KEPM deletion package doesn't work as expected - duplicate entries in COPA

hello,
I have used KEPM TCODE to delete entries in COPA version and what we have experienced is that it doesn't delete data for a particular company code which led to duplicates.
Does anyone know the reason and how I can delete duplicate entries.
Thanks,
Bhat

Hi Vaidya,
KEPM does not physically delete data from CE2XXXX table. It passes a opposite entry to nullify the effect.
If you are unable to delete it, i request you to give screen shots of Planning Level, Planning Package.
Best Regards
Surya

Similar Messages

TS2771 What should I do about the backspace key/delete button doesn't work?

The backspace/delete key doesn't work on my son's ipod touch. What can I do?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Removing files from nano 6th gen: right clicking on selected file will not reveal a delete option, only play, get info, rate. Highlighted and hitting delete key doesn't work.

Trouble removing files from 6th gen ipod nano: right clicking on selected file will not reveal a delete option, only play, get info, and rate. Highlighting the file and hitting delete key doesn't work. Have run diagnostics and rebooted nano to no avail. This is my second 6th gen nano; this prob never occured with it. Will greatly appreciate any help.

Doink! I didn't realize it wasn't checked. Works perfectly now. Thank you for post!!

ArrayDeque as a stack doesn't work as expected with complex objects

Trying to use ArrayDeque as a strorage for complex values <PSList<PSol>> (i.e. Arraylists of structured Values PSol), this doesn't work as expected. The code below should produce different values of pSLWk, being stored on bkStack, which are then to be retrieved by pop() to the variables pSL1, pSL2, pSL3.
However, retrieval only ends up with three identical data sets (variables) pS1,pS2, pS3.
        public PSList<PSol> pSL;
        private ArrayDeque<PSList<PSol>> bkStack=new ArrayDeque<PSList<PSol>>();
        pSLWk=new PSList<PSol>();       // Constructor copies some Array (static field) to the PSLists
        pSL=new PSList<PSol>();
        pSLAux=new PSList<PSol>(pSLWk);   // Constructor copies from existing PSList
        pSLWk.checkResult("pSLWk prior to setDefaults - modifies pSLWk !");
        setDefaults();                                                            // Modifies pSLWk only
        pSLWk.checkResult(" pSLWk after setDefaults");              // .. got changes (o.k.)
        pSL.checkResult(" pSL after setDefaults");                  // .. unchanged (o.k.)
        pSL.checkResult(" pSLAux after setDefaults");               // .. unchanged (o.k.)
        bkStack.push(new PSList<PSol>(pSLWk));                      // store changes in bkStack
        pSLWk.getEl(77).setVal(new StringBuffer("4"));              // change pSLWk again (value 4 @ 77)
        pSLWk.checkResult("pSLWk, after PUSH, THEN modify 4@77");   // .. got change (o.k.)
        pSL.checkResult("pSL after setVal 77");
        bkStack.push(pSLWk);                      // store changes in bkStack
        pSLWk.getEl(80).setVal(new StringBuffer("8"));              // change pSLWk again (value 8 @ 80)
        pSLWk.checkResult("pSLWk after setVal 8@80");               // .. got change (o.k.)
        pSL.checkResult("pSL after setVal 80");
        bkStack.push(new PSList<PSol>(pSLWk));                      // store changes in bkStack
        pSL1=new PSList<PSol>(bkStack.pop());
        pSL1.checkResult("pSL1 after 1st pop");
//      pSL1=bkStack.pop()                                          // Straightforward way doesn't work either...
        pSL2=new PSList<PSol>(bkStack.pop());
        pSL2.checkResult("pSL2 after 2nd pop");
        pSL3=new PSList<PSol>(bkStack.pop());
        pSL3.checkResult("pSL3 after 3rd pSLWk=..pop()");Here the result from the code above:
debug:
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSLWk prior to setDefaults - modifies pSLWk !
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2   63 <C.R.> pSLWk after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSL after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSLAux after setDefaults
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 463 <C.R.>pSLWk, after PUSH, THEN modify 4@77
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 77
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSLWk after setVal 8@80
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 80
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL1 after 1st pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL2 after 2nd pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL3 after 3rd pSLWk=..pop()
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSLWk prior to setDefaults - modifies pSLWk !
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2   63 <C.R.> pSLWk after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSL after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSLAux after setDefaults
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 463 <C.R.>pSLWk, after PUSH, THEN modify 4@77
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 77
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSLWk after setVal 8@80
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 80
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL1 after 1st pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL2 after 2nd pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL3 after 3rd pSLWk=..pop()What's the problem with this ?
Rem: I tried the simple approach as well:
bkstack.push(pSLWk);
...

Thank you for your comments, although I see we still don't have a common understanding of the problem.
Firstly, I add the code for the PSList and the PSol classes, so you might find some problem with that:
     public class PSol     {
          private StringBuffer val;
          private int zI;
          private int sI;
          private int bI;
                    // == Konstruktor
          public PSol( StringBuffer v, int z, int s, int b )     {
               this.val=v;
               this.zI=z;
               this.sI=s;
               this.bI=b;
                    // == Getter,Setter
          public StringBuffer getVal()     {return val;}
          public int getZ()     {return zI;}
          public int getS()     {return sI;}
          public int getB()     {return bI;}
          public int getVSize()     {return val.length();}
          public void setVal(StringBuffer v)     {val=v;}
          public boolean hasVChar( StringBuffer ch, boolean delCh )     {
               boolean bT=false;
               StringBuffer fSt=getVal();
               if (!(fSt.indexOf( ch.toString() )     == -1))     {
                    bT=true;
                    if (delCh)     {
                         setVal(fSt.deleteCharAt(fSt.indexOf( ch.toString() )));
               return bT;
     }     // PSol
     public class PSList<E> extends ArrayList<PSol>     {
               /**     Construktor 1: PSList(v,z,s,b) - makes list from single arrays
          private static final long serialVersionUID = 4711L;                         // ### JAVAC Warning! ###
        public PSList (String[] vS, int[] z, int[] s, int[] b) {
               StringBuffer[] v=new StringBuffer[valDim];
            for (int i=0;i<valDim;i++) {
                v=new StringBuffer(vS[i]);
//ArrayList<PSol> pSL=new ArrayList<PSol>;
               for (int i=0; i<valDim; i++) {
                    this.add( new PSol( v[i], z[i], s[i], b[i] ) );
/** Konstruktor2 : makes list from matrix array
public PSList () {
for (int j=0; j<nDim; j++) {
for (int i=0; i<nDim; i++) {
this.add( new PSol( new StringBuffer(sGuiArr[i][j]), i, j , i/locDim + (j/locDim)*locDim) );
                    /**     ------- Construktor 3 : PSList(PSList pS) - makes list as a copy of an existing one
public PSList ( PSList<PSol> pX )     {
               super (pX); // ArrayList-Constructor (Collection)
// get Element <PSol>
public PSol getEl ( int i )     {return get(i);}
     public int getCount()     {return size();}
     public int getTValLg()     {
               int lg=0;
               for (int i=0; i<getCount(); i++)     {
                    lg=lg + getEl(i).getVal().length();
               return lg;
                    /**     ------- checkResult()     -     Check if alll elements are single char +dump
     public boolean checkResult(String messg)     {
               boolean allOne=true;
               for (int i=0; i<size(); i++)     {
                    if ( getEl(i).getVal().length() > 1 )     {
                         allOne=false;
                         System.out.print(" ");
               else     {
                    System.out.print(getEl(i).getVal());
               System.out.println("<C.R.>"+messg);
               return allOne;
     }     // Class PSList
Secondly, I don't really see what you mean by pointing out to 'only one "pSLWk" instance of PSList'. The variable pSLWk is the variable to be worked upon; after some change of the contents, I want to save this state of contents to the stack. When I pop that variable from the stack, I wouldn't want to restore it to pSLWK, but to some other variable, e.g. by public PSList<PSol> pSL1;
pSL1=new PSList<PSol>(bkStack.pop());Again - to my understanding (which comes from old days of microprocessor coding... - there shouldn't be a need to know how the data came there, or what was the name of the variable who stored it there. And : the implementation of ArrayDeque returns 'elements' of class E, not references !
Thirdly, you're right, that the method of using a copy constructor for retrieval looks 'weird'. However - I had some other versions that didn't work either, e.g. the straightforward one, as I pointed out.
And fourthly: yes, I'm almost sure that I'm messing up something somewhere. I went to this forum hoping to clarify that ... :)
If you don't mind, could you please sketch a few lines of code, how to 'push' a complex variable to a ArrayDeque stack, and retrieve it - by 'pop()' - to some to other variable of the same class later ?
Might make our discussion much easier, to see how things REALLY work.
Thank you !

VoiceOver navigation buttons doesn't work as expected on latest version of Firefox

VoiceOver navigation buttons doesn't work as expected on latest version of Firefox. VO+Left/Right not jump from element to element
Version of OS: OS X Yosemite 10.10.1
Version of Chrome: 42.0.2311.90 (64-bit)
Version of Firefox: 37.0.2

Did this work in a previous version of Firefox?
There is an open bug to improve accessibility on OS X. (Bug 336306) I'll update that bug with any relevant information you provide here.

Changed AppleID doesn't work as expected - System shows old AppleID

A friend of mine switched her AppleID in their OS X system. E.g. she changed the respective preference panel.
Unfortunately, the switch didn't work as expected: If she tries to download application updates in AppStores, the system allways presents the old AppleID. Additionally, she isn't aple to change the AppleID value in the respective dialogs.
Since she changed all places she is aware of, the system effectively prevents all updates since a far too long time now...
Questions
Did someone know how to effectively change the AppleID system-wide?
Should she delete a certain *.plist file?

The actual email address doesn't matter. Once it is created as an AppleID, it is just a text string that is used as the username for iCloud, iTunes Store, Mac App Store, etc. It does get used as a contact email, but you can associate any number of email addresses with that AppleID. The password used for the AppleID should be different than the email address, but could be the same if you choose. Regardless, there is really no link between an email account and the AppleID, besides the same text string is used.
As I stated earlier, AppleIDs cannot be merged or transferred and the purchases on one AppleID cannot be transferred to another. Whatever AppleID was used to purchase the items has to be used to update them or reinstall the OS.
It doesn't matter that she created a new AppleID. The purchases on the old ID cannot be transferred to the new AppleID. The old email address (which isn't an email address but a username for the AppleID) pops up because that is the AppleID that was used to purchase the OS. Nobody can change that, unless Apple decides to change its position, which I doubt it will due to security concerns.

Connecting to other computers on network doesn't work as expected.

This is kind of interesting.
I do this: From Menu Go > Network
Then I choose either my iMac or MacBook Pro and double click the user name for my home folders on the other computers.
A window opens up and the bottom right of the window the little twirling busy thing just goes and goes and goes.
I notice the server icon on the Desktop and double click it and everything is there an access is fast, just like I expected from the first window that popped up. But it's still there, blank, with a little twirly thing (very technical).
I get what I'm after, but it doesn't work the way it should.

Try keeping your shares from sleeping during the expected period of use--assuming they are. If this procedure works, then you'll need to decide between the "lesser of the two evils."

Delete Button doesn't work

I have 2 accounts in my Inbox. When the Inbox is highlighted in the Source list ( as opposed to highlighting one of the 2 .Mac accounts) the Delete button works fine when highlighting a message that will be moved to the Trash. However, when an individual account is highlighted and I want to move a messsage to the Trash, the Delete button won't work. Any thoughts ?

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Table delete button doesn't work with Virtual Forms

I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
getTableRowGroup1().getSelectedRowsCount()==0
and getTableRowGroup1().getSelectedRowKeys().length==0.
I tried almost everything with the forms... I don't know what I missed...

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

XML Error Handling doesn't work as expected

Hi there,
we are doing some syncronization szenarios between CRM 5.0 and a legacy system via XI.
One szenario is an asynchronous XML syncronisation. As there are database locks the messages are errornous and turn to system failure - restartable (red flag). To be seen in SXMB_MONI.
Regarding to weblog /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically I configuered the CRM middleware with IS_Retry and also scheduled a job for report RSXMB_RESTART_MESSAGES.
That worked fine until yesterday our synchronous XML szenario dumped and produced errornous messages type system failure - not restartable (red dot). Since then the IS_Restart doesn't work anymore.
I've no idea how to handle theese messages. It seems they are preventing IS_Retry from working. If there are red flagged messages I can process them manually or with report RSXMB_RESTART_MESSAGES. But they are not automatically re-processed via IS_Retry.
I also checked the queues and they look fine in smq2. There are no stucked queues.
Does anyone have any idea what is going wrong and how I can fix this issue? I could schedule the report to work more than once a day as it is at the moment (night job), but IS_Retry option would be the better szenario.
Thanks a lot in advance.
kind regards
Michael

Hello Suraj,
the error log in SXI_MONITOR tells me that the sender/receiver realtion couldn't be found, due to XI had a downtime.
On Audit log from Message Monitoring on adapter engine I don't have permission, as I am working only on the CRM.
But i was able to deal with the errornous XML. The deletion job in sxmb_adm (rsmb_delete_messages) with the parameter PERSIST_DURATION_ERROR with Subparameter SYNC Value 1 has removed them from the system.
According to forum deletion of unprocessed xml messages
But I still don't know why IS_Retry doesn't work anymore.
Kind regards
Michael

Finder 'Back' button doesn't work as expected

Try this in Leopard Finder: In Finder View Options (Command-J), set Applications to always open in icon view, and Documents to always open in list view. Now open a fresh window and click each in the sidebar. They open as expected, one in icon view, and the other in list view. Now click the back button, and you're looking at the folder you just had open half a second earlier, but it's suddenly shifted to a different view - a view you explicitly told the Finder you didn't want this folder to open in. How does this make sense?
(Thanks to grasshopperus for posting this first at arstechnica: http://episteme.arstechnica.com/eve/forums/a/tpc/f/8300945231/m/982000038831/p/1)

Back button behaviour can be pretty wierd. I usually use the keyboard combination, but for some reason it doesn't work on PDF's and I have to end up using the graphical back button.
There are some websites out there that for some reason or another break the Back button's behaviour. Sometimes I have to hold down the mouse button to get the back button menu in order to work around that problem.
In another case there was this page in Amazon that wouldn't allow me to go back to. Everytime I went to that page the browser to automatically kick me to the next page. I had to disable javascript to work around that problem.

Gmail archiving in iOS doesn't work as expected

Hello,
In the IOS Mail app I can use archive to move my mails to an archiving folder so I can review them afterwards. This works for Outlook.com or exchange accounts but not for Gmail.
In mail advanced options I can set an archive mailbox, for example "Archive" instead of "All Mail".
But then whenever I archive an email it disappears from my inbox but it's not moved to the archive folder I selected ("Archive").
If I check the Gmail website I can see the "inbox label" is removed for that mail but the "[imap]\archive" label isn't added, forcing me to go to the All Mail folder to recover the mail. I understand that's the way archiving works in the Gmail website but having an option to choose an archiving folder in Mail and then not using it gets confusing.
Archiving in OSX Mail works as expected (archive button moves mail to a mailbox called [imap]\Archive).
Also, in iOS, when browsing mailboxes from the settings app the Archive icon is next to the archive mailbox but in the Mail app it's next to the "All Mail" mailbox. That seems like an inconsistent behavior to me.

When you archive email in Gmail, it gets moved out of the In Box. Gmail uses "All Mail" to archive mail, not a folder called "Archive". My experience is that the Mail app on iOS devices exactly mirrors the folder structure of my Gmail account. My interpretation of that setting was that you chose to move the mail to deleted or to whatever folder the mail service uses to archive its mail. And, "All Mail" is that folder for Gmail. I would find it terribly disconcerting if the Mail app on my phone created a folder that didn't exist in my Gmail account.
I haven't used the Mail application on my Mac in years because I hate it so I can't comment on that.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Images in Multicolumn Listbox doesn't work as expected

In the attached example, the symbols are getting displayed in the correct order but missing the symbol for the first row. I can manually select the symbol but by default only the 2nd symbol from the provided array list appear.
Any idea what's the issue?
How to display correct symbol?
Thanks in advance.
Cross-post from LAVA: http://lavag.org/topic/15788-images-in-multicolumn-listbox-doesnt-work-as-expected/page__pid__95584#...
Solved!
Go to Solution.
Attachments:
Images & Multicolumn ListBox.vi ‏10 KB

Hello, Vidula
It seems that index 0 is reserved for the empty symbol, no matter what custom symbol you provided. Adding one image in front before setting symbols array and incrementing ItemSyms indexes solves this problem. However, I can't find any information about this in documentation, which would be nice
Attachments:
Images & Multicolumn ListBox.vi ‏12 KB

Webutil: webutil_file.file_open_dialog with filter doesn't work as expected

Hi
I just tried to open files by using webutil_file.file_open_dialog. Since I only want to select files with the prefix "brp" (e.g. brp0001.txt, brp0002.lis), I fill the parameter file_filter with the value: brp*.*
This doesn't work. The dialog only shows folders, but not the brp*.* files. I tried with switching to capitals, which doesn't solve anything. With the filter set to *.* the dialog shows all folders and files, so that seems to work ok.
Is anyone aware of this problem and know a solution? I'm using webutil 1.0.2 (beta).

K..here's some logging. As far as I can see it's all normal, but it doesn't work (no matter if I use a last | or not). Should be easy to reproduce.
2003-okt-29 09:42:44.547 WUF[setProperty()] Setting property WUF_GFN_DIRNAME to y:\data\
2003-okt-29 09:42:44.567 WUF[setProperty()] Setting property WUF_FILENAME to false
2003-okt-29 09:42:44.567 WUF[setProperty()] Setting property WUF_FILTER to (brp_archief*.*)|brp_archief*.*
2003-okt-29 09:42:44.587 WUF[setProperty()] Setting property WUF_GFN_MESSAGE to bestandsnaam selecteren
2003-okt-29 09:42:44.597 WUF[setProperty()] Setting property WUF_GFN_MULTISELECT to FALSE
2003-okt-29 09:42:44.608 WUF[getProperty()] Getting property WUF_GFN_OPENFILE
2003-okt-29 09:42:45.679 WUF[gfnDialog()] Creating Custom File Filter : Mask=brp_archief*.*, Label=(brp_archief*.*)
2003-okt-29 09:42:45.679 WUF[gfnDialog()] Open File mode
2003-okt-29 09:45:27.203 WUF[getProperty()] Value of WUF_GFN_OPENFILE=

Vi.lib\Utility\config.llb doesn't work as expected in 6.1

I have to modify part of a LV project written in 6.1. I started of writing a patch/VI for the project in 7.1.1, tested it and it worked fine. Then I save it from 7.1.1 > 7.0 > 6.1 and the code doesn't work. I have attached the 6.1 and 7.1.1 code that simply modifies a config data file.
Run both the VI version on the attached data file (save copies of it beforehand as the VI overwites/modifies the .dat file) and you should see for e.g.
4.6.2.1 Name=Pass
Change to
4.6.2.1 Name="4.6.2.1 Extend Ground Cycle"
with 7.1.1
and no change with 6.1
Attachments:
Modify Configuration File.zip ‏52 KB

The problem is at the very end. The 'Close Config Data.vi' changed between 6.1 and 7.0. The input 'Write Configuration File' on 7.0 and higher is default to True, any version before that was default to False. With this set to false, the file is not actually written.
So on 6.1, you need to connect a boolean constant or control set to True to this termianl to write the file.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

KEPM deletion package doesn't work as expected - duplicate entries in COPA

Similar Messages

Maybe you are looking for