Kernal Panic (0) cpu not supported
2 yr old Imac with 8 gig memory. SN 10.6.8.
Cannot boot computer. Get the above kernal panic. Occurs on safe mode boot, boot from DVD, as well as standard boot.
Everything was fine until I tried booting from the SN DVD. Then the kernal panic started. It occurs after the apple is displayed on the screen.
Dead cpu? Help please.
See
About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details.
Similar Messages
-
Hi, i have a HP Pro 3015 microtower and i bought an AMD Phenom II X4 955 Black Edition, i checked my mainboard (Violet6) in the hp website and it supports this cpu, but when i start my pc i get a message like "CPU not supported, the computer will shut down i few seconds". Any help?
(Now i'm using the integrated Athlon II X2)
This question was solved.
View Solution.Hi,
Well, that why I said: check BIOS first. Other thing comes to my mind, the PSU is only 300W therefore it may not have enough power to drive the new CPU.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Get Windows 10 app reporting 'CPU not supported' Acer Aspire 5738Z
Hi, My first post here so please be gentle I have an Acer Aspire 5738Z with a T4200 Pentium Dual core CPU running Windows 7 Home Premium. The Get Windows 10 app is telling me that I can't install Windows 10 because the CPU isn't supported. A bit of research suggests that this is because NX is not enabled in the Bios, however, even though the CPU supports NX there is no option to enable it in the latest Pheonix Bios incarnation (v1.34) on the notebook. I've chatted with Acer support but it seems all they can do is follow their script and point me towards the Microsoft website where you can check if Win 10 is going to be compatible with the notebook. This obviously pointless as I get the same result. Does anybody know how I can enable NX on the CPU please or if indeed the problem can be overcome by a different method ? I surely can't be the only one with this problem ? Cheers for any help offered
I don't know your CPU, but if your CPU should normally support NX-feature (google said yes), this thread could be interesting for you:http://community.acer.com/t5/Windows-10/AOD257-Windows-10-upgrade-reports-cpu-wouldn-t-support-NX/td-p/372309/jump-to/first-unread-message I have solved the NX-problem by installing a clean Win7. Additional hints: Here you can see if your CPU supports NX:Open Windows Explorer. Right click This PC or Computer and choose, ‘Properties’. Then select the ‘Advanced System settings’ option. Next, from the ‘System Properties’ window, select ‘Advanced’ tab. Choose the ‘Performance’ section now and from the new Performance Options window that appears on your computer screen, select ‘Data Execution Prevention tab’. If you see below a message like "Your computer's processor supports hardware-based DEP", your CPU should support NX You can also try the following:Open the Command Prompt with administrator rights! and enter:bcdedit.exe /set {current} nx AlwaysOnThis should enable NX in your Windows system (not in your BIOS). And if your BIOS is able to enable or disable NX (respective XD), you can look here:http://acer--uk.custhelp.com/app/answers/detail/a_id/27071/~/how-to-enable-or-disable-secure-bootUnfortunately my BIOS has no option to enable or disable NX and I also can't select secure boot.
-
I have a n HP p7-1380t computer with:
Inland 500w PSU
H-Joshua-H61-uATX motherboard
nvidia GTX 660 graphics card
I just replaced the included i5-3330 processor with an i5-3570k and when I turn on the computer, an errror message comes up that says the CPU is not supported; then the computer automatically shuts down.
The i5-3570k has a TDP of 77w, which is an allowed wattage for the motherboard
See: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03135925&cc=us&dlc=en&lc=en#N129
The error screen also says to press esc to go to the startup menu, but when I press esc, the only thing that happens is more text appears that says "startup menu". Then the computer powers off.
How do I get my PC to work with this new CPU?
Thanks.
This question was solved.
View Solution.You're very welcome.
-
I've been getting Kernal Panic!!! pls Help!
Alright so i had kernal panic before.. not sure if it's the same problem but i took a look at the problem and i got this:
Any Ideas?
Wed Apr 8 15:08:16 2009
panic(cpu 1 caller 0x001A936C): Double fault at 0x620ba863, thread:0xb2485d0, trapno:0x8, err:0x0),registers:
CR0: 0x8001003b, CR2: 0x2fd3bfe8, CR3: 0x010b6000, CR4: 0x00000660
EAX: 0x29e6371c, EBX: 0x620cb92c, ECX: 0x620ba842, EDX: 0x00000000
ESP: 0x2fd3bff0, EBP: 0x2fd3c088, ESI: 0x620cb960, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x620ba863
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x29f90fb8 : 0x12b4f3 (0x45b13c 0x29f90fec 0x1335e4 0x0)
0x29f91008 : 0x1a936c (0x464184 0x620ba863 0xb2485d0 0x8)
0x29f910e8 : 0x1a11c3 (0x29f91100 0x401ff4ab 0x803fe956 0x7fd2ad)
0x2fd3c088 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c128 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c1c8 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c268 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c308 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c3a8 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c448 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c4e8 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c588 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c628 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c6c8 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c768 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
0x2fd3c808 : 0x620bab81 (0x3c33800 0xa 0x0 0x1)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
org.pqrs.driver.KeyRemap4MacBook(5.1.0)@0x620b8000->0x620ccfff
dependency: com.apple.iokit.IOHIDFamily(1.5.3)@0x29e2b000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)I got it AGAIN!!!
Thu Apr 9 01:19:46 2009
panic(cpu 1 caller 0x001A936C): Double fault at 0x66c9c863, thread:0x4ccf790, trapno:0x8, err:0x0),registers:
CR0: 0x8001003b, CR2: 0x3052ffe8, CR3: 0x0191c000, CR4: 0x00000660
EAX: 0x0071f71c, EBX: 0x66cad92c, ECX: 0x66c9c842, EDX: 0x00000000
ESP: 0x3052fff0, EBP: 0x30530088, ESI: 0x66cad960, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x66c9c863
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x2a3cdfb8 : 0x12b4f3 (0x45b13c 0x2a3cdfec 0x1335e4 0x0)
0x2a3ce008 : 0x1a936c (0x464184 0x66c9c863 0x4ccf790 0x8)
0x2a3ce0e8 : 0x1a11c3 (0x2a3ce100 0x401ff4ab 0x803fe956 0x7fd2ad)
0x30530088 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530128 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x305301c8 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530268 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530308 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x305303a8 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530448 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x305304e8 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530588 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530628 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x305306c8 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530768 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
0x30530808 : 0x66c9cb81 (0x4423800 0xa 0x0 0x1)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
org.pqrs.driver.KeyRemap4MacBook(5.1.0)@0x66c9a000->0x66caefff
dependency: com.apple.iokit.IOHIDFamily(1.5.3)@0x6e7000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
not sure if it's the keymap i had that since i bought my MacBook Pro and i never got kernal panic before...
also what other keymapping program you know of that is better? cuz i need to make the Option on the right side a "ENTER" function.. -
MacBook Pro 15" 2.2 GHz. Kept getting kernal panics. No disk utitlity would repair hard drive. Replaced Hard Drive. when loading OS, still getting the kernal panic. Did not load any new software or hardware. Any ideas?
ThanksSince you're talking about kernal panics ... suddenly my iMac G5 has started acting up. The only thing I've changed is I've upgraded to an airport Extreme.
Can anyone interpret this for me?
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000053010026 PC=0x000000000003FFD4
Latest crash info for cpu 0:
Exception state (sv=0x2FB53000)
PC=0x0003FFD4; MSR=0x00009030; DAR=0x53010026; DSISR=0x00200000; LR=0x0003FFBC; R1=0x17A83A70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00296204 0x0002BDCC 0x002FE21C 0x002FE2E4 0x002BAE8C 0x002BAF2C
0x002C25BC 0x002C268C 0x002EA2C0 0x0008ADB8 0x00029234 0x000233F8 0x000ABEAC 0x0239B700
backtrace terminated - frame not mapped or invalid: 0xF007FC50
Proceeding back via exception chain:
Exception state (sv=0x2FB53000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FF7CA00)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x003026E4; DSISR=0x0A000000; LR=0x9000AE9C; R1=0xF007FC50; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2FB53000)
PC=0x0003FFD4; MSR=0x00009030; DAR=0x53010026; DSISR=0x00200000; LR=0x0003FFBC; R1=0x17A83A70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00296204 0x0002BDCC 0x002FE21C 0x002FE2E4 0x002BAE8C 0x002BAF2C
0x002C25BC 0x002C268C 0x002EA2C0 0x0008ADB8 0x00029234 0x000233F8 0x000ABEAC 0x0239B700
backtrace terminated - frame not mapped or invalid: 0xF007FC50
Exception state (sv=0x2FF7CA00)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x003026E4; DSISR=0x0A000000; LR=0x9000AE9C; R1=0xF007FC50; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac8,1, BootROM 5.2.2f4, 1 processors, PowerPC G5 (3.0), 1.8 GHz, 1 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
Memory Module: DIMM0/J4000, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J4001, 512 MB, DDR SDRAM, PC3200U-30330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: Jump, V.92, Version 1.0
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3320613AS, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-825
USB Device: JD FireFly, Lexar, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
FireWire Device: My Book, WD, Up to 400 Mb/sec -
Received kernal panic AppleACIPlatform running OSX 10.9.1
On my MacBook Pro. Came back from vacation to find kernal panic upon start-up. Happens repeatedly (won't boot up in safe or normal mode). Have tried restoring the hard-drive, restoring permissions (both of which said "restored fine" but problem remained), recovering from Time Machine (says recovered ok, but still cannot boot), and reinstalling OS-X (would not successfully reinstall). Am attaching picture of kernal panic. Have not recently installed any software.
Any ideas? I'm suspecting a hardware issue.
Thank you.Intel-based Macs: Resetting the System Management Controller (SMC)
-
Kernal Panic - processes consume CPU
Recently the CPU in my MBP (Intel) is getting overloaded with certain processes, and it can cause a Kernal Panic after a period of stuttering. One case when this occurs is when I am using a browser to stream video (in this case firefox but also happens with safari) and either the Firefox bin or webkithostplugin suddenly starts returning CPU consumptions of up to 140%! (measured with iStat)
I know however that this issues isn't confined to this particular process, because the problem also occurs when I use audio workstations (Live) where the process suddenly starts consuming over 100% and everything starts to jitter.
I have installed the recent 10.6.3 update and repaired permissions.
I will paste my kernal panic report because I have no idea what else to do
Interval Since Last Panic Report: 7797 sec
Panics Since Last Report: 1
Anonymous UUID: E4F9D736-DA42-4165-9F7F-34E91E7DAFDD
Wed Jul 7 11:34:14 2010
panic(cpu 1 caller 0x28d59c): "pmapflushtlbs() timeout: " "cpu(s) failing to respond to interrupts, pmap=0x5317e80 cpustorespond=0x1"@/SourceCache/xnu/xnu-1504.7.4/osfmk/i386/pmap.c:3548
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x35c03b38 : 0x21b455 (0x5cf328 0x35c03b6c 0x2238b1 0x0)
0x35c03b88 : 0x28d59c (0x58d740 0x5317e80 0x1 0x391d0e98)
0x35c03bf8 : 0x29274b (0x5317e80 0x357dd000 0x0 0x221bb0)
0x35c03d88 : 0x254d4b (0x5317e80 0x357dd000 0x0 0x76277)
0x35c03df8 : 0x257d1f (0x3ca8c00 0x5317e80 0x357dd000 0x0)
0x35c03f38 : 0x2a838c (0x52c2e18 0x357dd000 0x0 0x3)
0x35c03fc8 : 0x29e80a (0x62f4900 0x0 0x10 0x0)
BSD process name corresponding to current thread: firefox-bin
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro2,2 (Mac-F42187C8)
System uptime in nanoseconds: 8590582732913
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xcba000, size 0x12288) - last unloaded 105342854097
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.7.2
se.coolbook.driver2 2.1.0
com.Cycling74.driver.Soundflower 1.5.1
at.obdev.nke.LittleSnitch 2.2.05
com.apple.driver.AppleBluetoothMultitouch 51.2 - last loaded 402878236822
com.apple.filesystems.msdosfs 1.6.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.kext.ATIFramebuffer 6.1.6
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.AppleBacklight 170.0.24
com.apple.ATIRadeonX1000 6.1.6
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AirPort.Atheros 423.19.10
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AppleHDA 1.8.7f1
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.iokit.IOAHCIBlockStorage 1.6.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.2
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.0.2
com.apple.driver.AppleUSBUHCI 4.0.2
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
com.apple.driver.IOBluetoothHIDDriver 2.3.3f8
com.apple.driver.AppleMultitouchDriver 204.13
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.kext.ATI1600Controller 6.1.6
com.apple.kext.ATISupport 6.1.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 311.1
com.apple.driver.AppleUSBAudio 2.7.3f1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.DspFuncLib 1.8.7f1
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.3f8
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAController 1.8.7f1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.iokit.IOHDAFamily 1.8.7f1
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.2b1
com.apple.driver.CSRUSBBluetoothHCIController 2.3.3f8
com.apple.driver.AppleUSBBluetoothHCIController 2.3.3f8
com.apple.iokit.IOBluetoothFamily 2.3.3f8
com.apple.driver.AppleUSBMergeNub 4.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.1
com.apple.iokit.IOUSBHIDDriver 4.0.2
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.0.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.0.2
com.apple.iokit.IONetworkingFamily 1.9
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.4
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6.1
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro2,2, BootROM MBP22.00A5.B07, 2 processors, Intel Core 2 Duo, 2.33 GHz, 2 GB, SMC 1.12f5
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
Memory Module: global_name
AirPort: AirPort Extreme, Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS541612J9SA00, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0605, 0xfd100000
USB Device: USB to ATA/ATAPI Bridge, 0x059b (Iomega Corporation), 0x0475, 0xfd110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000
USB Device: Lexicon Omega, 0x1210, 0x0002, 0x3d100000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x1d200000Well, I have been noticing some other issues going on and am starting to think there is some link with one of the recent apple updates (10.6.4 and ProApplications perhaps). I have found that while I am running certain applications the CPU suddenly doubles in consumption. The two cases I have found are with Ableton Live and streaming video through web browsers (firefox and safari). After some time of operation, say around 5 minutes regardless of whether any other applications are running or not, the CPU suddenly spikes, stays at double the previous, and eventually starts causing the system to stutter and crash my external soundcard and drive.
I should probably make a new general post, but in the meantime if you have any suggestions or have seen other people with issues since a recent Apple update let me know. -
3 Kernal panics and high CPU load
2 problems: 1.) I've had 3 kernal panics since I bought my macbook a couple weeks ago. The latest one happened when I was just reading something on the screen, then I adjusted the screen angle (and prehaps the screen saver came on then too) and the screen goes black and the kernal panic notice comes up.
Another kernal panic came when I unpluged my headphones, and the 3rd I can't remember.
Is this a lot? It's more than 1 a week for moderate usage.
Now today I find that the CPU load goes up over 50 % (40-50 of it user) as seen with activity monitor, iStat pro wigit and core duo temp wigit. The temp also goes up to 80 degrees, all with no programs open! In addition, the total CPU usage listed in activity monitor is around 15%. Where is all this extra CPU usage coming from, and how do I stop it? Reseting sometimes solves the problem for a few minutes, then it is back.Glad to know we're making progress:
Now I'm way out of my depth having only ssh'd a noisy five-year-old, but I recall seeing on sites like MacIntouch that the Finder often tries to endlessly remount a share using SAMBA.
For instance: (from http://www.MacInTouch.com)
<<A lot of people have notice very heavy CPU load, but have been unable to determine which process it is that is causing it.
I had this same problem, tracked it down and worked around it before learning that many others were facing it. It's caused by Windoze File Sharing/Samba. For me, the problem only happened if Samba was enabled across a reboot. In this situation, nbmd tries to start up, hits an error, and quits, and is immediately relaunched. This repeats in excess of 20 times/second, causing the incredible load. I'm not sure why it doesn't show up as load, at least in the kernel task, but it doesn't.
The solution for me was to simply quit Windoze File Sharing and restart it. That generally allowed nbmd to come up without problems, but they would start up again after a reboot. I finally just turned it off WFS altogether (don't use it that often).>>
There now, that's as much as I know, and I offer it in the hope that those who know what ssh and SAMBA actually are, might be able to make some use of it...
Regards
TD
MacBook Pro 15 2.16gig / iMac G5 20 Mac OS X (10.4) 2 gig RAM/ 1 gig RAM -
I upgraded the ram and hdd a while back(RAM first with no issues, then hdd around 2 months later). The computer started freezing a few days after the hdd upgrade.
I reformatted the hdd and it worked fine for a few weeks then same freezing issue. Instead of wiping the drive again I repaired the disc and this had it fixed for about a month. I was booting in safe mode for a few days with no issue and went about uninstalling 3rd party apps. Then the Kernal panic issue started, When I inserted the OS cd the screen went blank and has not come back on after repeated boots.
Can we put this down to logic board and if so can it be repaired rather than replaced?
Thanksthanks for the reply,
just reinstalled the factory RAM and HDD. Same issue of blank screen. At the moment i have no way of connecting to external monitor.
The OS cd is still in drive and i can hear the drive spinning for a few seconds at the start but it stops after about 20 seconds. -
Can't open F-Fox 4 in my iMac G5 w/PowerPC CPU; icon says "not supported on this system"
I have a somewhat old iMac G5 with what I believe is a Power PC CPU. I have used Firefox as long as I've had this. I just downloaded the new Firefox 4, and it shows a classic "NO" symbol (slashed circle) over the new Firefox 4 icon. When I click on the icon I get: "You cannot open the application "Firefox" because it is not supported on this system."
Must I go into mourning? Has CPU old age finally caught up with me? I LOVE Firefox; I hate Microsoft. Must I abandon my true love?There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
The latest official version that works on OS X 10.4 and PPC Macs is Firefox 3.6.16 available from http://www.mozilla.com/en-US/firefox/all-older.html -
Not Support this type of CPU: 0f33
Hi. After I flashed the BIOS to version 2, I get this error message "Not support this type of CPU: 0f33". I can't get to a floppy drive or CMOS to recover the flash.
Has anyone else encountered this and if so, how did you get around it to recover?
Thx
MikeCMB MSI 848P Neo
1 GB RAM
Intel 2.8 CPU
120 MB Hard Drive
Found this article and tried it. But still cannot get to anything. Have a bootable floppy with the old bios version but cannot get to the floppy to boot it. The MB just hangs on the screen display "Not support this typs of CPU:0F33". Any help would be great.
Thx
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer. -
When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. Do I need this software? Can I just download the pictures to my Mac without using the Canon software?
When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN -
Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
ThanksHi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.
Maybe you are looking for
-
How to print photos on my printer
How do I print photos on my printer?
-
Hyperion - Portal Integration with Liferay
Hi, Anyone has experience in hyperion portlet integration with liferay? By looking at the hyperion portal integration kit -- there seems to be no support for liferay. are these hyperion portlets are dependable on the portal application?? Thanks
-
My adobe cloud will not open, how do I fix this?
I have tied to repair, uninstall and reinstall. The most I have gotten is the window for the cloud to open showing the program is there but it does not open at all. How do I fix this on windows 7?
-
Converting an application that uses COM to 64bit.
I have a legacy application that uses COM classes for Direct Show. I would like to find out if there are any differences between using COM for 32bit and 64bit applications as the plan is to convert this to a 64bit application. The main application i
-
Xcelsius Bubble Chart - Drill Down Issues
Hi , Product : Xcelsius SP 3 I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings. The problem is with drill down I want to drill down to a X-Y chart when I click on bubbles. Each bubb