Kernel Panic and Black Screen

Hi,
Last night I was in the middle of downloading a file and had a kernal panic (crash report below).
When I now log in I either immediately get a black screen ( but can see white spots
which are the corners of windows opened) or sometimes I get to my desktop but after a few minutes
the screen windows deteriate (repeatative ghosting like an old 80'spop video!) which then become unresponsive.
I'm figuring it's had it's day now and hope to get a new iMac tonight. I would like to migrate everything but am unsure
whether this is a hard drive failure ( in which case the migration is probably out of the window) or something else?
Any guidance would be much appreciated.
Thanks
Interval Since Last Panic Report: 2699211 sec
Panics Since Last Report: 4
Anonymous UUID: 3489AC4E-2DC6-4498-AF01-5828C8995EB4
Wed May 23 20:58:09 2012
panic(cpu 0 caller 0x2cdabf): Kernel trap at 0x0030bded, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x2d030318, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x2d030304, EBX: 0x0ed80a86, ECX: 0x05b58c78, EDX: 0x07b35040
CR2: 0x2d030318, EBP: 0x00e5be58, ESI: 0x05b58c50, EDI: 0x07b35030
EFL: 0x00010202, EIP: 0x0030bded, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0xe5bc78 : 0x22032e (0x6ad91c 0xe5bc98 0x229f00 0x0)
0xe5bca8 : 0x2cdabf (0x6b9e58 0x30bded 0xe 0x6b9e01)
0xe5bd58 : 0x2e3e34 (0xe5bd80 0xe5bd68 0xe5bd78 0x0)
0xe5bd78 : 0x30bded (0xe 0x7b30048 0x5ab0010 0xe50010)
0xe5be58 : 0x511538 (0x5b58c50 0x0 0x511400 0xe5be98)
0xe5bec8 : 0x328672 (0x5b58c50 0x2 0x582076c 0x22e8d7)
0xe5bef8 : 0x30fffd (0x5b58c50 0x2 0x582076c 0x5b58c50)
0xe5bf18 : 0x307f24 (0x5b58c50 0x0 0xe5bf58 0x240b4e)
0xe5bf58 : 0x31b242 (0x1 0x30ffc0 0x0 0x2c62b6)
0xe5bf78 : 0x5f166a (0x5c92c20 0x5826914 0x58206b0 0x0)
0xe5bfc8 : 0x2e4977 (0x5826910 0x7fff 0x10 0x5826910)
BSD process name corresponding to current thread: launchd
Mac OS version:
11D50d
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:48:32 PST 2012; root:xnu-1699.24.23~1/RELEASE_I386
Kernel UUID: 8986BDEF-9D4E-32D2-8566-2196FD2D35B2
System model name: iMac6,1 (Mac-F4218FC8)
System uptime in nanoseconds: 2342405059677
last loaded kext at 47581990303: com.apple.driver.AppleHWSensor     1.9.4d0 (addr 0x20b4000, size 28672)
last unloaded kext at 201601911872: com.apple.driver.PioneerSuperDrive     3.0.1 (addr 0x1f92000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor     1.9.4d0
com.apple.driver.AudioAUUC     1.59
com.apple.filesystems.autofs     3.0
com.apple.driver.AppleHDA     2.1.7f9
com.apple.driver.AppleUpstreamUserClient     3.5.9
com.apple.driver.AppleMCCSControl     1.0.26
com.apple.GeForce7xxx     7.0.0
com.apple.driver.AppleBacklight     170.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin     4.7.5d4
com.apple.driver.AppleLPC     1.5.3
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AudioIPCDriver     1.2.2
com.apple.driver.AppleIRController     312
com.apple.iokit.SCSITaskUserClient     3.0.3
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     33
com.apple.iokit.IOAHCIBlockStorage     2.0.1
com.apple.driver.AirPortBrcm43224     500.36.11
com.apple.driver.AppleUSBHub     4.5.0
com.apple.driver.AppleAHCIPort     2.2.0
com.apple.driver.AppleIntelPIIXATA     2.5.1
com.apple.driver.AppleFWOHCI     4.8.9
com.apple.iokit.AppleYukon2     3.2.2b1
com.apple.driver.AppleUSBEHCI     4.5.8
com.apple.driver.AppleUSBUHCI     4.4.5
com.apple.driver.AppleEFINVRAM     1.5.0
com.apple.driver.AppleRTC     1.4
com.apple.driver.AppleHPET     1.6
com.apple.driver.AppleACPIButtons     1.4
com.apple.driver.AppleSMBIOS     1.7
com.apple.driver.AppleACPIEC     1.4
com.apple.driver.AppleAPIC     1.5
com.apple.driver.AppleIntelCPUPowerManagementClient     167.3.0
com.apple.nke.applicationfirewall     3.2.30
com.apple.security.quarantine     1.1
com.apple.driver.AppleIntelCPUPowerManagement     167.3.0
com.apple.driver.AppleAVBAudio     1.0.0d11
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib     2.1.7f9
com.apple.iokit.IOFireWireIP     2.2.4
com.apple.driver.AppleBacklightExpert     1.0.3
com.apple.driver.AppleHDAController     2.1.7f9
com.apple.iokit.IOHDAFamily     2.1.7f9
com.apple.driver.IOPlatformPluginFamily     4.7.5d4
com.apple.nvidia.nv40hal.G7xxx     7.0.0
com.apple.NVDAResman.G7xxx     7.0.0
com.apple.iokit.IOSurface     80.0
com.apple.iokit.IOBluetoothSerialManager     4.0.3f12
com.apple.iokit.IOSerialFamily     10.0.5
com.apple.iokit.IOAVBFamily     1.0.0d22
com.apple.iokit.IOEthernetAVBController     1.0.0d5
com.apple.driver.AppleSMC     3.1.1d8
com.apple.iokit.IOAudioFamily     1.8.6fc6
com.apple.kext.OSvKernDSPLib     1.3
com.apple.driver.ApplePolicyControl     3.0.16
com.apple.driver.AppleGraphicsControl     3.0.16
com.apple.iokit.IONDRVSupport     2.3.2
com.apple.iokit.IOGraphicsFamily     2.3.2
com.apple.driver.CSRUSBBluetoothHCIController     4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController     4.0.3f12
com.apple.iokit.IOBluetoothFamily     4.0.3f12
com.apple.driver.AppleUSBHIDKeyboard     152.3
com.apple.driver.AppleHIDKeyboard     152.3
com.apple.iokit.IOUSBHIDDriver     4.4.5
com.apple.driver.AppleUSBMergeNub     4.5.3
com.apple.driver.AppleUSBComposite     4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.0.3
com.apple.iokit.IOBDStorageFamily     1.6
com.apple.iokit.IODVDStorageFamily     1.7
com.apple.iokit.IOCDStorageFamily     1.7
com.apple.driver.XsanFilter     403
com.apple.iokit.IOATAPIProtocolTransport     3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily     3.0.3
com.apple.iokit.IO80211Family     412.2
com.apple.iokit.IOUSBUserClient     4.5.8
com.apple.iokit.IOAHCIFamily     2.0.7
com.apple.iokit.IOATAFamily     2.5.1
com.apple.iokit.IOFireWireFamily     4.4.5
com.apple.iokit.IONetworkingFamily     2.0
com.apple.iokit.IOUSBFamily     4.5.8
com.apple.driver.AppleEFIRuntime     1.5.0
com.apple.iokit.IOHIDFamily     1.7.1
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     177.3
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.DiskImages     331.3
com.apple.iokit.IOStorageFamily     1.7
com.apple.driver.AppleKeyStore     28.18
com.apple.driver.AppleACPIPlatform     1.4
com.apple.iokit.IOPCIFamily     2.6.8
com.apple.iokit.IOACPIFamily     1.4
Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB, SMC 1.10f2
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F7F7F02, 0x3235365836344D2D36374500560000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST3250824AS Q, 250.06 GB
Parallel ATA Device: PIONEER DVD-RW DVR-K06
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 5
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd500000 / 3
USB Device: Microsoft 5-Button Mouse with IntelliEye(TM), 0x045e (Microsoft Corporation), 0x0039, 0xfd530000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd520000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x7d100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8240, 0x7d200000 / 3

Hello,
Migration will be easy if both have Firewire & this one boots into Target mode...
http://support.apple.com/kb/HT1661
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If 10.7 or more, reboot holding CMD+r down to boot from the Restore Partition, use Disk Utility there.

Similar Messages

  • Help with kernel panic and freezing screen?

    A few months ago I had kernel panic screens about twice, but the problem didn't recur again for a while. Over the last two weeks, however, I've had two more kernel panics, and the screen freezes (mouse, all actions, etc) and the machine has to be manually restarted about every five minutes.
    I've tested the two ram sticks, erased and re-installed the OS but had no luck resolving the issue.
    I followed the link on resolving kernel panic problems from earlier threads to troubleshoot as much as possible. I don't have the original software so can't do a few steps, but on the whole have had no luck.
    I don't have any external or USB devices hooked up when it fails. I do occasionally use USB pen drives, but that doesn't seem to be related. I bought a new, non-apple power source a while back, too, but also don't think that's related.
    Before I bought the laptop from a friend, he installed a different hard drive, but I believe it came from another G4 Ti machine. He left two screws out of the bottom of the case.
    I'm thinking mainboard or possible hard drive? Any ideas?
    Also, since reinstalling the harddrive, I've had no error report message come up when the machine restarts, and there isn't an error log file, at least not for kernel panics (that I can find.) Before I reinstalled the OS, I read the error reports and they said something about kernels....but I don't remember what, specifically.
    If there are other useful logs I could post, let me know and I'll find them. Are the console logs or directory service logs of any use?
    Thanks in advance for any help or any advice...!
    PowerBook G4 Ti Mac OS X (10.4)
    PowerBook G4 Ti   Mac OS X (10.4)  

    Hi tjk
    - Thanks for the help.
    I've tested the two ram sticks
    How?
    I took out each stick one at a time and ran the machine with a single instead of both.
    I have dual 256 sticks. The original, and a Samsung which came with it when I bought it used.
    In both cases, the same problem occurred.
    How much free space do you have available on your HD?
    If not 5GB or more, this could be causing issues.
    I had about 20GB free. Now it's running with 70Gb free and still the same problems. It's an 80 GB hard drive that was installed into the PB when I bought it a few months ago. I had the machine for about three weeks first, and didn't have any of these problems with the other hard drive in it.
    I don't have the install disk, so can't run the disk utility repair, correct. I've also not been able to get the PB to boot from the disk instead of the hard drive. It brings up only the hard drive as a selection to boot from, and spins up the OSX DVD, then ejects it each time.
    ...not sure why...I've been holding down option when restarting to boot from other drives -- if there's another way to boot from the disk, maybe that would work...
    Have a look at the Orange Ribbon Cable Issue/Fix and see if
    it might apply to your PB. Which Ti do you have btw?
    This is a really interesting link and for a bit I thought it sounded exactly like the problem...but I have the original TiBook, 500 Mhz so the trackpad cable doesn't run through the same spot. Maybe there's something else shorting out or pinching underneath...I'll take a look, but I'm not necessarily hardware savvy enough to know what to look for.
    Thanks again for any suggestions.
    PowerBook G4 Ti Mac OS X (10.4)

  • IMac G4 800MHz - Kernel Panics and Blank Screen At Startup

    Two days ago, I was listening to iTunes, just browsing the internet, and suddenly I got a kernel panic. Yesterday, the exact same thing happened. After that, I got frustrated and just left it alone until today. When I attempted to turn on my iMac G4 800 MHz today, the screen does not turn on and the mouse does not even receive power. The only thing that appears to receive power is the power LED on the display.
    I experimented with it for a few minutes and found that if I unplug the power cord for a few minutes, plug it back in, and turn the computer back on, the screen will turn on. However, as soon as I log in, I get another kernel panic, and it goes back to the screen not turning on.
    Any suggestions?

    ::UPDATE::
    Okay, I eventually got my iMac to start up successfully, without crashing after logging in. But I still thought there was something wrong so I booted from the Apple Hardware Test CD that came with my computer and I got yet ANOTHER Kernel Panic! Here is what it said:
    Kernel Panic Message:
    DEFAULT CATCH!, code=300 at %SRR0: 000352d4 %SRR1: 00003030
    Apple PowerMac4,2 4.3.5f1 BootROM built on 03/16/02 at 21:45:18
    Copyright 1994-2002 Apple Computer, Inc.
    All Ri
    DEFAULT CATCH!, code=300 at %SRR0: ff84750c %SSR1: 0000b030
    ok
    0>
    DEFAULT CATCH!, code=300 at SSR0: ff84750c %SSR1:_
    This message appeared soon after it began testing the memory. The result of the test were as follows:
    Test Results:
    Airport Passed
    Logic Board Passed
    Mass Storage Passed
    Memory In Progress
    Modem Device Found
    Video RAM Has not been run yet
    And now it is back to not booting up at all!
    Does anyone have any suggestions based on the new kernel panic message?
    Thank you for your help.
    Message was edited by: rrm74001

  • Kernel panics and grey screen on startup

    Hello savvy bunch,
    I recently acquired a wonderful little Core Solo mini. My plan was to
    run it starting up from a 400GB hard drive in an external FW enclosure
    that has another 200GB drive I was going to use for backups. Long
    story short, the 400GB drive starting giving me weird Finder problems
    and such. Booting from the internal HDD in the mini fixed everything.
    Then it started having sudden kernel panics at random moments (I could
    be writing an email, browsing on Safari, whatever), after which upon
    restart I get an empty grey screen that lasted forever. I tried
    several fixes, and the only one that worked was unplugging the FW
    enclosure. I erased and fixed both external HDDs, and things calmed
    down for a while, but I just had another kernel panic-grey screen
    episode, which I solved turning off the FW enclosure.
    I remember now that I had similar problems before with the same
    enclosure/HDDs and my Quicksilver. Could the problem be the enclosure,
    or the hard drives themselves?
    TIA,

    Oh, don't worry, I know and use all the right protocols for mounting and unmounting FW drives. They only get turned off AFTER they are dismounted. Of course now I realize that you wouldn't think so the way I described what I was doing. (That was some lazy writing, I guess.) I also have several external drives in use with several other computers. It's this particular enclosure that seems to be trouble.
    As far as brands go, this is some kind of generic two-drive enclosure I got from OWC on a big sale a while back. I cannot find a brand name for the life of me (and I have looked all over it). I have not had a lot of luck with two-drive enclosures. This is my second (the first one was I think a Newertech or some other OWC brand, which died very quickly on me. The HDDs survived and are still in use.)
    As for Lacies, Smokerz, you are completely right. My first FW enclosure ever was a Lacie, and it's still going strong. I have my eye on a Lacie 1TB enclosure that's in Newegg for $99...

  • Kernel panic and distorted screen on startup - mac book pro c.2008 on os x 10.4! HELP!

    I've had my mac book pro since 2007/8, it's on os x 10.4, and has worked well until last night when the screen froze in a crazy distorted pattern and I had to turn it off. Now it kernel panics every time i turn it on and it attempts to start up with the same crazy distorted pattern across the loading screen and even the kernel panic message.
    I don't have the start up discs with me.
    I've tried the troubleshooting for kernel panics i.e.
    1. holding [shift] when start up  - did nothing
    2. holding [option + command + p + r] when start up - chimed three times but wouldn't load  after this
    3. holding [command + s] on start up to boot in single user mode - it loads the logs but with the same crazy distortion and when i try to exit to boot in single user mode it won't do anything
    so that is where i am up to... really need my laptop for work and about to leave the country to travel so need it asap - i'm in melbourne and the apple store is miles out of city - any suggestions on reliable apple retailers also gratefully received...
    anyone any ideas on the damage/ cause/ possible solution???
    i love my mac. please don't die.

    If this happened spontaneously and not as the result of a software update or any other change that you made, then it's probably due either to a hardware failure or to data corruption. There isn't much you can do without the installation disc, and maybe not even with the disc. If you can boot in single-user mode, run fsck as prompted on the screen. If it finds problems, run it again.
    Any authorized Apple dealer should be able to provide service, but it may take more time than you have.

  • Kernel Panic and random screen glitches

    iMac G5 20".
    Just today, started seeing tiny "glitches" in the scrren (like distorted graphics here and there). this rapidly progressed to worse where the fill the screen and patterns start flickering all over, then kernel panics. Can still see the OS "underneath all the "gibberish" sometimes unable to operate though.
    I was able to run an extended hardware test, no errors (but this would still happen randomly during the test)
    Problem is there when booting from CD.
    Did PRAM and SMC reset.
    This thing has had it's logic board replaced 3 times already over the years under extended warranties. Last time went well for awhile. Not sure I can brink it back again and it's becoming more trouble than it's worth with things like this popping up.
    Any ideas on a possible fix, before I dump it?

    Artifacts indicate another logic board failure, sorry to say.

  • Constant Kernel Panics? Black Screen? Video problems? You should know about this Class Action Suit against Apple for selling defective logic boards.

    CLASS ACTION FILED AGAINST APPLE FOR DEFECTIVE MACBOOK LOGIC BOARDS
    I was one of the many unfortunate individuals who ended up paying Apple the $310 repair fee (more than $400 total, diagnostics included) to fix what was a defective logic board causing constant kernel panics. I don't think the suit has come to a conclusion or a settlement has been reached, but after spending the last month or so on this board trying to diagnose my kernel panics, I figured many others with similar problems would be interested in knowing about this.
    If anyone has any more up-to-date information on the suit or on what individuals should do if they believe they fall into the Plaintiff Class, please share!

    CLASS ACTION FILED AGAINST APPLE FOR DEFECTIVE MACBOOK LOGIC BOARDS
    I was one of the many unfortunate individuals who ended up paying Apple the $310 repair fee (more than $400 total, diagnostics included) to fix what was a defective logic board causing constant kernel panics. I don't think the suit has come to a conclusion or a settlement has been reached, but after spending the last month or so on this board trying to diagnose my kernel panics, I figured many others with similar problems would be interested in knowing about this.
    If anyone has any more up-to-date information on the suit or on what individuals should do if they believe they fall into the Plaintiff Class, please share!

  • Panic message restart grey and black screen

    WOONT RE BOOT OR START
    Computer froze and after manual power down and restart, grey and black screen appeared with a message to hold powwer button down to power off and then hold power button again to restart. I did and got same screen and message. "PANIC"  and "Debugger called: <panic>" message in background.

    Hi Fred,
    Is this happening for all Flash content or just your website?  Can you give us a link so we can take a look?  Can you also please post back with your system's configuration report?
    Windows Instructions  
    Mac Instructions
    Please check to see if you are using the NPAPI version of the Flash Player plugin in Chrome.  Let me know if you need instructions on how to do this.  If you are, please try switching back to the PPAPI version to see if that corrects the problem.
    I'm moving this post over to the Flash Player beta forum.
    Thanks,
    Chris

  • Kernel panic and artifacts on the screen

    Hello everyone!
    I'm having kernel panic on my 2006 24" iMac A1200.
    Also, there's small artifacts (little colored dots) on the screen. Can I assume that this is a GPU problem? Maybe GPU and Logicboard?
    If it's the GPU, is it easily replaceable?
    THese are the screens with the kernel panic message and artifacts

    Greetings mig_akira,
    It seems your Mac is suffering from kernel panics, and video distortion. Based on the information you have provided, it appears your Mac needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Kernel panic and no reboot allowed. What next ?

    Hello,
    i have to apologize, i'm not very fluent in english. My MacPro 3.1 early 2008, quad-core 2.8 GHz Intel xeon started experience a permanent Kernel panic problem at boot six month ago. I tried many tips and tricks, reboot in safe mode, reboot without extensions, clean the p-RAM at startup. Nothing seemed to work and i constantly end up with a grey screen with weird white stripes on it and the kernel panic message (black background and reboot thingie).
    A bit upset, as i couldn't boot, i finally erased the disk and tried a brand new install.
    There, i got a message stating that i need at least 2 GHz memory to install... Wich I theorically got : 2x1 GHz DIMM DDR2. It seems only 1 GHz is taken in count
    (checked on a screenshot i previously printed of my mac specifications). I then thought i found the problem and tried switch the memory cards and bars. But it still remains helpless.
    I then owns a very heavy and expensive paperweight...
    Can anyone help me find what's wrong and get a new install ?

    It seems only 1 GHz is taken in count
    Some of your RAM memory has FAILED. That is the source of ALL your problems.

  • 2.1ghz iMac Kernel Panics and no CD startup

    Just got my Refurb iMac G5. Its 2.1ghz, the iSight model. I chose the Apple Certified Refurb because I work alot with Adobe Creative suite and heard that it wouldnt be UB for at least 2 years by which time I will have a new system.
    Anyhow, I bought a 1gb Samsung memory stick from OWC and have been getting Kernel Panics(6 in the last two days). Funny thing is, even when I removed the memory stick I still get the KP's. Secondly, my iMac will not strtup from the Applecare CD. I just get the gray screen with the circle slash through it.
    Back to the memory, I ran Disk Utility while booted from the startup disk and it showed a catalog error which Disk Utility could not repair, even when booted from the OSX install DVD. During this time period some crazy stuff was happenning, the computer would NOT startup at all, from strtup disk or cd drive. It wouldget to the Apple logo with the progress spinner under it and then just go black and shut off. It did this probably 15 out of 20 times during an hour. I then got it to finally start up by booting into the black screen with white type (forget hat it is called, single user or verbose or safe...?) ran fsck -f, which showed the same catalog error as before and said it still couldn't fix it. Finally got it to start up; So, I backed up all my files and zeroed out the whole 250gb drive and reinstalled OSX, ran all the Software Updates to get to 10.4.7 and am still getting Kernel Panics, and it still wont start up from the AppleCare cd.
    My questions are:
    I thought Samsung memory was Apple approved, what should I put in this iMac?
    Is there a known issue with 10.4.7 and iMac G5's with KP's?
    BTW, I ran Apple hardware test( the LONG one) and everything passed, even the RAM.
    Disk Utility now shows a verified and "ok" drive when I test it now; yet still I get KP's
    Thanks for any help, sorry for the long post but I wanted to assure clarity in my situation.
    offtopic- When I tried to enroll my iMac for my Apple care it told me I need to call Apple, any idea why? I bought the iMac and the Applecare on the same invoice.

    Hi swizcore, welcome to Discussions. Do you have any USB or Firewire devices connected to your Imac? These can sometime cause problem start ups. Try if possible to disconnect all but the USB keyboard and mouse and restart.
    As for memory most brands of RAM will work, more important is it the correct RAM for your Imac. The fact that you removed it and all that was in the Imac was apple (Hardwired RAM I beleive with iSights) I don't think it would be the problem YET
    I would definately be getting a hold of Apple ASAP this should not be happening and at the same time you can get the Apple care registered.
    Good luck and post back with results or if they don't find the problem. Bob :~))
    Imac G5 Rev B 20   Mac OS X (10.4.6)  

  • A Kernel Panic and two Crashes since updating to 10.8.1

    I've been running a 15" MacBook Pro (Mid 2009) for about a year and a half.  It's factory stock (no hardware modifications) with a 2.8 Core 2 Duo processor and 4gig RAM with a 500GB HD.  It came with 10.5 installed.  I upgraded to 10.6, 10.7 & 10.8 respectively.  Each time a new operating system came out, I did a clean install.  My system has been 100% reliable up until I installed the 10.8.1 update.  Since then, I've had a Kernel Panic and two separate crashes.
    I doubt it's a hardware issue as it's never been suspect before.  Also, I've run Disk Utility and verified the disk and permissions.  No Problems there.
    The first problem was the Kernel Panic, which occurred while I was in the guest account watching YouTube videos.  The system went to a gray screen then gave me the typical "Panic" message and rebooted itself.
    The second problem must have occurred while the computer was in sleep mode, as I don't recall any particular issue, but I found a CRASH log in the logs folder.
    Finally, I encountered the most recent crash while I was exiting out of the ADMIN account on my computer.  The system went to a gray screen with a rotating bezel indicator, and wouldn't return to the log-in screen.  I had to manually cycle the power button in order for the computer to reboot.
    I'm not sure what's going on. 

    Hi. Since updating to 10.8 I've had numerous kernel panics on start-up. A restart always worked successfully, but it's getting annoying. I started out by replacing the HD with an SSD. That didn't work. Then I resent the PRAM/NVRAM. That seemed to work. Then I upgraded to 10.8.1 - and we're back to kernel panics.
    Here's the log, and below it are photos of the initial kernel panic. :
    29/08/2012 10:30:58.000 bootlog[0]: BOOT_TIME 1346232658 0
    29/08/2012 10:31:00.000 kernel[0]: Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    29/08/2012 10:31:00.000 kernel[0]: vm_page_bootstrap: 859948 free pages and 114900 wired pages
    29/08/2012 10:31:00.000 kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
    29/08/2012 10:31:00.000 kernel[0]: zone leak detection enabled
    29/08/2012 10:31:00.000 kernel[0]: standard timeslicing quantum is 10000 us
    29/08/2012 10:31:00.000 kernel[0]: standard background quantum is 2500 us
    29/08/2012 10:31:00.000 kernel[0]: mig_table_max_displ = 74
    29/08/2012 10:31:00.000 kernel[0]: corecrypto kext started!
    29/08/2012 10:31:00.000 kernel[0]: Running kernel space in FIPS MODE
    29/08/2012 10:31:00.000 kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    29/08/2012 10:31:00.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS POST passed!
    29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Sandbox
    29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Quarantine
    29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    29/08/2012 10:31:00.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    29/08/2012 10:31:00.000 kernel[0]: The Regents of the University of California. All rights reserved.
    29/08/2012 10:31:00.000 kernel[0]: MAC Framework successfully initialized
    29/08/2012 10:31:00.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    29/08/2012 10:31:00.000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    29/08/2012 10:31:00.000 kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    29/08/2012 10:31:00.000 kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration begin ]
    29/08/2012 10:31:00.000 kernel[0]: console relocated to 0xf10010000
    29/08/2012 10:31:00.000 kernel[0]: PCI configuration changed (bridge=2 device=1 cardbus=0)
    29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration end, bridges 5 devices 18 ]
    29/08/2012 10:31:00.000 kernel[0]: NVEthernet::start - Built Jun 25 2012 17:20:40
    29/08/2012 10:31:00.000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    29/08/2012 10:31:00.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    29/08/2012 10:31:00.000 kernel[0]: rooting via boot-uuid from /chosen:
    29/08/2012 10:31:00.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    29/08/2012 10:31:00.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT512M4SSD2 Media/IOGUIDPartitionScheme/Aidan's SSD@2
    29/08/2012 10:31:00.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
    29/08/2012 10:31:00.000 kernel[0]: Kernel is LP64
    29/08/2012 10:31:00.000 kernel[0]: BTCOEXIST off
    29/08/2012 10:31:00.000 kernel[0]: BRCM tunables:
    29/08/2012 10:31:00.000 kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    29/08/2012 10:31:00.000 kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    29/08/2012 10:31:00.000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID d49a20fffefbdb82; max speed s800.
    29/08/2012 10:31:00.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    29/08/2012 10:30:58.141 com.apple.launchd[1]: *** launchd[1] has started up. ***
    29/08/2012 10:30:58.141 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    29/08/2012 10:30:59.971 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    29/08/2012 10:31:00.000 kernel[0]: NVEthernet: Ethernet address d4:9a:20:fb:db:82
    29/08/2012 10:31:00.000 kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:96:cc:0e
    29/08/2012 10:31:00.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    29/08/2012 10:31:00.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    29/08/2012 10:31:01.891 airportd[27]: _processDLILEvent: en1 attached (down)
    29/08/2012 10:31:02.000 kernel[0]: createVirtIf(): ifRole = 1
    29/08/2012 10:31:02.000 kernel[0]: in func createVirtualInterface ifRole = 1
    29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802049dc00
    29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    29/08/2012 10:31:02.000 kernel[0]: Created virtif 0xffffff802049dc00 p2p0
    29/08/2012 10:31:02.229 com.apple.SecurityServer[17]: Session 100000 created
    29/08/2012 10:31:02.000 kernel[0]: NVDANV50HAL loaded and registered.
    29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe
    29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
    29/08/2012 10:31:02.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    29/08/2012 10:31:02.000 kernel[0]: Previous Shutdown Cause: 3
    29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    29/08/2012 10:31:02.282 com.apple.SecurityServer[17]: Entering service
    29/08/2012 10:31:02.383 UserEventAgent[13]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    29/08/2012 10:31:02.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    29/08/2012 10:31:02.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    29/08/2012 10:31:03.000 kernel[0]: DSMOS has arrived
    29/08/2012 10:31:03.000 kernel[0]: macx_swapon SUCCESS
    29/08/2012 10:31:03.051 hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    29/08/2012 10:31:03.075 appleeventsd[61]: main: Starting up
    29/08/2012 10:31:03.105 mDNSResponder[49]: mDNSResponder mDNSResponder-379.27.1 (Aug  1 2012 20:12:04) starting OSXVers 12
    29/08/2012 10:31:03.176 configd[19]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    29/08/2012 10:31:03.177 configd[19]: DHCP en1: INIT transmit failed
    29/08/2012 10:31:03.202 loginwindow[52]: Login Window Application Started
    29/08/2012 10:31:03.279 awacsd[65]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
    29/08/2012 10:31:03.000 kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    29/08/2012 10:31:03.341 awacsd[65]: InnerStore CopyAllZones: no info in Dynamic Store
    29/08/2012 10:31:03.363 mDNSResponder[49]: D2D_IPC: Loaded
    29/08/2012 10:31:03.363 mDNSResponder[49]: D2DInitialize succeeded
    29/08/2012 10:31:03.530 com.apple.usbmuxd[37]: usbmuxd-268.5 on Apr  5 2012 at 15:33:48, running 64 bit
    29/08/2012 10:31:03.551 configd[19]: network changed: DNS*
    29/08/2012 10:31:03.441 systemkeychain[70]: done file: /var/run/systemkeychaincheck.done
    29/08/2012 10:31:03.563 configd[19]: setting hostname to "Aidan-Byrnes-Computer.local"
    29/08/2012 10:31:03.646 locationd[53]: NOTICE,Location icon should now be in state 0
    29/08/2012 10:31:03.674 mds[48]: (Normal) FMW: FMW 0 0
    29/08/2012 10:31:03.676 WindowServer[86]: Server is starting up
    29/08/2012 10:31:03.680 WindowServer[86]: Session 256 retained (2 references)
    29/08/2012 10:31:03.680 WindowServer[86]: Session 256 released (1 references)
    29/08/2012 10:31:03.703 WindowServer[86]: Session 256 retained (2 references)
    29/08/2012 10:31:03.705 WindowServer[86]: init_page_flip: page flip mode is on
    29/08/2012 10:31:03.779 coreservicesd[29]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    29/08/2012 10:31:03.881 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    29/08/2012 10:31:03.882 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    29/08/2012 10:31:04.048 netbiosd[72]: Unable to start NetBIOS name service:
    29/08/2012 10:31:04.249 WindowServer[86]: mux_initialize: Couldn't find any matches
    29/08/2012 10:31:04.276 WindowServer[86]: GLCompositor enabled for tile size [256 x 256]
    29/08/2012 10:31:04.276 WindowServer[86]: CGXGLInitMipMap: mip map mode is on
    29/08/2012 10:31:04.311 WindowServer[86]: WSMachineUsesNewStyleMirroring: false
    29/08/2012 10:31:04.312 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
    UUID
    29/08/2012 10:31:04.312 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    29/08/2012 10:31:04.323 WindowServer[86]: Created shield window 0x5 for display 0x04272240
    29/08/2012 10:31:04.324 WindowServer[86]: Created shield window 0x6 for display 0x003f003d
    29/08/2012 10:31:04.331 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
    UUID
    29/08/2012 10:31:04.331 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    29/08/2012 10:31:04.331 WindowServer[86]: CGXPerformInitialDisplayConfiguration
    29/08/2012 10:31:04.331 WindowServer[86]:   Display 0x04272240: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c89 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    29/08/2012 10:31:04.331 WindowServer[86]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
    29/08/2012 10:31:04.000 kernel[0]: 05f5e100  00100026  NVEthernet::setLinkStatus - Active
    29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
    29/08/2012 10:31:04.000 kernel[0]: 05f5e100  00100026  NVEthernet::setLinkStatus - Active
    29/08/2012 10:31:04.449 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x00003863, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    29/08/2012 10:31:04.452 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    29/08/2012 10:31:04.456 loginwindow[52]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    29/08/2012 10:31:04.469 hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    29/08/2012 10:31:04.517 WindowServer[86]: Unable to open IOHIDSystem (e00002bd)
    29/08/2012 10:31:04.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    29/08/2012 10:31:04.608 WindowServer[86]: Created shield window 0x7 for display 0x04272240
    29/08/2012 10:31:04.608 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3) for weird reason: 2
    29/08/2012 10:31:04.668 launchctl[97]: com.apple.findmymacmessenger: Already loaded
    29/08/2012 10:31:04.730 com.apple.SecurityServer[17]: Session 100005 created
    29/08/2012 10:31:04.770 hidd[56]: CGSShutdownServerConnections: Detaching application from window server
    29/08/2012 10:31:04.770 hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    29/08/2012 10:31:04.834 loginwindow[52]: Login Window Started Security Agent
    29/08/2012 10:31:04.950 SecurityAgent[107]: This is the first run
    29/08/2012 10:31:04.950 SecurityAgent[107]: MacBuddy was run = 0
    29/08/2012 10:31:05.015 SecurityAgent[107]: User info context values set for aidanbyrne
    29/08/2012 10:31:05.300 configd[19]: network changed: v4(en0+:134.220.228.104) DNS+ Proxy+ SMB
    29/08/2012 10:31:05.331 root[114]:  sntp sendpkt: sendto error: No route to host. Couldn't send packet!
    29/08/2012 10:31:05.331 root[114]: on_wire failed for server 0.0.0.17!
    29/08/2012 10:31:05.349 ntpd[34]: proto: precision = 1.000 usec
    29/08/2012 10:31:05.493 loginwindow[52]: Login Window - Returned from Security Agent
    29/08/2012 10:31:05.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::init][75.15] init is complete
    29/08/2012 10:31:05.522 loginwindow[52]: USER_PROCESS: 52 console
    29/08/2012 10:31:05.604 com.apple.launchd.peruser.501[115]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    29/08/2012 10:31:05.609 loginwindow[52]: Connection with distnoted server was invalidated
    29/08/2012 10:31:05.633 distnoted[118]: # distnote server agent  absolute time: 7.965250809   civil time: Wed Aug 29 10:31:05 2012   pid: 118 uid: 501  root: no
    29/08/2012 10:31:05.791 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    29/08/2012 10:31:05.808 com.apple.SecurityServer[17]: Session 100006 created
    29/08/2012 10:31:06.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::handleStart][75.15] returning 1
    29/08/2012 10:31:06.000 kernel[0]: [ffffff8021601c00][AppleMultitouchHIDEventDriver::start] entered
    29/08/2012 10:31:06.000 kernel[0]: [ffffff80216af100][AppleMultitouchDevice::start] entered
    29/08/2012 10:31:06.014 talagent[128]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:06.188 SystemUIServer[129]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:06.217 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:06.323 configd[19]: setting hostname to "wxp-itr11564.unv.wlv.ac.uk"
    29/08/2012 10:31:06.324 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    29/08/2012 10:31:06.888 NetworkBrowserAgent[139]: Starting NetworkBrowserAgent
    29/08/2012 10:31:07.016 Finder[130]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:07.142 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[157]) Exited with code: 2
    29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2) Throttling respawn: Will start in 10 seconds
    29/08/2012 10:31:07.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=159[GoogleSoftwareUp] clearing CS_VALID
    29/08/2012 10:31:07.527 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Library/CFMSupport/CNQL1212_ButtonManager.app
    29/08/2012 10:31:07.527 loginwindow[52]: Unable to lauch startup item: (null)
    29/08/2012 10:31:07.533 com.apple.launchd.peruser.501[115]: (com.apple.afpstat-qfa[156]) Exited with code: 2
    29/08/2012 10:31:07.742 Folder Actions Dispatcher[160]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:07.788 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app
    29/08/2012 10:31:07.788 loginwindow[52]: Unable to lauch startup item: (null)
    29/08/2012 10:31:07.892 System Events[166]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.135 NotificationCenter[146]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.413 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:08.506 coreaudiod[106]: 2012-08-29 10:31:08.505832 AM [AirPlay] Started browsing for _airplay._tcp.
    29/08/2012 10:31:08.507 coreaudiod[106]: 2012-08-29 10:31:08.507315 AM [AirPlay] Started browsing for _raop._tcp.
    29/08/2012 10:31:08.678 TISwitcher[168]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.736 com.apple.dock.extra[165]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.762 coreservicesd[29]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=129
    29/08/2012 10:31:09.026 GoogleSoftwareUpdateAgent[159]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    29/08/2012 10:31:08.046 CCAAgent[163]: ****************************************
    29/08/2012 10:31:08.047 CCAAgent[163]: **          CCA agent starts!         **
    29/08/2012 10:31:08.047 CCAAgent[163]: ****************************************
    29/08/2012 10:31:08.294 CCAAgent[163]: CCAAgent Logfiles: (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/event.log) (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/eventPrevious.log)
    29/08/2012 10:31:08.458 DictationIM[178]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.844 BezelServices 235.55[52]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
    29/08/2012 10:31:09.170 CCAAgent[163]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:09.292 blued[64]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    29/08/2012 10:31:09.415 locationd[187]: NOTICE,Location icon should now be in state 0
    29/08/2012 10:31:09.467 UserEventAgent[142]: cannot find fw daemon port 1102
    29/08/2012 10:31:10.036 CoreLocationAgent[189]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:11.013 Dropbox[167]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:11.424 CalendarAgent[153]: -[SOAPParser:0x7fb0d8c971e0 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
    29/08/2012 10:31:11.431 LKDCHelper[198]: Starting (uid=501)
    29/08/2012 10:31:11.458 CalendarAgent[153]: -[SOAPParser:0x7fb0d98b3560 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
    29/08/2012 10:31:11.459 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8c98230 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
    29/08/2012 10:31:11.495 CalendarAgent[153]: -[SOAPParser:0x7fb0d98f9e70 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
    29/08/2012 10:31:11.498 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8cea360 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
    29/08/2012 10:31:14.284 Image Capture Extension[214]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:14.316 CIJScannerRegister[215]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3) for weird reason: 2
    29/08/2012 10:31:16.224 awacsd[65]: Exiting
    29/08/2012 10:31:23.456 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[103]) Exit timeout elapsed (20 seconds). Killing
    29/08/2012 10:31:31.525 com.apple.SecurityServer[17]: Session 100002 created
    29/08/2012 10:31:36.000 kernel[0]: Sandbox: sandboxd(232) deny mach-lookup com.apple.coresymbolicationd
    29/08/2012 10:31:37.404 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelCrusher.component
    29/08/2012 10:31:37.409 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component/Contents
    29/08/2012 10:31:37.414 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component
    29/08/2012 10:31:37.419 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelPhat.component
    29/08/2012 10:31:37.424 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component/Contents
    29/08/2012 10:31:37.428 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component
    29/08/2012 10:31:37.433 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelSpace.component
    29/08/2012 10:31:37.438 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component/Contents
    29/08/2012 10:31:37.442 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component
    29/08/2012 10:31:47.300 Safari[242]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:47.327 WebProcess[244]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:50.474 PluginProcess[247]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:32:03.134 Safari[242]: CGContextClipToRect: invalid context 0x0
    29/08/2012 10:32:03.539 WebProcess[250]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:38:22.299 Dock[127]: no information back from LS about running process
    29/08/2012 10:38:22.373 Console[341]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:41:22.416 com.apple.launchd.peruser.501[115]: (com.apple.KerberosHelper.LKDCHelper[198]) Exited with code: 1

  • Kernel Panic and monitor light flashes short-short-long-related?

    Greetings, all. It appeared my computer was free of its long-running kernel panics, and then the KPs returned. Before the KPs became an issue, the monitor started the short-short-long error warning on the power light. Is it >possible< that the monitor error can cause a KP? I ignored the monitor issue (the top half of the screen has faded slightly but didn't compel me to get a new one), and I do not have a spare monitor to connect to do a test.
    Thanks for your help.
    Vince

    It's hard for us to say. Best would be to run the Apple Hardware Test disk that shipped with your Mac, and see if it flags any hardware; monitor for example.
    Cheers!
    DALE

  • Kernel panic and possible bad hard drive?  HELP!!!

    I've been running my G4 iMac without any trouble for just shy of 4 years now. On Monday night I clicked on a menu on the Netflix web page and the computer crashed. I later figured out this was a full on kernel panic.
    I happened to have Tuesday off so I spent my time backing up as much of my files as I could. While backing up the computer would occasionally have another kernel panic and freeze. Sometimes the screen would look like this (http://www.tallgrassrestoration.com/kernelpanic2.jpg), sometimes it would look like this (http://www.tallgrassrestoration.com/kernelpanic1.jpg). Eventually it just stopped starting up, as of now it just gives me a folding icon with a flashing question mark on it. I got all the files I really need burned onto DVDs, but there are still many files I would rather not lose.
    I can boot it up from the OS 10.3 install disk, but the installer software does not recognize the hard drive, i.e. it does not list it as a location to install the operating system. The Disk tools does recognize the hard disk but comes up with a nasty error when I try to 'repair' the volume and will not proceed. The erase option looks like it would work, but I'd rather not go there... yet.
    So I believe I have a hard disk issue. Because I don't hear any associated noises I am hoping its not hardware related, but rather a corruption in the sector where the system software is store.
    Does anyone have any advice how I can proceed? Is there any way I can just use my wife's iBook and treat the iMac like an external hard drive and remove the last of my files that way? Any way I can repair this problem without wiping out or replacing the hard drive?
    thanks,

    A couple of years ago I accidentally bought and installed two incompatible modules. I would get Kernel Panics 3 or 4 times a day. When I removed the factory module these KP dropped to a once every day or so. I would suggest you monitor closely for a while longer until we can be sure that both modules are good. 
    It's possible it was the RAM seating but I'd be more suspicious than that; you could always try re-installing it.
    Most RAM comes with a lifetime warranty so even if it was some time ago it's worth contacting the reseller.
    I use a magnetic screwdriver with torx bits too, but did keep it away from all the chips and boards.
    Let us know how you get on.
    cheers
    mrtotes

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Movement of stocks in quality inspection from warehouse to warehouse

    We are currently implementing SAP with WM and was told that material that is produced on our production lines that is received via GR transaction into Quality Inspection status cannot be moved from one warehouse in WM to another warehouse in WM even

  • Language Selection in UDI has no effect

    I started this topic while ago on ConfMgr forum, but I didn´t get any decent answer, I also found this Blog but it doesn´t work for me with MDT 2013 I have MDT 2013 integration in ConfMgr 2012 R2 and I use MDT based Task Sequence with UDI. If I selec

  • 8900 send allways emails

    Please i have Blackberry 8900, i have Gmail adress , i can send and take email, but to my email go email with text : This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to

  • Photosmart 6510 print option not highlighted

    With windows 7, I can print when using Word but if I want to print emails or from the internet I can only do so on my ophotosmart 6510 by first saving to the desktop. The save option is available but there is no response from the print option which i

  • How can I shift my acrobat from old computer to new one?

    I have intalled adobe acrobat standard on last November to my computer. Now this computer broke down and I would need to move this software to new computer. How is this possible? I have serial number.