Kerberos Authenication (TGT) "Event 4768" with"PID 467" and "result 0x12"
Ok so I am looking at some system logs and I have ran into multiple instances of event 4768. Like they pop up every 3-6 minutes. All logs started on the 16th of June and are ongoing.
I know that this particular code (4768) traces back to requesting a ticket via Kerberos Authentication (each time someone logs onto a workstation the event is logged as such).
What I want to know is when the event 4768 is paired with "Process ID 476" and " Kerberos Result 0x12" is this event dangerous and what can be done?
Notes: Windows Server 2008.
Generated under "Microsoft Windows Security Auditing"
Service ID: Null SID
I also have not seen a bunch of 4771 codes with the 0x18 error.
Hi,
Based on my research, the code 0X12 means client’s credentials have been revoked.
Would you please tell us is this error code related one specific user?
If so, please check this user account to see if it’s been locked or expired.
More information for you:
Appendix D: Kerberos and LDAP Troubleshooting Tips
http://technet.microsoft.com/en-us/library/bb463167.aspx
Best Regards,
Amy
Similar Messages
-
No event method with matching name and signature found on EventSet
Dear,
I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
Thanks for your help,
Regards,
MathieuIt is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
See you,
Mathieu -
Event Hubs with IoT device and HTTPS
I am currently working with setting up an Azure IoT demo showcasing the power of Event Hubs and a few other technologies. The devices I am working with use very basic WiFi chips that run off AT commands. The Wifi chip and supporting microcontrollers do
not support SSL. Is there any way to upload events to event hub without SSL?Azure Service Bus doesn't allow unsecure traffic. One solution might be to build your own bridge/proxy such as a web service where your devices talks to it and this service pushes events to Azure EventHubs.
-
Can I use events imported with iMovie 11 and on exhard drive, in iMovie 6?
I would like to open DV files in iMovie6 which are stored on external hard drive (imported with iMovie 11). How do I do this please? Would there be any loss of quality even if I knew how to do this? I asked this question previously but I was a bit more 'confused' then.
Dear Tom, Thank you, thank you - it's so easy when you know how! I had previously dragged the folder over and it didn't come cleanly. Gosh. ' File' then 'Import '- it's magic really. Ta again.
-
Help with intricate search and results display
Hi All,
I am looking for help with a problem I have, my knowledge on Numbers is limited, I have learnt a lot by trial and error but I do not know where to start on this problem.
What I am trying to do is display result from sheet 1 onto sheet 2 when I enter the letters of the REFERENCE into cell C3. Below is an example of the result I am tring to achieve -
SHEET 2
Reference
AB
Reference
SZone
Parts
LZone
Parts
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB12
3
75
2
100
AB12
3
75
2
100
AB13
3
75
3
75
AB13
3
75
3
75
AB14
3
75
3
75
AB14
3
75
3
75
AB15
3
75
1
200
AB15
3
75
1
200
AB16
3
75
3
75
AB16
3
75
3
75
AB21
3
75
3
75
AB21
3
75
3
75
AB22
3
75
3
75
I have searched for AB by entering it in cell B3 on Sheet 2, an auotmatic search has been carried out on Sheet 1 and all the columns have been brought into sheet 2 with the corresponding data and placed under the COLUMN HEADERS. I have over 4000 lines on Sheet 1, although the most result that will ever be pulled through will be 150.
When the data is pulled in I will need to do other calculation in the COLUMNS F, G and H so the data need to only be mapped to COLUMNS A to E.
Also I want to be able to use this spreadsheet on my iPad.
Has anybody got an idea/solution that will help.
Thanks in advance.
IanIan,
We've had a recent report of troubles with large tables in the iOS version of Numbers, so you may want to consider ways to accomplish your goals without the full 4000-row set of data.
I re-read the problem statement in your original post and see that I should have known that you were needing a solution for both platforms. But, I'm still not clear on what part you have figured out and what part you still need help with. We often refer to your second table as a "Breakout Table". There are different ways to program it. My favorite is to add a column to the main table that identifies rows that meet the transfer criteria and assigns them a serial number to help determine where they should go in the second table.
Here's an example:
In the new column on the right edge of the table T1, the expression is:
=IF(ISERROR(FIND(T2 :: $A$1, A)), "", COUNT($F$1:F1))
Note that the first cell in the Aux column is seeded with a zero.
The expression in the body cells of the second table, T2, is:
=INDEX(T1, MATCH(ROW()-1, T1 :: $F, 0), COLUMN())
Note that the search term is to be entered into Cell A1 of table T2.
Does this give you a start?
Jerry -
Need help with BCCode A and resulting unwarned restarts please.
Problem Event Name:
BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF800035F3477
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have already done a chkdsk and chkntfs. No issues were found during either of these processes.
The OS will restart randomly, varying from just after entering the desktop environment to 15 minutes later.
Does anyone have any insight on how to fix this without doing a fresh install?PK
BCC "A" is generally a driver problem read about it here If you can boot the machine (even in safe mode)...
We do need the actual log file (called a DMP file) as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
If you are using Blue screen view, who crashed, or a similar application, don't. They are wrong at least as often as they are correct
Wanikiya and Dyami--Team Zigzag -
Stored procedure with ORDER BY and results to DataTable
I Don't need the result as a bound data for what I'm needing to do here.
I have a datatable created by using a SQL stored procedure, and am using the code below to verify Product data. The stored procedure has an ORDER BY issueDate at the end of it. If I'm transfering the results to a DataTable with a DataTable.SELECT
statement I'm not getting the sorted results that I thought would happen when the DataTable is created. I need the earliest date results and it's getting the first occurance of the product.
Product LotID issueDate
901417 37140 2013-12-02
901418 37140 2013-12-02
901419 37140 2013-12-02
901417 37140 2013-12-01
901418 37140 2013-12-01
901419 37140 2013-12-01
// "yyyy-MM-dd"
string sortOrder = "issueDate";
DataRow[] Check = schemaTable.Select(string.Format("productID = '{0}' AND lotID = '{1}'", product, lotNum), sortOrder);
if (Check == null)
return null;
return (Check.Last<DataRow>());// "yyyy-MM-dd"
string sortOrder = "issueDate";
//DataRow[] Check = schemaTable.Select(string.Format("productID = '{0}' AND lotID = '{1}'", product, lotNum), sortOrder);
DataRow[] Check = schemaTable
.AsEnumerable()
.OrderBy(row => row[sortOrder])
.Select(string.Format("productID = '{0}' AND lotID = '{1}'", product, lotNum), sortOrder);
.OrderBy(row => row[sortOrder]) was listed as an error however I add .AsEnumberable() and then the line .Select shows a syntax error. What should this code look like? -
Help with update issues and resulting boot problems
Ok so I have arch installed and can get through all the updating except for glibc..I know there are countless post on the subject and I have spent the past two days reading through them. I have also broken my system and have done about 15 re-installs trying to get through this. Also, after I update (excluding glibc) and re-boot I get the root device cannot be found error and am dropped to a shell.
What I am asking is, can someone PLEASE give me a straight forward answer on how to fix this stuff...I'm tired of reading and re-installing.
I'd appreciate any help you can give..If you're using the most recent iso, the /lib to /usr/lib move has already been taken care of, so none of those countless bbs threads (or the infinitely superior official advice from the devs) apply any more. Please post the exact commands you are using and the exact error messages you are seeing.
-
Server log having multiple Kerberos Authentication failed events
I my windows server log i can see so many Kerberos Authentication failure Events, Could you please explain why this is happening and how to resolve this?
Hello Friend,
here is the log
Time of Day
Name
Source Country
Destination IP
Destination Country
Destination Port
Event Count
2014-12-10 09
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
2
2014-12-10 08
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
6
2014-12-10 08
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
2
2014-12-10 08
4771: Kerberos Pre-authentication Failed
N/A
Not Reported
N/A
Not Reported
2
2014-12-10 07
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
14
2014-12-10 07
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
1
2014-12-10 06
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
12
2014-12-10 06
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
2
2014-12-10 05
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
16
2014-12-10 05
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
1
2014-12-10 04
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
22
2014-12-10 03
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
8
2014-12-10 03
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
1
2014-12-10 02
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
11
2014-12-10 02
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
4 -
Events problem with (Java and ActiveX)
Hi,
I use an ActiveX component with Java and i've got a problem with events.
Java classes were generated with Bridge2Java (IBM).
In order to manage events I added a listener in my application :
javaMyActiveX = new MyActiveX();
javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
The ActiveX generates two types of events :
- The ones are directly generated by methods.
- The others are generated by a thread.
With MS Products (VB, Visual C++, Visual J++), I catch all events.
With java (jdk 1.4), I catch only events generated by methods.
Can anyone help me.I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.
-
I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN -
Can someone help me see my pictures again in iphoto? 3 weeks ago while uploading a video from iphoto to Facebook, my events thumbnails all disappeared and were replaced by black squares - the event names and number of pics in each remain but when I click on the event, I only get squares where the pics should be - when I click those squares, I get a square with a triangle and an exclamation mark in middle.
Apple had emailed me about defective disks in iMacs so I took mine to the Apple Store and they replaced my HD then reinstalled from my backup via Time Machine - I still cannot see my pics! I tried to reinstall from an earlier Time Machine date - that copied everything and now my HD has double the amount of data but I still cannot see my pictures!
I would be thankful for any guidance on how to retrieve my pictures...
Thank you.iPhoto 6 and later: Rebuilding the iPhoto library
-
Using Event Structures with Array of Clusters
Using LabVIEW 8.5
Hi all,
I'm trying to convert an existing application to one that can be used
through a touch screen. I updated the UI and added an event structure
to listen for mouse ups on controls that require a HMI keyboard or
numpad to show up. Although I've been programming for a while, I'm new
to LabVIEW and am struggling with a problem:
Is there any way to have an event case listen to an event within
arrays? I've seen a few examples on the forums, but they all start with
breaking up the arrays into individual variables. Using the variables,
they build arrays. This seems pretty tedious, and I'm pretty sure I
can't apply it to one of my arrays. Essentially, I just want to know
which cluster in which array the user has clicked on, so I can open the
HMI keyboard or numpad and send the text to that cluster. In my watered down app (Array of Clusters.vi), I've put 3 arrays of clusters and a few stand-alone controls to give you guys an idea of what I'm taking about.
BTW, I'm using the HMI Keyboard and Numpad built by the Beta Community (http://decibel.ni.com/content/docs/DOC-1062) and modified it to add a "Clear" button to the keyboard and numpad. Please let me know if I implemented this in the best way.
Thanks for the help,
Kunal
Message Edited by bhatiak on 08-04-2008 03:55 PM
Attachments:
Array of Clusters4.llb 274 KBMy old tic tac toe example shows how to determine which square of a 2D array has been clicked.
http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=247044#M247044
You probably can adapt some of it for the arrays on the right. If the array can be scrolled, you also need to account for the "indexvals" offset.
The Layers controls is easiest, because you only show one element. Just read the "index vals" property to get the array element and parse the coordinates to get the cluster element.
btw: the small while loop on the right serves no purpose at all and acts just as a CPU burner. You can delete it without any change in functionality. Is there anything else to it?
LabVIEW Champion . Do more with less code and in less time . -
Can I have multiple event structures with the same event cases?
Hello,
I'm doing an application that reproduces the front panel of the HP6675A power supply. To achieve this, I have done a state machine with different states
(initialize, measures, voltage, current, ocp, ov, store, recall, etc). In each state, should have an event structure that catches the events of the buttons, like for example: if the current state is the Voltage mode and the user press the current button the next state will be the Current mode. For this in each state of the state machine should be the same event structure with the same events.
My problem is that the Vi doesn't work properly when I have multiple event structures with the same event cases. There are some possibily to do this, and how? Or is impossible to have multiple events? I have been reading some posts, but I don't find solutions.
Any help is appreciated.
Thank you very much.
Solved!
Go to Solution.natasftw wrote:
Or as others mentioned, make two parallel loops. In one loop, have your state machine. In the other, have just the Event Handler. Pass the events from the handler to the state machine by way of queues.
A proper state machine will not need the second loop. The "Wait For Event" or "Idle" state (whatever you want to call it) is all you really need in order to catch the user button presses. The setup is almost there. Maybe add a shift register to keep track of which state to go to in the case of a timeout on the Event Structure.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Creation of an event : problem with the container
Hi Gurus,
I'm facing a problem in creation of an event.
I'm in SAP ECC 6.0 for a migration project from 4.6B
In an ABAP program I'm trying to create an event in order to launch a workflow.
1st step : Set datas in the container -> In INTERNAL_TABLE I have 5 lines.
swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container.
2nd step : Create an event :
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = w_wf_objtype
objkey = w_wf_objkey
event = w_wf_event
creator = applicant
start_recfb_synchron = 'X'
TABLES
event_container = event_container
EXCEPTIONS
objtype_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
WRITE sy-subrc.
ENDIF.
Now when I check my container with SWI2_FREQ I see that INTERNAL_TABLE has just one ligne, the rest disapears.
I have this problem only when I set an internal table in an container
I don't know why, but it perfectly works on 4.6B.
Thanks a lot
WalidHi,
I dont see a point in having this statement
swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container. Infact it is not needed !!
SWE_EVENT_CREATE like any other FM, take a
lt_var type standard table of SWCONT.
ls_var type SWCONT.
fill your ls_var with all fields and append it to lt_var each time and pass lt_var to event_table of SWE_EVENT_CREATE. It should work !!
However, suggested way is to use SAP_WAPI_CREATE_EVENT instead of SWE_EVENT_CREATE from ECC 5.0 onwards. There are fe concerns with SWE_EVENT_CREATE mainly with respect to commit and persistancy. Better we should use SAP_WAPI* as much as possible from ECC 5.0.
Try above and Good Luck !!
Regards
Krishna Mohan
Maybe you are looking for
-
Exception cx_os_object_existing not thrown by Create_Persistant
DATA: lr_agent TYPE REF TO zca_pers_rules, lr_pers_rule TYPE REF TO zcl_pers_rules. TRY. lr_agent = zca_pers_rules=>agent. lr_pers_rule = lr_agent->create_persistent( i_ruleid ). * Check if rule already exists CATCH cx
-
Internet download speed slows to 20% of normal every night at about 8:30 P.M. Pacific Time
My internet download speed, which averages just over 5 Mb/s most of the day, slows to about 1 Mb/s every night at about 8:30-9:00 P.M. Pacific Time and lasts for a few hours. It is consistent and constant so random equipment or line problems are un
-
Hi, I can't figure out how to make a simple copyright symbol. I looked and looked for the Keyboard Viewer in the Preferences>International, but couldn't find it, or anything like it. I just want something like Key Caps. Thanks, Allan PS BTW I'm again
-
Do you know when it will be possible to mirror a MacBook Air on apple tv2
Do you know when it will be possible to mirror a MacBook Air on apple tv2
-
How to manage security on Fusion Applications webclient
Hello, I have build a Fusion Applications Webclient based on a Java Proxy generated from WSDL. I have successfully deployed & running this project on my local Weblogic server. The project provides an additional custom use-case. (To extend the functio