KEPM more than one period

Hi All,
In CO-PA planning KEPM, I would like to use period in row instead of header.
At the same time I want to plan more than one period.
Is it possible and how?.
Thanks
Regards

Hi,
If you have too much data, then you can try uploading the plan data using KEFC transaction (Planning functions>Weekly planning).
You can upload alternative period Week (ALTPERIO) value through uplaod file.
Hope this helps.

Similar Messages

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

How can I use the RMS.vi over more than one period?

Hi everyone,
I am using the Cycle average and RMS.VI to get the RMS value of a alternative voltage (2kHz). To acquire this signal I am using a differentiel AI of a 6225 card (at 250kS/s) and the RMS value is correct, it works fine. However from what I have understood, this VI calculates the RMS value according to only one period no matter how many samples I have acquired (2000 samples in the VI I have attached). Is this correct? If so, is ithere a way to use it over all of the 2000 samples to get a more averaged value? Or does another VI exist?
I could repeat several time an acquisition of a short number of samples (a period) and make an average but it would take some time and I have to do this with 39 other Inputs on the same card one after the other...
Thank you for your help,
User
Attachments:
Forum.vi ‏76 KB

User_1979 wrote:
....could you tell me if this VI sends a rms value of X compleat periods (even if I have send X periods and a half for example)?
It gives the RMS value of only the newest set of data.
The RMS and RMS Pt. By Pt. work for me, but it depends on how you break out that Dynamic Data from the Express VI, which was why I suggested you didn't use it - mainly because you can't tell what happens to that data when you wire it to a function and it coerces. Actually, I should say, I can't tell what happens to it. You may know, but I don't.
In the attached screenshot, I have "made" a 2k sine wave with an amplitude of 5. The indicators show RMS value.
Richard
Attachments:
rms.gif ‏14 KB

Not able to see more than one period in DRP Planning Book

Hi
Where do we set the no of periods( days, weeks etc) that should be visbile in the DRP planning book in the SAP SPP.
Also we are getting invalid periodicity in this planning book, when we select one of the available timebucked profile ids. Any clues on this ? How to set it correct?
Regards,

i think like in any other planning book, it should be in the Data view tab in the TB future.
you need to create time bucket profiles though that have the periods you need. And these periods need to be equal to or greater than the Storage bucket profile used in the linked planning area

Divide SA into more than one periods

How can we use different time periods in one schedule agreement?
Actually I mean how we can divide a yearly agreement into some month, in the way that in each month (for the same part) we have different price.because in standard form of SA, there is just one Validity start and end for it.

Hi,
Try in mataining different price for different period in ME11.So when you schedule in ME38, you can enter the different periods.
Regards,
Biju K

More than one posting period variant for one company code

Dear Colleagues,
My question is if it's somehow possible to assign more than one posting period variant to one company code? (I am not a FI specialist...)
(We are using the new GL and would like to define a special posting period interval for a non-leading ledger. The c.codes already exists and are already assigned to a posting period variant.)
The reason for why we would need an additional posting period variant for an existing c.code, is because we are already using both posting period intervals in t.code OB52.)
Best regards
Viveka Schwartz

Hi
You can assign a PPV to the Non Leading ledger separately.. That means both Leading and NOn Leading ledgers can have separate PPVs
Apart from this, no 3rd PPV is possible.. As Eli said, Validation is the only option, but I think Validations work for Leading ledgers only
Br, Ajay M

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

Can I download more than one application, with the free trial?

I'm interested in Illustrator and Photoshop, more immediately. However, will possibly be looking at a full individual subscription, at a later time. Is it possible to download more than one application, for a free trial, at a time?

Jacob Bugge wrote:
It is quite possible, but you may wish to start by downloading the trial the of the first application and start using it before you download the next one, because that will give you more total tryout time than if you download both simultaneously.
I thought the trial period of 30 days starts from the day you use, not from the day you download/install.

Can rented movies be on more than one device at a time?

Can rented movies be on more than one device at a time?

No.
"You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time."
iTunes Store: Movie rental frequently asked questions (FAQ)

Function - Return More than One Value in a Concatenated String

Hi,
Is it possible for a function to return a concatenated string(combining more than one number). I am trying to return the PO number by inputting and invoice_id and code number but an invoice_id can have more than one PO with the same code number. I would like to concatenate the PO numbers with commas e.g.
10124, 10090, 10987
At the moment the function returns null for these cases that have more than one PO number.
Thanks

Also is is possible to create another function that can be called in the same script using the PO number as an IN parameter in SQL. See SQL below:
select cck.concatenated_segments as "Segment" ,
cc.code_combination_id,
NVL ( src . user_je_source_name , '**********' ) AS "Source" ,
NVL ( cat . user_je_category_name , '**********' ) AS "Category" ,
jel . period_name as "Period Name" ,
i.invoice_id as "Invoice ID",
s.vendor_name as "Vendor Name",
s.segment1 as "Supplier No",
jeb . name as "Batch Name" ,
func_get_po(i.invoice_id, cc.code_combination_id) "PO No",
jeh . name AS "Header Name" ,
jel . description AS "Description" ,
jel.accounted_dr AS "Debit" ,
jel.accounted_cr AS "Credit" ,
NVL(jel.accounted_dr, 0) - NVL(jel.accounted_cr, 0) AS "Net Amount"
FROM apps.gl_code_combinations cc ,
apps.gl_code_combinations_kfv cck,
apps.gl_je_lines jel ,
apps.gl_je_headers jeh ,
apps.gl_je_batches jeb ,
apps.gl_je_categories cat ,
apps.gl_je_sources src,
apps.gl_import_references r,
apps.xla_ae_lines al,
apps.xla_ae_headers ah,
apps.xla_events e,
xla.xla_transaction_entities te,
apps.ap_invoices_all i,
apps.ap_suppliers s
WHERE ( cck.concatenated_segments BETWEEN '23.83545.141.000.00.23.000.000' AND '23.83545.141.000.00.23.000.000'
AND cc.CHART_OF_ACCOUNTS_ID = 50328
AND jeh.LEDGER_ID IN
(select acc.ledger_id
FROM apps.gl_access_set_ledgers acc
WHERE acc.access_set_id = 1000
AND jel.code_combination_id = cc.code_combination_id
AND cck.code_combination_id = cc.code_combination_id
AND jel.status
|| '' = 'P'
AND ( jel.accounted_dr != 0
OR jel.accounted_cr != 0 )
AND jeh.je_header_id = jel.je_header_id
AND jeh.actual_flag = 'A'
AND 1 = 1
AND jeh.currency_code != 'STAT'
AND jeb.je_batch_id = jeh.je_batch_id
AND jeb.average_journal_flag = 'N'
and src.je_source_name = jeh.je_source
and cat.je_category_name = jeh.je_category
and r.je_header_id(+) = jel.je_header_id
and r.je_line_num(+) = jel.je_line_num)
AND ( :period_name = jel.period_name
and al.gl_sl_link_id(+) = r.gl_sl_link_id
and al.ae_header_id = ah.ae_header_id(+)
and al.application_id = ah.application_id(+)
and ah.application_id = e.application_id(+)
and ah.event_id = e.event_id(+)
and e.application_id = te.application_id(+)
and e.entity_id = te.entity_id(+)
and nvl(te.source_id_int_1,-99) = i.invoice_id(+)
and i.vendor_id = s.vendor_id(+) )
AND ( jel.ledger_id = 2041)
ORDER BY src.user_je_source_name ,
cat.user_je_category_name ,
jeb.name ,
jeh.name ,
cck.concatenated_segments ,
jel.je_line_num
I am using func_get_po(i.invoice_id, cc.code_combination_id), I would like to call another function in this script that uses the PO number as an IN parameter.
For example func_get_po_requester(i.invoice_id, cc.code_combination_id, func_get_po(i.invoice_id, cc.code_combination_id))
Would this work?
Thanks

Recalculate sum of More than One Asset asset values

Hi Team,
Can you please guide whether there exists any T-code through which we can Recalculate sum of more than One Asset values at single point of time.
ex: iif we go asset master (AS02), in the Edit tab,recalucates values, in the asset master we can do only one single asset,
but as we required do the recalculate asset values at a time more than one asset.
Please let us know is there any t.code ?
Thanks
Ram

Hi Ram,
What you the system does in AS02 Menu: 'Edit - Recalculte values' is exactly the same what AFAR does. The difference is, in AS02 you only recalculate the values for that very asset. But all values that need value recalculated and updated will get adjusted when executing this step. So, if you have made a posting to the asset that for any reason did not update the table yet, and therefore is not reflected in the Asset Explorer, you can first simulate a recalculation for this asset and see what would be the new update of values. Then when you go to AS02 Menu: 'Edit - Recalculte values' the system will actually adjust the values in real time. Same is when you make a change to e.g. depreciation key, it will require an adjustment of values and a recalculation will do that.
So, whether you use AS02 for the single asset or use AFAR - the system does exactly the same.
The difference is however, that in AFAR, you recalculate the values for ALL the assets in that company code. For example, it is recommended that before you do the depreciation run or periodic posting run at the end of each period, that you ran also the recalculation program RAAFAR00 for the company code, so that any value adjustment/changes in values will be captured before running depreciation or periodic postings.
I hope this clarifies. Please also check on the online documentation in help.sap.com for more information.
Else, if you need to adjust other values on the asset and it is not about recalculating values, then you can use a write-up/unplannded depreciation (check it out under Easy Access Menu: Manual Value Correction) or maybe you can use the transaction for miscellanious ABSO.
I hope this helps you further.
Kind regards,
Brigitte

Charts - more than one dimension object on the x axis of the chart

Is it possible to add more than one dimension object on X axis of the chart ? I have two reports - one for bookings revenue for rolling 12 months period and other for forecast revenue for forward going 12 months. I have been asked by my manager to produce one chart showing 12 months rolling bookings plus revenue forcast going forward 12 months in one chart. Is it possible? and if so then how to go about to accomplish it.
Thanks for the help in advance.
- Fizza

hi
i think it is posible. for exaple on x axis can include year, months. on y axis may include sales revenue.
or
what dimensions are you going to put on the x axis and y axis?

Downloading more than one trial?

I'm just wondering if I can download more than one trial.
I downloaded a free trial of Elements 11 but would also like to try photoshop CS6. Can I have both of them on my computer at the same time and will you allow for more than one trial at the same time? Do I have to wait until my trial period is over with Elements 11 before I can try CS6?
Thank You!

You can install and try both software at the same time. The trial period begins once you launch the software for the first time.

Repeating more than one row

Hello All,
Wondering if it is possible to repeat more than one row in a
repeat list with spry? I want to return all my records in my XML
file but I want to have the results repeat in 2 rows:
<tr spry:repeat="ds1">
<td>{year}</td>
<td>{period}</td>
<td>{date_from}</td>
<td>{date_to}</td>
</tr>
<tr spry:repeat="ds1" >
<td>More stuff to view with rrecordset</td>
</tr>
Is this possible?

Hi,
As I understand, you would like to get values from repeating table in workflow.
I found a similar issue for your reference:
http://www.infopathdev.com/forums/p/16298/57204.aspx
If you would like to use formula to show the value, you could refer to the “Eval” formula used in Email To box:
http://blogs.msdn.com/b/infopath/archive/2006/04/05/569338.aspx
However, if you would like to get value from specific row, there is no OOB option that can achieve that, you need to use coding method. Check this thread:
http://social.msdn.microsoft.com/Forums/en-US/09e5aac1-c652-441d-8cc2-725c85994525/using-infopath-repeating-table-in-task-edit-form?forum=sharepointcustomizationlegacy
Regards,
Rebecca Tu
TechNet Community Support

KEPM more than one period

Similar Messages

Maybe you are looking for