Kernel-headers and kernel26-beyond out of sync?

Hello,
I am using kernel26-beyond (currently at 2.6.19), but every time a vanilla kernel gets upgraded, I get kernel-headers upgraded also (currently at 2.6.20). I wonder if wouldn't be better if there was different kernel-headers-beyond package for kernel26-beyond kernels? I am just afraid I could have problems while compiling some programs while vanilla and beyond variants of kernel are out of sync.
I imagine this is valid for other variants of kernels as well.
Another solution would be to release all the kernel variants at the same time, but I don;'t know if it would be possible.
Regards,
miko

mykey wrote:Just to get this straight - only when glibc is compiled against new kernel-headers (e.g. 2.6.21) it is safe to upgrade kernel-headers (to 2.6.21) even if the used kernel version is still 2.6.19 ?
yes, and glibc will be recompiled when the kernel headers are updated, so you're able to upgrade safely.
You can use any kernel you like (within reason), it doesnt have to match the kernel-headers version.

Similar Messages

Photo Booth Audio and Video are out of sync?

Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.

I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
Just open Quicktime Player and under the File menu you'll see "Record New Movie."
The downward slide continues...

Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

Hello,
I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
Any suggestions would be great.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

N95 Recorded Video: Video and audio is out of sync

Audio and video is out of sync when I play videos recorded with N95 on my PC. If have used different PC applications to play the video, but all exhibit the same problem.
In the beginning of at video it seems that the audio is about 400milliseconds ahead of the video - you hear the sound first. The different in audio and video is not constant. In a long video (30-50minutes) it is quite unpretictable how video and audio is out of sync in the end.
To experience the problem yourself record a long video sequence with a N95.
1 .Record something where it is easy to see if video and audio is in sync.
2. Transfer the recording to a PC.
3. Play the recording using VLC (www.videolan.org)
Another way to experience the problem is to convert the recording to AVI format at play it in MediaPlayer or WindowsMovieMaker. To convert a N95 video recording to AVI format use Mp4Cam2Avi.
http://sourceforge.net/projects/mp4cam2avi/
The video recording settings I use on my N95 are:
Best Quality
No Video Stablisation
Firmware version 21.0.0.16.
I think the video quality of N95 recordings is quite good, so I would really like to be able to view and edit the recorded vidoes on my PC.

28-Mar-2008 09:50 PM
el_loco wrote:
I've seen this issue, but it's not so critical for me. It doesn't happen 100% of the time or in most situations it's very hard to see.
You can edit videos on your PC, just converting them to AVI then using any Video Editor on the PC.
Yes while editing separate the audio channel from the clip and reinsert at the begining of the clip. This will minimise sync issues.To get accurate sync increase the timeline so that you are able to the see audio squiggles as a waveform.
If my post has helped you please click the white star on the right

Audio and video is out of sync!

when I record audio and video together with my isight built in camera on my macbook pro with either quicktime pro, photobooth or imovie, when I play the clip back the audio and video is out of sync! like watching a kung foo movie. I've tried everything, I've taken my book into see a "Genius" at thew mac store and he said to me that the isight is made really for video conferencing and is really not supposed to be fully in sync? Uhh thats weird, so mac makes a product and puts it on all their laptops and it only sort of works?? I've been on the phone with apple care, did a bunch of things like disk utility repairs on permisions, then used the startup disk to do another permisions repair. I've uninstalled quicktime pro and re-installed it a couple of times? If anyone could give me some advice that would be great! I'm a little frustrated as you can probably see! thanks
cheers
m

Welcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133&#7089133
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

I have used Sony for the past 5 or 6 years. They recently stopped selling books and migrated their customers to Kobo. In uploading the Kobo site it looks like I added a new Adobe ID. Then my reader and computers were out of sync. When I try to downlo

I have used Sony for the past 5 or 6 years. They recently stopped selling books and migrated their customers to Kobo. In uploading the Kobo site it looks like I added a new Adobe ID. Then my reader and computers were out of sync. When I try to download books I get that they were already downloaded by another user, but also that they are in my library. However, I can't find them, and if I do download, it gives me an error message that the book is DRM protected. How do I get to the point where I can download books again?

Please authorize ADE 3 with same credentials that you used with older version of ADE

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

Audio drops and comes back out of sync but dvd preview ok

hi All,
i put some photos and videos together in idvd project. The used one of their standard sound tracks to give the background music. The preview looked great so i burned the dvd but to my surprise when a particular video played around 8 min into the dvd the audio dropped and came about a min later with other photos getting it totally out of sync. I have tried removing few photos before that video comes to shift the video's location, there is a minor effect, it playes the clips audio in sync for slightly a sec or two longer but then drops and come back out of sync when it is showing still photos.
thanks in advance.

We have heard nothing about any changes in Encore for CC. I would be very surprised if anything fundamental, like the preview engine, has changed. We really don't know what is still the old sonic authorcore, what may have changed but is still sonic, and what is Adobe created. I have always assumed the preview is sonic.
Is the audio sync issue Bluray only, H.264 bluray only, or any particular audio formats? I don't recall getting the issue in Encore DVD playback.

Video and audio fall out of sync in Captivate 6

I made a great little video demo in which I added audio while I recorded it in Captivate 6. However when I play it back the audio and video fall out of sync. How can I fix my problem and how can I prevent it from happening again?
JJ

Douglas, I found that even the SWF files have started to get out of synch as well (although not as badly as the MP4), so with Adobe's blessing, I installed Captivate 7 on my 2009 model MacBook Pro (with Windows 7 running in Bootcamp) and now when I publish both SWF and MP4 projects, they are in perfect synch.
The strange thing is that my MacBook Pro probably has less grunt than my work PC (Dell Lattitude) and I would also have thought that running in a Bootcamp based Windows 7, that would detract even further from Captivate's performance.
I am happy that this solves the synch issue, I am not happy that I must continually move projects between my office PC and my home based MacBook Pro in order to do this and I am still none the wiser as to what is actually causing the problem; although I do wonder whether it is in some way related to the reporting to base issue that was causing Captivate 7 to go into a not responding state every few minutes (that was resolved with a patch provided by Adobe support)..

Video images and sound are out of sync

Hi, I'm new to videocasts so please forgive me. I have a few video podcasts that play fine in iTunes and in other iPods but audio and images become out of sync when I play it on my Nano. Does anyone have any suggestions?

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

Updated FCP 5.1 to 5.1.2 - Audio and video now out of sync

I just noticed in my software update that FCP needed to be updated. So I updated the program.
Now when I open exisiting projects the audio and video are out of sync even though they appear perfectly in sync in the timeline. Has anyone else had this problem? The problem also persists when cutting clips in the timeline. I will use the razor tool to make the cut and I cut the clip on a ceratain frame in the timeline and then in the viewer the clip was really cuts a second or two later. Does anyone know what is going on?
Very furstrating to say the least. Any help is much appreciated.
Thanks,
Clay

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

Audio and Video are Out of Sync

Hello,
This seems to be a reoccurring problem for me and I'd love some help getting it resolved once and for all. After capturing footage, the audio and video are out of sync in the clip AND when I drag it to the timeline. When I go through each part, it looks like the video hesitates often, which seems to be causing the misalignment of audio. But, once it is moved into alignment, it goes out of sync again throughout the remainder of the one hour video.
I'm capturing through a Canon Optura 50 Mini DV and editing with FCP 6.0.1. I have checked that the audio mode is set to 16 bit on the camera, and the capture settings have the audio rate for 48 KHz.
This same problem occurred when I was capturing another event last week.
PLEASE advise. It won't get aligned even if I take the hours and hours to move the audio left and right frame by frame.

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

New curent kernel and currenc gcc out of sync

I ran
pacman -Syu
this morning. I rebooted in console mode and recompiled ndiswrapper and the ATi drivers, then rebooted again. Now both ndiswrapper and fglrx are invalid, and I have no networking or GUI. The current kernel seems to have been built with gcc 4.1 but my current gcc is gcc 4.0. Seems like somebody goofed.
I don't mind packages being close to the cutting edge, but this isn't a "too new" problem. It seems more like a "oops I mixed up current with testing and released it to everyone" problem. Am I wrong?

Yep, i had to rollback because NFORCE wouldnt work either.
I started trying every mirror, because i thought they were out of sync or something, I think you should post some note on the front page about it, saying that there is no new GCC yet.
Regards!
(By the way, everything else worked nice and smooth, except for nv xorg drivers, that for some reason would get my monitor refresh rates out of ratio or something...).

After months, my loops and metronome are out of sync

I searched but couldn't find this: added some tracks to a metronome track, played them back and they are way off. I've recorded hundreds of tracks and they sync up no problem, added loops, still no problem. What could I have done to make everything out of sync? I can't record anything now.
Must be simple thing but 'sync' in HELP search produces nothing. Not sure what to look for.
Thanks

Been awhile- thanks for your reply. It just happened again. I moved a drum loop, changed the tempo. Then I added tracks and they are not syncing up with the drum loop. Each subsequent track appears to be in the same tempo as the drum loop.

WebAS 6.40 SP10 and JDI (SP09) out of sync

Hallo all,
my JDI installation (SP09) is out of sync with the WebAS on which it is running (SP10). What do I have to do in order to lift the JDI on SP10? Can I go ahead and apply JDI SP10 or is there another way of getting WebAS and JDI into sync again?
As a side note: I have already started to configure DTR and CBS and failed when trying to run the CMS WebUI for configuration purposes. That's when I became aware of the problem.
I greatly appreciate any help on this!
Best regards,
Helga

Hallo Michael,
thank you for this information! I have found this out and got it fixed myself just shortly after posting my question ;).
BR
Helga

Kernel-headers and kernel26-beyond out of sync?

Similar Messages

Maybe you are looking for