Kernal Panic Mac OS 10.5.8 when using Internet

I have a PowerPC G5 1.8GHz using OS 10.5.8. I get kernal panics when I'm online using the Internet. This is the only time I receive kernal panics. Can anyone lend some advice? The following is my latest panic report:
Mon Aug 20 07:56:31 2012
panic(cpu 1 caller 0x002C7B30): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.15.4/bsd/kern/uipc_mbuf.c:3574
Latest stack backtrace for cpu 1:
      Backtrace:
         0x0009CC88 0x0009D63C 0x00029DA0 0x002C7B30 0x00A833B4 0x00AB4CB0 0x00AB4F4C 0x00AB5234
         0x00AB69FC 0x00A8F814 0x0035D794 0x00A8F924 0x00A8FC80 0x00A9047C 0x00A88994 0x0012F0E0
         0x00161DA0 0x00168488 0x00169B84 0x00167D98 0x00159CC8 0x0015C0A4 0x0015C19C 0x001461F4
         0x0013208C 0x0012E50C 0x0012EBEC 0x0012EE88 0x000B1DD4
      Kernel loadable modules in backtrace (with dependencies):
         com.Ralink.driver.RT73(1.1.3)@0xa97000->0xacffff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x63c000
            dependency: com.apple.iokit.IONetworkingFamily(1.6.1)@0xa78000
            dependency: com.apple.iokit.IOUSBFamily(3.5.2)@0x4fd000
         com.apple.iokit.IONetworkingFamily(1.6.1)@0xa78000->0xa96fff
Proceeding back via exception chain:
   Exception state (sv=0x197d1c80)
      PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac7,2
System uptime in nanoseconds: 1346359341686
unloaded kexts:
com.apple.driver.Apple02DBDMAAudio    2.5.8f1 - last unloaded 4346203212
loaded kexts:
com.Ralink.driver.RT73    1.1.3
com.apple.filesystems.autofs    2.0.2 - last loaded 1056532382
com.apple.driver.AppleTopazAudio    2.5.8f1
com.apple.driver.AppleTAS3004Audio    2.5.8f1
com.apple.GeForcePPC    5.4.8
com.apple.driver.AudioIPCDriver    1.0.6
com.apple.driver.AppleFCU    1.3.2b0
com.apple.driver.AppleFan    1.0.10f1
com.apple.driver.AppleTexasAudio    2.5.8f1
com.apple.driver.AppleADT746x    1.0.10f1
com.apple.driver.AppleTexas2Audio    2.5.8f1
com.apple.driver.AppleADM103x    1.0.10f1
com.apple.driver.AppleDACAAudio    2.5.8f1
com.apple.driver.AppleHWSensor    1.9d0
com.apple.driver.AppleK2Fan    1.0.10f1
com.apple.driver.AppleSCCSerial    1.3.2
com.apple.nvidia.nv30hal    5.4.8
com.apple.driver.AppleCPUVoltage    1.5.2d0
com.apple.iokit.IOFireWireIP    1.7.7
com.apple.driver.AppleUSBDisplays    2.0.2
com.apple.driver.AppleVSP    2.2.2
com.apple.driver.AppleThermal    1.0.1f2
com.apple.driver.AppleK2Driver    1.7.2f1
com.apple.driver.AppleSlewClock    1.5.2d0
com.apple.driver.AppleHWClock    1.5.2d0
com.apple.driver.PowerMac7_2_PlatformPlugin    3.4.0d0
com.apple.driver.InternalModemSupport    2.4.0
com.apple.driver.AppleMaxim6690    1.9d0
com.apple.driver.AppleI2S    1.0.1f1
com.apple.driver.AppleAD741x    1.9d0
com.apple.driver.AppleLM7x    1.9d0
com.apple.driver.AppleFileSystemDriver    1.1.0
com.apple.driver.AppleUSBComposite    3.2.0
com.apple.driver.PioneerSuperDrive    2.0.9
com.apple.iokit.SCSITaskUserClient    2.1.1
com.apple.driver.XsanFilter    2.7.91
com.apple.iokit.IOATABlockStorage    2.0.6
com.apple.driver.AppleUSBHub    3.4.9
com.apple.iokit.IOATAPIProtocolTransport    1.5.3
com.apple.iokit.@

Thank you for your response.
I have external logitech speakers connected. Should I disconnect them to trouble shoot?
Unfortunately, this is my 2nd computer which is on a different floor than my modem and other computer, so I can't run an ethernet cable from here to there.

Similar Messages

  • Should i plug mac air in or not when using it?

    I m new user of mac air. I just wanna know whether i plug mac air in or not when using in.

    Apple does not recommend having it plugged in all the time:
    https://www.apple.com/au/batteries/notebooks.html

  • Does 2012 mac mini get very hot when using logic pro

    does 2012 mac mini get very hot when using logic pro

    Are you saying that your machine does or is it an enquiry before buying ? I use a 2011 server model - well, it does get hot over a period of time, but I've very rarely heard the fan kick in, its a surprise when it does. As far as I know the casing has been specifically designed to conduct heat, rather than having any fancy grilles and so on, being so small in size. I haven't found it to be cause for concern, if that's any help.
    Slidersson is in need of more cold showers.

  • I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this  on my Mac?

    I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this  on my Mac?

    About accessing using a browser: I can get in using Firefox or Safari, butI cant set the page up to see all my inboxes at the same time (so I can file emails appropriately) or get a preview to save opening every mail

  • How to remove Open/Save prompt when using Internet Explorer

    Acrobat XI Pro was deployed with custom MST that had When using Internet Explorer prompt for Open/Save.  Is there a hack that will disable this prompt without having to re-install Acrobat XI Pro?

    An engineer gave me a possible solution, but I don't have permission on my machine to test it. You can try the following:
    -- snip --
    This is because of not having necessary permissions to edit the registry. To obtain the permission, follow following steps:
    Right click on “HKEY_CLASSES_ROOT\AcroPDF.FDF.1” and click permissions.
    On permissions dialog, click Advanced.
    In the new dialog, select Owner tab and make current user as owner.
    Click Apply and close the dialog.
    Close the permission dialog.
    Try editing the registry as suggested.

  • When composing new email (gmail) tool bar showing fonts, colors, bold, italics, underline, etc. is missing? When using Internet Explorer the bar is there.

    When using Firefox, the tool bar above the "compose mail" window is missing. I cannot change fonts, use bold, italics, underline, change colors, align margins, etc. When using Internet Explorer the bar IS there but I prefer Firefox, as it is much faster. My operating system is Vista.

    Thanks Tony T1, I have tried using the Mail -> Format drop downs...
    ... and using the format toolbar...
    ... and in both cases, Bold and Italic is greyed out... (bit hard to see in the second screenshot, but it is, honest!)
    The mail message is def set as Rich Text, which you can see in the first screenshot, as the option to Make Plain Text is there...

  • Satellite Pro L350 - When using internet via Wi-Fi screen locks up

    Recentlyt bought Satellite Pro L350. When using internet via Wi-Fi screen locks up. I can't turn off.
    Had to remove battery to shut down. Re-loaded battery and restarted, OK for a while then same occurance.
    Help!

    This occurs while on plugged into wall. When I could not get shut down I unplugged from wall but was then on battery power. Using Vista as supplied by vendor Circuit City.

  • -5010F when using internet recovery option, -5010F when using internet recovery option

    I have tried to do clean instal of Lion OS but contantly hit an eror saying "Unable to Download components" then I tried using the internet -5010F when using internet recovery option but I am getting "apple.com/support -5010F error. I am a new bee to Apple and would appreciate any help provided.

    Please see Re: 5010F (3) error while attempting Internet Recovery

  • I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...

    I'm trying to read some XML data from temperature logger over my network.  I'm using LabView version 2009 sp1.  I'm using the URL Get Document Vi.  It works fine when using Internet sites like google or foxnews etc...
    When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document. 
    I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time.  When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time. 
    Is the URL Get Document Vi exceeding a timeout?  If so, where can I set it to wait longer?
    Attachments:
    Error 66.jpg ‏183 KB

    It looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well.  Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
    Attachments:
    ex1.PNG ‏33 KB

  • When using internet Facebook won't open first. it will open if I open open another site first like Amazon, then it will open fine.

    when using internet Facebook won't open first. it will open if I open open another site first like Amazon, then it will open fine.

    What version of iPhoto were you running prior to Mavericks?  First boot into Revovery volume (boot with the Command  + R keys held down) and repair the disk and disk permissions.  Then reboot back into Mavericks.
    Two hours later when the transfer was complete, rather than having a normol iPhoto Library icon (stack of pictures with a photo of a flower), the library appeared as a folder with a half done progress bar and an "x" close button in the corner.
    There was a problem with copying the older iPhoto library from the backup.  Delete the library and drag it once again from the backup drive to the Pictures folder.  Run the upgrader again. Is this what you see when your first launch the upgrader?
    OT

  • Orange mail software problem when using distribution lists : some lists cannot be used for writing e-mails. The problem does not exist when using Internet Explo

    When writing an e-mail directly on the Orange e-mail service (not on Thunderbird) I am facing the following problem : some distribution lists cannot be used to complete the adressees. The same lists can be used without difficulty if I use Internet Explorer instead of Firefox. The Orange hotline told me that probably my Firefox version was not updated. Unfortunately I checked that, and apparently the automatic updating works. I have also updated the plug ins, without any result.

    Please could you specify which webpage you mean ?
    The process with Orange is the following :
    - 1. click on "Write an e-mail" on the mail webpage
    - 2. click on "To" to reach the Contacts which opens a new window
    - 3. click on "Distribution lists"
    - 4. click on the selected list then click on "add". The list appears ot the box corresponding to the addresses .
    UNTIL THEN EVERYTHING WORKS WELL
    - 5. click on the button "validate", which closes the window previously opened and normally
    - 6. reloads the initial page with the complete list on the line "To". Instead of that I get the last e-mail address I previously used .
    Question : at which step of this process should I try your suggestions ? I tried when the initial page was reloaded with the wrong address, but it did not work to get back the rignt distribution list;
    Note that the whole process functions with OTHER Distribution lists. The only difference is that the problematic one has a larger number of adresses (62) however inferior to the maximum indicated by Orange (100).
    I also remind that there is no problem when using Internet Explorer instead of Firefox.
    Thanks for your help !

  • Nokia 603 can't receive call when using internet

    Why i cannot receive call when using internet on nokia 603
    Moderator's notes: The post was edited. A more appropriate subject is provided.

    Mon2 I love you fingernail breaking attempt of saying just NO.
    i ADVISE to check the above suggestions and come back with an answer
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Continuing Kernal Panic, Mac Store Clueless

    I brought my 1.25 Dual G4 (MMD) to the local Mac Store because it had started having repeating Kernal Panics. The machine would run for 1-2 hours and then Kernal Panic. At times, the machine would even Kernal Panic at start up. I even tried starting off the 10.3.9 disk and it Kernal Panic'ed. In short order, I had no access to my machine, or even any way to save my info off my drives.
    I am the guy that other people bring thier Mac to when it's broken. I have every program/tool needed to work on a mac. So if I couldn't find the issue, I surmized no one else could, and I may have been right.
    I brought my G4 to the Mac Store. They were able to repeat the Kernal Panic, and were unable to get my machine up, even trying to fire it up off of an external HD. The Mac store changed my CPU ( $600.00+ due to my applecare expiring). That didn't do it. I took it home and it did start up, so I backed up onto a Firewire drive - BUT, one hour after backing up - KERNAL PANIC!
    Mac Store Trip #2, they replaced my mother board (Logic board for mac users) and my processor again (free). 1 hour later KERNAL PANIC!!
    Mac Store Trip #3 - they claim the figured out that a 3rd party HD I installed was causing the Kernal Panic. I took out the hardrive, bought a brand new one, reinstalled everything, 1 hour after I finished installing 10.4.7 BOOM KERNAL PANIC!
    The apple store was clueless the whole time, and did about $2000.00 worth of repairs and labor for about 6 days costing me $600.00 and gas money. I really don't care, as long as my box works.
    I have found that my fan doesn't seem to "speed up" anymore as it once did, and the inside of the box seems unusally hot. I just intalled 2 extra fans, and 2 hours later KERNAL PANIC.
    I know the issue is not the HD. I know the issue isn't the video/3D card (I have 2 cards, and swaping them, both occur).
    I have a 2096 SCSI card from adaptec with the driver installed that I have used for 3 years...dunno if it can be that.
    I have a Aurora Fuse Igniter video card, with currently no driver installed. I'm gonna take that out, but that has been in the machine for 3 years as well, with no issues.
    I can guess that MAYBE one of my ram chips has gone bad. I will try taking out all but the original ram and running the machine.
    Any other ideas? Anytime the processor has to work hard for about an hour, the machine Kernal Panics. I have to admit, at least now it starts up - whereas before it wasn't even doing that - so the Mac Store did do something. Now the symtoms have just changed.
    I am considering installing a 3rd fan that is attached to the HD case and pointed on a slight angle into the giant heat sink of the processor. The heat sink is right next to the HD, and seems to get unusally hot.
    I have Geforc4MX card currently installed, and I own a 9800Radion Pro.
    This box was my workhorse. I have owned about 9 macs, and I have never had real issues like this. Ususally my HD's would just die. I cannot figure out what the heck is wrong with it, despite 10 years of fixing my macs, friends macs, and family's macs.
    The Kernal panic messages weren't even being saved, thats how bad the panic was. The few times I saw it, it said "CPU 01" but since the CPU has been changed twice now, I assume its not that.
    Any suggestions would be helpful.

    This may or may not help. I have experienced kernel panics periodically, daily, since I bought my 1.42 dual. I usually know how to fix things, but i am not certified. I understand heat, so I run a large fan- a real ordinary box fan- right next to my computer blowing past it. This does not strain the internal power supply further. i have the box maxed, two optical drives, 128 radeon 9800 card, 4 drives, no pci fans internally, unless you count the onboard video card fan. I don't leave my firewire drives attached- just on and off for transfers- and I was determined this week to get the problem (of 2 years plus, now), solved. I have been kernel panic free for slightly over a day, so I don't know if this is appropriate yet, but it seems that my original 1 GB of ram from the apple build was the problem. I did notice that those sticks were much hotter than my additional ramjet sticks this last week when I went to unseat and reseat them, so I just took them out as a test. I think formerly I just removed my additional ram as a test. I am looking around at the sticks to try and figure out if one duo was ecc and one was not.... but as I understand it, all that would do would be to remove the ecc function on the duo that was ecc... I do not remember buying non-ecc ram. If my machine continues to be stable, I intend to just buy a little more ram identical to the sticks that are working now. I've lost work and had continual challenges because of this problem, and it does not seem to be because of the ram I added, at all, but the ram from apple that I started off with. I have had this problem since the day i turned on the machine, I have read about so many other people suffering with it, and heat and firewire disks and power supply were the culprits always suggested to me. Does anyone have a site to suggest that helps one identify ram sticks with an image? Has anyone ever seen information from Apple that admits to this problem in these machines? They weren't continued that long with the move to the G5.

  • Kernal panic - mac mini, external firewire hard drive

    hi, i've got a lacie fw400 hard drive, that i've had for about 3 years...works fine on an old intel mac mini, but when i connect it to a new mac mini with a fw800 port via a fw800/fw400 cable, it causes a kernal panic on waking from sleep.
    is anyone else seeing this behavior? any idea how to fix?

    OK, dismount and disconnect the LaCie drive.
    Check that the directory of your boot drive is healthy*:
    http://www.macmaps.com/directoryfaq.html
    - * Links to my pages may give me compensation.

  • TS3742 How do I resolve OS 10.8 kernal panics / crashes that occur most frequenly when waking up from sleep mode?

    I get a lot of gray screens of death on my MacBook Pro ever since I went to OS 10.8.  Never had issues with the 10.6 versions and now miss those days.  The kernal panics seem to occur most frequently just waking it up from sleep, regardless of where i am or what is attached to it.  I can't help but wonder if it is a problem with the video drivers under 10.8.x.
    I get these daily, so here is the log that gets sent to Apple, but I'm not really sure anyone looks at them.  Perhaps they would if other people experienced the problem too, but perhaps I'm in the vast minority.
    Interval Since Last Panic Report:  39424 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    350418C9-219F-2234-511F-6093210CA72E
    Wed Jul  3 12:57:44 2013
    panic(cpu 3 caller 0xffffff7fa122ef1a): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff81101ad000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 3), Frame : Return Address
    0xffffff810fdc2ef0 : 0xffffff801f01d626
    0xffffff810fdc2f60 : 0xffffff7fa122ef1a
    0xffffff810fdc3030 : 0xffffff7f9f79cf1e
    0xffffff810fdc30f0 : 0xffffff7f9f87112d
    0xffffff810fdc3130 : 0xffffff7f9f87118e
    0xffffff810fdc31a0 : 0xffffff7f9fb37ed0
    0xffffff810fdc32d0 : 0xffffff7f9f899a75
    0xffffff810fdc32f0 : 0xffffff7f9f7a3d50
    0xffffff810fdc33a0 : 0xffffff7f9f7a17d0
    0xffffff810fdc35a0 : 0xffffff7f9f7a310a
    0xffffff810fdc3670 : 0xffffff7fa077e8be
    0xffffff810fdc3730 : 0xffffff7fa07a9fa8
    0xffffff810fdc37b0 : 0xffffff7fa07913e0
    0xffffff810fdc3810 : 0xffffff7fa0791cc1
    0xffffff810fdc3860 : 0xffffff7fa0792173
    0xffffff810fdc38d0 : 0xffffff7fa07929d3
    0xffffff810fdc3910 : 0xffffff7fa075de2f
    0xffffff810fdc3a90 : 0xffffff7fa078ef0f
    0xffffff810fdc3b50 : 0xffffff7fa075c8c8
    0xffffff810fdc3ba0 : 0xffffff801f466e69
    0xffffff810fdc3bc0 : 0xffffff801f468410
    0xffffff810fdc3c20 : 0xffffff801f465e2f
    0xffffff810fdc3d70 : 0xffffff801f098c01
    0xffffff810fdc3e80 : 0xffffff801f020b3d
    0xffffff810fdc3eb0 : 0xffffff801f010448
    0xffffff810fdc3f00 : 0xffffff801f01961b
    0xffffff810fdc3f70 : 0xffffff801f0a6536
    0xffffff810fdc3fb0 : 0xffffff801f0ce9e3
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7fa1221000->0xffffff7fa1233fff
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7fa121c000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
                dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7fa1208000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f9f5e8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f9f727000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9f6e4000
             com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f9f7 3b000->0xffffff7f9f9e0fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f9f727000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9f6e4000
             com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f9f9ec000->0xffffff7f9fcc0fff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f9f7 3b000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
             com.apple.GeForce(8.1.2)[7EC545A4-4B57-32F1-8DC3-C31023AFBDCB]@0xffffff7fa074a0 00->0xffffff7fa0817fff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f9f7 3b000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f9f727000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9f6e4000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x000000001ee00000
    Kernel text base: 0xffffff801f000000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 39531702676383
    last loaded kext at 25781655065123: com.apple.driver.AppleUSBCDC    4.1.23 (addr 0xffffff7fa13f3000, size 16384)
    last unloaded kext at 25851680759110: com.apple.driver.StorageLynx    3.1.7 (addr 0xffffff7fa13e7000, size 8192)
    loaded kext
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2504, 0xfd130000 / 5
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd133000 / 6
    USB Device: Microsoft 5-Button Mouse with IntelliEye(TM), 0x045e  (Microsoft Corporation), 0x0039, 0xfd133300 / 8
    USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd133200 / 7
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
    FireWire Device: OEM ATA Device 00, G-TECH, 800mbit_speed

    Do you see things like described here: http://support.apple.com/kb/TS4088
    If so, or even if they don't, you should take your MBP into an Apple Store or Apple Certified Service center along with a printout of that article. They will test it to see if it is that problem and replace the logic board for free up to three years from date of purchase. That time is likely close or already passed.

Maybe you are looking for

  • Deleting a Record in Database - Error Message

    Hello. I have made a database, where i can view, edit, add new records and its all working fine. I am trying to also have a delete feature on it. I have created the link for it to delete, and added the commands but im getting an error message when i

  • Is it possible to call web service from ABAP SAP 4.6 c..If yes how

    Hi Friends, Is it possible to call web service from ABAP-SAP 4.6 c..If yes Could you please let me know how. Thanks in Advance. Murali Krishna K Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:09 PM Edited by: Murali Krishna Kakarla on Jan 26, 20

  • Error message "wrong machine" on Qosmio G35-AV650

    Hi please help me with the "wrong machine" message in my notebook .... how can I update DMI ? Thank you !

  • BUG : url with an anchor don't open the in-app browser

    When you make to button to open a local url, it doesn't work if the url has an anchor tag. Exemple : HTMLResources/test.html -> open the file test.html with the in-app browser HTMLResources/test.html#test -> don't open the in-app browser It is a vali

  • Hard crashes AND app crashes (with Console logs)

    This topic is several months, if not a couple of years, in the making. I bought two white MBs in July of 07 from the refurbished section of the Apple Store. My wife's needed a trip to the Apple Care depot not long ago, and I'm starting to think mine