KERN-EXEC ERRON IN MY NOKIA 9500

I JUST RECENTLY BOUGHT NEW NOKIA 9500. I LOVE THIS MOBILE TO USE.
BUT I GOT VEY BIG PROBLEMS IN MY COMUNICATOR.
I AM NOT ABLE TO CALL ANY ONE FROM MY CONTECT LIST FROM OUT SIDE OF THE PHONE. AND ALSO NOT ABLE TO CHECK MISSED CALL, RECENT CALL, AND DIAL CALL. EVEN I AM NOT ABLE TO READ MESSAGE FROM. I CAN`T DO ANYTHING FROM MY COMINICATOR FROM OUTSIDE KEYPAD.
I HAVE TO OPEN COVER AND HAVE TO WORK WITH THE PHONE EVERYTIME WITH INSIDE KEYPAD.
IT SHOWS BELO ERROR.......
1) PROGRAM:cuicuinotes101f821
Reason code:kern-exec
reason number:3
2) program:cuiprofile1101f859
reason:kern-exec
reason number:-3
i am very sad now. you guys pls help me what to do?
mithun

Sounds quite serious. I'd suggest taking a backup of your phone, format it, then restore the backup - that should sort it out.
To format the communicator, remove and then replace the battery. Then when you see the word Nokia in blue on the inside screen, hold down the ctrl, shift and F keys simultaneously. After the word Nokia disappears and before the Nokia handshake logo appears, you should be given the option to completely format the device .
ALL DATA on the phone memory will be completely erased and the original settings restored so make sure you have any important data backed up.
If you didn't get the option to format the device before the Nokia handshake logo appears, repeat the same process again and hopefully you will receive the option before this logo appears.

Similar Messages

  • Kern-Exec Error when sending emails from 9500

    Hi There
    My first post so hopefully someone may be able to help and I'll try to help others if I can.
    Just recently I have been unbale to send emails from my Nokia 9500. I don't think I've been doing anything differently but I keep getting KERN-EXEC error reason No 3, when I try to send email messages. Strange that I'm able to receive messages ok though.
    I looked at some of the other posts and followed mobile manic's advice for other KERN-EXEC errors. I backed up the phone contents to the PC, restored the phone to default settings and then re-loaded all the backed up stuff.
    Sadly, I still get the KERN-EXEC error message when I try to send emails. It seems to conect to GPRS ok but then the message just sits in the Outbox waiting to go but never does. So when I close the program (after leaving it for a few mins) that's when I get the KERN-EXEC error message.
    Any help greatly appreciated.
    Cheers
    Sparky007

    Hi there Sparky!
    I don't suppose you tried to send an email before you restored the backup did you? Sometimes backups can back up the problem as well which is a bit annoying.
    If you can send an email ok before restoring the backup then the problem must be embedded in the backup... otherwise the only thing I could suggest is contacting a Nokia engineer to get them to have a look at it.
    Not sure what else to suggest... good luck though and let us know how you get on.

  • E51 Kern-Exec 0 Erorr

    Hi to everyone! I upgraded my E51 to newest firmware (400.34.011) using nokia Nokia Software Updater and after that run in trouble with Kern-Exec 0 Error. Have absolutely no idea why and when it shows up. Mostly I get it when I just lock keypad.
    Reseting settings or reinstalling the same firmware won't help. Any solutions?
    Solved!
    Go to Solution.

     try option #2 do a back up before you proceed. reinstall firmware and rigth after do a reformat and see if it helps. you can always resort to option 3 if none of the stuff does not work.
    1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for all operations listed here is 12345
    2. *#7370# - Reformat your phone
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • 9300 showing MAIN Kern - Exec

    hi, I love my 9300 and proud to be 1 of its user.
    today morning my phone is just getting rebooted.
    not able to go to the main menu too..
    It is showing as
    MAIN
    Kern - Exec
    Reason - 3
    I have reset the handset couple of times but in vain...
    I had been to the nokia care centre, they told me as my handset is made in findland, 95% of chances are the handset getting flushed by the engineer...
    can any body plsssss help me by telling what is the next thing i should do for starting of my handset...
    regards
    Karthikeyan Iyer

    I don't think installing Pc Suite has anything to do with powerpoint in the phone and kernel error you are getting.
    Did the powerpoint presentation came from the PC originally (so it is Microsoft Powerpoint format?). The conversion to Symbian format is done in the phone, not by PC Suite. The kernel error may be due to conversation failing.

  • KERN-EXEC 3 Error

    I've tried to open a PowerPoint presentation on my Nokia 9300 but crashes and generates a "KERN-EXEC 3" error.
    I've reformatted the phone and reinstalled PC Suite (version 6.81) to see if this fixes the problem but no joy.
    Any ideas how to fix this?

    I don't think installing Pc Suite has anything to do with powerpoint in the phone and kernel error you are getting.
    Did the powerpoint presentation came from the PC originally (so it is Microsoft Powerpoint format?). The conversion to Symbian format is done in the phone, not by PC Suite. The kernel error may be due to conversation failing.

  • E51 Application closed: Contacts KERN-EXEC 3

    Hi,
    recently I get often this problem: "Application closed: Contacts KERN-EXEC 3".
    Scenario:
    - I go to Contacts,
    - I search for a contact,
    - I press to open it and then stays for 10sec aprox. until open it. And if I choose to go back I got that error.
    Mention: not everytime I got this problem. Lets say 5 from 10 times.
    Any suggestions?

    I have an E60 and an E51 and I never had this problem but it is a 'panic code'.
    this can be due to all kinds of causes. Only a few:
    1) conflict in the applications that you have open
    2) conflict in applications that load at startup
    3) memory lack
    -1) Try to find out if it only happens when you have certain applications open.
    -2) Try to remember if the problem suddenly started after you installed an application that needed a restart to function properly (anti virus software, encrypting software etc.)
    -3) Try to close as many applications as you can and only have the contacts open and see if it happens then too.
    I would also suggest to switch off the phone overnight. i myself had a 'strange behavior problem' solved after simply switching off the phone. I think it had to do with memory fragmentation cause I got the message too little memory while my E51 must have had over 100MB free memory. And a simple restart did not help.
    do you have a huge contact list? Maybe the list is too big for your phones memory. then you will suffer a memory problem and you have to delete some contacts.
    If nothing helps.... go to a nokia care point

  • KERN-EXEC 0

     KERN-EXEC 0 panics while running my application. It's a bluetooth based application, when ever I trid to do the device/service discovery I was getting this panic. The interesting part is that I didn't get this error always, it was comming randomly. Another thing is if there were more than two devices then this error was not coming.
    Can anybody guide me in this regard. I'm realy fed-up with this problem. Any clue will be of great helpful.

    If it is your own application try the Nokia application developer discussion boards on http://forum.nokia.com

  • Additional field in contact Backup Nokia 9500

    I want to take my nokia 9500 to repair a broken hindge!
    I have backed up my data onto memory card but it seems that an addional fields that created in Contact such as note is not backed up.
    How do you make sure any additional field is secured and could be restored?
    AM

    I want to take my nokia 9500 to repair a broken hindge!
    I have backed up my data onto memory card but it seems that an addional fields that created in Contact such as note is not backed up.
    How do you make sure any additional field is secured and could be restored?
    AM

  • Email sending in Nokia 9500

    Dear Friends - I have Nokia 9500. I am able to receive emails but not able to send emails. My incoming pop port is 110 and outgoing server smtp port number is 2525. My phone is not taking in four digit smtp number? Does that mean that Nokia 9500 does not support four digit outgoing server smtp number? Or it means that I need to upgrade my firmware? Please help! Thanks

    Dear Colin
    I hope you have the incoming and outgoing port numbers of rediffmail. The incoming is usually 110 and server is pop.rediffmail.com. This can be set up with your username and password and hope you start receiving the emails. For outgoing it may be a problem is setting up the number which is probably 25, smtp.rediffmail.com with smtp authentication. If this does not work then you can route your sending with putting in the gmail as the outgoing server (with this, although the email goes from gmail but your rediff email id will show to the recipient and you will receive the reply in rediff also).
    Hope this helps.
    Thanks
    Rajeev

  • Connecting a Nokia 9500 to wifi.

    Hello hope you can help . My brother has just got a Nokia 9500 and wants to get connected onto the internet via my wifi. Cant get it to work. A ny help much appriciated.

    the first time your connecting to internet it will ask u for access point >select easy Wlan> it will search for the wlan available the select your router> enter wep key if theres any security.

  • Searching for My lost Nokia 9500 Communicator

    Hi.
    Thanks for your support.
    I lost my Nokia 9500 communicator two weeks ago. I have notified the police, but I haven't received any news till now. Is there any technical way to find its location and recover it?
    I have backup stored in my PC. How can I preview these files on my PC to get my contacts and messages?

    The only way to find the phone would be if the network (some operator) helped you to trace the phone by its IMEI number. Most operators have the knowledge to do so, but they will probably only do it if they are looking for heavy criminals.
    Also the tracking from the network is made so they check which base station the phone has had contact with the last time and then try to use the signal from the other base stations to decide in which area the phone are. This method is not so precise. Depending on how close the base stations are it can be from 50 to 2000 meters that they can decide how near the phone are.
    As there are many phones that get lost/stolen I think operators will not help with this ever.
    Since the phone also doesn´t have any GPS hardware built-in it is impossible to say where the phone is, since the phone doesn´t know where it is.
    Depending on which version version you have of PC Suite you should only be able to restore that information to another phone. Probably you somehow might be able(I´m not sure if it is possible) to open the backup with some program or convert the backup file and open it up in some other program. I suppose the names etc. will not be so well structured when you do that since there will probably be some kind of binary code "messing" the information up so it is hard to read.
    Hope this clarified some things anyway!
    Regards,
    Henrik
    The views I present are my OWN and not of any organisation I may belong too.

  • Desk Note in Nokia 9500

    How do you backup the Desk notes created for nokia 9500 communicator?
    AM

    Dear Colin
    I hope you have the incoming and outgoing port numbers of rediffmail. The incoming is usually 110 and server is pop.rediffmail.com. This can be set up with your username and password and hope you start receiving the emails. For outgoing it may be a problem is setting up the number which is probably 25, smtp.rediffmail.com with smtp authentication. If this does not work then you can route your sending with putting in the gmail as the outgoing server (with this, although the email goes from gmail but your rediff email id will show to the recipient and you will receive the reply in rediff also).
    Hope this helps.
    Thanks
    Rajeev

  • Nokia 9500 Driving me mental!

    I've a Nokia 9500 and I can't get it to sync. I've tried the elaborate fixes and the software installs and nothing works. I can pair it but it won't sync. I have a P910i and I want to send my address book to the 9500 and it seems to go as a bluetooth send (all.vcf) but the file is never there. I've 427 contacts so one by one is not an option. Please help.

    First, check for messages posted under the profile Fuelleman:
    http://discussions.apple.com/profile.jspa?userID=402227
    Jan Fuelleman is a Nova Media employee with an intimate knowledge of how to correct issues like this.
    You may find useful information already posted about how to correct your Nokia 9500 problem. For example, there is a reference to resetting a Nokia device manager on a particular handset, that may also apply to you.

  • KERN-EXEC error when starting Maps 2.0 on my N95 8...

    Hi all!
    When I start Maps 2.0 (v2.0 wk21 b02) on my N95 8GB I get most of the times (but not always), the following error:
    Application closed:
    PosServer
    KERN-EXEC 3
    When I 'ok' that message the program seems to work normally though.
    What does this error mean? How do I get rid of it?
    Regards,
    Evert

    Hi all!
    When I start Maps 2.0 (v2.0 wk21 b02) on my N95 8GB I get most of the times (but not always), the following error:
    Application closed:
    PosServer
    KERN-EXEC 3
    When I 'ok' that message the program seems to work normally though.
    What does this error mean? How do I get rid of it?
    Regards,
    Evert

  • Nokia 9500 - Hinge Assembly Cracks Frequently

    02nd June'08
    NOKIA CUSTOMER CARE
    Dear Sir,
    Please note that I have been forced to replace the hinge assembly of my Nokia 9500 Communicator repeatedly as it cracks quite frequently. Please note details of purchase and changes done as given below.
    Model - Nokia 9500 Communicator.
    Date of Purchase: 18th Jan'07
    Seller: M/s. Studio Cell - TTK Road, Alwarpet, Madras - 600018. India.
    Replacements of HINGE ASSEMBLY (Casing of Inner LCD).
    Date: 22nd Aug'07: Service Centre - M/s. Quantum Telesys - 32 Thiru Vi Ka Road, Opposite to Satyam Theatre, Royapettah, Madras - 600014. Bill No: 340; Amount Charged: Rs.1800
    Date: 03rd April'08: Service Centre - M/s. Rocky Agencies (Formerly M/s. Quantum Telesys) - 32 Thiru Vi Ka Road, Opposite to Satyam Theatre, Royapettah, Madras - 600014. Bill No: 2771; Amount Charged: Rs.1800
    Now I have noticed that the same Hinge Assembly has developed crack and needs to be replaced !!!!!!
    I would like to ask Nokia, how come the mobile needs frequent replacement of Hinge Assembly which cost Rs.1800 every few months and over a period of 1 Year 4 months after purchase, I have to shell out Rs.5400 just to replace the same part every time !!! This is ridiculous to make expensive mobile which I have bought for over Rs.24,000/- and needs a service cost of Rs.1800 every 2 months !!!
    I request your reply and replacement of the Hinge Assembly part FREE of cost now.
    Thanking you
    D. Mohandas
    Moderator note: IMEI removed. It is unwise to publish unique serial numbers on the web.
    Message Edited by michaels on 02-Jun-2008 01:15 PM

    I've dealt with the Communicators in the past, the hinges were pretty sturdy - your must have been subjected to some poor treatment or extreme conditions to have just 'cracked'. I assume that the repair centres you have used have marked it as "accidental damage" which is not covered by the warranty.
    In any case, you are currently out of warranty, so it is difficult to see what you expect Nokia to do now.

Maybe you are looking for

  • Where can I find a tutorial on creating interfaces?

    I think an interface is what I need for the program I am working on, although I haven't found any tutorial on how to create these on the Java Tutorial... Anyone could point me somewhere else where I might learn without bothering anyone? :)

  • S_ALR_87012994 - Orders: Current Period/Cumulativec-Int Orders

    Hi, I am looking to understand the report S_ALR_87012994 - Orders: Current Period/Cumulative, Can someone tell me what the following fields mean in the report Act.to prv,     Act. ***.,      Ttl actual Thanks, Ram Message was edited by:         Ram R

  • Coldfusion 9 & Oracle 11g r1 connection

    We recently updated to Coldfusion 9. We are wondering how we can get an odbc connection to oracle 11g r1. I did a full installation of CF 9 with the ODBC option checked but it did not have an option for oracle databases, when we went to the data sour

  • Various questions - DP book - PLEASE ANSWER ASAP

    Hi All, Geraldine from Dubai - Hope everyone is fine. I am very new to SAP and had a trainging for 2 days on basic functions of Sales forecast planning book (DP) and Replenishment Book (SNP). I have need some help on following:- 1) How can I get to s

  • Aperture Plug-ins

    Hi there! Running the latest version of Aperture under Mountain Lion. Whenever I go to edit a file in Aperture using 'edit with plug-ins' I see a whole load of old plug-in names which I'm sure I've binned ages ago. Is there anyway I can go through an