Kernel-EventTracing Failure Errors every 30 minutes

A couple months ago I started getting the following error on one of my Windows 2012 Standard servers.  The errors occur about every 30 minutes.  I've searched high and low and can't find a solution for this.  Can anyone tell me where to look?
Thanks,
Joe
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          6/11/2014 2:58:09 AM
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          NETWORK SERVICE
Computer:      Server24.internal.com
Description:
Session "" failed to start with the following error: 0xC0000022
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2014-06-11T07:58:09.331919500Z" />
    <EventRecordID>3533</EventRecordID>
    <Correlation />
    <Execution ProcessID="2840" ThreadID="4540" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>Server24.internal.com</Computer>
    <Security UserID="S-1-5-20" />
  </System>
  <EventData>
    <Data Name="SessionName">
    </Data>
    <Data Name="FileName">
    </Data>
    <Data Name="ErrorCode">3221225506</Data>
    <Data Name="LoggingMode">276824069</Data>
  </EventData>
</Event>

Hi,
When exactly do you receive this error message? You could try to stop event trace session, please see:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
http://social.technet.microsoft.com/Forums/windowsserver/en-US/02ac2078-ac0e-48d1-b3db-3f2e76319afb/session-wbadmininbuilttracing-failed-to-start-with-the-following-error-0xc0000035?forum=windowsbackup
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • I keep getting an invalid mailbox name error every 5 minutes

    I keep getting an invalid mailbox name error every five minutes. I am able to send and recieve mail, this is just very annoying.  Can anyone help?  Seem like it must be an easy fix. I was on the phone with Apple Care for over an hour and they could not figure it out.

    I have the same issue. Dont have a clue

  • "Out of Memory" error every 10 minutes, never happened before.

    Hello, let me go right to my problem.
    I'm using Photoshop CS5, AMD Athlon II X4 635 Processor - 2,90 GHz, got 4gb RAM and 32bit Windows 7. Also an ATI Radeon HD 5700
    I'm studying communications designs so I'm using Photoshop a lot. I've been using CS5 for quite a while now (like 3 months) and it never made any problems, except crashing every now and again which I didn't mind that much.
    Since today though, it always gives ma a "Out of RAM Memory" Error, when I try to save, use the brush tool, or pretty much anything else, after like 10 minutes of working on a picture. The pictures I work on aren't big, the psd file is something like 30mb and I handled pictures that were 10 times bigger in the past, without getting that error. I don't use "content aware fill" which I often heard was the cause for this and I don't have anything except Photoshop opened when I'm working on a picture. I already increased the pagefile in windows, I raised the cashe settings in Photoshop to the maximum and still, the error occurs like 10-15 minutes after I start up Photoshop and start working on my picture.
    Also, before all of that started to happen today, photoshop crashed an awful lot and I started to save more frequently, like once every 5 minutes.
    Please, can anyone try to help me find a solution to this?

    I am sorry,
    I didn't realize my post said, "Hey idiot, check your hard drive to make sure you have the room for your page file to grow."
    I would like to point out this is a user forum you came to asking other users for help with an issue you are experiancing and those of us who post try to help point you in the right direction. There really is no need to be rude or get offended from a suggestion.
    Good luck with your issue.

  • NetWeaver Developer Edition: Workspace Server Error every 2 Minutes

    Hi there,
    I installed SAP NetWeaver AS ABAP 7.02 SP6 32-bit - Developer Edition on Windows XP 32 Bit in a Virtual Machine with Virtual Box. My Host hase got 8 GB RAM and 4 x >3Ghz Processor and I gave 4GB Ram and 2 Cores to the Virtual Machine.<br>
    The Installation was ok and the Systems works. But now I began to do some exercises (Add 2 Tables and some Types) and now Windows tells me after 2 Minutes I'm logged on  Disp+Work.Exe --> an error occured. Then the SAP Workspace Server is rebooted and I can log on for the next 2 minutes. <br>
    The Error Log tells me that the WorkSpace Process Died (?) but I dont know what to do... can anybody help? This is the Log:
    <br>
    <br>
    trc file: "dev_disp", trc level: 1, release: "720"<br>
    <br>
    sysno      00<br>
    sid        NSP<br>
    systemid   560 (PC with Windows NT)<br>
    relno      7200<br>
    patchlevel 0<br>
    patchno    70<br>
    intno      20020600<br>
    make       multithreaded, Unicode, optimized<br>
    profile   
    testsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_testsap<br>
    pid        3704<br>
    Sat Nov 19 22:26:56 2011<br>
    kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)<br>
    length of sys_adm_ext is 588 bytes<br>
    SWITCH TRC-HIDE on ***<br>
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3704) [dpxxdisp.c   1268]<br>
         shared lib "dw_xml.dll" version 70 successfully loaded<br>
         shared lib "dw_xtc.dll" version 70 successfully loaded<br>
         shared lib "dw_stl.dll" version 70 successfully loaded<br>
         shared lib "dw_gui.dll" version 70 successfully loaded<br>
         shared lib "dw_mdm.dll" version 70 successfully loaded<br>
         shared lib "dw_rndrt.dll" version 70 successfully loaded<br>
         shared lib "dw_abp.dll" version 70 successfully loaded<br>
         shared lib "dw_sym.dll" version 70 successfully loaded<br>
         shared lib "dw_aci.dll" version 70 successfully loaded<br>
    rdisp/softcancel_sequence :  -> 0,5,-1<br>
    use internal message server connection to port 3900<br>
    rdisp/dynamic_wp_check : 1<br>
    rdisp/calculateLoadAverage : 1<br>
    <br>
    Sat Nov 19 22:26:57 2011<br>
    MtxInit: 30000 0 0<br>
    DpSysAdmExtInit: ABAP is active<br>
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active<br>
    DpIPCInit2: write dp-profile-values into sys_adm_ext<br>
    DpIPCInit2: start server >testsap_NSP_00                          <<br>
    DpShMCreate: sizeof(wp_adm)          20000     (2000)<br>
    DpShMCreate: sizeof(tm_adm)          4323912     (21512)<br>
    DpShMCreate: sizeof(wp_ca_adm)          32000     (64)<br>
    DpShMCreate: sizeof(appc_ca_adm)     32000     (64)<br>
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064<br>
    DpShMCreate: sizeof(comm_adm)          556064     (1104)<br>
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0<br>
    DpShMCreate: sizeof(slock_adm)          0     (96)<br>
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0<br>
    DpShMCreate: sizeof(file_adm)          0     (80)<br>
    DpShMCreate: sizeof(vmc_adm)          0     (1792)<br>
    DpShMCreate: sizeof(wall_adm)          (40056/34360/64/192)<br>
    DpShMCreate: sizeof(gw_adm)     48<br>
    DpShMCreate: sizeof(j2ee_adm)     3920<br>
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08180040, size: 5055296)<br>
    DpShMCreate: allocated sys_adm at 08180048<br>
    DpShMCreate: allocated wp_adm_list at 08182F28<br>
    DpShMCreate: allocated wp_adm at 08183020<br>
    DpShMCreate: allocated tm_adm_list at 08187E48<br>
    DpShMCreate: allocated tm_adm at 08187E70<br>
    DpShMCreate: allocated wp_ca_adm at 085A78C0<br>
    DpShMCreate: allocated appc_ca_adm at 085AF5C8<br>
    DpShMCreate: allocated comm_adm at 085B72D0<br>
    DpShMCreate: system runs without slock table<br>
    DpShMCreate: system runs without file table<br>
    DpShMCreate: allocated vmc_adm_list at 0863EEF8<br>
    DpShMCreate: system runs without vmc_adm<br>
    DpShMCreate: allocated gw_adm at 0863EF50<br>
    DpShMCreate: allocated j2ee_adm at 0863EF88<br>
    DpShMCreate: allocated ca_info at 0863FEE0<br>
    DpShMCreate: allocated wall_adm at 0863FEF8<br>
    DpCommAttachTable: attached comm table (header=085B72D0/ft=085B72D8)<br>
    DpSysAdmIntInit: initialize sys_adm<br>
    rdisp/test_roll : roll strategy is DP_NORMAL_ROLL<br>
    dia token check not active (3 token)<br>
    MBUF state OFF<br>
    DpCommInitTable: init table for 500 entries<br>
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm<br>
    rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80<br>
    EmInit: MmSetImplementation( 2 ).<br>
    MM global diagnostic options set: 0<br>
    <ES> client 0 initializing ....<br>
    <ES> InitFreeList<br>
    <ES> block size is 1024 kByte.<br>
    Using implementation view<br>
    <EsNT> Using memory model view.<br>
    <EsNT> Memory Reset disabled as NT default<br>
    <ES> 1023 blocks reserved for free list.<br>
    ES initialized.<br>
    DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE<br>
    MPI: dynamic quotas disabled.<br>
    MPI init: pipes=4000 buffers=159 reserved=47 quota=10% <br>
    <br>
    Sat Nov 19 22:26:58 2011<br>
    rdisp/http_min_wait_dia_wp : 1 -> 1<br>
    ***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c   1654]<br>
    ***LOG Q0K=> DpMsAttach, mscon ( testsap) [dpxxdisp.c   12221]<br>
    MBUF state LOADING<br>
    DpStartStopMsg: send start message (myname is >testsap_NSP_00                          <)<br>
    DpStartStopMsg: start msg sent<br>
    CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.<br>
    DpMBufHwIdSet: set Hardware-ID<br>
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]<br>
    MBUF state ACTIVE<br>
    DpWpBlksLow: max wp blocks in queue is 400 (80 %)<br>
    MBUF component UP<br>
    DpMsgProcess: 1 server in MBUF<br>
    DpAppcBlksLow: max appc blocks in queue is 250 (50 %)<br>
    <br>
    Sat Nov 19 22:27:59 2011<br>
    DpModState: change server state from STARTING to ACTIVE<br>
    <br>
    Sat Nov 19 22:33:38 2011<br>
    ERROR => DpHdlDeadWp: W0 (pid 2012) died (severity=0, status=0) [dpxxwp.c     1522]<br>
    Edited by: frankie2209 on Nov 19, 2011 10:59 PM
    <br><br>
    <b>C:\usr\sap\NSP\DVEBMGS00\work --> file dev_wi shows an error:</b>
    <br><br>
    M Sat Nov 19 22:28:10 2011<br>
    M  *** ERROR => alert/MONI_SEGM_SIZE not set. Monitoring switched off. [alxxmoni.c   10094]<br>
    M  {root-id=080027A0577D1ED184DEABD3CD8E66BD}_{conn-id=00000000000000000000000000000000}_0<br>
    <br>
    M  <br>
    M Sat Nov 19 22:28:11 2011<br>
    M  ThrtGwMonTrustedIpAddr: 1. 10.0.2.15<br>
    M  ThrtGwMonTrustedIpAddr: 2. 10.0.2.15<br>
    M  ThrtGwMonTrustedIpAddr: 3. 10.0.2.15<br>
    A  <br>
    A Sat Nov 19 22:31:21 2011<br>
    A  GENER starting remote generation: SAPLSED6 (requested by W0).<br>
    S  <br>
    S Sat Nov 19 22:33:18 2011<br>
    S  found spool memory service RSPO-ACTIONS at 11B99D88<br>
    M  <br>
    M Sat Nov 19 22:37:18 2011<br>
    M  ThrtGwMonTrustedIpAddr: 1. 10.0.2.15<br>
    M  ThrtGwMonTrustedIpAddr: 2. 10.0.2.15<br>
    M  ThrtGwMonTrustedIpAddr: 3. 10.0.2.15<br>
    M  <br>
    M Sat Nov 19 22:47:18 2011<br>
    M  ThrtGwMonTrustedIpAddr: 1. 10.0.2.15<br>
    M  ThrtGwMonTrustedIpAddr: 2. 10.0.2.15<br>
    M  ThrtGwMonTrustedIpAddr: 3. 10.0.2.15<br>
    M  <br>
    M Sat Nov 19 22:56:51 2011<br>
    M  in_ThErrHandle: 1<br>
    M  ThIErrHandle: new stat of W1 is WP_SHUTDOWN    <br>
    M  ThIErrHandle: I'm during shutdown<br>
    M  PfStatDisconnect: disconnect statistics<br>
    M  ThIErrHandle: entering ThSetStatError<br>
    C  CANCEL rejected, because there is no SQL statement active<br>
    B  db_sqlbreak() = 1<br>
    M  ThCallDbBreak: no sql statement active<br>
    M  ThIErrHandle: don't try rollback again<br>
    M  ThShutDownServer: shutdown server<br>
    M  ThCallHooks: call hook >Shutdown PXA< for event BEFORE_SHUTDOWN<br>
    A  Saving PXA statistics.<br>
    A  540 programs loaded.<br>
    A  file pxanew opened.<br>
    A  540 entries written.<br>
    M  ThCallHooks: hook >Shutdown PXA< o.k.<br>
    M  PfStatIndInit: Initializing Index-Record <br>
    M  PfWriteIntoFile: copied shared buf (0 bytes) to local buf<br>
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)<br>
    M  Entering ThReadDetachMode<br>
    M  call ThrShutDown (1)...<br>
    B  dbtbxbuf: Saving TBX statistics:<br>
    B  dbtbxbuf: 40 object entries written.<br>
    B  Disconnecting from ALL connections:<br>
    B  Wp  Hdl ConName          ConId     ConState     TX  BC  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost           <br>Program                                
    B  001 000 R/3              000000000 INACTIVE     NO  NO  NO  YES NO  NO  000 255 255 20111119 222712 <br>testsap                                                 
    C  Disconnecting from connection 0 ...<br>
    C  Now I'm disconnected from MaxDB<br>
    B  Disconnected from connection 0<br>
    B  statistics db_con_commit (com_total=97, com_tx=19)<br>
    B  statistics db_con_rollback (roll_total=0, roll_tx=0)<br>
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 1 3304) [dpnttool.c   339]<br>
    <br>
    <br>
    Edited by: frankie2209 on Nov 19, 2011 11:18 PM
    <br><br>
    <b>Now I saw in syslog in SAPMMC that when I start the ApplicationServer "NSP" ive got an Error:</b>
    "Communications data: Service initialization failed" (Process Type RD, PID 03356 , Message ID S10<br> But message_server.exe and disp+work.exe are running green and i can log on into sap. and then after 1 minute the explaned error occurs.(WorkspaceProcess is restarted and sapsession breaks down - i have to log on again)
    Edited by: frankie2209 on Nov 19, 2011 11:45 PM

    Please check the value of  the parameter PHYS_MEMSIZE in the file <Drive>:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_testsap . Set the value to 2048M. Also set the page file size to 10GB. Ensure you have space on disk to allocate space for paging.

  • Bootpd throwing errors every 10 minutes

    Around every 10 mintues (sometimes longer sometimes shorter) bootpd throws a bunch of errors into system.log
    They all look exactly like this:
    May 25 16:55:41 nppiart002 bootpd[17842]: interface en0: ip 10.10.10.7 mask 255.255.254.0
    May 25 16:55:41 nppiart002 bootpd[17842]: interface en1: ip 10.10.20.7 mask 255.255.254.0
    May 25 16:55:41 nppiart002 bootpd[17842]: server name nppiart002.****.com
    May 25 16:55:41 nppiart002 bootpd[17842]: subnets init using domain . failed:
    May 25 16:55:41 nppiart002 bootpd[17842]: bsdpd: re-reading configuration
    May 25 16:55:41 nppiart002 bootpd[17842]: bsdpd: shadow file size will be set to 48 megabytes
    May 25 16:55:41 nppiart002 bootpd[17842]: bsdpd: age time 00:15:00
    The stars in the domainname were added by me.
    Can someone tell me why this keeps happening?

    Have you googled your error message?...
    http://www.google.com/search?client=safari&rls=en&q=bootpdsubnets+init+using+domain+.failed&ie=UTF-8&oe=UTF-8
    -david

  • Event 4999 - Watson report about to be sent for process id: 27244 on Mailbox Server every five minutes

    On one of my DAG enabled Exchange 2013 mailbox servers, I get this error in event viewer every five minutes:
    Log Name:      Application
    Source:        MSExchange Common
    Date:          6/25/2014 10:49:46 AM
    Event ID:      4999
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:    mailboxserver  
    Description:
    Watson report about to be sent for process id: 27244, with parameters: E12IIS, c-RTL-AMD64, 15.00.0913.022, M.E.RpcClientAccess.Service, unknown, M.E.R.S.U.DatabaseInfo..ctor, System.NullReferenceException, aba8, unknown.
    ErrorReportingEnabled: True 
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Common" />
        <EventID Qualifiers="16388">4999</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-25T17:49:46.000000000Z" />
        <EventRecordID>687360</EventRecordID>
        <Channel>Application</Channel>
        <Computer>mailboxserver</Computer>
        <Security />
      </System>
      <EventData>
        <Data>27244</Data>
        <Data>E12IIS</Data>
        <Data>c-RTL-AMD64</Data>
        <Data>15.00.0913.022</Data>
        <Data>M.E.RpcClientAccess.Service</Data>
        <Data>unknown</Data>
        <Data>M.E.R.S.U.DatabaseInfo..ctor</Data>
        <Data>System.NullReferenceException</Data>
        <Data>aba8</Data>
        <Data>unknown</Data>
        <Data>True</Data>
        <Data>False</Data>
        <Data>Microsoft.Exchange.RpcClientAccess.Service</Data>
        <Data>
        </Data>
      </EventData>
    </Event>
    Everything is working ok, but I'm concerning that I"m seeing this.  
    ST

    Amit,
    I don't see the same type of 4999 error every five minutes anymore.  It only get the 4999 error about 3 times a day.  I get one with the same ID and other completely different process ID.  The error is below:
    Log Name:      Application
    Source:        MSExchange Common
    Date:          7/2/2014 6:01:36 AM
    Event ID:      4999
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:     computer
    Description:
    Watson report about to be sent for process id: 13152, with parameters: E12, c-RTL-AMD64, 15.00.0913.022, w3wp#MSExchangeOWAAppPool, M.E.Data.ApplicationLogic, M.E.D.S.GccUtils.GetClientIPEndpointsFromHttpRequest, System.NullReferenceException, 868, 15.00.0913.017.
    ErrorReportingEnabled: True 
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Common" />
        <EventID Qualifiers="16388">4999</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-02T13:01:36.000000000Z" />
        <EventRecordID>825358</EventRecordID>
        <Channel>Application</Channel>
        <Computer>computer</Computer>
        <Security />
      </System>
      <EventData>
        <Data>13152</Data>
        <Data>E12</Data>
        <Data>c-RTL-AMD64</Data>
        <Data>15.00.0913.022</Data>
        <Data>w3wp#MSExchangeOWAAppPool</Data>
        <Data>M.E.Data.ApplicationLogic</Data>
        <Data>M.E.D.S.GccUtils.GetClientIPEndpointsFromHttpRequest</Data>
        <Data>System.NullReferenceException</Data>
        <Data>868</Data>
        <Data>15.00.0913.017</Data>
        <Data>True</Data>
        <Data>False</Data>
        <Data>w3wp#MSExchangeOWAAppPool</Data>
        <Data>
        </Data>
      </EventData>
    </Event>
    Going to keep an eye on it, but its not causing any issues. 
    ST

  • Audit failure every 2 minutes on a W2K8 standalone Server in a Workgroup EventID 4625

    Hello
    By chance I discovered that every 2 minutes there is a login failure on my standalone (Workgroup) W2K8 R2 Server.
    The administrator is disabled (login errors also appear when administrator user is enabled).
    Could not find any tasks that are running with administrator credentials. It seems to me that it must be from the same machine, as the source IP Address is 127.0.0.1.
    Does anyone have an idea?
    Here the log:
    An account failed to log on.
    Subject:
        Security ID:        SYSTEM
        Account Name:        NS2308064$
        Account Domain:        WORKGROUP
        Logon ID:        0x3e7
    Logon Type:            2
    Account For Which Logon Failed:
        Security ID:        NULL SID
        Account Name:        Administrator
        Account Domain:        NS2308064
    Failure Information:
        Failure Reason:        Unknown user name or bad password.
        Status:            0xc000006d
        Sub Status:        0xc000006a
    Process Information:
        Caller Process ID:    0x20c
        Caller Process Name:    C:\Windows\System32\winlogon.exe
    Network Information:
        Workstation Name:    NS2308064
        Source Network Address:    127.0.0.1
        Source Port:        0
    Detailed Authentication Information:
        Logon Process:        User32
        Authentication Package:    Negotiate
        Transited Services:    -
        Package Name (NTLM only):    -
        Key Length:        0
    Thanks & Regards
    Chris

    Hi,
    This a forum for windows 7.
    Please focus on one post to get better solutions.
    http://social.technet.microsoft.com/Forums/en-US/5019d759-b497-44e4-a82a-4fefd4e367c6/audit-failure-every-2-minutes-on-a-w2k8-standalone-server-in-a-workgroup-eventid-4625?forum=winserversecurity
    Thanks for your understanding!
    Regards,
    Ada Liu
    TechNet Community Support

  • Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

    2 node active passive, 2008 failover cluster.  I keep getting the following error events:
    The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
    Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
    However my quorum disk is online from what I can see.   One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
    I also noticed these errors are being entered every 15 minutes exactly.
    I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
    Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2?  Really?
    http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
    Any thoughts

    support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
    The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
    Check for below logs in the cluster logs:
    00000d84.00000f58::2014/11/18-19:04:06.805 INFO  [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
    00000d84.00000f58::2014/11/18-19:04:06.805 INFO  [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
    00000d84.00000ef8::2014/11/18-19:04:06.805 INFO  [QUORUM] Node 1: quorum is not owned by anyone
    Try reforming the cluster, it will resolve the issue.
    Change the quorum model to Node majority and back to node and disk majority.
    Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
    Thanks
    Himanshu Swarnkar (MSFT)

  • FMLE Unexpected Error encountered in encoding process every 2 minutes

    Hi,
    We are wondering if anyone has advice as to what could be causing the following problem.
    We are having an issue where by we are getting an Unexpected error ever 2 minutes.
    We are running FMLE 3.2 on a Mac Pro server with a Blackmagic Intensity Pro Capture card
    Wed Jan 11 2012 17:49:49 : Session Started
    Wed Jan 11 2012 17:49:49 : Video Encoding Started
    Wed Jan 11 2012 17:49:49 : Audio Encoding Started
    Wed Jan 11 2012 17:51:49 : Unexpected error encountered in encoding process.
    Wed Jan 11 2012 17:51:49 : Audio Encoding Stopped
    Wed Jan 11 2012 17:51:49 : Video Encoding Stopped
    Wed Jan 11 2012 17:51:49 : Session Stopped
    Wed Jan 11 2012 17:51:51 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:51:51 : Primary - Network Status: NetConnection.Connect.Closed status
    Wed Jan 11 2012 17:51:51 : Primary - Disconnected
    Wed Jan 11 2012 17:51:51 : Primary - Connected to FMS/3,5,7,7009
    Wed Jan 11 2012 17:51:51 : Primary - Stream[1_o9kj1pu9_1@39123] Status: Success
    Wed Jan 11 2012 17:51:51 : Primary - Network Command: onFCPublish
    Wed Jan 11 2012 17:51:51 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
    Wed Jan 11 2012 17:51:51 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:51:51 : Backup - Network Status: NetConnection.Connect.Closed status
    Wed Jan 11 2012 17:51:51 : Backup - Disconnected
    Wed Jan 11 2012 17:51:51 : Backup - Connected to FMS/3,5,7,7009
    Wed Jan 11 2012 17:51:51 : Backup - Stream[1_o9kj1pu9_1@39123] Status: Success
    Wed Jan 11 2012 17:51:51 : Backup - Network Command: onFCPublish
    Wed Jan 11 2012 17:51:51 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
    Wed Jan 11 2012 17:51:51 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
    Wed Jan 11 2012 17:51:51 : Renaming existing file from /Users/harvardiop/Movies/bobsburgers.f4v to /Users/harvardiop/Movies/bobsburgers.4.f4v
    Wed Jan 11 2012 17:51:51 : Session Started
    Wed Jan 11 2012 17:51:51 : Video Encoding Started
    Wed Jan 11 2012 17:51:52 : Audio Encoding Started
    Wed Jan 11 2012 17:53:51 : Unexpected error encountered in encoding process.
    Wed Jan 11 2012 17:53:52 : Audio Encoding Stopped
    Wed Jan 11 2012 17:53:52 : Video Encoding Stopped
    Wed Jan 11 2012 17:53:52 : Session Stopped
    Wed Jan 11 2012 17:53:53 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:53:53 : Primary - Network Status: NetConnection.Connect.Closed status
    Wed Jan 11 2012 17:53:53 : Primary - Disconnected
    Wed Jan 11 2012 17:53:53 : Primary - Connected to FMS/3,5,7,7009
    Wed Jan 11 2012 17:53:53 : Primary - Stream[1_o9kj1pu9_1@39123] Status: Success
    Wed Jan 11 2012 17:53:53 : Primary - Network Command: onFCPublish
    Wed Jan 11 2012 17:53:53 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
    Wed Jan 11 2012 17:53:53 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:53:53 : Backup - Network Status: NetConnection.Connect.Closed status
    Wed Jan 11 2012 17:53:53 : Backup - Disconnected
    Wed Jan 11 2012 17:53:53 : Backup - Connected to FMS/3,5,7,7009
    Wed Jan 11 2012 17:53:54 : Backup - Stream[1_o9kj1pu9_1@39123] Status: Success
    Wed Jan 11 2012 17:53:54 : Backup - Network Command: onFCPublish
    Wed Jan 11 2012 17:53:54 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
    Wed Jan 11 2012 17:53:54 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
    Wed Jan 11 2012 17:53:54 : Renaming existing file from /Users/harvardiop/Movies/bobsburgers.f4v to /Users/harvardiop/Movies/bobsburgers.5.f4v
    Wed Jan 11 2012 17:53:54 : Session Started
    Wed Jan 11 2012 17:53:54 : Video Encoding Started
    Wed Jan 11 2012 17:53:54 : Audio Encoding Started
    Wed Jan 11 2012 17:55:54 : Unexpected error encountered in encoding process.
    Wed Jan 11 2012 17:55:54 : Audio Encoding Stopped
    Wed Jan 11 2012 17:55:54 : Video Encoding Stopped
    Wed Jan 11 2012 17:55:54 : Session Stopped
    Wed Jan 11 2012 17:55:55 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:55:55 : Primary - Network Status: NetConnection.Connect.Closed status
    Wed Jan 11 2012 17:55:55 : Primary - Disconnected
    Wed Jan 11 2012 17:55:55 : Primary - Connected to FMS/3,5,7,7009
    Wed Jan 11 2012 17:55:55 : Primary - Stream[1_o9kj1pu9_1@39123] Status: Success
    Wed Jan 11 2012 17:55:55 : Primary - Network Command: onFCPublish
    Wed Jan 11 2012 17:55:56 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
    Wed Jan 11 2012 17:55:56 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:55:56 : Backup - Network Status: NetConnection.Connect.Closed status
    Wed Jan 11 2012 17:55:56 : Backup - Disconnected
    Wed Jan 11 2012 17:55:56 : Backup - Connected to FMS/3,5,7,7009
    Wed Jan 11 2012 17:55:56 : Backup - Stream[1_o9kj1pu9_1@39123] Status: Success
    Wed Jan 11 2012 17:55:56 : Backup - Network Command: onFCPublish
    Wed Jan 11 2012 17:55:56 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
    Wed Jan 11 2012 17:55:56 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
    Wed Jan 11 2012 17:55:56 : Renaming existing file from /Users/harvardiop/Movies/bobsburgers.f4v to /Users/harvardiop/Movies/bobsburgers.6.f4v
    Wed Jan 11 2012 17:55:56 : Session Started
    Wed Jan 11 2012 17:55:56 : Video Encoding Started
    Wed Jan 11 2012 17:55:56 : Audio Encoding Started
    Wed Jan 11 2012 17:57:39 : Audio Encoding Stopped
    Wed Jan 11 2012 17:57:39 : Video Encoding Stopped
    Wed Jan 11 2012 17:57:39 : Session Stopped
    Wed Jan 11 2012 17:57:40 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
    Wed Jan 11 2012 17:57:40 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:57:40 : Primary - Network Command: onFCUnpublish
    Wed Jan 11 2012 17:57:41 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
    Wed Jan 11 2012 17:57:41 :
    The following is our FMLE Profile XML
    <?xml version="1.0" encoding="UTF-16"?>
    <flashmedialiveencoder_profile>
        <preset>
            <name>Custom</name>
            <description></description>
        </preset>
        <capture>
            <video>
            <device>Intensity NTSC/PAL</device>
            <frame_rate>24.00</frame_rate>
            <size>
                <width>720</width>
                <height>480</height>
            </size>
            </video>
            <audio>
            <device>Blackmagic Audio</device>
            <sample_rate>22050</sample_rate>
            <channels>2</channels>
            <input_volume>75</input_volume>
            </audio>
        </capture>
        <encode>
            <video>
            <format>H.264</format>
            <datarate>500;</datarate>
            <outputsize>640x426;</outputsize>
            <advanced>
                <profile>Baseline</profile>
                <level>3.1</level>
                <keyframe_frequency>5 Seconds</keyframe_frequency>
            </advanced>
            <autoadjust>
                <enable>false</enable>
                <maxbuffersize>1</maxbuffersize>
                <dropframes>
                <enable>false</enable>
                </dropframes>
                <degradequality>
                <enable>true</enable>
                <minvideobitrate></minvideobitrate>
                <preservepfq>false</preservepfq>
                </degradequality>
            </autoadjust>
            </video>
            <audio>
            <format>MP3</format>
            <datarate>48</datarate>
            </audio>
        </encode>
        <restartinterval>
            <days></days>
            <hours></hours>
            <minutes></minutes>
        </restartinterval>
        <reconnectinterval>
            <attempts></attempts>
            <interval></interval>
        </reconnectinterval>
        <output>
            <rtmp>
            <url>rtmp://p.ep39123.i.akamaientrypoint.net/EntryPoint</url>
            <backup_url>rtmp://b.ep39123.i.akamaientrypoint.net/EntryPoint</backup_url>
            <stream>1_o9kj1pu9_%i@39123</stream>
            </rtmp>
            <file>
            <limitbysize>
                <enable>false</enable>
                <size>10</size>
            </limitbysize>
            <limitbyduration>
                <enable>false</enable>
                <hours>1</hours>
                <minutes>0</minutes>
            </limitbyduration>
            <path>bobsburgers.f4v</path>
            </file>
        </output>
        <metadata>
            <entry>
            <key>author</key>
            <value></value>
            </entry>
            <entry>
            <key>copyright</key>
            <value></value>
            </entry>
            <entry>
            <key>description</key>
            <value></value>
            </entry>
            <entry>
            <key>keywords</key>
            <value></value>
            </entry>
            <entry>
            <key>rating</key>
            <value></value>
            </entry>
            <entry>
            <key>title</key>
            <value></value>
            </entry>
        </metadata>
        <preview>
            <video>
            <input>
                <zoom>75%</zoom>
            </input>
            <output>
                <zoom>75%</zoom>
            </output>
            </video>
            <audio></audio>
        </preview>
        <log>
            <level>100</level>
            <directory>/Users/harvardiop/Movies</directory>
        </log>
    </flashmedialiveencoder_profile>
    Thank you,

    Hi. I am currently having the same problems, only i do believe my settings are correct. However the error appears every thirty seconds. What am i doing wrong?
    <?xml version="1.0" encoding="UTF-16"?>
    <flashmedialiveencoder_profile>
    <preset>
    <name>Custom</name>
    <description></description>
    </preset>
    <capture>
    <video>
    <device>Blackmagic HD 720p 50 - 10 Bit</device>
    <frame_rate>25.00</frame_rate>
    <size>
    <width>1280</width>
    <height>720</height>
    </size>
    </video>
    <audio>
    <device>Line In</device>
    <sample_rate>44100</sample_rate>
    <channels>2</channels>
    <input_volume>75</input_volume>
    </audio>
    </capture>
    <process>
    <video>
    <crop>
    <left>15</left>
    <top>15</top>
    <right>15</right>
    <bottom>15</bottom>
    </crop>
    </video>
    </process>
    <encode>
    <video>
    <format>H.264</format>
    <datarate>2048;</datarate>
    <outputsize>640x360;</outputsize>
    <advanced>
    <profile>Baseline</profile>
    <level>4.1</level>
    <keyframe_frequency>8 Seconds</keyframe_frequency>
    </advanced>
    <autoadjust>
    <enable>false</enable>
    <maxbuffersize>1</maxbuffersize>
    <dropframes>
    <enable>false</enable>
    </dropframes>
    <degradequality>
    <enable>true</enable>
    <minvideobitrate></minvideobitrate>
    <preservepfq>false</preservepfq>
    </degradequality>
    </autoadjust>
    </video>
    <audio>
    <format>AAC</format>
    <datarate>128</datarate>
    </audio>
    </encode>
    <restartinterval>
    <days></days>
    <hours></hours>
    <minutes></minutes>
    </restartinterval>
    <reconnectinterval>
    <attempts></attempts>
    <interval></interval>
    </reconnectinterval>
    <output>
    <rtmp>
    <url>rtmp://p.xxxxxxx.i.akamaientrypoint.net/EntryPoint</url>
    <backup_url>rtmp://b.xxxxxx.i.akamaientrypoint.net/EntryPoint</backup_url>
    <stream>xxxxx</stream>
    </rtmp>
    </output>
    <metadata>
    <entry>
    <key>author</key>
    <value></value>
    </entry>
    <entry>
    <key>copyright</key>
    <value></value>
    </entry>
    <entry>
    <key>description</key>
    <value></value>
    </entry>
    <entry>
    <key>keywords</key>
    <value></value>
    </entry>
    <entry>
    <key>rating</key>
    <value></value>
    </entry>
    <entry>
    <key>title</key>
    <value></value>
    </entry>
    </metadata>
    <preview>
    <video>
    <input>
    <zoom>25%</zoom>
    </input>
    <output>
    <zoom>50%</zoom>
    </output>
    </video>
    <audio></audio>
    </preview>
    <log>
    <level>100</level>
    <directory>/Users/xxx/Movies</directory>
    </log>
    </flashmedialiveencoder_profile>

  • IE 11: Widget script error every 10-20 minutes and every new tab opened

    So as of recently, Internet Explorer has started popping up these errors every 10-20 minutes and every time I would open a New tab. I've tried disabling script troubleshooting in the Tools section but I still get them. I haven't downloaded or edited anything
    in the past couple of days before I encountered this problem.Any help is greatly appreciated.
    Here's the error I keep getting:
    Line: 12
    Char: 13
    Error: No access
    Code: 0
    URL: http://widgets.xrosview.com/widgets/1.4.2/shared/windows/hyperpop/background.htm?v=1&name=mpvFloatingWind39160076644830740&id=ivdmpvep&url=http://widgets.xrosview.com/widgets/entryPoints/ivd.js?v=2&hrdId=008edbb000000000000000ffc0f6e141&vrsn=1%2E8%2E20%2E0&smplGrp=none&afltId=5&tlbrid=base&age=285&instlDate=15878&toolbarLoaded=false&loader=pagePlatformLoader

    Hi Chillom,
    Please also check the Event Viewer to see whether there're some more information recorded.
    Regarding to the Widget, it might be an application installed in your system or for your web, I'm not sure what exactly it is referring to in your system, so have you ever installed any software or IE add-ons mainly related with "Widget"? I suggest
    you test IE in no add-ons mode, run %ProgramFiles%\Internet Explorer\iexplore.exe -extoff
    Meanwhile, run a security scan.
    Or test this issue in clean boot mode, if it disappears in this mode, then we can narrow down to find the culprit
    http://support.microsoft.com/kb/929135/en-us
    Yolanda Zhu
    TechNet Community Support

  • A Kernel Task runs at 700% processor power between every 5 minutes to 1 hour. I have tried Onyx, zapped the PRAM and reinstalled Snow Leopard.

    A Kernel Task runs at 700% processor power between every 5 minutes to 1 hour, slowing down everything I do. I have tried Onyx, zapped the PRAM and reinstalled Snow Leopard. Any suggestions?

    pan did you solve it? i have the same issue. i see people writing 'oh no kernel on 200-300%... well my kernel runs up to 600-800% anytime. i'm running os 10.6.8, i have 2010 2GHz intel core i7, with 16gb ram and... go figure. even ssd drive, thinking i have the fastest possible hardware installed to ease up on any task i'm about to do. but when it gets slow then safari just 'quits' on me, mouse cursor gets so sloppy slow (that's how i always realize that kernel is knocking on the door again). but... i do use screen, 24 apple LED and i have the laptop still open, so dual screen. i think it happens way less when the laptop is closed and i use just the big screen... but i refuse, this is not a calculator, its god **** macbook pro, so if one extra screen kills my workflow then i have to... idont know what. help apple, wth! and your safari ***** so much it's not even nice, it's so buggy but i'm the crazy one, because i keep using it. that's all

  • BPEL process on error retrying self after every 5 minutes (no fault policy)

    Hi All
    We are facing very strange issue in one of our BPEL processes (we are using Oracle SOA Suite 11.1.1.3 on linux with 2 soa servers in cluster). The composite consists of a web service binding followed by a mediator which routes to three different BPEL processes (operational routing). This is all one way.
    Inside the BPEL we are throwing a bpel rollback fault in the catch all to roll back any pending database changes. As soon as the error comes, In the composite diagram i can see multiple BPEL instances under the mediator and they keep on coming after every 5 minutes (basically i see two BPEL instances with a gap of one second and this pair keeps on repeating every 5 minutes)
    Also we have a send email in the catch all and the email we get has a different composite id in every mail. However in the em i can see only one composite id (the first one when the error came) with multiple BPEL diagrams in it.
    We are not sure what is causing the error?
    1) Is it the one way mediator routing to 3 BPEL processes as per the operation invoked?
    2) Is there something wrong with clustering?
    3) Is there a problem with version 11.1.1.3?
    Please help as we are struck and not able to move to INT.
    Thanks and Regards
    Amit Sachdev

    Hi Anuj
    Thanks for the reply again. Using the below property seems to work, but it is making the call sync (i get an empty fault in SOAP-UI) and my java client also waits for the response.
    <component name="abcd">
    <implementation.bpel src="abcd.bpel"/>
    <property name="bpel.config.oneWayDeliveryPolicy" many="false" type="xs:string">sync</property>
    <property name="bpel.config.transaction" many="false" type="xs:string">required</property>
    </component>
    As i told that this is a long running process (could easily take 3-4 hours), i cant afford to wait for this (should be fire and forget).
    1) Is there a way, i can make it fire and forget and also stop the recovery using the properties you just told?
    2) If there is no way out, i can remove the throw rollback fault in catch all, but i want the composite instance to be shown as red (i will take care of the rollbacks in db in code). I tried using the terminate activity but that doesn't make it red (like it used to be in 10g). Is there a way to mark the instance as red without throwing an uncaught fault?
    Please let me know. Thanks
    Also regarding the patch, if we apply it, will it still recover the BPEL instance? I mean the BPEL is throwing a rollback fault and is being exactly retried 50 times with a gap of 5 minutes (default settings in em console, not touched at all). Every time it runs it would throw the same fault again (as it reads and deletes a control file, so in successive runs that control file will not be there) leading to rollback error being thrown from catch all during automatic retry.

  • Microsoft-Windows-Kernel-EventTracing Error 2 happens twice at boot EX2013CU7

    Not sure what it is.  The server is running Server 2012 R2 and it is a VM.  It has exchange and associated necessary features, roles, and prerequisites and nothing else installed.  I have uninstalled and reinstalled Exchange 2013 CU7 3 times
    and each time this error has been present.  It happens twice at boot and seems to cause no problems.
    Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
    Source:        Microsoft-Windows-Kernel-EventTracing
    Date:          12/23/2014 10:06:53 AM
    Event ID:      2
    Task Category: Session
    Level:         Error
    Keywords:      Session
    User:          SYSTEM
    Computer:      myserver.mydomain.local
    Description:
    Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
        <EventID>2</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>2</Task>
        <Opcode>12</Opcode>
        <Keywords>0x8000000000000010</Keywords>
        <TimeCreated SystemTime="2014-12-23T17:06:53.273839900Z" />
        <EventRecordID>2</EventRecordID>
        <Correlation />
        <Execution ProcessID="3640" ThreadID="10016" />
        <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
        <Computer>Valis.PBJFS.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="SessionName">FastDocTracingSession</Data>
        <Data Name="FileName">
        </Data>
        <Data Name="ErrorCode">3221225525</Data>
        <Data Name="LoggingMode">9</Data>
      </EventData>
    </Event>

    Hi,
    This Event can be ignored. To prevent this Event prompt, please follow steps below:
    1. Set the MetricsSelfSelectionSelected value in the registry to
    2.
    2. Restart the
    Windows Azure Telemetry Service service.
    3. Stop the
    WindowsAzure-GuestAgent-Metrics event trace session.
    More details, please refer following blog:
    Event ID 2: Session "WindowsAzure-GuestAgent-Metrics" failed to start with the following error: 0xC0000035
    http://blogs.msdn.com/b/mast/archive/2014/07/09/event-id-2-session-quot-windowsazure-guestagent-metrics-quot-failed-to-start-with-the-following-error-0xc0000035.aspx
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Large Number of Lync Conference Session Failures Every 3 Minutes

    I'm wondering if anyone has ever seen this issue before.  It's new to me.
    A client of mine is experiencing extremely high conferencing session failures in Lync.  Once looking into the conferences in question, it looks as though one specific users conferences are in question.  A conference session for this users Lync
    meetings are attempting to be joined EVERY 3 minutes, 24 Hours a day with a Response Code of 486 and a Diagnostic Code of 34007.  Here is a ScreenShot of 10 Minutes worth of these attempts:
    This user is not experiencing any problems in joining meetings on his own and he is the only user listed as having unexpected conference failures. 
    My thought was to restart the AV Conferencing Service or reboot the Front End Servers but wanted to run this past some other first. 
    Any thoughts?
    John K. Boslooper | Lync Technical Specialist | MCITP
    Project Leadership Associates
    2000 Town Center, Suite 1900, Southfield, MI 48075
    Phone: 312.448.2269 | Fax: 435.304.3335
    www.projectleadership.net

    UPDATE:
    It seems as though it was a hung up process with the AVCMU Agent on one of the Front-End servers.  A simple reboot over the weekend took care of the problem.
    John K. Boslooper | Lync Technical Specialist | Project Leadership Associates Phone: 312.448.2269 | www.projectleadership.net

  • After installation of the latest i-tunes update on my I-mac I receive every five minutes an error -50 message!

    After the lates i-tunes update on my MacBook Pro I recieve almost every five minutes an error Message (-50). The message rlates to an unknown error ocurred in connection with a proposed i-tunes request. However, there has been no request posted.

    Hello werner1966,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    iTunes Store: "Error (-50)" when downloading purchased content
    http://support.apple.com/kb/ts1583
    Have a nice day,
    Mario

Maybe you are looking for