Kernel data input error on start up SSD Drive

Hi All
I have a HP Pavilion g6-1c58dx Notebook PC which I purchased while on holiday in the US in Jan 2012. This January I upgraded to an 120GB SSD drive from OCZ and Windows 8. From the first day I was receiving an error on start up, the computer would restart and ask me to investigate a "Kernel Data Input Error". I scanned the drive on several occasions and received the all clear. In March the drive just failed completely losing all my data.
OCZ have replaced the drive with one of their Agility range, once again I am receiving the same start up error and although I have checked I have the latest version of all my drivers etc it persists. I am of course worried that in a few weeks this drive will also fail.
It seems unlikely that the same error could occur on two different drives, my query is whether there is a known issue with this notebook and SSD drives and whether there is a solution to the problem.
Thank You
Gareth

I understand that you are receiving a Kernel Data Input Error.
Is this a blue screen error? If so, does it give any more details through a more details option? Some Windows 8 blue screen errors provide less information upfront with a more information option.
If it is a blue screen error, uploading the file and sharing the link may be helpful in identifying the core of the issue.
This site details how to do this using Sky Drive, a Microsoft service.
Is there a common event (opening a program, performing an action, etc.) that precedes the error?
If you run the start-up or run-in test (power on and press F2), does the RAM pass the test? To rule in or out a RAM issue, it may be beneficial to use the run-in test overnight.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Kernel data inpage error beim ideapad s400

Hallo, ich versuche schon seit drei Tagen das Upgrade von Windows 10 zu installieren.Zuerst wurde das Upgrade vom Windows Updater abgebrochen und es stand lediglich "fehler" hinter dem Punkt "letztes Update am:"Mittlerweile ist es so das der Rechner neu startet das Update laden tut und dann mit dem Hinweis: es ist ein Fehler aufgetreten, ein Neustart ist erforderlich.Darunter steht dann: ich soll nach dem kernel data inpage error googlen für weitere Infos. Habe schon CHKDSK ausgeführt TuneUp und zwei Regcleaner laufen lassen ohne Erfolg. Evtl. kann mir ja hier geholfen werden. Hoffe ich. :-/ Mfg René

also im minidump ist nur ein ordner. hoffe mal ie screenshots sind richtig. so hoffe mal das ist richtig so hab einfach mal die ganze Liste rein gestellt evtl. existiert ja der Fehler schon länger u war nur noch nie relevant.

Why is my iMac Start up SSD Drive filling up without any use?

I noticed yesterday that my main boot drive, my SSD drive, on my iMac was seriously depleting in memory without me doing anything or downloading anything either so much so that but 10pm last night it was saying my start up drive was full. I ran Disk Utility on the drive and it said I had a problem and should run in Recovery HD so rebooted the computer and ran it, it said it had fixed permissions so thought all was okay but after rebooting again the memory is still running down!
I also tried erasing the disk and using Time Machine as a back up from a previous time, this had no effect. I thought it could be a Snow Leopard update that came in yesterday but that doesn't seem to be the problem as I have used a back up from before I updated...
I'm literally watching the 'Used' numbers from the Get Info on my SSD drive go up infront of my eyes every few seconds.
Any help would be much appriciated!

In your Mountain Lion's Time Machine settings, you are now allowed to designate not just one only, but multiple Time Machine backup drives, though you don't have to. I'm wondering if possibly your TM settings are backing up one of your internal hard drives both to your external hard drive AND to the internal SSD drive. You might want to check to see if that is the case, and if so, change it.
Hope this helps

Data input error

I am having a strange error I never had before. My program gives me the NumberFormatException every time, the matter what I type in. It seems to be trying to parse the text in the println instead of the actual input, because when I told it to print out "5", instead of "Enter X coordinate of target", it worked. I have used a similar code in the past and it worked fine.
My code is this:
global variables:
static double xTarg= 0.0, yTarg= 0.0;
in main method:
BufferedReader BR = new BufferedReader(new InputStreamReader(System.in));
try {
System.out.println("Enter X coordinate of target");
     xTarg = Double.parseDouble(BR.readLine());
     System.out.println("Enter Y coordinate of target");
yTarg = Double.parseDouble(BR.readLine());
     catch (NumberFormatException e)
          System.out.println("NumberFormatException has happened");
          System.exit(0);
     catch (IOException e)
          System.out.println("bad input");
          System.exit(0);
          }

I ran your code using JCreator and it works fine. Did you use a comma ',' or a dot '.' for the decimal point? Because that seems to make a difference...
#

MacOS X Tiger browser web data input error

We are having a problem a with my wife's Userid on her Mini running Tiger.
(Mini G4/1.25 500MB 40GB Tiger 10.4.9)
First let me confirm that the problem is not system wide because it doesn't happen with two other UserIDs, one Admin and one a normal user.
Also the problem occurs with her three browsers; Safari, Firefox and Camino.
When entering data at a Web site data is getting scrambled, so she can't log onto her protected sites. A/C AeroPlan login is one example.
I realize the problem is related to browser info/data within her Userid.
I don't want to delete everything internet related, but that is my last option.
TIA for any ideas. Gerry
G4/1.25 MDD 1.5GB 400Gb Mac OS X (10.4.9) Several other Macs since 1984

Hi Gerry,
Thanks on the info on this not being system wide, that helps.
Have you tired trashing the Safari cache folder & the other related cache folders for for the other browsers.
Home~/Library/Caches/Safari cache I would start there.
If that doesn't help, try trashing the corresponding .plist files
Home~/Library/Preferences folder/com.apple.Safari.plist
Eme'~[)

Kernel panic when resuming from hibernate with SSD drive

Hi,
i've got a the system described down below.
And because i've got another hd in my laptop (instead of the superdrive) i need to hibernate otherwise my mac will crash after few seconds i make it wake up from sleep.
I've removed the 2nd hd and tried hibernating and it crashes after a little while the progress bar appears. And the the "please hold the power button" screen appears.
Here is what i get:
Interval Since Last Panic Report: 215163 sec
Panics Since Last Report: 2
Anonymous UUID: A67D237A-36E8-4FCD-B352-F20B3E537B23
Mon Oct 25 12:56:21 2010
panic(cpu 0 caller 0x528e19): "Hibernate restore error e00002d5"@/SourceCache/xnu/xnu-1504.7.4/iokit/Kernel/IOHibernateIO.cpp:2403
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
A lot of people with other SSD and newer MacBook Pros seem to have the same issue!
http://forum.corsair.com/v3/showthread.php?p=470361
Is there a software/setting solution or is it an SSD/Apple hardware issue??
THANKS

Disconnect all peripherals from your computer & try the suggestions mentioned in User Tips: Kernel Panics.

Kernel data error occuring while installation of windows 10

i have downloaded windows 10 but during its installation my laptop's screen turn blue and shows "kernel data inpage error" and says that laptop needs a restart...and when my laptop restarts its shows no reboot device found and no operating system is found in your hardrive....then i have to press my laptops power button and shut it down and then again turn on my laptop.....three times i have tried installing windows 10 and each time this error has occured........please someone answer me that what is this kernel inpage error?....what is this reboot device?....and what should i do to fix this problem?

Hi,
While doing a fresh install of Windows server 2012 R2 on a machine I am getting error as
"Windows could not update the computer's boot configuration. Installation cannot proceed."
I have even tried to delete all the partitions and then tried to do the installation but similar error pop up after complete installation.
Even I tried to run bootrec with /fixmbr /fixboot but still no resort.
Any thoughts how to fix the issue.
Thanks in advance.
you need a fairly modern rig with lots of RAM to run Server 2012 R2
Corsair Carbide 300R with window
Corsair TX850V2 12V1 70A
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 x64 Professional
LG WH14NS40 14X Blu-Ray Writer BDXL 128GB
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M

PST is not an Outlook data file error coming while opening the Outlook

Hi,
Suddenly my outlook is showing the .pst file is not an Outlook data file error while starting. No big changes was made to the system to cause this. I had upgraded the IE version to 9 the same day. Done lots of trouble shooting but still not able fix my pst
file to work. My all mails are in that pst and there is no backup for it.
I am using Office Outlook 2007. I have already tried the following to make it work bu failed each time.
1. Tried to repair the .pst file using scanpst tool in the system, but closed due to an unexpected error at the Phase 6.
2. Successfully completed the repair using the scanpst of another Outlook 2010 system and added the pst back to my systems Outlook but it had only an Inbox folder in it which was empty.
3. Tried to repair the using other third party software's but none came successful.
Please let me know anything can be done for to make my old pst work again.
Sanjay
Avatar of Sanjay Oyitty Sanjay Oyitty

Hi,
What's the size of that .pst file?
Right click on the file and click Properties, make sure there's no
Read-only Attribute. Then we can run Scanpst.exe again to check the result again:
http://support.microsoft.com/kb/272227
Regards,
Melon Chen
TechNet Community Support

[Solved] CUPS: Unable to write print data: Input/output error

I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).

I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error in saving large value with the data input query

Hi,
I am trying to save a large value in 0Quantity using the data input query into a realtime infocube
e-g
123456789.1234
Error says too many digits.
When i try to save 8 digits before the decimal point ,no error, if it is 9digits before decimal it's thro' error.
Is there any limitation before the decimal.
i know that 0Quantity can take 17 digits including the sign.
Any suggestions.?
regards,
ram

try budgetting in thousands in stead of units? (setting on query itself)
D

Error code kernel data inpage , memory management , 0xc000021a , 0xc00000e9 on windows 8

Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD. Plzz help me to get out of this problem.
I can't even access my laptop and I am using my windows phone to post this.

Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD. Plzz help me to get out of this problem.
I can't even access my laptop and I am using my windows phone to post this.

"Exception Processing Message" error when clicking the Accessing Server Data link on the start page

When I first started the application, I click the Accessing Server Data link on the start page. I immediately got the error "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c in a dialog box titled "Windows - No Disk". I had to used Task Manager to remove the box after closing Flash Builder 4. I then tried the video tutorial on "PHP Services in Flash Builder 4". I keep receiving an error during service introspection trying to connect to the PHP class. It was the same error as the other individual "Cannot Connect to PHP Service". So I tried another tutorial and generated a sample PHP class. I moved a datagrid on to the stage, droped in the getAllItems function, and configured the return type. However, when I ran the app, I received the same error "Exception Processing Message" again. I have attached the screenshot of the error in addition to my phpinfo and log files.

"The exception process message" is definitely a issue. Is it happening consistently, if so can you file a bug at bugs.adobe.com/flex and give out your machine config details, and the error log.
With regards to generating a new php file and the introspection error that you are getting, looking at the logs it probably is two fold.
First off the name of the file and the class name should be the same, are you having employeeServices as the name of the class in employeeServices.php file.
Second, It seems prior to generating this new file, you had a syntax error at line 5.
It would be easier to figure out what the error is, if you can also attach the php file, by removing any sensitive information in that.
Hope this helps.
Thanks
-Sunil

Can no longer upload photos - ODBC data source error [was: Photoshop Album Starter Edition 3.2]

Hi everyone! Thanks in advance for any help somone can provide!
I can no longer upload photos, which sucks. I get an error message thats says : The ODBC data source returned the following error: "[Microsoft][ODBC Microsoft Access Driver] The search key was not found in any record."
I understand adobe is no longer issuing updates for this program, but is there anything I can do to salvage it? Oh I hope there is. Thanks again!

[Moved from Photoshop forum to Photoshop Album Starter Edition forum]

Kernel data input error on start up SSD Drive

Similar Messages

Maybe you are looking for