Kernel module profiling tools?

Are there any tools available to profile a kernel module?
I have a STREAMS module that does crypto stuff and it's performance is not up to what I would like. I'd like to see where it's spending it's time.
Or is the best I can do keep track of time myself with gethrestime()?

Hello,
Also, if you are on Solaris 8, you can use lockstat. Please check
the man page of lockstat(1M) for more information.
Hope this helps.
-- Gopinath
Sun - DTS

Similar Messages

How to install tools to build a standard kernel module?

Hello!
I am a long time Fedora user trying to switch over to Arch for the ease of customization.
I am trying to build the hybrid_wl driver for my broadcom wireless card, and the requirements section says I need to have "the proper tools, packages, header files and libraries to build a standard kernel module. This is usually done by installing the kernel developer of kernel source package and caries from distro to distro."
I have never messed around with the kernel in Arch (or Fedora, for that matter) so I really have no clue what a standard module even is. What do I need to install to get this driver working?
Any help is welcome!
Thanks,
Jim

that is in aur.
http://aur.archlinux.org/packages.php?ID=19514
read about what is aur here: http://wiki.archlinux.org/index.php/AUR_User_Guidelines

[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0

After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)

Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09)

Compiled kernel module fails to install

A few moments ago finished compiling my own kernel, but still I can not boot with the new kernel.
When installing modules:
make modules_install
I get this:
Warning: you may need to install module-init-tools
The kernel was compiled in the traditional manner, and I get no error with mkinitcpio:
----> mkinitcpio -k 3.2.9 New -g /boot/initramfs-New.img
==> Starting build: 3.2.9
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
-> Running build hook: [fglrx]
Building fglrx module for 3.2.9 kernel ...
Ok.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-New.img
==> Image generation successful
I have the entry in grub and I can enter without problem, but there comes a point where you do not start:
Waiting 10 seconds for device /dev/sda4 ...
ERROR: Unable to find root device '/dev/sda4'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
And if my partition /root is /dev/sda4,I found a topic like this, but even I can not fix the problem:
https://bbs.archlinux.org/viewtopic.php?id=135851

I compiled the kernel old version that I have problems with the battery life on the newer versions.
The battery only lasts me one hour, but that is another problem.
fdisk:
Disk /dev/sda: 500.1 GB, 500107862016 bytes, 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Identificador del disco: 0x5d8c0991
Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT
/dev/sda2 409600 147210239 73400320 7 HPFS/NTFS/exFAT
/dev/sda3 147219660 862304939 357542640 5 Extendida
/dev/sda4 * 862304940 976773167 57234114 83 Linux
/dev/sda5 147219723 859477499 356128888+ 7 HPFS/NTFS/exFAT
/dev/sda6 859477563 862304939 1413688+ 82 Linux swap / Solaris
/lib/modules:
drwxr-xr-x 4 root root 4096 oct 3 20:40 3.2.9
drwxr-xr-x 3 root root 4096 oct 3 08:55 3.5.4-1-ARCH
drwxr-xr-x 2 root root 4096 oct 3 08:55 extramodules-3.5-ARCH
/boot:
drwxr-xr-x 6 root root 4096 oct 3 06:20 grub
-rw-r--r-- 1 root root 12612222 oct 3 08:55 initramfs-linux-fallback.img
-rw-r--r-- 1 root root 3098536 oct 3 08:55 initramfs-linux.img
-rw-r--r-- 1 root root 2016551 oct 3 20:40 initramfs-New.img
-rw-r--r-- 1 root root 2081862 oct 3 19:37 System.map-New
-rw-r--r-- 1 root root 3444736 sep 15 00:15 vmlinuz-linux
-rw-r--r-- 1 root root 4434400 oct 3 19:35 vmlinuz-New
I install grub-legacy of AUR, but I have to change to syslinux.
For now this is my menu.lst:
# (0) Arch Linux
title Arch Linux
root (hd0,3)
kernel /boot/vmlinuz-linux root=/dev/sda4 nomodeset vga=773 ro
initrd /boot/initramfs-linux.img
# (0) Arch Linux
title Arch Linux NK
root (hd0,3)
kernel /boot/vmlinuz-New root=/dev/sda4 nomodeset ro
initrd /boot/initramfs-New.img

Kernel Modules

I get this output when I run a script finding all my modules:
agpgart.ko
amd74xx.ko
ata_generic.ko
button.ko
cdrom.ko
ehci-hcd.ko
evdev.ko
fan.ko
fb_ddc.ko
forcedeth.ko
hid.ko
i2c-algo-bit.ko
i2c-core.ko
i2c-nforce2.ko
ide-core.ko
ide-pci-generic.ko
ieee1394.ko
k8temp.ko
libata.ko
nvidia.ko
nvidiafb.ko
ohci-hcd.ko
ohci1394.ko
pata_acpi.ko
pata_amd.ko
pci_hotplug.ko
pcspkr.ko
processor.ko
sata_nv.ko
scsi_mod.ko
sd_mod.ko
serio_raw.ko
shpchp.ko
snd-hda-intel.ko
snd-hwdep.ko
snd-page-alloc.ko
snd-pcm.ko
snd-pcsp.ko
snd-timer.ko
snd.ko
soundcore.ko
sr_mod.ko
thermal.ko
usb-storage.ko
usbcore.ko
usbhid.ko
vgastate.ko
So now what do I do? I am trying to compile a custom, slim, bloatless kernel.
Last edited by haxit (2009-03-01 01:15:01)

just few pointers regarding this:
agpgart.ko -- AGP support
amd74xx.ko -- AMD IDE support
ata_generic.ko -- generic ATA driver
button.ko -- power button?
cdrom.ko -- erm...
ehci-hcd.ko -- USB
evdev.ko -- input devices through the kernel
fan.ko -- fan control/readings via ACPI???
fb_ddc.ko -- framebuffer support/info reading module?
forcedeth.ko -- you have an nVidia chipset with an ethernet port, I guess
hid.ko -- human interface device support (mouse, FI)
i2c-algo-bit.ko
i2c-core.ko
i2c-nforce2.ko -- I2C is a serial bus, and has been used for ages. Apparently your chipset needs it.
ide-core.ko
ide-pci-generic.ko -- ??? Not using libata or something?
ieee1394.ko -- got Firewire?
k8temp.ko -- Athlon64?
libata.ko -- the good stuff
nvidia.ko -- you evil sheep, you! (OK, so I use the binary driver, too...)
nvidiafb.ko -- new framebuffer.
ohci-hcd.ko -- USB again?
ohci1394.ko -- Firewire again?
pata_acpi.ko
pata_amd.ko -- drive controller stuff again
pci_hotplug.ko -- for all of the three people with big-iron servers that use it? Or is it good for suspend/resume, or something? I dunno, but I don't put it in
pcspkr.ko -- I disable this one. Only my BIOS should be beeping at me.
processor.ko
sata_nv.ko -- again, nVidia drive controller
scsi_mod.ko -- you need this for all the SATA stuff to work right, I'm pretty sure
sd_mod.ko -- ditto
serio_raw.ko -- *shrug* raw serial I/O
shpchp.ko -- some kind of hotplug thingie?
snd-hda-intel.ko -- you have HDA sound onboard.
snd-hwdep.ko
snd-page-alloc.ko
snd-pcm.ko
snd-pcsp.ko -- same as the main kernel one, I leave it out. Sometimes ALSA likes to make it the default, too, for no good reason.
snd-timer.ko
snd.ko
soundcore.ko
sr_mod.ko -- I *think* this is needed for burners these days. In general, don't skimp in the SCSI support in the config (you don't need tape or media changer support, of course)
thermal.ko
usb-storage.ko
usbcore.ko
usbhid.ko -- HID again
vgastate.ko -- usually a dependency for framebuffer stuff, but I'm not sure beyond that
agpgart.ko -- AGP support
actually this one is potentially a performance culprit when using nvidia drivers. kernel agp is really bad. If you have installed nvidia binary driver, you don't need this one even with AGP card. If you have PCI/PCIE card, this is a waste.
nvidiafb.ko -- new framebuffer.
nope this one is for nVidia Riva128 (pretty old video card)
ohci-hcd.ko -- USB again?
there are three different USB controllers: OHCI, UHCi, EHCI
you can't simply disable one of these. all depends on hardware setup: if you have OHCI and UHCI then you need both. So "again" is not again, but system requirement.
run
lspci -v | grep HCI
to see which controllers do you have
scsi_mod.ko -- you need this for all the SATA stuff to work right, I'm pretty sure
no, you don't. But you need to check your hardware dependencies. I have SATA, and the only SCSI stuff loaded is SG and SD
sometimes you will see several modules which have partially the same name. e.g. firewire or usb or snd. all of these might be required for firewire (Assuming that you are using firewire at all) or sound to work. Sometimes the overlap.
my modules take only 2.6MB:
du -sh /lib/modules/2.6.28.7-slim
2.6M /lib/modules/2.6.28.7-slim
without nvidia driver (this one alone is 7.6MB)
does this speed up kernel? Only to some extend and in fact only particular modules will slow down boot time. In my case PCMCIA is slowing down kernel.
O.k. so what about disk space?
Are you kidding? default Arch kernel modules take 69MB and current disks are what? several (tenths, hundreds) GB? So this is no argument really.
So what about RAM?
You will be much better off trimming down your DM (KDE or Gnome) than kernel assuming that you are using one of these, however even small WM can be trimmed down. These two (KDE and Gnome) are pigs, but you can easily cut some fat without loosing usability.
So why I did this? not to gain anything. Out of curiosity really
there is a lot of tools that may help:
lspci
lsusb
cpuinfo
for example that may help.
Last edited by broch (2009-03-02 15:11:07)

Problem installing module-init-tools

Trying to install module-init-tools-0.9.12 (so I can try the 2.5.70 kernel) yields this dissapointing output:
[root@ArchLinux module-init-tools-0.9.12]# ./configure --prefix=/
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
/home/hcman/sources/module-init-tools-0.9.12/missing: Unknown `--run' option
Try `/home/hcman/sources/module-init-tools-0.9.12/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
configure: Adding gcc options: -g -O2 -Wunused -Wall -Wcast-align
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
[root@ArchLinux module-init-tools-0.9.12]# make moveold
if [ "`echo //sbin | tr -s / /`" = /sbin ]; then :;
else
echo moveold usually only makes sense when installing into /sbin;
exit 1;
fi
for f in lsmod modprobe rmmod depmod insmod modinfo; do
if [ -L /sbin/$f ]; then
ln -sf `ls -l /sbin/$f | sed 's/.* -> //'`.old /sbin/$f;
fi;
mv /sbin/$f /sbin/$f.old;
if [ -f /usr/share/man/man8/$f.8.gz ]; then
mv /usr/share/man/man8/$f.8.gz
/usr/share/man/man8/$f.old.8.gz;
elif [ -f /usr/share/man/man8/$f.8.bz2 ]; then
mv /usr/share/man/man8/$f.8.bz2
/usr/share/man/man8/$f.old.8.bz2;
else
mv /usr/share/man/man8/$f.8 /usr/share/man/man8/$f.old.8;
fi;
done
mv: cannot stat `/usr/share/man/man8/lsmod.8': No such file or directory
mv: cannot stat `/usr/share/man/man8/modprobe.8': No such file or directory
mv: cannot stat `/usr/share/man/man8/rmmod.8': No such file or directory
mv: cannot stat `/usr/share/man/man8/depmod.8': No such file or directory
mv: cannot stat `/usr/share/man/man8/insmod.8': No such file or directory
mv: cannot stat `/usr/share/man/man8/modinfo.8': No such file or directory
make: *** [move-old-targets] Error 1
[root@ArchLinux module-init-tools-0.9.12]# make
source='lsmod.c' object='lsmod.o' libtool=no
depfile='.deps/lsmod.Po' tmpdepfile='.deps/lsmod.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'lsmod.c' || echo './'`lsmod.c
gcc -g -O2 -Wunused -Wall -Wcast-align -o lsmod lsmod.o
source='insmod.c' object='insmod.o' libtool=no
depfile='.deps/insmod.Po' tmpdepfile='.deps/insmod.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'insmod.c' || echo './'`insmod.c
gcc -g -O2 -Wunused -Wall -Wcast-align -o insmod insmod.o
source='modprobe.c' object='modprobe.o' libtool=no
depfile='.deps/modprobe.Po' tmpdepfile='.deps/modprobe.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'modprobe.c' || echo './'`modprobe.c
gcc -g -O2 -Wunused -Wall -Wcast-align -o modprobe modprobe.o
source='rmmod.c' object='rmmod.o' libtool=no
depfile='.deps/rmmod.Po' tmpdepfile='.deps/rmmod.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'rmmod.c' || echo './'`rmmod.c
gcc -g -O2 -Wunused -Wall -Wcast-align -o rmmod rmmod.o
source='depmod.c' object='depmod.o' libtool=no
depfile='.deps/depmod.Po' tmpdepfile='.deps/depmod.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'depmod.c' || echo './'`depmod.c
source='moduleops.c' object='moduleops.o' libtool=no
depfile='.deps/moduleops.Po' tmpdepfile='.deps/moduleops.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'moduleops.c' || echo './'`moduleops.c
source='tables.c' object='tables.o' libtool=no
depfile='.deps/tables.Po' tmpdepfile='.deps/tables.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'tables.c' || echo './'`tables.c
gcc -g -O2 -Wunused -Wall -Wcast-align -o depmod depmod.o moduleops.o tables.o
source='modinfo.c' object='modinfo.o' libtool=no
depfile='.deps/modinfo.Po' tmpdepfile='.deps/modinfo.TPo'
depmode=gcc3 /bin/sh ./depcomp
gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE="module-init-tools" -DVERSION="0.9.12" -I. -I. -g -O2 -Wunused -Wall -Wcast-align -c `test -f 'modinfo.c' || echo './'`modinfo.c
gcc -g -O2 -Wunused -Wall -Wcast-align -o modinfo modinfo.o
gcc -g -O2 -Wunused -Wall -Wcast-align -o insmod.static -static insmod.o
[root@ArchLinux module-init-tools-0.9.12]# make install
make[1]: Entering directory `/home/hcman/sources/module-init-tools-0.9.12'
/bin/sh ./mkinstalldirs //bin
/bin/sh ./install-with-care lsmod //bin/lsmod
install-with-care lsmod //bin/lsmod
./install-with-care: line 21: /usr/bin/install: No such file or directory
./install-with-care: line 21: exec: /usr/bin/install: cannot execute: No such file or directory
make[1]: *** [install-binPROGRAMS] Error 126
make[1]: Leaving directory `/home/hcman/sources/module-init-tools-0.9.12'
make: *** [install-am] Error 2
Is there anyone who has this working who can point me in the right direction?
(Sorry for the long output but I thought it may prove helpful).
HC

Xentac wrote:I don't believe it's policy to support non-packaged programs, but it's your system .
...live life on the edge...that's me! LOL
Making a symlink did the trick.
I'll try to edit the Makefile and see if can get that to work too before I submit this as a package.
Oh, and of course I have to figure out how make a package in the first place.
So....I guess I should go do some reading eh?
Thanks.
HC

[SOLVED]How can I disable ehci_hcd kernel module?

How can I disable ehci_hcd kernel module loading?
I have up to date archlinux.
I tried add 'modprobe -r ehci_hcd' to '/etc/rc.local' but this broke net-profiles - ppp connection at bootup(I have USB modem (which of course work with uhci_hcd module) connected).
I also tried with '/etc/modprobe.d/modprobe.conf' and 'blacklist ehci_hcd' but ehci_hcd still loading at bootup.
Last edited by amen (2010-01-27 17:48:45)

bangkok_manouel wrote:http://wiki.archlinux.org/index.php/Rc.conf#Hardware
Thanks, but:
1) blacklist module in /etc/rc.conf not work:
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(floppy !snd-pcsp !ehci_hcd)
2) this not work also:
MOD_AUTOLOAD="no"
#MOD_BLACKLIST=() #deprecated
MODULES=(long_long_list_of_modules_without_ehci_hcd)
I found solution:
1) comments 2 lines in /etc/modprobe.d/usb-load-ehci-first.conf
#install ohci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe --ignore-install ohci_hcd $CMDLINE_OPTS
#install uhci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe --ignore-install uhci_hcd $CMDLINE_OPTS
2) and blacklist module ehci_hcd in /etc/rc.conf.

Trying to register the VirtualBox kernel modules using DKMS [FAILED]

Hi,
I am getting the following error while installing Oracle VirtualBox on OEL 5.2, 64-bit.
I am able to see Virtual Machine Wizard from "Applications > System Tools > Oracle VM VirtualBox". Can I go ahead and do 11gR2 RAC installation using Oracle VirtualBox ???
If I need to install DKMS kernel modules please let me know how to do that.
====================================================================================
[root@linux2 OracleVM]# rpm -Uvh VirtualBox-4.1-4.1.18_78361_rhel5-1.x86_64.rpm
warning: VirtualBox-4.1-4.1.18_78361_rhel5-1.x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 98ab5139
Preparing... ########################################### [100%]
1:VirtualBox-4.1 ########################################### [100%]
Creating group 'vboxusers'. VM users must be member of that group!
No precompiled module for this kernel found -- trying to build one. Messages
emitted during module compilation will be logged to /var/log/vbox-install.log.
Stopping VirtualBox kernel modules [ OK ]
Uninstalling old VirtualBox DKMS kernel modules [ OK ]
Trying to register the VirtualBox kernel modules using DKMS [FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [ OK ]
Starting VirtualBox kernel modules [ OK ]
====================================================================================
Thanks.
-Joy.

And this relates to RAC, ASM, and Clusterware installation in what way?
Please lock this thread and open one in the appropriate forum. Thanks.

Unable to load the kernel module 'nvidia.ko' [SOLVED]

After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)

if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01)

Questions: On NVIDIA Kernel module and install process

Hi everyone,
I have a PCIe 7600 GT card, and trying to get it to work in its full power.
So far I have not succeeded, and condemned to run in VESA mode. But have one more try to do following the advisory of upgrading kernel and reinstalling the Nvidia driver.
I have few questions though:
- I know my kernel as 2.6.15-ARCH (from the dir in /usr/src), but in the above mentioned advisory, there were more digits after ("2.6.16.14-1"). Where in my system, I can locate those micro version numbers, if I need to?
- My not-yet-working Nvidia driver insrtall (from [testing]) left a kernel module with "agp" in the name. Is it the way it should be, taking into account that I have a PCIe card? Or is this pointing to an install problem?
- I have browsed the stuff in the 8756 vintage of the Nvidia driver, and noticed that there are references to X11R6 which I do not have (have an X R7 Xorg). Which one of the driver-install-script or Arch-PKGBUILD-file has the intelligence to place the files correctly in R6 and R7 installs?
- The 8756 text also refers to nvidia-xconfig utility, and I did use it in my 64-bit Gentoo install. In my Arch install it is no where to be found. Again, is this pointing to an install problem?
Thanks,

1.
pacman -Q kernel26
will give you the minor numbers
2. no clue
3. the 8751 driver works fine with xorg 7, so i presume the new one should work also.
4. no clue
as an alternative to VESA :
pacman -S xf86-video-nv
this will install the open source nvidia driver. It supports only 2D acceleration, but should improve your screen a lot over standard VESA.
put
Driver "nv"
in your device section in xorg.conf to enable it.

[Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.

fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking. I've tried a few reinstalls and different xorg options so far, but had no luck.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Xorg.0.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mx518"
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4088
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xfde00000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
(II) fglrx(0): Year: 2006 Week: 33
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
(II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: F-419
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000523509449010000
(II) fglrx(0): 2110010380251e78e8e595a5584c9726
(II) fglrx(0): 1e5054bfef808180818a818c01010101
(II) fglrx(0): 010101010101bc34009851002a403070
(II) fglrx(0): 1300782d1100001ed60980a0205e6310
(II) fglrx(0): 10605208782d1100001a000000fd0032
(II) fglrx(0): 4b1e500e000a202020202020000000fc
(II) fglrx(0): 00462d3431390a2020202020202000ba
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 37 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (370, 300) mm
(--) fglrx(0): DPI set to (87, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
[1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
(II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
(II) fglrx(0): [drm] framebuffer handle = 0xb5000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
icon[0].start=0x505000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
icon[1].start=0x508000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) mx518: Device: "/dev/input/mice"
(**) mx518: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) mx518: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(==) mx518: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) mx518: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7"
(**) mx518: Buttons: 14
(**) Option "Resolution" "800"
(**) mx518: Resolution: 800
(II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) mx518: ps2EnableDataReporting: succeeded
xorg.conf:
Section "ServerLayout"
Identifier "Xorg"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "mx518" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "off" # Disable AIGLX
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
# Fonts
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "fglrx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Options
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
# Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mx518"
Driver "mouse"
# Options
Option "CorePointer"
Option "Resolution" "800"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "10"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AG Neovo"
ModelName "F-419"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
# Options
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
VendorName "All"
BoardName "All"
Driver "fglrx"
# Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "AGPMode" "8"
# Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "XEVIE" "Enable"
# Option "Composite" "Enable"
#Endsection
Would it be possible to explain the other warnings in Xorg.0.log? Rather curious about those apart from the obvious one, too.
Thanks.
Last edited by Newnux (2007-07-11 16:04:15)

Indeed, that seems the end-all error of it all.
I'll summarise my warnings, some for curious reasons:
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Anyway, I wondered about versions and noticed this:
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
(II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
(II) fglrx(0): [drm] framebuffer handle = 0xbd000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
All versions previous to that show 8.38.6:
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
Now, quoting something I'd come across a few times and taking it from thinkwiki:
If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
Check out /var/log/Xorg.0.log for a message like:
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
Hint:
Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
How does this apply to Arch? I only found one instance of fglrx by using that method.
Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything. Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me. Surely others have updated their drivers too.
Last edited by Newnux (2007-07-11 13:28:55)

[Solved] Failed to initialize the NVIDIA kernel module

Hi all,
I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
The method I am using - after much trial - is:
- uninstall nouveau and mesa lib
- install nvidia package
- remove nouveau module entry in mkinitcpio.conf
- run `mkinitcpio -p linux`
- edit .conf in xorg.conf.d with minimal required settings. Currently:
Section "Device"
Identifier "device0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
I have installed the linux-headers package and tried reinstalling nvidia again
Card:
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
Kernel:
3.12.6-1-ARCH
My Xorg.0.log looks like:
[ 3.979]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 3.979] X Protocol Version 11, Revision 0
[ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 3.979] Build Date: 13 December 2013 03:11:42PM
[ 3.979]
[ 3.979] Current version of pixman: 0.32.4
[ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
[ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.980] (==) No Layout section. Using the first Screen section.
[ 3.980] (==) No screen section available. Using defaults.
[ 3.980] (**) |-->Screen "Default Screen Section" (0)
[ 3.980] (**) | |-->Monitor "<default monitor>"
[ 3.981] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.981] (**) | |-->Device "device0"
[ 3.981] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.981] (==) Automatically adding devices
[ 3.981] (==) Automatically enabling devices
[ 3.981] (==) Automatically adding GPU devices
[ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.984] Entry deleted from font path.
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.984] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.984] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.984] (II) Loader magic: 0x7fec20
[ 3.984] (II) Module ABI versions:
[ 3.984] X.Org ANSI C Emulation: 0.4
[ 3.984] X.Org Video Driver: 14.1
[ 3.984] X.Org XInput driver : 19.1
[ 3.984] X.Org Server Extension : 7.0
[ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.986] Initializing built-in extension Generic Event Extension
[ 3.986] Initializing built-in extension SHAPE
[ 3.986] Initializing built-in extension MIT-SHM
[ 3.986] Initializing built-in extension XInputExtension
[ 3.986] Initializing built-in extension XTEST
[ 3.986] Initializing built-in extension BIG-REQUESTS
[ 3.986] Initializing built-in extension SYNC
[ 3.986] Initializing built-in extension XKEYBOARD
[ 3.986] Initializing built-in extension XC-MISC
[ 3.986] Initializing built-in extension SECURITY
[ 3.986] Initializing built-in extension XINERAMA
[ 3.986] Initializing built-in extension XFIXES
[ 3.986] Initializing built-in extension RENDER
[ 3.986] Initializing built-in extension RANDR
[ 3.986] Initializing built-in extension COMPOSITE
[ 3.986] Initializing built-in extension DAMAGE
[ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.986] Initializing built-in extension DOUBLE-BUFFER
[ 3.986] Initializing built-in extension RECORD
[ 3.986] Initializing built-in extension DPMS
[ 3.986] Initializing built-in extension X-Resource
[ 3.986] Initializing built-in extension XVideo
[ 3.986] Initializing built-in extension XVideo-MotionCompensation
[ 3.986] Initializing built-in extension XFree86-VidModeExtension
[ 3.986] Initializing built-in extension XFree86-DGA
[ 3.986] Initializing built-in extension XFree86-DRI
[ 3.986] Initializing built-in extension DRI2
[ 3.986] (II) LoadModule: "glx"
[ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.075] compiled for 4.0.2, module version = 1.0.0
[ 4.075] Module class: X.Org Server Extension
[ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.076] Loading extension GLX
[ 4.076] (II) LoadModule: "nvidia"
[ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.082] compiled for 4.0.2, module version = 1.0.0
[ 4.082] Module class: X.Org Video Driver
[ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.083] (++) using VT number 7
[ 4.090] (II) Loading sub module "fb"
[ 4.090] (II) LoadModule: "fb"
[ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.091] (II) Module fb: vendor="X.Org Foundation"
[ 4.091] compiled for 1.14.5, module version = 1.0.0
[ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4.091] (II) Loading sub module "wfb"
[ 4.091] (II) LoadModule: "wfb"
[ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.092] (II) Module wfb: vendor="X.Org Foundation"
[ 4.092] compiled for 1.14.5, module version = 1.0.0
[ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.092] (II) Loading sub module "ramdac"
[ 4.092] (II) LoadModule: "ramdac"
[ 4.092] (II) Module "ramdac" already built-in
[ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4.093] (==) NVIDIA(0): RGB weight 888
[ 4.093] (==) NVIDIA(0): Default visual is TrueColor
[ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 4.095] (EE) NVIDIA(0): *** Aborting ***
[ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4.095] (II) UnloadModule: "nvidia"
[ 4.095] (II) UnloadSubModule: "wfb"
[ 4.095] (II) UnloadSubModule: "fb"
[ 4.095] (EE) Screen(s) found, but none have a usable configuration.
[ 4.095] (EE)
Fatal server error:
[ 4.095] (EE) no screens found(EE)
[ 4.095] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.095] (EE)
[ 4.107] (EE) Server terminated with error (1). Closing log file.
The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
Any help much appriciated. I've been at this for a while. Learning a lot in the process!
Last edited by gnibbler (2014-01-04 22:31:49)

Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
I hope some info in here helps some other stuck archer.
Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
Last edited by gnibbler (2014-01-04 22:35:00)

Trouble building kernel module for sensor support

Hi, I'm new here but have been using Arch for a while. Recently, I decided to install Arch on an old laptop (Toshiba A70) and have managed to work out most of the kinks to where it runs nicely. Unfortunately, ACPI support is spotty and the /sys/class/thermal directory gives me only cooling_device0. I installed the lm-sensors package and ran sensors-detect, which yielded no results. Although the laptop runs smoothly otherwise, I would like to know the CPU's temp so that I would be able to set up a fan control scheme and CPU scaling (so far it's stuck at the lowest frequency, and that's kind of a big deal for me since the laptop runs on an archaic mobile P4 chip).
Sorry for the story but I felt some context was necessary. I did manage to find a kernel module that would connect those sensors to ACPI for me (http://sourceforge.net/projects/omnibook/), however I'm having trouble building it on the latest kernel. Here is the output from running make:
make -C /lib/modules/3.16.1-1-ARCH/build SUBDIRS=/root/omnibook-2.20070211 modules
make[1]: Entering directory '/usr/lib/modules/3.16.1-1-ARCH/build'
CC [M] /root/omnibook-2.20070211/init.o
In file included from /root/omnibook-2.20070211/init.c:26:0:
/root/omnibook-2.20070211/laptop.h:25:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
/root/omnibook-2.20070211/laptop.h:25:3: warning: (near initialization for ‘omnibook_ids[0].callback’)
/root/omnibook-2.20070211/laptop.h:34:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
/root/omnibook-2.20070211/laptop.h:34:3: warning: (near initialization for ‘omnibook_ids[1].callback’)
/root/omnibook-2.20070211/laptop.h:43:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
// I left out most of the 'incompatible pointer type' warnings since they repeat for a while.
^
/root/omnibook-2.20070211/laptop.h:1001:3: warning: (near initialization for ‘omnibook_ids[108].callback’)
/root/omnibook-2.20070211/init.c: In function ‘dmi_matched’:
/root/omnibook-2.20070211/init.c:141:16: warning: assignment discards ‘const’ qualifier from pointer target type
laptop_model = dmi_get_system_info(DMI_PRODUCT_VERSION);
^
/root/omnibook-2.20070211/init.c: In function ‘omnibook_init’:
/root/omnibook-2.20070211/init.c:281:3: error: implicit declaration of function ‘create_proc_entry’ [-Werror=implicit-function-declaration]
proc_entry = create_proc_entry(feature->name, pmode, omnibook_proc_root);
^
/root/omnibook-2.20070211/init.c:281:14: warning: assignment makes pointer from integer without a cast
proc_entry = create_proc_entry(feature->name, pmode, omnibook_proc_root);
^
/root/omnibook-2.20070211/init.c:290:13: error: dereferencing pointer to incomplete type
proc_entry->data = feature;
^
/root/omnibook-2.20070211/init.c:291:13: error: dereferencing pointer to incomplete type
proc_entry->read_proc = &procfile_read_dispatch;
^
/root/omnibook-2.20070211/init.c:293:14: error: dereferencing pointer to incomplete type
proc_entry->write_proc = &procfile_write_dispatch;
^
/root/omnibook-2.20070211/init.c:294:13: error: dereferencing pointer to incomplete type
proc_entry->owner = THIS_MODULE;
^
cc1: some warnings being treated as errors
scripts/Makefile.build:257: recipe for target '/root/omnibook-2.20070211/init.o' failed
make[2]: *** [/root/omnibook-2.20070211/init.o] Error 1
Makefile:1333: recipe for target '_module_/root/omnibook-2.20070211' failed
make[1]: *** [_module_/root/omnibook-2.20070211] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.16.1-1-ARCH/build'
Makefile:88: recipe for target 'omnibook.ko' failed
make: *** [omnibook.ko] Error 2
I have honestly no idea what to make of any of this and would really appreciate any help towards a solution. Thanks for reading

Welcome to Arch Linux
That looks like it is a 2.6 kernel module
http://sourceforge.net/p/omnibook/bugs/58/
Did you try either of these AUR offerings?
ewaller$@$odin ~ 1001 %packer -Ss omnibook
aur/omnibook-git 20110911-9 (7)
Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops
aur/omnibook-svn-zen 268-1 (1)
Kernel module for HP OmniBook, Pavilion, Toshiba and Compal ACL00 laptops
ewaller$@$odin ~ 1002 %
Last edited by ewaller (2014-08-23 23:33:53)

"Failed to load the NVIDIA kernel module" [SOLVED]

Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)

karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)."

VFAT kernel module won't load [SOLVED]

I'm running kernel version 3.7.5 and after the update that got me to that version, it appears to have completely borked VFAT and kernel modules in general. My system still runs fine, but the vfat module is missing and cannot be loaded with modprobe or insmod. Oddly, the kernel object exists in /usr/lib/modules, yet my system seems to be ignoring it. Upon further investigation, it appears that it is impossible to load or remove ANY modules using modprobe or insmod. I recently did a reinstall of Arch, following exactly the steps in the Beginner's Guide, if that makes any difference.
Help? Please? I need the vfat module loaded before I can compile a custom kernel (my next big project)
Last edited by ParanoidAndroid (2013-02-01 00:50:27)

yup, that worked *facepalm* marking as solved.

Kernel module profiling tools?

Similar Messages

Maybe you are looking for