Kernal panic (freezes when starting sometimes).
Having a problem when my Mac starts, on occassion, and it's becoming infuriating (well, it's always infuriating.) Here's the report:
Interval Since Last Panic Report: 143909 sec
Panics Since Last Report: 1
Anonymous UUID: A8804C56-2919-4681-B33C-055524BFF1C3
Wed May 28 14:13:55 2014
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x7dda7127, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x01c15000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000036, ECX: 0x05afc514, EDX: 0x0001a9c8
CR2: 0x00000000, EBP: 0x00108b18, ESI: 0x05afa4c0, EDI: 0x00108ff0
EFL: 0x00010006, EIP: 0x7dda7127, CS: 0x00000008, DS: 0x00520010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x108918 : 0x12b4c6 (0x45f91c 0x10894c 0x13355c 0x0)
0x108968 : 0x1ab0fe (0x469a98 0x7dda7127 0xe 0x469248)
0x108a48 : 0x1a1713 (0x108a60 0x108ab4 0x108b18 0x7dda7127)
0x108a58 : 0x7dda7127 (0xe 0x6d340048 0x10 0x10)
0x108b18 : 0x7dda7c6e (0x0 0x2f 0x12 0x0)
0x108b58 : 0x7dda7dd3 (0x0 0x0 0x0 0x528ce8)
0x108cb8 : 0x7dda7f31 (0x1 0x4 0x7ddb2a48 0x0)
0x108cf8 : 0x7dda7d4f (0x4 0x7ddb2a48 0x0 0x0)
0x108d38 : 0x7dd9c3e9 (0x7ddb3f0c 0x7ddb49e0 0x0 0x0)
0x108d98 : 0x7dd955dc (0x50f0e10 0x108e58 0x1 0x1)
0x108dd8 : 0x7dd97b92 (0x50f0e10 0x7ddba0fc 0x108e58 0x40)
0x108e08 : 0x7dd97bc7 (0x50f0e10 0x8 0x108e58 0x0)
0x108e38 : 0x7dd947e5 (0x50f0e10 0x8 0x108e58 0x4fc9e80)
0x108ea8 : 0x7dda3a30 (0x50f0e10 0x7ddb8594 0x10 0x428f13)
0x108ed8 : 0x7dd7e0d7 (0x4f4bd54 0x7df07000 0xd 0x7ddb8594)
0x108f08 : 0x7dd01cbd (0x5afa4c0 0x36 0x64b87000 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.kext.ATY_Lamna(5.4.8)@0x7dd48000->0x7ddc1fff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x7dcf7000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x733ba000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x7dd0b000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x733d1000
com.apple.iokit.IONDRVSupport(1.7.3)@0x7dcf7000->0x7dd04fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x733ba000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x7dd0b000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 305080005597
unloaded kexts:
(none)
loaded kexts:
com.digidesign.iokit.DigiDal 8.0.1f1 - last loaded 304414416658
com.digidesign.iokit.DigiIO 8.0.1f1
com.apple.filesystems.autofs 2.0.2
com.apple.kext.ATY_Lamna 5.4.8
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.CSRUSBBluetoothHCIController 2.1.9f10
com.apple.driver.AppleUSBHIDMouse 1.2.4b3
com.apple.driver.AppleHIDKeyboard 1.0.9b4
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.driver.CSRHIDTransitionDriver 2.1.9f10
com.apple.driver.iTunesPhoneDriver 1.0
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.IOUSBMassStorageClass 2.0.8
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.XsanFilter 2.7.91
com.apple.driver.AppleIntel8254XEthernet 2.1.2b1
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AirPortBrcm43xx 367.91.22
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.TMSafetyNet 3
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.9f10
com.apple.iokit.IOBluetoothFamily 2.1.9f10
com.apple.driver.AppleHIDMouse 1.2.4b3
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
Hi Scott Mosher!
I have an article here for you that will help you troubleshoot this issue with kernel panics:
OS X: About kernel panics
http://support.apple.com/kb/ts3742
See the section toward the bottom of the article labeled “Troubleshooting a recurring kernel panic,” but keep in mind this statement in that section:
Diagnosing a recurring kernel panic can be difficult. If you would like to avoid this process, or do not know how to perform any of the following steps, consider bringing the Mac to a Genius at an Apple Store or an Apple Authorized Service Provider for assistance. Be sure to ask that, if the drive needs reformatting or replacing, they contact you about escalating your case to a special data recovery service. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Thanks for coming to the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
CS3 freezes when started on Mavericks
CS3 freezes when started on newly installed Mavericks (from 10.8). Last files are displayed and Regster window appears and then freezes up. Necessary to Force Quit to get out. I've "successfully" re-installed CS3 several times but the problem continues. What gives?
http://forums.adobe.com/thread/1342453?tstart=0
Mylenium -
Booting freeze when starting setup virtual console
Sometimes the computer will freeze when booting into
Started setup virtual console
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.5-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 10 07:10:15 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000376b0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000376b1000-0x00000000376b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000376b7000-0x00000000377b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000377ba000-0x000000003780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003780f000-0x0000000037907fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037908000-0x0000000037b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b0f000-0x0000000037b17fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b18000-0x0000000037b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b1f000-0x0000000037b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b63000-0x0000000037b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037b9f000-0x0000000037bdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037be0000-0x0000000037bfcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037bfd000-0x0000000037bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037c00000-0x0000000037dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000038000000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 2847A65/2847A65, BIOS 6JET85WW (1.43 ) 12/24/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37c00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 038000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask FC0000000 write-back
[ 0.000000] 3 base 037E00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f74c0-0x000f74cf] mapped at [c00f74c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x376b0fff]
[ 0.000000] [mem 0x37400000-0x376b0fff] page 4k
[ 0.000000] BRK [0x0179e000, 0x0179efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x376b7000-0x377b9fff]
[ 0.000000] [mem 0x376b7000-0x377b9fff] page 4k
[ 0.000000] RAMDISK: [mem 0x36ac0000-0x36dfcfff]
[ 0.000000] ACPI: RSDP 0x000F7190 000024 (v04 PTLTD )
[ 0.000000] ACPI: XSDT 0x37BF2BBD 000064 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: FACP 0x37BE4000 0000F4 (v03 LENOVO TP-6J 00001430 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x37BE5000 00A14B (v02 LENOVO TP-6J 00001430 INTL 20050624)
[ 0.000000] ACPI: FACS 0x37B9EFC0 000040
[ 0.000000] ACPI: HPET 0x37BFCEFC 000038 (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x37BFCF34 00003C (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x37BFCF70 000068 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x37BFCFD8 000028 (v01 LENOVO TP-6J 00001430 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x37BE3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE1000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377ba000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37bfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x376b0fff]
[ 0.000000] node 0: [mem 0x376b7000-0x377b9fff]
[ 0.000000] node 0: [mem 0x3780f000-0x37907fff]
[ 0.000000] node 0: [mem 0x37b0f000-0x37b17fff]
[ 0.000000] node 0: [mem 0x37b1f000-0x37b62fff]
[ 0.000000] node 0: [mem 0x37b9f000-0x37bdffff]
[ 0.000000] node 0: [mem 0x37bfd000-0x37bfffff]
[ 0.000000] On node 0 totalpages: 227548
[ 0.000000] free_area_init_node: node 0, pgdat c1601e00, node_mem_map f6fb9020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223156 pages, LIFO batch:31
[ 0.000000] HighMem zone: 9 pages used for memmap
[ 0.000000] HighMem zone: 394 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x38000000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x376b1000-0x376b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x377ba000-0x3780efff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7798000 s33856 r0 d23488 u57344
[ 0.000000] pcpu-alloc: s33856 r0 d23488 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225772
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3bfa8024-2f62-4818-9393-5874bfc69f25 rw
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 1826808 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037c00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 889132K/910192K available (4447K kernel code, 481K rwdata, 1288K rodata, 564K init, 956K bss, 21060K reserved, 1576K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1616000 - 0xc16a3000 ( 564 kB)
.data : 0xc14582aa - 0xc1614400 (1776 kB)
.text : 0xc1000000 - 0xc14582aa (4448 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.872 MHz processor
[ 0.003345] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.31 BogoMIPS (lpj=6982906)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003355] ACPI: Core revision 20140214
[ 0.019690] ACPI: All ACPI Tables successfully acquired
[ 0.020050] Security Framework initialized
[ 0.020059] Yama: becoming mindful.
[ 0.020075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020299] Initializing cgroup subsys memory
[ 0.020305] Initializing cgroup subsys devices
[ 0.020307] Initializing cgroup subsys freezer
[ 0.020309] Initializing cgroup subsys net_cls
[ 0.020313] Initializing cgroup subsys blkio
[ 0.020338] CPU: Physical Processor ID: 0
[ 0.020339] CPU: Processor Core ID: 0
[ 0.020342] mce: CPU supports 6 MCE banks
[ 0.020351] CPU0: Thermal monitoring enabled (TM1)
[ 0.020359] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.020459] Freeing SMP alternatives memory: 16K (c16a3000 - c16a7000)
[ 0.021230] ftrace: allocating 19105 entries in 38 pages
[ 0.026774] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061993] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3500 @ 2.10GHz (fam: 06, model: 17, stepping: 0a)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076738] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083404] CPU 1 irqstacks, hard=f6516000 soft=f6518000
[ 0.083406] x86: Booting SMP configuration:
[ 0.083408] .... node #0, CPUs: #1
[ 0.006666] Initializing CPU#1
[ 0.096574] x86: Booted up 1 node, 2 CPUs
[ 0.096579] smpboot: Total of 2 processors activated (8382.63 BogoMIPS)
[ 0.096809] devtmpfs: initialized
[ 0.096921] PM: Registering ACPI NVS region [mem 0x37b63000-0x37b9efff] (245760 bytes)
[ 0.097916] pinctrl core: initialized pinctrl subsystem
[ 0.097971] RTC time: 21:12:51, date: 07/24/14
[ 0.098030] NET: Registered protocol family 16
[ 0.098149] cpuidle: using governor ladder
[ 0.098151] cpuidle: using governor menu
[ 0.098199] ACPI: bus type PCI registered
[ 0.098202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098302] PCI: Using MMCONFIG for extended config space
[ 0.098303] PCI: Using configuration type 1 for base access
[ 0.098392] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.098393] mtrr: probably your BIOS does not setup all CPUs.
[ 0.098395] mtrr: corrected configuration.
[ 0.100073] ACPI: Added _OSI(Module Device)
[ 0.100073] ACPI: Added _OSI(Processor Device)
[ 0.100073] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100073] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107995] ACPI: SSDT 0x37B18620 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.108621] ACPI: Dynamic OEM Table Load:
[ 0.108624] ACPI: SSDT 0x00000000 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.116947] ACPI: SSDT 0x37B19F20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.117393] ACPI: Dynamic OEM Table Load:
[ 0.117395] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.130189] ACPI: Interpreter enabled
[ 0.130202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.130208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.130226] ACPI: (supports S0 S3 S4 S5)
[ 0.130228] ACPI: Using IOAPIC for interrupt routing
[ 0.130267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.144315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144322] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145146] PCI host bridge to bus 0000:00
[ 0.145151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145156] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145163] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145166] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145168] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.145181] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.145206] DMAR: Forcing write-buffer flush capability
[ 0.145208] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.145311] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.145327] pci 0000:00:02.0: reg 0x10: [mem 0xf2400000-0xf27fffff 64bit]
[ 0.145336] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145343] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.145462] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.145475] pci 0000:00:02.1: reg 0x10: [mem 0xf2100000-0xf21fffff 64bit]
[ 0.145642] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.145703] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
[ 0.145829] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.145893] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.145953] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
[ 0.146079] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.146141] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
[ 0.146201] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.146201] pci 0000:00:1a.7: reg 0x10: [mem 0xf2a04000-0xf2a043ff]
[ 0.146201] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.146201] pci 0000:00:1b.0: reg 0x10: [mem 0xf2a00000-0xf2a03fff 64bit]
[ 0.146201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
[ 0.146201] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
[ 0.146201] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.146201] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.146266] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.146294] pci 0000:00:1d.7: reg 0x10: [mem 0xf2a04400-0xf2a047ff]
[ 0.146416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.146489] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.146551] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.146682] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.146745] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.146992] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[ 0.147016] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.147028] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.147040] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.147053] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.147065] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
[ 0.147077] pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
[ 0.147093] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147095] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.147098] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.147100] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.147232] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.147255] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.147286] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.147516] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 0.147544] pci 0000:02:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[ 0.147763] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.147840] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 0.147866] pci 0000:02:00.2: reg 0x10: [mem 0xf2300400-0xf23004ff]
[ 0.148142] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 0.148168] pci 0000:02:00.3: reg 0x10: [mem 0xf2300800-0xf23008ff]
[ 0.148441] pci 0000:02:00.4: [197b:2384] type 00 class 0x088000
[ 0.148466] pci 0000:02:00.4: reg 0x10: [mem 0xf2300c00-0xf2300cff]
[ 0.156695] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.156703] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.156802] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.156907] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.157034] pci 0000:05:00.0: [10ec:8172] type 00 class 0x028000
[ 0.157059] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.157076] pci 0000:05:00.0: reg 0x14: [mem 0xf2200000-0xf2203fff]
[ 0.157243] pci 0000:05:00.0: supports D1 D2
[ 0.157245] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.157285] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.166686] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.166691] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.166697] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.166813] acpiphp: Slot [1] registered
[ 0.166820] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.166826] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.166831] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.166839] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.167015] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[ 0.167081] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.167195] pci 0000:08:00.0: reg 0x18: [mem 0xf2010000-0xf2010fff 64bit pref]
[ 0.167267] pci 0000:08:00.0: reg 0x20: [mem 0xf2000000-0xf200ffff 64bit pref]
[ 0.167309] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.167631] pci 0000:08:00.0: supports D1 D2
[ 0.167633] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167765] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.167881] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.167886] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.167897] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.168016] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.168030] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.168033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.168036] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.168038] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.168041] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.168043] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.168045] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.168116] pci_bus 0000:00: on NUMA node 0
[ 0.168358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.168494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168563] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.168695] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168761] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168827] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.173479] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.173591] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173669] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173669] vgaarb: loaded
[ 0.173669] vgaarb: bridge control possible 0000:00:02.0
[ 0.173669] PCI: Using ACPI for IRQ routing
[ 0.185061] PCI: pci_cache_line_size set to 64 bytes
[ 0.185173] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.185176] e820: reserve RAM buffer [mem 0x376b1000-0x37ffffff]
[ 0.185179] e820: reserve RAM buffer [mem 0x377ba000-0x37ffffff]
[ 0.185182] e820: reserve RAM buffer [mem 0x37908000-0x37ffffff]
[ 0.185184] e820: reserve RAM buffer [mem 0x37b18000-0x37ffffff]
[ 0.185187] e820: reserve RAM buffer [mem 0x37b63000-0x37ffffff]
[ 0.185189] e820: reserve RAM buffer [mem 0x37be0000-0x37ffffff]
[ 0.185191] e820: reserve RAM buffer [mem 0x37c00000-0x37ffffff]
[ 0.185330] NetLabel: Initializing
[ 0.185332] NetLabel: domain hash size = 128
[ 0.185334] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185348] NetLabel: unlabeled traffic allowed by default
[ 0.185378] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.185385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.185390] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.186692] Switched to clocksource hpet
[ 0.194447] pnp: PnP ACPI init
[ 0.194476] ACPI: bus type PNP registered
[ 0.194565] pnp 00:00: [dma 4]
[ 0.194604] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.194647] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.194818] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.194823] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.194877] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.194964] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.194967] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.194970] system 00:04: [io 0xffff] has been reserved
[ 0.194972] system 00:04: [io 0xffff] has been reserved
[ 0.194975] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.194978] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.194981] system 00:04: [io 0x1600-0x16fe] has been reserved
[ 0.194983] system 00:04: [io 0xfe00] has been reserved
[ 0.194986] system 00:04: [io 0x0700-0x070f] has been reserved
[ 0.194990] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195039] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195106] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.195153] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.195390] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195393] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.195396] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195399] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195402] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.195405] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195407] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.195411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195901] pnp: PnP ACPI: found 9 devices
[ 0.195903] ACPI: bus type PNP unregistered
[ 0.233524] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.233530] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.233542] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.233546] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.233549] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.233561] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.233564] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.233567] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.233579] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.233599] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 400000
[ 0.233618] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233621] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233624] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233627] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233630] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233632] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233635] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.233638] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233641] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233643] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233651] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233656] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.233660] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233664] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.233668] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233672] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233676] pci 0000:00:1c.5: BAR 14: assigned [mem 0x40c00000-0x410fffff]
[ 0.233680] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.233683] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.233687] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.233691] pci 0000:00:1f.3: BAR 0: assigned [mem 0x41100000-0x411000ff 64bit]
[ 0.233705] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.233709] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.233716] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233729] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.233732] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.233739] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.233744] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233752] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.233756] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.233763] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.233768] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233776] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.233779] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.233786] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.233791] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233799] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.233803] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.233809] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.233814] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233823] pci 0000:08:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
[ 0.233826] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.233830] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.233836] pci 0000:00:1c.5: bridge window [mem 0x40c00000-0x410fffff]
[ 0.233841] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233849] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.233864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.233867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.233870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233872] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233874] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233877] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233879] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233882] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.233884] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.233887] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233890] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.233892] pci_bus 0000:03: resource 1 [mem 0x40200000-0x403fffff]
[ 0.233895] pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233897] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.233900] pci_bus 0000:04: resource 1 [mem 0x40600000-0x407fffff]
[ 0.233902] pci_bus 0000:04: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233905] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.233907] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.233910] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233912] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.233915] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.233917] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233920] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.233922] pci_bus 0000:08: resource 1 [mem 0x40c00000-0x410fffff]
[ 0.233924] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233927] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.233929] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.233932] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233934] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233937] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233939] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233941] pci_bus 0000:09: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233974] NET: Registered protocol family 2
[ 0.234147] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.234165] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234196] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234229] TCP: reno registered
[ 0.234232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234288] NET: Registered protocol family 1
[ 0.234306] pci 0000:00:02.0: Boot video device
[ 0.247385] PCI: CLS 64 bytes, default 64
[ 0.247444] Unpacking initramfs...
[ 0.327321] Freeing initrd memory: 3316K (f6ac0000 - f6dfd000)
[ 0.327360] Simple Boot Flag at 0x36 set to 0x1
[ 0.327537] apm: BIOS not found.
[ 0.327589] Scanning for low memory corruption every 60 seconds
[ 0.328006] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342512] bounce pool size: 64 pages
[ 0.342526] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344771] zbud: loaded
[ 0.344889] VFS: Disk quotas dquot_6.5.2
[ 0.344943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.345132] msgmni has been set to 1740
[ 0.345203] Key type big_key registered
[ 0.345390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.345431] io scheduler noop registered
[ 0.345433] io scheduler deadline registered
[ 0.345477] io scheduler cfq registered (default)
[ 0.345722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.345914] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.346095] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.346276] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.346459] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.346643] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.346801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.346826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.346866] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.346868] vesafb: scrolling: redraw
[ 0.346870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.347265] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.371347] Console: switching to colour frame buffer device 128x48
[ 0.395282] fb0: VESA VGA frame buffer device
[ 0.395302] intel_idle: does not run on family 6 model 23
[ 0.395336] GHES: HEST is not enabled!
[ 0.395353] isapnp: Scanning for PnP cards...
[ 0.708652] isapnp: No Plug & Play device found
[ 0.708714] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.709479] rtc_cmos 00:05: RTC can wake from S4
[ 0.709659] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.709696] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.709734] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.709873] TCP: cubic registered
[ 0.710038] NET: Registered protocol family 10
[ 0.710291] NET: Registered protocol family 17
[ 0.710470] Using IPI No-Shortcut mode
[ 0.710614] registered taskstats version 1
[ 0.711361] Magic number: 6:207:248
[ 0.711441] rtc_cmos 00:05: setting system clock to 2014-07-24 21:12:51 UTC (1406236371)
[ 0.711573] PM: Hibernation image not present or could not be loaded.
[ 0.711816] Freeing unused kernel memory: 564K (c1616000 - c16a3000)
[ 0.711835] Write protecting the kernel text: 4452k
[ 0.711865] Write protecting the kernel read-only data: 1292k
[ 0.720349] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.722097] systemd-udevd[47]: starting version 215
[ 0.747046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.754102] ACPI: bus type USB registered
[ 0.754142] usbcore: registered new interface driver usbfs
[ 0.754158] usbcore: registered new interface driver hub
[ 0.757660] usbcore: registered new device driver usb
[ 0.757853] sdhci: Secure Digital Host Controller Interface driver
[ 0.757856] sdhci: Copyright(c) Pierre Ossman
[ 0.758255] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 20)
[ 0.758310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.758388] mmc0: no vqmmc regulator found
[ 0.758390] mmc0: no vmmc regulator found
[ 0.758524] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.758563] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 20)
[ 0.758628] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 0.758728] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.758864] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.758874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.758884] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.758909] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.759248] ehci-pci: EHCI PCI platform driver
[ 0.760108] hub 1-0:1.0: USB hub found
[ 0.760122] hub 1-0:1.0: 2 ports detected
[ 0.760528] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.760536] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.760554] ehci-pci 0000:00:1a.7: debug port 1
[ 0.760989] i8042: Detected active multiplexing controller, rev 1.1
[ 0.764322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.764416] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.764455] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.764469] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.764487] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2a04000
[ 0.764496] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.769729] SCSI subsystem initialized
[ 0.771540] libata version 3.00 loaded.
[ 0.773372] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.773646] hub 2-0:1.0: USB hub found
[ 0.773657] hub 2-0:1.0: 6 ports detected
[ 0.796797] hub 1-0:1.0: USB hub found
[ 0.796811] hub 1-0:1.0: 2 ports detected
[ 0.797077] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.797086] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.797104] ehci-pci 0000:00:1d.7: debug port 1
[ 0.801001] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.801026] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2a04400
[ 0.810017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.810266] hub 3-0:1.0: USB hub found
[ 0.810277] hub 3-0:1.0: 6 ports detected
[ 0.810637] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.810645] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.810654] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.810690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.810912] hub 4-0:1.0: USB hub found
[ 0.810922] hub 4-0:1.0: 2 ports detected
[ 0.811160] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.811169] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.811178] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.811202] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.811580] hub 5-0:1.0: USB hub found
[ 0.811590] hub 5-0:1.0: 2 ports detected
[ 0.811840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.811847] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.811857] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.811879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.812130] hub 6-0:1.0: USB hub found
[ 0.812140] hub 6-0:1.0: 2 ports detected
[ 0.812412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.812422] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.812431] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.812458] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.812718] hub 7-0:1.0: USB hub found
[ 0.812728] hub 7-0:1.0: 2 ports detected
[ 0.813015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.813023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.813033] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.813072] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.813371] hub 8-0:1.0: USB hub found
[ 0.813381] hub 8-0:1.0: 2 ports detected
[ 0.813569] ata_piix 0000:00:1f.2: version 2.13
[ 0.813680] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.816969] scsi0 : ata_piix
[ 0.817145] scsi1 : ata_piix
[ 0.817232] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 0.817238] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 0.842971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.116709] usb 3-6: new high-speed USB device number 2 using ehci-pci
[ 1.290069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.290196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.297007] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0A, SB31, max UDMA/100
[ 1.297157] ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133
[ 1.297160] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.310274] ata2.00: configured for UDMA/100
[ 1.310518] ata1.00: configured for UDMA/133
[ 1.310653] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5
[ 1.314042] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A0A SB31 PQ: 0 ANSI: 5
[ 1.330035] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 1.330632] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.330736] sd 0:0:0:0: [sda] Write Protect is off
[ 1.330740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.330778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339509] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.339512] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.339697] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.410766] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.411402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.330087] Switched to clocksource tsc
[ 2.977672] random: nonblocking pool is initialized
[ 4.813882] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.660514] systemd[1]: systemd 215 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 5.660690] systemd[1]: Detected architecture 'x86'.
[ 5.713519] systemd[1]: Set hostname to <Thinkpad-SL510>.
[ 7.304701] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.304780] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.304796] systemd[1]: Starting Remote File Systems.
[ 7.305131] systemd[1]: Reached target Remote File Systems.
[ 7.305165] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.305725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.305745] systemd[1]: Starting Encrypted Volumes.
[ 7.306028] systemd[1]: Reached target Encrypted Volumes.
[ 7.306050] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.306094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.306107] systemd[1]: Starting Paths.
[ 7.306343] systemd[1]: Reached target Paths.
[ 7.306360] systemd[1]: Expecting device dev-disk-by\x2duuid-0da676d3\x2de00d\x2d4408\x2da0e4\x2d61af4ccfed22.device...
[ 7.306889] systemd[1]: Expecting device dev-disk-by\x2duuid-37e41bc7\x2daf4c\x2d4c7f\x2d97ff\x2decc785cc6263.device...
[ 7.307389] systemd[1]: Expecting device dev-disk-by\x2duuid-6692aca0\x2d5948\x2d4835\x2dadb5\x2d51941a76128f.device...
[ 7.307887] systemd[1]: Expecting device dev-disk-by\x2duuid-8829a0cf\x2da620\x2d438d\x2d8d1a\x2de386af97280f.device...
[ 7.308384] systemd[1]: Starting Root Slice.
[ 7.315232] systemd[1]: Created slice Root Slice.
[ 7.315253] systemd[1]: Starting User and Session Slice.
[ 7.315767] systemd[1]: Created slice User and Session Slice.
[ 7.315784] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.316114] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.316130] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.316519] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.316536] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.316926] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.316943] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.317282] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.317297] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.317631] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.317651] systemd[1]: Starting udev Kernel Socket.
[ 7.317945] systemd[1]: Listening on udev Kernel Socket.
[ 7.317963] systemd[1]: Starting udev Control Socket.
[ 7.318263] systemd[1]: Listening on udev Control Socket.
[ 7.318284] systemd[1]: Starting Journal Socket.
[ 7.318577] systemd[1]: Listening on Journal Socket.
[ 7.318611] systemd[1]: Starting System Slice.
[ 7.319093] systemd[1]: Created slice System Slice.
[ 7.319121] systemd[1]: Started File System Check on Root Device.
[ 7.319134] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 7.319690] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.346175] systemd[1]: Mounting Temporary Directory...
[ 7.355475] systemd[1]: Starting system-getty.slice.
[ 7.356130] systemd[1]: Created slice system-getty.slice.
[ 7.405020] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.405060] systemd[1]: Starting Setup Virtual Console...
[ 7.434270] systemd[1]: Starting Load Kernel Modules...
[ 7.435152] systemd[1]: Mounting Huge Pages File System...
[ 7.450675] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.451757] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.452682] systemd[1]: Mounting Debug File System...
[ 7.453572] systemd[1]: Starting udev Coldplug all Devices...
[ 7.454542] systemd[1]: Starting Journal Service...
[ 7.455770] systemd[1]: Started Journal Service.
[ 8.017658] vboxdrv: Found 2 processor cores.
[ 8.017849] vboxdrv: fAsync=0 offMin=0x19a offMax=0x113a
[ 8.017936] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.017938] vboxdrv: Successfully loaded version 4.3.12_OSE (interface 0x001a0007).
[ 8.066565] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.453787] systemd-udevd[137]: starting version 215
[ 9.297221] Monitor-Mwait will be used to enter C-1 state
[ 9.297230] Monitor-Mwait will be used to enter C-2 state
[ 9.297235] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.297251] ACPI: acpi_idle registered with cpuidle
[ 9.297798] Switched to clocksource hpet
[ 9.397577] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 9.398331] ACPI: Lid Switch [LID]
[ 9.398442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 9.398448] ACPI: Power Button [PWRB]
[ 9.398520] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 9.398523] ACPI: Sleep Button [SLPB]
[ 9.398594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 9.398597] ACPI: Power Button [PWRF]
[ 9.714253] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.714258] ACPI: Thermal Zone [TZ00] (38 C)
[ 9.788226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.107244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.107258] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.107608] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[ 10.107894] r8169 0000:08:00.0 eth0: RTL8102e at 0xf8e0e000, 60:eb:69:df:fc:5b, XID 04c00000 IRQ 46
[ 10.138235] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.151012] Linux agpgart interface v0.103
[ 10.156788] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.156794] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.156797] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.156799] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.156801] sound hdaudioC0D0: inputs:
[ 10.156804] sound hdaudioC0D0: Mic=0x18
[ 10.156807] sound hdaudioC0D0: Internal Mic=0x12
[ 10.187737] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140214/utaddress-258)
[ 10.187746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187751] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187757] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187760] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187762] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.200980] ACPI: Battery Slot [BAT1] (battery present)
[ 10.307840] [drm] Initialized drm 1.1.0 20060810
[ 10.331834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 10.332165] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.332219] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.332274] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.346048] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 10.346167] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.346796] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 10.346977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.403254] ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 10.403262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.407145] ACPI: AC Adapter [ACAD] (on-line)
[ 10.407653] wmi: Mapper loaded
[ 10.462739] Non-volatile memory driver v1.3
[ 10.483086] cfg80211: Calling CRDA to update world regulatory domain
[ 10.511461] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 10.511465] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.511467] thinkpad_acpi: ThinkPad BIOS 6JET85WW (1.43 ), EC 6JHT66WW-1.186000
[ 10.511469] thinkpad_acpi: Lenovo ThinkPad SL510, model 2847A65
[ 10.513121] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 10.517198] thinkpad_acpi: radio switch found; radios are enabled
[ 10.517210] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.517319] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 10.517321] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 10.518287] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 10.617843] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 10.617954] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.640485] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
[ 10.717742] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 10.928161] media: Linux media interface: v0.10
[ 11.006082] iTCO_vendor_support: vendor-support=0
[ 11.008425] Linux video capture interface: v2.00
[ 11.015257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.015302] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.015485] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.050172] systemd-udevd[146]: renamed network interface eth0 to enp8s0
[ 11.084784] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 11.084877] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 11.401469] [drm] Memory usable by graphics device = 2048M
[ 11.401476] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 11.401478] fb: switching to inteldrmfb from VESA VGA
[ 11.401504] Console: switching to colour dummy device 80x25
[ 11.423441] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 11.423454] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.423456] [drm] Driver supports precise vblank timestamp query.
[ 11.423531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.474103] rtl8192se: FW Power Save off (module option)
[ 11.474191] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 11.539577] fbcon: inteldrmfb (fb0) is primary device
[ 11.568063] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 11.568068] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 11.625453] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
[ 11.649292] mousedev: PS/2 mouse device common for all mice
[ 11.819295] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:481c)
[ 11.832647] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.0/input/input19
[ 11.832785] usbcore: registered new interface driver uvcvideo
[ 11.832786] USB Video Class driver (1.1.1)
[ 11.900636] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.912613] systemd-udevd[144]: renamed network interface wlan0 to wlp5s0
[ 12.173403] Console: switching to colour frame buffer device 170x48
[ 12.178613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.178615] i915 0000:00:02.0: registered panic notifier
[ 12.191803] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.193501] acpi device:06: registered as cooling_device2
[ 12.193604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 12.193997] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.246859] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 13.644561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.954050] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.071585] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.166537] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 16.054096] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 16.358428] psmouse serio5: hgpk: ID: 10 00 64
[ 18.270058] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.588710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input18
[ 20.986088] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 20.997921] r8169 0000:08:00.0 enp8s0: link down
[ 20.997967] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 23.204726] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.231917] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.233796] wlp5s0: authenticated
[ 23.237347] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.241118] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.242837] wlp5s0: associated
[ 23.242852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.407416] wlp5s0: deauthenticating from 8c:21:0a:77:4c:32 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.443391] cfg80211: Calling CRDA for country: US
[ 23.443467] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.463399] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.465298] wlp5s0: authenticated
[ 23.466930] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.471099] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.472786] wlp5s0: associated
[ 391.317544] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 495.430421] perf interrupt took too long (2517 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 526.290766] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 646.953268] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 767.198414] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
Last edited by jazzi (2014-07-31 12:22:09)jazzi wrote:Sometimes the computer will freeze when booting into start virtual console.
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
You have to give us a hint.
What is your processor?
How much RAM have you?
What is your video card/ship set?
What kernel are you running?
I spotted this in your dump:
[drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
In this case, drm means Direct Rendering Management and has to do with your Video subsystem. An interrupt is where the hardware sends a signal to the processor that something has happened that requires the urgent attention of the processor. The kernel is protesting that the hardware is barraging it with interrupt requests. -
New MBP: Kernal Panic on 2nd start-up
No third-party apps have been installed on this thing yet. Opened it up, went through registration process, software update and the subsequent restart. closed the machine after browsing the web for 5 min. This morning, instead of waking up, I get the start-up tone followed by black screen. After a force shutdown/restart, it freezes. On the next attempt to restart, it starts up but gives the message below. Is this a sign of a dud machine or should I not be worried? Any advice on preventing future occurances of this?
----panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x2b0e9ec8, CR3: 0x01ee0000, CR4: 0x000006e0
EAX: 0x00cfcf00, EBX: 0x00409ce1, ECX: 0x00cfcfcf, EDX: 0x0000cf00
CR2: 0x2b0e9ec8, EBP: 0x14913cd8, ESI: 0x2b0e9ec8, EDI: 0x00000006
EFL: 0x00010006, EIP: 0x0037c6d7, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x14913a08 : 0x128d08 (0x3c9afc 0x14913a2c 0x131de5 0x0)
0x14913a48 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x14913b58 : 0x19a904 (0x14913b70 0x0 0x14913b88 0x131d98)
0x14913cd8 : 0x37cb9d (0x109380 0x2ac67000 0x0 0xb)
0x14913d98 : 0x1aa34c (0x3d0740 0x1 0x0 0x120)
0x14913dc8 : 0x6833ec (0x6831d6 0x3 0x6b3c80 0x0)
0x14913e28 : 0x678446 (0x3134800 0x2 0x14913dfc 0x30e3060)
0x14913e48 : 0x3a9969 (0x318cc80 0x4ad634 0x14913e88 0x3c8a34)
0x14913e88 : 0x3b8bc8 (0x3134800 0x3ef2d8 0x30df348 0x38f10b)
0x14913ec8 : 0x392599 (0x30df100 0x4 0x1d 0x2)
0x14913f08 : 0x392acf (0x30df100 0x0 0x14913f38 0x3478530)
0x14913f28 : 0x394b24 (0x30df100 0x0 0x310b8a8 0x37f0be)
0x14913f58 : 0x39814b (0x310b880 0x135eb4 0x0 0x30d9144)
0x14913f88 : 0x397e81 (0x310b840 0x0 0x8000 0xf0b)
0x14913fc8 : 0x19a77c (0x310b840 0x0 0x19d0b5 0x30d6f5c) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.0.5)@0x677000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x580000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x673000
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Model: MacBookPro2,2, BootROM MBP22.00A5.B01, 2 processors, Intel Core 2 Duo, 2.16 GHz, 1 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: AirPort Extreme, 1.0.46
Bluetooth: Version 1.7.11f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mAHi, I'm having a similar problem, I have had my macbook pro since late jan, not long after getting it back home to the uk as I bought it in the us I started having kernal panics, spoke to the apple care team they told me to archive and install and check permissions to no avail, spoke to them again to day and the guy just said to re-install os x, don't really want to be doing that as I don't feel it will make any difference, have been reading on a few discussions and thought i would see if you could help, it seems tp happen when I am using skype or Ichat, I've been in contact with skype and they advised me to reinstall but there shouldn't have been a problem anyway and is not something that they have had reported, since re-installing there seems to be no problems but this was only this afternoon, I'm running os x with all the latest updates, and have no unusual third party software could someone please take a look at my panic log and see if they can help, thanks : )
Wed Feb 28 21:22:01 2007
panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xffc300e8, CR3: 0x00efa000, CR4: 0x000006e0
EAX: 0xffc300d0, EBX: 0x04c82c00, ECX: 0x0000000f, EDX: 0x03d909d0
CR2: 0xffc300e8, EBP: 0x25283cd8, ESI: 0x050c8640, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x003845a5, CS: 0x00000008, DS: 0x00040010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25283ac8 : 0x128d08 (0x3c9afc 0x25283aec 0x131de5 0x0)
0x25283b08 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x25283c18 : 0x19a904 (0x25283c30 0x1 0x25283c38 0x6)
0x25283cd8 : 0x3845f8 (0x50c8640 0x45a4400 0x0 0x50c8640)
0x25283cf8 : 0x3884dc (0x50c8640 0x50c8a80 0x0 0x4fc2550)
0x25283d38 : 0x38868f (0x50c8a80 0x4 0x0 0x4fc2550)
0x25283d58 : 0x3af4b1 (0x50c8a80 0x4ad980 0x2c 0x0)
0x25283d78 : 0x188cd8 (0x3828728 0x4fc2578 0x25283dac 0x11cc32)
0x25283db8 : 0x12b4c3 (0x4fc2550 0x4486ea4 0x0 0x0)
0x25283df8 : 0x124b17 (0x4fc2500 0x0 0x7c 0x25283edc)
0x25283f08 : 0x1955a8 (0x25283f44 0x0 0x0 0x0)
0x25283fc8 : 0x19ad7e (0x3e1bca0 0x1 0x19d0b5 0x41f1ca0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff548
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Wed Feb 28 21:35:44 2007
panic(cpu 1 caller 0x001914A8): pmapflushtlbs() timeout pmap=0x4b0700 cpustosignal=0x1
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2503ba58 : 0x128d08 (0x3c9afc 0x2503ba7c 0x131de5 0x0)
0x2503ba98 : 0x1914a8 (0x3cccfc 0x4b0700 0x1 0x190664)
0x2503bb08 : 0x1937db (0xfe9dc450 0xfe9dc458 0x0 0x19a3d6)
0x2503bb58 : 0x16535c (0x4b0700 0x3b88a000 0x0 0x3b88b000)
0x2503bc48 : 0x165b10 (0x3b88b000 0x0 0x1 0x0)
0x2503bc88 : 0x162e1f (0x1438f3c 0x3b88a000 0x0 0x3b88b000)
0x2503bcb8 : 0x3c24dc (0x1438f3c 0x3b88a000 0x1000 0x0)
0x2503bcd8 : 0x3bc8b4 (0x48ed780 0x0 0x1 0x3bf9c8)
0x2503bcf8 : 0x3bc983 (0x48ed780 0x0 0x23a3dba0 0x179)
0x2503bd18 : 0x3b254a (0x48ed780 0x3b88a000 0x0 0x179)
0x2503bd78 : 0x188e2c (0x3938400 0x3f68db8 0x415b8b4 0x415b8c8)
0x2503bdb8 : 0x12b4c3 (0x3f68d90 0x415b898 0x0 0x0)
0x2503bdf8 : 0x124b17 (0x3f68d00 0x0 0x3c 0x2503bedc)
0x2503bf08 : 0x1955a8 (0x2503bf44 0x0 0x0 0x0)
0x2503bfc8 : 0x19ad7e (0x4222920 0x1 0x10 0x4222920) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb021c838
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Thu Mar 1 09:21:46 2007
panic(cpu 0 caller 0x0037E9D5): transfer buffer poorly linked
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25293e38 : 0x128d08 (0x3c9afc 0x25293e5c 0x131de5 0x0)
0x25293e78 : 0x37e9d5 (0x5fcd88 0x25293ecc 0x25293eb8 0x38710f4)
0x25293e98 : 0x5bee98 (0x5fcd88 0x38710f4 0x25293eb8 0x19d23a)
0x25293ee8 : 0x5c03f5 (0x3b2f000 0x38710f4 0x25293f58 0x38710f4)
0x25293f08 : 0x398f79 (0x3b2f000 0x3d92000 0x1 0x2)
0x25293f58 : 0x39814b (0x3d92000 0x0 0x0 0x19d23a)
0x25293f88 : 0x397e81 (0x3d14340 0x399b100 0x12b40ee 0x1)
0x25293fc8 : 0x19a77c (0x3d14340 0x0 0x19d0b5 0x420dc80) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeonX1000(4.4.2)@0x5ba000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x580000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x590000
dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x5ab000
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Mon Mar 5 23:13:20 2007
panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x2a00290c, CR3: 0x00f09000, CR4: 0x000006e0
EAX: 0x03f3a12c, EBX: 0x00000000, ECX: 0xbffff000, EDX: 0x2a002900
CR2: 0x2a00290c, EBP: 0x25293838, ESI: 0x03f3a120, EDI: 0x00000000
EFL: 0x00010216, EIP: 0x001639a6, CS: 0x00000008, DS: 0x016f0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25293628 : 0x128d08 (0x3c9afc 0x2529364c 0x131de5 0x0)
0x25293668 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x25293778 : 0x19a904 (0x25293790 0x143df3c 0x16fee48 0x143df48)
0x25293838 : 0x169c48 (0x3f3a120 0xbffff000 0x0 0x2529390c)
0x25293928 : 0x3470b5 (0x3f3a120 0xbffff000 0x0 0x1000)
0x252939e8 : 0x347ebf (0x9f000 0x0 0x25293f3c 0x4eaebb8)
0x25293eb8 : 0x345906 (0x25293f0c 0x2 0x9f000 0x0)
0x25293f58 : 0x3787be (0x4eaebb8 0x481b658 0x481b69c 0x0)
0x25293fc8 : 0x19acde (0x4817840 0x0 0x19d0b5 0x4817840) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffffa58
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386 -
I'm getting the kernal panic screen when I put in DVD
My iMac G5, 2 GB has been slow, and occasionally getting the "restart your computer" screen. I ran the Apple Hardware Test on it twice. It passed both times, so I decided it must be software. I proceeded to do a clean install of the OS. Now I'm getting the Kernal Panic screen just as the computer recognizes the disk and is about to launch the installer. I've been reading the forums on Kernal Panic. Could be RAM memory. But could it also be the optical drive if its slow to spin at first?
What info on the "Panic" screen would tell me where the problem is?
Here's the message:
panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac12.1"
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x0002683C 00x0002DEC28 0x002BDFB4 0x002BDD7C 0x002BE7E4 0x002BEE50 0x000A9814
Proceeding back via exception chain:
Exception state (sv=0x00528280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernal Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.11 .obj-1/REAEASE_PPC
No debugger confirured - dumping debug information
MSR=00001030
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095D98 0x0002683C 0x002DEC28 0x002BDD7C 0x002BE7E4 0x002BEE50 )x000A9814
Proceeding back via exception chain:
Exception state (sv=0x00528280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj-1/REALSE_PPC
panic: We are hanging here...ylsteve wrote:
My iMac G5, 2 GB has been slow, and occasionally getting the "restart your computer" screen. I ran the Apple Hardware Test on it twice. It passed both times, so I decided it must be software. I proceeded to do a clean install of the OS. Now I'm getting the Kernal Panic screen just as the computer recognizes the disk and is about to launch the installer. I've been reading the forums on Kernal Panic. Could be RAM memory. But could it also be the optical drive if its slow to spin at first?
What info on the "Panic" screen would tell me where the problem is?
Here's the message:
panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac12.1"
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x0002683C 00x0002DEC28 0x002BDFB4 0x002BDD7C 0x002BE7E4 0x002BEE50 0x000A9814
Proceeding back via exception chain:
Exception state (sv=0x00528280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernal Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.11 .obj-1/REAEASE_PPC
No debugger confirured - dumping debug information
MSR=00001030
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095D98 0x0002683C 0x002DEC28 0x002BDD7C 0x002BE7E4 0x002BEE50 )x000A9814
Proceeding back via exception chain:
Exception state (sv=0x00528280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj-1/REALSE_PPC
panic: We are hanging here...
Your title is a little confusing; are you getting the message ONLY when you put a DVD in, or does it also happen when starting the computer up?
If it's the DVD, is it the OS DVD? Are you sure you are using a PPC DVD and not an Intel DVD? I recall the same panic screen on my own G5 1st gen when I mixed up my Intel DVD with my PPC DVD.
The first line of your panic (panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac12.1") was very similar to mine, except mine had "panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac8.2" -
USB2 PCI card = Yet Even Another Kernal Panic & Freeze
Its almost "a Tom & Gerry" situation - find the cause of one kernal panic shut down and yet another crops up the very next day without fail. I have had to remove the pci card and have reverted to the previous Wacom driver ! to continue working and stop losing any more studio - downtime !!!
So I wonder .... if its my Mac being so very fussy about PCI cards ?
I have now given up attempting to use a Wacom Tablet plugged into a Lacie NEC chipset PCI card (on a PPC Mac running on Tiger 10.4.11 !Hello Tom
It has been an interesting but frustrating experience to date .. esp. as the latest Wacom Tablet Driver V6.1.1-2(RC) ended up tripping out even without the pci card
I am now using only the Macs native USB2 ports:
Rear > (1) keyboard & mouse (2) UPS unit (not using powerchute).
Front > to plug in the Wacom Tablet when required (now running on the previous version Driver V6.1.0-7(RC)
This is the exact card http://www.lacie.com/products/product.htm?pid=11159
I am way out of my depth as to why
Perhaps your kind expertise may possibly shed some light on this one !
Kind Regards -
G5 OS 10.4.11 - kernal panic - won't start
Computer working fine then suddenly get a log-in screen saying User: Other?
restart - doesn't restart or get to login screen only apple on grey screen
Start - in safe mode
Panic - unable to find driver for the platfoem PowerMac 7.2 ....Darwin 8.11.0.. Root xnu 792,24 17 - release - ppc
panic - we are hanging here
Tried fscf -fd
hangs at catalogue file
disk 0.3 I/O error Invalid node structure
4,29135
Does not repair
Any thoughts? I have two partitions on the disk - one for the OS and one for my files
How can I access my disk? Can a firewire external link work using my powerbook to acces the PowerMac as a disk?Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
Mac OS X Kernel Panic FAQ
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics
Avoiding and eliminating Kernel panics
12-Step Program to Isolate Freezes and/or Kernel Panics
Cheers, Tom -
OAS 4.0.8.1 on NT ("PANIC" message when starting OAS)
[This is a reply to the message from HUNTERTJ entitled "OAS 4.0.8.1 on NT", because OTN won't accept a direct reply to the original message]
I had a similar "PANIC" error starting OAS on NT Workstation. I asked Oracle for help, and the fix they gave me was to set up a TCP/IP Loopback Adapter (under a different hardware profile) and use this profile when running OAS. I did this, and re-installed OAS just to be sure, and it now seems to work. No idea why.
Good luck!
nullHi !!!
I installed OAS 4.0.8.1 on Windows NT Server 4.0 with Service Pack 5 (June 1999).
I have a Oracle Database installed at the same machine (8.0.4 EE) because I installed OAS at other ORACLE_HOME. I follow the steps (workaround) showed at the document "Latest Oracle Application Server Release Notes. January 2000".
Hence, I created other user administrator for OAS and I put the entries for OAS at the User Path for this admin.
The system Path contains the entries for the database.
But, when I try to raise the process from OAS Manager, it happends the next:
Please wait while the command is being processed on host vnt05 ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host vnt05.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
Web Request Broker (Version: RM 4.0.8 Windows_NT 4 00 10/20/99 21:57:40):
Accepting requests.
oassrv: Starting wrb service 3
The WRB Authentication Host Server is now running.
oassrv: Starting wrb service 4
The WRB Authentication Engine is now running.
oassrv: Starting wrb service 5
Web Request Resource Manager Proxy is accepting requests.
oassrv: Starting wrb service 6
Initializing wrbmon ........................
OWS-08821: oassrv process 'oassrv' is started up at pid 119.
oassrv is accepting requests
OWS-08849: Waited 60 secs. Didn't receive initialization complete message.
OWS-08820: Unable to start wrksf process 'wrksf'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Any help will be appreciated.
Thanks. -
Ichat 3.1.8 freeze when starting videoconversation
I have used ichat videoconversation for over 8 months now and all of a sudden it stopped working. I haven't done a thing.
I can see and hear the other person and he can hear me but my pic freeze just when the chat starts.
I have a pc with aim 5.5 and with that one I can videochat with other persons. It's just my Imac that don't work.
I also have portforward the right port and tried port 443.
I also have a netgear wgr 614v6Hi Tomas,
Did I read in another thread that you have a Thomson-Alcatel SpeedTouch modem ?
Can you tell us which model and which firmware it is running ?
With some of their range it can get intermittent results.
Out of 50 Buddies you get about 10 you cna contact all the time, a similar number of now and then contact and about 30 who you can never contact.
If you Buddy list is much smaller you may not have noticed this.
Also things are subject to change when the OS is updated or Upgraded.
Can you also tell us which device is doing DHCP ?
11:11 PM Friday; November 9, 2007 -
Aperture 2.1 stuck or freezing when started
After the splash screen when I see the main screen, the beachball starts and doesn't stop. Except for the beachball the application freezes? I'm not sure what to do, I've rebooted,restarted I'm out of options. I'm in the middle of uploading a wedding so the timing is horrible. Also I don't use the vault. I hope someone has a solution for me.
Have the same problem. Aperture not starting, deleting preferences did not help, permissions are fixed, rebuilding library did not help, removing plugins did not help.
I have the following messages in the Console.app (the linked text is in boxed braces originally)
14.08.08 07:29:22 Aperture[7255] * NSRunLoop ignoring exception 'Exception in Aperture: Cannot remove an observer <ArchivePanelController 0x20615f10> for the key path "isMounted" from <RKArchiveVolume 0x20599600> because it is not registered as an observer.
No backtrace available.
' that raised during posting of delayed perform with target 0x13b4160 and selector '_delayedFinishLaunching'
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
14.08.08 07:29:22 Aperture[7255] Main Thread Exception in Aperture: * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
No backtrace available.
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
14.08.08 07:29:22 Aperture[7255] Main Thread Exception in Aperture: * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
No backtrace available.
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
Message was edited by: H.Mueller
Message was edited by: H.Mueller -
Firefox freezes when starting a download
When I start a download and choose the destination, Firefox freezes for about 2-3 seconds before starting to download. In that time, Firefox doesn't respond and acts like it crashed.
My computer is completely new, running Win8.1 64Bit from an SSD, Core i5 Quad, 8GB Ram and Avast Antivir. FF is configured to clear the cache everytime I exit.
It's almost the same as in https://support.mozilla.org/en-US/questions/937267 but in my case, every download makes FF freeze, not only the first.
I already tried deactivating the Web Protection of Avast and the integrated scanning feature of Firefox but this didn't solve the problem.Try using DownThemAll, a Firefox addon, it works perfect.
-
Libreoffice freezes when starting to TYPE ANYTHING. Cant reproduce.
I cannot do anything in libreoffice. When I first installed my default language showed up as afrikaan. I have fixed that by removing what I think was libreoffice-af. I have disabled jre and all extensions. I have tried reinstalling. (dont know how to purge packages though.) Basically I start math or writer, type a character and the whole program freezes and I get a popup saying libreoffice is unresponsive... click force quit. I have a feeling that if I completely purge libreoffice and reinstall *manually* (libreoffice-common libreoffice-writer libreoffice-math libreoffice-gnome) instead of installing by group it would solve the problem. I have searched the pacman wiki but can't find anything similar to apt-get remove --purge (came from aptosid).
Try moving the file ~/.conf/.libreoffice to something like ~/.conf/.xxxlibreoffice then restart libreoffice before re-installing it.
I, too, came from aptosid and find pacman much easier to work with than dpkg or apt. No need for purge in the debian sense. However, we need to deal with *.pacnew files now and then.
Neal -
[SOLVED] System freezes when starts using swap
When my system starts using swap, it completely freezes. Switching to tty doesn't work either.
There is already a topic on this problem, but the only advice it has is "use zswap" or "do not open 20 tabs at the same time", which is not really a solution imho.
I'm using a swap file in my home dir with swapon.
Last edited by TheChosenOne (2014-02-19 20:00:05)There is not much configuration going on.
What I do is this.
I'm kind of new to Arch Linux (used Ubuntu for a long time). How can I enable or see logs in Arch? -
Kernal panics, freezes and crashes
I have been carrying on a discussion on the Folding@Home forum here:
http://forum.folding-community.org/viewtopic.php?t=13790
but it is becoming more than a problem specifically with F@H it seems. (F@H is a medical research project run by Stanford University and it has excellent, though currently perplexed, help forums). The F@H forum discussion currently runs to 6 pages so far, but round about page 5 I start to post what logs I can find which might be relevant.
I have been Folding for a fair time now, without any incident, but a few weeks back, whenever I was due to return a unit the cursor and screen froze and I had to power off, leave the machine for several minutes, and then reboot. the completed unit was lost yet a new unit was downlkoaded and processed. this has happened to my last three units.
In addition, I moniter F@H via a front-end called InCrease which as a facility to stop processing. Whenever I stopped F@H, within 60 seconds, usually much less, the syetem kerneled. It does not do this when I stop any other process.
I have uninstalled several bits of software which had been added recently: Intego Virusbarrier X4, Intego Personal BackUp X4, Intego NetUpdateX4, Intego CommonServices X4, LittleSnitch and WeatherDock.
Since these have been unistalled, whenever I stop F@H processing, it doesn't kernel but crashes with white text on black lines superimposed over the desktop. I don't understand what it says, but two points of interest might be: invalid (pmap) and unaligned frame address 0x8E008821
Can anyone please tell me what is going on? I suspect that F@H is implicated (obviously) but that it is not guilty - if it were, then I would have experinced this problem before.
I have updated all software via Software Update so I should be fully up to date.
Any advice would be very very much appreciated. If you require any more detail, logs, information, etc. then just let me know and I'll do what I can - although I am a technophobe and don't really understand much about what goes on!
700MHz CRT G3 iMac slot-loading CD-R/W Mac OS X (10.4.3)Yesterday, I again repaired permsissions and verified the disk with Disk Utility with no errors reported other than "normal" permission type errors, mainly on widgets;
Then I:
Ran OnyX maintenance in full (every available option);
Ran OnyX Cleaning except the options for Cookies, Bookmark icons, Form values, Obsolete items of Mail folder and Mail downloads;
Ensured that I had installed all available updates via Software Update (there were none when I checked);
Safe booted and run fsck -fy several times with no errors reported on any pass;
Cursed and swore out loud.
And something has worked, but I really don't know what the problem was or what actually cured it although I suspect that OnyX did the trick, maybe in conjunction with one of the other utilities which I ran yesterday.
The last Folding unit uploaded correctly and I've been credited with it - currently I'm working a Tinker with an extimated 11 day turnaround.
Prior to that expected return I will reinstall everything which I uninstalled and try stopping the unit from time to time to see if the crashes have returned. Better a recoverable freeze mid-process than to lose it all at the end.
On a recommendation on another thread I shall be looking at Applejack later, as it is alleged to be more "powerful" than fsck -fy.
I'll only report back either to answer any subsequent posts or if it all goes wrong again.
Many thanks again.
700MHz CRT G3 iMac slot-loading CD-R/W Mac OS X (10.4.3) -
60+ Second Freezes when starting ASIO Applicati
Hi, I'm having a problem with my Audigy2 ZS - it seems that every time the ASIO driver initializes, my PC freezes COMPLETELY (even the mouse) for about 30-90 seconds. After that, it goes back to normal. I've got the newest drivers installed and the applications in question are Guitar Rig 2 and Cubase SX 3.
Any suggestions?
I'm running Windows XP Pro SP2 on an A64X2 3800+ with 2 gigs of RAM, if that hel
ps.
Thanks in advance!Yes I think that's it. The Play > Pause trick didn't work on my source device, but what does work, is if I have two or more seconds of silence at the start of a track, is to press the RECORD button in Audition the moment PatchMix's "LOCK" indicator lights up. (I just put Audition and Patchmix on the screen, side by side.)
Unfortunately some discs have only 1 second or so at the start of the first track, so that doesn't work then. Audition seems to need at least 1 to 2 seconds (at least in Edit mode) to initiate the recording after pressing the RECORD button. Would be nice to reduce that latency, if there are any tricks - maybe using Multitrack mode?
Maybe you are looking for
-
External Service Mangement Service Pricing Procedure not picking up in PO
Hi , We have an issue with External Services pricing procedure: In SPRO->MM->External services Management->Maintain Conditions for Service Have defined and assigned Schema for Services , but when I make a PO entry the pricing procedure is not picked.
-
Monitor stopped due to setup error or custom action
Hi folks, i have installed the sun cluster and created a resource group for my oracle database. I have created resourece's for database server and or listener. My question is when I am issuing the scstat command on my oracle server resource i get the
-
"Incorrect period" error while executing J1INQEFILE
Hi I am running J1INQEFILE. I gave company code as 1000. Fiscal year 2011. Period: 09 (as december is 9th month of FY 2011) Fiscal Period: 01.12.2011 to 31.12.2011 Clearing Date: 01.12.2011 to 31.12.2011 When i press enter, it gives error: Incorrect
-
Help request - Could need some help with a logo for my site
Hi I'm working on a project and i have come across a huge problem. please check out my logo on this site: http://www.tuxxen.com I have no idea how i should make my logo and it seems like i have no skills to make one either, i have been trying for d
-
Presentation shows too many questions in Question count - Progress Indicator
I just downloaded Captivate 7 and made a template for my presentation. I then imported some Powerpoint slides into the presentation after creating a project from the template. That all worked fine, but the template and the project list 11 questions