Kernel data inpage error beim ideapad s400

Hallo, ich versuche schon seit drei Tagen das Upgrade von Windows 10 zu installieren.Zuerst wurde das Upgrade vom Windows Updater abgebrochen und es stand lediglich "fehler" hinter dem Punkt "letztes Update am:"Mittlerweile ist es so das der Rechner neu startet das Update laden tut und dann mit dem Hinweis: es ist ein Fehler aufgetreten, ein Neustart ist erforderlich.Darunter steht dann: ich soll nach dem kernel data inpage error googlen für weitere Infos. Habe schon CHKDSK ausgeführt  TuneUp und zwei Regcleaner laufen lassen ohne Erfolg. Evtl. kann mir ja hier geholfen werden. Hoffe ich. :-/ Mfg René

also im minidump ist nur ein ordner. hoffe mal ie screenshots sind richtig. so hoffe mal das ist richtig so hab einfach mal die ganze Liste rein gestellt evtl. existiert ja der Fehler schon länger u war nur noch nie relevant.

Similar Messages

  • Error code kernel data inpage , memory management , 0xc000021a , 0xc00000e9 on windows 8

    Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
    an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
    mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
    either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD.  Plzz help me to get out of this problem.
    I can't even access my laptop and I am using my windows phone to post this.

    Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
    an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
    mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
    either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD.  Plzz help me to get out of this problem.
    I can't even access my laptop and I am using my windows phone to post this.

  • Kernal Data Inpage Error, No Bootable Device, Critical Process Died AGAIN! Please help!

    I bought this S55-A5295 in July 2013. It started to have problems in April 2014. After 3 months of Critical Process Died, No Bootable Device, and having it shut down multiple times a day, I eventually convince service to take accept it because when I tried to do the recovery, the hard drive was missing partitions needed. (My $30 to ship, despite under warranty)
    I received it back late June. The factory replaced the faulty screen (a different problem), but did not replace the hard drive. They supposedly "fixed" it, and added the needed partitions, should I need to do recovery again. I know that the partition was added because when I got it back, instead of being like new out of the box and ready to use, I was locked out because it was set to administrator and there was no option to access it, so I had to use the partitioned info. and do ANOTHER reset after getting it back from them. Not great service all around.
    Now the laptop is out of warranty and I've started having problems again.
    Sept. 16 -- I had a Kernal Data Inpage Error. The laptop made a horrible sound and shut down. At the time there was a Toshiba Canvio Slim II external drive attached.
    Sept. 18 -- EFI\Microsoft\Boot\BCD 0xc00000bb the boot configuration data for your PC is missing or containing errors.
    Sept. 19 -- Kernal Data Inpage Error. At this point I had removed the external drive, in case that was the problem. It wasn't letting me remove it earlier in the week. I didn't use it much over the next week.
    Sept. 27 -- No Bootable Device.
    Sept. 30 -- Kernal Data Inpage Error (volmgrx.sys)
    Then Critical Process Died -- 3 different times
    Then it restarted itself once without an error code.
    Today, Oct. 1, I installed updates from Toshiba, including one fpr HDD and I performed maintenance. I tried to do the hard drive check, but the tabs in the instructions on the computer don't actually exist.
    The directions: go to Computer, Properties, Tools tab (can't find it) , so no Error Checking and Check.
    However, I did find, under Performance information and Tools my computer's performance rating. The Primary Hard Disk data transfer rate is 5.9.
    So far it hasn't shut down today and hopefully the updates have fixed any issues, but I want to be prepared if they don't.
    Are these errors coming from my laptop's hard drive? Is there a way for me to actually check that? Are the errors somehow connected to my TOSHIBA external drive? I haven't connected the external drive since the errors started happening, but i will need to use it again at some point, I just wanted to make sure the laptop was okay first.
    Also, I am still running Windows 8. That's what they reset it to at the factory, and last time the issues seemed to correspond to me upgrading to 8.1, so I am wary to end up with a $600 paper weight again.
    Please advise. Thanks!!

    ..went through the whole reset.   ...   ..do ANOTHER reset after getting it back from them
    What can I say? The gold-standard test for a software problem is to restore the hard disk to its original out-of-the-box contents.
    I'm a Windows specialist. Can't troubleshoot hardware.
    -Jerry

  • Kernel data input error on start up SSD Drive

    Hi All
    I have a HP Pavilion g6-1c58dx Notebook PC which I purchased while on holiday in the US in Jan 2012. This January I upgraded to an 120GB SSD drive from OCZ and Windows 8. From the first day I was receiving an error on start up, the computer would restart and ask me to investigate a "Kernel Data Input Error". I scanned the drive on several occasions and received the all clear. In March the drive just failed completely losing all my data.
    OCZ have replaced the drive with one of their Agility range, once again I am receiving the same start up error and although I have checked I have the latest version of all my drivers etc it persists. I am of course worried that in a few weeks this drive will also fail.
    It seems unlikely that the same error could occur on two different drives, my query is whether there is a known issue with this notebook and SSD drives and whether there is a solution to the problem.
    Thank You
    Gareth

    I understand that you are receiving a Kernel Data Input Error.
    Is this a blue screen error?  If so, does it give any more details through a more details option?  Some Windows 8 blue screen errors provide less information upfront with a more information option.  
    If it is a blue screen error, uploading the file and sharing the link may be helpful in identifying the core of the issue.
    This site details how to do this using Sky Drive, a Microsoft service.
    Is there a common event (opening a program, performing an action, etc.) that precedes the error?
    If you run the start-up or run-in test (power on and press F2), does the RAM pass the test?  To rule in or out a RAM issue, it may be beneficial to use the run-in test overnight.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Kernel data error occuring while installation of windows 10

    i have downloaded windows 10 but during its installation my laptop's screen turn blue and shows "kernel data inpage error" and says that laptop needs a restart...and when my laptop restarts its shows no reboot device found and no operating system is found in your hardrive....then i have to press my laptops power button and shut it down and then again turn on my laptop.....three times i have tried installing windows 10 and each time this error  has occured........please someone answer me that what is this kernel inpage error?....what is this reboot device?....and what should i do to fix this problem?

    Hi,
    While doing a fresh install of Windows server 2012 R2 on a machine I am getting error as
    "Windows could not update the computer's boot configuration. Installation cannot proceed."
    I have even tried to delete all the partitions and then tried to do the installation but similar error pop up after complete installation.
    Even I tried to run bootrec with /fixmbr /fixboot but still no resort.
    Any thoughts how to fix the issue.
    Thanks in advance.
    you need a fairly modern rig with lots of RAM to run Server 2012 R2
    Corsair Carbide 300R with window
    Corsair TX850V2 12V1 70A
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 660 Ti FTW Signature
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 x64 Professional
    LG WH14NS40 14X Blu-Ray Writer BDXL 128GB
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M

  • Blue screen - Data Inpage Kernel Error on Satellite Pro L

    I have had my laptop 6 months now.
    Now a blue screen comes and says - Data Inpage Kernel Error.
    I reset back to factory settings but it is still happening.Is the hard drive knackered?
    If so is it covered by the warranty?
    If not which hard drive do i need and where can i get it from.
    Many Thanks for your help.

    Hi mono33,
    > I reset back to factory settings but it is still happening.
    This would mean its no software malfunction and its serious hardware issue. If your notebook is under warranty, the repair is covered by warranty and ASP will repair the unit for free.
    So at first I would check if the notebook is under warranty. If yes give it to an ASP and the gus can repair the notebook. Otherwise you can also ask an ASP for help but its not for free.
    Theoretically it could be HDD related but it could be another hardware part as well.

  • 10.4.9 Upgrade: Fails. Reboot results in Kernel Panic ACPI error

    I am upgrading 11 MacBook Pros 10.4.6 to 10.4.9. Becasue they are all on a slow Wifi I am using the manual updates via a thumb drive.
    So far 2 out of 6 have failed the install process. One gave me a general error. I tried to re-run the program but when I did the font for the drop down menu turned into all boxes with capital As inside them. In both cases when I have rebooted I have gotten a Kernel Panic ACPI error. I have tried all the Kernel Panic tricks mentioned in the 10.4.9 threads. I am now reinstalling on the two machines.
    1 of 6 did the install just fine but is now stopped on the "Starting Mac OS X..." screen with a full blue bar.
    Does anyone have any idea what is wrong?

    You may find the following useful:
    From a recent article at MacFixit:
    Mac OS X 10.4.9 Special Report: Update procedure recommendation
    First, make a full backup of your current Mac OS X installation -- preferably a clone ( try SuperDuper! or Carbon Copy Cloner). If something goes wrong, or you experience a major incompatibility after updating, the backup will prove invaluable.
    Next, if you are the cautious type, run a disk repair on the volume targeted for installation. You can use an n alternative startup drive or your Mac OS X installation disc. If you are starting up from your Mac OS X install disc, put the disc in your optical drive and restart holding down the "C" key. After your system starts up and you've selected your language, go to the "Utilties" menu and select "Disk Utility." Use the "Repair Disk" function. After disk repairs are complete, restart from your normal startup drive and continue.
    Avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring.
    Performing other tasks during the update process potentiates various issues, including problems with prebinding (which is happening during the "Optimizing the system" phase of the update process) and others that can occur when files are being replaced by the update are also being read/written by the currently logged in user. You should not only refrain from launching applications or working with files during the update process, but also from putting the system to sleep, disconnecting/connecting devices, and other potentially interruptive actions.
    In addition, before installing the update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying Mac OS X 10.4.9 (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted. Also, note that the first restart after applying Mac OS X 10.4.9 may be abnormally long. Subsequent restarts should take place at normal speed.
    And this further article from MacFixit is also very important:
    When a Mac OS X update won't install with "Volume does not meet requirements for this update" message
    The error message "Volume does not meet requirements for this update" may appear when attempting to install a Mac OS X updater or a full release from disc. Generally the problem falls into one of the following categories:
    Make sure you are using the right updater (Server vs. client) There are usually a few varieties of the same Mac OS X update version. Make sure that you are not trying to install the Intel client build on a PowerPC-based Mac, or the Server build on a Mac OS X client system.
    Although we generally recommend using the standalone Mac OS X updaters rather than Software Update, the latter method will generally correctly identify the copy of Mac OS X applicable to your current system state.
    Retail vs. shipped-with-system (build numbers) Different Macs ship with different builds of Mac OS X, and one build may not be compatible with a different system. The build that ships with a MacBook Core 2 Duo, for instance, may not properly install on a Mac Pro. Hence you may receive the "Volume does not meet requirements for this update" message when mixing and matching systems and discs.
    Some retail copies of Mac OS X 10.4.x may also be unable to install on some systems that require newer builds.
    In addition, it appears that while some builds will install on specific systems, those systems will then refuse to accept subsequent updates. To ensure compatibility, inspect the following matrices:
    • Mac OS: Versions, builds included with Intel-based Macs
    http://docs.info.apple.com/article.html?artnum=303315
    • Mac OS: Versions, builds included with PowerPC Macs (since 1998)
    http://docs.info.apple.com/article.html?artnum=25517
    and note that you should not use a Mac OS version earlier than the one included with the computer.
    Combo vs. Delta Remember that delta Mac OS X updaters can only update systems version-to-version, e.g. Mac OS X 10.4.8 to Mac OS X 10.4.9. Combo updaters can bring any version within the scope of a major release (Panther, Tiger, etc.) up-to-date, e.g. Mac OS X 10.4.3 to Mac OS X 10.4.9.
    Attempting to run a delta update on anything other than the directly precedent version may result in the "Volume does not meet requirements for this update" message.

  • Solaris 8 hangs and data access error on reboot

    Hi
    using solaris 5.8 on UltraSPARC-IIi 360MHz.
    I know it is an old hardware but similiar hardware is running fine. here is the issue,
    System booted : works okay for some time then display was hung so system was rebooted ..it gave data access error. again rebooted and it came up fine..
    I have pasted the /var/adm/messages here..
    http://pastebin.com/m5d2d1d53
    Is it a CPU problem or Hard disk or memory issue ? or something else ?
    what could be solution , a kernel patch is an option ?
    uname -a
    SunOS sparc5 5.8 Generic_108528-07 sun4u sparc SUNW,Ultra-5_10
    test-all at OBP did not show any error.. passed all.
    Thanks

    I cant see the /var/adm/messages output, Since you have already performed a Full Diagnostic check, then you boot your solaris using CD and then perform full FSCK on root File Systems and see any errors get reported. Keep doing fsck 2 -3 times untill all the errors are clean.
    Also you must check the latest patches available for this system architecture.

  • Personnel Data Iview Error (It's very Urgent)

    Hi All,
    Personal Data   
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'   
    Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
         at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
         at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
         ... 65 more
    Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
    Hi Please help me to solve this error it's very urgent ?
    thanks and regards,
    Phanikumar.

    Hi Ashutosh Gulkhobre,
    I coppied the dump from the ST22.
    Now please tell me solution fro this error ?
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          27.06.2007 09:54:55
         Short text
              Access via 'NULL' object reference not possible.
         What happened?
              Error in the ABAP Application Program
              The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
               has
              come across a statement that unfortunately cannot be executed.
         What can you do?
              Note down which actions and inputs caused the error.
              To process the problem further, contact you SAP system
              administrator.
              Using Transaction ST22 for ABAP Dump Analysis, you can look
              at and manage termination messages, and you can also
              keep them for a long time.
         Error analysis
              An exception occurred that is explained in detail below.
              The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
               caught in
              procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
               clause.
              Since the caller of the procedure could not have anticipated that the
              exception would occur, the current program is terminated.
              The reason for the exception is:
              You attempted to use a 'NULL' object reference (points to 'nothing')
              access a component.
              An object reference must point to an object (an instance of a class)
              before it can be used to access components.
              Either the reference was never set or it was set to 'NULL' using the
              CLEAR statement.
         How to correct the error
              Probably the only way to eliminate the error is to correct the program.
              If the error occures in a non-modified SAP program, you may be able to
              find an interim solution in an SAP Note.
              If you have access to SAP Notes, carry out a search with the following
              keywords:
              "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
              "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
              "HRXSS_PER_CLEANUP"
              If you cannot solve the problem yourself and want to send an error
              notification to SAP, include the following information:
              1. The description of the current problem (short dump)
                 To save the description, choose "System->List->Save->Local File
              (Unconverted)".
              2. Corresponding system log
                 Display the system log by calling transaction SM21.
                 Restrict the time interval to 10 minutes before and five minutes
              after the short dump. Then choose "System->List->Save->Local File
              (Unconverted)".
              3. If the problem occurs in a problem of your own or a modified SAP
              program: The source code of the program
                 In the editor, choose "Utilities->More
              Utilities->Upload/Download->Download".
              4. Details about the conditions under which the error occurred or which
              actions and input led to the error.
              The exception must either be prevented, caught within proedure
              "HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
               in the
              RAISING clause of the procedure.
              To prevent the exception, note the following:
         System environment
              SAP-Release 700
              Application server... "ptgsap10"
              Network address...... "192.168.1.18"
              Operating system..... "Windows NT"
              Release.............. "5.2"
              Hardware type........ "2x Intel 80686"
              Character length.... 16 Bits
              Pointer length....... 32 Bits
              Work process number.. 0
              Shortdump setting.... "full"
              Database server... "PTGSAP10"
              Database type..... "ORACLE"
              Database name..... "EC6"
              Database user ID.. "SAPSR3"
              Char.set.... "C"
              SAP kernel....... 700
              created (date)... "Aug 29 2006 00:18:21"
              create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
              Database version. "OCI_10201_SHARE (10.2.0.1.0) "
              Patch level. 75
              Patch text.. " "
              Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
              SAP database version. 700
              Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
              Memory consumption
              Roll.... 8176
              EM...... 2090448
              Heap.... 0
              Page.... 0
              MM Used. 1208256
              MM Free. 880672
         User and Transaction
              Client.............. 001
              User................ "ESS_USER1"
              Language Key........ "E"
              Transaction......... " "
              Program............. "SAPLHRXSS_PER_MAC"
              Screen.............. "SAPMSSY1 3004"
              Screen Line......... 2
              Information on caller of Remote Function Call (RFC):
              System.............. "########"
              Database Release.... 645
              Kernel Release...... 700
              Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
              Call Type........... "synchron and non-transactional (emode 0, imode 0)"
              Inbound TID.........." "
              Inbound Queue Name..." "
              Outbound TID........." "
              Outbound Queue Name.." "
              Client.............. "###"
              User................ "############"
              Transaction......... " "
              Call Program........." "
              Function Module..... "HRXSS_PER_CLEANUP"
              Call Destination.... "ptgsap10_EC6_10"
              Source Server....... "EPSAND1"
              Source IP Address... "192.168.1.36"
              Additional information on RFC logon:
              Trusted Relationship " "
              Logon Return Code... 0
              Trusted Return Code. 0
              Note: For releases < 4.0, information on the RFC caller are often
              only partially available.
         Information on where terminated
              Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
               "HRXSS_PER_CLEANUP".
              The main program was "SAPMSSY1 ".
              In the source code you have the termination point in line 13
              of the (Include) program "LHRXSS_PER_MACU04".
              The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
              procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
               nor declared
              in the RAISING clause of its signature.
              The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
               line
              1 of the (Include program "LHRXSS_PER_MACU04 ".
         Source Code Extract
         Line     SourceCde
             1     FUNCTION hrxss_per_cleanup.
             2     *"----
             3     ""Local interface:
             4     *"  EXPORTING
             5     *"     VALUE(MESSAGES) TYPE  BAPIRETTAB
             6     *"----
             7     
             8     *  CALL METHOD mac_adapter->cleanup
             9     *    IMPORTING
            10     *      messages = messages.
            11     
            12     * TRY.
         >>>>>       CALL METHOD xss_adapter->cleanup
            14         .
            15     * CATCH CX_HRPA_VIOLATED_ASSERTION .
            16     * ENDTRY.
            17       IF NOT xss_adapter2 IS INITIAL.
            18         CALL METHOD xss_adapter2->cleanup.
            19       ENDIF.
            20     
            21     ENDFUNCTION.
         Contents of system fields
         Name     Val.
         SY-SUBRC     0
         SY-INDEX     2
         SY-TABIX     13
         SY-DBCNT     30
         SY-FDPOS     0
         SY-LSIND     0
         SY-PAGNO     0
         SY-LINNO     1
         SY-COLNO     1
         SY-PFKEY     
         SY-UCOMM     
         SY-TITLE     CPIC and RFC Control
         SY-MSGTY     
         SY-MSGID     
         SY-MSGNO     000
         SY-MSGV1     
         SY-MSGV2     
         SY-MSGV3     
         SY-MSGV4     
         SY-MODNO     0
         SY-DATUM     20070627
         SY-UZEIT     095455
         SY-XPROG     SAPLHRXSS_PER_MAC
         SY-XFORM     HRXSS_PER_CLEANUP
         Active Calls/Events
         No.   Ty.          Program                             Include                             Line
               Name
             4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
               HRXSS_PER_CLEANUP
             3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
               HRXSS_PER_CLEANUP
             2 FORM         SAPMSSY1                            SAPMSSY1                               85
               REMOTE_FUNCTION_CALL
             1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
               %_RFC_START
         Chosen variables
         Name
             Val.
         No.          4     Ty.      FUNCTION
         Name      HRXSS_PER_CLEANUP
         MESSAGES
              Table[initial]
         SY-XFORM
              HRXSS_PER_CLEANUP
                 455555545544444552222222222222
                 82833F052F3C51E500000000000000
                 000000000000000000000000000000
                 000000000000000000000000000000
         %_DUMMY$$
                 2222
                 0000
                 0000
                 0000
         XSS_ADAPTER2
                 F0000000
                 F0000000
         No.          3     Ty.      FORM
         Name      HRXSS_PER_CLEANUP
         SYST-REPID
              SAPLHRXSS_PER_MAC
                 5454455555545544422222222222222222222222
                 310C82833F052FD1300000000000000000000000
                 0000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000
         %_%_MESSAGES
              Table[initial]
         No.          2     Ty.      FORM
         Name      REMOTE_FUNCTION_CALL
         %_DUMMY$$
                 2222
                 0000
                 0000
                 0000
         SY-REPID
              SAPMSSY1
                 5454555322222222222222222222222222222222
                 310D339100000000000000000000000000000000
                 0000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000
         SYST-REPID
              SAPMSSY1
                 5454555322222222222222222222222222222222
                 310D339100000000000000000000000000000000
                 0000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000
         HEADER
                 000000000000
                 000000000000
         TYPE
              3
                 0000
                 3000
         SY-XPROG
              SAPLHRXSS_PER_MAC
                 5454455555545544422222222222222222222222
                 310C82833F052FD1300000000000000000000000
                 0000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000
         %_ARCHIVE
                 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
         RC
              0
                 0000
                 0000
         SY-XFORM
              HRXSS_PER_CLEANUP
                 455555545544444552222222222222
                 82833F052F3C51E500000000000000
                 000000000000000000000000000000
                 000000000000000000000000000000
         %_SPACE
                 2
                 0
                 0
                 0
         No.          1     Ty.      MODULE (PBO)
         Name      %_RFC_START
         %_PRINT
                  000                                                                                0###
                 2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
         RFCTYPE_INTERNAL
              3
                 0000
                 3000
         Internal notes
              The termination was triggered in function "method_call_iref"
              of the SAP kernel, in line 2203 of the module
               "//bas/700_REL/src/krn/runt/abmethod.c#7".
              The internal operation just processed is "METH".
              Internal mode was started at 20070627095455.
         Active Calls in SAP Kernel
         Lines of C Stack in Kernel (Structure Differs on Each Platform)
         SAP (R) - R/3(TM) Callstack, Version 1.0
         Copyright (C) SAP AG. All rights reserved.
         Callstack without Exception:
         App       : disp+work.EXE (pid=24080)
         When      : 6/27/2007 9:54:55.565
         Threads   : 2
         Computer Name       : PTGSAP10
         User Name           : SAPServiceEC6
         Number of Processors: 2
         Processor Type: x86 Family 6 Model 11 Stepping 1
         Windows Version     : 5.2 Current Build: 3790
         State Dump for Thread Id 6cd0
         eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
         eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0         nv up ei ng nz ac po cy
         cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00200297
         function : KiFastSystemCallRet
                 7c82ed54 c3               ret
                 7c82ed55 8da42400000000   lea     esp,[esp]              ss:0549c640=7c822124
                 7c82ed5c 8d642400         lea     esp,[esp]              ss:27f2ac53=????????
         FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
         0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
         0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
         0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
         0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
         0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
         0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
         0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
         0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
         0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
         0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
         0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
         0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
         0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
         0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
         0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
         0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
         0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
         0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
         0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
         0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
         0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
         0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
         0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
         State Dump for Thread Id 6408
         eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
         eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0         nv up ei pl zr na po nc
         cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
         function : KiFastSystemCallRet
                 7c82ed54 c3               ret
                 7c82ed55 8da42400000000   lea     esp,[esp]              ss:0770fec0=7c821514
                 7c82ed5c 8d642400         lea     esp,[esp]              ss:2a19e4d3=????????
         FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
         0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
         0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
         0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
         0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
         List of ABAP programs affected
         Index     Typ     Program     Group     Date     Time     Size     Lang.
              0     Prg     SAPMSSY1          0     11.04.2005     09:27:15         21504     E
              1     Prg     SAPLHRXSS_SER_AUTHORITHY_CHECK          1     13.02.2005     19:00:30         16384     E
              2     Prg     SAPLASTAT_TRIG          2     09.09.2004     14:18:33         13312     E
              3     Typ     ASTAT_TYP2          0     10.11.1998     05:35:18          2048     
              4     Typ     ASTAT_TYP1          0     30.11.1998     15:54:16          2048     
              5     Prg     SAPLSAUTHTRACE          5     07.03.2005     08:51:05         57344     E
              6     Typ     USOBHASH          0     02.07.2003     13:15:24          3072     
              7     Prg     SAPLSECH          7     05.07.2005     13:10:18         26624     E
              8     Typ     CVERS          0     09.11.2000     14:05:49          2048     
              9     Prg     SAPLHRXSS_PER_MAC          9     10.02.2004     14:21:15         49152     E
             10     Prg     CX_SY_REF_IS_INITIAL==========CP         10     05.07.2005     13:10:16         10240     E
             11     Typ     SCX_SRCPOS          0     18.05.2004     14:07:11          2048     
             12     Prg     CX_DYNAMIC_CHECK==============CP         12     05.07.2005     13:10:16         10240     E
             13     Prg     CX_ROOT=======================CP         13     05.07.2005     13:10:16         11264     E
             14     Prg     CX_NO_CHECK===================CP         14     05.07.2005     13:10:16         10240     E
             15     Prg     CX_SY_NO_HANDLER==============CP         15     05.07.2005     13:10:16         10240     E
             16     Typ     SYST          0     09.09.2004     14:18:12         31744     
         Directory of Application Tables
         Name                                     Date       Time       Lngth
             Val.
         Program      SAPMSSY1
         SYST            .  .            :  :          00004612
              \0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
         ABAP Control Blocks (CONT)
         Index     Name     Fl     PAR0     PAR1     PAR2     PAR3     PAR4     PAR5     PAR6     Source Code     Line
           246     FUNC     03     0020                                   LHRXSS_PER_MACU03            1
           247     PAR2     02     0000     001B     C000                         LHRXSS_PER_MACU03            1
           249     FUNC     13     0003                                   LHRXSS_PER_MACU03            1
           250     PAR2     01     0000     0011     C001                         LHRXSS_PER_MACU03            1
           252     FUNC     FF     0000                                   LHRXSS_PER_MACU03            1
           253     ENDF     00     0000                                   LHRXSS_PER_MACU03            1
           254     -
         00     0000                                   LHRXSS_PER_MACU03            1
           255     STCK     02     C001                                   LHRXSS_PER_MACU03            1
           256     CPOP     00     0000                                   LHRXSS_PER_MACU03            1
           257     -
         00     0000                                   LHRXSS_PER_MACU03            1
           258     FUNP     3E     0000     0011     8000     0000     8000     0000     0000     LHRXSS_PER_MACU04            1
           262     FUNP     80     0000     0000     0000     0000     0000     0000     0000     LHRXSS_PER_MACU04            1
         >>>>>     METH     03     0000     0000     8006     0000     0000     0000     0000     LHRXSS_PER_MACU04           13
           270     PAR2     00     0000     0001     0000                         LHRXSS_PER_MACU04           13
           272     CMPS     20     024B     001B     001B                         LHRXSS_PER_MACU04           17
           274     BRAF     05     0007                                   LHRXSS_PER_MACU04           17
           275     METH     03     0000     0001     8006     0000     0000     0000     0000     LHRXSS_PER_MACU04           18
           279     PAR2     00     0000     0001     0000                         LHRXSS_PER_MACU04           18
           281     FUNE     00     0000                                   LHRXSS_PER_MACU04           21
           282     -
         00     0000                                   LHRXSS_PER_MACU04           21
    Thanks and Regards,
    Phanikumar

  • Kernel[0]: (default pager): [KERNEL]: Swap File Error.

    Hello,
    I am hoping that I can get some help in understanding what might have gone wrong here to create the mass hanging of many apps as depicted in the attached image below.
    This is what I pulled from the logs:
    Sep 11 08:47:10 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    Sep 11 08:47:10 steve kernel[0]: low swap: suspending pid 622 (Adobe Photoshop )
    Sep 11 08:47:10 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
    Sep 11 08:47:14 steve com.apple.launchd[1] (com.apple.sleepservicesd[12240]): Exited: Killed: 9
    Sep 11 08:47:14 steve kernel[0]: memorystatus_thread: idle exiting pid 12240 [SleepServicesD]
    Sep 11 08:47:14 steve com.apple.launchd[1] (com.apple.xpcd.0A040000-0000-0000-0000-000000000000[12237]): Exited: Killed: 9
    Sep 11 08:47:14 steve kernel[0]: memorystatus_thread: idle exiting pid 12237 [xpcd]
    Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
    Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    Sep 11 08:47:16 --- last message repeated 2 times ---
    Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: Switching ON Emergency paging segment
    Sep 11 08:47:18 steve kernel[0]: Sandbox: sandboxd(12246) deny mach-lookup com.apple.coresymbolicationd
    Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/ByHost/.GlobalPreferences.7FC032 09-A3F5-5B8F-ADA4-A2EA48544DC8.plist
    Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/.GlobalPreferences.plist
    Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/.CFUserTextEncoding
    Sep 11 08:48:07 steve com.apple.launchd[1] (com.apple.sleepservicesd[12243]): Exited: Killed: 9
    Sep 11 08:48:07 steve kernel[0]: memorystatus_thread: idle exiting pid 12243 [SleepServicesD]
    Sep 11 08:48:08 steve kernel[0]: ]: ps_allocate_cluster - send HI_WAT_ALERT
    Sep 11 08:48:08 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
    Sep 11 08:48:09 --- last message repeated 403 times ---
    Sep 11 08:48:09 steve kernel[0]: nd HI_WAT_ALERT
    Sep 11 08:48:09 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
    Sep 11 08:48:39 --- last message repeated 171 times ---
    Sep 11 08:49:04 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92b015e00 (pid 622) sleeping due to too many errors (num usleeps 21)
    Sep 11 08:49:17 steve kernel[0]: Sandbox: sandboxd(12256) deny mach-lookup com.apple.coresymbolicationd
    Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/ByHost/.GlobalPreferences.7FC032 09-A3F5-5B8F-ADA4-A2EA48544DC8.plist
    Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/.GlobalPreferences.plist
    Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/.CFUserTextEncoding
    Sep 11 08:49:28 steve com.apple.launchd.peruser.89[451] (com.apple.cfprefsd.xpc.agent[12253]): Exited: Killed: 9
    Sep 11 08:49:28 steve kernel[0]: memorystatus_thread: idle exiting pid 12253 [cfprefsd]
    Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: System is out of paging space.
    Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
    Sep 11 08:49:28 steve kernel[0]: low swap: suspending pid 7864 (Microsoft PowerP)
    Sep 11 08:49:28 steve kernel[0]: low swap: suspending pid 658 (Google Chrome)
    Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
    Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
    Sep 11 08:49:29 --- last message repeated 8 times ---
    Sep 11 08:49:29 steve kernel[0]: te_cluster - send HI_WAT_ALERT
    Sep 11 08:49:29 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
    Sep 11 08:49:34 --- last message repeated 224 times ---
    Sep 11 08:49:34 steve.local QuickLookUIHelper[12258]: [QL] QuickLookUIHelper is stuck - force quit now
    Sep 11 08:50:02 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92e809400 (pid 593) sleeping due to too many errors (num usleeps 42)
    Sep 11 08:50:02 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92e805400 (pid 1988) sleeping due to too many errors (num usleeps 42)
    Sep 11 08:51:07 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92b015e00 (pid 622) sleeping due to too many errors (num usleeps 75)
    Other notes that might help yuo help me.
    Machine is an iMac with 16gig of RAM.
    There are two partitions on the drive... one for the OS and one for users.
    The OS has an 80gig Partition with 50% free space.
    The User partition is much more with about 75% free space.
    In the past I have noticed Photoshop to be using over 8gig of RAM so maybe it is photoshop.
    Thanks
    Morgs

    There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
    You have a long-running process with a memory leak (i.e., a bug), or
    You don't have enough memory installed for your usage pattern.
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • Utmpx error Kernel Reader uptime error

    I have 12k System controllers both with the same issue; a black splat on the Kernel Reader->System block. The log file indicates:
    warning Dec 15 03:01:49 agent data update error: .iso.org.dod.[...].kernelReader.load.uptime
    warning Dec 15 03:01:49 agent data update error: Unable to get boot time from utmpx
    Anyone experience this before? Any suggestions welcome.
    Regards,
    Jeff Grabell

    Hi Jeff,
    Does the regular Solaris "uptime" command work on those hosts? I think uptime (and the SunMC kr package that gets the data for that part of Kernel Reader) get their information from /var/adm/utmpx(wtmpx?) files. Have you done anything on those boxes that would erase/truncate those files?
    I'm just guessing here - I've never seen your problem before. Please post the solution if you figure it out.
    Regards,
    Mike Kirk
    Standard disclaimer: I am an employee of Halcyon (www.HalcyonInc.com)

  • Update 30 unusable. EVERY page: kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128dea000, protections wer

    EVERY page that tries to open causes FF to become Not Responding:
    6/11/14 4:50:05 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128dea000, protections were read-write
    6/11/14 4:50:13 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128deb000, protections were read-write
    6/11/14 4:50:17 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128dec000, protections were read-write
    6/11/14 4:50:21 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128ded000, protections were read-write
    etc. Forever.

    Nope. After turning it off, FF became NOT RESPONDING. Restarted, and happened again. Using Safe Mode now.
    6/11/14 7:51:10 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x117b86000, protections were read-write
    6/11/14 7:51:12 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x117b87000, protections were read-write
    6/11/14 7:51:14 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
    6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:51382 from 4.2.2.3:53
    6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:51585 from 4.2.2.3:53
    6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:50260 from 4.2.2.3:53
    6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:58396 from 4.2.2.3:53
    6/11/14 7:51:18 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:64932 from 4.2.2.3:53
    6/11/14 7:51:18 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:62508 from 4.2.2.3:53
    6/11/14 7:51:30 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaac000, protections were read-write
    6/11/14 7:51:30 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:55176 from 4.2.2.3:53
    SNIP SOME CHARACTERS FOR 10k LIMIT IN POST
    HOW THE HELL CAN I HAVE "EXCEEDED THE NUMBER OF ANSWERS THAT CAN BE POSTED IN A GIVEN AMOUNT OF TIME when every attempt was blocked for being over 10k characters? how the hell are you supposed to EDIT these?
    PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:56995 from 4.2.2.3:53
    6/11/14 7:51:32 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
    6/11/14 7:51:32 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:61082 from 4.2.2.3:53
    6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:50233 from 4.2.2.3:53
    6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63359 from 173.194.68.191:80
    6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63361 from 173.194.68.191:80
    6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63355 from 74.125.228.3:80
    6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:62761 from 4.2.2.3:53
    6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63358 from 173.194.68.191:80
    6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:62393 from 4.2.2.3:53
    6/11/14 7:51:34 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaaf000, protections were read-write
    6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63349 from 93.99.92.186:80
    6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
    6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63347 from 93.99.92.186:80
    6/11/14 7:51:35 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaaf000, protections were read-write
    6/11/14 7:51:35 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63348 from 93.99.92.186:80
    6/11/14 7:51:36 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
    6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63359 from 173.194.68.191:80
    6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63361 from 173.194.68.191:80
    6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63355 from 74.125.228.3:80
    6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63358 from 173.194.68.191:80
    6/11/14 7:51:38 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaaf000, protections were read-write
    6/11/14 7:51:38 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
    6/11/14 7:51:40 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63349 from 93.99.92.186:80
    6/11/14 7:51:40 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63347 from 93.99.92.186:80
    6/11/14 7:51:41 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63348 from 93.99.92.186:80
    6/11/14 7:51:41 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab0000, protections were read-write
    6/11/14 7:51:42 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab0000, protections were read-write
    6/11/14 7:51:43 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab1000, protections were read-write
    6/11/14 7:51:44 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab1000, protections were read-write
    6/11/14 7:51:45 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab1000, protections were read-write
    6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63359 from 173.194.68.191:80
    6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63361 from 173.194.68.191:80
    6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63355 from 74.125.228.3:80
    6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63358 from 173.194.68.191:80
    6/11/14 7:51:46 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
    6/11/14 7:51:50 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b7000, protections were read-write
    6/11/14 7:51:51 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b7000, protections were read-write
    6/11/14 7:51:53 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b7000, protections were read-write
    6/11/14 7:51:54 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b8000, protections were read-write
    6/11/14 7:51:56 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b8000, protections were read-write
    6/11/14 7:51:57 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b8000, protections were read-write
    6/11/14 7:51:57 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
    6/11/14 7:51:59 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b9000, protections were read-write
    6/11/14 7:52:00 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b9000, protections were read-write
    6/11/14 7:52:01 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b9000, protections were read-write
    6/11/14 7:52:03 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9ba000, protections were read-write
    6/11/14 7:52:04 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9ba000, protections were read-write
    6/11/14 7:52:07 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9bb000, protections were read-write
    6/11/14 7:52:14 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9bc000, protections were read-write
    6/11/14 7:52:18 PM [0x0-0x310310].org.mozilla.firefox[6634] [6644] ###!!! ABORT: Aborting on channel error.: file /builds/slave/rel-m-rel-osx64_bld-0000000000/build/ipc/glue/MessageChannel.cpp, line 1522
    6/11/14 7:52:18 PM [0x0-0x310310].org.mozilla.firefox[6634] [6644] ###!!! ABORT: Aborting on channel error.: file /builds/slave/rel-m-rel-osx64_bld-0000000000/build/ipc/glue/MessageChannel.cpp, line 1522
    6/11/14 7:52:18 PM com.apple.launchd.peruser.501[112] ([0x0-0x310310].org.mozilla.firefox[6634]) Exited: Terminated
    6/11/14 7:52:19 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
    6/11/14 7:52:25 PM kernel firefox (map: 0x17d5e0a4) triggered DYLD shared region unnest for map: 0x17d5e0a4, region 0x7fff81000000->0x7fff81200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    6/11/14 7:52:28 PM ReportCrash[6652] Saved crash report for plugin-container[6644] version ??? (1.0) to /Users/hal9000/Library/Logs/DiagnosticReports/plugin-container_2014-06-11-195228_Hal-9000s-MBP.crash
    6/11/14 7:52:29 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:60331 from 4.2.2.3:53

  • Kernel[0]: [bdiokit_uc] [error] vn_getpath_ failed:22

    Ich habe ständig beim Öffnen der Apple Mail die Info in der Konsole:
    kernel[0]: [bdiokit_uc] [error] vn_getpath_ failed:22 (request: 46177)
    die Meldungen werden ständig wiederholt, gefühlte 100 Mal.
    Wie kann ich das ändern, woran liegt diese Meldung, was ist hier fehlerhaft?
    iMac (27-inch Mid 2011), OS X Mavericks (10.9.5),

    Ich habe gerade festgestellt, dass diese Meldung auch beim Neustarten kommt, liegt vielleicht gar nicht an Apple Mail.
    Woran dann und was besagt die Meldung? Wie kann ich das Reparieren?
    Wer weiß etwas?
    Vielen Dank

  • Ideapad S400 Brightness Problem

    I'm having a problem with a Lenovo Ideapad S400 Laptop on Linux. The brightness in any linux distribution is very low in comparison with windows 8 brightness.
    Some people also had the same problem when downgrading from windows 8 to windows 7. See:
    https://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/s405-s400-screen-brightness-issue-after-downg...
    According to lenovo support, the problem is that brightness settings have 101 steps on windows 8 and only 16 steps on windows 7. See this picture to compare:
    http://support.lenovo.com/en_MY/research/hints-or-tips/detail.page?DocID=HT076504
    Is there a specific solution to this problem on linux? For example, a procedure to force the brightness, a kernel module, a solution to a similar problem in another laptop, etc.
    Solved!
    Go to Solution.

    Hi, this problem was corrected on kernel 3.8.3 by the kernel developers! I'm happy to say that many lenovo laptops now work in linux. Unfortunatly, not in windows 7 yet.
    Instructions on ubuntu:
    -go to http://kernel.ubuntu.com/~kernel-ppa/mainline/
    -folder kernel 3.8.3
    -in our case, download linux headers...amd64, linux-headers...all-amd64, linux-img...amd64, linux-image-extra....amd64
    -open the terminal
    -sudo dpkg -i *.deb
    -reboot and enjoy
    PS: Intel has release a new driver for INTEL HD Graphics that works smoothly with ubuntu and it is easy to install.
    instructions on ubuntu:
    -go to https://01.org/linuxgraphics/
    -the rest is easy to follow
    i hope this will work also on other laptops and linux distributions

  • OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

    Hi All,
    I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
    Error infor are as follows:
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    JNDI Name for the Database pool: eis/DB/soademoDatabase
    JNDI Name for the Data source: jdbc/soademoDatabase
    I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
    Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
    Login info in RetrievePersonService-or-mappings.xml
    <login xsi:type="database-login">
    <platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
    <user-name></user-name>
    <connection-url></connection-url>
    </login>
    jca file content are as follows:
    <adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
    <endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
    <interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
    <property name="DescriptorName" value="RetrievePersonService.PersonT"/>
    <property name="QueryName" value="RetrievePersonServiceSelect"/>
    <property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
    <property name="ReturnSingleResultSet" value="false"/>
    <property name="GetActiveUnitOfWork" value="false"/>
    </interaction-spec>
    </endpoint-interaction>
    </adapter-config>
    RetrievePersonService_db.wsdl are as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
    <WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
    <WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
    <WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
    <WL5G3N0:operation name="RetrievePersonServiceSelect">
    <WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
    <WL5G3N0:input>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:input>
    <WL5G3N0:output>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:output>
    </WL5G3N0:operation>
    </WL5G3N0:binding>
    <WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
    <WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
    <WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
    </WL5G3N0:port>
    </WL5G3N0:service>
    </WL5G3N0:definitions>
    Any suggestion is appricated .
    Thanks in advance!
    Edited by: user11262117 on Jan 26, 2011 5:28 PM

    Hi Anuj,
    Thanks for your reply!
    I found that the data source is registered on server soa_server1 as follows:
    Binding Name: jdbc.soademoDatabase
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 80328036
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
    Binding Name: jdbc.SOADataSource
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 92966755
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
    I don't know how to determine which server the DBAdapter is targetted to.
    But I found the following information:
    Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
    Outbound Connection Pool Server State Current Connections Created Connections
    eis/DB/SOADemo AdminServer Running 1 1
    eis/DB/SOADemo soa_server1 Running 1 1
    eis/DB/soademoDatabase AdminServer Running 1 1
    eis/DB/soademoDatabase soa_server1 Running 1 1
    The DbAdapter is related to the following files:
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
    I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
    <?xml version="1.0"?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params>
    <initial-capacity>1</initial-capacity>
    <max-capacity>1000</max-capacity>
    </pool-params>
    <properties>
    <property>
    <name>usesNativeSequencing</name>
    <value>true</value>
    </property>
    <property>
    <name>sequencePreallocationSize</name>
    <value>50</value>
    </property>
    <property>
    <name>defaultNChar</name>
    <value>false</value>
    </property>
    <property>
    <name>usesBatchWriting</name>
    <value>true</value>
    </property>
    <property>
    <name>usesSkipLocking</name>
    <value>true</value>
    </property>
    </properties>
              </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
    <jndi-name>eis/DB/SOADemo</jndi-name>
              <connection-properties>
                   <properties>
                   <property>
                   <name>xADataSourceName</name>
                   <value>jdbc/SOADataSource</value>
                   </property>
                   <property>
                   <name>dataSourceName</name>
                   <value></value>
                   </property>
                   <property>
                   <name>platformClassName</name>
                   <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
                   </property>
                   </properties>
              </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Then I decided to use eis/DB/SOADemo for testing.
    For JDeveloper project, after I deployed to weblogic server, it works fine.
    But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
    BEA-380001: Invoke JCA outbound service failed with application error, exception:
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
    It almost drive me crazy!!:-(
    What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Maybe you are looking for