Kernel Missing or corrupt

I have a Satellite L505-S5983 and Wind 7. When I try booting it up it s there is a status error oxc0000098 and a kernel is missing or corrupt. I do not have a disk to reinstall as it came preloaded. I have tried holding down the o key while booting which worked for a different issue but it will not work now. Any help?

Satellite L505-S5983
Probably this one.
Satellite L505D-S5983
If you failed to burn a system repair disc, get one here. Scroll down to the following link, download the ISO file, and burn the disc.
•Windows 7 System Repair Disc 32-bit
You can use that to reach the Windows Recovery Environment and peform a Startup Repair.
-Jerry

Similar Messages

MacBook Windows7 install failing - ntkrnlpa.exe - "Windows failed to load because the kernel is missing, or corrupt."

Trying to do BootCamp Windows-7 install on my MacBook (running 10.5.x).
Detailed progress notes here. Latest: "Windows failed to load because the kernel is missing, or corrupt." (ntkrnlpa.exe) Hit `Enter` to continue, make next selection, but it comes back to error message. So shut down (power button) then reboot with Windows DVD still in there. Ended up with same error!

Best thing to do is nuke the drive, then reinstall Vista again.
I know this is a long process but should get you back running again.
Linux makes odd partitions that recovery does not understand and they don't get deleted properly, boot and nuke will take care of that.

Problem with installing OS. hal.dll missing or corrupt

I feel I have a hardware issue with this laptop. It is a M115-S3095. I had XP home installed but had driver issues. Now I have the recovery disk with it I get "Error 10DD0A0057". One time I did get my retail XP copy to install it gave me "hal.dll is missing or corrupt". To add to the mix I can not boot a Linux OS Disk. It just get to the installing logo and thats it. The hard drive has been tested good , Memory check was good. So just to pick brains and I know some of you know alot more than me...Do we need a motherboard replacement ? I work on alot of laptops and this is a new one on me. Thanks in advance for any input.

> On Thu, 28 Sep 2006 17:18:05 GMT, [email protected] wrote:
>
> > I've tried creating a completely new image , it also seems to happen if we
> > use the image to reimage the exact same computer ( no hardware
> > diffrences)... any ideas?
>
> did it work before? what has changed?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net
yes , on one computer we have used that image before without any other
problems. The computer we are using is the exact same model as the one we
used to take the image from.
In the other case we are taking a computer and imaging it to another drive
in order to replace the drive. So everything is the same , except for the
drive.

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Can't do clean install of Win 8.1 missing or corrupted winload.exe

I have an existing installation of Windows 7 Ultimate. It boots cleanly and works without errors. I'm doing a clean install of Windows 8.1 from DVD or flash drive (I've got both, both created from the downloaded ISO) to make it dual boot. I
get the error message "cannot install Windows 8.1, Windows\system32\boot\winload.exe is missing or corrupt." Both install media give the same result.
I don't understand where the winload file is supposed to be. It does not appear on the install media, and it can't have corrupted the DVD, and surely it's not using the Win7 partition, so what should I fix?
I see bunch of similar questions in various fora, but none of the answers seem to apply; to me, this smells like an unresolved issue with the Installer.
I'm dead in the water. Please help.

Hi SHCA,
What is your current situation?
Please share us the whole error message for better support.
Please check if the the ISO file is reliable as S.Sengupta mentioned.
As we have the error message about winload is missing or corrupted, we need to check if it's still exist in C:\Windows\System32\winload.exe.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Satellite Pro 4340DVD will not boot up - pci.sys missing or corrupt

I bought a Toshiba Laptop Satellite Pro 4340DVD Model # PS434C-3N152, Serial # Y0018185J, off E-Bay.
The original operating system, Win 98SE has been upgraded to Win XP Pro. No disks came with the laptop.
The laptop crashed yesterday while I was online and will not boot-up.
_Error message reads:_
+The following file is missing or corrupt: System32\DRIVERS\pci.sys.+
Any suggestions on how to rectify this problem will be deeply appreciated. I would very much like to have a users manual for this unit but haven't been able to find one.
Thanks!
Sam

Turns out that the dirty dawg was Anti-Virus 2009 that caused the problem. Managed to get laptop to boot up in "safe mode," found the dirty dawg, deleted it, and the laptop booted right back up.
This issue is resolved!
Sam

Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

"Profile is missing or corrupted." Will not start again even with fresh install.

Apparently after some kind of crash, whenever I start Firefox I receive an error message saying "Profile is missing or corrupted. Cannot be loaded" or something like that. The information about loading the Profile Manager does no good, since it presumes you can already start Firefox. It is not even allowing me to create a new profile, and downloading a new version of Firefox does not work either.

Hello tomreedtoon,
try to delete the [http://kb.mozillazine.org/Profiles.ini_file profiles.ini] file to force firefox to create a new profile, the profiles.ini file exist in firefox profile folder '''path'''
for your windows use "Start > Run" (or press "Windows key+R" to open the Run box) and type :
%APPDATA%\Mozilla\Firefox
and click "OK" to quickly open the appropriate folder
when the new profile created (after you delete the profiles.ini folder) then see:
[https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#os=win7&browser=fx22 Recovering important data from an old profile]
[http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox Transferring data to a new profile - Firefox]
thank you

Error message : "Preflight.dll is missing or corrupt"

Hi,
I'm currently converting a bunch of PDF thesis into PDF/A 1-b through an Action (batch processing). Some of them resist conversion : Acrobat displays an error message : "Preflight.dll is missing or corrupt".
If I do it manually (open the PDF document and then "Save as"-> "PDF/A") :
- for 3 of them I always get the above-mentioned error message
- for 3 others I manage to create a PDF/A 1-b version, but when I open it in Acrobat and browse through the document I get a popup telling me "Impossible to extract embedded font xxxxxxxxxxx. Some characters might be displayed or printed incorrectly" [homemade translation from french to english ;-)].
3 fonts seem to cause this problem :
RRTVUI+Calibri,Italic
ALONFR+Calibri
SAPTZM+Calibri
N.B. : I'm using a PC with Windows XP and Acrobat XI Pro v. 11.0.3
As I understand it, PDF/A 1-b norm requires all fonts to be included into the PDF file. But what happens when the author of the document used a font that I don't have on my computer ? Does it mean that in thoses cases I won't be able to create a PDF/A 1-b version for archiving purposes ?
This is all the more troubling that in one of the PDF/a 1-b with font problems, I realized that the original text has been altered (some "%" characters are not displayed at all).
At first I intended to archive only the PDF/A 1-b version of the thesis files, but now I realize that this is much more complicated than I thought : some PDF refuse to be converted (for a yet unknown reason), and some are altered in the process !
Can you please help me to find out :
- why some PDFs can't be converted to PDF/A 1-b ("Preflight.dll is missing or corrupt")
- a way to remedy the font problem ?
Thanks !

"As I understand it, PDF/A 1-b norm requires all fonts to be included into the PDF file. But what happens when the author of the document used a font that I don't have on my computer ? Does it mean that in thoses cases I won't be able to create a PDF/A 1-b version for archiving purposes ?"
Yes, and yes. You have to embed it (rules of PDF/A) and therefore you have to own it. There doesn't seem to be any way around this.
It's certainly not the case that every PDF can be made suitable for PDF/A.

Recovery Media Files are Missing or Corrupt

Computer will not refresh or reset. Reinstallation functions (Microsoft and OEM) do not work. Messages state
The Factory Recovery Partition that was included with your system is missing or corrupt. Some Features including recovery media creation, factory image restore and system backup may not work but you continue to use the application. (OEM)
Insert media
Some files are missing. Your Windows installation or recovery media will provide these files. (Microsoft)
A required drive partition is missing. (Microsoft)
Recovery drives are visible in Storage area of Computer Management of Administrative Tools.
Internet research produced evidence of a virus. Article described symptoms as prevents users and installed programs from accessing popular and security websites required for normal function, which belong to several antivirus companies, prevents programs
whose window title contains various text strings from being run, disables numerous computer functions, hides folders, makes antivirus programs inaccessible, and obtains information from the computer, such as IP address, name, geographical area, etc. Two items
specifically listed were found in the registry
HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Active Setup\DisableRepair = dword:00000001
HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Active Setup\JITSetupPage = file://%windir%\\web\\iejit.htm Phase =dword:00000006
Those entries were deleted. All items identified in the article where checked on computer. The following entries are questioned and advice is sought.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Amigo Disabled\hkcmds.exe (Graphics adapter)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Amigo Disabled\igfxpers.exe (Graphics adapter)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ForceActiveDesktopOn = dword:00000000
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoActiveDesktop = dword:00000001
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoActiveDesktopChanges = dword:00000001
Advice would be helpful.

Hi,
If you want to reset or refresh your Windows, then I'd like to share this link with you:
http://windows.microsoft.com/en-IN/windows-8/restore-refresh-reset-pc
the reason why I share it with you is that the reset and refresh situations are different depending on the system installed in your machine.
if the system does have a recovery partition, then it might be corrupted, I'm afraid that you eill need to contact the PC manufactiure for a DVD disk.
By the way, Windows 8\8.1 also has some built-in advanced recovery options, you can boot your PC into recovery console to perform some troubleshooting steps.
Yolanda Zhu
TechNet Community Support

After HD crash, restoring to new HD. Library files missing or corrupt. How can I get iTunes 10 to see my music

The hard drive on my fairly new HP Pavilion desktop died hard on boot-up. HP replaced the drive the next day. Used the Recovery Disks and got the unit up and running. I have been using Memeo Premium Backup and never did get any error messages during backup. When I went to restore the data, much of it is missing or corrupt. In the Restore data on the backup drive, I can see many folders but only a few have data. I opened a ticket with Memeo and after they made a few useless comments, they closed the ticket.
Fortunately, most of my iTunes data (folders and files) were restored in-tact. The exceptions were the library files, which are missing. The library files in the Previous Itunes Library folder were corrupted. I installed iTunes 10, but there are no songs, podcasts,etc, in it. I have tried every article in the knowledgebase and tried to fix the ITL and XML files, but it is hopeless. Also, when iTunes is running, at the top it shows .iTunes Preferences.plist. So, I have a disaster and about 10 gb of music going nowhere. Any ideas? I would really appreciate any help I can get.
Brad

They are all mostly the same size at around 6MB but there are a couple that are very large 55MB (including the 30 tmp file I mentioned above. There is also one around 7KB). I tried renaming the most recent (as of 8:30PM last night) tmp file as iTunes Library.itl but when I launch iTunes, I get the "The file 'iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" popup.
But when I go into a directory I created to get the most recent itl file I've been saving as a backup and copy it into the iTunes directory to replace the one that I tried to make with the tmp file, and launch iTunes, my whole library loads with no problem.
However, if history repeats itself, this will work for at most a couple of days before I have to copy the saved itl file back into the iTunes directory.

Re: Satellite A300D: winload.exe missing or corrupt

Hi
I tried to make recovery to my system by using F8 and its works but suddenly the battry fail during the opration,
So i repated the steps again after i connect the charger but i coudn't, and i received the message...
+Windows failed to start. A recent hardware or software change might be the+
+cause. . .+
+File: \Windows\system32\winload.exe+
+Status:0xc000000f+
+Info: The selected entry could not be loaded because the application is+
+missing or corrupt.+
And i havent dvd recovery to make ther recovery from dvd,
I need help to fix this problem if there is any idea????
My laptop A300D toshiba satellite

Hi
You mean you are not able to recover the notebook using the HDD recovery procedure?
You can start the HDD procedure pressing F8, choosing option Repair my Computer.
Then a new window should appear and there you could choose a new option called Toshiba HDD recovery.
If this is not possible then I believe that you have no other choice as reinstall the OS using an installation disk (Microsoft or Toshiba).
If you dont have such disk then you order it from this website:
https://backupmedia.toshiba.eu/landing.aspx
Cheers

Datafile not restored due to missing or corrupt data

Hi all,
I was asked to restore a RMAN backup which we got from another region, the rman backup contains controlfiles and datafiles as compressed backupset.
oracle version is 10.2.0.3.0
aix version 6
First, I have restored the control file using the below command:
run
+{+
allocate channel t1 type disk;
restore controlfile from '/oracle/app/prod/rman/cf_t799873684_s17_p1';
alter database mount;
+}+
Second, I have cataloged the backup piece:
catalog backuppiece '/oracle/app/prod/rman/df_t794754324_s12_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t793567544_s13_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t731097654_s14_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t792538698_s15_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t792183472_s16_p1';
catalog backuppiece '/oracle/app/prod/rman/cf_t799873684_s17_p1';
Third, used below command to restore:
+run {+
allocate channel t1 type disk;
allocate channel t2 type disk;
allocate channel t3 type disk;
allocate channel t4 type disk;
set newname for datafile 01 to '/oracle/app/oradata/dbprod/system01.dbf';
set newname for datafile 02 to '/oracle/app/oradata/dbprod/undotbs01.dbf';
set newname for datafile 03 to '/oracle/app/oradata/dbprod/sysaux01.dbf';
set newname for datafile 04 to '/oracle/app/oradata/dbprod/users01.dbf';
set newname for datafile 06 to '/oracle/app/oradata/dbprod/datafile005.dbf';
set newname for datafile 07 to '/oracle/app/oradata/dbprod/datafile006.dbf';
set newname for datafile 08 to '/oracle/app/oradata/dbprod/datafile007.dbf';
set newname for datafile 09 to '/oracle/app/oradata/dbprod/datafile008.dbf';
set newname for datafile 10 to '/oracle/app/oradata/dbprod/datafile009.dbf';
set newname for datafile 11 to '/oracle/app/oradata/dbprod/datafile010.dbf';
set newname for datafile 14 to '/oracle/app/oradata/dbprod/datafile001.dbf';
set newname for datafile 15 to '/oracle/app/oradata/dbprod/datafile002.dbf';
set newname for datafile 16 to '/oracle/app/oradata/dbprod/datafile003.dbf';
set newname for datafile 17 to '/oracle/app/oradata/dbprod/datafile004.dbf';
set newname for datafile 18 to '/oracle/app/oradata/dbprod/indfile001.dbf';
set newname for datafile 19 to '/oracle/app/oradata/dbprod/indfile002.dbf';
set newname for datafile 20 to '/oracle/app/oradata/dbprod/indfile011.dbf';
restore database;
switch datafile all;
recover database;
+}+
But while restoring, I got error like below:
Starting restore at 22-OCT-12
channel t1: starting datafile backupset restore
channel t1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /glotam3/oracle10g/oradata/T24DEV3/users01.dbf
restoring datafile 00007 to /glotam3/oracle10g/oradata/T24DEV3/datafile006.dbf
restoring datafile 00011 to /glotam3/oracle10g/oradata/T24DEV3/datafile010.dbf
restoring datafile 00012 to /glotam3/oracle10g/oradata/T24DEV3/recop01.dbf
restoring datafile 00014 to /glotam3/oracle10g/oradata/T24DEV3/datafile001.dbf
channel t1: reading from backup piece /oracle/app/prod/rman/df_t793567544_s13_p1
channel t2: starting datafile backupset restore
channel t2: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /oracle/app/oradata/dbprod/system01.dbf
restoring datafile 00003 to /oracle/app/oradata/dbprod/sysaux01.dbf
restoring datafile 00008 to /oracle/app/oradata/dbprod/datafile007.dbf
restoring datafile 00015 to /oracle/app/oradata/dbprod/datafile002.dbf
restoring datafile 00018 to /oracle/app/oradata/dbprod/indfile001.dbf
channel t2: reading from backup piece /oracle/app/prod/rman/df_t792538698_s15_p1
channel t3: starting datafile backupset restore
channel t3: specifying datafile(s) to restore from backup set
restoring datafile 00002 to /oracle/app/oradata/dbprod/undotbs01.dbf
restoring datafile 00009 to /oracle/app/oradata/dbprod/datafile008.dbf
restoring datafile 00013 to /oracle/app/oradata/dbprod/prefstat01.dbf
restoring datafile 00016 to /oracle/app/oradata/dbprod/datafile003.dbf
restoring datafile 00019 to /oracle/app/oradata/dbprod/indfile002.dbf
channel t3: reading from backup piece /oracle/app/prod/rman/df_t731097654_s14_p1
channel t4: starting datafile backupset restore
channel t4: specifying datafile(s) to restore from backup set
restoring datafile 00006 to /oracle/app/oradata/dbprod/datafile005.dbf
restoring datafile 00010 to /oracle/app/oradata/dbprod/datafile009.dbf
restoring datafile 00017 to /oracle/app/oradata/dbprod/datafile004.dbf
restoring datafile 00020 to /oracle/app/oradata/dbprod/indfile011.dbf
channel t4: reading from backup piece /oracle/app/prod/rman/df_t794754324_s12_p1
ORA-19870: error reading backup piece /oracle/app/prod/rman/
df_t793567544_s13_p1
ORA-19612: datafile 11 not restored due to missing or corrupt data
channel t3: restored backup piece 1
failover to piece handle=/oracle/app/prod/rman/
df_t731097654_s14_p1 tag=TAG20120822T184703
channel t3: restore complete, elapsed time: 01:06:05
channel t2: restored backup piece 1
failover to piece handle=/oracle/app/prod/rman/
df_t792538698_s15_p1 tag=TAG20120822T184703
channel t2: restore complete, elapsed time: 01:09:10
ORA-19870: error reading backup piece /oracle/app/prod/rman/
df_t794754324_s12_p1
ORA-19612: datafile 20 not restored due to missing or corrupt data
failover to previous backup
released channel: t1
released channel: t2
released channel: t3
released channel: t4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/22/2012 15:11:23
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN>
This same rman backup has been restored in other server, the commands were same but the db was not restored in my server.
Kindly help me....
Thanks in advance,
nonuday

Hi mseberg,
When I executed the below command with same date. This is what is got and am not able to understand what it says.
RMAN> run
+{+
SET UNTIL TIME "TO_DATE('10/22/2012','MM/DD/YYYY')";
restore database preview;
+}2> 3> 4> 5>+
executing command: SET until clause
Starting restore at 23-OCT-12
using channel ORA_DISK_1
List of Backup Sets
+===================+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+8 Full 11.68G DISK 02:10:15 22-AUG-12+
BP Key: 18   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t793567544_s13_p1
List of Datafiles in backup set 8
File LV Type Ckp SCN    Ckp Time Name
+4 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/users01.dbf+
+7 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile006.dbf+
+11 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile010.dbf+
+12 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/recop01.dbf+
+14 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile001.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+10 Full 11.35G DISK 02:15:49 22-AUG-12+
BP Key: 16   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t792538698_s15_p1
List of Datafiles in backup set 10
File LV Type Ckp SCN    Ckp Time Name
+1 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/system01.dbf+
+3 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/sysaux01.dbf+
+8 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile007.dbf+
+15 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile002.dbf+
+18 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/indfile001.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+11 Full 10.78G DISK 02:20:07 22-AUG-12+
BP Key: 15   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t731097654_s14_p1
List of Datafiles in backup set 11
File LV Type Ckp SCN    Ckp Time Name
+2 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/undotbs01.dbf+
+9 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile008.dbf+
+13 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/prefstat01.dbf+
+16 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile003.dbf+
+19 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/indfile002.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+12 Full 16.83G DISK 03:25:43 22-AUG-12+
BP Key: 14   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t794754324_s12_p1
List of Datafiles in backup set 12
File LV Type Ckp SCN    Ckp Time Name
+6 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile005.dbf+
+10 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile009.dbf+
+17 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile004.dbf+
+20 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile011.dbf+
archive logs generated after SCN 30013719101 not found in repository
Media recovery start SCN is 30013719101
Recovery must be done beyond SCN 30013719101 to clear data files fuzziness
Finished restore at 23-OCT-12
RMAN>
Thanks for reply,
Nonuday

[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

Just giving root cause explanation and resolution to closed topic:
https://bbs.archlinux.org/viewtopic.php?id=107241
where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241 :-(
Windows DD and unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
Resolution:
If you really don't have any Linux based machine to use Linux DD there is work around:
1. Install WIndows Virutalbox and extension pack
2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
4. Wait about 8minutes. halt. unplug usb. Voila.
Last edited by varsovie (2014-01-15 22:20:37)

I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
Perhaps my version of dd is too old?

Data1.cab missing or corrupted

when i try to install jre 5 update 6 it comes up with data1.cab file is missing or corrupted. what to do to install java?

Go to this page http://java.sun.com/j2se/1.5.0/download.jsp
IMPORTANT: Read the Install Instructions for the JRE choice.
Select the Download JRE 5.0 Update 6 link. (JRE, not any of the others.). In the next page, select the OFFLINE install. Click the downloaded file and an installer will start. The downloaded file can be deleted when the install is complete, if you wish.

Kernel Missing or corrupt

Similar Messages

Maybe you are looking for