Kerberos only for or with OID

Hi all,
I would implement the authentication the user with Kerberos in Oracle Advanced Security. But in the Documentation I found the configuration steps for OID. Is this feature only for OID?
Regards,

Hi all,
I would implement the authentication the user with Kerberos in Oracle Advanced Security. But in the Documentation I found the configuration steps for OID. Is this feature only for OID?
Regards,

Similar Messages

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • How to make form field read only for users with certain permissions

    We need to make two form fields read only for users with certain permissions. Kindly guide me on how to do this in Infopath. I searched and there is an option to disable to the column, but no option to select user permissions. 
    Please give your suggestion on this. 
    thanks.

    Hi,
    See the link below:
    http://info.akgroup.com/blog-0/bid/69277/InfoPath-Restrict-visibility-to-users-in-a-SharePoint-Group
    Here you can add the fomatting action on the field to disable the field if those users belong to certain Sharepoint group (does not matter the permission levels though). Hope it helps.
    Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

  • Solaris 10 5/08 live upgrade only for customers with serviceplan ?

    Live upgrade fails due to missing /usr/bin/7za
    Which seems to be installed by adding patch 137322-01 on x86 according to release notes http://docs.sun.com/app/docs/doc/820-4078/installbugs-114?l=en&a=view
    But this patch (may also be the case for Sparc patch) are only available for customers with a valid serviceplan.
    Does this mean that from now on its required to purchase a serviceplan if you would run Solaris 10 and use the normal procedures for system upgrades ?
    A bit disappointing ...
    Regards
    /Flemming

    Live upgrade fails due to missing /usr/bin/7za
    Which seems to be installed by adding patch 137322-01 on x86 according to release notes http://docs.sun.com/app/docs/doc/820-4078/installbugs-114?l=en&a=view
    But this patch (may also be the case for Sparc patch) are only available for customers with a valid serviceplan.
    Does this mean that from now on its required to purchase a serviceplan if you would run Solaris 10 and use the normal procedures for system upgrades ?
    A bit disappointing ...
    Regards
    /Flemming

  • Bluetooth Microphone Only, for use with wired headphones - possible?

    Hi all,
    Is there such a device as a bluetooth microphone, and could i connect it to the iphone for voice, with the audio being routed through my wired headphones?
    I would like to continue using my audiophile headphones, but want to avoid a wired iphone mic adaptor, as the extra cabling would be annoying to say the least.
    Cheers
    J

    I had an iphone 1G adapter for audio that when connected it only served audio to the headphones and the inside iphone microphone was still working and receiving my voice without the need for an externatl microphone.
    The adapter broke so I bought a new one and I updated to firmware 2.0 (from 1.1.4) the same time. The new adapter did not do the same thing, but I cannot decide if this is because of the firmware upgrade or the different new adapter.
    Hope it helps.
    I also want to plug headphones and use the in-built mic.
    If anybody knows the way please tell.

  • Export dialog only for use with teleprompter?

    I tried the official Story Plus teleprompter and didn't care for it (plus it has the same problem I'm having now).
    HOW do you export dialog only from Story Plus for use with a teleprompter?
    I've exported a TXT document and it included everything.  Additionally, it kept the formatting, so I have to go into a text editor and remove all the spaces.  Otherwise my dialog is a mess in the prompter.
    Any thoughts on how to get this working?
    Thanks,
    Paul

    If you want to export just the dialogs from the story, you can try out Breakdown Reports (Authoring view : Production - > Breakdown Reports). You can try "Character..." or "Custom Report..." to see if it serves your purpose. It will generate csv file for you.
    Thanks

  • RDS - External connections only for those with SSL Certifcate - how to accomplish that?

    Hi,
    we have a lot of partners for sales purposes and they need connect to our servers due to ERP access and then input 'sales order' and etc; there is a way to only accept connections from Computers/Tablets with enabled/installed an specific SSL?
    If so, should we buy SSL from a valid external C.A for the server and clients? or just for Clients? or just for the server?
    * I found similiar question but too old: https://social.technet.microsoft.com/Forums/windowsserver/en-US/a254f1d0-43dd-4be3-8fe5-90f9fc97904a/securing-rds-with-ssl-certificate?forum=winserverTS#0f663d6e-aa58-4ad0-a315-b88bb3ec8c27
    tks,
    Renato P

    Hi,
    If you are looking to connect to a particular PC on your home network from outside then follow the steps
    There are six steps you'll need to follow to set this up. Each one is explained in detail below.
    Allow remote connections to the computer you want to access.
    Make sure Remote Desktop is able to communicate through your firewall.
    Find the IP address of the computer on your home network that you want to connect to.
    Open your router's configuration screen and forward TCP port 3389 to the destination computer's IP address.
    Find your router's public IP address so that Remote Desktop can find it on the Internet.
    Open Remote Desktop Connection and connect.(Type in your public IP + the forwarded port to acces the desired PC- public IP : port  )
    If you have already done this and all you want is to decide who access it then give user permission in
    Remote Desktop Users Group.
    Apart using SSL cert you can limit the user access using your firewall/router.
    SSL certificate is required for your server alone.

  • ESS - Own data dumps. Only for employees with PERSG "L"

    Some employees are getting a "Serious error" in own data in ESS. 
    I get runtime error OBJECTS_OBJREF_NOT_ASSIGNED_NO in  function FUNCTION hrxss_per_cleanup.  The error  is mentioned several times in the forum:
    Done several analysis, and found the following:
    I registered 3 identical employees with different PERSG/PERSK:
    1.  1/01
    2.  L/66
    3.  V/01
    I connected my portal user to the 3 different employees and found:
    1. Works fine
    2. Dumps
    3. Works fine
    So now my theoriy is that somehow the value "L" is misinterpreted by the system.
    Can anyone tell me if this can be the case, and if so, if it is a product issue? 
    I don't know where to look for the error (esp. since I am not a Java person)
    Any help appreciated
    Kirsten

    The problem was that the person belonged to a payroll area where there was no admin.record.  (Payroll not run for this employee).  This causes Own Data to fail, as it is checking the status of admin record - probably to decide eg. when bank can be updated.

  • I live outside of the US and I dont have a US credit card but lots of itunes credit. Is there any way to get itunes match or is it only for people with US credit cards

    How do I get I tunes match without a us credit card

    iTunes in the Cloud, iTunes Match, and iTunes Radio availability
    Once you determine if iTM is available in your country of residence then you'll need a credit card drawn on a local bank and an address to subscribe to iTunes Match.

  • Only for Material if Contract Exist - Create PO Automatic (ME59N)

    Dear Gurus,
    When the inventory planned converts a planned order (which comes from MRP output) to PR,  a validation should take place, whether a contract exist for the Material? If contract exist. Purchase order creation should be automated.
    How to achieve this requirement in Configuration settings, only for materials with contract existing?
    Please advice, we are not maintaining any Source list or Info record.
    In order to achieve the above business needs, how to start and how to complete this.
    Regards
    RS

    Dear gurus,
    I have made a contract and maintain source list in ME32K, then maintain Vendor & Material master as Auto PO.
    Now when i try to create PO through ME59N, the system is generating PO automatically. BUt the PO has a Free indicator ticked, which means PO with ZERO value.
    How to Untick the Free indicator, when a PO is generated in background through ME59N or ME59
    Regards
    RS
    Edited by: RS on Dec 30, 2009 10:43 AM

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • Invoke wallet key for use with DBMS_CRYPTO package

    Hello,
    I intend to use DBMS_CRYPTO and use personal key that is already stored in a wallet (file). Which steps must i take to bring this key as a parameter to DBMS_CRYPTO.ENCRYPT for encypting BLOB. Al examples i found till now use only self created keys.
    Many thanks to enyone who can help me with an advice.
    Ernest

    Sorry, but you're in the wrong forum (as this one is only for issues with the SQL Developer tool). You'll get more answers in the SQL And PL/SQL forum.
    Have fun,
    K.

  • How add Authorization check for user with assigened role for t.code-MIR4

    Hi All,
    Regarding authorization how to check authorizations check for user whith assigned roles for the t.code MIR4  using ABAP.
    In Detail:2)     All users are allowed to go to MIR4(invoice number), But ONLY for users with role: MM_RELEASE_INVOICE can proceed to do the posting.
    suggest me...
    Thanks,
    srii..

    Hi Sri ,
    first u need to find out  in which user rules u are using this object , after that if u want to restrict users then remove create/change values from that object values .
    make use of Tcode SUIM to find out all roles which are using this Object.
    or
    ask ur basis guy to remove authorizations to create/change....
    regards
    Prabhu

  • Use 'iControl for GarageBand' with iMovie

    M-Audio's iControl is intended only for use with GarageBand: but it is possible to make it work with other programs to an extent. Here is a way of using the transport buttons and jog wheel with iMovie. (Tested with iMovie 4 but I assume it should work the same with later versions).
    Download MIDIstroke from
    http://www.charlie-roberts.com/midiStroke/
    (it's free).
    On the left in the three columns num/chn/value enter the values separated by / below, then map each set on the right side by entering the text as shown and ticking the 'shift' box where indicated
    24/1/1 - RIGHT
    24/1/127 - LEFT
    109/1/127 - SPACE
    110/1/127 - RIGHT [SHIFT]
    108/1/127 - LEFT [SHIFT]
    106/1/127 - SPACE
    107/1/127 - HOME
    111/1/127 - END
    Connect the iControl, run MIDIstroke and iMovie.
    Now the jog wheel will jog the movie backwards or forwards a frame at a time: however if you move it too fast it will fail to respond at all.
    The transport buttons are mapped as follows:
    Record and play will both toggle start and stop as appropriate in the program.
    Fast forward and back will make a single jump of ten seconds for each press (there is no repeat when held down).
    Go to beginning does just that, and the cycle button goes to the end.
    It's not ideal but if you already have an iControl and you don't have a mouse with a scroll wheel (and a driver for mapping to keystrokes), or something with a jog wheel, this might make editing a bit easier.
    You could use MIDI Monitor (also free) from
    http://www.snoize.com/MIDIMonitor/
    to tell you what commands are being sent by the various iControl buttons and knobs and then use those to map any way you want in any program -the only caveat is that you can't have different commands in different programs: and obviously there has to be a keystroke to do whatever it is you want.
    20 inch G4 iMac   Mac OS X (10.3.9)  

    Roger,
    this is grrrreat!
    I really LOVE such workarounds!!
    using a midi-controler for video-editing.. wowy...
    .. but on my desk, the M-Audio would be way too big, so I like to use this device:
    http://www.contourdesign.com/shuttlepro/

  • Why EPCM.donavigate doesnt work for Iview with isolation type embedded

    I am using EPCM.donavigate in JavaScript  in portal jspdynpage to navigate to different page. This works fine when my iView  isolation method is URL but it doesnt work when it is embedded. Am I missing something here? some import?
    Regards,
    Nitesh

    Hi,
    In Javacript of Portal jsp page, we are calling EPCM.doNavigate method  as below:
       function callfunc(obj,externalLink,rid,portalPageURL,InvalidLink)
                   return EPCM.doNavigate('ROLES://' + obj)     
    Final URL look something like this...
    portal_content/com.sap.pct/com.sap.prod_fld/com.sap.roles/com.sap.rol_career/com.sap.wks_1_1/Folder_2/com.sap.pag_1_1_2
    This Code works only for Iviews with URL Isolation but doesnt work with Embedded Iviews as my Page which contains this Iviews is also Embedded and Desktop is also embedded.

Maybe you are looking for