Kernel Panic and Disk Utility
I have a 12" 1.5 gHz PowerBook that runs almost flawlessly. Today I experienced my first kernel panic while running Call of Duty. My PB has Photoshop Elements 4, Popcorn 2, Dreamweaver MX, Macaroni, Tinkertool, and LittleSnitch as the only software other than what came with it. I am running 10.4.7. I also recently downloaded and installed the firmware update for my superdrive.
When I did the update to 10.4.7, I did all the things to make it go right, no problems until today and I don't think it is the update. I ran disk utility, verified disk, it indicated it needed repair so I attempted to repair it. It had something about 8 or 20 leaf? in the window and when it completed repair, it said HFS was repaired but volume could not be? Now when I verify, it says, "Incorrect number of extended attributes? and it won't repair. Now I am flummoxed. Ran TechTool Deluxe since I am on Applecare and it could not find anything, and I assume that the problem is something it won't find or repair. What is my next step? The PB is running well and this is the first time it has had a kernel panic. El P
hi el perdido--
did you try running disk utility a number of times?? also, you should repair disk and then select the first drive (not macintosh hd, but the other one) to see if smart status is available. it should say "verified". smart status is not always available. if you can't get it repaired, you could always try disk warrior. and if diskwarrior doesn't fix it, you will have to back up all info (which you should do right now anyway, if you think it's possible you can't repair your volume) and then erase and install. you can back up your info on an external drive, on disk, or if you have access to another mac, you can use firewire target disk mode. http://docs.info.apple.com/article.html?artnum=58583. let me know how it going. [ 8 ) ]
Similar Messages
-
First Kernel Panic - failed Disk Utility volume repair - Help?
Hello!
Well, you've seen the subject. 2 nights ago, after a long day of iTunes, Photoshop, Final Cut Express, and Halo, my powerbook had it's first kernel panic. When? When I unplugged my Lexar JD Lightning flash drive. I had just copied about 200 MB of music onto it (to copy to my imac), and ejected it. Instant panic.
Well, after a reboot, I ran disk warrior on all of my external drives - 2 USB (Western Digital 120GB, Iomega Exite 80GB), my Seagate 400 GB combo drive (Firewire), with 2 volumes, and my 4G clickwheel iPod - well, it's FAT32, so it didn't check it. (For use copying files to our winbox)
It worked properly, until I tried to repair the Iomega drive. It froze. Force reboot.
So, now I ran disk utility on my internal drive. While it was running, Backup started, and everything locked up. Force reboot again.
It rebooted and loged in just fine, so I restarted to the OS X install DVD (the one that came with the Powerbook - 10.3.7). I ran disk utility on Macintosh HD (boot drive). Permissions verification showed a few "special permissions". Permissions repair worked just fine. Disk verification found issues, and repair didn't work. It gave the following error while running:
"Invalid leaf record count. Should be 1 instead of 302"
In big bold letters, repairs failed. Odd, it checked 2 volumes -
at the bottom, it said
"Repair attempted on 2 volumes: (green text) 1 HFS volume repaired. (next line, red) 1 volume could not be repaired.
Right above this, in the progress window, it stated:
"The volume Macintosh HD was repaired successfully"
So, what? Is the second volume the install DVD?
My powerbook is running just fine, so I ran backup again. (the .Mac backup application from Apple)
Then, I ran Tech Tool Deluxe (3.03) - included on the AppleCare CD that came with our Applecare subscription for my Powerbook. It found no issues at all.
So, i'm clueless. I have not noticed any other issues. At least, since the issue.
Before this happened, I've noticed a few glitches. One is that iTunes has slowed down, particularly when changing tracks. The other is the menu bar battery indicator - sometimes it disappears - rather, the indicator. The space that it occupies in the menu bar remains empty, until you click on it - then it shows up fine. What's odd is that it's only the text - it's otherwise just fine.
What happened before the issue began? Well, I installed a new PNY ram card back around Easter - if that's the culprit, shouldn't it have shown an issue before now? Second: Installs. A few widgets, and a couple of applications: OS 10.4.7 and all other updates Software Update had to offer, Toast 7.1 update, Comic Life's new Universal version (a minor update, actually), Microsoft Office update (heh, probably that), and the trial of Salling Clicker - it's quite cool - Macworld (Aug 06 - new issue) gave the right rating (5 mice!). I dont' run permission checks enough, I know.
A while back, (like 10 months ago) my Powerbook wouldn't go to sleep. It turned out that it was one particular USB 2.0 hub - disconnecting it solved the issue. Its not unlike how my Seagate FW drive will keep my iMac from booting properly every now and then.
So, here are the questions:
1. What is the "leaf record count"? Is it very critical? Is it part of the physical HDD, or the system?
2. Powerbook's running fine, and no other issues. Is it okay to run?
3. If I need to repair/reformat (eventually), will it be sooner or later?
4. This seems rather odd, and very intermittant. How do I find out what the issue is?
5. What is the second, mysterious volume? Macintosh HD is not partitioned. (Could it be Classic?)
6. if the SMART status of the internal drive reports just fine, could it be missing something?
Thanks,
Daniel
15" 1.67 Powerbook G4 (non-HiRes), Slot loading iMac DV SE Mac OS X (10.4.7) 1G RAM on PB, 384 MB iMac.Techtool Deluxe you want to be running version 3.0.4. Version 3.0.3 is not compatible with 10.4 and may be causing the leaf count issues. Here's the link to get an updated Techtool Deluxe:
https://support.apple.com/techtooldeluxe/main?id=dl
My suggestion is to start to simplify everything here. Leave everything disconnected from the machine, and boot off the Disk Warrior 3.0.3 CD, and repair the internal drive first. Use the Option key to boot:
http://docs.info.apple.com/article.html?artnum=106178
Once you are able to do that, then see if you can repair the external drives.
RAM issues can crop up at anytime, and without warning. No test can detect all bad RAM, but once detected, then you know it is accurate. -
Can't update to 10.6.8 kernel panic and pcscd.pub wrong block count
Hi there, as the title said, I cannot update to the recent 10.6.8 v1.1 (nor v1 for what it matters). All seems going fine till the iMac reboots, then a kernel panic is generated. Only way out is to reinstall 10.6.7 COMBO.
Both Disk Utility and Disk Warrior agree on the issue, they both say they have repaired and the iMac goes into kernel panic with again pcscd.pub block count error (should be 16 instead of 17). Re-installing 10.6.7 everything is happy again.
Any idea? Hard disk tests with Disk Warriors show nothing and the HD is journaled.See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
A Kernel Panic and two Crashes since updating to 10.8.1
I've been running a 15" MacBook Pro (Mid 2009) for about a year and a half. It's factory stock (no hardware modifications) with a 2.8 Core 2 Duo processor and 4gig RAM with a 500GB HD. It came with 10.5 installed. I upgraded to 10.6, 10.7 & 10.8 respectively. Each time a new operating system came out, I did a clean install. My system has been 100% reliable up until I installed the 10.8.1 update. Since then, I've had a Kernel Panic and two separate crashes.
I doubt it's a hardware issue as it's never been suspect before. Also, I've run Disk Utility and verified the disk and permissions. No Problems there.
The first problem was the Kernel Panic, which occurred while I was in the guest account watching YouTube videos. The system went to a gray screen then gave me the typical "Panic" message and rebooted itself.
The second problem must have occurred while the computer was in sleep mode, as I don't recall any particular issue, but I found a CRASH log in the logs folder.
Finally, I encountered the most recent crash while I was exiting out of the ADMIN account on my computer. The system went to a gray screen with a rotating bezel indicator, and wouldn't return to the log-in screen. I had to manually cycle the power button in order for the computer to reboot.
I'm not sure what's going on.Hi. Since updating to 10.8 I've had numerous kernel panics on start-up. A restart always worked successfully, but it's getting annoying. I started out by replacing the HD with an SSD. That didn't work. Then I resent the PRAM/NVRAM. That seemed to work. Then I upgraded to 10.8.1 - and we're back to kernel panics.
Here's the log, and below it are photos of the initial kernel panic. :
29/08/2012 10:30:58.000 bootlog[0]: BOOT_TIME 1346232658 0
29/08/2012 10:31:00.000 kernel[0]: Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
29/08/2012 10:31:00.000 kernel[0]: vm_page_bootstrap: 859948 free pages and 114900 wired pages
29/08/2012 10:31:00.000 kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
29/08/2012 10:31:00.000 kernel[0]: zone leak detection enabled
29/08/2012 10:31:00.000 kernel[0]: standard timeslicing quantum is 10000 us
29/08/2012 10:31:00.000 kernel[0]: standard background quantum is 2500 us
29/08/2012 10:31:00.000 kernel[0]: mig_table_max_displ = 74
29/08/2012 10:31:00.000 kernel[0]: corecrypto kext started!
29/08/2012 10:31:00.000 kernel[0]: Running kernel space in FIPS MODE
29/08/2012 10:31:00.000 kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
29/08/2012 10:31:00.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS POST passed!
29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Sandbox
29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Quarantine
29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
29/08/2012 10:31:00.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
29/08/2012 10:31:00.000 kernel[0]: The Regents of the University of California. All rights reserved.
29/08/2012 10:31:00.000 kernel[0]: MAC Framework successfully initialized
29/08/2012 10:31:00.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
29/08/2012 10:31:00.000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
29/08/2012 10:31:00.000 kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
29/08/2012 10:31:00.000 kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration begin ]
29/08/2012 10:31:00.000 kernel[0]: console relocated to 0xf10010000
29/08/2012 10:31:00.000 kernel[0]: PCI configuration changed (bridge=2 device=1 cardbus=0)
29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration end, bridges 5 devices 18 ]
29/08/2012 10:31:00.000 kernel[0]: NVEthernet::start - Built Jun 25 2012 17:20:40
29/08/2012 10:31:00.000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
29/08/2012 10:31:00.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
29/08/2012 10:31:00.000 kernel[0]: rooting via boot-uuid from /chosen:
29/08/2012 10:31:00.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
29/08/2012 10:31:00.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT512M4SSD2 Media/IOGUIDPartitionScheme/Aidan's SSD@2
29/08/2012 10:31:00.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
29/08/2012 10:31:00.000 kernel[0]: Kernel is LP64
29/08/2012 10:31:00.000 kernel[0]: BTCOEXIST off
29/08/2012 10:31:00.000 kernel[0]: BRCM tunables:
29/08/2012 10:31:00.000 kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
29/08/2012 10:31:00.000 kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
29/08/2012 10:31:00.000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID d49a20fffefbdb82; max speed s800.
29/08/2012 10:31:00.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
29/08/2012 10:30:58.141 com.apple.launchd[1]: *** launchd[1] has started up. ***
29/08/2012 10:30:58.141 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
29/08/2012 10:30:59.971 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
29/08/2012 10:31:00.000 kernel[0]: NVEthernet: Ethernet address d4:9a:20:fb:db:82
29/08/2012 10:31:00.000 kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:96:cc:0e
29/08/2012 10:31:00.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
29/08/2012 10:31:00.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
29/08/2012 10:31:01.891 airportd[27]: _processDLILEvent: en1 attached (down)
29/08/2012 10:31:02.000 kernel[0]: createVirtIf(): ifRole = 1
29/08/2012 10:31:02.000 kernel[0]: in func createVirtualInterface ifRole = 1
29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802049dc00
29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
29/08/2012 10:31:02.000 kernel[0]: Created virtif 0xffffff802049dc00 p2p0
29/08/2012 10:31:02.229 com.apple.SecurityServer[17]: Session 100000 created
29/08/2012 10:31:02.000 kernel[0]: NVDANV50HAL loaded and registered.
29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe
29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
29/08/2012 10:31:02.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
29/08/2012 10:31:02.000 kernel[0]: Previous Shutdown Cause: 3
29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
29/08/2012 10:31:02.282 com.apple.SecurityServer[17]: Entering service
29/08/2012 10:31:02.383 UserEventAgent[13]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
29/08/2012 10:31:02.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
29/08/2012 10:31:02.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
29/08/2012 10:31:03.000 kernel[0]: DSMOS has arrived
29/08/2012 10:31:03.000 kernel[0]: macx_swapon SUCCESS
29/08/2012 10:31:03.051 hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
29/08/2012 10:31:03.075 appleeventsd[61]: main: Starting up
29/08/2012 10:31:03.105 mDNSResponder[49]: mDNSResponder mDNSResponder-379.27.1 (Aug 1 2012 20:12:04) starting OSXVers 12
29/08/2012 10:31:03.176 configd[19]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
29/08/2012 10:31:03.177 configd[19]: DHCP en1: INIT transmit failed
29/08/2012 10:31:03.202 loginwindow[52]: Login Window Application Started
29/08/2012 10:31:03.279 awacsd[65]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
29/08/2012 10:31:03.000 kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
29/08/2012 10:31:03.341 awacsd[65]: InnerStore CopyAllZones: no info in Dynamic Store
29/08/2012 10:31:03.363 mDNSResponder[49]: D2D_IPC: Loaded
29/08/2012 10:31:03.363 mDNSResponder[49]: D2DInitialize succeeded
29/08/2012 10:31:03.530 com.apple.usbmuxd[37]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 64 bit
29/08/2012 10:31:03.551 configd[19]: network changed: DNS*
29/08/2012 10:31:03.441 systemkeychain[70]: done file: /var/run/systemkeychaincheck.done
29/08/2012 10:31:03.563 configd[19]: setting hostname to "Aidan-Byrnes-Computer.local"
29/08/2012 10:31:03.646 locationd[53]: NOTICE,Location icon should now be in state 0
29/08/2012 10:31:03.674 mds[48]: (Normal) FMW: FMW 0 0
29/08/2012 10:31:03.676 WindowServer[86]: Server is starting up
29/08/2012 10:31:03.680 WindowServer[86]: Session 256 retained (2 references)
29/08/2012 10:31:03.680 WindowServer[86]: Session 256 released (1 references)
29/08/2012 10:31:03.703 WindowServer[86]: Session 256 retained (2 references)
29/08/2012 10:31:03.705 WindowServer[86]: init_page_flip: page flip mode is on
29/08/2012 10:31:03.779 coreservicesd[29]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
29/08/2012 10:31:03.881 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29/08/2012 10:31:03.882 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29/08/2012 10:31:04.048 netbiosd[72]: Unable to start NetBIOS name service:
29/08/2012 10:31:04.249 WindowServer[86]: mux_initialize: Couldn't find any matches
29/08/2012 10:31:04.276 WindowServer[86]: GLCompositor enabled for tile size [256 x 256]
29/08/2012 10:31:04.276 WindowServer[86]: CGXGLInitMipMap: mip map mode is on
29/08/2012 10:31:04.311 WindowServer[86]: WSMachineUsesNewStyleMirroring: false
29/08/2012 10:31:04.312 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
UUID
29/08/2012 10:31:04.312 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
29/08/2012 10:31:04.323 WindowServer[86]: Created shield window 0x5 for display 0x04272240
29/08/2012 10:31:04.324 WindowServer[86]: Created shield window 0x6 for display 0x003f003d
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
UUID
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
29/08/2012 10:31:04.331 WindowServer[86]: CGXPerformInitialDisplayConfiguration
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c89 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
29/08/2012 10:31:04.000 kernel[0]: 05f5e100 00100026 NVEthernet::setLinkStatus - Active
29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
29/08/2012 10:31:04.000 kernel[0]: 05f5e100 00100026 NVEthernet::setLinkStatus - Active
29/08/2012 10:31:04.449 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x00003863, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
29/08/2012 10:31:04.452 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
29/08/2012 10:31:04.456 loginwindow[52]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
29/08/2012 10:31:04.469 hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
29/08/2012 10:31:04.517 WindowServer[86]: Unable to open IOHIDSystem (e00002bd)
29/08/2012 10:31:04.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
29/08/2012 10:31:04.608 WindowServer[86]: Created shield window 0x7 for display 0x04272240
29/08/2012 10:31:04.608 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3) for weird reason: 2
29/08/2012 10:31:04.668 launchctl[97]: com.apple.findmymacmessenger: Already loaded
29/08/2012 10:31:04.730 com.apple.SecurityServer[17]: Session 100005 created
29/08/2012 10:31:04.770 hidd[56]: CGSShutdownServerConnections: Detaching application from window server
29/08/2012 10:31:04.770 hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
29/08/2012 10:31:04.834 loginwindow[52]: Login Window Started Security Agent
29/08/2012 10:31:04.950 SecurityAgent[107]: This is the first run
29/08/2012 10:31:04.950 SecurityAgent[107]: MacBuddy was run = 0
29/08/2012 10:31:05.015 SecurityAgent[107]: User info context values set for aidanbyrne
29/08/2012 10:31:05.300 configd[19]: network changed: v4(en0+:134.220.228.104) DNS+ Proxy+ SMB
29/08/2012 10:31:05.331 root[114]: sntp sendpkt: sendto error: No route to host. Couldn't send packet!
29/08/2012 10:31:05.331 root[114]: on_wire failed for server 0.0.0.17!
29/08/2012 10:31:05.349 ntpd[34]: proto: precision = 1.000 usec
29/08/2012 10:31:05.493 loginwindow[52]: Login Window - Returned from Security Agent
29/08/2012 10:31:05.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::init][75.15] init is complete
29/08/2012 10:31:05.522 loginwindow[52]: USER_PROCESS: 52 console
29/08/2012 10:31:05.604 com.apple.launchd.peruser.501[115]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
29/08/2012 10:31:05.609 loginwindow[52]: Connection with distnoted server was invalidated
29/08/2012 10:31:05.633 distnoted[118]: # distnote server agent absolute time: 7.965250809 civil time: Wed Aug 29 10:31:05 2012 pid: 118 uid: 501 root: no
29/08/2012 10:31:05.791 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
29/08/2012 10:31:05.808 com.apple.SecurityServer[17]: Session 100006 created
29/08/2012 10:31:06.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::handleStart][75.15] returning 1
29/08/2012 10:31:06.000 kernel[0]: [ffffff8021601c00][AppleMultitouchHIDEventDriver::start] entered
29/08/2012 10:31:06.000 kernel[0]: [ffffff80216af100][AppleMultitouchDevice::start] entered
29/08/2012 10:31:06.014 talagent[128]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:06.188 SystemUIServer[129]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:06.217 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:06.323 configd[19]: setting hostname to "wxp-itr11564.unv.wlv.ac.uk"
29/08/2012 10:31:06.324 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
29/08/2012 10:31:06.888 NetworkBrowserAgent[139]: Starting NetworkBrowserAgent
29/08/2012 10:31:07.016 Finder[130]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:07.142 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[157]) Exited with code: 2
29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2) Throttling respawn: Will start in 10 seconds
29/08/2012 10:31:07.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=159[GoogleSoftwareUp] clearing CS_VALID
29/08/2012 10:31:07.527 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Library/CFMSupport/CNQL1212_ButtonManager.app
29/08/2012 10:31:07.527 loginwindow[52]: Unable to lauch startup item: (null)
29/08/2012 10:31:07.533 com.apple.launchd.peruser.501[115]: (com.apple.afpstat-qfa[156]) Exited with code: 2
29/08/2012 10:31:07.742 Folder Actions Dispatcher[160]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:07.788 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app
29/08/2012 10:31:07.788 loginwindow[52]: Unable to lauch startup item: (null)
29/08/2012 10:31:07.892 System Events[166]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.135 NotificationCenter[146]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.413 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:08.506 coreaudiod[106]: 2012-08-29 10:31:08.505832 AM [AirPlay] Started browsing for _airplay._tcp.
29/08/2012 10:31:08.507 coreaudiod[106]: 2012-08-29 10:31:08.507315 AM [AirPlay] Started browsing for _raop._tcp.
29/08/2012 10:31:08.678 TISwitcher[168]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.736 com.apple.dock.extra[165]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.762 coreservicesd[29]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=129
29/08/2012 10:31:09.026 GoogleSoftwareUpdateAgent[159]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
29/08/2012 10:31:08.046 CCAAgent[163]: ****************************************
29/08/2012 10:31:08.047 CCAAgent[163]: ** CCA agent starts! **
29/08/2012 10:31:08.047 CCAAgent[163]: ****************************************
29/08/2012 10:31:08.294 CCAAgent[163]: CCAAgent Logfiles: (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/event.log) (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/eventPrevious.log)
29/08/2012 10:31:08.458 DictationIM[178]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.844 BezelServices 235.55[52]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
29/08/2012 10:31:09.170 CCAAgent[163]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:09.292 blued[64]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
29/08/2012 10:31:09.415 locationd[187]: NOTICE,Location icon should now be in state 0
29/08/2012 10:31:09.467 UserEventAgent[142]: cannot find fw daemon port 1102
29/08/2012 10:31:10.036 CoreLocationAgent[189]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:11.013 Dropbox[167]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:11.424 CalendarAgent[153]: -[SOAPParser:0x7fb0d8c971e0 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
29/08/2012 10:31:11.431 LKDCHelper[198]: Starting (uid=501)
29/08/2012 10:31:11.458 CalendarAgent[153]: -[SOAPParser:0x7fb0d98b3560 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
29/08/2012 10:31:11.459 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8c98230 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
29/08/2012 10:31:11.495 CalendarAgent[153]: -[SOAPParser:0x7fb0d98f9e70 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
29/08/2012 10:31:11.498 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8cea360 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
29/08/2012 10:31:14.284 Image Capture Extension[214]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:14.316 CIJScannerRegister[215]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3) for weird reason: 2
29/08/2012 10:31:16.224 awacsd[65]: Exiting
29/08/2012 10:31:23.456 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[103]) Exit timeout elapsed (20 seconds). Killing
29/08/2012 10:31:31.525 com.apple.SecurityServer[17]: Session 100002 created
29/08/2012 10:31:36.000 kernel[0]: Sandbox: sandboxd(232) deny mach-lookup com.apple.coresymbolicationd
29/08/2012 10:31:37.404 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelCrusher.component
29/08/2012 10:31:37.409 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component/Contents
29/08/2012 10:31:37.414 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component
29/08/2012 10:31:37.419 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelPhat.component
29/08/2012 10:31:37.424 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component/Contents
29/08/2012 10:31:37.428 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component
29/08/2012 10:31:37.433 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelSpace.component
29/08/2012 10:31:37.438 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component/Contents
29/08/2012 10:31:37.442 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component
29/08/2012 10:31:47.300 Safari[242]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:47.327 WebProcess[244]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:50.474 PluginProcess[247]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:32:03.134 Safari[242]: CGContextClipToRect: invalid context 0x0
29/08/2012 10:32:03.539 WebProcess[250]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:38:22.299 Dock[127]: no information back from LS about running process
29/08/2012 10:38:22.373 Console[341]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:41:22.416 com.apple.launchd.peruser.501[115]: (com.apple.KerberosHelper.LKDCHelper[198]) Exited with code: 1 -
Having Problems with Kernel Panics and an External Hard Drive
I've been having Kernel Panics for a month now and have yet to resolve the issue. I know about Dr. Smokes guide to resolving them, but I'm working on a time-sensitive editing project in Final Cut Pro and therefore have not had time to fix my computer.
I am using an OWC external hard drive for the project, and today when I had a kernel panic and I rebooted my computer as I normally do. But, this time, my external hard drive icon was not on my desktop, and a message popped up that said, "The disc you inserted was not readable by this computer." Is there anyway to remedy this so that my computer reads my hard drive?Have you tried using Disk Utility to repair your ext. hard drive as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption?
Cheers!
DALE -
Help with kernel panic and freezing screen?
A few months ago I had kernel panic screens about twice, but the problem didn't recur again for a while. Over the last two weeks, however, I've had two more kernel panics, and the screen freezes (mouse, all actions, etc) and the machine has to be manually restarted about every five minutes.
I've tested the two ram sticks, erased and re-installed the OS but had no luck resolving the issue.
I followed the link on resolving kernel panic problems from earlier threads to troubleshoot as much as possible. I don't have the original software so can't do a few steps, but on the whole have had no luck.
I don't have any external or USB devices hooked up when it fails. I do occasionally use USB pen drives, but that doesn't seem to be related. I bought a new, non-apple power source a while back, too, but also don't think that's related.
Before I bought the laptop from a friend, he installed a different hard drive, but I believe it came from another G4 Ti machine. He left two screws out of the bottom of the case.
I'm thinking mainboard or possible hard drive? Any ideas?
Also, since reinstalling the harddrive, I've had no error report message come up when the machine restarts, and there isn't an error log file, at least not for kernel panics (that I can find.) Before I reinstalled the OS, I read the error reports and they said something about kernels....but I don't remember what, specifically.
If there are other useful logs I could post, let me know and I'll find them. Are the console logs or directory service logs of any use?
Thanks in advance for any help or any advice...!
PowerBook G4 Ti Mac OS X (10.4)
PowerBook G4 Ti Mac OS X (10.4)Hi tjk
- Thanks for the help.
I've tested the two ram sticks
How?
I took out each stick one at a time and ran the machine with a single instead of both.
I have dual 256 sticks. The original, and a Samsung which came with it when I bought it used.
In both cases, the same problem occurred.
How much free space do you have available on your HD?
If not 5GB or more, this could be causing issues.
I had about 20GB free. Now it's running with 70Gb free and still the same problems. It's an 80 GB hard drive that was installed into the PB when I bought it a few months ago. I had the machine for about three weeks first, and didn't have any of these problems with the other hard drive in it.
I don't have the install disk, so can't run the disk utility repair, correct. I've also not been able to get the PB to boot from the disk instead of the hard drive. It brings up only the hard drive as a selection to boot from, and spins up the OSX DVD, then ejects it each time.
...not sure why...I've been holding down option when restarting to boot from other drives -- if there's another way to boot from the disk, maybe that would work...
Have a look at the Orange Ribbon Cable Issue/Fix and see if
it might apply to your PB. Which Ti do you have btw?
This is a really interesting link and for a bit I thought it sounded exactly like the problem...but I have the original TiBook, 500 Mhz so the trackpad cable doesn't run through the same spot. Maybe there's something else shorting out or pinching underneath...I'll take a look, but I'm not necessarily hardware savvy enough to know what to look for.
Thanks again for any suggestions.
PowerBook G4 Ti Mac OS X (10.4) -
2.1ghz iMac Kernel Panics and no CD startup
Just got my Refurb iMac G5. Its 2.1ghz, the iSight model. I chose the Apple Certified Refurb because I work alot with Adobe Creative suite and heard that it wouldnt be UB for at least 2 years by which time I will have a new system.
Anyhow, I bought a 1gb Samsung memory stick from OWC and have been getting Kernel Panics(6 in the last two days). Funny thing is, even when I removed the memory stick I still get the KP's. Secondly, my iMac will not strtup from the Applecare CD. I just get the gray screen with the circle slash through it.
Back to the memory, I ran Disk Utility while booted from the startup disk and it showed a catalog error which Disk Utility could not repair, even when booted from the OSX install DVD. During this time period some crazy stuff was happenning, the computer would NOT startup at all, from strtup disk or cd drive. It wouldget to the Apple logo with the progress spinner under it and then just go black and shut off. It did this probably 15 out of 20 times during an hour. I then got it to finally start up by booting into the black screen with white type (forget hat it is called, single user or verbose or safe...?) ran fsck -f, which showed the same catalog error as before and said it still couldn't fix it. Finally got it to start up; So, I backed up all my files and zeroed out the whole 250gb drive and reinstalled OSX, ran all the Software Updates to get to 10.4.7 and am still getting Kernel Panics, and it still wont start up from the AppleCare cd.
My questions are:
I thought Samsung memory was Apple approved, what should I put in this iMac?
Is there a known issue with 10.4.7 and iMac G5's with KP's?
BTW, I ran Apple hardware test( the LONG one) and everything passed, even the RAM.
Disk Utility now shows a verified and "ok" drive when I test it now; yet still I get KP's
Thanks for any help, sorry for the long post but I wanted to assure clarity in my situation.
offtopic- When I tried to enroll my iMac for my Apple care it told me I need to call Apple, any idea why? I bought the iMac and the Applecare on the same invoice.Hi swizcore, welcome to Discussions. Do you have any USB or Firewire devices connected to your Imac? These can sometime cause problem start ups. Try if possible to disconnect all but the USB keyboard and mouse and restart.
As for memory most brands of RAM will work, more important is it the correct RAM for your Imac. The fact that you removed it and all that was in the Imac was apple (Hardwired RAM I beleive with iSights) I don't think it would be the problem YET
I would definately be getting a hold of Apple ASAP this should not be happening and at the same time you can get the Apple care registered.
Good luck and post back with results or if they don't find the problem. Bob :~))
Imac G5 Rev B 20 Mac OS X (10.4.6) -
Constant Kernel Panic and "You Need to Restart" screen
Hello all! I installed Leopard on my Powerbook G4 yesterday. I did the default upgrade. I then went through Software Update to get up to 10.5.4. I am getting Kernel Panics galore. Here are the latest results from the report:
Wed Jul 30 08:10:20 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000015153E0C PC=0x00000000000B13EC
Latest crash info for cpu 0:
Exception state (sv=0x12df9a00)
PC=0x000B13EC; MSR=0x00001030; DAR=0x15153E0C; DSISR=0x40000000; LR=0x000AFCC8; R1=0x12F8BC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0003F460 0x000B0048 0x000B031C 0x000367C4 0x00036BF4 0x0003F9F0
0x000B05D4
Proceeding back via exception chain:
Exception state (sv=0x12df9a00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x16d7ec80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:36:17 PDT 2008; root:xnu-1228.5.20~1/RELEASE_PPC
System model name: PowerBook6,2
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B498 0x0009BE3C 0x00029DD8 0x000AF210 0x000B2A78
Proceeding back via exception chain:
Exception state (sv=0x12df9a00)
PC=0x000B13EC; MSR=0x00001030; DAR=0x15153E0C; DSISR=0x40000000; LR=0x000AFCC8; R1=0x12F8BC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0003F460 0x000B0048 0x000B031C 0x000367C4 0x00036BF4 0x0003F9F0
0x000B05D4
Exception state (sv=0x16d7ec80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
I have tried creating a clean account, but the same thing keeps happening. I have also noticed that Spotlight re-indexes almost every time I have to restart.
Thanks in advance for the help! (BTW, I am posting this from another computer...)Okay, here is the latest.
I ran both the Apple Hardware Test and Rember to check the system. Both checked out fine.
I used Carbon Copy Cloner to make a bootable backup. It had no trouble making the backup, but it wouldn't boot the machine.
I then used the Leopard Retail disc (10.5.1) and Disk Utility to erase my HD. I used the Zero-out method.
As I am sitting here right now, the "You need to restart" screen just came up. This is after starting up with the DVD and erasing the HD.
Any ideas or suggestions?
Thanks!! -
My MBP is Kernel Panicing, and I see the Crash Report is at 107% CPU
My fans are spinning quickly, and the whole thing sounds like a Jet Plane, even when no programs are open. I have been to the Genius bar 3 times this week.
They keep looking at it, doing disk checks, repairing permissions, then I left it with them for 3 days. They ran "diagnostic tests", but still came back with nothing.
They finally agreed to wipe my Hard Drive. Since I got it back Friday night, I had one more kernel panic, and I've managed to update Mountain Lion...but the Crash Report thing is still going on.
It's pretty obvious that the Genius bar here in London doesn't have a clue how to fix this, so what should I do?Here's the one from last night.
Interval Since Last Panic Report: 908 sec
Panics Since Last Report: 1
Anonymous UUID: BE47B0D8-E4D1-B2D2-B22B-F4EEB7B82C44
Sat Feb 9 22:18:42 2013
panic(cpu 0 caller 0xffffff80082b7bd5): Kernel trap at 0xffffff8008636e02, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000250, CR3: 0x0000000000c78021, CR4: 0x00000000000606e0
RAX: 0x0000000000000000, RBX: 0xffffff80d9beb000, RCX: 0x0000000000000000, RDX: 0xffffff8019736880
RSP: 0xffffff80f887bd70, RBP: 0xffffff80f887bd80, RSI: 0xffffff80088e1490, RDI: 0x0000000000000200
R8: 0x0000000000000000, R9: 0x0000000000000155, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff801d22bc30, R13: 0xffffff801d22bc30, R14: 0xffffff80d9beb000, R15: 0xffffff802d7e8990
RFL: 0x0000000000010206, RIP: 0xffffff8008636e02, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000250, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f887ba10 : 0xffffff800821d626
0xffffff80f887ba80 : 0xffffff80082b7bd5
0xffffff80f887bc50 : 0xffffff80082ce4ed
0xffffff80f887bc70 : 0xffffff8008636e02
0xffffff80f887bd80 : 0xffffff800862c671
0xffffff80f887bda0 : 0xffffff8008293075
0xffffff80f887bde0 : 0xffffff8008220b0c
0xffffff80f887be10 : 0xffffff8008210448
0xffffff80f887be60 : 0xffffff8008220df2
0xffffff80f887be90 : 0xffffff800824f021
0xffffff80f887bed0 : 0xffffff8008216d00
0xffffff80f887bf20 : 0xffffff8008219f64
0xffffff80f887bf50 : 0xffffff8008218c97
0xffffff80f887bf70 : 0xffffff80082a5b16
0xffffff80f887bfb0 : 0xffffff80082ced53
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000008000000
Kernel text base: 0xffffff8008200000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 2231670437867
last loaded kext at 1251112887675: com.apple.filesystems.afpfs 10.0 (addr 0xffffff7f89e1f000, size 348160)
last unloaded kext at 573356712709: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f88b39000, size 65536)
loaded kexts:
com.apple.filesystems.afpfs 10.0
com.apple.nke.asp_tcp 7.0.0
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleLPC 1.6.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9A302, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3 -
Airport causing kernel panics and kp in safe boot.
Last week I got my first kernel panic in years. It happened while I was asleep and checking an extrenal drive for bad blocks with TechTool. It turns out that the drive indeed had bad blocks and found that the cpu was shut down when I awoke. I started up the computer and it wasn't able to stay on for more than 10 min max before the next kernel panic. I checked here for more advice on kernel panics and started to try to narrow the number of culprits. Everything was unplugged and still kp. Instaled a new drive with a week older system from Time Machine and still kp. Reset NVRAM and replaced pyhsical RAM and still kp. Removed the Airport Extreme card and still kp. Booted into Safe Mode after all of the previously mentioned and still kp. I'm now going to take the drive and swap it into another body that I have to see if the root is actually on the drive on the physical hardware of the cpu.
I was interested in this thread and read all of the links that jpl posted. Airport causing Kernel Panic (?) Jason then replied that it had been solved due to a "permissions problem" I wish he gave more info on what exactly he did to resolve the problem as it's been almost a week now without any work being done for me.
I've also noticed this very strange behavior that might shed some light onto the issue. When I open System Prefs and close the window there is a strange colored pattern that will always flash after the window has been closed. I tried to post it to my me page but for somereason it wouldn't play for me so there's that and the YouTube version too.
https://www.me.com/gallery/#100008/Prefs%20Screen
http://www.youtube.com/watch?v=2zrTt88YdBo
In addition when the computer has started up and the system loads. Checking Activity Monitor shows that there are 50 or more threads active for the the kernel_task. Inspecting this doesn't seem to show any useful information.
Finally here are a few of the recent crashes I hope that someone might be able to shed some light on this extremely frustrating problem for me.
Tue Oct 25 18:54:16 2011
panic(cpu 0 caller 0x000AE584): "Uncorrectable machine check: pc = 00000000000A388C, msr = 0000000000141000, dsisr = 42000000, dar = 0000000000272008\n" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000\n" " L2FIR = 0000000000000000, BusFir = 0000000080000000\n"@/SourceCache/xnu/xnu-1228/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AE584 0x000AE804 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2fc12c80)
PC=0x000A388C; MSR=0x00141000; DAR=0x00272008; DSISR=0x42000000; LR=0x000A37C8; R1=0x2E947B40; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00000000 0x000A09C8 0x0009E2EC 0x0006B3C0 0x0006C728 0x0003BE1C
0x0029361C 0x0029364C 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x249dba00)
PC=0x9195435C; MSR=0x0000F030; DAR=0x00272000; DSISR=0x42000000; LR=0x00001FA8; R1=0xBFFFFB00; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: PubSubAgent
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Tue Oct 25 19:09:54 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 15:31:02 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 22:17:42 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000010 PC=0x0000000000082EF8
Latest crash info for cpu 0:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thu Oct 27 11:28:35 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x00000000000848E0
Latest crash info for cpu 0:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thanks in advance,
MaxMy vision is pretty poor, still cant see it, but...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
Kernel Panic and monitor light flashes short-short-long-related?
Greetings, all. It appeared my computer was free of its long-running kernel panics, and then the KPs returned. Before the KPs became an issue, the monitor started the short-short-long error warning on the power light. Is it >possible< that the monitor error can cause a KP? I ignored the monitor issue (the top half of the screen has faded slightly but didn't compel me to get a new one), and I do not have a spare monitor to connect to do a test.
Thanks for your help.
VinceIt's hard for us to say. Best would be to run the Apple Hardware Test disk that shipped with your Mac, and see if it flags any hardware; monitor for example.
Cheers!
DALE -
Kernel panic and possible bad hard drive? HELP!!!
I've been running my G4 iMac without any trouble for just shy of 4 years now. On Monday night I clicked on a menu on the Netflix web page and the computer crashed. I later figured out this was a full on kernel panic.
I happened to have Tuesday off so I spent my time backing up as much of my files as I could. While backing up the computer would occasionally have another kernel panic and freeze. Sometimes the screen would look like this (http://www.tallgrassrestoration.com/kernelpanic2.jpg), sometimes it would look like this (http://www.tallgrassrestoration.com/kernelpanic1.jpg). Eventually it just stopped starting up, as of now it just gives me a folding icon with a flashing question mark on it. I got all the files I really need burned onto DVDs, but there are still many files I would rather not lose.
I can boot it up from the OS 10.3 install disk, but the installer software does not recognize the hard drive, i.e. it does not list it as a location to install the operating system. The Disk tools does recognize the hard disk but comes up with a nasty error when I try to 'repair' the volume and will not proceed. The erase option looks like it would work, but I'd rather not go there... yet.
So I believe I have a hard disk issue. Because I don't hear any associated noises I am hoping its not hardware related, but rather a corruption in the sector where the system software is store.
Does anyone have any advice how I can proceed? Is there any way I can just use my wife's iBook and treat the iMac like an external hard drive and remove the last of my files that way? Any way I can repair this problem without wiping out or replacing the hard drive?
thanks,A couple of years ago I accidentally bought and installed two incompatible modules. I would get Kernel Panics 3 or 4 times a day. When I removed the factory module these KP dropped to a once every day or so. I would suggest you monitor closely for a while longer until we can be sure that both modules are good.
It's possible it was the RAM seating but I'd be more suspicious than that; you could always try re-installing it.
Most RAM comes with a lifetime warranty so even if it was some time ago it's worth contacting the reseller.
I use a magnetic screwdriver with torx bits too, but did keep it away from all the chips and boards.
Let us know how you get on.
cheers
mrtotes -
Installing Mavericks cause Kernel Panic and after installing too
Hi,
I worked with Mountain Lion and all was good, but I thought that would be nice to update to Mavericks.
And I'm not good in Mac OS, so I didn't prepare backup before, because believed that it have to work.
But during installation I got kernel panic several times, yeah. But installation process was continued and finally Mavericks was installed.
I was happy, but I shouldn't.
From time to time I'm getting kernel panic and I don't know what is reason.
The worst things that I can't rollback to ML, because for some reason Mavericks installing instead.
And I did clean install several times, and did cleaning NVRAM and PRAM, but it all didn't help to me.
I haven't Apple Support in my country, so I can't even come to service center.
And my last hope is your support.
Could you please look on a kernel panic log and say me what is wrong with it?
Anonymous UUID:
CB0D1011-3613-05A6-5015-9ABF6A5C5764
Sun Dec 8 22:57:24 2013
panic(cpu 1 caller 0xffffff80074dc19e): Kernel trap at 0xffffff7f8934696c, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef7f8936c9b8, CR3: 0x000000000a169000, CR4: 0x0000000000000660
RAX: 0x0fffffc5f76d0000, RBX: 0xffffef7f8936c9b0, RCX: 0x0000000000000001, RDX: 0x000003a0892cfa12
RSP: 0xffffff80efc03d80, RBP: 0xffffff80efc03e70, RSI: 0x000003c0892c668c, RDI: 0xffffff80e8eed148
R8: 0x00000000e0000000, R9: 0x0000000000000005, R10: 0x00000000ffffffff, R11: 0xffffffffffffffff
R12: 0xffffff801937f800, R13: 0x0000000000000005, R14: 0xffffff80e8eed148, R15: 0xffffff7f8936ae20
RFL: 0x0000000000010006, RIP: 0xffffff7f8934696c, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef7f8936c9b8, Error code: 0x0000000000000002, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80efc03a10 : 0xffffff8007422f69
0xffffff80efc03a90 : 0xffffff80074dc19e
0xffffff80efc03c60 : 0xffffff80074f3606
0xffffff80efc03c80 : 0xffffff7f8934696c
0xffffff80efc03e70 : 0xffffff7f89345b89
0xffffff80efc03f30 : 0xffffff80074dda5c
0xffffff80efc03f50 : 0xffffff800743757a
0xffffff80efc03f90 : 0xffffff80074378c8
0xffffff80efc03fb0 : 0xffffff80074d6aa7
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10E D6F331236]@0xffffff7f89343000->0xffffff7f8936dfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x0000000007200000
Kernel text base: 0xffffff8007400000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 6087597184120
last loaded kext at 734223625091: com.apple.filesystems.smbfs
2.0.0 (addr 0xffffff7f89736000, size 335872)
last unloaded kext at 317416816502: com.apple.filesystems.msdosfs
1.9 (addr 0xffffff7f89736000, size 57344)
loaded kexts:
com.apple.filesystems.smbfs
2.0.0
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.iokit.IOBluetoothSerialManager
4.2.0f6
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AGPM
100.14.11
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.5.2fc2
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleMikeyDriver
2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.GeForceTesla
8.1.8
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleIRController
325.7
com.apple.driver.AppleUSBCardReader
3.3.5
com.apple.iokit.SCSITaskUserClient
3.6.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.0
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AppleUSBHub
650.4.4
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBOHCI
650.4.1
com.apple.driver.AppleUSBEHCI
650.4.1
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.AppleGraphicsDeviceControl
3.4.12
com.apple.driver.DspFuncLib
2.5.2fc2
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91
com.apple.iokit.IOBluetoothFamily
4.2.0f6
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.5.1d27
com.apple.nvidia.classic.NVDANV50HalTesla
8.1.8
com.apple.nvidia.classic.NVDAResmanTesla
8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.iokit.IOFireWireIP
2.2.5
com.apple.driver.AppleHDAController
2.5.2fc2
com.apple.iokit.IOHDAFamily
2.5.2fc2
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IONDRVSupport
2.3.6
com.apple.iokit.IOGraphicsFamily
2.3.6
com.apple.driver.AppleSMC
3.1.6d1
com.apple.driver.AppleUSBMultitouch
240.6
com.apple.iokit.IOUSBHIDDriver
650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.0
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.0
com.apple.iokit.IO80211Family
600.34
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
650.4.4
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
650.4.4
com.apple.driver.NVSMU
2.2.9
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
21
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:Oksan wrote:
Sun Dec 8 22:57:24 2013
panic(cpu 1 caller 0xffffff80074dc19e): Kernel trap at 0xffffff7f8934696c, type 14=page fault, registers:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
1333 MHz is the wrong memory.
Your Mid 2009 MacBook Pro 5,5 uses PC3-8500 1066 MHz Memory....?
see > MacBook Pro (13-inch, Mid 2009) - Technical Specifications
and > MacBook Pro: How to remove or install memory
or > How to Upgrade MacBook Pro RAM (2009, 2010, 2011, 2012) -
I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can giveUnless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40. -
Software Update and Disk Utility no longer work (Leopard)
Hello. After upgrading yesterday from 10.4.11 to 10.5.0 then updating to 10.5.1 I find that repair / verify permissions no longer works (it just hangs after starting).
And the same with Software Update, it starts the check then just hangs. Grateful for any ideas!
Overall I am finding Leopard much slower in operation than Tiger. PeterCreate a new admin account with Apple menu -> System Preferences -> Accounts and see if the issue duplicates itself logging into that account. That will say if the issue systemwide, or just localized to the a bad user cache file. If the issue persists in the new user, you can try looking in the System -> Library and Library -> Cache, Applications Support, and ByHost folders for cache files relating to Software Update and Disk Utility. Once you find them, carefully extract them to comparable folders on your desktop you create (i.e. name one systemlibrarycache) so you know where you go them from, and restart your Mac. If the issues go away after two restarts then it is just one set of bad cache files. If the issues return after two restarts, you have something generating bad cache files which needs a more system wide repair tool.
Maybe you are looking for
-
Listing the Human tasks through Workflow API
The workflow API uses oc4jadmin as the user to get the workflow context. what if we dont have the credentials of oc4jadmin but of a normal user to whom a task is assigned. I am not able get the workflow context by using the credentials of a simple us
-
Select Long Raw data type is so slow?
Hi I have a table having Long Raw data type field.It's store more than 2mb per record.But,I need to select others fields in this table without selecting Long Raw field. anyway,it's so slow for me. Any advise to me? thx a lot. :)
-
Restore previous version excel file
I safed a excel file with the same name of an already existing file. Can I, and if so how, retrieve this original file?
-
I don't know if it's the new ios7 or not, but I've noticed that the autofocus is not working well on the camera now. I've tested it, captured video and pics showing the problems and went to the apple store. Great help there, they said to post up a
-
Default Relationships in Org Management
Hello All... I am having a big issue with the defaults of Org Management relationships. For some reason, our installation does NOT allow me to automatically create positions dependent on other positions...like 'is supervised by' relationship between