Kerbeos & Cyptolib in same app server for GUI-BW & BO -BW SSO
Hi
We have situation wherein we have SSO to BW from SAPGUI (logonpad) using windows AD userid. SNC authentication for this by Kerbeos.
Now for our BO webireports we would like have to scheduling functionality & rowlevel secutiry from underlying BW reports. Hence we need to have SSO between BW & BO ( using windows AD userid)
But SNC authentication for BO-BW SSO uses cryptolib.
Since we can not have both kerbeos & cryptolib in the same app server, is there any alternative solution other than using 3rd party tool like secude?
Is this issue addressed in BI4?
Your help is greatly appreciated.
Thanks
Paddy
Thanks Ingo for the response.
Can you please elobarate when you say "u201D You should check if the SNC libraries that you are using for the client side SNC also allows for server side trust.u201D
Also is this issue addressed in BI4 release?
Thanks
Similar Messages
-
Kodo-ds.xml: how to use for two database in same app server?
hi,
i meet a problem: i have two applications in the same app server(one app
use one database.). BUT, only one kodo-ds.xml can configure the
PersistenceManagerFactory with jndi name. When i figure the two jidi name
for two "<tx-connection-factoy>" in the root element
"<connection-factories>" in the kodo.ds.xml. That's unavailable!
eg:
<connection-factories>
<tx-connection-factoy>
<!-- specify the the first database connection properties with jndi name A
-->
</tx-connection-factoy>
<tx-connection-factoy>
<!-- specify the the SECOND database connection properties with jndi name
B -->
</tx-connection-factoy>
</connection-factories>
THAT'S MY CONFIGURATION. UNAVALIABLE NOW.... Who can help me solve this
problem?
thx!You should deploy multiple kodo-ds.xml files (i.e. kodo-ds-oracle.xml).
Kidwish wrote:
hi,
i meet a problem: i have two applications in the same app server(one app
use one database.). BUT, only one kodo-ds.xml can configure the
PersistenceManagerFactory with jndi name. When i figure the two jidi name
for two "<tx-connection-factoy>" in the root element
"<connection-factories>" in the kodo.ds.xml. That's unavailable!
eg:
<connection-factories>
<tx-connection-factoy>
<!-- specify the the first database connection properties with jndi name A
-->
</tx-connection-factoy>
<tx-connection-factoy>
<!-- specify the the SECOND database connection properties with jndi name
B -->
</tx-connection-factoy>
</connection-factories>
THAT'S MY CONFIGURATION. UNAVALIABLE NOW.... Who can help me solve this
problem?
thx!
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com -
Communication between two web applications deployed on same app server
I need to update the war file of one application(say Application A) from another application(say application B). Actually application B is the admin application of application A.
In order to achieve this, I need to get the ServletContext of A from B. How can I do that?
P.S: Both the applications will be deployed on the same app server and they are app server independent.from the JavaDocs:
http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/ServletContext.html
getContext
public ServletContext getContext(java.lang.String uripath)
Returns a ServletContext object that corresponds to a specified URL on the server.
This method allows servlets to gain access to the context for various parts of the server, and as needed obtain RequestDispatcher objects from the context. The given path must be begin with "/", is interpreted relative to the server's document root and is matched against the context roots of other web applications hosted on this container.
In a security conscious environment, the servlet container may return null for a given URL.
Parameters:
uripath - a String specifying the context path of another web application in the container.
Returns:
the ServletContext object that corresponds to the named URL, or null if either none exists or the container wishes to restrict this access.
See Also:
RequestDispatcher -
Office Web Apps server for Lync DNS question
We are going to deploy an Office Web Apps server for our Lync 2013 clients, available internally and externally. We do not have a split-horizon DNS so it is not possible for wac.foo.com to have a different IP for internal vs. external clients. What is the
best setup for our scenario? It looks like we can only add one address in the Lync topology builder, so would it make sense to send everybody to the external wac.foo.com regardless of whether they are internal vs. external? Or is there a better option?
Thanks,
MattIt might be easiest to use pin-point DNS. Create an internal zone called wac.foo.com with a blank A record that points to the internal IP address of the OWAS/WAC server. This way, wac.foo.com will resolve to the correct
internal address, but you're not setting up a split zone for the rest of foo.com.
This trick can come in handy for publishing other items without recreating the entire zone, it's a nice one to keep in your back pocket.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Same TREX server for KM indexing and e-Recruitment
Hi,
Is it possible to use the same TREX server for KM indexing on the portal and e-Recruiting searches on R/3?
Many thanks
JaneHi,
in general and from a technical view it's possible.
But it depends on the load of the applications, perhaps it's a better approach to separate them e.g. for a productive environment.
Regards, Thorsten -
Create attachment of a file stored on the app server for mail
Hello All:
I am working on sending a mail with attachemnts (file from the app server), i am aware of numerous solutions posted on the forum ....i am able to create an attachment and send mail. the problem i am facing is the attachment is corrupted . can some one guide me as what i am ding wrong . here's the code
DATA: REC(80) TYPE C.
DATA: L_SIZE TYPE DRAO-ORLN.
DATA: L_LINES TYPE I.
DATA: L_DATA_TAB TYPE TABLE OF RCGREPFILE.
DATA: L_DATA_TAB1 TYPE TABLE OF RCGREPFILE.
DATA: L_DATA_WA TYPE RCGREPFILE.
DATA: N_FILE TYPE RCGIEDIAL-IEFILE.
P_FILE = '/usr/sap/MIE/SYS/global/PDFSpools/30978.pdf'.
N_FILE = P_FILE.
CONCATENATE 'C:temp' RQ2NAME '.pdf' INTO ELPATH.
* Read Data from the App server
OPEN DATASET P_FILE FOR INPUT IN BINARY MODE .
DO.
READ DATASET P_FILE INTO REC.
IF SY-SUBRC NE 0.
EXIT.
ELSE.
L_ANN = REC.
APPEND L_ANN TO T_PDF .
ENDIF.
ENDDO.
CLOSE DATASET P_FILE.
* How do i get the filesize ?
CLEAR L_ANN.
DESCRIBE TABLE T_PDF LINES LIN_TEXT.
LOOP AT T_PDF INTO L_ANN.
APPEND L_ANN TO T_ANN.
ENDLOOP.
* Using this i get the file size
* CALL FUNCTION 'C13Z_RAWDATA_READ'
* EXPORTING
* I_FILE = N_FILE
* IMPORTING
* E_FILE_SIZE = L_SIZE
* E_LINES = L_LINES
* TABLES
* E_RCGREPFILE_TAB = L_DATA_TAB
* EXCEPTIONS
* NO_PERMISSION = 1
* OPEN_FAILED = 2
* OTHERS = 3.
* CLEAR L_ANN.
* DESCRIBE TABLE L_DATA_TAB LINES LIN_TEXT.
* LOOP AT L_DATA_TAB INTO L_DATA_WA.
* L_ANN-LINE = L_DATA_WA-ORBLK.
* APPEND L_ANN TO T_ANN.
* ENDLOOP.
DOC_CHNG-OBJ_NAME = 'URGENT'.
DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
DOC_CHNG-OBJ_DESCR = TEXTS.
DOC_CHNG-SENSITIVTY = 'O'.
* DOC_CHNG-DOC_SIZE = LIN_TEXT * 255.
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
* OBJPACK-BODY_NUM = LIN_TEXT.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
NOMFITXER = ELPATH.
CALL FUNCTION 'SPLIT_FILENAME'
EXPORTING
LONG_FILENAME = NOMFITXER
IMPORTING
PURE_EXTENSION = EXTENSIO.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = LIN_TEXT.
OBJPACK-DOC_TYPE = EXTENSIO.
OBJPACK-OBJ_NAME = RQ2NAME.
CONCATENATE RQ2NAME EXTENSIO
INTO NOMFITXER SEPARATED BY '.'.
OBJPACK-OBJ_DESCR = NOMFITXER.
OBJPACK-DOC_SIZE = L_SIZE * 255.
APPEND OBJPACK.
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
USERNAME = SY-UNAME
TABLES
RETURN = BAPIRETUR
ADDSMTP = DADESUSER.
READ TABLE BAPIRETUR WITH KEY TYPE = 'E'.
IF SY-SUBRC NE 4.
ELSE.
READ TABLE DADESUSER INDEX 1.
* REMITENT = DADESUSER-E_MAIL.
REMITENT = SY-UNAME.
ENDIF.
TEXTS = 'TEST MAIL'.
APPEND TEXTS.
DESTINATARIS-RECEIVER = SY-UNAME.
DESTINATARIS-REC_TYPE = 'B'.
DESTINATARIS-EXPRESS = 'X'.
* DESTINATARIS-COM_TYPE = 'INT'.
* DESTINATARIS-NOTIF_DEL = 'X'.
* DESTINATARIS-NOTIF_NDEL = 'X'.
APPEND DESTINATARIS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = REMITENT
* SENDER_ADDRESS_TYPE = 'SMTP'
COMMIT_WORK = ' '
IMPORTING
SENT_TO_ALL = ENVIAT
* NEW_OBJECT_ID =
* SENDER_ID =
TABLES
PACKING_LIST = OBJPACK
* OBJECT_HEADER =
CONTENTS_BIN = T_ANN
CONTENTS_TXT = TEXTS
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = DESTINATARIS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Message was edited by: Poornanand Mandalika. Code was formatted using the <b>Code</b> button!!Assuming you are using Apache?
You could place your Word docs in the same folder as your current Apex images directory (or a sub-directory off it) then reference them with a URL of the form http://yourserver/i/sample_word_file.doc. Alternatively you could add a new Alias entry to your dads.conf file (found in your Apache/modplsql/conf directory) to expose the folder on your webserver that contains your Word files via a URL such as http://yourserver/word_docs/
E.g.
Alias /word_docs/ "c:\my_docs\technical_word_docs/"
Andy -
Where can I download the pure java edition app server for windows
Where can I download a copy of the uncertified windows version of the app server listed below?
OracleAS Java Edition v9.0.4
Oracle HTTP Server
OracleAS Containers for J2EE
Oracle Enterprise Manager
OracleAS TopLink
Oracle JDeveloper
Currently certified: Solaris, HP, Linux
(I am not interested in the 10.0.3 preview version of the app server)
I went to the Production release download area for the Application Server and they only let you download the Certified version of this SW which is for Linux, HP, and Linux.
I went to the Pre-release download area and they only have the 10.0.3 preview versions listed for download.
We want to install the above-mentioned version of an intel box running Windows for our integration point and we have linux boxes setup for production. We would like to use the same version of the app servers on all 3.
Any ideas out there?Go into
Applications / Utilities / Java Preferences.app
and make sure you have the 'Enabled' boxes checked for both 64 and 32-bit.
Finally, in
Safari > Preferences | Security
make sure the 'Enable Java' box is checked.
Message was edited by: softwater -
Office web apps Server for Sharepoint 2013
Hello,
I used the following article to install office web apps server and hook it up to a test sharepoint server:
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx. The OWAS service was verified as working by loading:
https://owas.companyname.com/hosting/discovery
For the sharepoint configuration phase, the following commands were run on the sharepoint machine:
1) New-SPWOPIBinding -ServerName "owas.companyname.com" -- (owas.companyname.com) is the host name of the owas server)
2) Get-SPWOPIZone
3) Set-SPWOPIZone -zone "external-https"
However, office documents are still launching in the desktop office applications, not in the browser. Any ideas of what else I may need to do?
thanks,
SherazadHi ,
According to your description, my understanding is that you fail to configure Office Web Apps for your SharePoint 2013.
How about run Get-SPWOPIZone? If you can get a result, it says that your SharePoint have connected with Office Web Apps.
Then you can run below command to change the zone to internal-https.
Set-SPWOPIZone -zone "internal-https"
Reference:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
SQL Server 2008 on the Web/App server for BPC 7.0
In a multi-server environment (DB/OLAP on a 64-bit platform, Web/App on a 32-bit platform), is it necessary to have SQL Server on the Web/App server if Reporting Services is not used? Could you explain why SQL Server is needed on this server if Reporting Services is not used?
Hi
Reporting Service is a requirement for BPC. If it is not deployed on App Server, it can be deployed elsewhere but is required.
Other SQL related things that go on App Server include:
Reporting Services
Shared Features
Client Tools Connectivity
Management Tools - Complete
Business Intelligence Development Studio
Integration Services
Client Tools Backward Compatibility
Microsoft SQL Server 2005 Backward Compatibility Components from Microsoft SQL Server 2008 Feature Pack
Reporting Services/Integration Service requires SQL license(s). Standard ediiton of these can be used if you are not performing Load Balanced deployement.
Regards
Shaam -
Error when booting app server for first time
Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PMIf not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas. -
Sharing the same outgoing server for more than one email in mail program
A local computer company has web servers and he has assigned me a website with my own domain and I have two emails under that domain. I can't seem to setup these two emails to work correctly in apple mail. It's telling me that I can't have the same outgoing server setup for both email accounts. This is how the server is run. Both my emails which are assigned under my domain web url both use the same outgoing server. Is there anyway around this error or am I stuck?
thanksThis is important.
-
App Server for deploying JDev Apps
Hello,
I am trying to find out the app server of
choice for the apps we develop using
JDeveloper. I am not quite sure that OAS
is going to cut it for EJB/Servlet/..
apps when compared to websphere/weblogic/
iplanet etc. Can I please get the feedback
of this forum ?
thanks
sanjay
nullHow Do I Deploy Enterprise JavaBeans to IBM WebSphere?
http://www.oracle.com/technology/products/jdev/howtos/appservers/deploy_to_websphere.html -
App Server for Interactive Voice system
Hi everyone
Can i use Oracle Application Server for Interactive Voice Respond System(using the phone not wireless)?
Thanks in advanceIf you have different RPs for each IVS, nothing to do about load balancing, you would need to have the same RP and have the 2 SIP trunks in the same RG/RL
For limiting the number of calls, you can use CAC. -
Did everything discussed in the article and the app still will not rotate. Coworkers with the same app do not have this issue
If you haven't got rotation lock on (other apps and/or the homescreen rotate ?) then try closing the app that isn't rotating via the taskbar and see if it rotates when you re-open the app : from the home screen (i.e. not with the app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then also try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Invoking bpel process from another bpel process in same app server
Hi,
When I invoke a bpel process from another bpel process in the same oracle AS
1. Is it a SOAP call or is there any optimization?
2. If there is some optimization where can I configure this?
3. Is there any similar optimizations if I invoke a bpel process from a
java application deployed in the same server? If so can you please provide
a sample?
Thanks for your help
RajBy default the BPEL 10.1.2, it will do a local call to the process. It will not execute a SOAP request, no network access is done.
It can be configured at domain level:
Parameter: optSoapShortcut (SOAP local optimization)
Turns on "short-cut" for local SOAP request; local SOAP calls are normally done via an internal call instead of sending a message through the SOAP stack.
The default behavior for the engine is to optimize all. To disable optimization specify a value other than "true" or "yes".
Maybe you are looking for
-
I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.
-
Pegasus R4 refusing to mount on nMP and Mac Mini
Just setting up a nMP that I'd bought a Pegasus R4 for. Mac Pro is great, but the Pegasus R4 doesn't mount. It appears in the System Report as a recognised/named device on the Thunderbolt Bus, but it just doesn't mount/appear on desktop. Promise Util
-
Syncing iPad to iTunes is getting stuck and frozen
I am running into a problem when trying to sync my iPad 1 to iTunes. It backs up of but gets stuck on the last stage, "Waiting for changes to be applied". I had been able to sync fine until loading iOS5. Does anyone have any idea how to clear this up
-
Converting Varchar to DateTime
I need to convert a varchar column currently holding date and time to a proper datetime field. Example of the current view CRIS_Date 05/02/2014 1130 03/02/2014 1105 05/02/2014 1145 03/02/2014 05/02/2014 0930 After 05/02/2014 11:30 03/02/2014 11:05 05
-
Inserting xsl into existing page
Hello .. I am now attempting to add an .xsl file I created into an existing page. I am unsure of how to add this into my page ..here is the xsl file below. Thanks Rob <?xml version="1.0" encoding="utf-8"?><!-- DWXMLSource=" http://hosted.ap.org/lineu