KERN-EXEC error when starting Maps 2.0 on my N95 8...
Hi all!
When I start Maps 2.0 (v2.0 wk21 b02) on my N95 8GB I get most of the times (but not always), the following error:
Application closed:
PosServer
KERN-EXEC 3
When I 'ok' that message the program seems to work normally though.
What does this error mean? How do I get rid of it?
Regards,
Evert
Hi all!
When I start Maps 2.0 (v2.0 wk21 b02) on my N95 8GB I get most of the times (but not always), the following error:
Application closed:
PosServer
KERN-EXEC 3
When I 'ok' that message the program seems to work normally though.
What does this error mean? How do I get rid of it?
Regards,
Evert
Similar Messages
-
Kern-Exec Error when sending emails from 9500
Hi There
My first post so hopefully someone may be able to help and I'll try to help others if I can.
Just recently I have been unbale to send emails from my Nokia 9500. I don't think I've been doing anything differently but I keep getting KERN-EXEC error reason No 3, when I try to send email messages. Strange that I'm able to receive messages ok though.
I looked at some of the other posts and followed mobile manic's advice for other KERN-EXEC errors. I backed up the phone contents to the PC, restored the phone to default settings and then re-loaded all the backed up stuff.
Sadly, I still get the KERN-EXEC error message when I try to send emails. It seems to conect to GPRS ok but then the message just sits in the Outbox waiting to go but never does. So when I close the program (after leaving it for a few mins) that's when I get the KERN-EXEC error message.
Any help greatly appreciated.
Cheers
Sparky007Hi there Sparky!
I don't suppose you tried to send an email before you restored the backup did you? Sometimes backups can back up the problem as well which is a bit annoying.
If you can send an email ok before restoring the backup then the problem must be embedded in the backup... otherwise the only thing I could suggest is contacting a Nokia engineer to get them to have a look at it.
Not sure what else to suggest... good luck though and let us know how you get on. -
I found Error message, and asked me to start the application again, every time I start Map Loader version 1.2 (latest).
I installed, and was asked to install also NET Framework 3.0.
Some people said the error casued by NET Framedwork, but I could not run Map Loader without it.
I tried reformat my E61i and its memory card, but the problem occured the same.
Anyone facing the same problem? Any recommended solution?
Thank you for your help in advance!You might not be able to download the .net framework 3.0 correctly using the installer for maps loader. Try this:
Download and install the .net framework 3.0 from this location ---> http://download.microsoft.com/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
Then try to install the Maps loader again, this time it will not ask you to install the .net framework.
~ the lost viking ~ -
Hi
We are having SRM5.0.
Trying to create Contract. Workflow Without approval of contract(WS1400086)is activated and start conditions also no workflow activated.
Contract is created and getting message Contract created.
But when tried to release the contract it shows "Awaiting approval".
In Workflow log (SWI1)it shows error."Error when starting work item xxxx".
What could be the reason. Please let me know the solution if anyone of you come across such error.
Thanks in advance
JagadishMasa
It is maintained as General task already.
It seems the workflow task WS14000085 does not have definition.
When checked in SWDD for the above teask there are no steps defined for that workflow.
SAP says that we need to define and action for workflow WS14000085.
But what is the procedure to define the workflow.
I presume this is the standard workflow and it should be defined by default when it comes along with the SRM package.
Anyone of you know how to define the workflow and activate the same?
Regards
Jagadish -
Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'
Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngAHi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM -
Error when starting a SWITCH branch (8987)
Hi,
I am testing my workflow which starting with a multiple condition (switch). The workflow process is stopped with the error:
Error when starting a SWITCH branch (8987).
The workflow check shows no warnings or errors. What could be the problem?
Thank you in advance.
/ElvezCheck the workflow container (of the started workflow instance) and see if you spot a problem with one of the container objects used in your switch conditions.
-
Error when starting Mercury Quicke Test Professional
Hello,
I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
Does anybody knows how to resove this?
Thanks,
MahanteshHi,
This is a common problem if scripting is disabled either on server or on ur sapgui client.
for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
Refer my sdn weblogs which shows minimum config for QTP and ECATT and also how to create and run the scripts.
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
/people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
Please reward points. -
Error when starting configtool.
The installation is successful. But I am getting the following error when starting configtool:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while conn
ecting to DB.
This is not during the installation as given in some of the other posts. The installation is successful and I am able to start and run the J2EE engine and the Portal. This error occurs when I try to start the config tool.
Any help would be appreciated. Thanks.Hi Arul,
Have you checked the parameters that the configtool is using to connect? (don't use default settings)
What database is this on? In the case that it is oracle can you TNS ping the db? The listener is running?
Regards
Daniel -
Error when Starting WAD in New System
Hi
We are getting the following error when starting the Web Application Designer.
"Component 'BexWEbApplicationDesigner': available version 64 , Version 154 required bfore you can continue you have to run the front end "
I understand that we are missing some fornt end patch.Where can i get this patch.
Can i get this patch or version in SAPservice market place.
Please help me
How to correct this error.Any thoughts are welcome...
Regards
Pravallika
Message was edited by:
Pravallika ThammineniHi Pravallika,
Do you already have an answer to this problem. I am experiencing the same problem at the moment...
Best Regards
Marcel -
Error when starting Java(TM) ME Platform SDK 3.0
hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
System Info: Product Version = Java(TM) ME Platform SDK 3.0
Operating System = Windows Vista version 6.0 running on x86
Java; VM; Vendor = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
Runtime = Java(TM) SE Runtime Environment 1.6.0_23-b05
Java Home = C:\Program Files\Java\jdk1.6.0_23\jre
System Locale; Encoding = en_GB (cdctoolbar); Cp1252
Home Directory = C:\Users\Molten Ice
Current Directory = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
User Directory = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
Installation = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
Boot & Ext. Classpath = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
Application Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
Startup Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
[ 0] INFO - ootstrap.PropertyEditorManager - Registering custom property editors
[ 117] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 217] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 317] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 417] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 523] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 627] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 732] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 832] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 932] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 1032] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2166] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2268] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 3384] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 5476] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 7576] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 9677] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 11777] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 13877] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 15977] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 18077] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 20177] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 22277] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 23379] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
... 24 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
... 27 more
Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
... 32 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
... 37 more
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
Caused: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 23598] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 23698] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 23798] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 23898] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 23998] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 24098] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 24198] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 24298] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 24398] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 24498] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 24600] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 24700] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 24800] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 24900] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 25000] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 25100] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 25202] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 25302] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 25402] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 25502] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 25602] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26699] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26799] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 27914] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 30005] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 32106] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 34206] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 36306] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 38406] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 40506] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 42607] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 44706] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 46806] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 48018] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 48118] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 48218] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 48318] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 48418] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 48518] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 48618] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 48718] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 48818] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 48918] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 49018] INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
But nothing worked.
Any help appreciated!
Thanks.Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.
-
Error when starting weblogic server 10.3.6
hi am having below error when starting my weblogic server am in window xp
C:\mydomain\base_domain\bin>DIR
Volume in drive C is WinXP
Volume Serial Number is F086-F167
Directory of C:\mydomain\base_domain\bin
22/04/2011 11:10 PM <DIR> .
22/04/2011 11:10 PM <DIR> ..
22/04/2011 11:10 PM <DIR> nodemanager
22/04/2011 11:10 PM <DIR> server_migration
22/04/2011 11:10 PM <DIR> service_migration
29/11/2011 10:14 PM 14,273 setDomainEnv.cmd
29/11/2011 10:14 PM 16,221 setDomainEnv.sh
29/11/2011 10:14 PM 3,322 startManagedWebLogic.cmd
29/11/2011 10:14 PM 3,147 startManagedWebLogic.sh
29/11/2011 10:14 PM 5,914 startWebLogic.cmd
29/11/2011 10:14 PM 5,657 startWebLogic.sh
29/11/2011 10:14 PM 2,528 stopManagedWebLogic.cmd
29/11/2011 10:14 PM 2,391 stopManagedWebLogic.sh
29/11/2011 10:14 PM 2,103 stopWebLogic.cmd
29/11/2011 10:14 PM 2,081 stopWebLogic.sh
10 File(s) 57,637 bytes
5 Dir(s) 6,815,825,920 bytes free
C:\mydomain\base_domain\bin>START startWebLogic.cmd
C:\mydomain\base_domain\bin>
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\wlserver\server\lib\weblogic_sp.jar
;C:\wlserver\server\lib\weblogic.jar;C:\modules\features\weblogic.server.modules
_10.3.4.0.jar;C:\wlserver\server\lib\webservices.jar;C:\modules\org.apache.ant_1
.7.1/lib/ant-all.jar;C:\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.
jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle
\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\wlserver\common\derby\li
b\derbyclient.jar;C:\wlserver\server\lib\xqrl.jar
PATH=;C:\wlserver\server\native\win\32;C:\wlserver\server\bin;C:\modules\org.apa
che.ant_1.7.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.
0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bi
n;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PH
P;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Commo
n Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLSha
red;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Co
mmon Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Co
mmon Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Share
d\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C
:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program File
s\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\
jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\
DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\
forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\wlserver\server\nati
ve\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer
-Djava.security.policy=C:\wlserver\server\lib\weblogic.policy -Xverify:none -ea
:com.bea.wcp... -da -Dplatform.home=C:\wlserver -Dwls.home=C:\wlserver\server
-Dweblogic.home=C:\wlserver\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\
ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.common
s.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomain\BASE_D~1 -Djrockit.optfile=
C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dorac
le.server.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1\servers\AdminServer -D
oracle.domain.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans
.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\
mydomain\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:
\mydomain\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\
mydomain\BASE_D~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\-
-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.os
soiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djav
a.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole
= -Dwlw.logErrorsToConsole= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
my set is
C:\mydomain\base_domain\bin>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Desmond\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=MADIMAD-B533821
ComSpec=C:\WINDOWS\system32\cmd.exe
FORMS90_PATH=C:\forms
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Desmond
LOGONSERVER=\\MADIMAD-B533821
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\product\11.2.0\dbhome_1
OS=Windows_NT
Path=C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bin;C
:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C
:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common F
iles\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared
;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Commo
n Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Commo
n Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\D
LLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\m
ydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\J
ava\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk
1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\Dev
SuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\for
ms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PHPRC=C:\Program Files\PHP\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
TMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
USERDOMAIN=MADIMAD-B533821
USERNAME=Desmond
USERPROFILE=C:\Documents and Settings\Desmond
windir=C:\WINDOWS
aa__COMPAT_LAYER=EnableNXShowUITshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo -
Error when starting submethod -
Dear Experts,
we are using standard work flow for Appropriation Request(AR) approving.
Approvers are geting mail to SAP inbox.
when double click on inbox->worlflow item for that particular AR, it goest AR display screen & when we click on balk(F3) goes to screen where we can click on "approve" , " Reject" buttons.
now issue is once double click on inbox item gives infor message saying "Error when starting submethod"(Message no. SWF_RUN637) & goes to approval screen directly.
Please help to correct this issue.
Thanks & kind Regards,
SLHi,
The issue might be with the secondary methods of the decision step. Check if any secondary methods are included in the decision step. and make sure when you are using the secondary methods you should ahve the instance of the business object.. in the workflow container so that the methods that you want to execute parallel while or before executing the workitem.
The secondary methods will be listed out under METHODS tab of decision step
Regards
Pavan -
Windows error when starting iTunes 5.
Hey.
My iTunes suddenly started giving me a Windows error when starting it. I installed iTunes 5 instead of iTunes 4 recently, and it has been running. But today when I wanted to transfer some more music to my iPod iTunes wouldn't start. I just get the Windows Error... thing. What can I do? I already tried to reinstall it, but as you know, it's god d*mn impossible to completely delete Apple software without a format.
I talked to a friend of mine who had experienced the same problem, but it was his firewall/antivirus (F-Secure) that was the problem, and I'm running PC-Cillin - which I tried to disable, but it didn't help.
Help, thank you.Deffo a missing quicktime issue. See my post Chris Rocco, "itunes launching problem.", 07:20am Oct 2, 2005 CDT
Itunes relies for some unknown reason on compression technologies in quicktime libraries. Crazy! No more quicktime alternative! -
MissingResourceException Error when Starting Application
I am getting the following error when starting an Enterprise application in weblogic 10.3.6:
.MissingResourceException: Can't find bundle for base name resources.Messages, locale en
A snippet from my faces-config.xml file:
<application>
<locale-config>
<default-locale>en_US</default-locale>
<supported-locale>ko_KR</supported-locale>
</locale-config>
<message-bundle>resources.application</message-bundle>
<message-bundle>resources.Messages</message-bundle>
<resource-bundle>
<base-name>resources.Messages</base-name>
<var>msgs</var>
</resource-bundle>
<resource-bundle>
<base-name>resources.ErrorMessages</base-name>
<var>errorMsgs</var>
</resource-bundle>
<resource-bundle>
<base-name>resources.Labels</base-name>
<var>labels</var>
</resource-bundle>
</application>
I have an Enterprise Application (.ear file) that contains one WAR file. The War file includes resources in the following structure:
.war
WEB-INF
classes
resources
Messages_en_US.properties
Messages_ko_KR.properties
How can I correct this error?I successfully installed SAP NetWeaver 7.01 ABAP Trial Version on Vista home edition. I was able to start the application server by following the steps outlined by Marcelo Ramos at the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c0bdf1-3440-2b10-db8a-ae16f614745d
I hope this helps someone else as well.
Barbara -
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
Maybe you are looking for
-
I just need to know if Delivery will still be 09/19? thanks
-
Hi, We have a requirement to exclude non-Business days while calculating Baseline date(for the Accounting Document created on saving the Billing document) Currently the Baseline Date being populated in the Accounting Document is Document date + 5days
-
How to convert pal to ntsc?, how to convert pal to ntsc?
Hi, I recently purchased a video camera that records in pal and i imported the clips into imovie and edited them together and am just wondering what the process would be from here to convert this file to one accepted by north american companies (i.e
-
Errors generating reoprs using jasperReports in dwr
I am generating reports using jasperReports in dwr .i am getting these errors Errors were encountered when compiling report expressions class file: D:\Program Files\Apache Software Foundation\Tomcat 5.0\item_1195287830437_658743.java:4: package net.s
-
hello, any body pls explain me. i am facing to issues pls provide me solution 1) my scenario is make to order with configurable material. when i am creating sales order in configuration i have maintined characteristic which were mainly required and s