impression is that using this process I may lose quality, but I hope I'm wrong. Please advise.

Some background: Importing photos with the Ken Burns checkbox ON causes iMovie to render a video clip from the photo. That's an entirely different process than importing the photo as a "still" image. Unfortunately, Ken Burns and several other rendering routines are vulnerable to factors that sometimes cause them to fail. The disk format can cause failure, third-party software, inadequate video cards and the like. The factors often have nothing to do with iMovie itself.
The same problems can occur when rendering other kinds of clips too, such as themes and special effects. (Ken Burn gets the bad rep because it's where the problems usually occur for users.)
Some of the items you listed in your Library/QuickTime folder are third-party products. There may be others too in the other folders mentioned in the link I posted earlier, so be sure to look in those too. And in iMovie plug-in folders.
Sometimes necessary items are missing that should exist. One I've seen mentioned here occasionally is the QuartzComposer.component, which should reside in your System/Library/QuickTime folder. If it's not there that might cause the problems you see.
Installing/reinstalling the QuickTime 7.1.6 might help. I've seen reports of problems going away after that update. Repeating the update won't hurt.
Have you tried creating a new user account and running iMovie as that user? If iMovie runs okay as that user that suggests a software conflict when you are the user. Unfortunately, if the software is installed in places where it applies to all users it will cause problems for the new user too.
I'd keep trying to find some software component causing trouble for QuickTime/iMovie. It's clear some third-party components have been installed; there might be others. Perhaps stuff related to AVI?
Karl

IMovie 6, DVDSP 4, and Ken Burns

Hi,
There seems to be an issue with DVDSP drop zones and Ken Burns effects rendered in iMovie 6 (or any other pan/zoom software like Photo to Movie). Dropping a pan/zoom-rendered movie into a menu drop zone looks horrid after building the project, then viewing the VIDEO_TS folder with DVD player. Same result after burning DVD.
The drop zone video, as it pans and zooms, undulates in some areas while zooming, to the point of distraction. I cannot see this effect if the file is imported into an iDVD6 drop zone or opened in Quicktime 7. I have tried deinterlacing, blah, blah to no avail.
***? I paid $80 for iLife '06 and $500 for DVDSP and I get better results with iLife? This doesn't make any sense. Any advice appreciated.

If you getting a moire (intereference) effect this is usually associated with things like checked shirts or lots of very small detail in the footage. It probably looks fine in iMovie as it is larger so you don't see the effect but when you make it smaller in the drop zone all the small detail "bunches" together and because then the effective resolution is smaller it has less pixels to play with. Also are the photos you are using for your Kens Burns montage scanned from magazines... this would also give a moire effect as the scanner has scanned the dots that the picture is made up of.
I had a similar problem recently with a scene access menu created in After Effects. The scene in question had a great big venetian blind in the background. Looked fine as full sized footage but when reduced to a scene selection size it was "ringing" like crazy and looked horrible. The only way to get rid of it was to blur the footage slightly - as it was appearing small you didn't notice.
If your pics are from magazines etc. then you can use your scanners descreening methods to largely eliminate any dot...
Hope this helps
Steve Kirkham
PS. As Hal said welcome back Chris - and Hal is right this board does have a sense of camararderie with everyone trying to help out

KEN BURNS imovie clip timing PROBLEMS!!!

I'm having some trouble adjusting the timing for pictures that I have put the Ken Burns effect onto, in imovie. I have selected all the clips to be 4 seconds long. Then I have selected the Ken Burns clips to be 4 seconds long as well, but they either have to be RENDERED in order to change the time (and this, I've heard messes up the quality of the pic making it "jagged") OR it only allows the picture to be set at it's pre-given RANDOM lower than 4 second time.
Make sense? PLEASE HELP! I'm about sick of imovie with all the problems I've had.
Thanks!

Then I have selected the Ken Burns
clips to be 4 seconds long as well, but they either
have to be RENDERED in order to change the time (and
this, I've heard messes up the quality of the pic
making it "jagged")
You may have misunderstood something important, Smiley, so I want to correct it. Ken Burns does NOT add jaggies to images. It actually INOCULATES the image from getting jaggies later.
The jaggies are added when you press the Create iDVD Project button (in the iDVD tab). That's when iMovie offers to render any unrendered photos -- convert them to video clips. If you grant permission to render, the jaggies get added to those clips.
Ken Burns renders images beautifully. The rendering routine iMovie uses later adds the jaggies.
OR it only allows the picture to
be set at it's pre-given RANDOM lower than 4 second
time.
The user interface for configuring Ken Burns settings is confusing and sometimes buggy. Until you figure it out, it sometimes appears to have a mind of its own. For what it's worth, I've never seen KB apply random durations to a group of images, and it's not a complaint we see here. So my guess is you're doing something inconsistent with how the Ken Burns user interface likes to do things, or you've bumped up against a bug.
One bug is that the text boxes in Ken Burns are quite unreliable. It's best to use the sliders to set the duration and zooms instead of the text boxes. The duration slider is more reliable than your typing the duration in the text box at the end of the slider, for example. If you use the text box, remember to hit the tab key after entering the text. And, of course, be sure to use the sec:frame format, e.g. 4:00 or 4:22. If you type the numbers differently, iMovie will probably do something unexpected.
One of the interface anomalies occurs when the Ken Burns checkbox is on when you select a photo in the iPhoto list.Then Ken Burns does a preview dance in its little thumbnail image, with animation. As that animation runs, changing any Ken Burns settings will almost certainly fail. You will probably accidentally set a feature you didn't intend.
Here's why: As the animation progresses, Ken Burns switches from the Start position to the End position. If you click on a photo in the list, then reach up to set the Start position, you'll probably unintentionally set the End position. So always wait for the preview to finish before setting anything.
Another confusing (but useful) feature is that Ken Burns always applies the features of your last-clicked-on Ken Burns clip to the upcoming import. So if you pre-set your Ken Burns features, THEN click on a previously-imported Ken Burns clip, the Ken burns settings will change from YOUR settings to the settings for that clip. (That's immensely useful, for it lets us apply the settings of a clip we like to one or more photos we want to import, but it can be very confusing.) So if you have manually configured some settings for the next import, do NOT click on a clip before importing that image.
Another bug: if the Ken Burns checkbox was OFF when a photo was imported, clicking on that clip does NOT correctly re-display the settings for that clip. Ken Burns doesn't correctly show the pan or zoom. If you Update the clip with a new duration, the pan and zoom of the new clip won't be correctly applied.
I don't know if any of that helps you figure out what's going on there, but hopefully so. If not, describe EXACTLY the steps that cause the problem to occur so others can test it.
Karl

"Ken Burns" imovie 06 project opened in FCE 4

Opening an iMovie 06 project in FCE 4 works great, except I'm confused about still photos to which I had added the Ken Burns affect to in iMovie. In FCE they still move as expected when just viewing the timeline, but when I open up Motion tab for an image in the Viewer, there is no Scaling or Centering listed. I thought maybe FCE converts photos to movies to maintain the effect, but they are still just JPGs.
How are these images moving, if there is nothing changed in the Motion tab!?
I'm hoping to make some quick Ken Burns effect slideshow in iMovie and then do more editing in FCE...
Thanks!

I have no chance to test it now on my Mac, but it seems strange to me that FCE can convert Ken Burn effects from an iMovie project into FCE Motion keyframes. FCE more likely imports an already rendered motion clip from iMovie. Probably it also imports the original JPGs, but the clip you are viewing in the timeline is more likely a clip where the original Ken Burn Effect cannot be modified.
In any case you can do a simple test: create a test iMovie project with a single image, apply the KB effect to that image, import that project into a new test FCE project: it's then easy to check what is and what is not imported.
Piero

Video Slideshow Creation in iMovie (Ken Burns Effect)

I'm trying to create a slideshow video in iMovie. The process seemed pretty straight forward, and seemed to be going nicely. I got all the images imported into iMovie and added the music to the timeline as I wanted. When I previewed my results though, I was less than pleased.
After viewing the preview, the Ken Burns effect was the exact same zoom/pan for every picture--it wasn't randomizing the effect like it does when you do a slideshow from within iPhoto or Front Row. Any way to get it to randomize the effect? There's just way to many pictures in this compilation (250+) to go through and change it up a bit for each.
At this point, I figured I'd just go with the slideshow export feature in iPhoto since it does randomize the Burns effect. Yeah, that didn't go so hot either. Apparently, you can only add one music track, so I had to find a utility to combine the MP3s we were going to be using. Looked like this was going to work until we played it after the (LONG!) export process. Turns out, the slideshow somehow ended up a whole four minutes shorter than what I had in iMovie. Apparently the default transition speed of 5 seconds does not hold true to iPhoto slideshows. Plus, much to my surprise there is absolutely no fade-out in the music at the end--it just abrubtly stops. Not cool.
There's got to be a way to make that (very cool) Ken Burns effect randomize in iMovies I'd think. Any suggestions?

Although you cannot permanently remove the Ken Burns effect option, you can set your default to having it off.
You need to apply your settings to a particular photo and then the changes should be the new default.
Drag any photo into the timeline. Select 'show photo settings' and deselect KB effect and update that photo.
Close or hide photo settings. Click on something else. If you don't want the photo in your timeline, delete it.
When you open the 'show photo settings' again, your recent changes should be there.
If this process does not work for you, try deleting iMovie's preference file.
With iMovie closed, go to your Home file(YourUserName)/Library/Preferences/com.apple.imovie.plist
Drag this plist file to the trash. iMovie will create a new one when you reopen it.
Reopen iMovie.

Ken Burns effect

Under Snow Leopard 10.6.8 I am using iMovie '11 version 9.0.4 (1634).
Making for the first time a movie out of iPhoto pictures, with lots of effects (transitions, titles, etc.), I experience in the use of the Ken Burns effect that any zooming ('in' as well as 'out'), or panning, constantly generates a kind of 'moiré' artifact: stones, leaves, steps, rooftiles and in general anything that is rather detailed, start to twinkle and flicker. The duration of those scenes varies between 1.14 and 4.00. On extreme shortcuts, this effect is - as seems obvious - rather not seen.
As the use of the Ken Burns effect in my iMovie project is essential, I love to know how to avoid that detoriation. In iMovie itself it is not too ennoying on my 27" iMac monitor. But on TV, with the DVD burned (iDVD version 7.1.2 - 1158), it is really desastrous to watch...
Is upgrading from iMovie to Final Cut a solution?
Thanks for any help.

The only other thing you can try is to look at your workflow from iMovie to iDVD. There are two possible paths:
1. Share > Share to iDVD
2. Share > Share to Media Browser
For highest quality the second option is the best. It uses a completely different mechanism than option 1. Believe it or not Option 1 actually transcodes to MPEG 2 directly into the iDVD project. Whereas option 2 converts to H.264 then gets transcoded within iDVD itself.
Which way did you get your video into iDVD originally? I don't know if changing the path into iDVD will have any effect on your moiré artifacts.

Ken Burns Effect Pollutes Everything

If you're putting together a slideshow, do not turn on the KB Effect for anything. Ever. I hate to say this, for I love this feature. It has enhanced many of my slides. However, it's a sorcerer's apprentice.
It causes nightmares once it's in your timeline. You can't update its durations, unless you delete the slide & start all over. I've found, oddly, that if a transition is connected, and you try to reduce the duration of the slide, after the transition is rendered, the slide, instead of having reduced duration, is actually increased by the amount of the reduction you wanted!
Beware of using KBE for any photo in your iPhoto imported album. Once you invoke KBE on any photo, it pollutes every photo you click on, thereafter, whether you turn it off or not. Karl Petersen posted a message last month, praising this polluting feature of KBE:
"The most important is that all of the Ken Burns settings, the KB checkbox, zoom, pan and duration are controlled by the LAST imported clip you made, or a previously-imported clip you clicked on. THAT's what sets the default setting for your next import(s). (A very nice feature, by the way, for it lets you apply the Ken Burns settings of one clip to the next photos you import. You don't have to reconfigure settings each time.)"
First, it's boring to an audience to have repetitious effects. Second, I don't know what he means by "import." iM4, in moving a photo from the Pane to the Viewer (timeline), says it's importing it, but I already imported it from iPhoto4. Third, I'm not so lazy as to resent having to reconfigure individual photos, if it means I have control over what I want to reconfigure & what I don't want to reconfigure.
Third, I wish Apple would realize users do have a brain: They don't need everything automated. There should be two buttons: KBE on for all, another KBE off for all. KBE off would allow the user to select which photos KBE is confined to. One thing I like about Microsoft is, it doesn't assume anything about the user. The user has choice & is always in control.
I'm really at the point of not invoking KBE for anything, anymore. It's causing too much frustration, & it's not worth the time trying to figure it out, especially once the photo is in the timeline.
BTW, what's the relationship between the Monitor, the Timeline, & the window in the upper right corner of the Photo Pane?

The conclusions you've reached about the Ken Burns Effect are so strange it makes me wonder if you've understood how it works. Unlike the Ken Burns Effect in iPhoto — which adds the effect on-the-fly as a sequence of photos is played — the Ken Burns Effect in iMovie affects how the photo is imported and rendered. iMovie renders video — creates a movie clip — based on your Ken Burns settings.
Remember, iMovie is all about creating video clips that play as part of a movie. iPhoto, on the other hand, has no movie. It simply displays a series of images. It never creates a movie until we export the slideshow to a QuickTime movie.
Changing the Ken Burns settings of a photo in iPhoto simply changes how that image is played in the iPhoto slideshow. Changing the Ken Burns settings of an iMovie clip, on the other hand, changes how it is (immediately) rendered into a new video clip.
You can't update its durations, unless you delete the slide & start all over
Of course you can change a duration. Click on the rendered clip in the Timeline, change the duration, and Update the clip.
Of course, if you've edited a previously-rendered clip — added a title or transition, for example — then it is no longer a KB clip. But if you remove the title or transition you can update the KB settings normally.
First, it's boring to an audience to have repetitious effects.
I never suggested you use the same KB effect on all your clips. I suggested that if you want to avoid having to reconfigure your Ken Burns settings before importing a photo, first click on a clip that already uses those KB settings. This saves time and considerable aggravation. I find this especially useful because the KB settings window is so clumsy (and buggy).
Second, I don't know what he means by "import." iM
Each time you add a photo from the iPhoto list to your iMovie project it is imported to the project. iMovie adds the photo to the project, then renders the video clip, if needed. (The imported photo is retained so you can Update the clip later, if you want.)
Third, I'm not so lazy as to resent having to reconfigure individual photos, if it means I have control over what I want to reconfigure & what I don't want to reconfigure.
Fine, iMovie lets you do that. There's nothing preventing you from configuring new Ken Burns settings for each photo. (My suggestion was to avoid having to do that unnecessarily.)
Third, I wish Apple would realize users do have a brain:
Apple DOES assume we have brains. And that we use them to learn how the program actually works, and why.
There should be two buttons: KBE on for all, another KBE off for all. KBE off would allow the user to select which photos KBE is confined to.
It's that point which makes me wonder if you've misunderstood something important. The Ken Burns settings we apply in iMovie do NOT control how the movie PLAYS in iMovie, at least not directly, like it does in iPhoto (and other slideshow software). The KB settings control how a clip is RENDERED when the photo is imported to iMovie. Once rendered, that clip is FIXED unless we re-render (Update) it. Changing its Ken Burns settings changes the clip ONLY if we re-render the clip.
Another way to think about it is that the Ken Burns Effect affects how a photo is imported. Once imported, it does not affect how it plays.
Once you invoke KBE on any photo, it pollutes every photo you click on, thereafter, whether you turn it off or not
There's no pollution of anything. For the reasons I mentioned earlier, the settings do NOT change anything about existing photos or clips until you Apply those settings, which (usually) causes iMovie to re-render the clip.
Try to re-think how Ken Burns works, where you assume iMovie is creating video, not just a series of images it plays in sequence. Those are two very different things.
Karl

Ken-Burns-Effekt abstellen in iMovie '11

Similar Messages

Maybe you are looking for