Kernel 2.6.33.4-1 r8169 driver issue

I am having a issue with my network chip on my mainboard.  It runs a r8169 chip.  When I upgraded the kernel the network randomly stopped working entirely.  So I decided to do a reinstall of Arch.  Everything reinstalls fine then once I boot bam no network again.  I tried messing with dhcpcd and ifconfig per the wiki however, the card can't even access the router.  When I look at my router the link light for that cable just blinks on and off.  So I grabbed a fedora12 disc and installed that so I can have network access back.  Anyone else have this issue?  Should I wait to reinstall after the next kernel update?  Or is there some kind of workaround I can do?  I did try the realtek drivers from their site but they won't build at all.

After bootup, is your ethernet card listed by ifconfig? 
I'm also having problem with a card handled by r8169, but for me the problem is, I think,  a slow-responding dhcp server (something the network daemon doesn't like much it seems), if I configure the interface statically it's ok

Similar Messages

  • I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd li

    I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.

    You can download Creative Suite 5 here:
    Other downloads
    To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
    Adobe ID, sign in, and account help
    See the bottom of the page for a link

  • CentOS based linux VM running on Hyper-v : Checking root filesystem fails when kernel switches having old PV(para virtualised driver based on 2.6.32 linux kernel) to new PV(which is equivalent to linux integration component 3.4)

    hi all,
    I am running a CentOS base VM on top of Hyper-V server. I upgraded PV drivers of Hyper-V in linux kernel 2.6.32 in order to support
    Windows Server 2012, then i am hitting below issue on Windows Server 2008 when kernel switches from old PV(which is 2.6.32 based) to new PV(which is equivalent to linux integration component 3.4).i
    am hitting following filesystem check error messages :
    Setting hostname hostname:
    Checking root filesystem
    fsck.ext3/dev/hda2:
    The superblock could not be read or does not describe correct ext2 filesystem. If the device is valid and it really contains an ext2
    filesystem(and not swap or ufs or something else),then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
    : No such file or directory while trying to open /dev/hda2
    *** An error occurred during the filesystem check.
    *** Dropping you to a shell; the system will reboot
    *** When you leave the shell.
    Also, when I go to the repair filesystem mode. I found out the strange behaviour when i ran those command :
    (Repair filesytem) 1 # mount
    /dev/hda2 on / type ext3 (rw)
    proc on /proc type proc (rw)
    (Repair filesystem) 1# cat /etc/mtab
    /dev/hda2 /ext3 rw 0 0
    proc /proc proc rw 0 0
    (Repair filesystem) 1# df
    Filesystem 1K-blocks used Available Use% Mountedon
    /dev/hda2 4%
    I think for all above command there should be /dev/sda2 instead of /dev/hda2.
    Also my fstab , and fdisk -l looks like ok for me.
    (Repair filesystem) 1# cat /etc/fstab
    LABEL=/ / ext3 defaults 1 1
    LABEL=/boot /boot ext3 defaults 1 2
    devpts /dev/pts devpts gid=5,mode=620 0 0
    tmpfs /dev/shm tmpfs defaults 0 0
    proc /proc proc defaults 0 0
    sysfs /sys sysfs defaults 0 0
    LABEL=swap-xvda3 swap swap defults 0 0
    (Repair filesystem) 1# fdisk -l
    Device Boot Start End Block Id System
    /dev/sda1 * 1 49 98535 83 Linux
    Partition 1 does not end with cylinder boundary.
    /dev/sda2 49 19197 39062500 83 Linux
    Partition 2 does not end with cylinder boundary.
    /dev/sda3 ......
    Partition 3 does not ......
    /dev/sda4 ......
    Partition 4 does not end ....
    (Repair filesystem) 1# e2label /dev/sda1
    /boot
    (Repair filesystem) 1# e2label /dev/sda2
    (Repair fielsystem) 1# ls /dev/sd*
    /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4
    (Repair filesyatem) 1# ls /dev/hd*
    ls: /dev/hd*: No such file or directory
    Kindly suggest any configuration of windows server or kernel configs missing or how to resolve this issues
    Many many thanks for your reply.
    thanks & Regards,
    Ujjwal

    i am not able to understand duplicate UUID and from where it is picking /dev/hda* ?
    ~
    VVM:>>
    VVM:>> Output of dmesg | grep ata contain substring "Hyper-V" ?
    VVM:>>
    it doesn't contain "Hyper-V" or ata related message and the output doesn't change with boot parameter reserve=0x1f0, 0x8
    ~~
    ~~~~
    ==
     output of dmesg related "ata" Ubuntu v13.04 mini.iso ( with boot parameter reserve=0x1f0, 0x8)
    ==
     see later ( in "good situation" example  )
    ~~
    ===
    Disable legacy ATA driver by adding the following to kernel command line in /boot/grub/menu.lst:
    reserve=0x1f0, 0x8
    . (This option reserves this I/O region and prevents ata_piix from loading).
    ==
     See output of dmesg related "ata" Ubuntu v13.04 mini.iso ( with boot parameter reserve=0x1f0, 0x8) :
    ~~
    [ 0.176027] 
    libata version 3.00 loaded.
    [ 0.713319] 
    ata_piix 0000:00:07.1: version 2.13
    [ 0.713397] 
    ata_piix 0000:00:07.1: device not available (can't reserve [io 0x0000-0x0007])
    [ 0.713404] 
    ata_piix: probe of 0000:00:07.1 failed with error -22
    [ 0.713474] 
    pata_acpi 0000:00:07.1: device not available (can't reserve [io 0x0000-0x0007])
    [ 0.713479] 
    pata_acpi: probe of 0000:00:07.1 failed with error -22
    ~~
      As result: 1) IDE disk handled by hv_storvsc , but 2) no CD-ROM device
    ==
    ~ # blkid
    /dev/sda1: LABEL="ARCH_BOOT" UUID="009c2043-4bl7-4f95-al4d-fb8951f95b5d" TYPE="ext2"
    ==
    ~~
    VVM>>
    VVM>>Q1: Output of blkid contain duplicate UUID ?
    VVM>>
    -> blkid contains duplicate UUID, below are the output.
    ~~
     This situation is classic problem "
    use hv_storvsc instead of ata_piix to handle the IDE disks devices ( but not for the DVD-ROM / CD-ROM device handling)
    ~~
     For compare, see example "good situation": 
     See output of dmesg related "ata" Ubuntu v13.04 mini.iso ( without boot parameter reserve=0x1f0, 0x8) :
    ~~~~
    ~ # dmesg |grep ata
    [ 0.167224] libata version 3.00 loaded.
    [ 0.703109] ata_piix 0000:00:07.1: version 2.13
    [ 0.703267] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
    [ 0.703339] ata_piix 0000:00:07.1: setting latency timer to 64
    [ 0.704968] scsi0 : ata_piix
    [ 0.705713] scsi1 : ata_piix
    [ 0.706191] atal: PATA max UDMA/33 cmd 0xlf0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [ 0.706194] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [ 0.868844] atal.00: host indicates ignore ATA devices, ignored
    [ 0.869142] ata2.00: ATAPI: Virtual CD, , max MWDMA2
    [ 0.871736] ata2.00: configured for MWDMA2
    ~~~~
    ===
    ~ # uname -a
    Linux ubuntu 3.7.0-7-generic #15-Ubuntu SUP Sat Dec 15 14:13:08 UTC 2012 x86_64 GNU/Linux
    ~ # lsmod
    hv_netvsc 22769 0
    hv_storvsc 17496 3
    hv_utils 13569 0
    hv_vmbus 34432 3 hv_netvsc,hv_storvsc,hv_utils
    ~ # blkid
    /dev/sr0: LABEL=”CDROM" TYPE="iso9660”
    /dev/sda1: LABEL="ARCH_BOOT" UUID="009c2043-4bl7-4f95-al4d-fb8951f95b5d" TYPE="ext2"
    ===
     ( only CD-ROM and 1( one) IDE disk connected to ATA)
    ~~
    regarding ata_piix.c patch . . .
    As far as i understand this patch , it ignore ATA devices on Hyper-V when PV drivers(CONFIG_HYPERV_STORAGE=y) are enabled.
    ~~
     Yes:
    ignore ATA-HDD ( but not ignore ATA CD-ROM )  on Hyper-V when PV drivers(CONFIG_HYPERV_STORAGE=y) are enabled.
    ~
     this patches need be backported:
      cd006086fa5d ata_piix: defer disks to the Hyper-V drivers by default
    and its prerequisite
      db63a4c8115a libata: add a host flag to ignore detected ATA devices
    ~
    ~~
    P.S.
     Are You do this:
    ==
    As temporary solution, increase on 1-2 Gb size all .vhd connected to IDE bus
    ( but not increase size of partitions inside disks)
    ==
    ? fsck write message a-la: "no error in file system" ?
    2013-01-24 Answer by Ujjwal Kumar: As a temporary solution looks ok for me, but [ VVM: need true solution ]
    P.P.S.
    To Ujjwal Kumar :
     My e-mail:
    ZZZZZZZZZZZZZZZ
    please send e-mail to me,  in reply I send to You patches to ata_piix ( and *.c before and after patches) , etc.
    } on 2013-01-14 -- DoNe

  • Can't get b43 or r8169 driver working in installation

    Hello Arch Linux Form users! This is my first post.
    I have been using Arch for a few months now on my netbook but now I am trying to install it on my larger laptop.
    The problem I am having is I cannot get the b43 driver working during the installation to get wifi.
    I also cannot get the r8169 driver working for LAN.
    Any help would be appreciated!

    I have an RTL8111/8168 and when I got the machine a couple years back, the r8169 module was just awful with it.  I discovered the r8168 module in the official repos and that worked beautifully.  So you may want to give that a whirl.
    Since then I had to have the board replaced during a warranty repair.  So after that I ended up with a seemingly different piece of hardware, as the r8169 module works just fine with it.
    As for your wireless card, Broadcoms are kind of funky.  There are three modules which support broadcom cards, none of which support them all.  It is good to know about this page when deciding which to use.  In your case, the b43 module should work, but that table indicates it is only partially supported (whatever that may mean).  But you will need the b43-firmware as the wiki page ewaller linked to indicates.

  • Windows 8.1 BSoD & driver issue

    Hello,
    I was hoping someone could help me out here. Let me describe the issue. For quite a while I was using Windows 8.1 fine and did not have any problems, however I recently burned my PSU somehow and then the problems started. Which I somewhy find odd, cause the
    BSoD's are related to a driver issue(?). The driver which seems to cause the problem, is
    Intel(R) Engine Management Interface.
    "This device cannot start. (Code 10)
    A device which does not exist was specified"
    Event Viewer displays the following error:
    "Intel(R) Engine Management Interface driver has failed to perform a handshake with the Firmware."
    Since it says "A device which does not exist was specified.", I assume I don't need this driver at all, so I tried disabling it and uninstalling, but it keeps coming back every time I restart my PC. I even tried looking for a newer driver, but couldn't
    find anything. The newest driver is for Windows 7 x64/x86. I found out you could possibly disable it in bios, but I couldn't find the option to do so in my bios. I went thru every option 1 by 1, just to make sure, I wouldn't miss it.
    Here's my PC:
    Motherboard: Gigabyte GA-H55M-S2 (F4 BIOS)
    CPU: Intel i3 540 @ 3.07GHz (Overclocked to 4,03GHz)
    Cooler: Cooler Master Hyper 212 EVO
    GPU: NVIDIA GeForce GTX 660 (GV-N660OC-2GD)
    RAM: 2 x Kingston 4GB 1333MHz DDR3
    HDD: Western Digital 500GB
    At the very moment, I have installed a fresh copy of Windows 8.1 Professional x64 and the problem still seems to exist. I have tried and googled for everything I can think off, now I'm just stuck at this problem.
    I hope someone can help me out here, or at the very least, guide me in the right direction.
    Link to minidump: http://1drv.ms/1H6E4uh

    Use !analyze -v to get detailed debugging information.
    BugCheck D1, {fffff8012d4359f0, 2, 8, fffff8012d4359f0}
    Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+23a )
    Followup: MachineOwner
    2: kd> !analyze -v
    * Bugcheck Analysis *
    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high. This is usually
    caused by drivers using improper addresses.
    If kernel debugger is available get stack backtrace.
    Arguments:
    Arg1: fffff8012d4359f0, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
    Arg4: fffff8012d4359f0, address which referenced memory
    Debugging Details:
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80108f64138
    unable to get nt!MmNonPagedPoolStart
    unable to get nt!MmSizeOfNonPagedPoolInBytes
    fffff8012d4359f0
    CURRENT_IRQL: 2
    FAULTING_IP:
    +8c228a89b114
    fffff801`2d4359f0 ?? ???
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
    BUGCHECK_STR: AV
    PROCESS_NAME: svchost.exe
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    TRAP_FRAME: ffffd00027a58120 -- (.trap 0xffffd00027a58120)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0a00000000000020 rbx=0000000000000000 rcx=0000000000000002
    rdx=fffff8012d4359f0 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8012d4359f0 rsp=ffffd00027a582b0 rbp=0001da10001da171
    r8=00000000001da130 r9=02200000001da347 r10=7100a1ef05420000
    r11=0000000000000042 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei ng nz na po nc
    fffff801`2d4359f0 ?? ???
    Resetting default scope
    LAST_CONTROL_TRANSFER: from fffff80108d5d4e9 to fffff80108d519a0
    FAILED_INSTRUCTION_ADDRESS:
    +8c228a89b114
    fffff801`2d4359f0 ?? ???
    STACK_TEXT:
    ffffd000`27a57fd8 fffff801`08d5d4e9 : 00000000`0000000a fffff801`2d4359f0 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
    ffffd000`27a57fe0 fffff801`08d5bd3a : 00000000`00000008 ffffe000`8f89b0f8 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
    ffffd000`27a58120 fffff801`2d4359f0 : 00000000`00000000 00000000`00000000 00000000`000e293f 00000000`00000000 : nt!KiPageFault+0x23a
    ffffd000`27a582b0 00000000`00000000 : 00000000`00000000 00000000`000e293f 00000000`00000000 00000000`0001358b : 0xfffff801`2d4359f0
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    nt!KiPageFault+23a
    fffff801`08d5bd3a 440f20c0 mov rax,cr8
    SYMBOL_STACK_INDEX: 2
    SYMBOL_NAME: nt!KiPageFault+23a
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME: ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP: 54c832b2
    IMAGE_VERSION: 6.3.9600.17668
    BUCKET_ID_FUNC_OFFSET: 23a
    FAILURE_BUCKET_ID: AV_CODE_AV_BAD_IP_nt!KiPageFault
    BUCKET_ID: AV_CODE_AV_BAD_IP_nt!KiPageFault
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:av_code_av_bad_ip_nt!kipagefault
    FAILURE_ID_HASH: {73cd60cc-83fa-6b76-df08-1961c31d7403}
    Followup: MachineOwner
    It points to incorrect memory page access obviously. It generally caused by some driver like you found. update all drivers should be resolved. Have you tried ever?

  • Ogre 3D 'glGetString' Problem, May Be Driver Issue

    Hello!
    I'm relatively new to Arch Linux, all I did till now was install it and get X running with the 'awesome' window manager. I must say, I like it, especially pacman, AUR and ABS.
    I'm a hobbyist programmer and I generally write graphics applications (games) with Ogre 3D. I decided to get Ogre 3D and build it. I got the latest SVN HEAD, and built it, it built fine. However, when I run a sample, I get the following error (which occurs right when it tries to create the GLX subsystem):-
    OgreGLSupport.cpp:57: virtual void Ogre::GLSupport::initialiseExtensions: Assertion `pcVer && "Problems getting GL version string using glGetString"' failed
    I've run Ogre 3D applications both on Windows and Ubuntu on this very same laptop, so I don't think its a hardware issue. It may be a driver issue though. I have 'xf86-video-intel' installed, and hotplugging turned off with "AutoAddDevices" "False" in xorg.conf. 'lspci | grep VGA' gives:-
    Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
    It is possible that it's an Ogre specific issue, but I still thought I'd mention it here because it could also have to do with drivers and other configuration stuff.
    To check whether glGetString() works, I took the program from the second NeHe tutorial and modified it to spit out glGetString results, and it says "Vendor: Mesa Project, Renderer: Software Rasterizer, Version: 2.1 Mesa 7.2".
    I've also run some other graphics applications (the Bullet physics engine (which I just built today) demos), and they run much slower than how they did on Windows and Ubuntu.
    Any ideas what the problem is and how to fix it?
    Thanks for your help!
    Last edited by nikki (2009-01-06 12:41:27)

    Humnn... I don't know. How I "solved" it today: downgrade xorg-server to 1.5.3, catalyst to 9.4 and kernel to 2.6.28. Now I have my game working again. I think it was only a problem with the driver... I'll try to upgrade asap.

  • Macally Icekey driver issues

    The Macally Icekey driver has a serious problem.
    It was evidently built with some debugging code, because it floods the console log with multiple lines of debug messages for every keystroke.
    This not only makes it hard to find things in the console log, it makes it very difficult to use the console because of the messages. For example, booting to single user mode you cannot see the command line because of the spew.
    The messages look like this:
    5/1/09 03:47:43 kernel test handlereport
    5/1/09 03:47:43 kernel the 0 position is 0, len = 8
    5/1/09 03:47:43 kernel the 1 position is 0, len = 8
    5/1/09 03:47:43 kernel the 2 position is 0, len = 8
    5/1/09 03:47:43 kernel the 3 position is 0, len = 8
    5/1/09 03:47:43 kernel the 4 position is 0, len = 8
    5/1/09 03:47:43 kernel the 5 position is 0, len = 8
    5/1/09 03:47:43 kernel the 6 position is 0, len = 8
    5/1/09 03:47:43 kernel the 7 position is 0, len = 8
    That's what a single keystroke generates in the console log.
    It also makes the machine sluggish at times, or can cause missed keystrokes.
    Macally seems to have no interest in fixing this and from what I have read tells users who email them "Sorry, we have no plans to fix this."
    However, some users in a thread last year reported that the older Icekey drivers did not have this problem and worked much better.
    Does anyone know how to get one of those old drivers or where they might be stored?
    Again, Macally is no help, and this is a pretty serious issue. I paid $50 for this keyboard and I like it, but if I can solve this problem I'll end up having to toss it.
    Thanks.
    Message was edited by: cshapple

    I really don't like laptop keyboards as much as full travel mechanical anyway, and rubber-dome keyboards hurt my hands except for the very best of them.
    I did try the new Apple keyboards, and I think they are far too light and small, and the key shapes and layout is pretty terrible. I realize a lot of people like them, but I don't like them.
    Also, when I played with the new Apple keyboards, they did require drivers and the drivers were buggy, so I'm not sure what you mean about no driver issues.
    I have heard that the Logitech Dinovo series has a little more key travel, but is otherwise a mechanical scissor setup, so I might try one of those eventually.
    It's pretty silly for a keyboard to need a driver in 2009. All of the keys can be added to a standard decoded matrix without a driver.
    I would like to see Apple make their aluminum keyboards heavier, larger, and with a more standard key shape and layout, and add another 1-2mm of key travel. That would sell me and a lot of other people.
    Oh and please, no drivers...

  • Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

    Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy.  It is a Macbook Pro  osx 10.6.8 (late 2010).

    Almost certainly none of the above!  Try each of the following in this order:
    Select 'Reset Safari' from the Safari menu.
    Close down Safari;  move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
    Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
    Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
              defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

  • Very slow wine game/nouveau driver issue

    Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
    I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
    Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
    err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
    libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
    libGL error: unable to load driver: nouveau_dri.so
    libGL error: driver pointer missing
    libGL error: failed to load driver: nouveau
    libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
    libGL error: unable to load driver: i965_dri.so
    libGL error: driver pointer missing
    libGL error: failed to load driver: i965
    [VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
    terminate called without an active exception
    Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
    Some info:
    Graphic cards:
    01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    Packages:
    local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
    local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
    Open Source 2D acceleration driver for nVidia cards
    local/nouveau-dri 10.2.8-1
    Mesa drivers for Nouveau
    local/bumblebee 3.2.1-3
    NVIDIA Optimus support for Linux through VirtualGL
    Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

    Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

  • Hard drive issues after update 10.10.3

    Question also posted here:Hard Drive Issues (Both new and old)
    I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
    I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
    So, I decided that it was a HDD failure and bought a new one.
    I bought the Seagate 1TB SSHD Hybrid  - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
    Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
    Any ideas on *** is going on?
    Thanks in advance!
    MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

    After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
    One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
    Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
    I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

  • Can you use a Mac Mini to share documents between several devices? iPhones, MacBooks, iPads, etc...? We are a home based business with several locations across the state and are having Google Drive issues, looking into Mac Mini options.

    We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?

    If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac  and at least iOS 5 on the mobile devices.
    I show those document on my Mac, iPad 4 and iPhone 4S

  • Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

    Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
    I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
    PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
    ATTEMPTED WORKAROUNDS:
    *Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
    *Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
    *The 5 R's as recommended by Apple Support... tried and failed.
    *I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
    *Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
    * Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
    *From Windows Software config utility: Ran repair to re-install itunes 8... same results.
    *From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
    Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
    Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
    Apple iPod USB Device properties:
    Driver Provider - Microsoft
    Driver Date - 7/1/2001
    Driver Version - 5.1.2535.0
    Digital Signer - Microsoft Windows Publisher

    Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

  • Pixma ip6000d windows 7 driver issue. How do you get one?

    Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.

    Hello ricksterofmi,
    The PIXMA iP6000D Drivers are included with the Windows 7 Operating System through Windows Update.  Please connect the PIXMA iP6000D to your computer and automatically install the drivers.  Once this has been done, visit our website by selecting this LINK to download and install the Add On Module for full compatibility.
    I hope this helps.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP 6600 Scan\Print Driver Issue for Windows 7 Profession​al 64 bit

    Hello,
    For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
    The problem:
    Printing:  Currently receiving an "Error - Offline" message in my printer queue at all times.
    Scanning:  Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
    Things I have tried:
    Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
    Uninstalled Drivers from CD-ROM, re-installed, countless times
    Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
    Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
    Installed Drivers and finding the printer myself through it's own static IP address.
    Turned off firewall and attempted to print (after reboot), same errors
    Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
    Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
    Things I have not tried:
    Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
    Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
    You tell me
    Curiosities:
    I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
    Weird that it is not recognizing the model number.
    Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
    Theories:
    I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
    Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that. 
    Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

    Hi Zerosouls,
    I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
    First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
    Restart the computer after this step and try installing Hp Officejet 6600 again.
    Please let me know what happens
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Driver issue after Downgradin​g to Windows 7 (Pavilion 17-f081no)

    So,i went to downgrade yesterday,and have had this problem ever since. Nothing works except one USB port at the right side of the laptop (when looked at front),no usb connections,no wireless or wired connection,nothing. They are all dead,including SD card slot.
    I know its the driver issue,but i cant seem to find them. I need something for USB ports,Ethernet/Network card/,SM BUS controller etc. They are all listed under "Other devices" in Device manager.
    What drivers should i be getting? I have been trying to google,but i am starting to feel really hopeless here.
    My wireless card info:
    PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_00
    PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C
    PCI\VEN_10EC&DEV_B723&CC_028000
    PCI\VEN_10EC&DEV_B723&CC_0280

    Hi:
    First install the amd chipset drivers and reboot.
    http://support.amd.com/en-us/download/chipset?os=W​indows%207%20-%2064
    See if the generic amd graphics driver works...
    http://support.amd.com/en-us/download/mobile?os=Wi​ndows%207%20-%2064
    Ethernet:  DL and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy​...
    Wireless:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​wItemId=ob_143747_1
    Bluetooth:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​wItemId=ob_142906_1
    Card reader:  DL and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT​...

Maybe you are looking for