"Kerberos" authentication failed while trying to access EMC or EMS

Salam,
I have successfully installed Exchange 2010 SP1 on a transitional environment, the installation went smooth without any problem and I've done most of the trasitioning configuration from Exchange Server 2003 to Exchange Server 2010.
Currently we're in the process of moving the mailboxes, but I've come across a problem recently which stopped all my work and I can no longer commence with this transition unless its solved.
Sometimes when I try to access EMC or EMS I get the hereunder error:
The following error occurred while attempting to connect to the specified Exchange server 'afhmail.arabfinancehouse.com.lb':
The attempt to connect to http://afhmail.arabfinancehouse.com.lb/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed
with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
I've read most of the articles found on the internet including
http://msexchangeteam.com/archive/2010/02/04/453946.aspx to try to troubleshoot this problem but nothing has worked so far, I tried removing Win RM IIS extensions as well then adding them again with a restart and nothing. I tried the Kerbauth dll removal
also nothing and the problem keeps to occur and the situation is not stable.
Also I read in a KB article somewhere that if we have multiple domain controllers a single domain controller should be assigned on the Exchange Server (Organization Configuration, Server Configuration, Recipient Configuration) so I assigned the PDC to be selected
by those configurations at startup, yet I am still facing the same problem.
Again I emphasis that the problem comes and goes, at a time I can access EMS and at another is just gives me the Kerberos error.
Thank you very much in advance,
Kindest Regards.
Abdullah Abdullah

Hi Abdullah,
Can you open the EMS?
If yes, please run the WinRM QC and post the results here.
If possible, please use another admin's account to log on to Exchange to try to open EMC.
Frank Wang
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Task Sequence Fails while trying to access a folder in PXE

Hello Guys,
I am facing issues while PXE. It fails with below error.
Logs from server :
Severity               Type      Site code             Date / Time
System Component        Message ID        Description
Error      Milestone                    2/4/2014 9:49:11 AM
Task Sequence Engine   11135    The task sequence execution engine failed executing the action (DiskPart DataDisk) in the group (Install Operating System) with the error code 2147942402 Action output: T=80070047 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,148)
Failed to access the share \\server.org\SMSPKGE$\PCK000AA\ with network access account !sAccessibleSource.empty(), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2392) GetAccessibleLocation(pszSource,
saResolvedPath, sSourceDirectory, dwFlags, hUserToken), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3168) TS::Utility::ResolveSource(pszPkgID, sPath, 0, hUserToken, sUserName.empty() ? NULL : sUserName.c_str(), sUserName.empty()
? NULL : sUserPassword.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\runcommandline.cpp,395) cmd.Execute(pszPkgID, sProgramName, dwCmdLineExitCode), HRESULT=80070002 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\main.cpp,385)
Failed to find an available source location Failed to resolve the source for SMS PKGID=PCK000AA, hr=0x80070002 Install Software failed to run command line, hr=0x80070002. The operating system reported error 2147942402: The system cannot find the file specified.
SMSTG log from PC where it fails :
Failed to connect to "\\server.ORG\SMSPKGE$\PCK000AA" (71)
Task Sequence fails only when acccessing one folder and below steps have been tried.
- Network access account is configured and its working fine for all other secondary site
- NAA is having access to folder.
- NAA is added to Server Local Admin Access Group.
- Deleted folder and Replicated from central
- Granted everyone access to folder.
It works only when other Admin Account is updated in place of existing NAA details on primary server. However the same NAA is working fine on all Primary and Secondary servers. Issue is only with one secondary server.
Its very strange issue!!!
Waiting for a solution.
Mukhyaprana

0x80070047 = "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept."
You must have some non-standard policy or restriction applied to the system hosting the share.
Jason | http://blog.configmgrftw.com

Exchange 2010 sp2 emc initialization error using "kerberos" authentication failed

We use exchange 2010 SP2.
We have 2 management stations, both w2k8 R2 SP1.
I have one mangement station on which the emc and ems works ok.
On the other management staiton (which is also in another ad site) the emc and ems don't work.
I get the following error message : The attempt to connect to
http://fqdnCasServer/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
I have checked the time on the management station and on the exchange server and this is ok.
It is not a permissions issue because the user functions ok on the other management station.
On the bad management station I can open the emc once and after a minute I get an error message and the message access denied. From then on I can't connect any more.
What am I doing wrong?
Anyone any tips?
Thanks,
JB

This is what I get in the eventlog of the bad management station.
Log Name: MSExchange Management
Source: MSExchange CmdletLogs
Date: 1/10/2012 11:39:27
Event ID: 6
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: Server.domain.com
Description:
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-ExchangeServer
{Identity=Servername}
Domain/ou/ou/ou/ou/username
Exchange Management Console-Local
3080
22
00:00:00.3593888
View Entire Forest: 'True', Configuration Domain Controller: 'FQDN DC', Preferred Global Catalog: 'FQDN DC', Preferred Domain Controllers: '{ FQDN DN }'
Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'FQDN MGMTSTATION' couldn't be found on 'FQDN DC'.
Context
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="MSExchange CmdletLogs" />
 <EventID Qualifiers="49152">6</EventID>
 <Level>2</Level>
 <Task>1</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2012-10-01T09:39:27.000000000Z" />
 <EventRecordID>11</EventRecordID>
 <Channel>MSExchange Management</Channel>
 <Computer>FQDN MGMT STATION</Computer>
 <Security />
</System>
<EventData>
 <Data>Get-ExchangeServer</Data>
 <Data>{Identity=MGMT STATION}</Data>
 <Data>domain/ou/ou/ou/ou/username</Data>
 <Data>
 </Data>
 <Data>
 </Data>
 <Data>Exchange Management Console-Local</Data>
 <Data>3080</Data>
 <Data>
 </Data>
 <Data>22</Data>
 <Data>00:00:00.3593888</Data>
 <Data>View Entire Forest: 'True', Configuration Domain Controller: 'FQDN DC', Preferred Global Catalog: 'FQDN DC', Preferred Domain Controllers: '{ FQDN DC }'</Data>
 <Data>Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'FQDN MGMT STATION' couldn't be found on 'FQDN DC'.</Data>
 <Data>Context</Data>
 <Data>
 </Data>
</EventData>
</Event>

Exchange Management Console couldn't start with Kerberos authentication failed

When I was making changes to Client Access\owa settings, chaning from Basic authentication to Form authentication (upn name) then changed to Basic again. It was ok after changing to Form authentication but moment after changing back to Basic, I couldn't
no longer access owa (blank page when one vertical line) and in Exchange Management Console, I got "Initialization failed" - The following error occured while attempting to connect to the specified Exchange server 'sgp-ex1.mydomain.com':
The attempt to connect to http://sgp-ex1.mydomain.com/powershell using "Kerberos" authentication failed: Connecting to the remote server failed with the following error message: The WinRM client cannto process
the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help topic.
I tried the troubleshooting tool from Exchange team blog:
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx. It give 3 possible causes for this error: 1. WSMan module entry is missing from global module section of c:\Windows\System32\InetSrv\Config\ApplicationHost.config; 2. Kerbauth module shows
up as Managed module or has been loaded in the Default Web Site Level; 3. The Path of the Powershell virtual directory has been modified.
I checked carefully, all the 3 causes do not apply to my situation as WSman entry is in order, the Kerbauth is native and local and the path of Powershell virtual directory is correct.
I find that in Application log, there are Event 2297 and 2307 dumped at the time of failure:
The worker process for application pool 'MSExchangeSyncAppPool' encountered an error 'Confiugration file in not well-formed XML' trying to read configuration data from file '\\?\C:\inetpubl\temp\apppools\MSExchangeSyncAppPool\MSExchangeSyncAppPool.config',
line number '2'. The data field contains the error code.
Help is very much appreciated.
Valuable skills are not learned, learned skills aren't valuable.

Unfortunately, all the links you provided didn't help.
The first link contains 3 methods:1 Removing WinRM feature and reinstalling. 2 Rename the web.config file in location C:\inetpub\wwwroot 3 Have you installed Microsoft Dynamics CRM 4. I?
As my server is Windows 2008 R2, the first method does not apply. I couldn't find any web.config in c:\Inetpub\wwwroot. The web.config however is found in many times in .netframework and winsxs directories. The 3rd method doesn't apply as I don't have CRM.
The 2nd link contains 3 possible causes. The first 2 are the same as the ones I mentioned in my initial post. I couldn't verify the last cause because when open Exchange Management Shell, I got this error: [sgp.ex1.mydomain.com] connecting to remote server
failed with the following server failed with the following error message: The WinRM client cannot process the request, it cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalide. For more
information, see the about_Remote_Troubleshooting Help topic.
I do not think the user is not remote powershell enabled because the problem happened suddenly, while I was making changes to Authentication settings of OWA(default) in Client Access in Exchange Management Console. If the user account is not remote powershell
enabled, then I couldn't event connect to EMC in the first place.
The last link didn't help because I could open up modules under PowerShell virtual directory in IIS.
I think since the event log is saying MSExchangeSyncAppPool.config and DefaultAppPool.config not well-formed XML, that might be a clue.
In the event id 2307 this is the message:
The worker process for application pool 'DefaultAppPool' encountered an error 'Configuration file is not well-formed XML
' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\DefaultAppPool\DefaultAppPool.config', line number '2'. The data field contains the error code.
Valuable skills are not learned, learned skills aren't valuable.

MSS error while trying to access Adobe forms

Hi all
We are using EP 7 sp14. Delpoyed ESS/MSS BP SP 14. while trying to access certain functionalities in MSS which make use if standerd Adobe interactive forme through portal its coming up with the following error.
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
I had done few settings in Visual Admin in
1. server >services>web services security>web services clients>sap.com>tcwdpdfobject>com.sap.tc.webdynpro.adsproxy.Adsproxy*configPort_Document.
2. In default URL gave : http://portalserver:port/AdobeDocumentServices/Config
3. Authentication:Basic Authentication : gave username:ADSUSERpwd which is set in the backend.
4. In Deploy stopped and started the application.
Also in Destinations -> Created a new HTTP and set the URL pointing to the backend.
Is there any additional configuration to be set on the Portal side.
Regards,
Sasha.

Got corrected with changing data-type for a property in the definition file.

Error occurred while trying to access framework

Did some changes to master rule collection u2013 switched from default desktop to light desktop u2013 and when trying to go back, something went wrong!!!
Error occurred while trying to access framework page: "pcd:portal_content/com.sap.pct/every_user/general/defaultAjaxframeworkContent/com.sap.portal.afpDesktop/frameworkPages/com.sap.portal.AFPpage",The object does not exist or you are not authorized to access it.If this problem persists, contact your system administrator.
Activated SAP* user and logged in, but still the same issue!
Tried also the following url
http://myhost:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fcom.sap.portal.frameworkpage
with the response:
Error component failed , reason : Access is denied: pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.frameworkpage - user: Guest, Original Exception : Access is denied: pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.frameworkpage - user: Guest,
What next to do?

Dear Customer,
Try to access the Default Framework using the following paterns:
Default framework page: /irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fcom.sap.portal.frameworkpage
Desktop & Display rules: /irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsystem_admin!2fsystem_admin_role!2fcom.sap.portal.system_admin_ws!2fcom.sap.portal.themes!2fcom.sap.portal.portalDisplayRules
This can be used whenever the desktop assignment to the user which you are logging on with has been removed somehow. If this occurs, the user won't be able to see any content after logging on to the portal and the following error will be shown: "Error occurred while trying to access desktop: "portal_content/themes/sap_chrome". The object does not exist or you are not authorized to access it. If this problem persists, contact your system administrator."
If this occurs, you can use the address above to restore the desktop rules at least for your user so that you can log on to the portal again with no problems.
Best Regards,
Fabio Sarmento

Error occurred while trying to access desktop

Dear friends, 
I'm working with Composition Environment 7.1 trial version. 
I read some other related posts, but they don't apply to our situation. 
The problem is: while trying to login into the Portal (with any user) the following error message is displayed: 
Error occurred while trying to access desktop: "portal_content/every_user/general/defaultDesktop". The object does not exist or you are not authorized to access it. If this problem persists, contact your system administrator. 
The problem began when I deleted an Iview (generated with Visual Composer). 
When I go to the NWA developer traces I find the following stack trace: 
Exception when calling ObjectFactory for portal_content/administrator/super_admin/main_rules
[EXCEPTION]
javax.naming.NamingException
at com.sap.portal.pcm.GeneralSemanticsSrv.getDefaultContext(GeneralSemanticsSrv.java:194)
at com.sapportals.portal.resolving.sl.RulePcmObjectFactory.initialize(RulePcmObjectFactory.java:169)
at com.sapportals.portal.resolving.sl.RulePcmObjectFactory.getObjectInstance(RulePcmObjectFactory.java:68)
at com.sap.tc.pcd.proxies.JndiProxy.getObjectInstance(JndiProxy.java:69)
at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:962)
at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:742)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:121)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1821)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1807)
at com.sapportals.portal.resolving.sl.PcmRuleStorage$Loader.load(PcmRuleStorage.java:465)
at com.sapportals.portal.resolving.sl.PcmRuleStorage.load(PcmRuleStorage.java:160)
at com.sapportals.portal.resolving.CResolverService.getRulesInternal(CResolverService.java:314)
at com.sapportals.portal.resolving.CResolverService.resolve(CResolverService.java:208)
at com.sap.portal.desktop.DesktopService.getDesktopUrl(DesktopService.java:835)
at com.sap.portal.desktop.DesktopService.getDesktopUrl(DesktopService.java:682)
at com.sap.portal.desktop.DesktopService.getAndHangDesktop(DesktopService.java:494)
at com.sap.portal.desktop.DesktopService.getTheme(DesktopService.java:1414)
at com.sapportals.portal.prt.service.laf.LAFService.getCurrentTheme(LAFService.java:1074)
at com.sapportals.portal.prt.service.laf.LAFService.getCurrentRuntimeTheme(LAFService.java:1132)
at com.sapportals.portal.prt.service.laf.LAFService.getThemeToUseIdAndVersion(LAFService.java:1720)
at com.sapportals.portal.prt.service.laf.LAFService.getThemePartURL(LAFService.java:987)
at com.sapportals.portal.htmlb.HTMLBService.onHeadTagBegin(HTMLBService.java:138)
at com.sapportals.portal.htmlb.HTMLBService.doDocumentHook(HTMLBService.java:126)
at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:111)
at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:111)
at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:111)
at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:133)
at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:290)
at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:828)
at com.sap.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:613)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:203)
at com.sap.portal.prt.dispatcher.DispatcherServlet.service(DispatcherServlet.java:133)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:144)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doCached(RequestDispatcherImpl.java:517)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:356)
at com.sap.portal.navigation.Gateway.service(Gateway.java:145)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314 
I'll appreciate any comments or suggestions. 
Have a nice day, 
Manuel
Edited by: manudubinsky on Sep 23, 2009 4:30 PM
Edited by: manudubinsky on Sep 23, 2009 4:55 PM
Edited by: manudubinsky on Sep 23, 2009 5:15 PM

Hello there,
Another option is to create a sap* user( then no other user can login) create another user and try login.
The steps are given here
http://wiki.sdn.sap.com/wiki/display/EP/ToResetAdministratorPasswordthroughConfigTool
But I guess CE dont have config tool. so you will have to do the same steps at NWA.
If all these fail, I am afraid only option is to reinstall the Portal.
Regards,
Vivek Nidhi

Remote PowerShell Connection to Lync Server With Kerberos authentication Fails

Hi everyone ,
Remote PowerShell to Lync Server With Kerberos authentication Fails .. Is there any reason for not being able to connect when authentication specified as Kerberos . But exactly same code works when Authentication is specified as "Negotiate"
E.g :
Error -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Kerberos
[serverName.lync.com] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. The authentication mechanism requested by the client is not supported by the server or unencrypted traffic is disabled in
the service configuration. Verify the unencrypted traffic setting in the service configuration or specify one of the authentication mechanisms supported by the server. To use Kerberos, specify the computer name as the remote destination. Also verify
that the client computer and the destination computer are joined to a domain.To use Basic, specify the computer name as the remote destination, specify Basic authentication and provide user name and password. Possible authentication mechanisms reported by
server:   Digest Negotiate For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Works -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Negotiate

Hi,
Please double check if Windows Update is the latest version, if not, please update and then test again.
Please also ensure that the workstation you are using has network access to the Certificate Authority that signed the certificate.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

An error occurred while trying to access the service?

I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
My subscription is still valid, so I don't see why the problems? Has anyone else had this issue and managed to fix it? I get the error message regardless of whether I'm trying to convert to Word or Excel.
Any ideas greatly appreciated!!
Thanks
Sophie

Hi SHurcs,
I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
To get us started, here are a few things that you can try:
In Reader, sign out, and then sign back in.
Use a supported web browser: http://www.adobe.com/acom/systemreqs/
Clear the browser cache.
If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
Best,
Sara

An error occured while trying to access the service

i'm continually having issues with trying to convert my files from PDF to excel. I keep on getting the error message "An error occured while trying to access the service" with no real explanation as to what is wrong. I've tried several times on several different computers, logging on and off, changing users...same message everytime. I have a time sensitive project to complete, and can't get it done if this conversion can't be done. HELP!

Hi J,
Here are a couple documents that may assist you:
'Getting started' guide
FAQ
Let me know if those help!
Kindest regards, Stacy

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator]

"error while trying to access the service"

I am trying to convert a pdf file to an excel file. I get a completely unhelpful message that says "error while trying to access the service" .
What does this mean and how do i fix it?

Hi sd433m,
Thank you for posting on the Adobe forums. If you are already subscribed to the service, kindly try the steps mentioned below.
1) Open Adobe Reader Edit>preferences
2) Go to Adobe Online services>change the email address to the one you have subscribed the service with
3) Go to identity> change the email address there as well
4) Click OK
5) Restart the Adobe Reader and try to access the service again.
If you have not subscribed to the service please do that as, we do not offer trial for Create PDF.
Thanks,
Vikrantt Singh

While trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '

while trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '
And while trying to unlock screen after lock , slide not working 'slide to unlock'

Hello there, charialji.
The following Knowledge Base article offers some great steps for troubleshooting your issue:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file from PDF or to PDF, I get the message "An error occured while trying to access the service. What do I need to do to access the service paid for?

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service". What do I need to do to get access to the service I have paid for?

Hi DeaconTomColorado,
Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
Best,
Sara

"Kerberos" authentication failed while trying to access EMC or EMS

Similar Messages

Maybe you are looking for