Kerberos audit failures, ~38-42 events PER MINUTE
We have a server running "Windows Server Standard FE" 64bit SP2 (I know, embarrassing). The issue is that our Security log is getting FLOODED with audit failures from Kerberos Service Ticket Operations. We will see 38 all with the EXACT same time-stamp,
then sometimes the next minute will have another 40, sometimes it's a 5 minute gap, sometimes it's a more random gap but regardless it never waits too long before another huge burst of failures. We actually have the issues on other machines running newer system
(2k3, 2k8) but this one is hands down the most troublesome.
Honestly I might be out of my depth here as I'm really not too keen on Kerberos ticket requests, but any information around this would be greatly appreciated to help me investigate the issue further. These errors haven't actually led to any problems or other
errors, just bug the heck out of me when checking audits.
A Kerberos service ticket was requested.
Account Information:
Account Name: <hostname>$@<domain>.LOCAL
Account Domain: <domain>.LOCAL
Logon GUID: {00000000-0000-0000-0000-000000000000}
Service Information:
Service Name: krbtgt/<domain>.LOCAL
Service ID: NULL SID
Network Information:
Client Address: ::1
Client Port: 0
Additional Information:
Ticket Options: 0x60810010
Ticket Encryption Type: 0xffffffff
Failure Code: 0xe
Transited Services: -
This event is generated every time access is requested to a resource such as a computer or a Windows service. The service name indicates the resource to which access was requested.
This event can be correlated with Windows logon events by comparing the Logon GUID fields in each event. The logon event occurs on the machine that was accessed, which is often a different machine than the domain controller which issued the service ticket.
Ticket options, encryption types, and failure codes are defined in RFC 4120.
:(
Similar Messages
-
Hi everyone,
I'm building a heart rate monitor as a final year project with my lab partner using the NI USB-6009 and Labview 2009. We have managed to obtain a signal using a photo transciever, smooth it out and count the events, however the count is incremental.
We wish to count the number of pulses we obtain for a few seconds (5-10 for example) and then use this value to obtain a pulse rate in beats per minute (e.g. 10 pulses in the first 10 seconds would give an estimated BPM of 60 etc etc).
Does anybody have ides on how we could implement this? We have tried timed loops, elapsed time VI's and other things but nothing gives us what we need.
Thanks in advance for any help that is offered.
Jeshua Graham.We are very new to Labview. We are taking a raw signal from our DAQ and then using VIs to filter and then trigger counts on rising edges. I have attached our vi file to this post for you to look at (I hope that is what you mean by code).
Attachments:
TCRT-1010DAQ_jeshua1.vi 367 KB -
Event 672 audit failure after migration to hosted Exchange
I recently migrated a company to hosted Exchange. They had been previously using in-house Exchange 2003 (on SBS 2003). Exchange has been removed form the server and the 2003 SBS server is still running as the DC.
Right after the migration the server began to recieve Error 672 failure audits, 1000s per day.
I suspect these can be safely ignored, but is there a way to stop them as they show up on daily security reports.
-Ken
Event Type: Failure Audit
Event Source: Security
Event Category: Account Logon
Event ID: 672
Date: 11/24/2014
Time: 10:11:40 AM
User: NT AUTHORITY\SYSTEM
Computer: BUZZ
Description:
Authentication Ticket Request:
User Name: user@hosted Exchange.lan
Supplied Realm Name: COMPANY.LOCAL
User ID: -
Service Name: krbtgt/COMPANY.LOCAL
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: -
Pre-Authentication Type: -
Client Address: 192.168.x.x
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:Hi Ken,
I suspect these can be safely ignored, but is there a way to stop them as they show up on daily security reports.
We can stop audit failure events from being logged in Event Viewer by editing audit policy. More specifically, we can set the Group Policy setting
Audit logon events to not to audit logon failure
(uncheck the Failure checkbox), here is a screenshot below:
Best Regards,
Amy -
Audit failure every 2 minutes on a W2K8 standalone Server in a Workgroup EventID 4625
Hello
By chance I discovered that every 2 minutes there is a login failure on my standalone (Workgroup) W2K8 R2 Server.
The administrator is disabled (login errors also appear when administrator user is enabled).
Could not find any tasks that are running with administrator credentials. It seems to me that it must be from the same machine, as the source IP Address is 127.0.0.1.
Does anyone have an idea?
Here the log:
An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: NS2308064$
Account Domain: WORKGROUP
Logon ID: 0x3e7
Logon Type: 2
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: Administrator
Account Domain: NS2308064
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0x20c
Caller Process Name: C:\Windows\System32\winlogon.exe
Network Information:
Workstation Name: NS2308064
Source Network Address: 127.0.0.1
Source Port: 0
Detailed Authentication Information:
Logon Process: User32
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
Thanks & Regards
ChrisHi,
This a forum for windows 7.
Please focus on one post to get better solutions.
http://social.technet.microsoft.com/Forums/en-US/5019d759-b497-44e4-a82a-4fefd4e367c6/audit-failure-every-2-minutes-on-a-w2k8-standalone-server-in-a-workgroup-eventid-4625?forum=winserversecurity
Thanks for your understanding!
Regards,
Ada Liu
TechNet Community Support -
Maximum number of events per audit log file must be greater than 0.
BOE-XI (R2)
Windows Server 2003
Running AUDIT features on all services.
Report Application Server (RAS) keeps giving the following error in the Windows Application Event Log.
Maximum number of events per audit log file must be greater than 0. Defaulting to 500.
I am assuming that this is because the RAS is not being used by anyone at this time - and there is nothing in the local-audit-log to be copied to the AUDIT database.
Is there any way to suppress this error...?
Thanks in advance for the advice!A couple more reboots after applying service pack 3 seemed to fix the issue.
Also had to go to IIS and set the BusinessObjects and CrystalEnterprise11 web sites to use ASP .NET 1.1 instead of 2. -
Audition - Multitrack - beats per minute ändern
Ich habe aus verschiedenen Liedern mir ein neues zusammengestellt. Dieses möchte ich nun schneller bzw langsamer laufen lassen. Ich kenne es so, dass man irgendwo die Einstellung beats per minute hat und dort kann man dann eine bestimmte Geschwindigkeit angeben. Das Lied wird dann auf die neue Geschwindigkeit umgerechnet und ist dann kürzer bzw. länger. Wo finde ich denn so eine Einstellmöglichkeit im Audition? In den Eigenschaften des Multitrack gibt es zwar die Angabe beats per minute, man kann es auch ändern, aber ich kann keine Veränderung meines Liedes feststellen. Was mache ich verkehrt?
Vielen Dank schon mal im voraus
SusanneTempo changes in CS6?
Adobe Audition Help | Navigating time and playing audio -
Multiple security audit failures a second
A client's SBS 2011 machine is experiencing multiple audit failures a second and we believe it is diminishing the performance of the machine. We can't seem to find the source or how to remedy the issue. It its happening way too fast to be a human trying
to login.
Keywords Date and Time Source Event ID Task Category
Audit Success 6/18/2014 1:50:32 PM Microsoft-Windows-Security-Auditing 4905 Audit Policy Change "An attempt was made to unregister a security event source.
Subject
Security ID: SYSTEM
Account Name: SBS$
Account Domain: <ommited from forum post>
Logon ID: 0x3e7
Process:
Process ID: 0x10d4
Process Name: C:\Program Files\Windows Server\Bin\SharedServiceHost.exe
Event Source:
Source Name: ServiceModel 4.0.0.0
Event Source ID: 0x262070f0"
Audit Success 6/18/2014 1:50:32 PM Microsoft-Windows-Security-Auditing 4904 Audit Policy Change "An attempt was made to register a security event source.
Subject :
Security ID: SYSTEM
Account Name: SBS$
Account Domain: < ommited from forum post >
Logon ID: 0x3e7
Process:
Process ID: 0x10d4
Process Name: C:\Program Files\Windows Server\Bin\SharedServiceHost.exe
Event Source:
Source Name: ServiceModel 4.0.0.0
Event Source ID: 0x262070f0"
Audit Failure 6/18/2014 1:50:32 PM Microsoft-Windows-Security-Auditing 4625 Logon "An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: SBS$
Account Domain: <ommited from forum post>
Logon ID: 0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x24c
Caller Process Name: C:\Windows\System32\lsass.exe
Network Information:
Workstation Name: SBS
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Schannel
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
Subject
Security ID:
SYSTEM
Account Name:
SBS$
Account Domain:
<ommited from forum post>
Logon ID:
0x3e7
Process:
Process ID:
0x131c
Process Name:
C:\Program Files\Windows Server\Bin\SharedServiceHost.exe
Event Source:
Source Name:
ServiceModel 4.0.0.0
Event Source ID:
0x26206ef4"
Audit Success 6/18/2014 1:50:32 PM
Microsoft-Windows-Security-Auditing
4904 Audit Policy Change
"An attempt was made to register a security event source.
Subject :
Security ID:
SYSTEM
Account Name:
SBS$
Account Domain:
<ommited from forum post>
Logon ID:
0x3e7
Process:
Process ID:
0x131c
Process Name:
C:\Program Files\Windows Server\Bin\SharedServiceHost.exe
Event Source:
Source Name:
ServiceModel 4.0.0.0
Event Source ID:
0x26206ef4"
Audit Failure 6/18/2014 1:50:32 PM
Microsoft-Windows-Security-Auditing
4625 Logon
"An account failed to log on.
Subject:
Security ID:
SYSTEM
Account Name:
SBS$
Account Domain:
<ommited from forum post>
Logon ID:
0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason:
Unknown user name or bad password.
Status:
0xc000006d
Sub Status:
0xc0000064
Process Information:
Caller Process ID:
0x24c
Caller Process Name:
C:\Windows\System32\lsass.exe
Network Information:
Workstation Name:
SBS
Source Network Address:
Source Port:
Detailed Authentication Information:
Logon Process:
Schannel
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
Jerry THi Jerry,
Windows logs logon type 3 in most cases when you access a computer from elsewhere on the network. This is usually
related to share folders, printers, IIS and so on.
Would you please let me confirm whether you had installed some third-party applications?
Meanwhile, please refer to Robert’s suggestion in the following similar thread and check if can help you.
Audit
Failure - Event 4625
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and RegardsAAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business. -
An account failed to log on unknown username or password. Causing Login audit failures
I have a SBS11 Essentials server that is getting audit Failures over and over again. There computer account says it's the SBS11 server it's self. It says unknown user name or bad password. I have checked for scheduled tasks, backup jobs, services and
non of them are using any special user accounts. I have used MS network monitor and can't find anything helpful to lead to the issue. All computers in the network are running Windows 7. The domain functional level is 2008 R2.
I get a the 4768 event ID about a Kerberos event and then just after I get a Event ID 4625 account failure with Logon Type 3. I have includes the events below. I need to figure what is causing the audit failures as my GFI Test Hacker alert is
catching it every morning. Disabling the Test Hacker alert is not a option. I have used Process Explorer also but can't seem to pin it down. I also enabled Kerberos logging.
http://support.microsoft.com/kb/262177?wa=wsignin1.0. All event codes state its a unknown or no existing account but how do I stop it from happening?
This is from the System Event log
A Kerberos Error Message was received:
on logon session TH.LOCAL\thsbs11e$
Client Time:
Server Time: 14:59:53.0000 3/4/2014 Z
Error Code: 0x6 KDC_ERR_C_PRINCIPAL_UNKNOWN
Extended Error:
Client Realm:
Client Name:
Server Realm: TH.LOCAL
Server Name: krbtgt/TH.LOCAL
Target Name: krbtgt/[email protected]
Error Text:
File: e
Line: 9fe
Error Data is in record data.
This is from the Security Event log
A Kerberos authentication ticket (TGT) was requested.
Account Information:
Account Name: S-1-5-21-687067891-4024245798-968362083-1000
Supplied Realm Name: TH.LOCAL
User ID: NULL SID
Service Information:
Service Name: krbtgt/TH.LOCAL
Service ID: NULL SID
Network Information:
Client Address: ::1
Client Port: 0
Additional Information:
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: 0xffffffff
Pre-Authentication Type: -
Certificate Information:
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:
Certificate information is only provided if a certificate was used for pre-authentication.
Pre-authentication types, ticket options, encryption types and result codes are defined in RFC 4120.
I then get teh following error in the next event
An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: THSBS11E$
Account Domain: TH
Logon ID: 0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x25c
Caller Process Name: C:\Windows\System32\lsass.exe
Network Information:
Workstation Name: THSBS11E
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Schannel
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.Well I opened the case for him and he never followed up with Microsoft :-(
It's a kerberos issue, we're told to ignore it. Would you be willing to be patient and stubborn and work with CSS to at least understand what's going on better? I can tell you it's normal with Essentials but not the exact technical reason it's
happening.
Unfortunately TechNet isn't coming back, sorry folks :-( -
Unable to receive an email by task scheduler on audit failure in windows server 2008 r2 security log
Deal All,
I am sorry in advance if i would be on wrong forum, i have created a task on Server 2008 r2 Domain controller that when an audit failure event triggered in windows security log then an email should reach on my email ID, but unfortunately, nothing happen
on audit failure.i receive no email from task scheduler.
kindly suggest me to resolve the issue. I have created Email task on event ID 4771.
Thanks.
Zeeshan Ibrahim Network AdministratorHi Zeeshan,
I have found a hotfix against the same error messages, though it applies to Windows Vista and Windows Server 2008, I am not sure if it will work on your machine.
Please refer to this KB article below:
Duplicate triggers are generated incorrectly in scheduled tasks in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2617046
Please feel free to let us know if this hotfix couldn’t help you fix this issue.
Best Regards,
Amy Wang -
4265 Audit Failure: NTLM Authentication Issue from constant Outlook Login Prompts
Hello Technet!
Last week I started running into a domain-wide issue where users could authenticate while connected to the domain, but would receive prompts to log in to our external host. The first prompt is for mail.domain.local, which works fine inside the office, and
the second is owa.domain.com, which continually fails.
On the second prompt, the Exchange 2007 server (on Server 2008 R2) reports the following error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 3/19/2015 9:10:19 AM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: mail.domain.local
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: DOMAIN-PC
Source Network Address: 12.345.67.89
Source Port: 56984
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
I've gone through quite a few attempted fixes already, all to no effect:
1. I've both added BackChannelHostName to the server's registry, as well as described here: https://support.microsoft.com/en-us/kb/896861
2. Verified SSL Cert status
3. Internal and External OWA URI is set to owa.domain.com in EWC
4. Set up the IIS7 authentication and SSL settings to their defaults, as described here: http://msexchangeguru.com/2010/10/05/autodiscover/
5. I added a SRV record for autodiscover on our DC to correct an EXPR auth issue: https://acbrownit.wordpress.com/2012/12/20/internal-dns-and-exchange-autodiscover/
Despite all these things, I haven't yet seemed to scratch whatever itch Exchange is having. All of the client Outlooks will get the prompt for owa.domain.com, even though their mail is working because they're in the office or on VPN. For whatever reason,
the Mac Outlook 2011 users cannot authenticate to the mail server at all, so they are the ones hit the hardest by this issue.
Any insight everyone here at TechNet can offer would be appreciated. Every fix and workaround I've looked at has either changed nothing, or pointed to something that was already configured properly. If there are details missing that I could offer to provide
a better idea of the problem, please let me know. Thank you.
-- Brian Q.Hi,
Yes, it may be caused by the security updates on March 10, 2015. Please refer to the known issue in the following KB:
http://support.microsoft.com/en-us/kb/3002657
Please remove the security patch on the DC and restart server to have a try. Additionally, here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/1b2a24d9-3d77-49f6-9d0f-63c71da64827/password-prompt-after-exchange-server-windows-updates?forum=exchangesvrclientslegacy
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
I am having an issue with server's randomly getting 1000's of audit failure errors, usually a reboot fixes the problem for a while but i need to get to the root cause of the issue. This is a virtual environment. I have 3 esx host running esx 4.1. The
first error i get is usually this
Message: 'This computer was not able to set up a secure session with a domain controller in domain NJ1due to the following: The RPC server is unavailable. This may lead to authentication problems. Make sure that this computer is connected to the network.
If the problem persists, please contact your domain administrator. ADDITIONAL INFO If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise,
this computer sets up the secure session to any domain controller in the specified domain.'
Data: 'C0020017'
The computer is still on the network as i can RDP to it. The 1000's of event ID errors are all the same See Below
n account failed to log on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svc_or
Account Domain:
nj1
Failure Information:
Failure Reason:
An Error occured during Logon.
Status:
0xc000005e
Sub Status:
0x0
Process Information:
Caller Process ID:
0x0
Caller Process Name:
Network Information:
Workstation Name:
NJ100-MGMT01
Source Network Address:
10.8.32.45
Source Port:
56481
Detailed Authentication Information:
Logon Process:
NtLmSsp
Authentication Package:
NTLM
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Any help would be appreciated.@Pace0214
I need a little more info on your environment to get a feel for what may be going on. How many domain controllers are you using? How many sites do you have? How are they configured, i.e., hub and spoke, spanned, etc.? Do you have DC's
in the sites? Are you using AD integrated DNS or some other method? These are the big ones that come to mind.
Mr. X has got you looking in the right places, these types of errors are usually DNS or IP configuration related. AD uses subnets to find everything that DNS doesn't. It is what clients use to locate a DC to authenticate against and unless
properly configured, you will get these types of errors.
Gary
Gary G. Gray
MCP, MCTS, MCITP, MCT Alumni
Please remember to mark the replies as answers if they are helpful.
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
Windows 7 Security Audit Failure message 6281 & Security Kernel
OS: Windows 7 Home Premium Ver 6.1 Build 7601 SP 1
Toshiba Satellite C655
I received a Windows 7 Security pop-up saying there was a Kernel mismatch and asked if I wanted to proceed. Not thinking - i hit yes. Looking through the Security Audit Log - I found an audit failure with 6281 System Integrity Error. I
am assuming they are related.
Any idea what have I done and what do I need to check/do to recover?
ThanksHi,
Please upload us the full error messages here, we need more information to narrow down the cause. Then check into
Event Viewer, see if any other errors logged.
Besides, check to see if there are any devices have new drivers need to update.
Mostly this error is caused by the "Realtek Audio HD driver", please check to see if we have any related devices.
Reference:
Windows 7 freeze after shutdown
Best regards
Michael Shao
TechNet Community Support -
Hi, trying to write a typing tutor program.
Having trouble calculating the words per minute.
Does anyone know what Im doing wrong?
import java.awt.*;
import java.util.Timer;
import java.util.TimerTask;
import java.awt.Component;
import java.awt.Container;
import java.awt.Font;
import java.awt.Image;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
import javax.swing.JFrame;
import javax.swing.JTextArea;
import javax.swing.JTextField;
import javax.swing.JLabel;
class TTutor extends JFrame{
final JTextArea area= new JTextArea();
final JTextField field = new JTextField(40);
GridBagConstraints constraints = new GridBagConstraints();
JLabel label = new JLabel();
String[] phrase = { "In a world full of people",
"Only some want to fly",
"Isn't that crazy?"};
int i = 0;
int j = 0;
int time = 0;
double wps = 0;
double wpm =0;
int words= 0;
int count = 0;
public TTutor(){
super("TTutor v1.0");
void addGB (Component component, int x, int y){
constraints.gridx = x;
constraints.gridy = y;
add(component, constraints);
private void createAndShowGUI(){
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(600, 300);
setLocation(200, 200);
setLayout(new GridBagLayout());
area.setFont(new Font("Serif", Font.PLAIN, 18));
area.setText(phrase[0]);
area.setEditable(false);
addGB(area, 1, 0);
field.addKeyListener(new KeyListener(){
public void keyTyped(KeyEvent e){
update(e);
count++;
public void keyPressed(KeyEvent e){
if (e.getKeyCode() == KeyEvent.VK_LEFT){
System.out.println("Left");
e.consume();
public void keyReleased(KeyEvent e){}
Image image = Toolkit.getDefaultToolkit().getImage("keyboard.jpg");
addGB(new ImageComponent(image), 1, 1);
addGB(field, 1, 2);
Timer timer = new Timer();
TimerTask task = new TimerTask(){
public void run(){
time++;
String clock = String.valueOf(time);
System.out.println(clock);
System.out.println(count);
System.out.println(words);
System.out.println(wps);
System.out.println(wpm);
//calculate the words per minute - Anyone have any ideas?
try{
words = count/5; //1 word = 5 characters
wps = words/time;
wpm = wps * 60;
}catch(Exception e){System.out.println("error");}
String Wpm = String.valueOf(wpm);
label.setText("");
repaint();
timer.scheduleAtFixedRate(task, 1000,1000);
addGB(label, 2, 2);
setVisible(true);
field.requestFocus();
public void update(KeyEvent ke){
char c = ke.getKeyChar();
System.out.println("" + (int)c);
try{
if (field.getText().equals(area.getText())){
phrase[j] = phrase[j++];
area.setText(phrase[j]);
field.setText("");
i=0;
}catch(Exception e){System.out.println("error");}
if (j == phrase.length){
field.setText("");
field.setEditable(false);
area.setText("Finished");
if (c == 8){
ke.consume();
System.out.println("Backspace consumed: "+ke.isConsumed());
field.setText(area.getText().substring(0, i));
return;
if (i < area.getText().length()){
char ac = area.getText().charAt(i);
if (c == ac){
System.out.println("match");
i++;
}else{
System.out.println("no match");
ke.consume();
}else{
ke.consume();
public static void main (String[] args){
java.awt.EventQueue.invokeLater(new Runnable(){
public void run(){
new TTutor().createAndShowGUI();
}Regards ABourke.Does anyone know what Im doing wrong?http://www.catb.org/~esr/faqs/smart-questions.html
Now, before you take that the wrong way, please understand that the folks who answer questions here are volunteers. You're asking them to do a great deal of work just to figure out what problem you're having; not what the solution is, what the problem is. It's in your best interest to make your questions interesting and easy to answer. I can assure that few people will find copying, compiling, running, and playing detective just to figure out what trouble YOU are having is not likely to be easy to answer or interesting to anyone.
Please consider this carefully, google "SSCCE", and rephrase your question. Thanks!
~ -
Audit failures on Exchange 2010 and password prompts in outlook
Starting last Thursday after I patched my domain controllers and other Windows systems and rebooted my Outlook users are being prompted for username/password continuously and my Exchange security logs reflect audit failures for NTLM which I think is triggering
the prompt. The same users also have an audit success via Kerberos.
If the password prompt it cancelled Outlook can send and receive email just fine but the box continues to pop up occasionally.
I've worked on this for several days now and can't figure it out. The audit logs on the DC's are clean with no audit failures.
The issue is also affecting Visual Studio users who log into a Team Foundation Server, they are continually prompted for credentials and can't get in and the audit logs show the same thing.
I don't think this is an Exchange specific issue but more of a broader authentication problem.
Can anyone shed any light on this?
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: mart.marc
Account Domain: AOF
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: AOG-LP047
Source Network Address: 10.10.1.159
Source Port: 50075
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0Hi,
It is a known issue if you install the following security updates on March 10, 2015:
http://support.microsoft.com/en-us/kb/3002657
The user would be prompted with credentials when NTLM is used to authenticate these Active Directory domain users and services.
We can remove this patch from all the DCs manually and check whether the issue persists.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Report not opening in windows 8
hello all, on some machines report not opening after windows 8 installed can anyone had this issue . Please help.. Dilip Patil..
-
Error message url not supported by file
When I'm on the internet, I randomly get an error message that reads 'url not supported by file:' What does this mean? Okay, just read other comments on this and I shut off my Time Machine for now - hopefully this works. Thanks
-
Hi, is there any tweaking that I should do to my xml files after the page is published to give it identity and perhaps a tune up for better search results? Any help would help.
-
Access denied exception How do I diagnose?
Exception in thread "AWT-EventQueue-0" java.security.AccessControlException: access denied (java.lang.reflect.ReflectPermission suppressAccessChecks) at java.security.AccessControlContext.checkPermission(Unknown Source) at java.security.Acc
-
Horizon auto-login all the way to the Win desktop?
Environment is 4.1 Essentials, VMWare View 4.6, with Horizon 3.3.0 client. The desired behavior is to start Horizon (with login as current user enabled) and go all the way through to the VDI Windows desktop automatically, skipping the Windows (domain