Kernel-lts and nvidia

Hello fellow Archies,
I'm trying to set up the proprietary nvidia X module on kernel-lts (2.6.32-15). The reason is that World of Warcraft had a recent patch that adds something related to debugger obfuscation, causing it to crash in wine on kernels later than 2.6.32. My two favorite computing things are programming and World of Warcraft, so I was wondering how I could about using the nvidia driver on kernel-lts?
I have tried the nvidia-all package on AUR. It did not build a module.

karol wrote:Have you tried booting w/ the fallback kernel + playing WoW?
I have now. It seems to have fixed the problem.
Out of curiosity, could you explain how the fallback kernel works?
EDIT: I must have gotten lucky with that run, because now it's crashing at the same point as before even on fallback.
Last edited by Furyhunter (2010-07-19 09:51:12)

Similar Messages

  • Kernel Upgrade and NVIDIA drifver lost

    Dear All,
    recently I updated the system, together with the kernel.
    unluckly I lost NVIDIA driver configuration.
    I tryes to follow again this guide,
    http://wiki.archlinux.org/index.php/How … DIA_driver
    but still it does not work.
    if I put vesa driver the system is back to work,
    obviously without graphic accelerator.
    converselly if I launch startxafter invidia configuration the monitor blink a little,
    and then I see only the coursor on the top left corner of the monitor,
    but I cannot interact with the system in any way.

    that's the xorg.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH x86_64
    Current Operating System: Linux terminus 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64
    Build Date: 15 May 2008 07:43:02PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 16 21:15:25 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "USB Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x7c04c0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2a00 card 1028,01ff rev 0c class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
    (II) PCI: 00:1a:0: chip 8086,2834 card 1028,01ff rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1a:1: chip 8086,2835 card 1028,01ff rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1a:7: chip 8086,283a card 1028,01ff rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1b:0: chip 8086,284b card 1028,01ff rev 02 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:5: chip 8086,2849 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,2830 card 1028,01ff rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,2831 card 1028,01ff rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,2832 card 1028,01ff rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,2836 card 1028,01ff rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0001,0000 rev f2 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,2815 card 1028,01ff rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,2850 card 1028,01ff rev 02 class 01,01,8a hdr 00
    (II) PCI: 00:1f:2: chip 8086,2828 card 1028,01ff rev 02 class 01,01,8f hdr 00
    (II) PCI: 00:1f:3: chip 8086,283e card 1028,01ff rev 02 class 0c,05,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,042d card 1028,01ff rev a1 class 03,00,00 hdr 00
    (II) PCI: 03:01:0: chip 1217,7135 card 2001,0000 rev 21 class 06,07,00 hdr 82
    (II) PCI: 03:01:4: chip 1217,00f7 card 1028,01ff rev 02 class 0c,00,10 hdr 00
    (II) PCI: 09:00:0: chip 14e4,1673 card 1028,01ff rev 02 class 02,00,00 hdr 00
    (II) PCI: 0c:00:0: chip 8086,4229 card 8086,1121 rev 61 class 02,80,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,13), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xfa000000 - 0xfeafffff (0x4b00000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 12: bridge is at (0:28:1), (0,12,12), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 12 non-prefetchable memory range:
    [0] -1 0 0xf9f00000 - 0xf9ffffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 13: bridge is at (0:28:3), (0,13,14), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 13 I/O range:
    [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
    (II) Bus 13 non-prefetchable memory range:
    [0] -1 0 0xf9c00000 - 0xf9efffff (0x300000) MX[b]
    (II) Bus 13 prefetchable memory range:
    [0] -1 0 0xf0000000 - 0xf01fffff (0x200000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 9: bridge is at (0:28:5), (0,9,9), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 9 non-prefetchable memory range:
    [0] -1 0 0xf9b00000 - 0xf9bfffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:30:0), (0,3,7), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 3 I/O range:
    [0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[b]
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xf9a00000 - 0xf9afffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-CardBus bridge:
    (II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x05c0 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
    [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
    (--) PCI:*(1:0:0) nVidia Corporation Quadro FX 360M rev 161, Mem @ 0xfd000000/24, 0xe0000000/28, 0xfa000000/25, I/O @ 0xdf00/7
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[b]
    [1] -1 0 0xf9bf0000 - 0xf9bfffff (0x10000) MX[b]
    [2] -1 0 0xf9afe800 - 0xf9afefff (0x800) MX[b]
    [3] -1 0 0xf9aff000 - 0xf9afffff (0x1000) MX[b]
    [4] -1 0 0xfebfbf00 - 0xfebfbfff (0x100) MX[b]
    [5] -1 0 0xfed1c000 - 0xfed1c3ff (0x400) MX[b]
    [6] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[b]
    [7] -1 0 0xfed1c400 - 0xfed1c7ff (0x400) MX[b]
    [8] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b](B)
    [9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [11] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
    [12] -1 0 0x0000eff0 - 0x0000efff (0x10) IX[b]
    [13] -1 0 0x00006ee0 - 0x00006eef (0x10) IX[b]
    [14] -1 0 0x00006ec8 - 0x00006ecb (0x4) IX[b]
    [15] -1 0 0x00006ec0 - 0x00006ec7 (0x8) IX[b]
    [16] -1 0 0x00006eb8 - 0x00006ebb (0x4) IX[b]
    [17] -1 0 0x00006eb0 - 0x00006eb7 (0x8) IX[b]
    [18] -1 0 0x00006fa0 - 0x00006faf (0x10) IX[b]
    [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1 0 0x00006f40 - 0x00006f5f (0x20) IX[b]
    [24] -1 0 0x00006f60 - 0x00006f7f (0x20) IX[b]
    [25] -1 0 0x00006f80 - 0x00006f9f (0x20) IX[b]
    [26] -1 0 0x00006f00 - 0x00006f1f (0x20) IX[b]
    [27] -1 0 0x00006f20 - 0x00006f3f (0x20) IX[b]
    [28] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[b]
    [1] -1 0 0xf9bf0000 - 0xf9bfffff (0x10000) MX[b]
    [2] -1 0 0xf9afe800 - 0xf9afefff (0x800) MX[b]
    [3] -1 0 0xf9aff000 - 0xf9afffff (0x1000) MX[b]
    [4] -1 0 0xfebfbf00 - 0xfebfbfff (0x100) MX[b]
    [5] -1 0 0xfed1c000 - 0xfed1c3ff (0x400) MX[b]
    [6] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[b]
    [7] -1 0 0xfed1c400 - 0xfed1c7ff (0x400) MX[b]
    [8] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b](B)
    [9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [11] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
    [12] -1 0 0x0000eff0 - 0x0000efff (0x10) IX[b]
    [13] -1 0 0x00006ee0 - 0x00006eef (0x10) IX[b]
    [14] -1 0 0x00006ec8 - 0x00006ecb (0x4) IX[b]
    [15] -1 0 0x00006ec0 - 0x00006ec7 (0x8) IX[b]
    [16] -1 0 0x00006eb8 - 0x00006ebb (0x4) IX[b]
    [17] -1 0 0x00006eb0 - 0x00006eb7 (0x8) IX[b]
    [18] -1 0 0x00006fa0 - 0x00006faf (0x10) IX[b]
    [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1 0 0x00006f40 - 0x00006f5f (0x20) IX[b]
    [24] -1 0 0x00006f60 - 0x00006f7f (0x20) IX[b]
    [25] -1 0 0x00006f80 - 0x00006f9f (0x20) IX[b]
    [26] -1 0 0x00006f00 - 0x00006f1f (0x20) IX[b]
    [27] -1 0 0x00006f20 - 0x00006f3f (0x20) IX[b]
    [28] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[b]
    [5] -1 0 0xf9bf0000 - 0xf9bfffff (0x10000) MX[b]
    [6] -1 0 0xf9afe800 - 0xf9afefff (0x800) MX[b]
    [7] -1 0 0xf9aff000 - 0xf9afffff (0x1000) MX[b]
    [8] -1 0 0xfebfbf00 - 0xfebfbfff (0x100) MX[b]
    [9] -1 0 0xfed1c000 - 0xfed1c3ff (0x400) MX[b]
    [10] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[b]
    [11] -1 0 0xfed1c400 - 0xfed1c7ff (0x400) MX[b]
    [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b](B)
    [13] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
    [18] -1 0 0x0000eff0 - 0x0000efff (0x10) IX[b]
    [19] -1 0 0x00006ee0 - 0x00006eef (0x10) IX[b]
    [20] -1 0 0x00006ec8 - 0x00006ecb (0x4) IX[b]
    [21] -1 0 0x00006ec0 - 0x00006ec7 (0x8) IX[b]
    [22] -1 0 0x00006eb8 - 0x00006ebb (0x4) IX[b]
    [23] -1 0 0x00006eb0 - 0x00006eb7 (0x8) IX[b]
    [24] -1 0 0x00006fa0 - 0x00006faf (0x10) IX[b]
    [25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x00006f40 - 0x00006f5f (0x20) IX[b]
    [30] -1 0 0x00006f60 - 0x00006f7f (0x20) IX[b]
    [31] -1 0 0x00006f80 - 0x00006f9f (0x20) IX[b]
    [32] -1 0 0x00006f00 - 0x00006f1f (0x20) IX[b]
    [33] -1 0 0x00006f20 - 0x00006f3f (0x20) IX[b]
    [34] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 173.14.05 Mon May 19 00:27:33 PDT 2008
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) NVIDIA dlloader X Driver 173.14.05 Mon May 19 00:09:56 PDT 2008
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[b]
    [5] -1 0 0xf9bf0000 - 0xf9bfffff (0x10000) MX[b]
    [6] -1 0 0xf9afe800 - 0xf9afefff (0x800) MX[b]
    [7] -1 0 0xf9aff000 - 0xf9afffff (0x1000) MX[b]
    [8] -1 0 0xfebfbf00 - 0xfebfbfff (0x100) MX[b]
    [9] -1 0 0xfed1c000 - 0xfed1c3ff (0x400) MX[b]
    [10] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[b]
    [11] -1 0 0xfed1c400 - 0xfed1c7ff (0x400) MX[b]
    [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b](B)
    [13] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
    [18] -1 0 0x0000eff0 - 0x0000efff (0x10) IX[b]
    [19] -1 0 0x00006ee0 - 0x00006eef (0x10) IX[b]
    [20] -1 0 0x00006ec8 - 0x00006ecb (0x4) IX[b]
    [21] -1 0 0x00006ec0 - 0x00006ec7 (0x8) IX[b]
    [22] -1 0 0x00006eb8 - 0x00006ebb (0x4) IX[b]
    [23] -1 0 0x00006eb0 - 0x00006eb7 (0x8) IX[b]
    [24] -1 0 0x00006fa0 - 0x00006faf (0x10) IX[b]
    [25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x00006f40 - 0x00006f5f (0x20) IX[b]
    [30] -1 0 0x00006f60 - 0x00006f7f (0x20) IX[b]
    [31] -1 0 0x00006f80 - 0x00006f9f (0x20) IX[b]
    [32] -1 0 0x00006f00 - 0x00006f1f (0x20) IX[b]
    [33] -1 0 0x00006f20 - 0x00006f3f (0x20) IX[b]
    [34] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[b]
    [5] -1 0 0xf9bf0000 - 0xf9bfffff (0x10000) MX[b]
    [6] -1 0 0xf9afe800 - 0xf9afefff (0x800) MX[b]
    [7] -1 0 0xf9aff000 - 0xf9afffff (0x1000) MX[b]
    [8] -1 0 0xfebfbf00 - 0xfebfbfff (0x100) MX[b]
    [9] -1 0 0xfed1c000 - 0xfed1c3ff (0x400) MX[b]
    [10] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[b]
    [11] -1 0 0xfed1c400 - 0xfed1c7ff (0x400) MX[b]
    [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b](B)
    [13] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [20] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
    [21] -1 0 0x0000eff0 - 0x0000efff (0x10) IX[b]
    [22] -1 0 0x00006ee0 - 0x00006eef (0x10) IX[b]
    [23] -1 0 0x00006ec8 - 0x00006ecb (0x4) IX[b]
    [24] -1 0 0x00006ec0 - 0x00006ec7 (0x8) IX[b]
    [25] -1 0 0x00006eb8 - 0x00006ebb (0x4) IX[b]
    [26] -1 0 0x00006eb0 - 0x00006eb7 (0x8) IX[b]
    [27] -1 0 0x00006fa0 - 0x00006faf (0x10) IX[b]
    [28] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [29] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [32] -1 0 0x00006f40 - 0x00006f5f (0x20) IX[b]
    [33] -1 0 0x00006f60 - 0x00006f7f (0x20) IX[b]
    [34] -1 0 0x00006f80 - 0x00006f9f (0x20) IX[b]
    [35] -1 0 0x00006f00 - 0x00006f1f (0x20) IX[b]
    [36] -1 0 0x00006f20 - 0x00006f3f (0x20) IX[b]
    [37] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b](B)
    [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
    (==) NVIDIA(0): RGB weight 565
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU Quadro FX 360M (G86GL) at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 524288 kBytes
    (--) NVIDIA(0): VideoBIOS: 60.86.47.00.02
    (II) NVIDIA(0): Detected PCI Express Link width: 16X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on Quadro FX 360M at PCI:1:0:0:
    (--) NVIDIA(0): Seiko (DFP-0)
    (--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
    (--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    (--) NVIDIA(0): DPI set to (78, 92); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
    (WW) NVIDIA(0): UBB.
    (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[b]
    [5] -1 0 0xf9bf0000 - 0xf9bfffff (0x10000) MX[b]
    [6] -1 0 0xf9afe800 - 0xf9afefff (0x800) MX[b]
    [7] -1 0 0xf9aff000 - 0xf9afffff (0x1000) MX[b]
    [8] -1 0 0xfebfbf00 - 0xfebfbfff (0x100) MX[b]
    [9] -1 0 0xfed1c000 - 0xfed1c3ff (0x400) MX[b]
    [10] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[b]
    [11] -1 0 0xfed1c400 - 0xfed1c7ff (0x400) MX[b]
    [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b](B)
    [13] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [20] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
    [21] -1 0 0x0000eff0 - 0x0000efff (0x10) IX[b]
    [22] -1 0 0x00006ee0 - 0x00006eef (0x10) IX[b]
    [23] -1 0 0x00006ec8 - 0x00006ecb (0x4) IX[b]
    [24] -1 0 0x00006ec0 - 0x00006ec7 (0x8) IX[b]
    [25] -1 0 0x00006eb8 - 0x00006ebb (0x4) IX[b]
    [26] -1 0 0x00006eb0 - 0x00006eb7 (0x8) IX[b]
    [27] -1 0 0x00006fa0 - 0x00006faf (0x10) IX[b]
    [28] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [29] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [32] -1 0 0x00006f40 - 0x00006f5f (0x20) IX[b]
    [33] -1 0 0x00006f60 - 0x00006f7f (0x20) IX[b]
    [34] -1 0 0x00006f80 - 0x00006f9f (0x20) IX[b]
    [35] -1 0 0x00006f00 - 0x00006f1f (0x20) IX[b]
    [36] -1 0 0x00006f20 - 0x00006f3f (0x20) IX[b]
    [37] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b](B)
    [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) NVIDIA(0): Initialized GPU GART.
    (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) NVIDIA(0): Setting mode "1024x768"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) Option "dpms" "true"
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Setting vga for screen 0.
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    Backtrace:
    0: /usr/bin/X(xf86SigHandler+0x6a) [0x4a035a]
    1: /lib/libc.so.6 [0x7f41640bf150]
    2: /usr/lib64/tls/libnvidia-tls.so.1 [0x7f41621de67e]
    Fatal server error:
    Caught signal 11. Server aborting

  • Virtualbox + mplayer slow in kernel-bfs and nvidia-bfs

    Today I tried the BFS kernel in AUR and updated the nvidia driver to nvidia-bfs (185). Everything seems OK. But when I play 1080p movies with a Windows XP running in Virtualbox, the computer becomes quite slow, the movie is not smooth as it's supposed to be. And frankly, the video playback is much worse than a vanilla kernel26.
    Have any of you experienced the similar incidents?
    Thanks

    this would makes sense as vobxdrv is a kernel module.  did you rebuild and modprobe for the bfs kernel?
    fraid i can't confirm what you're seeing, but i can say that playing 1080p in mplayer natively is much smoother for me when using bfs, probably the most demonstrable result i've seen from the new scheduler.
    also, since bfs patch level 300 or so i've been able to use the normal nvidia-beta drivers with bfs no problem.  makes switching back and forth that much easier.

  • [Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts

    I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot.  When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
    [ 24.856]
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    [ 24.857] X Protocol Version 11, Revision 0
    [ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
    [ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
    [ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
    [ 24.857] Build Date: 31 July 2014 11:53:19AM
    [ 24.857]
    [ 24.857] Current version of pixman: 0.32.6
    [ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
    [ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
    [ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 24.897] (==) ServerLayout "Layout0"
    [ 24.897] (**) |-->Screen "Screen0" (0)
    [ 24.897] (**) | |-->Monitor "Monitor0"
    [ 24.905] (**) | |-->Device "Device0"
    [ 24.905] (**) |-->Input Device "Keyboard0"
    [ 24.905] (**) |-->Input Device "Mouse0"
    [ 24.905] (==) Automatically adding devices
    [ 24.905] (==) Automatically enabling devices
    [ 24.905] (==) Automatically adding GPU devices
    [ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 24.914] Entry deleted from font path.
    [ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 24.914] Entry deleted from font path.
    [ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 24.914] Entry deleted from font path.
    [ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 24.914] Entry deleted from font path.
    [ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 24.914] Entry deleted from font path.
    [ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 24.914] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 24.914] (WW) Disabling Keyboard0
    [ 24.914] (WW) Disabling Mouse0
    [ 24.914] (II) Loader magic: 0x818d80
    [ 24.914] (II) Module ABI versions:
    [ 24.914] X.Org ANSI C Emulation: 0.4
    [ 24.914] X.Org Video Driver: 18.0
    [ 24.914] X.Org XInput driver : 21.0
    [ 24.914] X.Org Server Extension : 8.0
    [ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
    [ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 24.919] (II) LoadModule: "glx"
    [ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
    [ 25.974] compiled for 4.0.2, module version = 1.0.0
    [ 25.974] Module class: X.Org Server Extension
    [ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
    [ 25.974] (II) LoadModule: "nvidia"
    [ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 26.027] compiled for 4.0.2, module version = 1.0.0
    [ 26.027] Module class: X.Org Video Driver
    [ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
    [ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
    [ 26.042] (II) UnloadModule: "nvidia"
    [ 26.042] (II) Unloading nvidia
    [ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
    [ 26.042] (EE) No drivers available.
    [ 26.042] (EE)
    Fatal server error:
    [ 26.042] (EE) no screens found(EE)
    [ 26.042] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 26.042] (EE)
    It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log.  My dmesg looks like this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 000000000 mask F00000000 write-back
    [ 0.000000] 3 base 100000000 mask FE0000000 write-back
    [ 0.000000] 4 base 120000000 mask FF0000000 write-back
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
    [ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
    [ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
    [ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
    [ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
    [ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
    [ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    [ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x12fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
    [ 0.000000] On node 0 totalpages: 1048381
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13247 pages used for memmap
    [ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
    [ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.000000] tsc: Detected 2333.276 MHz processor
    [ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
    [ 0.006685] pid_max: default: 32768 minimum: 301
    [ 0.006695] ACPI: Core revision 20140424
    [ 0.012534] ACPI: All ACPI Tables successfully acquired
    [ 0.013368] Security Framework initialized
    [ 0.013377] Yama: becoming mindful.
    [ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.018300] Initializing cgroup subsys memory
    [ 0.018326] Initializing cgroup subsys devices
    [ 0.018334] Initializing cgroup subsys freezer
    [ 0.018338] Initializing cgroup subsys net_cls
    [ 0.018344] Initializing cgroup subsys blkio
    [ 0.018375] CPU: Physical Processor ID: 0
    [ 0.018376] CPU: Processor Core ID: 0
    [ 0.018379] mce: CPU supports 6 MCE banks
    [ 0.018387] CPU0: Thermal monitoring enabled (TM2)
    [ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    [ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.019569] ftrace: allocating 20434 entries in 80 pages
    [ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
    [ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063333] ... version: 2
    [ 0.063333] ... bit width: 40
    [ 0.063333] ... generic registers: 2
    [ 0.063333] ... value mask: 000000ffffffffff
    [ 0.063333] ... max period: 000000007fffffff
    [ 0.063333] ... fixed-purpose events: 3
    [ 0.063333] ... event mask: 0000000700000003
    [ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083412] x86: Booting SMP configuration:
    [ 0.083415] .... node #0, CPUs: #1 #2 #3
    [ 0.130014] x86: Booted up 1 node, 4 CPUs
    [ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
    [ 0.133346] devtmpfs: initialized
    [ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
    [ 0.137923] pinctrl core: initialized pinctrl subsystem
    [ 0.137968] RTC time: 1:49:28, date: 09/18/14
    [ 0.138025] NET: Registered protocol family 16
    [ 0.138158] cpuidle: using governor ladder
    [ 0.138160] cpuidle: using governor menu
    [ 0.138185] ACPI: bus type PCI registered
    [ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.138270] PCI: not using MMCONFIG
    [ 0.138272] PCI: Using configuration type 1 for base access
    [ 0.153430] ACPI: Added _OSI(Module Device)
    [ 0.153430] ACPI: Added _OSI(Processor Device)
    [ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.157331] ACPI: Dynamic OEM Table Load:
    [ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
    [ 0.157716] ACPI: Dynamic OEM Table Load:
    [ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.158103] ACPI: Dynamic OEM Table Load:
    [ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.158489] ACPI: Dynamic OEM Table Load:
    [ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.158833] ACPI: Interpreter enabled
    [ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.158859] ACPI: Using IOAPIC for interrupt routing
    [ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.165516] PCI host bridge to bus 0000:00
    [ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    [ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
    [ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    [ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    [ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
    [ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
    [ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
    [ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
    [ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
    [ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
    [ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
    [ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
    [ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
    [ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
    [ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
    [ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
    [ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
    [ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
    [ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
    [ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
    [ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
    [ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
    [ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
    [ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
    [ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
    [ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
    [ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
    [ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
    [ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
    [ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
    [ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
    [ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
    [ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
    [ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
    [ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
    [ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
    [ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
    [ 0.169663] pci 0000:02:00.0: supports D1 D2
    [ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
    [ 0.170025] pci 0000:01:05.0: supports D1 D2
    [ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
    [ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
    [ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
    [ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
    [ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
    [ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.171253] vgaarb: loaded
    [ 0.171253] vgaarb: bridge control possible 0000:04:00.0
    [ 0.171253] PCI: Using ACPI for IRQ routing
    [ 0.179597] PCI: pci_cache_line_size set to 64 bytes
    [ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
    [ 0.179795] NetLabel: Initializing
    [ 0.179797] NetLabel: domain hash size = 128
    [ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.179813] NetLabel: unlabeled traffic allowed by default
    [ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.181019] Switched to clocksource hpet
    [ 0.187008] pnp: PnP ACPI init
    [ 0.187030] ACPI: bus type PNP registered
    [ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
    [ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
    [ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
    [ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
    [ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.188133] pnp: PnP ACPI: found 8 devices
    [ 0.188135] ACPI: bus type PNP unregistered
    [ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
    [ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
    [ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
    [ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
    [ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
    [ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
    [ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
    [ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
    [ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
    [ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
    [ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
    [ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    [ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    [ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
    [ 0.197657] NET: Registered protocol family 2
    [ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.198193] TCP: reno registered
    [ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.198298] NET: Registered protocol family 1
    [ 0.199202] pci 0000:04:00.0: Boot video device
    [ 0.199211] PCI: CLS 32 bytes, default 64
    [ 0.199266] Unpacking initramfs...
    [ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
    [ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
    [ 0.265383] Scanning for low memory corruption every 60 seconds
    [ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.268226] zbud: loaded
    [ 0.268426] VFS: Disk quotas dquot_6.5.2
    [ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.268644] msgmni has been set to 7909
    [ 0.268709] Key type big_key registered
    [ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.269162] io scheduler noop registered
    [ 0.269165] io scheduler deadline registered
    [ 0.269227] io scheduler cfq registered (default)
    [ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
    [ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.269839] intel_idle: does not run on family 6 model 23
    [ 0.269876] GHES: HEST is not enabled!
    [ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.270599] Linux agpgart interface v0.103
    [ 0.270658] rtc_cmos 00:01: RTC can wake from S4
    [ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.270984] TCP: cubic registered
    [ 0.271114] NET: Registered protocol family 10
    [ 0.271372] NET: Registered protocol family 17
    [ 0.271821] registered taskstats version 1
    [ 0.272365] Magic number: 14:261:812
    [ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
    [ 0.272539] PM: Hibernation image not present or could not be loaded.
    [ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.273769] Write protecting the kernel read-only data: 8192k
    [ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.286420] systemd-udevd[59]: starting version 216
    [ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.305975] ACPI: bus type USB registered
    [ 0.306007] usbcore: registered new interface driver usbfs
    [ 0.306020] usbcore: registered new interface driver hub
    [ 0.306135] usbcore: registered new device driver usb
    [ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.307076] ehci-pci: EHCI PCI platform driver
    [ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
    [ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
    [ 0.315748] SCSI subsystem initialized
    [ 0.317397] libata version 3.00 loaded.
    [ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.323598] hub 1-0:1.0: USB hub found
    [ 0.323608] hub 1-0:1.0: 4 ports detected
    [ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
    [ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.336926] hub 2-0:1.0: USB hub found
    [ 0.336936] hub 2-0:1.0: 8 ports detected
    [ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
    [ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
    [ 0.337866] hub 3-0:1.0: USB hub found
    [ 0.337875] hub 3-0:1.0: 2 ports detected
    [ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
    [ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
    [ 0.338347] hub 4-0:1.0: USB hub found
    [ 0.338355] hub 4-0:1.0: 2 ports detected
    [ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
    [ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
    [ 0.338786] hub 5-0:1.0: USB hub found
    [ 0.338794] hub 5-0:1.0: 2 ports detected
    [ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
    [ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
    [ 0.339235] hub 6-0:1.0: USB hub found
    [ 0.339244] hub 6-0:1.0: 2 ports detected
    [ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
    [ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
    [ 0.339667] hub 7-0:1.0: USB hub found
    [ 0.339675] hub 7-0:1.0: 2 ports detected
    [ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
    [ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
    [ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
    [ 0.340109] hub 8-0:1.0: USB hub found
    [ 0.340117] hub 8-0:1.0: 2 ports detected
    [ 0.340263] ahci 0000:00:1f.2: version 3.0
    [ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 0.374399] scsi0 : ahci
    [ 0.374615] scsi1 : ahci
    [ 0.374814] scsi2 : ahci
    [ 0.375005] scsi3 : ahci
    [ 0.375196] scsi4 : ahci
    [ 0.375388] scsi5 : ahci
    [ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
    [ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
    [ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
    [ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
    [ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
    [ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
    [ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
    [ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
    [ 0.754296] hub 1-2:1.0: USB hub found
    [ 0.754373] hub 1-2:1.0: 7 ports detected
    [ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
    [ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
    [ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
    [ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.340399] ata3.00: configured for UDMA/133
    [ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
    [ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
    [ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
    [ 1.500227] scsi6 : usb-storage 2-5:1.0
    [ 1.500322] usbcore: registered new interface driver usb-storage
    [ 1.500694] usbcore: registered new interface driver uas
    [ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
    [ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
    [ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
    [ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
    [ 2.266750] Switched to clocksource tsc
    [ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
    [ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    [ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    [ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    [ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    [ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586591] usbcore: registered new interface driver usbhid
    [ 2.586594] usbhid: USB HID core driver
    [ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
    [ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
    [ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
    [ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
    [ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
    [ 2.628682] ata6.00: configured for UDMA/100
    [ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
    [ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
    [ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
    [ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
    [ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
    [ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
    [ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
    [ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
    [ 3.257551] hub 1-2.7:1.0: USB hub found
    [ 3.257622] hub 1-2.7:1.0: 4 ports detected
    [ 3.316702] floppy0: no floppy controllers found
    [ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.027733] random: nonblocking pool is initialized
    [ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 4.403452] systemd[1]: Detected architecture 'x86-64'.
    [ 4.434571] systemd[1]: Set hostname to <yte>.
    [ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 5.264334] systemd[1]: Starting Remote File Systems.
    [ 5.264630] systemd[1]: Reached target Remote File Systems.
    [ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 5.265067] systemd[1]: Starting Paths.
    [ 5.265331] systemd[1]: Reached target Paths.
    [ 5.265342] systemd[1]: Starting Encrypted Volumes.
    [ 5.265614] systemd[1]: Reached target Encrypted Volumes.
    [ 5.265625] systemd[1]: Expecting device dev-sda3.device...
    [ 5.265819] systemd[1]: Expecting device dev-sda6.device...
    [ 5.266013] systemd[1]: Starting Root Slice.
    [ 5.275815] systemd[1]: Created slice Root Slice.
    [ 5.275829] systemd[1]: Starting User and Session Slice.
    [ 5.276279] systemd[1]: Created slice User and Session Slice.
    [ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
    [ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
    [ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 5.277824] systemd[1]: Starting udev Kernel Socket.
    [ 5.278109] systemd[1]: Listening on udev Kernel Socket.
    [ 5.278123] systemd[1]: Starting udev Control Socket.
    [ 5.278410] systemd[1]: Listening on udev Control Socket.
    [ 5.278424] systemd[1]: Starting Journal Socket.
    [ 5.278716] systemd[1]: Listening on Journal Socket.
    [ 5.278736] systemd[1]: Starting System Slice.
    [ 5.279185] systemd[1]: Created slice System Slice.
    [ 5.279201] systemd[1]: Starting File System Check on Root Device...
    [ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 5.371945] systemd[1]: Mounting Temporary Directory...
    [ 5.379927] systemd[1]: Starting system-getty.slice.
    [ 5.380442] systemd[1]: Created slice system-getty.slice.
    [ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
    [ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
    [ 5.503309] systemd[1]: Started Load Kernel Modules.
    [ 5.503363] systemd[1]: Starting Apply Kernel Variables...
    [ 5.504202] systemd[1]: Mounting Configuration File System...
    [ 5.504898] systemd[1]: Mounted FUSE Control File System.
    [ 5.504935] systemd[1]: Mounting Huge Pages File System...
    [ 5.505656] systemd[1]: Mounting Debug File System...
    [ 5.506353] systemd[1]: Starting Setup Virtual Console...
    [ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
    [ 5.507863] systemd[1]: Starting Journal Service...
    [ 5.508912] systemd[1]: Started Journal Service.
    [ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [ 5.836201] systemd-udevd[175]: starting version 216
    [ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
    [ 6.237029] ACPI: Power Button [PWRB]
    [ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 6.237092] ACPI: Power Button [PWRF]
    [ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
    [ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
    [ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
    [ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
    [ 6.697724] sound hdaudioC0D0: inputs:
    [ 6.697726] sound hdaudioC0D0: Front Mic=0x19
    [ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
    [ 6.697731] sound hdaudioC0D0: Line=0x1c
    [ 6.697732] sound hdaudioC0D0: dig-in=0x1f
    [ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
    [ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
    [ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
    [ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
    [ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
    [ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
    [ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
    [ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.852178] iTCO_vendor_support: vendor-support=0
    [ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
    [ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
    [ 6.962065] mousedev: PS/2 mouse device common for all mice
    [ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
    [ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 9.356701] floppy0: no floppy controllers found
    [ 10.274611] r8169 0000:02:00.0 enp2s0: link down
    [ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 11.871962] r8169 0000:02:00.0 enp2s0: link up
    [ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies.  Would anyone be able to see where I am going wrong?
    Last edited by meschael (2014-09-18 04:16:08)

    The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
    +++++++++
    Update: Solved
    +++++++++
    I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting.  This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox.  Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
    Last edited by meschael (2014-09-18 04:15:30)

  • Any known problems with 2.6.32.5 kernel, xorg 1.7.3.902 and nvidia 190

    Hi everybody.
    Last update I did was when xorg 1.7.x (where x is between 1 and 3, dont remember), and it broke my xorg, I had some glitches with graphics, and x randomly crashed.
    Now xorg 1.7.3, kernel 2.6.32.5 and nvidia 190.53 is here for pretty long time and as arch suer I feel committed to update
    So i read the forum here a bit, and havent found any particular issues that broke the system, but I want to be safe.
    I got nvidia geforce 6600 agp if it does matter.
    So is there any particular issues that can arise after updating?
    Thanks a lot!

    Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
    I got nvidia geforce 7300.
    Any solution to this besides downgrading?

  • Custom kernel 2.6.25 and nvidia

    I have compiled a custom kernel the 'traditional' way, that is, make and make modules_install and now I am having trouble getting the nvidia driver to work
    I usually just install it through pacman, but that doesn't work with the custom kernel.
    So my next step was to follow the wiki.
    I changed the kernel names in the PKGBUILD and nvidia.install that i got from my abs tree, and when I install with makepkg -i -c everything goes well.
    However, when I try to start X again, it crashes and says it cannot find the NVIDIA kernel module. I don't fully understand everything in the PKGBUILD and it is quite possible there is some other line or path that needs to be changed. Please, I am at my wit's end.
    Here are my PKGBUILD and nvidia.install
    # $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $
    # Maintainer : Thomas Baechler <[email protected]>
    pkgname=nvidia-DarkTower
    pkgver=169.12
    _kernver='2.6.25-DarkTower'
    pkgrel=2
    pkgdesc="NVIDIA drivers for kernel26."
    arch=('i686' 'x86_64')
    [ "$CARCH" = "i686" ] && ARCH=x86
    [ "$CARCH" = "x86_64" ] && ARCH=x86_64
    url="http://www.nvidia.com/"
    depends=('kernel26>=2.6.24.3-4' 'kernel26<=2.6.25-0' 'nvidia-utils')
    conflicts=('nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
    license=('custom')
    install=nvidia.install
    source=(http://us.download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run)
    md5sums=('e7aaca79c846e34cfe8111040bfee2d0')
    [ "$CARCH" = "x86_64" ] && md5sums=('843a1e8bc1923ba2e4b60f6fab31ad3b')
    build()
    # Extract
    cd $startdir/src/
    sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
    cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
    # Any extra patches are applied in here...
    cd usr/src/nv/
    ln -s Makefile.kbuild Makefile
    make SYSSRC=/lib/modules/${_kernver}/build module
    # install kernel module
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
    install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
    sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install
    # arg 1: the new package version
    post_install() {
    KERNEL_VERSION='2.6.25-DarkTower'
    depmod -v $KERNEL_VERSION > /dev/null 2>&1
    # arg 1: the new package version
    # arg 2: the old package version
    post_upgrade() {
    post_install $1
    rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
    # arg 1: the old package version
    post_remove() {
    KERNEL_VERSION='2.6.25-DarkTower'
    depmod -v $KERNEL_VERSION > /dev/null 2>&1
    op=$1
    shift
    $op $*
    Last edited by ManOnONeWheel (2008-05-07 00:41:50)

    I don't use Arch package for nvidia as script is unable to install modules on several kernels at the same time and I want to boot to X irrelevant of kernel loaded. I never had any problems with custom kernels 2.6.25 and nvidia 169 or 173
    current status:
    $ find /lib/modules/ -name nvidia.ko
    /lib/modules/2.6.25-zen0-GIGUE/kernel/drivers/video/nvidia.ko
    /lib/modules/2.6.25-zen1-preview3-FADO/kernel/drivers/video/nvidia.ko
    /lib/modules/2.6.25-zen1-SARABANDE/kernel/drivers/video/nvidia.ko
    /lib/modules/2.6.25-zen1-GAVOTTE/kernel/drivers/video/nvidia.ko
    all boots fine, none crash/freeze. Never patched 169 or 173
    Well, it looks like the 169 installer would always put nvidia.ko in the /lib/modules/2.6.24 directory, no matter if i was currentlyusing a different kernel or not so im not sure what is going on there.
    must be some quirk on your box. Have not seen this.
    Last edited by broch (2008-05-08 01:43:13)

  • Stock kernel isn't compatible with nvidia-dkms and nvidia-hook?

    Hello pals
    I'm using linux-ice, linux-lqx and linux-ck kernels with nvidia-dkms and nvidia-hook. Everything is ok, with kde upping.
    I've started from stock kernel. During the dkms (or hook, I don't remember) pacman says that nvidia and nvidia(dkms or hook) were incompatible... remove nvidia? I've selected yes
    After it, stock kernel don't upps the kde... stays on black screen. Login on tty1, 2 or 3 is possible, with ctrl+alt+F1...F3, but, kde with kernel don't works
    no errors appears.
    to force stock kernel been compiled by hook, I wait a while, when using the other kernels, and yesterday I did a "Syyu"
    new kernel, new linux-headers too... but still blank screen
    I only can use stock kernel and Nvidia driver, not dkms/hook installed one?

    Ok, i know little about dkms / mkinitcpio hooks , but best option seems to try and build the nividia module manually to get more info.
    nvidia-hook gets sources from here : https://github.com/alucryd/mkinitcpio-hooks/ ,
    build ()
    _version=$(pacman -Qs '^nvidia$'|sed 's/^[^ ]* \|-[0-9]*$//g;2d')
    echo "Building nvidia modules for ${KERNELVERSION} kernel..."
    dkms install nvidia/${_version} -k ${KERNELVERSION}/_arch
    echo "Ok."
    help ()
    cat<<HELPEOF
    This hook rebuilds nvidia modules. It does nothing to the initrd image.
    HELPEOF
    looks like all the hook does is run dkms install, try running that command manually to get more info.

  • Can't load nvidia module after kernel and nvidia update

    After latest kernel (3.6.36.2) and nvidia (260.19.29) upgrade xorg doesn't work. I investigated a little, and that's what I found:
    # modprobe nvidia
    FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such device
    I blacklisted nouveau module:
    # cat /etc/rc.conf | grep nouveau
    MODULES=(b43 vboxdrv !nouveau)
    but it didn't help.
    Video card:
    # lspci | grep VGA
    01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)

    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000005fed0000 (usable)
    BIOS-e820: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
    BIOS-e820: 000000005fee3000 - 0000000060000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
    DMI present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x5fed0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask FC0000000 write-back
    1 base 040000000 mask FE0000000 write-back
    2 base 05FF00000 mask FFFF00000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f800 (usable)
    modified: 000000000009f800 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000005fed0000 (usable)
    modified: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
    modified: 000000005fee3000 - 0000000060000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed14000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    found SMP MP-table at [c00f7bc0] f7bc0
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 37e47000 - 37ff0000
    Allocated new RAMDISK: 00100000 - 002a8feb
    Move RAMDISK from 0000000037e47000 - 0000000037feffea to 00100000 - 002a8fea
    ACPI: RSDP 000f7b40 00024 (v02 Compal)
    ACPI: XSDT 5fed8834 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
    ACPI: FACP 5fedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    ACPI: DSDT 5fed9b9f 05FBF (v02 Compal CRESTLNE 06040000 INTL 20061109)
    ACPI: FACS 5fee2fc0 00040
    ACPI: APIC 5fedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    ACPI: HPET 5fedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
    ACPI: MCFG 5fedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    ACPI: TCPA 5fedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
    ACPI: TMOR 5fedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
    ACPI: SLIC 5fedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
    ACPI: APIC 5fedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 5fedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SSDT 5fed98da 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
    ACPI: SSDT 5fed8e4c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 5fed8da6 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    ACPI: SSDT 5fed88c0 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    ACPI: Local APIC address 0xfee00000
    646MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0005fed0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0005fed0
    On node 0 totalpages: 392800
    free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3952 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 1294 pages used for memmap
    HighMem zone: 164292 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 13 pages/cpu @c2400000 s31488 r0 d21760 u2097152
    pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389730
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2 ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 7858220 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (52 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 000158fe8c] TEXT DATA BSS
    #3 [0001590000 - 0001596198] BRK
    #4 [00000f7bd0 - 0000100000] BIOS reserved
    #5 [00000f7bc0 - 00000f7bd0] MP-table mpf
    #6 [000009f800 - 000009fd71] BIOS reserved
    #7 [000009ff35 - 00000f7bc0] BIOS reserved
    #8 [000009fd71 - 000009ff35] MP-table mpc
    #9 [0000010000 - 0000011000] TRAMPOLINE
    #10 [0000011000 - 0000015000] ACPI WAKEUP
    #11 [0000015000 - 0000016000] PGTABLE
    #12 [0000100000 - 00002a9000] NEW RAMDISK
    #13 [0001597000 - 0001598000] BOOTMEM
    #14 [0001598000 - 0002198000] BOOTMEM
    #15 [000158fec0 - 000158fec4] BOOTMEM
    #16 [000158ff00 - 000158ffc0] BOOTMEM
    #17 [00015961c0 - 0001596214] BOOTMEM
    #18 [0002198000 - 000219b000] BOOTMEM
    #19 [000158ffc0 - 0001590000] BOOTMEM
    #20 [000219b000 - 000219e000] BOOTMEM
    #21 [0001596240 - 0001596265] BOOTMEM
    #22 [0001596280 - 00015962a7] BOOTMEM
    #23 [00015962c0 - 0001596464] BOOTMEM
    #24 [0001596480 - 00015964c0] BOOTMEM
    #25 [00015964c0 - 0001596500] BOOTMEM
    #26 [0001596500 - 0001596540] BOOTMEM
    #27 [0001596540 - 0001596580] BOOTMEM
    #28 [0001596580 - 00015965c0] BOOTMEM
    #29 [00015965c0 - 0001596600] BOOTMEM
    #30 [0001596600 - 0001596640] BOOTMEM
    #31 [0001596640 - 0001596680] BOOTMEM
    #32 [0001596680 - 00015966c0] BOOTMEM
    #33 [00015966c0 - 0001596700] BOOTMEM
    #34 [0001596700 - 0001596740] BOOTMEM
    #35 [0001596740 - 0001596780] BOOTMEM
    #36 [0001596780 - 0001596790] BOOTMEM
    #37 [00015967c0 - 00015967d0] BOOTMEM
    #38 [0001596800 - 000159682d] BOOTMEM
    #39 [0001596840 - 000159686d] BOOTMEM
    #40 [0002400000 - 000240d000] BOOTMEM
    #41 [0002600000 - 000260d000] BOOTMEM
    #42 [0001596880 - 0001596884] BOOTMEM
    #43 [00015968c0 - 00015968c4] BOOTMEM
    #44 [0001596900 - 0001596908] BOOTMEM
    #45 [0001596940 - 0001596948] BOOTMEM
    #46 [0001596980 - 0001596a28] BOOTMEM
    #47 [0001596a40 - 0001596aa8] BOOTMEM
    #48 [000219e000 - 00021a2000] BOOTMEM
    #49 [00021a2000 - 0002222000] BOOTMEM
    #50 [0002222000 - 0002262000] BOOTMEM
    #51 [000260d000 - 0002d8b82c] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0005fed0)
    Memory: 1542868k/1571648k available (3104k kernel code, 28332k reserved, 1205k data, 428k init, 662344k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1436000 - 0xc14a1000 ( 428 kB)
    .data : 0xc1308056 - 0xc1435820 (1205 kB)
    .text : 0xc1000000 - 0xc1308056 (3104 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1795.546 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.72 BogoMIPS (lpj=5985153)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    PEBS disabled due to CPU errata.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    CPU1: Thermal monitoring handled by SMI
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (7184.34 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: not using MMCONFIG
    PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 5fed95da 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 5fed90ab 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: SSDT 5fed9812 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 5fed9555 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
    pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
    pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
    pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
    pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
    pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
    pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
    pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
    pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
    pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
    pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
    pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
    pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
    pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
    pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
    pci 0000:04:00.0: PME# supported from D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 06-06]
    pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 08-08]
    pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
    pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8003fff]
    pci 0000:0c:00.0: supports D1 D2
    pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
    pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff]
    pci 0000:0e:06.0: supports D1 D2
    pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:0e:06.0: PME# disabled
    pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff]
    pci 0000:0e:06.1: supports D1 D2
    pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:0e:06.1: PME# disabled
    pci 0000:0e:06.2: reg 10: [mem 0xf8101000-0xf81010ff]
    pci 0000:0e:06.2: supports D1 D2
    pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:0e:06.2: PME# disabled
    pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009f800 - 000000000009ffff
    reserve RAM buffer: 000000005fed0000 - 000000005fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:06: [io 0x0680-0x069f] has been reserved
    system 00:06: [io 0x0800-0x080f] has been reserved
    system 00:06: [io 0x1000-0x107f] has been reserved
    system 00:06: [io 0x1180-0x11bf] has been reserved
    system 00:06: [io 0x1640-0x164f] has been reserved
    system 00:06: [io 0xfe00] has been reserved
    system 00:06: [io 0xff00-0xff7f] has been reserved
    pci 0000:00:1c.4: BAR 14: assigned [mem 0x60000000-0x601fffff]
    pci 0000:00:1c.4: BAR 15: assigned [mem 0x60200000-0x603fffff 64bit pref]
    pci 0000:00:1c.5: BAR 15: assigned [mem 0x60400000-0x605fffff 64bit pref]
    pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
    pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
    pci 0000:00:1f.3: BAR 0: assigned [mem 0x60600000-0x606000ff]
    pci 0000:00:1f.3: BAR 0: set to [mem 0x60600000-0x606000ff] (PCI address [0x60600000-0x606000ff]
    pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
    pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
    pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 06-06]
    pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 08-08]
    pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
    pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
    pci 0000:00:1c.4: bridge window [mem 0x60000000-0x601fffff]
    pci 0000:00:1c.4: bridge window [mem 0x60200000-0x603fffff 64bit pref]
    pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
    pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
    pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    pci 0000:00:1c.5: bridge window [mem 0x60400000-0x605fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
    pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbfffffff]
    pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
    pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
    pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
    pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
    pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
    pci_bus 0000:08: resource 1 [mem 0xb4000000-0xb7ffffff]
    pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
    pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
    pci_bus 0000:0a: resource 1 [mem 0x60000000-0x601fffff]
    pci_bus 0000:0a: resource 2 [mem 0x60200000-0x603fffff 64bit pref]
    pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
    pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
    pci_bus 0000:0c: resource 2 [mem 0x60400000-0x605fffff 64bit pref]
    pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff]
    pci_bus 0000:0e: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:0e: resource 5 [mem 0x00000000-0xffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1700k freed
    Simple Boot Flag at 0x38 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1294159792.419:1): initialized
    highmem bounce pool size: 64 pages
    HugeTLB registered 4 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1723
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    intel_idle: MWAIT substates: 0x22220
    intel_idle: does not run on family 6 model 15
    ERST: Table is not found!
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:07: setting system clock to 2011-01-04 16:49:53 UTC (1294159793)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 428k freed
    udev[38]: starting version 165
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 40
    ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 40
    ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 40
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    ata4.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33
    ata4.00: configured for UDMA/33
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1.00: unexpected _GTF length (8)
    ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: unexpected _GTF length (8)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
    scsi 3:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[839]: starting version 165
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    input: PC Speaker as /devices/platform/pcspkr/input/input4
    Switching to clocksource hpet
    compal-laptop: Identified laptop model 'FL90/IFL90'
    cfg80211: Calling CRDA to update world regulatory domain
    compal-laptop: Driver 0.2.7 successfully loaded
    i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    Linux agpgart interface v0.103
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    iTCO_vendor_support: vendor-support=0
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
    sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
    sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 3:0:0:0: Attached scsi generic sg1 type 5
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: WMI: Mapper loaded
    ACPI: AC Adapter [ACAD] (on-line)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    acpi device:03: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
    ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
    ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
    ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
    ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
    ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    psmouse serio1: ID: 10 00 64
    firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    tg3.c:v3.113 (August 2, 2010)
    tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    tg3 0000:04:00.0: setting latency timer to 64
    tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    elantech: assuming hardware version 1, firmware version 2.0.4
    tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1b:38:55:15:a4
    tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    firewire_core: created device fw0: GUID 00023f79b240229a, S400
    b43-phy0: Broadcom 4311 WLAN found (core revision 10)
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    phy0: Selected rate control algorithm 'minstrel_ht'
    Registered led device: b43-phy0::tx
    Registered led device: b43-phy0::rx
    Registered led device: b43-phy0::radio
    Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
    input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
    input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    nvidia 0000:01:00.0: power state changed by ACPI to D0
    nvidia 0000:01:00.0: power state changed by ACPI to D0
    nvidia 0000:01:00.0: enabling device (0000 -> 0003)
    nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidia 0000:01:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
    NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
    NVRM: graphics driver release. Please see 'Appendix A -
    NVRM: Supported NVIDIA GPU Products' in this release's README,
    NVRM: available on the Linux graphics driver download page at
    NVRM: www.nvidia.com.
    nvidia: probe of 0000:01:00.0 failed with error -1
    NVRM: The NVIDIA probe routine failed for 1 device(s).
    NVRM: None of the NVIDIA graphics adapters were initialized!
    EXT4-fs (sda2): re-mounted. Opts: (null)
    EXT4-fs (sda2): re-mounted. Opts: (null)
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    fuse init (API version 7.15)
    Adding 3156768k swap on /dev/sda3. Priority:-1 extents:1 across:3156768k
    nvidia 0000:01:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
    NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
    NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
    NVRM: graphics driver release. Please see 'Appendix A -
    NVRM: Supported NVIDIA GPU Products' in this release's README,
    NVRM: available on the Linux graphics driver download page at
    NVRM: www.nvidia.com.
    nvidia: probe of 0000:01:00.0 failed with error -1
    NVRM: The NVIDIA probe routine failed for 1 device(s).
    NVRM: None of the NVIDIA graphics adapters were initialized!
    last lines looks interesting, but I also checked mentioned Appendix A of README, and I found 8600M GT (PCI ID 0x0407) between supported chips.

  • Kernel 3.0 and nVidia GeFORCE GT540M [RESOLVED]

    Hi guys,
    Does anyone know if this video card is supported?
    I can't get it to work with nouveau nor nVidia propietary driver which claims it is supported.
    I'm using Arch 64 bits and I've tried nouveau, nv and nvidia drivers.
    Thanks a lot in advance.
    Cheers!
    Last edited by kandalf (2011-09-02 11:55:52)

    I get no errors on Xorg.0.log but I can't get KDE to get up.
    When I run /etc/rc.d/kdm start, it looks like X is started but all I see in tty/7 is a black screen with a static cursor at the upper left corner.
    These are my xorg.conf and Xorg.0.log files: (I had to generate an xorg.conf file since autodetection wasn't working)
    xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen1" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    Load "dbe"
    Load "record"
    Load "dri2"
    Load "extmod"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "SWcursor" # [<bool>]
    #Option "HWcursor" # [<bool>]
    #Option "NoAccel" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "WrappedFB" # [<bool>]
    #Option "GLXVBlank" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "PageFlip" # [<bool>]
    Identifier "Card1"
    Driver "nvidia"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Xorg.0.log:
    [ 2660.511]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
    [ 2660.511]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 2660.511] X Protocol Version 11, Revision 0
    [ 2660.511] Build Operating System: Linux 3.0.0-ARCH x86_64
    [ 2660.511] Current Operating System: Linux funkymonkey 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
    [ 2660.511] Kernel command line: root=/dev/sda5 ro vga=773
    [ 2660.511] Build Date: 08 August 2011 08:24:13AM
    [ 2660.511]
    [ 2660.511] Current version of pixman: 0.22.2
    [ 2660.511] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 2660.511] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2660.511] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 1 08:26:12 2011
    [ 2660.512] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2660.512] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2660.512] (==) ServerLayout "X.org Configured"
    [ 2660.512] (**) |-->Screen "Screen1" (0)
    [ 2660.512] (**) | |-->Monitor "Monitor1"
    [ 2660.512] (**) | |-->Device "Card1"
    [ 2660.512] (**) |-->Input Device "Mouse0"
    [ 2660.512] (**) |-->Input Device "Keyboard0"
    [ 2660.512] (==) Automatically adding devices
    [ 2660.512] (==) Automatically enabling devices
    [ 2660.512] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2660.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2660.512] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2660.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2660.512] Entry deleted from font path.
    [ 2660.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2660.512] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2660.512] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 2660.512] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2660.512] (WW) Disabling Mouse0
    [ 2660.512] (WW) Disabling Keyboard0
    [ 2660.512] (II) Loader magic: 0x7d3620
    [ 2660.512] (II) Module ABI versions:
    [ 2660.512] X.Org ANSI C Emulation: 0.4
    [ 2660.512] X.Org Video Driver: 10.0
    [ 2660.512] X.Org XInput driver : 12.2
    [ 2660.512] X.Org Server Extension : 5.0
    [ 2660.513] (--) PCI:*(0:0:2:0) 8086:0116:1043:15f2 rev 9, Mem @ 0xdd400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
    [ 2660.513] (--) PCI: (0:1:0:0) 10de:0df4:1043:15f2 rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 2660.513] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2660.513] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 2660.513] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 2660.513] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2660.513] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 2660.513] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 2660.513] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 2660.513] (II) LoadModule: "glx"
    [ 2660.513] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2660.520] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2660.520] compiled for 4.0.2, module version = 1.0.0
    [ 2660.520] Module class: X.Org Server Extension
    [ 2660.520] (II) NVIDIA GLX Module 280.13 Wed Jul 27 17:12:07 PDT 2011
    [ 2660.520] (II) Loading extension GLX
    [ 2660.520] (II) LoadModule: "dbe"
    [ 2660.520] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2660.520] (II) Module dbe: vendor="X.Org Foundation"
    [ 2660.520] compiled for 1.10.3.901, module version = 1.0.0
    [ 2660.520] Module class: X.Org Server Extension
    [ 2660.520] ABI class: X.Org Server Extension, version 5.0
    [ 2660.520] (II) Loading extension DOUBLE-BUFFER
    [ 2660.520] (II) LoadModule: "record"
    [ 2660.520] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2660.520] (II) Module record: vendor="X.Org Foundation"
    [ 2660.520] compiled for 1.10.3.901, module version = 1.13.0
    [ 2660.520] Module class: X.Org Server Extension
    [ 2660.520] ABI class: X.Org Server Extension, version 5.0
    [ 2660.520] (II) Loading extension RECORD
    [ 2660.520] (II) LoadModule: "dri2"
    [ 2660.521] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2660.521] (II) Module dri2: vendor="X.Org Foundation"
    [ 2660.521] compiled for 1.10.3.901, module version = 1.2.0
    [ 2660.521] ABI class: X.Org Server Extension, version 5.0
    [ 2660.521] (II) Loading extension DRI2
    [ 2660.521] (II) LoadModule: "extmod"
    [ 2660.521] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2660.521] (II) Module extmod: vendor="X.Org Foundation"
    [ 2660.521] compiled for 1.10.3.901, module version = 1.0.0
    [ 2660.521] Module class: X.Org Server Extension
    [ 2660.521] ABI class: X.Org Server Extension, version 5.0
    [ 2660.521] (II) Loading extension MIT-SCREEN-SAVER
    [ 2660.521] (II) Loading extension XFree86-VidModeExtension
    [ 2660.521] (II) Loading extension XFree86-DGA
    [ 2660.521] (II) Loading extension DPMS
    [ 2660.521] (II) Loading extension XVideo
    [ 2660.521] (II) Loading extension XVideo-MotionCompensation
    [ 2660.521] (II) Loading extension X-Resource
    [ 2660.521] (II) LoadModule: "dri"
    [ 2660.521] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2660.521] (II) Module dri: vendor="X.Org Foundation"
    [ 2660.521] compiled for 1.10.3.901, module version = 1.0.0
    [ 2660.521] ABI class: X.Org Server Extension, version 5.0
    [ 2660.521] (II) Loading extension XFree86-DRI
    [ 2660.521] (II) LoadModule: "nvidia"
    [ 2660.521] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2660.522] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2660.522] compiled for 4.0.2, module version = 1.0.0
    [ 2660.522] Module class: X.Org Video Driver
    [ 2660.522] (II) NVIDIA dlloader X Driver 280.13 Wed Jul 27 16:55:26 PDT 2011
    [ 2660.522] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2660.522] (++) using VT number 7
    [ 2660.525] (II) Loading sub module "fb"
    [ 2660.525] (II) LoadModule: "fb"
    [ 2660.526] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2660.526] (II) Module fb: vendor="X.Org Foundation"
    [ 2660.526] compiled for 1.10.3.901, module version = 1.0.0
    [ 2660.526] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2660.526] (II) Loading sub module "wfb"
    [ 2660.526] (II) LoadModule: "wfb"
    [ 2660.526] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2660.526] (II) Module wfb: vendor="X.Org Foundation"
    [ 2660.526] compiled for 1.10.3.901, module version = 1.0.0
    [ 2660.526] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2660.526] (II) Loading sub module "ramdac"
    [ 2660.526] (II) LoadModule: "ramdac"
    [ 2660.526] (II) Module "ramdac" already built-in
    [ 2660.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2660.526] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2660.526] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2660.526] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 2660.526] (==) NVIDIA(0): RGB weight 888
    [ 2660.526] (==) NVIDIA(0): Default visual is TrueColor
    [ 2660.526] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2660.690] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2660.692] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2660.692] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 2660.692] (--) NVIDIA(0): VideoBIOS: 70.08.58.00.fe
    [ 2660.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2660.692] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 2660.692] (--) NVIDIA(0): Connected display device(s) on GeForce GT 540M at PCI:1:0:0
    [ 2660.692] (--) NVIDIA(0): CRT-0
    [ 2660.692] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2660.695] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
    [ 2660.695] (**) NVIDIA(0): enabled on all display devices.
    [ 2660.697] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 2660.697] (==) NVIDIA(0):
    [ 2660.697] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2660.697] (==) NVIDIA(0): will be used as the requested mode.
    [ 2660.697] (==) NVIDIA(0):
    [ 2660.697] (II) NVIDIA(0): Validated modes:
    [ 2660.697] (II) NVIDIA(0): "nvidia-auto-select"
    [ 2660.697] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2660.700] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2660.700] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2660.700] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2660.700] (--) Depth 24 pixmap format is 32 bpp
    [ 2660.700] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2660.700] (II) NVIDIA: access.
    [ 2660.705] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 2660.705] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 2660.705] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 2660.705] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 2660.705] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 2660.705] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 2660.705] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 2660.705] (II) NVIDIA(0): Config Options in the README.
    [ 2660.707] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 2660.748] (II) Loading extension NV-GLX
    [ 2660.803] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2660.803] (==) NVIDIA(0): Backing store disabled
    [ 2660.803] (==) NVIDIA(0): Silken mouse enabled
    [ 2660.804] (==) NVIDIA(0): DPMS enabled
    [ 2660.804] (II) Loading extension NV-CONTROL
    [ 2660.804] (II) Loading extension XINERAMA
    [ 2660.804] (II) Loading sub module "dri2"
    [ 2660.804] (II) LoadModule: "dri2"
    [ 2660.804] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2660.804] (II) Module dri2: vendor="X.Org Foundation"
    [ 2660.804] compiled for 1.10.3.901, module version = 1.2.0
    [ 2660.804] ABI class: X.Org Server Extension, version 5.0
    [ 2660.804] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2660.804] (==) RandR enabled
    [ 2660.804] (II) Initializing built-in extension Generic Event Extension
    [ 2660.804] (II) Initializing built-in extension SHAPE
    [ 2660.804] (II) Initializing built-in extension MIT-SHM
    [ 2660.804] (II) Initializing built-in extension XInputExtension
    [ 2660.804] (II) Initializing built-in extension XTEST
    [ 2660.804] (II) Initializing built-in extension BIG-REQUESTS
    [ 2660.804] (II) Initializing built-in extension SYNC
    [ 2660.804] (II) Initializing built-in extension XKEYBOARD
    [ 2660.804] (II) Initializing built-in extension XC-MISC
    [ 2660.804] (II) Initializing built-in extension SECURITY
    [ 2660.804] (II) Initializing built-in extension XINERAMA
    [ 2660.804] (II) Initializing built-in extension XFIXES
    [ 2660.804] (II) Initializing built-in extension RENDER
    [ 2660.804] (II) Initializing built-in extension RANDR
    [ 2660.804] (II) Initializing built-in extension COMPOSITE
    [ 2660.804] (II) Initializing built-in extension DAMAGE
    [ 2660.805] (II) Initializing extension GLX
    [ 2660.860] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 2660.860] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2660.860] (II) LoadModule: "evdev"
    [ 2660.860] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.860] (II) Module evdev: vendor="X.Org Foundation"
    [ 2660.860] compiled for 1.10.0, module version = 2.6.0
    [ 2660.860] Module class: X.Org XInput Driver
    [ 2660.860] ABI class: X.Org XInput driver, version 12.2
    [ 2660.860] (II) Using input driver 'evdev' for 'Power Button'
    [ 2660.860] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.860] (**) Power Button: always reports core events
    [ 2660.860] (**) Power Button: Device: "/dev/input/event3"
    [ 2660.860] (--) Power Button: Found keys
    [ 2660.860] (II) Power Button: Configuring as keyboard
    [ 2660.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 2660.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 2660.860] (**) Option "xkb_rules" "evdev"
    [ 2660.860] (**) Option "xkb_model" "evdev"
    [ 2660.860] (**) Option "xkb_layout" "us"
    [ 2660.881] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 2660.881] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2660.881] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2660.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.881] (**) Video Bus: always reports core events
    [ 2660.881] (**) Video Bus: Device: "/dev/input/event8"
    [ 2660.881] (--) Video Bus: Found keys
    [ 2660.881] (II) Video Bus: Configuring as keyboard
    [ 2660.881] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
    [ 2660.881] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 2660.881] (**) Option "xkb_rules" "evdev"
    [ 2660.881] (**) Option "xkb_model" "evdev"
    [ 2660.881] (**) Option "xkb_layout" "us"
    [ 2660.885] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 2660.885] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2660.885] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2660.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.885] (**) Video Bus: always reports core events
    [ 2660.885] (**) Video Bus: Device: "/dev/input/event7"
    [ 2660.885] (--) Video Bus: Found keys
    [ 2660.885] (II) Video Bus: Configuring as keyboard
    [ 2660.885] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input7/event7"
    [ 2660.885] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 2660.885] (**) Option "xkb_rules" "evdev"
    [ 2660.885] (**) Option "xkb_model" "evdev"
    [ 2660.885] (**) Option "xkb_layout" "us"
    [ 2660.886] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2660.886] (II) No input driver/identifier specified (ignoring)
    [ 2660.886] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 2660.886] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2660.886] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 2660.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.886] (**) Sleep Button: always reports core events
    [ 2660.886] (**) Sleep Button: Device: "/dev/input/event2"
    [ 2660.886] (--) Sleep Button: Found keys
    [ 2660.886] (II) Sleep Button: Configuring as keyboard
    [ 2660.886] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 2660.887] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 2660.887] (**) Option "xkb_rules" "evdev"
    [ 2660.887] (**) Option "xkb_model" "evdev"
    [ 2660.887] (**) Option "xkb_layout" "us"
    [ 2660.889] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event12)
    [ 2660.889] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
    [ 2660.889] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
    [ 2660.889] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.889] (**) USB 2.0 Camera: always reports core events
    [ 2660.889] (**) USB 2.0 Camera: Device: "/dev/input/event12"
    [ 2660.889] (--) USB 2.0 Camera: Found keys
    [ 2660.889] (II) USB 2.0 Camera: Configuring as keyboard
    [ 2660.889] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event12"
    [ 2660.889] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
    [ 2660.889] (**) Option "xkb_rules" "evdev"
    [ 2660.889] (**) Option "xkb_model" "evdev"
    [ 2660.889] (**) Option "xkb_layout" "us"
    [ 2660.890] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
    [ 2660.890] (II) No input driver/identifier specified (ignoring)
    [ 2660.890] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
    [ 2660.890] (II) No input driver/identifier specified (ignoring)
    [ 2660.890] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event9)
    [ 2660.890] (II) No input driver/identifier specified (ignoring)
    [ 2660.895] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
    [ 2660.895] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2660.895] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
    [ 2660.895] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.895] (**) Asus WMI hotkeys: always reports core events
    [ 2660.895] (**) Asus WMI hotkeys: Device: "/dev/input/event5"
    [ 2660.895] (--) Asus WMI hotkeys: Found keys
    [ 2660.895] (II) Asus WMI hotkeys: Configuring as keyboard
    [ 2660.895] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input5/event5"
    [ 2660.895] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD)
    [ 2660.895] (**) Option "xkb_rules" "evdev"
    [ 2660.895] (**) Option "xkb_model" "evdev"
    [ 2660.895] (**) Option "xkb_layout" "us"
    [ 2660.895] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2660.895] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2660.895] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2660.895] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2660.895] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2660.895] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2660.895] (--) AT Translated Set 2 keyboard: Found keys
    [ 2660.895] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2660.895] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2660.895] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 2660.895] (**) Option "xkb_rules" "evdev"
    [ 2660.895] (**) Option "xkb_model" "evdev"
    [ 2660.895] (**) Option "xkb_layout" "us"
    [ 2660.896] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 2660.896] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2660.896] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 2660.896] (II) LoadModule: "synaptics"
    [ 2660.896] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2660.896] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2660.896] compiled for 1.10.2, module version = 1.4.1
    [ 2660.896] Module class: X.Org XInput Driver
    [ 2660.896] ABI class: X.Org XInput driver, version 12.2
    [ 2660.896] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 2660.896] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2660.896] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2660.896] (**) Option "Device" "/dev/input/event6"
    [ 2660.989] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762
    [ 2660.989] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902
    [ 2660.989] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 2660.989] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 2660.989] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 2660.989] (**) Option "TapButton1" "1"
    [ 2660.989] (**) Option "TapButton2" "2"
    [ 2660.989] (**) Option "TapButton3" "3"
    [ 2661.093] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 2661.093] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2661.199] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
    [ 2661.199] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 2661.199] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 2661.199] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 2661.199] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 2661.200] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2661.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 2661.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2661.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2661.200] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 2661.200] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2661.200] (II) No input driver/identifier specified (ignoring)
    [ 2661.200] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2661.200] (II) No input driver/identifier specified (ignoring)
    Thanks a lot in advance
    Last edited by kandalf (2011-09-01 14:34:56)

  • Custom 2.6.17 kernel and nvidia.

    hey everyone.
    i've compiled my own 2.6.17.1 kernel from abs and also built the nvidia and nvidia-utils packages for that cause, but since, there is a "extra/nvidia 1.0.8762-4" package and my version is only "local/nvidia 1.0.8762-1" pacman wants to update. the problem: modprobe won't let me insert the "-4" module. is there a convenient way to circument that problem?

    eNTi wrote:
    hey everyone.
    i've compiled my own 2.6.17.1 kernel from abs and also built the nvidia and nvidia-utils packages for that cause, but since, there is a "extra/nvidia 1.0.8762-4" package and my version is only "local/nvidia 1.0.8762-1" pacman wants to update. the problem: modprobe won't let me insert the "-4" module. is there a convenient way to circument that problem?
    1) rename your nvidia package (for example nvidia-custom)
    2) you don't have to rebuild nvidia-utils
    3) this all has nothing to do with the module not being inserted. if you would report the error message, maybe someone could help you.

  • Sever issue with Xorg and Nvidia Drivers

    I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
    X Window System Version 7.2.0
    Release Date: 22 January 2007
    X Protocol Version 11, Revision 0, Release 7.2
    Build Operating System: UNKNOWN
    Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
    Build Date: 27 February 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "AOC 7F+"
    (**) | |-->Device "NVIDIA 6200"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (**) FontPath set to:
    /usr/share/fonts/misc
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81c34a0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.1
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
    (II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
    (II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
    (II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
    [1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
    [2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
    [4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
    [6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
    [8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
    [9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
    [10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
    [1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
    [2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
    [4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
    [6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
    [8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
    [9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
    [10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
    [5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
    [6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
    [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
    [14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
    [15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
    [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.2.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.9755
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.9755
    Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="NVIDIA Corporation"
    compiled for 7.1.99.2, module version = 1.0.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules//libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.1
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
    [5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
    [6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
    [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
    [14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
    [15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
    [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
    [5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
    [6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
    [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
    [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
    [17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
    [18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
    [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
    (--) NVIDIA(0): AOC Spectrum7F (CRT-0)
    (--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    (--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
    [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
    [2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
    [8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
    [9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
    [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
    [20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
    [21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
    [22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
    [23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) NVIDIA(0): Setting mode "1024x768"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "Protocol" "Auto"
    (**) Mouse1: Device: "/dev/input/mice"
    (**) Mouse1: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse1: Buttons: 11
    (**) Option "CoreKeyboard"
    (**) Keyboard1: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard1: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard1: XkbRules: "xorg"
    (**) Option "XkbModel" "pc104"
    (**) Keyboard1: XkbModel: "pc104"
    (**) Option "XkbLayout" "us"
    (**) Keyboard1: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard1: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse1: ps2EnableDataReporting: succeeded
    FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

    No ... the problem is in the kernel that comes precompiled.
    I did this test.
    The first time I installed the kernel I unloaded nvidiafb since I dont like it.
    When I install nvidiafb back something strange happends. Nvidia module fails to load.
    The modprobe sais it cannot find the device nvidia.ko ... but it is there!
    So my best guess is, there is something with the kernel. Any ideas?
    Problem resolved, installed older driver
    Last edited by Nefer-Ra (2007-03-22 02:59:25)

  • Installing Mavericks cause Kernel Panic and after installing too

    Hi,
    I worked with Mountain Lion and all was good, but I thought that would be nice to update to Mavericks.
    And I'm not good in Mac OS, so I didn't prepare backup before, because believed that it have to work.
    But during installation I got kernel panic several times, yeah. But installation process was continued and finally Mavericks was installed.
    I was happy, but I shouldn't.
    From time to time I'm getting kernel panic and I don't know what is reason.
    The worst things that I can't rollback to ML, because for some reason Mavericks installing instead.
    And I did clean install several times, and did cleaning NVRAM and PRAM, but it all didn't help to me.
    I haven't Apple Support in my country, so I can't even come to service center.
    And my last hope is your support.
    Could you please look on a kernel panic log and say me what is wrong with it?
    Anonymous UUID:  
    CB0D1011-3613-05A6-5015-9ABF6A5C5764
    Sun Dec  8 22:57:24 2013
    panic(cpu 1 caller 0xffffff80074dc19e): Kernel trap at 0xffffff7f8934696c, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffef7f8936c9b8, CR3: 0x000000000a169000, CR4: 0x0000000000000660
    RAX: 0x0fffffc5f76d0000, RBX: 0xffffef7f8936c9b0, RCX: 0x0000000000000001, RDX: 0x000003a0892cfa12
    RSP: 0xffffff80efc03d80, RBP: 0xffffff80efc03e70, RSI: 0x000003c0892c668c, RDI: 0xffffff80e8eed148
    R8:  0x00000000e0000000, R9:  0x0000000000000005, R10: 0x00000000ffffffff, R11: 0xffffffffffffffff
    R12: 0xffffff801937f800, R13: 0x0000000000000005, R14: 0xffffff80e8eed148, R15: 0xffffff7f8936ae20
    RFL: 0x0000000000010006, RIP: 0xffffff7f8934696c, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffef7f8936c9b8, Error code: 0x0000000000000002, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80efc03a10 : 0xffffff8007422f69
    0xffffff80efc03a90 : 0xffffff80074dc19e
    0xffffff80efc03c60 : 0xffffff80074f3606
    0xffffff80efc03c80 : 0xffffff7f8934696c
    0xffffff80efc03e70 : 0xffffff7f89345b89
    0xffffff80efc03f30 : 0xffffff80074dda5c
    0xffffff80efc03f50 : 0xffffff800743757a
    0xffffff80efc03f90 : 0xffffff80074378c8
    0xffffff80efc03fb0 : 0xffffff80074d6aa7
    Kernel Extensions in backtrace:
    com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10E D6F331236]@0xffffff7f89343000->0xffffff7f8936dfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:
    0x0000000007200000
    Kernel text base: 0xffffff8007400000
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 6087597184120
    last loaded kext at 734223625091: com.apple.filesystems.smbfs
    2.0.0 (addr 0xffffff7f89736000, size 335872)
    last unloaded kext at 317416816502: com.apple.filesystems.msdosfs
    1.9 (addr 0xffffff7f89736000, size 57344)
    loaded kexts:
    com.apple.filesystems.smbfs
    2.0.0
    com.apple.filesystems.autofs
    3.0
    com.apple.driver.AppleHWSensor
    1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager
    4.2.0f6
    com.apple.driver.AudioAUUC
    1.60
    com.apple.driver.AGPM
    100.14.11
    com.apple.driver.AppleMikeyHIDDriver
    124
    com.apple.driver.AppleHDA
    2.5.2fc2
    com.apple.iokit.IOUserEthernet
    1.0.0d1
    com.apple.driver.AppleMikeyDriver
    2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X
    7.0.0
    com.apple.driver.AppleHWAccess
    1
    com.apple.driver.ACPI_SMC_PlatformPlugin
    1.0.0
    com.apple.driver.AppleLPC
    1.7.0
    com.apple.driver.AppleSMCLMU
    2.0.4d1
    com.apple.GeForceTesla
    8.1.8
    com.apple.driver.AppleUpstreamUserClient
    3.5.13
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
    4.2.0f6
    com.apple.driver.AppleBacklight
    170.3.5
    com.apple.driver.AppleMCCSControl
    1.1.12
    com.apple.driver.SMCMotionSensor
    3.0.4d1
    com.apple.driver.AppleUSBTCButtons
    240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
    1.0.0d1
    com.apple.BootCache
    35
    com.apple.driver.AppleUSBTCKeyboard
    240.2
    com.apple.driver.AppleIRController
    325.7
    com.apple.driver.AppleUSBCardReader
    3.3.5
    com.apple.iokit.SCSITaskUserClient
    3.6.0
    com.apple.driver.XsanFilter
    404
    com.apple.iokit.IOAHCIBlockStorage
    2.4.0
    com.apple.driver.AirPort.Brcm4331
    700.20.22
    com.apple.driver.AppleFWOHCI
    4.9.9
    com.apple.driver.AppleUSBHub
    650.4.4
    com.apple.driver.AppleAHCIPort
    2.9.5
    com.apple.nvenet
    2.0.21
    com.apple.driver.AppleUSBOHCI
    650.4.1
    com.apple.driver.AppleUSBEHCI
    650.4.1
    com.apple.driver.AppleSmartBatteryManager
    161.0.0
    com.apple.driver.AppleRTC
    2.0
    com.apple.driver.AppleHPET
    1.8
    com.apple.driver.AppleACPIButtons
    2.0
    com.apple.driver.AppleSMBIOS
    2.0
    com.apple.driver.AppleACPIEC
    2.0
    com.apple.driver.AppleAPIC
    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient
    216.0.0
    com.apple.nke.applicationfirewall
    153
    com.apple.security.quarantine
    3
    com.apple.driver.AppleIntelCPUPowerManagement
    216.0.0
    com.apple.kext.triggers
    1.0
    com.apple.iokit.IOSerialFamily
    10.0.7
    com.apple.AppleGraphicsDeviceControl
    3.4.12
    com.apple.driver.DspFuncLib
    2.5.2fc2
    com.apple.vecLib.kext
    1.0.0
    com.apple.iokit.IOAudioFamily
    1.9.4fc11
    com.apple.kext.OSvKernDSPLib
    1.14
    com.apple.iokit.IOSurface
    91
    com.apple.iokit.IOBluetoothFamily
    4.2.0f6
    com.apple.driver.IOPlatformPluginLegacy
    1.0.0
    com.apple.driver.AppleSMBusPCI
    1.0.12d1
    com.apple.driver.IOPlatformPluginFamily
    5.5.1d27
    com.apple.nvidia.classic.NVDANV50HalTesla
    8.1.8
    com.apple.nvidia.classic.NVDAResmanTesla
    8.1.8
    com.apple.iokit.IOBluetoothHostControllerUSBTransport
    4.2.0f6
    com.apple.iokit.IOFireWireIP
    2.2.5
    com.apple.driver.AppleHDAController
    2.5.2fc2
    com.apple.iokit.IOHDAFamily
    2.5.2fc2
    com.apple.driver.AppleBacklightExpert
    1.0.4
    com.apple.driver.AppleSMBusController
    1.0.11d1
    com.apple.iokit.IONDRVSupport
    2.3.6
    com.apple.iokit.IOGraphicsFamily
    2.3.6
    com.apple.driver.AppleSMC
    3.1.6d1
    com.apple.driver.AppleUSBMultitouch
    240.6
    com.apple.iokit.IOUSBHIDDriver
    650.4.4
    com.apple.iokit.IOSCSIBlockCommandsDevice
    3.6.0
    com.apple.iokit.IOUSBMassStorageClass
    3.6.0
    com.apple.driver.AppleUSBMergeNub
    650.4.0
    com.apple.driver.AppleUSBComposite
    650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice
    3.6.0
    com.apple.iokit.IOBDStorageFamily
    1.7
    com.apple.iokit.IODVDStorageFamily
    1.7.1
    com.apple.iokit.IOCDStorageFamily
    1.7.1
    com.apple.iokit.IOAHCISerialATAPI
    2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily
    3.6.0
    com.apple.iokit.IO80211Family
    600.34
    com.apple.iokit.IOFireWireFamily
    4.5.5
    com.apple.iokit.IOUSBUserClient
    650.4.4
    com.apple.iokit.IOAHCIFamily
    2.6.0
    com.apple.iokit.IONetworkingFamily
    3.2
    com.apple.iokit.IOUSBFamily
    650.4.4
    com.apple.driver.NVSMU
    2.2.9
    com.apple.driver.AppleEFINVRAM
    2.0
    com.apple.driver.AppleEFIRuntime
    2.0
    com.apple.iokit.IOHIDFamily
    2.0.0
    com.apple.iokit.IOSMBusFamily
    1.1
    com.apple.security.sandbox
    278.10
    com.apple.kext.AppleMatch
    1.0.0d1
    com.apple.security.TMSafetyNet
    7
    com.apple.driver.AppleKeyStore
    2
    com.apple.driver.DiskImages
    371.1
    com.apple.iokit.IOStorageFamily
    1.9
    com.apple.iokit.IOReportFamily
    21
    com.apple.driver.AppleFDEKeyStore
    28.30
    com.apple.driver.AppleACPIPlatform
    2.0
    com.apple.iokit.IOPCIFamily
    2.8
    com.apple.iokit.IOACPIFamily
    1.4
    com.apple.kec.corecrypto
    1.0
    com.apple.kec.pthread
    1
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: ST9500420AS, 500,11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: Built-in iSight
    USB Device: Internal Memory Card Reader
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: IR Receiver
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus:

    Oksan wrote:
    Sun Dec  8 22:57:24 2013
    panic(cpu 1 caller 0xffffff80074dc19e): Kernel trap at 0xffffff7f8934696c, type 14=page fault, registers:
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    1333 MHz is the wrong memory.
    Your Mid 2009 MacBook Pro 5,5 uses PC3-8500 1066 MHz Memory....?
    see > MacBook Pro (13-inch, Mid 2009) - Technical Specifications
    and > MacBook Pro: How to remove or install memory
    or > How to Upgrade MacBook Pro RAM (2009, 2010, 2011, 2012)

  • Mac Pro 3.1 (early 2008) and nVIDIA Quadro FX5600

    Hi all,
    I am triying to install nVIDIA Quadro FX5600 on a Mac Pro 3.1 (early 2008).
    Well, indeed I have been using this graphics card in this computer already, however, a few hours after installing the card, I updated the Mac OS, and there began the problems.
    Characteristics:
    -Mac Pro 3.1 (early 2008)
    -2 x 2,8 GHz Quad-Core Intel Xeon
    -12GB 800 MHz DDR2 FB-DIMM
    Graphics cards:
    -slot 1: ATI Radeon HD 2600 XT
    -slot 2: nVIDIA Quadro FX5600
    The story is a little bit long, however I think it is important to give the maximum information:
    1-I purchased the nVIDIA Quadro FX5600, and took the computer and the card to an apple reseller to install it.
    2-They installedit, physically, in slot 2, and left in slot 1 the ATI Radeon, the card included in the computer when I purchased it.
    3-They told me that after installing the drivers in Mac OS 10.10.2, when restarting the computer after installing, they had kernel panic problems.
    4-They installed the card in another Mac computer with Mac OS 10.9.5 to check if the card was compatible with Mac, and it worked perfectly.
    5-And finally, "they say", that they repeated the same operation than in point 2 and 3, also in my computer, and this time they didn't have kernel panic problems. So I took the computer at home, ready to use my new graphics card
    6-When I arrived at home, I worked about 4/5 hours with the computer, and before ending the day and closing the computer, I installed two Mac updates. One of them was a security update and the other one an iMovie update. The first one worked, however the iMovie one didn't, it gave an error. I decided to give no importance and close the app store.
    7-Just after closing the app store, it appeared a message from nVidia controller, saying that there was a new update. So I install it, and once installed, it recommended to restart the computer, so I restarted.
    8-When the computer restarted, before loading the Mac OS desktop, they appeared the kernel panic problems, and seconds after the computer restarted automatically again. The same thing continuosly, all the time.
    9-The computer's disk is divided into two parts, Mac OS and Windows 7 professional. So I decided to erase all the content in the Mac OS part and install the OS 10.10.2 again from zero (I have a copy in time machine of all my documents).
    10-Once Mac OS 10.10.2 (14C1510) installed again, I have installed the Quadro & Geforce Mac OS X driver release 343.02.02 again which is the driver compatible with the operative system.
    11-The same problem has occured, when restarting the computer after installing the drivers, the same problem as in point 3 occurs again.
    12-I repeated the same operation as in point 9 and 10, however, this time, before restarting the computer after installing the nVIDIA drivers, I installed the CUDA 6.5.46 driver, and the same problem has occured.
    The key is that the computer has been working with this graphics card, however, the story has turned crazy...
    Anyone has experienced the same problems? Any clue about it?
    Many thanks in advanced!

    You probably read how that 10.10.2 security update changed the build number of the OS, how Apple is still using really old Nvidia driver from 10.8.2.
    So called "Security Update 2015-002" from today will purposely break nVidia drivers! ( 1 2 3)
    http://forums.macrumors.com/showthread.php?t=1853748
    Mixing ATI and Nvidia in older versions of Windows was a no-no.
    With 10.10 I would ditch the 2600XT, it is doing nothing for you except taking up a slot.
    you really just could ask and no need to drag 60 lbs and have someone else put a GPU in and attach the 6-pin aux power.
    Another site along with MacIntouch to check daily and keep your eye on:
    http://www.xlr8yourmac.com/
    Nvidia Graphics Driver Update for OS X 10.10.2 w/Security Update 2015-002
    Nvidia download page for Graphics driver 343.02.02f03 for OS X 10.10.2 (build 14C1510). Here's a clip from the main D/L page tab (other than version info typical boilerplate).
    "New in Release 343.02.02f03
    Graphics driver updated for OS X Yosemite 10.10.2 (14C1510) Contains performance improvements and bug fixes for a wide range of applications.
    Includes NVIDIA Driver Manager preference pane."
    See linked page for more info. (As of March 12th post date still links to Cuda 6.5.46 from January 28th but that could change.)

  • IMac keeps freezing - kernel panics and other

    My iMac keeps freezing on me. Sometimes I get a notice that my computer experience a kernel panic and upon restart have the option of sending the info to Apple, other times it just feezes and I have to do a hard restart but get no prompts about the improper shutdown. This usually happens when I'm working in Adobe Premiere Pro and Adobe After Effects at the same time.
    Am I just overloading the system? And if so, why would it allow me to do that? Shouldn't it just run really slowly or have one application freeze, not the entire system? This hasn't been a problem in the past, it just recently started happening more and more often. Do I need more Ram? That's pretty much the only thing I can upgrade. Here are my system specs, please let me know if you have any suggestions for things I can do to prevent this from happening again. Thank you!

    Thanks for the replies. Baltwo I'll try running those test and see if they find anything.
    Here's a recent Kernel panic log:
    Anonymous UUID:       052529F7-3E96-7D93-EE57-F11E2985864C
    Mon Apr 14 10:40:57 2014
    panic(cpu 2 caller 0xffffff7fa3a4e241): NVRM[0/1:0:0]: Read Error 0x00100c80: CFG 0x11a310de 0x00100406 0xb0000000, BAR0 0x102c00000 0xffffff81faa66000 0x0e4230a2, D0, P2/4
    Backtrace (CPU 2), Frame : Return Address
    0xffffff803ae33450 : 0xffffff8023022fa9
    0xffffff803ae334d0 : 0xffffff7fa3a4e241
    0xffffff803ae33590 : 0xffffff7fa3b18106
    0xffffff803ae335d0 : 0xffffff7fa3ce7b09
    0xffffff803ae33640 : 0xffffff7fa3ce7938
    0xffffff803ae336a0 : 0xffffff7fa3c8469e
    0xffffff803ae33740 : 0xffffff7fa3c80fae
    0xffffff803ae337e0 : 0xffffff7fa3c80af8
    0xffffff803ae33840 : 0xffffff7fa3b670e8
    0xffffff803ae338d0 : 0xffffff7fa3d30bae
    0xffffff803ae33940 : 0xffffff7fa3d26b16
    0xffffff803ae33a10 : 0xffffff7fa3d26edf
    0xffffff803ae33a80 : 0xffffff7fa3b8bbbc
    0xffffff803ae33bd0 : 0xffffff7fa3b8b5b1
    0xffffff803ae33ce0 : 0xffffff7fa3b8f189
    0xffffff803ae33d30 : 0xffffff7fa3d54bf3
    0xffffff803ae33da0 : 0xffffff7fa3b8edb1
    0xffffff803ae33e20 : 0xffffff7fa3a36aea
    0xffffff803ae33ee0 : 0xffffff7fa3a04635
    0xffffff803ae33f20 : 0xffffff802304a23a
    0xffffff803ae33fb0 : 0xffffff80230d6ff7
          Kernel Extensions in backtrace:
             com.apple.nvidia.driver.NVDAResman(8.2.4)[3D591202-DD24-3441-925A-F6808ABDF185] @0xffffff7fa39fe000->0xffffff7fa3c62fff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7fa36bb000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7fa39ee000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7fa39ab000
             com.apple.nvidia.driver.NVDAGK100Hal(8.2.4)[ACFCEA0C-4C80-36C0-8636-D10EE7D2DE1 7]@0xffffff7fa3c6d000->0xffffff7fa3e19fff
                dependency: com.apple.nvidia.driver.NVDAResman(8.2.4)[3D591202-DD24-3441-925A-F6808ABDF185] @0xffffff7fa39fe000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7fa36bb000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13C64
    Kernel version:
    Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide:     0x0000000022e00000
    Kernel text base: 0xffffff8023000000
    System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
    System uptime in nanoseconds: 163806849337921
    last loaded kext at 17058727564: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7fa508d000, size 36864)
    loaded kexts:
    com.nvidia.CUDA          1.1.0
    com.Cycling74.driver.Soundflower          1.5.1
    com.logmein.driver.LogMeInSoundDriver          1.0.3
    com.promise.driver.stex          5.2.7
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleMikeyDriver          2.6.0f1
    com.apple.driver.AGPM          100.14.15
    com.apple.driver.ApplePlatformEnabler          2.0.9d1
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
    com.apple.driver.AppleHDA          2.6.0f1
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.GeForce          8.2.4
    com.apple.driver.AppleMuxControl          3.4.35
    com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.AppleIntelHD4000Graphics          8.2.4
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.nvidia.NVDAStartup          8.2.4
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleThunderboltIP          1.1.2
    com.apple.driver.AppleIntelMCEReporter          104
    com.apple.driver.AppleIntelFramebufferCapri          8.2.4
    com.apple.iokit.SCSITaskUserClient          3.6.6
    com.apple.driver.CoreStorageFsck          380
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.5.1
    com.apple.driver.AppleUSBHub          666.4.0
    com.apple.driver.AppleSDXC          1.5.2
    com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          3.0.0
    com.apple.driver.AppleUSBEHCI          660.4.0
    com.apple.driver.AppleUSBXHCI          670.4.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.1
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOBluetoothFamily          4.2.3f10
    com.apple.driver.DspFuncLib          2.6.0f1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.5fc2
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOAcceleratorFamily          98.14
    com.apple.nvidia.driver.NVDAGK100Hal          8.2.4
    com.apple.nvidia.driver.NVDAResman          8.2.4
    com.apple.driver.AppleGraphicsControl          3.4.35
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IONDRVSupport          2.4.1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.iokit.IOFireWireIP          2.2.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.driver.AppleHDAController          2.6.0f1
    com.apple.iokit.IOHDAFamily          2.6.0f1
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleSMC          3.1.8
    com.apple.driver.IOPlatformPluginFamily          5.7.0d10
    com.apple.iokit.IOAcceleratorFamily2          98.14
    com.apple.AppleGraphicsDeviceControl          3.4.35
    com.apple.iokit.IOGraphicsFamily          2.4.1
    com.apple.driver.AppleThunderboltEDMSink          2.1.3
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.iokit.IOUSBHIDDriver          660.4.0
    com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
    com.apple.driver.AppleThunderboltPCIUpAdapter          1.4.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          656.4.1
    com.apple.driver.CoreStorage          380
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOSCSIParallelFamily          3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
    com.apple.driver.AppleThunderboltNHI          2.0.1
    com.apple.iokit.IOThunderboltFamily          3.2.7
    com.apple.iokit.IOEthernetAVBController          1.0.3b4
    com.apple.driver.mDNSOffloadUserClient          1.0.1b5
    com.apple.iokit.IO80211Family          630.35
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOUSBUserClient          660.4.2
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.iokit.IOUSBFamily          675.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    System Profile:
    Model: iMac13,2, BootROM IM131.010A.B05, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 2.11f14
    Graphics: NVIDIA GeForce GTX 680MX, NVIDIA GeForce GTX 680MX, PCIe, 2048 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1600 MHz, 0x85F7, 0x483634353155363746313630304700000000
    Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1600 MHz, 0x85F7, 0x483634353155363746313630304700000000
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    PCI Card: pci105a,8760, RAID Controller, Thunderbolt@192,0,0
    PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@196,0,0
    Serial ATA Device: APPLE HDD WDC WD10EALX-408EA0, 1 TB
    Serial ATA Device: APPLE SSD SM128E, 121.33 GB
    USB Device: Rugged USB3-FW
    USB Device: USB-SATA Bridge
    USB Device: Hub
    USB Device: Hub
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Hub
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: iMac, Apple Inc., 23.4
    Thunderbolt Device: Pegasus R-Series, Promise Technology, Inc., 1, 22.2

  • Want nvidia and nvidia-utils-169.12-1-i686.pkg.tar.gz !!

    After upgrade nvidia and nvidia-utils, my screen turned black.
    Need to downgrade, but I can't find the packages,
    Please help!!
    AMD64 3000+
    GF6100
    2G ram
    seagate 250G

    http://repos.archlinux.org/viewvc.cgi/n … iew=markup
    That might be your best bet.  I thought I had an even older version in my cache, but unfortunately I must have deleted it a few days ago.  Sorry.
    Edit: Did you by chance upgrade your kernel, too?  A few times I've had trouble when upgrading the kernel.  Try reinstalling (perhaps uninstalling and reinstalling) the nvidia drivers, or try "modprobe nvidia" as root.  Hopefully one of them will do it for you.  But then again, if you're not getting errors from X and you just have a black screen, I doubt either of those will do it.
    Good luck.
    Last edited by tonyisnt (2008-09-05 05:33:05)

Maybe you are looking for