KERNAL PANIC EVERY TIME I START UP

Hello, I have a four month old Mac Pro, that has been not working properly since the day i bought it. Apple suggested I bring the machine into the store, but I am a student and cannot go without my computer for more than 2-3 days...
I purchased the computer in-store, and requested they install the 8800 GT as well as airport in-store. The store actually had 8800 GT cards in stock, and installed it on my Second PCI bay. They also left me the original ATI card, which was in slot 1. When I booted up the machine, it continuously was showing kernal panics, literally every five minutes. I then realized, that only slot 1 is PCI 2.0, and figuring the 8800GT is 2.0, that it would be best to swap the cards positions (ati to slot 2, nvidia to slot 1). This reduced my number of panics, but still, every time I boot the computer up for the first time in the day, the computer panics at startup. I am now wondering if the Nvidia card is the card designed for the previous generation Mac pro (which does not have pci 2.0). I have ran basic and extensive hardware tests that come on the Mac OS install disk, which have done shown nothing to be functioning incorrectly. this is a copy of the log entries regarding the error
Sun Sep 14 13:16:03 2008
Machine-check capabilities (cpu 0) 0x0000000000000806:
family: 6 model: 23 stepping: 6 microcode revision 1547
Intel(R) Xeon(R) CPU E5462 @ 2.80GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000004
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0xb200000410000800 valid
MCA error code : 0x0800
Model specific error code: 0x1000
Other information : 0x00000004
Threshold-based status : Undefined
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0x0020000000000000 invalid
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb200001044100e0f valid
MCA error code : 0x0e0f
Model specific error code: 0x4410
Other information : 0x00000010
Threshold-based status : Undefined
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 0 caller 0x001A8656): Machine Check at 0x001a235d, thread:0x4685f20, trapno:0x12, err:0x0, registers:
CR0: 0x80010033, CR2: 0x04804000, CR3: 0x015ad000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000001, ECX: 0x00000000, EDX: 0x00000001
ESP: 0x37c17d38, EBP: 0x37c17d38, ESI: 0x00000000, EDI: 0x00521a6c
EFL: 0x00010046, EIP: 0x001a235d
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4ece28 : 0x12b0fa (0x4592a4 0x4ece5c 0x133243 0x0)
0x4ece78 : 0x1a8656 (0x462504 0x1a235d 0x4685f20 0x12)
0x4ecf58 : 0x19fd93 (0x4ecf70 0x0 0x0 0x0)
0x37c17d38 : 0x1a7efc (0x1 0x0 0x0 0x12185000)
0x37c17d58 : 0x19ccd7 (0x521a6c 0x1000 0x246 0x17e069)
0x37c17d88 : 0x1a7456 (0x12185000 0x0 0x1000 0x2696cd8)
0x37c17da8 : 0x15f340 (0x12185 0x69c8460 0x1000 0x0)
0x37c17de8 : 0x1628a2 (0x69c8460 0x1000 0x0 0x3)
0x37c17f58 : 0x1a8f72 (0x1f338e8 0x4804000 0x0 0x3)
0x37c17fc8 : 0x19ece6 (0x4590ca0 0x0 0x1a20b5 0x4d84410)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb007ec78
BSD process name corresponding to current thread: mdworker
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
AS WELL AS
Sat Sep 13 11:32:35 2008
panic(cpu 0 caller 0x0075E396): "Uncorrectable Fbd memory error detected. FERR_NF = 0x20000020 , NERR_NF == 0x02000021\n"@/SourceCache/AppleMCEDriver/AppleMCEDriver-117.4.0/AppleMCEDriver .cpp:947
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x108c58 : 0x12b0fa (0x4592a4 0x108c8c 0x133243 0x0)
0x108ca8 : 0x75e396 (0x75f824 0x20000020 0x2000021 0x8100a4)
0x108d68 : 0x75e836 (0x4e05700 0x4e05700 0x2 0x820044)
0x108df8 : 0x7d2768 (0x4e05700 0x0 0x4672300 0x0)
0x108e28 : 0x7d25d9 (0x465e780 0x0 0x0 0x1c)
0x108e48 : 0x7e6169 (0x1c 0x108eb8 0x8 0x7e80c0)
0x108e78 : 0x7e6310 (0x4658b1c 0x17 0x465e94a 0x80bf02)
0x108ed8 : 0x7f1f2e (0x4655988 0x5b47fbd0 0x2 0xc59408)
0x108ef8 : 0x437f09 (0x4655988 0x0 0x457eb80 0x0)
0x108f28 : 0x8d2521 (0x465e800 0x0 0x465e800 0x0)
0x108f58 : 0x7d8777 (0x465b100 0x0 0x4649880 0x49)
0x108f78 : 0x7d1c41 (0x4618400 0x0 0x4649880 0x49)
0x108f98 : 0x44800f (0x4649380 0x0 0x4649100 0x49)
0x108fd8 : 0x19ef9d (0x46967c20 0x0 0x0 0x4e8000)
0x46967cd8 : 0x135708 (0x0 0x57e31b54 0xe 0x53b568)
0x46967d28 : 0x135f10 (0x1 0x4597998 0x4599c7c 0x2)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleMCEDriver(1.1.7)@0x757000->0x75ffff
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x619000
com.apple.driver.AppleAPIC(1.2.0)@0x8d1000->0x8d3fff
com.apple.driver.AppleACPIPlatform(1.2.1)@0x7d0000->0x80cfff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x606000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x619000
BSD process name corresponding to current thread: launchctl
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)

Kernel panics are usually hardware.
Hold down 'd' key and it should boot into Apple Hardware Test, or insert your OEM install DVD to do so.
No, we are mere users and mortals and usually you need to do some troubleshooting by trial and error and testing. Schedule an appointment.
http://docs.info.apple.com/article.html?artnum=106227
http://www.macmaps.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

Similar Messages

Kernel panics every time (shut down your computer). When it stays on I get blotched video, left-over spots, tearig and then shut down your computer...

I use my PowerPC Quicksilver G4 (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
left-over spots, tearig and then shut down your computer...
I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
I am at the end of my know how. Thank you for any help
                                                                                                         W.W.
I am attaching the latest crashreport:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
Latest crash info for cpu 0:
   Exception state (sv=0x37D2EA00)
      PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
      Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
         0x00029234 0x000233F8 0x000ABEAC 0x5038514E
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.GeForce(4.1.8)@0x7ff000
            dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
            dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
            dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
            dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
   Exception state (sv=0x37D2EA00)
      previously dumped as "Latest" state. skipping...
   Exception state (sv=0x38A98780)
      PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
      Backtrace:
         0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
   Exception state (sv=0x37D2EA00)
      PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
      Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
         0x00029234 0x000233F8 0x000ABEAC 0x5038514E
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.GeForce(4.1.8)@0x7ff000
            dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
            dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
            dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
            dependency: com.apple.NVDAResman(4.1.8)@0x636000
   Exception state (sv=0x38A98780)
      PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4 (2.1), 867 MHz, 1.5 GB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
Modem: Spring, UCJ, V.90, 7.0F, á¸
Network Service: Built-in Ethernet, Ethernet, en0
Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA

Thank you for your reply BDAqua.
Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
Thank you again for your input BDAqua
                                                              W.W.

Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

Kernel panics are usually hardware.
Hold down 'd' key and it should boot into Apple Hardware Test, or insert your OEM install DVD to do so.
No, we are mere users and mortals and usually you need to do some troubleshooting by trial and error and testing. Schedule an appointment.
http://docs.info.apple.com/article.html?artnum=106227
http://www.macmaps.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Hi, I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, t

Hi,
I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
Please help I am going out my mind with this thing :(
Thanks x jade

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

How do I tell photoshop to stop opening the same document every time I start Photoshop CS6?

Hi all,
Each and every time I start up Photoshop CS6 (running the latest version I think....13.0.1 x64) on my Mac Running 10.7.5
the same document opens up. As if it thinks it crashed and needs to recover it. Im a member of Creative Cloud in case that matters.
I have saved the document and closed it properly and yet - it returns every time I start up the program. Can anyone help?
Its not a killer issue but extremely annoying.
thank you.
-wendy-

Yeah - literally can't find anything remotely similar. If anyone knows where I might find the thread to a fix I'd be mightly helpful.
Haven't a clue how to word to it any differently to try to find the answer.

HT3529 My group messaging on/off label isn't showing up at all. I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings Messages and I can't find any on/off sw

I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings>Messages and I can't find any on/off switch.

Hello there, Idaniabb.
The following Knowledge Base article offers up some great information in regards to group messaging and also links to another excellent resource for troubleshooting messages as well:
iOS: Understanding group messaging
http://support.apple.com/kb/HT5760
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Every time I start up my computer and load firefox, the theme I was using is not showing up.

Every time I start up my computer and load Firefox, the theme I was using has gone back to the default one. The theme is still on my computer and it works if I change it back, I just don't know why it won't show up when I first load Firefox.
== This happened ==
Every time Firefox opened

See http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

Every time I start Fire fox an error appears that reads UNABLE TO CONNECT. I believe I accidently hit BLOCK rather then ALLOW. How to I reverse my mistake?

Every time I start Fire fox an error appears that reads......
Firefox can't establish a connection to the server at www.yahoo.com.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.

Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes.

ITunes Setup Assistant runs every time I start iTunes 7.3.1.3

The past 2 iterations of iTunes have had the same problem for me - even though the program is installed already, it doesn't save my settings and runs the setup assistant every time I start the application. I've gone through the assistant twice and put everything as I had it previously but, once I close the program and restart, the assistant pops up again and my settings are gone. I never had this problem until 7.3 or 7.3.1 and it's very frustrating... (>_<)<br>
IBM T43 Windows XP Pro 2.0 ghz Pentium M, 1 gig ram

Well, iTunes appears to finally work correctly. I don't know exactly why this is but it's due to one of three possible things. First, I uninstalled the 2 programs that I had installed to monitor what music I played for their services. These programs were Last.fm for Windows Version 1.3.1.1 iTunes plugin version 2.0.11.0 and Virb.com iTunes Plugin Version 1.0.0.5. Finally, instead of using the Apple Software Update on my computer as I had previously, this time I went directly to Apple's website, downloaded the entire iTunes + Quicktime install package, and reinstalled from that. After doing so, the Setup Assistant ran again but finally remembered my altered settings upon program restart. Now that iTunes was working properly, I have reinstalled both plugins and they now appear to function properly without negatively affecting iTunes. I hope this helps people who have also installed plugins to monitor their music listening patterns and had problems with the latest iTunes update.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

See also https://forums.adobe.com/thread/1654402

Reader 9.3.3 installs every time I start up my PC

I'm on Windows XP Professional, v 5.1.2600, Service Pack 2.
A while back I tried downloading and installing Adobe Reader 9.3.3 as an update to the old Reader I had. It never installed properly -- constant error messages, and it somehow wiped out the old Reader, too. IT told me about the FoxIt pdf reader, which I installed on a temporary basis until IT could get over here to investigate the Adobe Reader problem. While FoxIt was installed, I noticed that Adobe Reader 9.3.3 would attempt to install itself every. single. time. I. started. the. PC. Unsuccessfully! IT eventually came over to uninstall FoxIt and they found a way to successfully install Reader 9.3.3, but this application STILL tries to install itself every time I start up.
How do I get this to stop???? They tell me it has something to do with a script that's being called forth at startup ... ?????

I found the following Adobe-related applications in the startup tab when I ran msconfig:
Reader_sl.exe
AdobeARM.exe
Acrotray.exe
Acrobat_sl.exe
Unchecking their boxes did not solve the problem. Abobe Reader 9.3.3 still installs itself upon every startup, making startup last a full 6 minutes.
Are there any other suggestions about how to fix this?
P.S. When I look in Add/Remove Programs within the control panel, I see that I have Adobe Acrobat 9 (v. 9.0.0), Acrobat.com (v. 2.1.0.0), and something that labels itself Adobe Reader 9.3.2, but it is actually version 9.3.3.

KERNAL PANIC EVERY TIME I START UP

Similar Messages

Maybe you are looking for