Kernel panic at startup following updated to 10.6.8

Following update via software update to 10.6.8, I had a kernel panic at start-up. I was able to start up in "safe" mode. I repaired permissions (numerous), verified the HD (appeared OK). Rebooted in normal mode, and got kernel panic at start up. Again booted into safe mode. Looked at the panic log and decided to get rid of two applications that I suspected might be problematic (soundflower and VaraAudio software). Rebooted in normal mode and again had a kernel panic at start up. Here is the text of the panic. If anyone can shed some light that would be great. If not, I can erase and restore via time capsule but I would rather not go to that trouble.    Thanks in advance.
Interval Since Last Panic Report: 7394 sec
Panics Since Last Report:          7
Anonymous UUID:                    C688F3AD-FEEA-4DBC-8820-7D67ED942A48
Sun Jun 26 01:25:37 2011
panic(cpu 2 caller 0x2abf6a): Kernel trap at 0x7a57c233, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x0c03b100, ECX: 0x01500000, EDX: 0x00000001
CR2: 0x00000000, EBP: 0x829e3df8, ESI: 0x00000001, EDI: 0x0c03b100
EFL: 0x00010282, EIP: 0x7a57c233, CS: 0x00000008, DS: 0x0d3b0010
Error code: 0x00000000
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x829e3c08 : 0x21b837 (0x5dd7fc 0x829e3c3c 0x223ce1 0x0)
0x829e3c58 : 0x2abf6a (0x59e3d0 0x7a57c233 0xe 0x59e59a)
0x829e3d38 : 0x2a1a78 (0x829e3d50 0xd3b9dc0 0x829e3df8 0x7a57c233)
0x829e3d48 : 0x7a57c233 (0xe 0xd3b0048 0x829e0010 0x510010)
0x829e3df8 : 0x7a57b1f5 (0xc03b100 0x7a581480 0x7a581460 0x0)
0x829e3e18 : 0x543f60 (0xc03b100 0xbef4f00 0x1 0x506b76)
0x829e3e78 : 0x542137 (0xbef4f00 0xc03b100 0xd3c0cc0 0xd3a59e0)
0x829e3f28 : 0x5426e9 (0xbef4f00 0xd2f9e80 0x0 0x516766)
0x829e3f78 : 0x5443d5 (0xbef4f00 0x8 0x829e3fac 0x1)
0x829e3fc8 : 0x2a179c (0xda587e0 0x0 0x2a17ab 0xd20fb7c)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.iokit.CHUDProf(3)@0x7a57a000->0x7a584fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,1 (Mac-F22589C8)
System uptime in nanoseconds: 27192953361
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AudioAUUC    1.57
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleIntelYonahProfile    14
com.apple.driver.AppleMikeyHIDDriver    1.2.0
com.apple.driver.AppleIntelPenrynProfile    17
com.apple.iokit.CHUDProf    3
com.apple.driver.AppleUpstreamUserClient    3.5.7
com.apple.driver.AppleMikeyDriver    2.0.5f13
com.apple.driver.AppleIntelHDGraphics    6.3.6
com.apple.driver.AppleIntelNehalemProfile    11
com.apple.driver.AudioIPCDriver    1.1.6
com.apple.driver.AppleHDA    2.0.5f13
com.apple.driver.AppleMCCSControl    1.0.20
com.apple.driver.AppleIntelHDGraphicsFB    6.3.6
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet    3.0.5b8
com.apple.driver.AppleIntelMeromProfile    19
com.apple.driver.AppleGraphicsControl    2.10.6
com.apple.GeForce    6.3.6
com.apple.driver.AirPortBrcm43224    428.42.4
com.apple.driver.AppleLPC    1.5.1
com.apple.driver.AppleBacklight    170.0.46
com.apple.kext.AppleSMCLMU    1.5.2d10
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleUSBTCButtons    201.6
com.apple.driver.AppleIRController    303.8
com.apple.driver.AppleUSBTCKeyEventDriver    201.6
com.apple.driver.AppleUSBTCKeyboard    201.6
com.apple.iokit.SCSITaskUserClient    2.6.8
com.apple.BootCache    31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.iokit.IOAHCIBlockStorage    1.6.4
com.apple.driver.AppleUSBHub    4.2.4
com.apple.driver.AppleFWOHCI    4.7.3
com.apple.driver.AppleEFINVRAM    1.4.0
com.apple.driver.AppleSmartBatteryManager    160.0.0
com.apple.driver.AppleUSBEHCI    4.2.4
com.apple.driver.AppleAHCIPort    2.1.7
com.apple.driver.AppleUSBUHCI    4.2.0
com.apple.driver.AppleACPIButtons    1.3.6
com.apple.driver.AppleRTC    1.3.1
com.apple.driver.AppleHPET    1.5
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC    1.4
com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
com.apple.security.sandbox    1
com.apple.security.quarantine    0
com.apple.nke.applicationfirewall    2.1.12
com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
com.apple.driver.AppleProfileReadCounterAction    17 - last loaded 26717749780
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction    14
com.apple.driver.AppleProfileRegisterStateAction    10
com.apple.driver.AppleProfileKEventAction    10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface    74.2
com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
com.apple.iokit.IOSerialFamily    10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver    2.0.5f13
com.apple.driver.DspFuncLib    2.0.5f13
com.apple.iokit.IOAudioFamily    1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOFireWireIP    2.0.3
com.apple.iokit.AppleProfileFamily    41
com.apple.driver.AppleHDAController    2.0.5f13
com.apple.iokit.IOHDAFamily    2.0.5f13
com.apple.iokit.IO80211Family    320.1
com.apple.iokit.IONetworkingFamily    1.10
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleBacklightExpert    1.0.1
com.apple.nvidia.nv50hal    6.3.6
com.apple.NVDAResman    6.3.6
com.apple.iokit.IONDRVSupport    2.2
com.apple.iokit.IOGraphicsFamily    2.2
com.apple.driver.AppleSMC    3.1.0d5
com.apple.driver.IOPlatformPluginFamily    4.7.0a1
com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
com.apple.iokit.IOBluetoothFamily    2.4.5f3
com.apple.driver.AppleUSBMultitouch    207.7
com.apple.iokit.IOUSBHIDDriver    4.2.0
com.apple.driver.AppleUSBMergeNub    4.2.4
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    2.6.8
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.6.1
com.apple.driver.XsanFilter    402.1
com.apple.driver.AppleFileSystemDriver    2.0
com.apple.iokit.IOAHCISerialATAPI    1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
com.apple.iokit.IOUSBUserClient    4.2.4
com.apple.iokit.IOFireWireFamily    4.2.6
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily    4.2.4
com.apple.driver.AppleEFIRuntime    1.4.0
com.apple.iokit.IOHIDFamily    1.6.6
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.TMSafetyNet    6
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    289.1
com.apple.iokit.IOStorageFamily    1.6.3
com.apple.driver.AppleACPIPlatform    1.3.6
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3

Update - I could not resolve the conflict - ran extended hardware test, disc repair, both showed no errors. Removed startup items that were third party. Decided to erase/re-install. I am now on 10.6.8 with no problems, and will be adding back my stuff one app at a time. Hope all goes smoothly from here.

Similar Messages

Kernel panic on startup

Kernel panic occurred on startup last week. Since then have tried the following-
Removed all periferals apart from Apple keyboard and mouse.
Tried each of the 512Mb ram chips on their own.
Booted from and ran successfully-
DiskWarrior - clear
System Disc, Disc Utilities - clear
Tech Tool Pro - clear
Apple Hardware test - clear
Ran Memtest on ram, came out OK
Wrote zeros to hard disc then installed a new OSX 10.4.6. Still get kernel panic on startup.
Checked LED's on logic board while starting up from internal start button. 3 light up before kernel panic. Not sure if this test indicates good logic board, power supply or not?
Can boot OK in safe boot mode. Again should that indicate logic board and hard disc OK?
Help?

If all three of the LEDs light up, that means that power is getting to the places it should, but even if the logic board is getting power, that doesn't mean that it is functioning properly. You have performed all the tests you can (thanks for listing them) and nothing shows up. Call Apple and make an appointment to take it in and have a genius look at it, or, if you have Apple Care, call them and see what they suggest.

10.6.8 kernel panic at startup (fixed)

**excuse my english since I'm french**
Like a lot of people, I've installed 10.6.8 through software update. And I've experimented kernel panic at startup. So, I unplugged everything (my two USB hubs with multiple peripherals) except the original Apple keyboard and Apple wired mouse. And restarted in safe mode. Downloaded Apple 10.6.8 combo update, install it and restart. Everything went fine. Great.
But as soon as I plugged back my USB hub, kaboom! here's come the Kernel Panic again.
So, one by one, I plug and unplug my peripherals. To discover that my old optical wired two button mouse (love that mouse ;-))) was THE problem. Even when it's plugged directly in one of the USB port on my Mac Pro. I've try with three different optical USB wired mouse, one Logitech, one Dell and one Verbatim (my old mouse): kaboom! Kernel Panic. With my Microsoft optical wireless mouse? No kernel panic. 10.6.8 crashes only with third partys wired mouses, except the Mac wired mouse.
Voilà.
So, I'm stuck with the old wired Apple Mouse (that I hate). But no more kernel panic.
Hope my story can help someone.
And Apple, I missed my optical two buttons wired mouse. ;-))

I have the same problem, but only on one of the two iMacs that I updated to 10.6.8.
The first installation went smoothly, and I haven't had any trouble with the mouse or anything else on that iMac. A Samsung color laser printed continues to work just fine.
The second installation seemed to have a hiccup -- after I had authorized the update there was a second update screen. That sequence finished with a kernel panic, which continued through several attempts until I unplugged the Logitech laser mouse.
That Logitech mouse works perfectly on the first updated iMac, and the other Logitech mouse from that computer causes a kernel panic on the troublesome iMac.
I'm now using an Apple bluetooth mouse, which I'm getting used to - but I would still prefer the option of my good old Logitech mouse.
Another problem is that I can't print to a networked Konica-Minolta bizhub C451. Tried the combo 10.6.8 updater and reinstalled the Konica driver -- but still no dice.

Can't get past kernel panics on startup

Like the title says, I'm unable to get past kernel panics on startup. I know next to nothing about the technical side of computers, so I'll just explain the whole process of what I've gone through. Earlier today I got a kernel panic after waking my computer from sleep. I restarted and everything was fine. I probably should have looked in to the cause of the panic, but I just went on using the computer as normal. Later, I returned to the computer, woke it from sleep, and got another kernel panic. I restarted, and my computer got to the Apple logo and gray spinning wheel when it froze. No kernel panic, just a frozen wheel. So I shut it down, restarted it again, and this time I got to just a gray screen (I don't remember if the Apple logo had shown up or not, but there was no spinning wheel). It hung on that screen for a while, then the fans started running like they were trying to take off a jet engine, so I shut it down. I tried restarting it once more, and it got to the spinning wheel screen when another kernel panic happened. I restarted the computer, and tried this a few more times, getting kernel panics each time. So I let it rest. A few minutes later I tried it again. This time it got even further, and I was pretty hopeful that I'd at least get the computer running again. It got past the gray spinning wheel, to the blue screen that usually shows up before the "cosmic wallpaper" and login screen. At that point it hung on that blue screen, and the jet engine sound started up. Now I take out my 10.5 instal disc. I back up with Time Machine, so I'm just going to hope reinstalling and restoring from Time Machine works out. I stick in my 10.5 disc, hold down the 'c' key and start up the iMac. Eventually it gets to the spinning wheel screen and a kernel panic. That's where I am now. Any help? I have a big paper due on Tuesday, so there's a ticking clock.
Thanks a lot
Mike

Hi - I have a similar problem here, running snow leopard 10.6. I am also not technical.
I went out & left my mac on, and when I got home it had switched itself off and on restart I got to the grey screen + Apple icon. Unfortunately I have never backed up my data!! Tried starting in safe mode (holding Shift key) and get the following message every time I try this:
panic (cpu 0 caller 0x560d25): "Unable to find driver for this platform: \"APCI\".n" e/SourceCache/xnu/xnu_1504.9.37/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called:<panic>
Backtrace (CPU0),Frame : Return Address (4 potential args on stack)
BDS process name corresponding to current thread: Unknown
Mac OS version: Not yet set
Kernel Version: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root: xnu-1504.9.37~1/RELEASE_I386
I have tried booting from the Leopard disc but can't do a repair as it doesn't seem that it can find the Mac hard disc. Have also tried starting holding the <option> key and get a Hardisc icon displayed with an arrow beneath, and when clicked a progress bar appears for maybe 30 seconds, then disappears & it just carries on in grey screen mode with spinning wheet & Apple icon.
I want to know if I just have to concede that I have lost my data and need to reinstall the OS, or it could be worth taking to a Mac repair agent to try to retrieve it

Constant Kernel Panics on startup on 10.4.7

I had no problems after upgrading to 10.4.7 on my Titanium iBook so I upgraded on my G4 iMac desktop as well.
I had one successful restart under 10.4.7, but on all subsequent attempts, I've gotten kernel panics on startup. with a screen and a half of backtrade and exception state lines, filled with hexadecimal codes.?
Anyone else had this problem? Any suggestions as for how best to deal with it?
P.S. I did make a bootable backup of my disk before upgrading, and my first thought is that I should just restore back to 10.4.6 from the backup. The problem, however, is that the backup is on a firewire drive, and I can't figure out how to make the machine boot from the backup. Is there a simple 'button' trick I can use to make it boot from the firewire drive instead of from the internal HD? (Alternately, is there a way I can get my machine to recognize the Firewire drive from system 9.2.2. I have been able to contrive a way to reboot from the internal drive's 9.2.2. folder... but I can't see the firewire drives from it).

OK: Here's a follow-up:
I tried using the Startup Manager and, to my surprise, that didn't seem to help. It still wasn't recognizing my firewire drive backups as volumes.
I then went to Dr. Smoke's diagnostic list and looked through it. The first step that seemed both relevant and possible to my situation was the suggestion (through a link to a help page) that I reset my PRAM and DVRAM.
So, I went ahead and tried rebooting (in OS X) while holding down option-command-p-r, and the machine booted fine. No kernel panic at all.
I decided to try immediately rebooting into OS-X as per 'normal' (i.e. without holding down option-command-p-r). The kernel panic recurred. Several attempts at rebooting revealed the following: (1) Wiith each attempt to reboot off 10.4.7 on the hard drive while holding down option-command-p-r, I had no problems. (2) With each attempt to reboot from 10.4.7 on the hard drive without holding down option-command-p-r, I got a kernel panic. Hmm.... (That seems significant, but what exactly it means, I don't know.)
I did find out that, if I held down option-command-p-r while rebooting, I was able to boot successfully into 10.4.7 from the hard drive, and that from there, I was able to reboot into with no problem into 10.4.6 from my backup firewire drive (even if I didn't hold down option-command-p-r).
At this point, I'm planning just to restore 10.4.6 to my internal hard drive from my backup, and hope that works. (I'll post and let you know if it does.) However, if the information presented above suggests anything to anyone (e.g. about more specific problems that I should investigate, perhaps with the RAM, I'd be most appreciative to hear your thoughts.).

Early 2006 iMac Kernel Panics on startup

We have recently purchased a second hand 20" iMac, and after a few days it has started to kernel panic on startup, before the Apple logo disappears. A whirring when it begins to turn on has also appeared.
I shall photograph the kernel panic message if it helps. The local Apple Store have suggested that since there is a greater time period before the Apple Logo appears, the fault might be something to do with the motherboard/hard drive. Are there any suggestions here which may help us?
Thank you.

KimGale wrote:
The kernel panic occurs before I can log in.
here's some to read up on:
_*Resolving Kernel Panics*_ and here _*http://support.apple.com/kb/HT2546*_.
for OS X 10.6 specifically, see this: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html.
also
_*What is a kernel panic*_,
_*Technical Note TN2063: Understanding and Debugging Kernel Panics*_,
_*Mac OS X Kernel Panic FAQ*_,
and
_*Tutorial: Avoiding and eliminating Kernel panics*_
The disk is in there, and now we can't get it out
FWIW,
Kappy wrote:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
JGG

DVD drive broken, Mac G5 having kernel panics at startup

After nearly 5 years of steady, trouble free use, my G5 iMac started acting up a few days ago. I get what I think are kernel panics at startup. I am usually able to get it running after a few restarts but I am worried. My DVD drive became unreliable a month after my 1 year warranty expired. For some reason it won't start up with the install disks that came with the cpu but will bootup from my DiskWarrior DVD. I tried rebuilding the directory with DiskWarrior but I got the blue screen when it was almost finished. I've decided to do and Archive and install because I'm sure my problem stems from programs I installed recently. Is it possible to do the Archive and Install from my Intell Powerbook which is running the same version software. I've tried it several times, inserting the iMac install disk on my PB with my iMac connected in Target Disk mode, but I keep getting the message that the software can't be installed on this computer (the PB). Is there another way I can perform an A&I, I don't have enough space on my iDisk to use SuperDuper to create a disk image. I'm almost at the panic stage here since I use my computer for work and I'm afraid it won't start up at all at some point.
I've performed all the usual steps, repair permissions and used Disk Utility on my Firewire connect PB to repair the disk. One odd thing is FontExplorerX all of a sudden quit on me two days ago (which has never happened in the 4 years I've used it) and told me to download it again, which I did.
Message was edited by: e. jones

Hi e. jones, and a warm welcome to the forums!
Other way around, with the iMac's Install Disc in the PB, boot the PB into T mode, boot the iMac with the Option key held down, wait for the Install Disk in the PB to show up as a boot option on the iMac.
But I think you have more serious problems. And, first you need to move some things off the iMac to make room for an A&I, you really need an external FW Drive right away.

TS3742 Kernel Panic when I am updating the software

I am having the Kernel Panic when I am updating the software I tried 3 times every time the Kernel Panic thing appears, how can I resolve that?

Start with posting the latest KP report. Then, cite the update.

Kernel panics on startup on a MB late 2008

Hi everyone.
After reading dozens of threads about kernel panics I couldn't find any appropriate post.
So you see, I've got a unibody MacBook late 2008 and as the thread name states I'm experiencing kernel panics on startup. The weird thing is, these panics occur totally random and I can't induce them. Usually I have an apple keyboard, apple mouse and a WD 1TB drive (TimeMachine backup) connected via USB plus an external monitor and magsafe power. Even after disconnecting all that stuff I receive kernel panics.
I haven't had any kernel panic during normal operation so far. As soon as I get the system up and running nothing happens. They just keep coming every second or third startup.
There are 9 crash reports in my L/Logs/Diag.Reports. You can see the last kernel panic report here:
Tue Jan 22 16:00:04 2013
panic(cpu 0 caller 0xffffff80102b7bd5): Kernel trap at 0xffffff7f9124f578, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80f1c3e000, CR3: 0x0000000012eae000, CR4: 0x0000000000000660
RAX: 0x00000000164aae3d, RBX: 0x01ffff8022416000, RCX: 0x0000000080a4a2ab, RDX: 0x0000000000000000
RSP: 0xffffff80f7443e50, RBP: 0xffffff80f7443e60, RSI: 0x0000000000000002, RDI: 0xffffff8010801ef0
R8: 0x0000000000000001, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8022416000, R13: 0xffffff8022038100, R14: 0xffffff80223d6100, R15: 0x0000000000000001
RFL: 0x0000000000010246, RIP: 0xffffff7f9124f578, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff80f1c3e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f7443af0 : 0xffffff801021d626
0xffffff80f7443b60 : 0xffffff80102b7bd5
0xffffff80f7443d30 : 0xffffff80102ce4ed
0xffffff80f7443d50 : 0xffffff7f9124f578
0xffffff80f7443e60 : 0xffffff801063181b
0xffffff80f7443ea0 : 0xffffff801063133e
0xffffff80f7443f30 : 0xffffff801062d2d0
0xffffff80f7443f70 : 0xffffff8010631e99
0xffffff80f7443fb0 : 0xffffff80102b26b7
      Kernel Extensions in backtrace:
         com.apple.driver.AppleUSBOHCI(5.2.5)[1C94C4BC-B05C-36D4-B1A2-B0BE04A5C620]@0xff ffff7f9124e000->0xffffff7f91260fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910f8000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f908af000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000010000000
Kernel text base: 0xffffff8010200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 1060195299
last loaded kext at 357954763: com.apple.driver.XsanFilter    404 (addr 0xffffff7f91ea4000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AirPort.Brcm4331    602.15.22
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.nvenet    2.0.19
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleUSBOHCI    5.2.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0

I'm not an expert at reading panic logs but nothing you posted jumps out at me. Since you still get the panics with everything disconnected I would try repairing your hard drive with Disk Utility and reinstalling Mountian Lion.

MacBook 2.1 Kernel Panic on startup

Hi, Guys! I have a macbook that sometimes goes in Kernel panic at startup
I need to power of the the mac pressing the power button for some seconds, after this it boot normally...
this is the log of kernel panic:
Interval Since Last Panic Report: 11836 sec
Panics Since Last Report:          4
Anonymous UUID:                    4F66CF62-080B-44E4-906F-5CDFA05FB6CA
Thu Jan 31 13:37:42 2013
panic(cpu 1 caller 0x2aaeab): Double fault thread:0x4ca3000, trapno:0x8, err:
0x0, registers:
CR0: 0x8001003b, CR2: 0x04b08da8, CR3: 0x008d6000, CR4: 0x00000660
RAX: 0x00007fff8ab11190, RBX: 0x00007fff8ab11190, RCX: 0x00007fff8ab11191,
RDX: 0x0000001000000000
RSP: 0xffffff9004b08db8, RBP: 0x00007fff5fbfd940, RSI: 0x000000110002e3ed,
RDI: 0x000000110002e3ed
R8: 0x000000110002e3ed, R9: 0x00007fff5fbfdab8, R10: 0x00007fff5fc404a0,
R11: 0x00007fff8ab261e0
R12: 0x00007fff5fc43dc8, R13: 0x00007fff5fc43be8, R14: 0x00007fff5fbfdab8,
R15: 0x00007fff5fbfdab8
RFL: 0x0000000000010093, RIP: 0xffffff80002c0c20, CR2: 0xffffff9004b08da8
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x2fbaef78 : 0x21b837 (0x5dd7fc 0x2fbaefac 0x223ce1 0x0)
0x2fbaefc8 : 0x2aaeab (0x59de64 0x59e0df 0x4ca3000 0x8)
0x2fbaf0b8 : 0x2a29d2 (0x0 0xf 0x2e3ed 0x11)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x5fbfd940
BSD process name corresponding to current thread: launchd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3
~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
System uptime in nanoseconds: 13280777169
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver       1.0.2d2 - last loaded 13191053663
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleUpstreamUserClient        3.5.7
com.apple.driver.AppleMCCSControl       1.0.20
com.apple.driver.SMCMotionSensor        3.0.1d2
com.apple.driver.AudioAUUC      1.57
com.apple.driver.AppleLPC       1.5.1
com.apple.Dont_Steal_Mac_OS_X   7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros        411.19.4
com.apple.driver.AirPort.Atheros21      425.14.7
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile        17
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin        4.7.0a1
com.apple.driver.AppleGraphicsControl   2.10.6
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleIntelGMA950       6.3.6
com.apple.driver.AppleIntelIntegratedFramebuffer        6.3.6
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.driver.AppleIRController      303.8
com.apple.driver.AppleUSBTrackpad       201.6
com.apple.driver.AppleUSBTCKeyEventDriver       201.6
com.apple.driver.AppleUSBTCKeyboard     201.6
com.apple.driver.USBCameraFirmwareLoader        1.1.0
com.apple.iokit.SCSITaskUserClient      2.6.8
com.apple.BootCache     31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub    4.2.4
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleFWOHCI    4.7.3
com.apple.iokit.AppleYukon2     3.2.1b1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA      2.5.1
com.apple.driver.AppleUSBEHCI   4.2.4
com.apple.driver.AppleSmartBatteryManager       160.0.0
com.apple.driver.AppleUSBUHCI   4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC       1.3.1
com.apple.driver.AppleACPIButtons       1.3.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient     142.6.0
com.apple.security.sandbox      1
com.apple.security.quarantine   0
com.apple.nke.applicationfirewall       2.1.14
com.apple.driver.AppleIntelCPUPowerManagement   142.6.0
com.apple.driver.AppleHDAHardwareConfigDriver   2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOFireWireIP    2.0.3
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction   14
com.apple.driver.AppleProfileRegisterStateAction        10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.driver.AppleHDAController     2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IOSurface       74.2
com.apple.iokit.IOBluetoothSerialManager        2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily   1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.iokit.IO80211Family   320.1
com.apple.iokit.AppleProfileFamily      41
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert   1.0.1
com.apple.iokit.IONDRVSupport   2.2.1
com.apple.iokit.IOGraphicsFamily        2.2.1
com.apple.driver.CSRUSBBluetoothHCIController   2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily       2.4.5f3
com.apple.driver.AppleUSBMergeNub       4.2.4
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBComposite      3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily       1.6
com.apple.iokit.IODVDStorageFamily      1.6
com.apple.iokit.IOCDStorageFamily       1.6.1
com.apple.driver.XsanFilter     402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport        2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily   2.6.8
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily        4.2.6
com.apple.iokit.IONetworkingFamily      1.10
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOATAFamily     2.5.1
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime        1.4.0
com.apple.iokit.IOHIDFamily     1.6.6
com.apple.iokit.IOSMBusFamily   1.1
com.apple.kext.AppleMatch       1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages     289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform      1.3.6
com.apple.iokit.IOPCIFamily     2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2
GHz, 2 GB, SMC 1.13f3
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: AirPort Extreme, Atheros 5416: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HCC543225A7A380, 232,89 GB
Parallel ATA Device: MATSHITADVD-R   UJ-857D
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b,
0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205,
0x7d100000 / 2

So I just ran Apple Hardware Test and first two attempts get code:
4SNS/1/40000000: TB0T
Anybody? Logic Board?
And on a third attempt:
4VDC/1/40000003: VideoController

Recurring Kernel Panic on startup, pls advise

Can I get some advice on how to diagnose a persistent kernel panic on startup?
About this Mac
Version 10.4.11
Processor: 1.67GHz PowerPC G4
Memory: 1.5GB DDR SDRAM
(PowerBookG4)
panic(cpu 0 caller 0x002E1EC4): Unable to find driver for this platform: "PowerBook 5.7".
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0X00095A10 0X00026898 0X002E1EC4 0X002C12A0 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernel version
Darwin Kernel Version 8.11.0: Wed Oct 18 10:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
No debugger configured - dumping debug iformation
MSR = 00001030
Latest stack backtrace for cp 0:
Backtrace:
0x000954F8 0X00095BF8 0X002E1EC4 0X002C12A0 0X002C1068 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernal version:
Darwin kernel version 8.11.0: Wed Oct 10 15:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic: we are hanging here...
-The PowerBookG4 starts up when selecting the local hard disk via Startup Manager (press and hold Option key); PowerBookG4 starts up when inserting the install disk 1 and selecting the local hard disk via Startup Manager (press and hold C key); PowerBookG4 starts into safe mode (press and hold Option+Shift keys).
I have verified and repaired disk permissions and the disk itself. This behavior occurs consistently with or without external devices connected.
I can work in my applications ok and everything appears to function as expected once I get the PowerBookG4 booted, but I am concerned about how long it may continue to function - got a lot to do!
Advice? very appreciated thank you! -ben
Message was edited by: Bendervish
Message was edited by: Bendervish

Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html
Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. Since you've disconnected external devices, USB & Firewire don't appear to be a problem. Are you using an external mouse?
Have you added RAM recently? To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
Look at 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

I'm getting a kernel panic on startup after restore hd

Long story made short...installed Google Music to use with my new phone...next day Mac running slow, left it running while I was out, came home to frozen screen...booted in safe mode and clicked off everything that was running in background. Tried to reboot and it kept shutting down when reaching grey screen. (I orginally had leopard and upgraded to snow leopard) got my OSX (leopard) install cd and booted to disc, disk utilities and check disc...originally would only let me verify, which failed, then unmounted and was able to get repair disc...unable to repair. I erased hd and then restored from my time machine backup, now when I boot I get kernel panic on startup. I'm running of external hd which I formatted and installed leopard essential software. So my question is, is my HD shot? Are there other step I can take? I can't afford to bring this in to someone. This is most of what my screen says when I boot:
Panic(cpu 1 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 8\n"@/SourceCache/xnu/xnu-1504 . 15 . 3/bsd/kern/kern_exec.c.3145
Debugger called: <painic>
Backtrace (cpu1), Frame : Return Address (4 potential args on stack)
and the a list of numbers....
any and all help would be appreciated to help me resolve this

Bump, can anyone help?

Kernel panic at startup and impossible to reinstall SL

Hi
I've recently bought the new iMac with SSD.
I've upgraded the Ram, adding 8go Crucial to the 4go existing.
The first time, I started very well, very quickly.
After that, I installed W7 on my bootcamp partition. It went very fine also.
After having installed W7, I booted on the Mac OS X partition. This was the first time I've got a kernel panic at startup.
Fine, I thought it was a mismanipulation when I installed W7. So, I wanted to reinstall SL.
I tried, 2 or 3 times, but I've always had this message while installing "The installer could not copy the necessary support files".
I managed to boot Mac OS in Safe Mode. I tried to installed SL directly from the Safe Mode, and I got another error : "Impossible to read the installation disk".
So I tried to make a UBS Stick bootable image of the SL installation disk : I cannot mount it "checksum error".
I hardly think now that the problem is coming from the RAM, but instead from the SL disk.
The installation disk is new, it was the first time I was using it.
Now, I am able again to boot from the mac os partition without having chaned anythink, but having booted once in safe mo
Guys, could you help my with that ? How can I get a new disk ? How can I be sure that the RAM is OK (W7 is working fine and SL also right now).
Thanks in advance

Sorry misunderstanding, my bad. By new I meant never used before.
It is the brand new iMac 27" SSD. So it supports up to 16GB of RAM.
I am also sure of the model of RAM I ordered.
I wanted to remove the new intalled RAM, however, I can't : it's way to hard. When I pull the tab, I just slip.
I can boot to the Install DVD (So, SL 10.6.8). I can go up to the beginning of the installation. It evens begins to copy files, and I always get the error at the same moment.
The same thing happens when I try to install SL from the Safe Mode of my existing OS. It begins to copy file until I get "unable to read the disk, bla bla".
I hope it was only a minor disk corruption, but I would like to be sure. How can I test the RAM and the Installation Disk ?
I tried to make an image of the installation disk, but when I try to mount the compressed image, I get a checksum error...
thanks again for your help

Kernel panic on startup after Software Update

My mother's iBook G4 is unable to startup due to a kernel panic that began after the last software update.
On boot, the computer goes to the kernel panic (You need to restart your computer) screen after a few seconds of the Apple logo screen. It cannot boot in Safe Mode or Single User mode (it hangs after reporting system uptime.)
It can boot into Target Disk mode.
The iBook updated its software (Java for Mac OS X 10.5 Update 6, Security Update 2009-006, HP Printer Drivers Update 1.1.1 and Safari 4.0.4) yesterday, then restarted and kernel panicked.
This happened to my girlfriend's PowerBook right after an update too, and because she didn't have her system disks, I asked my Mom to send her copy of 10.5 to me from SF to Portland. Now, the same thing has happened while I was in SF, and the system disk is in Portland (meaning I don't have an OS disk.)
Is there some way to fix this? I have full access to the disk on the iBook through a FireWire cable and target disk mode on my MacBook Pro (but disk utility can't check permissions.) Seems that I should be able to fix it somehow. Ideas?

Is there some way to fix this? I have full access to the disk on the iBook through a FireWire cable and target disk mode on my MacBook Pro (but disk utility can't check permissions.) Seems that I should be able to fix it somehow. Ideas?
Install the combo update that you can download from the Apple download site at http://www.apple.com/downloads/ . Sometimes the software update function doesn't install the updates correctly, causing just odd behaviors. The combo update has all prior updates from that OS X version included. If possible, it's good to repair permissions before and after the combo update.

Kernel Panics during startups - cannot boot anymore

First: Sorry for my bad english - i hope you still can understand...
The facts:
- MacBook 2,0Ghz - 2gb Ram.
- After 8 weeks --> random shutdowns. In OSX, in Bootcamp, in any application, even during booting OSX
- Replacement of the logic board, after suggested by AppleCare
- After that: OSX instable. Totally. Safari, DVD Player, Firefox, Adium.... any application crashed almost every 5 minutes
- Even sometimes: Kernel Panics. One time even at the login screen
--> I tried a reinstall --> Archive & Install
- DURING the installation of DVD 2 --> Kernel Panic.
- Sucessfully installed OSX in the second try
- OSX seems to run fine - I do the update to .7 trough SoftwareUpdate
- During reboot --> Kernel Panic.
- and now: during EVERY reboot (short after the apple on grey background) a Kernel Panic. I took a picture of that:
http://tinyurl.co/jon89
And now? I am sad! Crying! I don't know what to do anymore.. I'm writing now in Bootcamp-Windows - this is still running...
ANY suggestions?
sniff,
Hauldhagen

Hi, Hauldhagen. Welcome to the Discussions.
See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Kernel panic at startup following updated to 10.6.8

Similar Messages

Maybe you are looking for