Ken Burns with Fade in Fade out Dissolve

I have about 300 pictures and want to add kens burns and fade in fade out dissolve to all at once then go one by one and adjust.
I figured out how to do copy paste attriubutes to all pics for Ken Burns, BUT not sure if there is a simple way to add Fade in Fade out Dissolve btn each of them to avoid doing 300x
Thanks much
drgwtv

OK I'll bite... Who is this Ken Burns?
There's a couple of ways to go about adding your transitions. I think is the easiest.
Make sure the favorite transition and length you want it are set in your effects tab. Select all of your clips in the timeline and drag them up to the canvas holding down the mouse. Several options should display and I believe the one you want is overwright with favorite transition. Its been a while since I've done but give it a try and post back if I'm wrong.
For bonus points-
Another way to quickly add your favorite transition is to use the arrow key or mouse to position the cursor at the edit point and press Apple+T

Similar Messages

Fade in Fade out dissolve automatically added to every cut

After two months I finally finished editing a movie. Exported and burned it to a dvd and saved the most final version. Came back two days later to do a bit more work and while working on it, and perhaps I accidently hit something, but the timeline did something funky I had never seen. It added what looked like ghost lines that I couldn't figure out how to remove. Shut things down and went back to it a day later only to find that every cut had a fade in fade out dissolve added. I tried going back to earlier saved versions but they turned out to all require a lot of work to get me to the final version. Seemed easier to just go back and delete and change the fade out fade in transitions.
Anyone know what happened?

Yes. If I have a timeline with clips on it:
and I select them all (by using, in the case Command + A):
Then install a dissolve by typing Command + T, it gets applied to all the cut points:
MtD

Is it possible to burn a playlist to a CD with fade-outs & fade-ins?

I can burn a playlist to a CD with start time and end time edits and I can regulate the number of seonds between tracks. But when I try to burn a CD that has been set to cross fade, the burn process ignores the fade out and fade in and just burns the songs at regular volume from start to finish. I unselected the automatic sound check feature, but that didn't solve the problem.

jhcm4202 wrote:
I can burn a playlist to a CD with start time and end time edits and I can regulate the number of seonds between tracks. But when I try to burn a CD that has been set to cross fade, the burn process ignores the fade out and fade in and just burns the songs at regular volume from start to finish. I unselected the automatic sound check feature, but that didn't solve the problem.
The Crossfade effect only applies to playback in iTunes. It does not carry over to audio CDs burned using iTunes nor iPod transfers.
My guess is you will need to doctor the individual audio files first with a third-party utility before burning these new tracks to a CD.
Steve

How to lenghten the clip with fade out

I have a clip on the secondary storyline wich ends with a fade out. I'd like to lenghten the clip maintaining its fade out as it is. Is there a quick way to do it without having to cut and paste the fade out?

Actually something strange happens here. I move the clip backward (after having selected clip and dissolves) and I get that the clip is moved, but the dissolves remain where they were.....) :

Image swaps with fade out and in

I am new to Dreamweaver, in fact only got into it to do my
own website. I want to create image swaps with a fade out and then
fade in with the new image. Nowhere can I find out how to do this
so far. Can anybody point me in the right direction. Many thanks
for your help now and in the past.
Perspectivist

This is a multi-part message in MIME format.
--------------000605070301090808040601
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!
Nancy O wrote:
> There are several image transition scripts on this page:
>
http://www.brothercake.com/site/resources/scripts/transitions/
>
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
> "Perspectivist" <[email protected]>
wrote in message
> news:[email protected]...
>
>> I am new to Dreamweaver, in fact only got into it to
do my own website. I
>>
> want
>
>> to create image swaps with a fade out and then fade
in with the new image.
>> Nowhere can I find out how to do this so far. Can
anybody point me in the
>> right direction. Many thanks for your help now and
in the past.
>>
>> Perspectivist
>>
>>
>
>
>
--------------000605070301090808040601
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!<br>
<br>
Nancy O wrote:
<blockquote cite="mid:[email protected]"
type="cite">
<pre wrap="">There are several image transition
scripts on this page:
<a class="moz-txt-link-freetext" href="
http://www.brothercake.com/site/resources/scripts/transitions/">http://www.brothercake.com /site/resources/scripts/transitions/</a>
--Nancy O.
Alt-Web Design & Publishing
<a class="moz-txt-link-abbreviated" href="
http://www.alt-web.com">www.alt-web.com</a>
"Perspectivist" <a class="moz-txt-link-rfc2396E"
href="mailto:[email protected]"><[email protected]></a>
wrote in message
<a class="moz-txt-link-freetext"
href="news:[email protected]">news:[email protected]</a >...
</pre>
<blockquote type="cite">
<pre wrap="">I am new to Dreamweaver, in fact only got
into it to do my own website. I
</pre>
</blockquote>
<pre wrap="">want
</pre>
<blockquote type="cite">
<pre wrap="">to create image swaps with a fade out and
then fade in with the new image.
Nowhere can I find out how to do this so far. Can anybody
point me in the
right direction. Many thanks for your help now and in the
past.
Perspectivist
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
</body>
</html>
--------------000605070301090808040601--

Problem with 'Fade Out'

As part of an edit, I am trying to both 'Fade In' and 'Fade Out' of a particular video. The 'Fade In' works fine, but I'm having problems with the 'Fade Out'. For some strange reason, while the video part of it fades out properly, the audio that also fades out is not the correct audio - it is audio from earlier in the video (I'm assuming that - it is a live music video - the part that is fading out is crowd response, but the audio somehow has music in it)
This is my first time using iMovie '08 - I have used past versions of iMovie over the last few years and have NEVER had this problem. Any suggestions or known fixes? Any feedback much appreciated.

still confused. I don't get a yellow band when I select a clip - it just kinda gets highlighted.
Also - when I go to audio FX in the editing field, it really has nothing to do with selecting audio - just a bunch of equalizer options. Not really sure why a basic fade out wouldn't control both the video as well as audio of the clip. It always did in previous versions of iMovie.

Problems with fade out

i'm trying to do a fade out at the end of rather long audio file, about 20 minutes, and the fade out function will not work. it works at the beginning of the track, i can click, create the little ball-points and drag them up and down as i please, but at the end, i create a ball point, then go to create another one to bring the fade down, and the first ball i created vanishes. i even tried creating a new music track separate from the one i created for the fade in, and same result. fade out doesn't work after about 3/4 of the way through the track. any suggestions?

The zoom setting deal.. it's the circle button right? With the L and R on it.. I tried moving it to L to zoom out but it doesn't change a thing. I was so proud of myself for finally learning how to fade in and out today.. but now this won't work. It's weird, once it passes like 520 or so, the ball disappears and the fading stops working (past that point).

Problems with fade outs - audio

Hi
I have a problem that's driving me crazy. Whenever I add a fade out transition at the end of a clip, a random piece of audio from earlier in the clip appears at full volume alongside the fade. Is this a bug and does anyone know a way round it? iMovie 5 never used to do this.
Any help greatly appreciated.
Thanks
Ian

I had a similar issue just on the weekend. But, it wan't just the "fade out transition". Other transitions were affected by this same "bug".
I decided to fade out the audio first before applying the "fade out transition". This is not the solution which I wanted personally, but it did the trick. No random piece of audio.
I do agree that a real solution to the issue would be excellent! Hopefully, tech support at Apple will have something for afrocelt1121.
Good Luck!
Rodger

Help! ken burns/ old zoom in zoom out option

Hey any help is appreciated. I'm making a picture slideshow in imovie '09 and I'm not completely thrilled with having it fit to screen or the ken burns affect. Is there anyway to add a slight zoom in/ slight zoom out to the picture like there was in the old imovie? Please let me know any advice if you can i have to finish this movie by tomorrow! Thank you!

You don't say if you are editing standard definition DV-NTSC or HD, but I guess you are talking SD - both for your sequence setting and your TV set.
Some comments:
- any picture of any resolution will be converted to the sequence resolution (720x480 in DV-NTSC) when you edit the picture to the timeline. This means that quality will necessarily degrade; this cannot be avoided, but this is true also for iMovie. Motion bu itself should not further degrade quality.
- it's important how you export your movie for iDVD: use Export/QuickTime Movie (not Using QuickTime Conversion).
- as Ian suggests you may try de-interlace filter or the blur filter
- I suggest you to watch the movie on your TV set during editing: connect the TV to your Mac firewire port: use a D/A converter (bridge) converting firewire connection to analog connection; you may use also a camcorder with pass-through. This allows you to check the movie quality as it will appear when watching the DVD: most important for stills and color corrections.
Note that the still in the viewer, before editing to the timeline, has the quality of the original still before its conversion to the sequence settings; so this is not meaningful.
Piero
Message was edited by: PieroF

Why does "ken burns" increase speed going in/out?

If you've used Flash, you know that you can control the motion by 'easing in/out', that is, the constant and consistent motion of a picture or object can be emphasized at the start or end of a tween (move slow and increases in motion speed towards the end, or vise versa).
the ken burns effect shows a normal smooth motion, maintaining consistent speed throughout the whole motion, ONLY in the preview pane. When it is actually rendered, for some reason some photos start their motion really slow. Others start their motion really fast. Why is this and can it be controlled?

Welcome to the forum, Chris.
Yes, the accelerating zoom of Ken Burns is a known problem. Here's another thread discussing it, with some suggestions. Unfortunately, there is no perfect workaround.
Karl Petersen, "jumpy ken burns effect" #1, 11:59pm Sep 17, 2005 CDT
Please complain to Apple so it is fixed.
http://www.apple.com/feedback/imovie.html
Karl

Ken Burns with Keynote

I have put together a 50 minute educational slide show in Keynote that uses a mixture of digital photos and charts with manual advance. Some of the photos are of landscapes and I would like to be able to use the Ken Burns effect with these images. I can do what I want with these images in iPhoto but not apparently in Keynote. Does anyone know of a reliable way of importing into Keynote a mini slideshow of about 20 photos each incorporating the Ken Burns effect? Many thanks.

Many thanks Kurt for your quick reply. The purpose of my slide show is to promote a coffee-table book on conservation photography. The show will be presented to public audiences on large screens using a high quality Canon projector with a resolution of 1400x1050. I have no previous experience with iMovie. Will importing certain images (mostly landscapes) into iMovie, applying the Ken Burns effect and then exporting them to Keynote via Quicktime, maintain in those images the same size and quality of projected image as the rest of my Keynote presentation? My impression is I will lose quality, but I hope I'm wrong.

Photocopying only part of page with fade out of center of page

My printer prints from the computer but does not print out well when photocopying. I get the sides of the page for the most part, but the center of the page fades to blank. I also can't print out a full alignment page (I changed the ink cartridges). Only the blue/green prints, no black markings for alignment.
It seems to be more of a problem with the black print/images. I was able to print a page from computer, but the ink looks more blue than black. Overall, even the colored printed part was somewhat faded. The edges of the page were outlined on the printed page in a combination of blue/pinkish gray. Another page, the black print on the page photocopied/printed as pink. It seems more of a problem with copying the upper middle part of the image, but it might be inconsistent.

Hello @ajewel , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having issues with your print output. I'd like to help!
I'd recommend removing the ink cartridges, and perform a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fixing Print Quality Problems for the HP Photosmart Premium TouchSmart Web C309n All-in-One Printer ....
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Stuttering Fade In Fade Out Dissolve

All,
I'm trying to cross fade two clips together and my fades are stuttering. They don't look smooth at all. I don't know why, but they were looking good before and now this.
I've read that effects are not as smooth in Final Cut as they are on DVD. That's fine, but like I said my fades were looking so much smoother before.
Any clues?
Trey

have you tried trashing all of your render files and starting over? Sometimes they can get corrupted or render on top of each other and end up creating a render that looks horrible.

How make cookie cutter with fade-out to white surround - a vignette?

I have been given a wedding picture and my client wants a soft white vignette, the picture fading to white all round. I have the Cookie Cutter but can see no way of changing the hard edge to a vignette.

Okay lets start over:
1. Drag the locked background layer (drag the layer in the layers panel)
    down to the new layer icon at the bottom of the layers panel.
    This duplicates the background layer.
2. Make the background layer active (click on the bottom layer in the layers panel).
3. Go to the bottom of the layers panel, click on the new fill or adjustment layer icon
    and select Solid Color from the drop down menu. When color picker appears, select
    white as the color and click ok.
    (you can change the color later by double clicking on the fill layer icon in the layers
     and choosing a new color)
4. Make the top layer in the layers panel active by clicking on the top layer in the layers panel.
5. Select the cookie cutter tool, choose the shape, set the feather, uncheck the crop box and
   draw out the shape on the image.
The amount of feather depends on how large your image is, so you might have to try a few different settings.
MTSTUNER

FCP, won't allow fade in/fade out dissolve between clips?

I'm trying to add this dissolve between two clips. When I drag the dissolve over to the timeline, the dissolve covers one clip but not the other? There is not a frame space between them.
Thanks in advance.

While we all have MacBooks in this forum not all of us use FCP. There's a FCP Support Community where everybody uses FCP. You should also post this question there.
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Ken Burns with Fade in Fade out Dissolve

Similar Messages

Maybe you are looking for