Kernel Panic during Installation
Recently, Tiger (in my macbook) has been experiencing crazy problems. Programs refuse to start, quit suddenly, the OS X get kernel panics, and other issues. So I went to the this Apple message board and ask. I tried various solutions; they all work, BUT the problems would return and new ones arise. The main solution was reparing disk and its permissions. It worked at first but troubles persist. So then I decided to reinstall Tiger through archive and install. It almost finished but once it was setting up iwork, everything stopped for an hour until I manually shut the computer down. I attempted another try, same problem. So I moved onto erase and install. Everything worked out well until I came to the setup info screen. Things were going fine until BAM, kernel panic. I shut down the mac again and it loads os x. Now i'm afraid things will repeat itself. How often would one get a kernel panic during installation (in this case info setup)? I just want everything normal.
Mac mini, MacBook Mac OS X (10.4.7) 1GB, 1.25GB Ram (respectively)
How often
would one get a kernel panic during installation (in
this case info setup)?
Um...never? Kernel Panics are never something you should encounter on any sort of regular basis. Sounds like it could be a bad hardware component, most likely the RAM. Has it been upgraded since you got it?
Anyway, I'd take it to an Apple Store or get on the line with AppleCare asap.
Similar Messages
-
Kernel panic during Leopard 10.5.3/4 net-installation
Hi,
We have built universal Leopard images on net-install server. I am getting kernel panic during net-installation of 10.5.3 and 10.5.4 images on old iMac bubble G4 machines. These images's net-installation works perfect on latest machines like G5, Intel MacPro, iMac G5.
I am not getting any problem with 10.5.2 image with this old bubble machine. But this problem occurs only after 10.5.3 images. Here is a small part panic trace, (Sorry, I couldn't get full trace since there was no way to copy it)
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.2.8)@0x15223000->0x154a3fff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x13624000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0x147f000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x139e5000
com.apple.iokit.IONDRVSupport(1.5.2)@0x14f7f000->0x14f96fff
dependency: com.apple.iokit.IOPCFamily(2.4.1)@0x13624000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x139e5000
Exception state (sv=0x13675c80)
Any help will be appreciated.
Thanks,
RohitHi Rohit;
It appears your Leopard question has been posted in the OS 9 forum. You might have a better chance for an answer if you report over in the Leopard forum.
Allan -
Frequent kernel panic during boot up
Hi,
I am having frequent kernel panic during system bootup. It takes atleast 3-5 attempts for the machine to boot-up without a panic. It is not consistent. I have disabled dropbox and removed firefox and chrome which I suspected was causing the problem.
Any idea what could be causing the panic? Once the system boots up, it some times stays up for a long time before a panic happens again.
The error report is below. Let me know what other details are required to trouble shoot this issue.
System: iMac 27"
OS: Mac OSX 10.7.5
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i5
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 12 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system): 1.54f36
Regards,
Sudhir
Interval Since Last Panic Report: 56601 sec
Panics Since Last Report: 8
Anonymous UUID: DAB74942-3ED6-4A98-81A7-13D6D357149D
Tue Jun 18 17:31:54 2013
panic(cpu 3 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f817b459c, type 6=invalid opcode, registers:
CR0: 0x0000000080010033, CR2: 0x00000001059cf000, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0xffffff8160693af0
RSP: 0xffffff8160693c00, RBP: 0xffffff8160693c30, RSI: 0x0000000000000000, RDI: 0xffffff801aa0c000
R8: 0x0000000000000000, R9: 0x00000000ffffffff, R10: 0xffffff8151f2e047, R11: 0x00000000e0000000
R12: 0xffffff8019b49900, R13: 0xffffff81397ff000, R14: 0xffffff8160693c78, R15: 0xffffff801aa0c000
RFL: 0x0000000000010286, RIP: 0xffffff7f817b459c, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000001059cf000, Error code: 0x0000000000000000, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff81606938b0 : 0xffffff8000220792
0xffffff8160693930 : 0xffffff80002c4794
0xffffff8160693ae0 : 0xffffff80002da55d
0xffffff8160693b00 : 0xffffff7f817b459c
0xffffff8160693c30 : 0xffffff7f817b284a
0xffffff8160693c60 : 0xffffff7f8173a041
0xffffff8160693cb0 : 0xffffff7f8173a7c0
0xffffff8160693cf0 : 0xffffff7f8173b8ec
0xffffff8160693d10 : 0xffffff7f81745e46
0xffffff8160693d40 : 0xffffff7f8174783f
0xffffff8160693d60 : 0xffffff7f81737276
0xffffff8160693db0 : 0xffffff7f816ea785
0xffffff8160693e60 : 0xffffff800062a29d
0xffffff8160693eb0 : 0xffffff800062aace
0xffffff8160693f30 : 0xffffff800062ae49
0xffffff8160693f70 : 0xffffff8000629a2f
0xffffff8160693fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.ATIRadeonX2000(7.3.2)[9B704AFE-AF23-381E-A057-5982532504F5]@0xffffff7 f816c0000->0xffffff7f81992fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80770000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d67000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80d2e000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 21767876610
last loaded kext at 21221861556: com.apple.driver.AudioAUUC 1.59 (addr 0xffffff7f812c3000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDA 2.2.5a5
com.apple.kext.ATIFramebuffer 7.3.2
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.ATIRadeonX2000 7.3.2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.kext.ATI4800Controller 7.3.2
com.apple.kext.ATISupport 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i5, 2.66 GHz, 12 GB, SMC 1.54f36
Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1067 MHz, 0x014F, 0x4A4D313630304B534E2D3447202020202020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1067 MHz, 0x014F, 0x4A4D313630304B534E2D3447202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40U9B0, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: HP Mobile USB Optical Mouse, 0x03f0 (Hewlett Packard), 0x8607, 0xfa140000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3Thanks for the pointers and suggestions. The system was up and running with out any panics. So I decided to upgrade to Mountain Lion. I was able to download it through App Store and start the installation. Everything went through fine and finally when it had to restart, it took a long time and stopped at the grey screen showing the prohibitory sign.
After waiting for quite a long time decided to hard restart the machine. Same issue. So used the option keys at bootup and went into disk utility.
Verify disk permission threw up some errors. Then Verify Disk started throwing up errors and stopped in between and suggested to run Repair Disk.
When I ran the Repair Disk it threw up an error mid way and said:
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restor your backed-up files.
I ran Repair Disk again and it went through fine. No issues this time. Ran fix permission option as well. That also went through fine. Then restarted the system.
No use - It still shows the prohibitory sign and progress circle....just stays there....
Any advice on what next?
Thanks,
Sudhir -
Why do I get a kernel panic during large downloads?
Since I got my new MacBook Pro, it's been doing kernel panics during large file downloads.
Getting rid of Chrome seemed to help but today the panics are back. I just started up in Safe Boot mode and the downloads (two files, approx. 500 and 300 MB, respectively) completed downloading without incident.
While I'm checking out my startup items, has anyone else seen this problem? I didn't have this problem with my Core 2 Duo.I took a look at the dump and saw a reference to an Elmedia Player kext. I remembered that in another thread someone mentioned this giving some trouble, I uninstalled it. I'll keep an eye on it to see if the problem comes back.
Here's what I've got:
Tue Jun 21 19:34:42 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800048d7a1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0x0000000000000008, RCX: 0x0000000009000000, RDX: 0xffffff8003bc79e8
RSP: 0xffffff80b133b3f0, RBP: 0xffffff80b133b3f0, RSI: 0x0000000000000000, RDI: 0x0000000000000008
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000001, R11: 0x0000000000000001
R12: 0x000000000000005e, R13: 0xffffff80ab3b8662, R14: 0x0000000000000001, R15: 0xffffff80b133b4d8
RFL: 0x0000000000010286, RIP: 0xffffff800048d7a1, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80b133b090 : 0xffffff8000204d15
0xffffff80b133b190 : 0xffffff80002d1208
0xffffff80b133b2e0 : 0xffffff80002e3f4a
0xffffff80b133b2f0 : 0xffffff800048d7a1
0xffffff80b133b3f0 : 0xffffff7f8162942b
0xffffff80b133b440 : 0xffffff800032ca61
0xffffff80b133b510 : 0xffffff8000360d6f
0xffffff80b133b760 : 0xffffff8000367c04
0xffffff80b133b820 : 0xffffff8000369628
0xffffff80b133b980 : 0xffffff80003674a0
0xffffff80b133bb90 : 0xffffff800035cab9
0xffffff80b133bbf0 : 0xffffff800035e06d
0xffffff80b133bd70 : 0xffffff800035e1ce
0xffffff80b133bd90 : 0xffffff8000344370
0xffffff80b133bdc0 : 0xffffff800032fc17
0xffffff80b133be80 : 0xffffff800032bbb7
0xffffff80b133beb0 : 0xffffff800032e5fd
0xffffff80b133bf50 : 0xffffff800032e86b
0xffffff80b133bfa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.eltima.ElmediaPlayer.kext(1.0)@0xffffff7f81628000->0xffffff7f8162afff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J4139
Kernel version:
Darwin Kernel Version 10.7.4: Mon Apr 18 21:24:17 PDT 2011; root:xnu-1504.14.12~3/RELEASE_X86_64
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 195448045347
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0xffffff7f81308000, size 0x65536) - last unloaded 112596247461
loaded kexts:
com.regularrateandrhythm.driver.RowmoteIREmu 1.0 - last loaded 39974596674
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.vmware.kext.vmx86 3.1.3
com.eltima.ElmediaPlayer.kext 1.0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AudioAUUC 1.57
com.apple.kext.ATIFramebuffer 6.3.4
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelHDGraphics 6.3.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.ATIRadeonX3000 6.3.4
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.4
com.apple.driver.AppleUSBTCButtons 201.2
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.2
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.0
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPort.Brcm4331 432.11.3
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleThunderboltEDMSink 1.0.5
com.apple.driver.AppleThunderboltEDMSource 1.0.5
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.kext.ATI6000Controller 6.3.4
com.apple.kext.ATISupport 6.3.4
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.2.0
com.apple.driver.AppleThunderboltDPInAdapter 1.2.0
com.apple.driver.AppleThunderboltDPAdapterFamily 1.2.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f1
com.apple.iokit.IOBluetoothFamily 2.4.5f1
com.apple.driver.AppleUSBMultitouch 207.5
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.2
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleThunderboltNHI 1.2.3
com.apple.iokit.IOThunderboltFamily 1.3.5
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBUserClient 4.2.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.2
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.3
com.apple.iokit.IOACPIFamily 1.3.0 -
Kernel panics during TM backup
I have been having problems with kernel panics during Time Machine backups and I would like to find out if others have had similar experiences. If this is a problem unique to my configuration, then I need to do more work. If others are having the same issue, then perhaps I just need to wait until a fix is issued.
Some background, I am using TM on two computers, an early 2006 iMac and a first generation Aluminum 15" Powerbook. On the iMac, TM is now very reliable, on the PB, it will ALWAYS kernel panic at least once during a large backup, sometimes 2 or 3 times before it manages to finish the backup. Since I have been playing around with backup disk configurations, I've made several initial backups, so I've also seen quite a few kernel panics, but ONLY when TM is running a large backup.
Are you hit with kernel panics during TM backups? I see some discussion along those lines in this forum.
The most recent initial backup was with Spotlight disabled and it DIDN'T panic. This was unusual. As TM is adding files to the backup disk, Spotlight is busy indexing the new files at the same time. It is possible that the two are not playing well together on the lower performance machines, such as this 1.25 GHz G4. By adding the backup disk to Spotlight's privacy list, Spotlight is inhibited from indexing the backup disk.
- gwsFor information, this problem appears to be due to some unique problem with my particular computer.
I had been having 2 or 3 kernel panics every day. Finally, I did a Safe Boot and the panics ceased completely. Not one in the last month. Looks like it was some kind of corrupt data that the Safe Boot cleaned up.
- gws -
Kernel Panic during restart and cant boot from DVD/CD
ah.. I have a pickle here guys. PowerBook G4 15 inch 1.67 1gbDDR2 ram. I just got this sucker like 2 months or less ago. I am not getting Kernel Panic during restarts every time and cant boot from a DVD or CD. they are not burned. here is the panic.log.
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
Tue Jan 24 21:56:32 2006
panic(cpu 0 caller 0x00294084): sbflush sb->sb_so already null sb=239766c
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x00294084 0x00293678 0x002935A0 0x00292EE0 0x00159A90
0x0014F7D0 0x001504C0 0x0013B0B4 0x0013B1C8 0x0011D308 0x000A9894
Proceeding back via exception chain:
Exception state (sv=0x2D203280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
can any one help me out here, tomorrow I am going to boot it into target disk mode and install from a G5 onto the powerbooks HD doing a CLEAN install and then I am going to try booting it from a DVD and doing another CLEAN intstall just cause I dont trust a firewire install for some reason. I would like to avoid all this mess if possible. ANY HELP PLEASE, either respond or email me tend0 at mac dot com. thankshaha oh man thanks for startin slow with me, but we are passed that tested RAM, start up items, prefs, tried makin a new user account, as I stated before I can not boot from a DVD/CD.. that was one of the problems so I cant run anything that involves tageting the main HDD while its mounted. I have also repaired perms, ran fsck, tried booting up DiskWarrior(didnt boot from the CD), etc. if any one knows this perticular kernel panic string and can point out what the conflict is I can resolve it but other than that I have ran the run of the mill check to see if everything is in order procedure again and again.
-
Help!! Kernel panics after installation!!
Hi,
I am new to Arch Linux (migrating from Fedora). I am having some problems with the installation on my Sony VAIO CW (C2D, Nvidia GT230M). At first I couldn't get past the installation of X in the Beginner's guide, but after some tweaking with conf files I finally got it to work. But after reboot, kernel panic occured. This started happening intermittently from there onwards. Then I tried to install GNOME which failed miserably as in it panics and crashes everytime system starts.
Then I tried KDE and things are much better compared to GNOME. The problem is whenever I try logging into a new KDE session, kernel panics. Only KDE Failsafe mode works (with sound). I honestly dont know what to do as I have no idea why the problem is occuring also. I plan to stay with Arch, as nouveau works much better than it used to in Fedora (3d support). Can anybody help with this issue?
Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz GenuineIntel GNU/Linux
10-nouveau.conf
Section "Device"
Identifier "n"
Driver "nouveau"
EndSection
Xorg.0.log
[ 50.605]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 50.605] X Protocol Version 11, Revision 0
[ 50.605] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 50.605] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
[ 50.605] Kernel command line: root=/dev/sda5 ro
[ 50.605] Build Date: 01 November 2010 10:29:19PM
[ 50.605]
[ 50.605] Current version of pixman: 0.20.0
[ 50.605] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.605] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.605] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 01:33:51 2010
[ 50.606] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50.617] (==) No Layout section. Using the first Screen section.
[ 50.617] (==) No screen section available. Using defaults.
[ 50.617] (**) |-->Screen "Default Screen Section" (0)
[ 50.617] (**) | |-->Monitor "<default monitor>"
[ 50.617] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 50.617] (**) | |-->Device "n"
[ 50.617] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 50.617] (==) Automatically adding devices
[ 50.617] (==) Automatically enabling devices
[ 50.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 50.618] Entry deleted from font path.
[ 50.618] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 50.618] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50.618] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.618] (II) Loader magic: 0x7d3360
[ 50.618] (II) Module ABI versions:
[ 50.618] X.Org ANSI C Emulation: 0.4
[ 50.618] X.Org Video Driver: 8.0
[ 50.618] X.Org XInput driver : 11.0
[ 50.618] X.Org Server Extension : 4.0
[ 50.619] (--) PCI:*(0:1:0:0) 10de:0a2a:104d:905e rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 50.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 50.619] (II) LoadModule: "extmod"
[ 50.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50.629] (II) Module extmod: vendor="X.Org Foundation"
[ 50.629] compiled for 1.9.2, module version = 1.0.0
[ 50.629] Module class: X.Org Server Extension
[ 50.629] ABI class: X.Org Server Extension, version 4.0
[ 50.629] (II) Loading extension MIT-SCREEN-SAVER
[ 50.629] (II) Loading extension XFree86-VidModeExtension
[ 50.629] (II) Loading extension XFree86-DGA
[ 50.629] (II) Loading extension DPMS
[ 50.629] (II) Loading extension XVideo
[ 50.629] (II) Loading extension XVideo-MotionCompensation
[ 50.629] (II) Loading extension X-Resource
[ 50.629] (II) LoadModule: "dbe"
[ 50.630] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50.637] (II) Module dbe: vendor="X.Org Foundation"
[ 50.637] compiled for 1.9.2, module version = 1.0.0
[ 50.637] Module class: X.Org Server Extension
[ 50.637] ABI class: X.Org Server Extension, version 4.0
[ 50.637] (II) Loading extension DOUBLE-BUFFER
[ 50.637] (II) LoadModule: "glx"
[ 50.637] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.650] (II) Module glx: vendor="X.Org Foundation"
[ 50.650] compiled for 1.9.2, module version = 1.0.0
[ 50.650] ABI class: X.Org Server Extension, version 4.0
[ 50.650] (==) AIGLX enabled
[ 50.650] (II) Loading extension GLX
[ 50.651] (II) LoadModule: "record"
[ 50.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50.652] (II) Module record: vendor="X.Org Foundation"
[ 50.652] compiled for 1.9.2, module version = 1.13.0
[ 50.652] Module class: X.Org Server Extension
[ 50.652] ABI class: X.Org Server Extension, version 4.0
[ 50.652] (II) Loading extension RECORD
[ 50.652] (II) LoadModule: "dri"
[ 50.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.661] (II) Module dri: vendor="X.Org Foundation"
[ 50.661] compiled for 1.9.2, module version = 1.0.0
[ 50.661] ABI class: X.Org Server Extension, version 4.0
[ 50.661] (II) Loading extension XFree86-DRI
[ 50.661] (II) LoadModule: "dri2"
[ 50.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50.662] (II) Module dri2: vendor="X.Org Foundation"
[ 50.662] compiled for 1.9.2, module version = 1.2.0
[ 50.662] ABI class: X.Org Server Extension, version 4.0
[ 50.662] (II) Loading extension DRI2
[ 50.662] (II) LoadModule: "nouveau"
[ 50.662] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 50.675] (II) Module nouveau: vendor="X.Org Foundation"
[ 50.675] compiled for 1.9.0, module version = 0.0.16
[ 50.675] Module class: X.Org Video Driver
[ 50.675] ABI class: X.Org Video Driver, version 8.0
[ 50.675] (II) NOUVEAU driver
[ 50.675] (II) NOUVEAU driver for NVIDIA chipset families :
[ 50.675] RIVA TNT (NV04)
[ 50.675] RIVA TNT2 (NV05)
[ 50.675] GeForce 256 (NV10)
[ 50.675] GeForce 2 (NV11, NV15)
[ 50.675] GeForce 4MX (NV17, NV18)
[ 50.675] GeForce 3 (NV20)
[ 50.675] GeForce 4Ti (NV25, NV28)
[ 50.675] GeForce FX (NV3x)
[ 50.675] GeForce 6 (NV4x)
[ 50.675] GeForce 7 (G7x)
[ 50.675] GeForce 8 (G8x)
[ 50.675] (++) using VT number 7
[ 50.676] drmOpenDevice: node name is /dev/dri/card0
[ 50.676] drmOpenDevice: open result is 7, (OK)
[ 50.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 50.676] drmOpenDevice: node name is /dev/dri/card0
[ 50.676] drmOpenDevice: open result is 7, (OK)
[ 50.676] drmOpenByBusid: drmOpenMinor returns 7
[ 50.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 50.676] (II) [drm] nouveau interface version: 0.0.16
[ 50.676] (II) Loading sub module "dri"
[ 50.676] (II) LoadModule: "dri"
[ 50.677] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.677] (II) NOUVEAU(0): Loaded DRI module
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenByBusid: drmOpenMinor returns 8
[ 50.677] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 50.677] (II) [drm] DRM interface version 1.4
[ 50.677] (II) [drm] DRM open master succeeded.
[ 50.677] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
[ 50.677] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50.677] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 50.677] (==) NOUVEAU(0): RGB weight 888
[ 50.677] (==) NOUVEAU(0): Default visual is TrueColor
[ 50.677] (==) NOUVEAU(0): Using HW cursor
[ 50.696] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 50.794] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 50.803] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 50.804] (II) NOUVEAU(0): EDID for output LVDS-1
[ 50.804] (II) NOUVEAU(0): Manufacturer: SNY Model: 5fa Serial#: 0
[ 50.804] (II) NOUVEAU(0): Year: 2002 Week: 45
[ 50.804] (II) NOUVEAU(0): EDID Version: 1.4
[ 50.804] (II) NOUVEAU(0): Digital Display Input
[ 50.804] (II) NOUVEAU(0): 6 bits per channel
[ 50.804] (II) NOUVEAU(0): Digital interface is undefined
[ 50.804] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 50.804] (II) NOUVEAU(0): Gamma: 1.00
[ 50.804] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 50.804] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 50.804] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 50.804] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 50.804] (II) NOUVEAU(0): redX: 0.600 redY: 0.342 greenX: 0.295 greenY: 0.570
[ 50.804] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111 whiteX: 0.312 whiteY: 0.328
[ 50.804] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 50.804] (II) NOUVEAU(0): Supported detailed timing:
[ 50.804] (II) NOUVEAU(0): clock: 72.0 MHz Image Size: 309 x 174 mm
[ 50.804] (II) NOUVEAU(0): h_active: 1366 h_sync: 1424 h_sync_end 1482 h_blank_end 1540 h_border: 0
[ 50.804] (II) NOUVEAU(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0
[ 50.804] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
[ 50.804] (II) NOUVEAU(0): Monitor name: t Flat Panel
[ 50.804] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 47 kHz, PixClock max 85 MHz
[ 50.804] (II) NOUVEAU(0): EDID (in hex):
[ 50.804] (II) NOUVEAU(0): 00ffffffffffff004dd9fa0500000000
[ 50.804] (II) NOUVEAU(0): 2d0c0104901f1100eaa8e099574b9225
[ 50.804] (II) NOUVEAU(0): 1c505400000001010101010101010101
[ 50.804] (II) NOUVEAU(0): 010101010101201c56ae50000c303a3a
[ 50.804] (II) NOUVEAU(0): 440035ae10000018000000fc004e7669
[ 50.804] (II) NOUVEAU(0): 6469612044656661756c000000fc0074
[ 50.804] (II) NOUVEAU(0): 20466c61742050616e656c00000000fd
[ 50.804] (II) NOUVEAU(0): 00003d1d2f0800002020202020000003
[ 50.804] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[ 50.804] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 50.804] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 50.804] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.804] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 50.903] (II) NOUVEAU(0): EDID for output VGA-1
[ 50.912] (II) NOUVEAU(0): EDID for output HDMI-1
[ 50.912] (II) NOUVEAU(0): Output LVDS-1 connected
[ 50.912] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 50.912] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 50.912] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 50.912] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
[ 50.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 50.912] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 1376)
[ 50.912] (**) NOUVEAU(0): Driver mode "1366x768": 72.0 MHz (scaled from 0.0 MHz), 46.8 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 50.912] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
[ 50.912] (**) NOUVEAU(0): DPI set to (111, 114)
[ 50.912] (II) Loading sub module "wfb"
[ 50.912] (II) LoadModule: "wfb"
[ 50.912] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 50.972] (II) Module wfb: vendor="X.Org Foundation"
[ 50.972] compiled for 1.9.2, module version = 1.0.0
[ 50.972] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.972] (II) Loading sub module "fb"
[ 50.972] (II) LoadModule: "fb"
[ 50.972] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 50.992] (II) Module fb: vendor="X.Org Foundation"
[ 50.992] compiled for 1.9.2, module version = 1.0.0
[ 50.992] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.992] (II) Loading sub module "exa"
[ 50.992] (II) LoadModule: "exa"
[ 50.992] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 50.993] (II) Module exa: vendor="X.Org Foundation"
[ 50.993] compiled for 1.9.2, module version = 2.5.0
[ 50.993] ABI class: X.Org Video Driver, version 8.0
[ 50.993] (II) Loading sub module "shadowfb"
[ 50.993] (II) LoadModule: "shadowfb"
[ 50.994] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 50.994] (II) Module shadowfb: vendor="X.Org Foundation"
[ 50.994] compiled for 1.9.2, module version = 1.0.0
[ 50.994] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.994] (--) Depth 24 pixmap format is 32 bpp
[ 50.999] (II) NOUVEAU(0): Opened GPU channel 2
[ 50.999] (II) NOUVEAU(0): [DRI2] Setup complete
[ 50.999] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 50.999] (II) NOUVEAU(0): GART: 512MiB available
[ 51.001] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 51.027] (II) EXA(0): Driver allocated offscreen pixmaps
[ 51.027] (II) EXA(0): Driver registered support for the following operations:
[ 51.027] (II) Solid
[ 51.027] (II) Copy
[ 51.027] (II) Composite (RENDER acceleration)
[ 51.027] (II) UploadToScreen
[ 51.027] (II) DownloadFromScreen
[ 51.027] (==) NOUVEAU(0): Backing store disabled
[ 51.027] (==) NOUVEAU(0): Silken mouse enabled
[ 51.029] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 51.029] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 51.029] (==) NOUVEAU(0): DPMS enabled
[ 51.029] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 51.029] (--) RandR disabled
[ 51.029] (II) Initializing built-in extension Generic Event Extension
[ 51.029] (II) Initializing built-in extension SHAPE
[ 51.029] (II) Initializing built-in extension MIT-SHM
[ 51.029] (II) Initializing built-in extension XInputExtension
[ 51.029] (II) Initializing built-in extension XTEST
[ 51.029] (II) Initializing built-in extension BIG-REQUESTS
[ 51.029] (II) Initializing built-in extension SYNC
[ 51.029] (II) Initializing built-in extension XKEYBOARD
[ 51.029] (II) Initializing built-in extension XC-MISC
[ 51.029] (II) Initializing built-in extension SECURITY
[ 51.029] (II) Initializing built-in extension XINERAMA
[ 51.029] (II) Initializing built-in extension XFIXES
[ 51.029] (II) Initializing built-in extension RENDER
[ 51.029] (II) Initializing built-in extension RANDR
[ 51.029] (II) Initializing built-in extension COMPOSITE
[ 51.029] (II) Initializing built-in extension DAMAGE
[ 51.225] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 51.225] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 51.225] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 51.225] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 51.225] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
[ 51.225] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 51.227] (II) NOUVEAU(0): NVEnterVT is called.
[ 51.245] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
[ 51.245] resize called 1366 768
[ 51.660] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
[ 51.660] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 51.660] (II) LoadModule: "evdev"
[ 51.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 51.676] (II) Module evdev: vendor="X.Org Foundation"
[ 51.676] compiled for 1.9.0, module version = 2.5.0
[ 51.676] Module class: X.Org XInput Driver
[ 51.676] ABI class: X.Org XInput driver, version 11.0
[ 51.676] (**) Sony Vaio Keys: always reports core events
[ 51.676] (**) Sony Vaio Keys: Device: "/dev/input/event5"
[ 51.700] (--) Sony Vaio Keys: Found keys
[ 51.700] (II) Sony Vaio Keys: Configuring as keyboard
[ 51.700] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[ 51.700] (**) Option "xkb_rules" "evdev"
[ 51.700] (**) Option "xkb_model" "evdev"
[ 51.700] (**) Option "xkb_layout" "us"
[ 51.723] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 51.723] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 51.723] (**) Video Bus: always reports core events
[ 51.723] (**) Video Bus: Device: "/dev/input/event4"
[ 51.726] (--) Video Bus: Found keys
[ 51.726] (II) Video Bus: Configuring as keyboard
[ 51.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 51.726] (**) Option "xkb_rules" "evdev"
[ 51.726] (**) Option "xkb_model" "evdev"
[ 51.726] (**) Option "xkb_layout" "us"
[ 51.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 51.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 51.743] (**) Power Button: always reports core events
[ 51.743] (**) Power Button: Device: "/dev/input/event2"
[ 51.756] (--) Power Button: Found keys
[ 51.756] (II) Power Button: Configuring as keyboard
[ 51.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 51.756] (**) Option "xkb_rules" "evdev"
[ 51.756] (**) Option "xkb_model" "evdev"
[ 51.756] (**) Option "xkb_layout" "us"
[ 51.757] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 51.757] (II) No input driver/identifier specified (ignoring)
[ 51.760] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event7)
[ 51.760] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
[ 51.760] (**) UVC Camera (05ca:18b5): always reports core events
[ 51.760] (**) UVC Camera (05ca:18b5): Device: "/dev/input/event7"
[ 51.783] (--) UVC Camera (05ca:18b5): Found keys
[ 51.783] (II) UVC Camera (05ca:18b5): Configuring as keyboard
[ 51.783] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD)
[ 51.783] (**) Option "xkb_rules" "evdev"
[ 51.783] (**) Option "xkb_model" "evdev"
[ 51.783] (**) Option "xkb_layout" "us"
[ 51.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 51.784] (II) No input driver/identifier specified (ignoring)
[ 51.786] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 51.786] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 51.786] (**) Logitech USB Receiver: always reports core events
[ 51.786] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[ 51.800] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 51.800] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 51.800] (--) Logitech USB Receiver: Found relative axes
[ 51.800] (--) Logitech USB Receiver: Found x and y relative axes
[ 51.800] (II) Logitech USB Receiver: Configuring as mouse
[ 51.800] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 51.800] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.800] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 51.800] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 51.800] (II) Logitech USB Receiver: initialized for relative axes.
[ 51.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
[ 51.800] (II) No input driver/identifier specified (ignoring)
[ 51.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 51.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 51.801] (**) Logitech USB Receiver: always reports core events
[ 51.801] (**) Logitech USB Receiver: Device: "/dev/input/event11"
[ 51.816] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 51.816] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 51.816] (--) Logitech USB Receiver: Found relative axes
[ 51.816] (--) Logitech USB Receiver: Found absolute axes
[ 51.816] (--) Logitech USB Receiver: Found keys
[ 51.816] (II) Logitech USB Receiver: Configuring as mouse
[ 51.816] (II) Logitech USB Receiver: Configuring as keyboard
[ 51.816] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 51.816] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.816] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 51.816] (**) Option "xkb_rules" "evdev"
[ 51.816] (**) Option "xkb_model" "evdev"
[ 51.816] (**) Option "xkb_layout" "us"
[ 51.816] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 51.817] (II) Logitech USB Receiver: initialized for absolute axes.
[ 51.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 51.821] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 51.821] (**) AT Translated Set 2 keyboard: always reports core events
[ 51.821] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 51.843] (--) AT Translated Set 2 keyboard: Found keys
[ 51.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 51.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 51.843] (**) Option "xkb_rules" "evdev"
[ 51.843] (**) Option "xkb_model" "evdev"
[ 51.843] (**) Option "xkb_layout" "us"
[ 51.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 51.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 51.843] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 51.844] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 51.856] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 51.856] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 51.856] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 51.856] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 51.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 51.857] (II) No input driver/identifier specified (ignoring)
[ 51.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 51.857] (II) No input driver/identifier specified (ignoring)
[ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
[ 51.858] (II) No input driver/identifier specified (ignoring)
[ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 51.858] (II) No input driver/identifier specified (ignoring)
[ 80.420] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[ 80.420] (II) NOUVEAU(0): Using hsync ranges from config file
[ 80.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 80.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.420] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
dmesg.log
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.841 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422803)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10111.72 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x0800-0x0803] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290907981.066:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-28 01:33:02 UTC (1290907982)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226256
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226255
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226252
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226251
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226241
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226214
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226213
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226212
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226211
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226210
EXT4-fs (sda5): 10 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[958]: starting version 164
fuse init (API version 7.15)
iTCO_vendor_support: vendor-support=0
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (55 C)
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (55 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2:I tried another fresh install to see if me installing GNOME before messed up anything. The same problem persists, I made another fresh install. I only did a net install with Arch Linux core and haven't yet installed xorg or anything yet (havent even synced pacman yet). Weirdly nouveau is already loaded, this is the output of dmesg,
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.164 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.92 BogoMIPS (lpj=8423880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.47 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x0800-0x0803] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290893788.056:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-27 21:36:28 UTC (1290893788)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[949]: starting version 164
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sony-laptop: Sony Notebook Control Driver v0.6.
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: AC Adapter [ADP1] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (56 C)
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input2
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
input: Sony Vaio Jogdial as /devices/virtual/input/input3
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (56 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
usb 1-2: new high speed USB device using ehci_hcd and address 2
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMI1 [io 0x0800-0xffff0803 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
usb 2-1: new high speed USB device using ehci_hcd and address 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
firewire_core: created device fw0: GUID 080046030321aebd, S400
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 7-1: new full speed USB device using uhci_hcd and address 2
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-agn-rs'
usbcore: registered new interface driver hiddev
usb 8-1: new full speed USB device using uhci_hcd and address 2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
scsi 4:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[TTM] Zone kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013bfac400
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6. Priority:-1 extents:1 across:2803304k
wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
wlan0: authenticated
wlan0: associate with 94:44:52:78:c1:98 (try 1)
wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
wlan0: associated
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.035 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.65 BogoMIPS (lpj=8423450)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.21 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791 -
Kernel Panics during startups - cannot boot anymore
First: Sorry for my bad english - i hope you still can understand...
The facts:
- MacBook 2,0Ghz - 2gb Ram.
- After 8 weeks --> random shutdowns. In OSX, in Bootcamp, in any application, even during booting OSX
- Replacement of the logic board, after suggested by AppleCare
- After that: OSX instable. Totally. Safari, DVD Player, Firefox, Adium.... any application crashed almost every 5 minutes
- Even sometimes: Kernel Panics. One time even at the login screen
--> I tried a reinstall --> Archive & Install
- DURING the installation of DVD 2 --> Kernel Panic.
- Sucessfully installed OSX in the second try
- OSX seems to run fine - I do the update to .7 trough SoftwareUpdate
- During reboot --> Kernel Panic.
- and now: during EVERY reboot (short after the apple on grey background) a Kernel Panic. I took a picture of that:
http://tinyurl.co/jon89
And now? I am sad! Crying! I don't know what to do anymore.. I'm writing now in Bootcamp-Windows - this is still running...
ANY suggestions?
sniff,
HauldhagenHi, Hauldhagen. Welcome to the Discussions.
See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Kernel Panics during system boot, and no kind of network connectivity
I've tried quite a lot of things here, so please read them all before you suggest something - and thanks for taking a look at my question (-:
I recently got my Mac Pro back from the AlaskaMacStore (not an actual apple retail store, and they aren't very good at that), having brought it in for loss of FW800. They sent it to Apple, and I received it back, supposedly with a new motherboard - and my FW800 working. However, it proceeded to kernel panic (complete visual system freeze, not greyscreenofdeath - oddly enough, iTunes would never stop playing during them) at least once a day after that.
Not wanting to deal with them again, I just used it like that and put up with it - but soon enough, I lost any sort of network connectivity as well. With AirPort connected to my Time Capsule's network (which worked fine on my Macbook Air and iPhone and various other devices), I was being told "...Self-Assigned IP address, and thus may not be able to connect to the internet...". Even connected directly via Ethernet to the Time Capsule, or directly via Ethernet to the cable modem, or directly via Ethernet to another Mac, or connected to another Mac's ad-hoc network, I could get absolutely no network communication going on of any sort.
This was too much for me, as all of my work requires frequent and heavy internet access, so I gave in and took it back to the local mac store equivalent - they charged me 100$, and kept it two days, just to tell me they 'couldn't reproduce the problem'. I took the Mac Pro to a friend's house, and went through the same tests - connected to his modem, with his Ethernet cords, and to his wireless and other macs. Same deal, no connection or indication of a networking being connected beyond that blasted 'self-assigned IP' in Network prefs.
Having no desire to be defrauded by the local fools again, I decided I didn't really have anything important on my internal hard drive, and decided to wipe the internals and re-install Leopard. My horrible luck continuing, I found my only Leopard disc to be cracked, prompting me to drive out and purchase a new one. Inserting this into my Mac Pro's drive, I found myself faced with yet another horrible problem.
During the boot to the Leopard DVD, the grey loading screen (with the apple logo and the spinner) simply froze with the spinner pointing left. I left it for a while, expecting this to be part of what I'd previously experienced with the slow boot-from-DVD on a Macintosh... but after 30 minutes of waiting, I got quite worried, and booted back into my normal OS by holding down Option and selecting my RAID.
Now, note this for later - it booted absolutely fine, and though I still had no network connectivity, the system had no problems. I changed the startup-disk to my RAID and then back to the Leopard DVD, naïvely thinking this would solve the problem, and ran into the same problem after restarting and booting to the Leopard DVD again.
Dismissing this as a optical drive problem (haven't had occasion to use optical media in nearly 3 years, don't really trust it in general), I booted the Mac Pro into Firewire Target Disk mode, and connected it to my Macbook Pro, and then booted the Macbook Pro from the installation DVD. Again, note carefully here - there was nothing wrong with the DVD itself, as the Macbook Pro had no trouble booting to the DVD.
I used Disk Utility to preform some planned modifications to the internal drives of my Mac Pro (erasing my previous inefficient RAID setup in favor of a new, faster (but less secure) RAID0 striped setup for my main two 1TB drives), and then proceeded to install a fresh Leopard onto the newly minted RAID. I usually cancel the 'disc checksum' that the Leopard DVD runs on itself, not really worrying about it, but in light of recent possible problems with the DVD, I went ahead and let it run - no problems, it completed and went straight into the normal install.
The install itself completed in a timely manner, and my Macbook Pro re-booted automatically, to the newly Leopard-ed RAIDed internals on the Mac Pro. It booted to the new install without a hitch, played the Leopard intro video, and continued to the setup cube. I opted to shut down (by hitting command-q and selecting the shut down option), so I could set it up on the Mac Pro instead.
Surprised was I, when I experienced the same grey loading screen freeze on the Mac Pro, booting to the newly clean install on the new RAID, that I had seen trying to boot to the Leopard disc. Worrying that my Leopard disc was, infact, corrupted in some way, I tried placing the Macbook Pro into firewire Target Disc Mode, and booting that drive over FW800 on the Mac Pro. Same freezing problem occurred.
Well, now, the only installation that HADN'T kernel panicked on boot was the old install, and that had been erased for the new RAID configuration, so I was left without a way to boot to a working install and test things from the Term. This left me with Single User Mode, which I immediately booted into.
Interestingly enough, there was no problem booting into Single User Mode - so I poked around a bit before mounting, and I had seemingly fine access to the entire filesystem of the new Leopard install, and nothing looked screwed up to my (albiet untrained) eye. After mounting and continuing the boot, it froze - but since this was verbose SUM, and not simple normal boot, I was able to see exactly where it froze: something about 'mDNSResponder starting', and then no input or output was accepted, leaving me assuming it had kernel panicked again.
To test this, I again attempted to boot from the Leopard DVD on the Mac Pro, this time in verbose startup mode, and watched it freeze up at exactly the same point. After a little googling, I found some suggestions to disable the launchd plist for mDNSResponder - I tried SUM again, and did so, then continued with the boot. This time, there was no output relating to mDNSResponder, so the launchd change had worked; however, it still froze - this time, right after three lines, first something along the lines of 'Login Window Application Starting', and then two lines printing Ethernet IDs of some sort. After those Ethernet related lines, it again froze.
What with the DNS and Ethernet bits showing up in the freezing, I was getting worried this was still tied into my NIC in some way, so I unplugged my Ethernet cords and tried the exact same boot again, and again disabled mDNSResponder. This time the only sensible thing before the freeze was the 'Login Window Application Starting' line, which seemed perfectly normal. I doubt there is/was anything wrong with that, so I'm assuming there's still some networking-related process freezing/panicking the computer, and it just doesn't happen to log in a visible way during startup.
Does anybody have any suggestion as to what such a process might be, and how I can at least pause or kill it from SUM, so I can at least finish booting the computer?
If I can't figure out a solution to this, I'll have to buy a new Mac Pro tomorrow morning... I have very, very pressing matters that can't wait for a new Mac Pro to ship, nor can they wait for me to ship this one to Apple and back (I live in Alaska, we have at least a weeks wait if nothing is seriously wrong when sending an Apple product in for repairs on our own), and nor can I wait 2 days for the local Apple store to tell me there's nothing wrong with it and then have to wait another week to, again, send it to Apple myself. I don't want to have to shell out for a new, expensive computer when there's a (most likely) perfectly good one sitting here... so any help would be MUCH appreciated.
If you've read this far, phew, you deserve a cookie. That was one... long... post.
(If you care, this post was cross-posted to my blog, at http://blog.elliottcable.name/posts/macpro_epicfail.xhtml)Talk about bad luck.
The point at which the system "freezes" with the gray spinner (and just after the login window app starts) is right about the point the accelerated drivers should kick in for the video card.
So a couple things could be going on.
1) bad video card dragging down the bus
2) The system board is fubar - this I think is likely - issues with onboard ethernet, and whats seems to be video card related.
I would hazard to guess that the PCI-express bus has something wrong with it, ethernet and video live on the bus, SATA, and USB live in the southbridge.
So, looks like a trip to a certified apple dealer/repair center is next for your Mac Pro - probably for a new system board, again?
Something tells me that your system really didn't get to Apple for a new board.
You can verify by looking at the serial ID tag on the system board, note the rev and serial # before and after such repairs. -
Kernel panic during screensaver - OS X 10.7.5
Hello everybody,
my Mac suddenly crashed, a few hours ago, due to a kernel panic ("You need to restart your computer..."). I'm on OS X 10.7.5 . This is my second kernel panic. The other one happened very long time ago. Please notice that my MacBook Pro suddenly freezes - sometimes, and for some time - during the screensaver.
I've submitted the following report to Apple, should I be scared? Is something failing on my MBP? I think not: the line "BSD process name corresponding to current thread: uTorrent" indicates that uTorrent crashed the Mac. Am I right?
Maybe it crashed because of bad interactions with Little Snitch? There is another line indicating that Little Snitch had caused some issues with it: "
Kernel Extensions in backtrace:
at.obdev.nke.LittleSnitch(2.4.4)"
Any help is appreciated. Thanks in advance!
*** REPORT BEGIN ***
Interval Since Last Panic Report: 17382446 sec
Panics Since Last Report: 1
Anonymous UUID: BBBE5138-057E-4801-8987-EF6EABB6C983
Sun Jun 9 07:05:48 2013
panic(cpu 1 caller 0xffffff80002447d9): "zalloc: \"tcpcb\" (16104 elements) retry fail 3, kfree_nop_count: 51"@/SourceCache/xnu/xnu-1699.32.7/osfmk/kern/zalloc.c:1766
Backtrace (CPU 1), Frame : Return Address
0xffffff808df4bcf0 : 0xffffff8000220792
0xffffff808df4bd70 : 0xffffff80002447d9
0xffffff808df4be50 : 0xffffff80003af893
0xffffff808df4be80 : 0xffffff80003d6039
0xffffff808df4beb0 : 0xffffff80005853be
0xffffff808df4bf00 : 0xffffff8000588236
0xffffff808df4bf60 : 0xffffff80005cde98
0xffffff808df4bfb0 : 0xffffff80002daa79
BSD process name corresponding to current thread: uTorrent
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro5,4 (Mac-F22587A1)
System uptime in nanoseconds: 235448102711934
vm objects:22846208
vm object hash entri:2031840
VM map entries:5725040
pv_list:3796992
kalloc.16:120856576
kalloc.64:256233472
kalloc.128:970178560
kalloc.256:6205440
kalloc.512:2433024
kalloc.1024:1236992
kalloc.2048:3272704
kalloc.4096:3715072
kalloc.8192:2244608
vm pages:69136200
ipc ports:1460592
socket:14946952
vnodes:15492312
namecache:6234240
HFS node:20336000
HFS fork:6344704
cluster_write:2385512
buf.4096:9588736
ubc_info zone:3506616
tcpcb:15459840
vnode pager structur:1946160
Kernel Stacks:1671168
PageTables:28008448
Kalloc.Large:8793152
Backtrace suspected of leaking: (outstanding bytes: 235392)
0xffffff80002266bd
0xffffff8000226866
0xffffff7f8163d309
0xffffff7f8163bd0d
0xffffff800059b225
0xffffff800059b57d
0xffffff800058540f
0xffffff8000588236
0xffffff80005cde98
Kernel Extensions in backtrace:
at.obdev.nke.LittleSnitch(2.4.4)[CC6472EC-BC7A-AD8F-3F07-1977181B9E16]@0xffffff 7f81632000->0xffffff7f81677fff
last loaded kext at 233429306570312: com.apple.driver.AppleUSBAudio 2.9.0f5 (addr 0xffffff7f8087e000, size 258048)
last unloaded kext at 235162288328243: com.apple.driver.AppleUSBAudio 2.9.0f5 (addr 0xffffff7f8087e000, size 258048)
loaded kexts:
com.sophos.kext.sav 8.0.14
at.obdev.nke.LittleSnitch 2.4.4
com.apple.driver.iPodSBCDriver 1.6.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.nvenet 2.0.17
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
*** REPORT END ***Here's my educated suggestion:
Uninstall Sophos and any other anti-malware software you may have installed.
Uninstall Little Snitch
Stop using uTorrent.
One or more of the above are likely causing the panics. Also visit The XLab FAQs and read the FAQ on diagnosing kernel panics.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper 2.0.1
2. AppDelete 3.2.6
3. Automaton 1.50
4. Hazel
5. AppCleaner 2.1.0
6. CleanApp
7. iTrash 1.8.2
8. Amnesia
9. Uninstaller 1.15.1
10. Spring Cleaning 11.0.1
For more information visit The XLab FAQs and read the FAQ on removing software. -
Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
1. The computer freezes when the message is shown (cursor stops to blink).
2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
3. Short and long error messages that look similar to this guy's (except for the last line).
I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
BUG: Unable to handle kernel
--[End ...]--
note: udevd[225] exited with preempt_count 2
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
BUG: Unable to handle kernel paging request at f8d20076
Code: Bad EIP value.
EIP: ...
CRZ: ...
--[End ...]--
Kernel panic - not syncing: Attempted to kill the idle task!
Lock: Bad EIP value
Note: modprobe [296] exited with preempt_count 3
WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
BUG: Unable to handle kernel NULL pointer dereference at 00000286
BUG: Unable to handle kernel NULL pointer dereference at (null)
These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
So far I've tried to:
* Use the fallback mode - nope.
* Rerun mkinitcpio -p linux - nope.
* Append noapic and nomodeset to the kernel in GRUB - nope.
* Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
* Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
* Remove my custom settings in /etc/modprobe.d - nope.
* A lot of other things I've forgotten.
Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
Finally, here are some more information.
uname -a:
Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
[2011-08-26 15:14] Running 'pacman-color -Syu'
[2011-08-26 15:14] synchronizing package lists
[2011-08-26 15:18] Running 'pacman-color -Sy pacman'
[2011-08-26 15:18] synchronizing package lists
[2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
[2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2011-08-26 15:19] Generating locales...
[2011-08-26 15:19] en_US.UTF-8... done
[2011-08-26 15:19] en_US.ISO-8859-1... done
[2011-08-26 15:19] sv_SE.UTF-8... done
[2011-08-26 15:19] sv_SE.ISO-8859-1... done
[2011-08-26 15:19] Generation complete.
[2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
[2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
[2011-08-26 15:27] Running 'pacman-color -Syu'
[2011-08-26 15:27] synchronizing package lists
[2011-08-26 15:27] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
[2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:53] Running 'pacman-color -Syu'
[2011-08-26 15:53] synchronizing package lists
[2011-08-26 15:54] starting full system upgrade
[2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
[2011-08-26 16:03] removed heimdal (1.3.3-4)
[2011-08-26 16:03] removed eigen (2.0.15-1)
[2011-08-26 16:03] removed python2-qt (4.8.3-1)
[2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
[2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
[2011-08-26 16:04] removed libreoffice (3.3.2-2)
[2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
[2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
[2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
[2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
[2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
[2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
[2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
[2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
[2011-08-26 16:04] ----------
[2011-08-26 16:04] hostname is now in coreutils
[2011-08-26 16:04] domainname is now in yp-tools
[2011-08-26 16:04] their functionality might have changed slightly
[2011-08-26 16:04]
[2011-08-26 16:04] dnsdomainname remains in net-tools
[2011-08-26 16:04] ----------
[2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
[2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
filesystem: 755 package: 700
[2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
[2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
[2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
[2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
[2011-08-26 16:04] installed libgssglue (0.3-1)
[2011-08-26 16:04] installed libtirpc (0.2.2-2)
[2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
[2011-08-26 16:04] Fixing gshadow file ...
[2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
[2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
[2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
[2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
[2011-08-26 16:04] Updating certificates. This might take a while...
[2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
[2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
[2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
[2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
[2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
[2011-08-26 16:04] warning: directory permissions differ on run/
filesystem: 1777 package: 755
[2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
[2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
[2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
[2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
[2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
[2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
[2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
[2011-08-26 16:05] ATTENTION UDEV:
[2011-08-26 16:05] ----------
[2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
[2011-08-26 16:05] --
[2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
[2011-08-26 16:05] --
[2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
[2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-08-26 16:05] --
[2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
[2011-08-26 16:05] blacklisting in MODULES no longer works.
[2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
[2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
[2011-08-26 16:05] mod1.disable=1
[2011-08-26 16:05] or
[2011-08-26 16:05] modprobe.blacklist=mod1
[2011-08-26 16:05] --
[2011-08-26 16:05] The following modules are no longer unconditionally loaded:
[2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
[2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
[2011-08-26 16:05] --
[2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
[2011-08-26 16:05] --
[2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
[2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
[2011-08-26 16:05] takes precedence.
[2011-08-26 16:05] --
[2011-08-26 16:05] kbd and rtc devices are no longer world readable.
[2011-08-26 16:05] --
[2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
[2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
[2011-08-26 16:05] by X.
[2011-08-26 16:05] ---------------
[2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
[2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
[2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
[2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
[2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
[2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
[2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
[2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
[2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
[2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
[2011-08-26 16:05] installed libssh2 (1.2.9-1)
[2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
[2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
[2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
[2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
[2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
[2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
[2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
[2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
[2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
[2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
[2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
[2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
[2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
[2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
[2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
[2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
[2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
[2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
[2011-08-26 16:06] installed krb5 (1.9.1-3)
[2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
[2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
[2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
[2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
[2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
[2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
[2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
[2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
[2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
[2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
[2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
[2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
[2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
[2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
[2011-08-26 16:06] installed rtmpdump (2.4-1)
[2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
[2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
[2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
[2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
[2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
[2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
[2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
[2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
[2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
[2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
[2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
[2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
[2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
[2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
[2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
[2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
[2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
[2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
[2011-08-26 16:06] installed libupnp (1.6.13-1)
[2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
[2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
[2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
[2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
[2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
[2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
[2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
[2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
[2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-08-26 16:07] installed qjson (0.7.1-1)
[2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
[2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
[2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
[2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
[2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
[2011-08-26 16:08] installed eigen2 (2.0.16-1)
[2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
[2011-08-26 16:08] installed sip (4.12.4-1)
[2011-08-26 16:08] installed pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
[2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
[2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
[2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
[2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
[2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
[2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
[2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
[2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
[2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
[2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
[2011-08-26 16:08] installed nettle (2.2-1)
[2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
[2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
[2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
[2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
[2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
[2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
[2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
[2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
[2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
[2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
[2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
[2011-08-26 16:11] change your entry in /etc/rc.conf
[2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
[2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
[2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
[2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
[2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
[2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
[2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
[2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
[2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
[2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
[2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
[2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
[2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
[2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
[2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
[2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
[2011-08-26 16:11] have been removed from @INC.
[2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
[2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
[2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
[2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
[2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
[2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
[2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
[2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
[2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
[2011-08-26 16:12] installed mpg123 (1.13.3-2)
[2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
[2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
[2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
[2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
[2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
[2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
[2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
[2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
[2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
[2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
[2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
[2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
[2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
[2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2011-08-26 16:12] Updating TeX tree...
[2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
[2011-08-26 16:13] mktexlsr: Done.
[2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
[2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
[2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
[2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
[2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
[2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
[2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
[2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
[2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
[2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
[2011-08-26 16:13] Updating desktop and mime database...done.
[2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
[2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
[2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
[2011-08-26 16:13] installed lcms2 (2.2-1)
[2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
[2011-08-26 16:13] installed iproute2 (2.6.39-1)
[2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
[2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
[2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
[2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
[2011-08-26 16:13] Please append 'quiet' to your kernel command line.
[2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
[2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
[2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
[2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
[2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
[2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
[2011-08-26 16:14] installed qrencode (3.1.1-2)
[2011-08-26 16:14] installed prison (1.0-1)
[2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
[2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
[2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
[2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
[2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
[2011-08-26 16:15] installed ocaml (3.12.1-1)
[2011-08-26 16:15] installed libkipi (4.7.0-2)
[2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
[2011-08-26 16:16] installed libksane (4.7.0-2)
[2011-08-26 16:16] installed libkdcraw (4.7.0-2)
[2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
[2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
[2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
[2011-08-26 16:16] installed libmms (0.6.2-1)
[2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
[2011-08-26 16:16] installed ortp (0.16.5-1)
[2011-08-26 16:16] installed mediastreamer (2.7.3-3)
[2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
[2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
[2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
[2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
[2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
[2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
[2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
[2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-26 16:18] ==> Building image from preset: 'default'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [autodetect]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-26 16:18] 7278 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] ==> Building image from preset: 'fallback'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-26 16:18] 23389 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] installed linux (3.0.3-1)
[2011-08-26 16:18] installed linux-headers (3.0.3-1)
[2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
[2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
[2011-08-26 16:19] upgraded less (443-1 -> 444-1)
[2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
[2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
[2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
[2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
[2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
[2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
[2011-08-26 16:19] installed libtextcat (2.2-8)
[2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] LibreOffice has been split into several packages:
[2011-08-26 16:19] - libreoffice-common
[2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
[2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
[2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
[2011-08-26 16:19] the LibreOffice APIs and for creating
[2011-08-26 16:19] extensions (UNO components).
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] * you need to install at least one libreoffice-langpack
[2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
[2011-08-26 16:19] to see what additional extensions are prepared to install
[2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
[2011-08-26 16:19] for spell checking
[2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
[2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
[2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
[2011-08-26 16:19] installed libwps (0.2.2-1)
[2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
[2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] The jdk package is licensed software.
[2011-08-26 16:20] You MUST read and agree to the license stored in
[2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
[2011-08-26 16:20] Please relogin to include jdk in your PATH
[2011-08-26 16:20] installed jdk (7-3)
[2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
[2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
[2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
[2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
[2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
[2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
[2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
[2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
[2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
[2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
[2011-08-26 16:21] ERROR: Module nvidia is in use
[2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
[2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
[2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
[2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
[2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
[2011-08-26 16:21] ==> Documentation and samples are in separate packages:
[2011-08-26 16:21]
[2011-08-26 16:21] * opencv-docs
[2011-08-26 16:21] * opencv-samples
[2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
[2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
[2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
[2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
[2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
[2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
[2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
[2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
[2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
[2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
[2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
[2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
[2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
[2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
[2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
[2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
[2011-08-26 16:24] updating gtk.immodules... done.
[2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
[2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
[2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
[2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
[2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
[2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:26] Updating font cache... done.
[2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
[2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
[2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:27] Updating font cache... done.
[2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
[2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
[2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
[2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
[2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
[2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
[2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
[2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
[2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
[2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
[2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
[2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
[2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
[2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
[2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
[2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
/etc/rc.conf without any comments:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=()
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
/etc/mkinitcpio.conf without any comments:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata scsi sata filesystems"
Please let me know if you need to know anything else.
Last edited by Mogger (2012-03-30 23:33:38)I've temporarily fixed the problem by doing the following:
removed cryptsetup (1.3.1-2)
removed lvm2 (2.02.88-1)
removed mdadm (3.2.2-4)
removed linux (3.0.6-2)
upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
installed gen-init-cpio (2.6.36-1)
upgraded udev (173-3 -> 167-2)
upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
installed kernel26 (2.6.38.5-1)
upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
MOD_AUTOLOAD="yes"
MODULES=(!usblp !pcspkr)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
Last edited by Mogger (2011-10-11 14:04:20) -
Kernel Panic during hdd intensive process
Hi there,
I have been suffering from kernel panic tipicaly during hdd intesinve process like fixing disk permission, but it often happen during shutdown phase. AHT extended version ran well indicating no problem. Onyx says startup disk should be fine.
Thanks in advance for adding your comments on this one.
This last report has been generated during such process.
By the way, it is funny to have Panics Since Lat Report numbers like this
Interval Since Last Panic Report: 860268 sec
Panics Since Last Report: -3
Anonymous UUID: 9390BD88-7777-4822-BC79-A7C56B45F41B
Wed Dec 21 08:23:28 2011
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002e83d9, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x0000000104dfee58, CR3: 0x0000000001576000, CR4: 0x0000000000000660
RAX: 0xffffff8019798d90, RBX: 0x0000000000000000, RCX: 0x0000000025000000, RDX: 0x0000000000000000
RSP: 0xffffff80f3c23c80, RBP: 0xffffff80f3c23c90, RSI: 0x0000000000000001, RDI: 0xffff7f80197a0920
R8: 0x0000000000000000, R9: 0x000000000000000b, R10: 0x0000000000000020, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8019798c98, R14: 0x000000000000000b, R15: 0x0000000000000000
RFL: 0x0000000000010282, RIP: 0xffffff80002e83d9, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000104dfee58, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f3c23940 : 0xffffff8000220702
0xffffff80f3c239c0 : 0xffffff80002c266d
0xffffff80f3c23b60 : 0xffffff80002d7a1d
0xffffff80f3c23b80 : 0xffffff80002e83d9
0xffffff80f3c23c90 : 0xffffff80002e9f8b
0xffffff80f3c23ce0 : 0xffffff80002fd356
0xffffff80f3c23d30 : 0xffffff80002fceae
0xffffff80f3c23d70 : 0xffffff80002fe81e
0xffffff80f3c23de0 : 0xffffff800030be0a
0xffffff80f3c23e30 : 0xffffff80002fc2d6
0xffffff80f3c23e50 : 0xffffff800054d9d4
0xffffff80f3c23ed0 : 0xffffff8000559a47
0xffffff80f3c23f50 : 0xffffff80005caa9b
0xffffff80f3c23fb0 : 0xffffff80002d8363
BSD process name corresponding to current thread: launchd
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 5636398904826
last loaded kext at 2630356715501: com.apple.filesystems.smbfs 1.7.0 (addr 0xffffff7f807c7000, size 241664)
last unloaded kext at 110223124976: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80ab3000, size 65536)
loaded kexts:
net.telestream.driver.TelestreamAudio 1.0.5
at.obdev.nke.LittleSnitch 2.4.0
com.apple.filesystems.smbfs 1.7.0
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.3f7
com.apple.kext.ATIFramebuffer 7.1.2
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.ATIRadeonX2000 7.1.2
com.apple.driver.AGPM 100.12.42
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AirPort.Atheros40 501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.kext.triggers 1.0
com.apple.driver.AppleMultitouchDriver 220.62.1
com.apple.driver.IOBluetoothHIDDriver 4.0.1f4
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI4800Controller 7.1.2
com.apple.kext.ATISupport 7.1.2
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.iokit.IO80211Family 411.1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i5, 2.66 GHz, 8 GB, SMC 1.54f36
Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528ASQ, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: hub_device, 0x0409 (NEC Corporation), 0x005a, 0xfa140000 / 5
USB Device: hub_device, 0x0409 (NEC Corporation), 0x005a, 0xfa144000 / 6
USB Device: CTL-460, 0x056a (WACOM Co., Ltd.), 0x00d4, 0xfa144300 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: FCR-HS219/1 Mobile Reader, 0x11b0 (ATECH FLASH TECHNOLOGY), 0x6148, 0xfd140000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3opps, and here is the next one during running itunes and downloading some files. Pretty the same...
Interval Since Last Panic Report: 7066 sec
Panics Since Last Report: 1
Anonymous UUID: 9390BD88-7777-4822-BC79-A7C56B45F41B
Wed Dec 21 17:31:49 2011
panic(cpu 1 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f816b1c75, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000011be2e000, CR3: 0x00000000226d1000, CR4: 0x0000000000000660
RAX: 0xffff7f801993fee0, RBX: 0xffffff801bda9080, RCX: 0x0000000003350000, RDX: 0xffffff8014d609d0
RSP: 0xffffff80f25537b0, RBP: 0xffffff80f25537b0, RSI: 0xffffff801bda9080, RDI: 0xffffff8014cc2080
R8: 0x000000000000004b, R9: 0x0000000000000000, R10: 0xffffff7f818cb210, R11: 0xffffff80182db5e8
R12: 0xffffff801e2c7f80, R13: 0xffffff80d36a8120, R14: 0xffffff80d322f000, R15: 0xffffff80d36a8120
RFL: 0x0000000000010282, RIP: 0xffffff7f816b1c75, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000011be2e000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80f2553470 : 0xffffff8000220702
0xffffff80f25534f0 : 0xffffff80002c266d
0xffffff80f2553690 : 0xffffff80002d7a1d
0xffffff80f25536b0 : 0xffffff7f816b1c75
0xffffff80f25537b0 : 0xffffff7f816e56ac
0xffffff80f25537d0 : 0xffffff7f816e5488
0xffffff80f25537e0 : 0xffffff7f816d7e71
0xffffff80f2553800 : 0xffffff7f816e58bb
0xffffff80f2553830 : 0xffffff7f816df9a3
0xffffff80f2553860 : 0xffffff7f816b8d89
0xffffff80f25539f0 : 0xffffff7f816b913e
0xffffff80f2553a10 : 0xffffff7f816c02f1
0xffffff80f2553a50 : 0xffffff7f816c04f7
0xffffff80f2553a90 : 0xffffff7f816801de
0xffffff80f2553b60 : 0xffffff7f8167d397
0xffffff80f2553bc0 : 0xffffff80006523be
0xffffff80f2553be0 : 0xffffff8000652c9a
0xffffff80f2553c40 : 0xffffff800065343b
0xffffff80f2553d80 : 0xffffff80002a3898
0xffffff80f2553e80 : 0xffffff8000223006
0xffffff80f2553eb0 : 0xffffff8000214829
0xffffff80f2553f10 : 0xffffff800021bb58
0xffffff80f2553f70 : 0xffffff80002ae8a0
0xffffff80f2553fb0 : 0xffffff80002d8383
Kernel Extensions in backtrace:
com.apple.ATIRadeonX2000(7.1.2)[C27C8474-7285-3569-8130-F2C040474599]@0xffffff7 f81673000->0xffffff7f818d3fff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8085c000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f80cd0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f80c98000
BSD process name corresponding to current thread: Safari
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 11622201079697
last loaded kext at 11098914284992: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f807c7000, size 36864)
last unloaded kext at 11213409734194: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f807c7000, size 36864)
loaded kexts:
net.telestream.driver.TelestreamAudio 1.0.5
at.obdev.nke.LittleSnitch 2.4.4
com.apple.filesystems.smbfs 1.7.0
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 7.1.2
com.apple.ATIRadeonX2000 7.1.2
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.driver.AGPM 100.12.42
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AirPort.Atheros40 501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.AppleMultitouchDriver 220.62.1
com.apple.driver.IOBluetoothHIDDriver 4.0.1f4
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI4800Controller 7.1.2
com.apple.kext.ATISupport 7.1.2
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.iokit.IO80211Family 411.1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i5, 2.66 GHz, 8 GB, SMC 1.54f36
Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x0000, 0x000000000000000000000000000000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528ASQ, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: hub_device, 0x0409 (NEC Corporation), 0x005a, 0xfa140000 / 5
USB Device: hub_device, 0x0409 (NEC Corporation), 0x005a, 0xfa144000 / 7
USB Device: CTL-460, 0x056a (WACOM Co., Ltd.), 0x00d4, 0xfa144300 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: FCR-HS219/1 Mobile Reader, 0x11b0 (ATECH FLASH TECHNOLOGY), 0x6148, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3 -
Kernel Panic during repair permission
Persistent, even after normal reboots. The repair permission runs fine in the mode where you hold down command and R before startup, I am running Lion btw, but kernel panics occur everytime when you do repair permission under the normal operation system.
Here is the report:
Interval Since Last Panic Report: 84622 sec
Panics Since Last Report: 5
Anonymous UUID: 92887079-933A-4D95-8918-84CE315DF250
Fri Aug 19 15:31:51 2011
panic(cpu 2 caller 0xffffff80002c268d): Kernel trap at 0xffffff80002441ee, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fa2c5980000, CR3: 0x0000000067fb000c, CR4: 0x00000000000606e0
RAX: 0xffffff801423c9c0, RBX: 0xffffff80038f38a0, RCX: 0x0000000009000000, RDX: 0xffffff80038f38b0
RSP: 0xffffff812d03b510, RBP: 0xffffff812d03b5f0, RSI: 0x0000000000000001, RDI: 0xffffff80038f38b0
R8: 0x000000000000006a, R9: 0xffffff812d03b2b6, R10: 0x000000002d031c94, R11: 0x0000000000000000
R12: 0xffffff801e1a6458, R13: 0xffffff8013ac4f80, R14: 0xffbfff801ee57de0, R15: 0xffffff812d03bdb8
RFL: 0x0000000000010202, RIP: 0xffffff80002441ee, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00007fa2c5980000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff812d03b1d0 : 0xffffff8000220702
0xffffff812d03b250 : 0xffffff80002c268d
0xffffff812d03b3f0 : 0xffffff80002d7a3d
0xffffff812d03b410 : 0xffffff80002441ee
0xffffff812d03b5f0 : 0xffffff80002e8dd9
0xffffff812d03b630 : 0xffffff80002e926c
0xffffff812d03b660 : 0xffffff80002ff893
0xffffff812d03b6f0 : 0xffffff80004db54c
0xffffff812d03b7e0 : 0xffffff80004e3769
0xffffff812d03b990 : 0xffffff8000316994
0xffffff812d03b9d0 : 0xffffff80002f492a
0xffffff812d03ba50 : 0xffffff80002f379c
0xffffff812d03baf0 : 0xffffff80003111f8
0xffffff812d03bb90 : 0xffffff800030a280
0xffffff812d03bc50 : 0xffffff800030a7fe
0xffffff812d03bf50 : 0xffffff80005ca88b
0xffffff812d03bfb0 : 0xffffff80002d8383
BSD process name corresponding to current thread: repair_packages
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 155815881397
last loaded kext at 30365293482: com.apple.driver.AppleHWSensor 1.9.4d0 (addr 0xffffff7f8178b000, size 28672)
last unloaded kext at 137460000374: com.apple.driver.AppleUSBUHCI 4.4.0 (addr 0xffffff7f80a4a000, size 65536)
loaded kexts:
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.vmware.kext.vmx86 3.1.3
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AppleHDA 2.1.1f12
com.apple.driver.AppleMikeyDriver 2.1.1f12
com.apple.driver.AppleIntelHDGraphics 7.0.4
com.apple.driver.AGPM 100.12.40
com.apple.driver.AudioAUUC 1.59
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleIntelSNBGraphicsFB 7.0.4
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.driver.AppleIRController 309
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.driver.AirPort.Brcm4331 511.20.10
com.apple.driver.AppleSDXC 1.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.1.1f12
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.1f12
com.apple.iokit.IOHDAFamily 2.1.1f12
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344831
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344831
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.10)
Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9A302, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Boot into Safe Mode and try repairing permissions. Does it still panic? Also, disconnect all external peripherals and see if that makes any difference. Have you repaired the hard drive?
Repair the Hard Drive and Permissions - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Alternatively, restart the computer and after the chime press and hold down the COMMAND and "R" keys until the computer starts from the Recovery HD. -
10.4.5 to 10.4.6; now Kernel Panic during boot
I upgraded my G4 tower last thursday to 10.4.6 and then shut it down for the weekend. Now eveytime I try to boot, I get a Kernel Panic either during the boot or within a few minutes / seconds of logging in.
Is this something that can be fixed with the Disk Utility? Could it be a hardware issue?
Any help would be appreciated
G4 Quicksilver 2002 Mac OS X (10.4.6)Welcome to Apple Discussions!
Kernel panics can be either hardware or hardware driver issues, or directory issues. If your data is backed up, you can try repairing the directory. If your data is not backed up, recovering from such a scenario can be difficult.
http://www.macmaps.com/backup.html
http://www.macmaps.com/kernelpanic.html
and
http://www.macmaps.com/directoryfaq.html
are my three FAQs on these issues. -
Macbook kernel panic during boot + other kernel panics! HELP PLEASE
Hello,
I have a w macbook 2,0 ghz duo (2006 edition), 2gb ram, original HD. Operating system: Tiger OsX (updated).
A couple of weeks ago my mb started to display (during a normal session and even after a stand-by) a big message on screen "Please hold down the power button to restart your computer" etc = kernel panic message.
I took a look at the panic.log file and it said:
BSD process name corresponding to current thread: firefox-bin
So I thought there was something with firefox and, to resolve definetely this problems, I checked my hd using utility then I tried to install Leopard using the DVD(updated again). After installing Leopard I did not receive kernel panic errors related to firefox-bin thread but now I still have kernel panic problems.
These are the error messages:
1. When I boot up the mb, it shows the "restart" message or it FREEZES (doesn't boot up)
2. The log says that the panic error is related to "ACPI" and Io.apple.firewirefamily (what is it???)
3. The panic.log file just says:
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x001a77f5, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x01054000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x0053f0c0, ECX: 0x03db8c34, EDX: 0x284cc000
CR2: 0x00000000, EBP: 0x284cfeb8, ESI: 0x03db8000, EDI: 0x03db8000
EFL: 0x00010087, EIP: 0x001a77f5, CS: 0x00000004, DS: 0x284c000c
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x284cfcc8 : 0x12b4f3 (0x45b13c 0x284cfcfc 0x1335e4 0x0)
0x284cfd18 : 0x1a9c68 (0x464700 0x1a77f5 0xe 0x423eb0)
0x284cfdf8 : 0x1a038d (0x284cfe18 0x1a 0xbd9100 0xbdaaa4)
0x284cfe10 : 0x1a77f5 (0xe 0x3d90048 0xc 0x284c000c)
0x284cfeb8 : 0x13698e (0x3db8000 0x3db8b58 0x3db8c34 0x19eb5b)
0x284cff18 : 0x136dd3 (0x3db801c 0x3db801c 0x284cff78 0x1415cd)
0x284cff58 : 0x136e61 (0x13eddf 0x0 0x0 0x1a336f)
0x284cff78 : 0x13efa4 (0x13eddf 0x0 0x0 0x0)
0x284cffc8 : 0x1a017c (0x0 0x0 0x1a30b5 0x4b11e40)
Backtrace terminated-invalid frame pointer 0
*BSD process name corresponding to current thread: kernel_task*
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
Now it is difficult just to enter mac osx because I'm experiencing MANY kernel panics!!
Anyone know how to fix these problems?
Thank you very much
Riccardommm... still having firefox-bin panic errors...
Here's other logs that I found searching "panic.log" files in my hd:
Wed Feb 11 00:55:32 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x007ff825, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000e90, CR3: 0x01054000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x007ff825, ECX: 0x00000007, EDX: 0x00000003
CR2: 0x00000e90, EBP: 0x3e667d88, ESI: 0x03f11e80, EDI: 0x00000014
EFL: 0x00010202, EIP: 0x007ff825, CS: 0x00000008, DS: 0x3e66000c
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x3e667bb8 : 0x12b4f3 (0x45b13c 0x3e667bec 0x1335e4 0x0)
0x3e667c08 : 0x1a9c68 (0x464700 0x7ff825 0xe 0x463eb0)
0x3e667ce8 : 0x1a038d (0x3e667d08 0x4303de0 0x3d02e68 0x3ef098)
0x3e667d00 : 0x7ff825 (0xe 0x3e0048 0x430000c 0x53000c)
0x3e667d88 : 0x802aa3 (0x3d02000 0x11 0x4304640 0x0)
0x3e667da8 : 0x8e0d9a (0x3d02000 0x4304640 0x1 0x0)
0x3e667dc8 : 0x8e116e (0x43ef800 0x4306480 0x8e0c90 0x43ef800)
0x3e667e48 : 0x412976 (0x43ef800 0x3f02600 0x1 0x3ecd96)
0x3e667ea8 : 0x414219 (0x3f02600 0x43ef800 0x43d6b40 0x43ce1c0)
0x3e667f28 : 0x413a7d (0x3f02600 0x42e1a40 0x0 0x3f1bef)
0x3e667f78 : 0x415111 (0x3f02600 0x8 0x3e667fac 0x1)
0x3e667fc8 : 0x1a017c (0x43c4390 0x0 0x1a30b5 0x3dbb128)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.6)@0x8de000->0x8e6fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.6)@0x7fa000
dependency: com.apple.iokit.IONetworkingFamily(1.6.1)@0x5d6000
com.apple.iokit.IOFireWireFamily(3.4.6)@0x7fa000->0x838fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
2. Tue Feb 10 16:03:36 2009
panic(cpu 0 caller 0x003ECE52): "A driver releasing a(n) OSArray has corrupted the registry\n"@/SourceCache/xnu/xnu-1228.9.59/libkern/c++/OSObject.cpp:241
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x34397b78 : 0x12b4f3 (0x45b13c 0x34397bac 0x1335e4 0x0)
0x34397bc8 : 0x3ece52 (0x49c7dc 0x49c8a4 0x3cf64c4 0x3f48e3)
0x34397c08 : 0x3ecdc2 (0x3cf64c0 0x0 0x1 0x3d04f00)
0x34397c28 : 0x3ece8f (0x3cf64c0 0x0 0x40fe504 0x41a5300)
0x34397c48 : 0x3eeaeb (0x3cf64c0 0x416fa50 0x34397c78 0x41a5300)
0x34397c68 : 0x3ecdc2 (0x40fe500 0x0 0x1 0x3eec3b)
0x34397c88 : 0x3ece8f (0x40fe500 0x0 0x34397cc8 0x0)
0x34397ca8 : 0x40bc93 (0x40fe500 0xc 0x0 0x1a5300)
0x34397cc8 : 0x40be65 (0x41a5300 0x43bde00 0x0 0x41a5300)
0x34397ce8 : 0x4101a4 (0x41a5300 0x41a7780 0x0 0x3cc601c)
0x34397d38 : 0x410357 (0x41a7780 0x4 0x0 0xe00002c2)
0x34397d58 : 0x43bafe (0x41a7780 0x5370c0 0xa03e1000 0x0)
0x34397d78 : 0x189873 (0x3c77460 0x4080570 0x34397dac 0x11dd27)
0x34397db8 : 0x12d506 (0x4080548 0x3d8f49c 0x0 0x0)
0x34397df8 : 0x126609 (0x4080500 0x0 0x7c 0x34397ee4)
0x34397f08 : 0x198153 (0x34397f44 0x0 0x0 0x0)
Backtrace continues...
BSD process name corresponding to current thread: scsid
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
3. Thu Jan 29 12:03:07 2009
panic(cpu 1 caller 0x001A9C68): Kernel trap at 0x0013ed59, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x01054000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x25ecda1d, ECX: 0x04e435d0, EDX: 0x00522b20
CR2: 0x00000018, EBP: 0x34387ec8, ESI: 0x2bcb9a97, EDI: 0x04e95d08
EFL: 0x00010083, EIP: 0x0013ed59, CS: 0x00000004, DS: 0x3438000c
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x34387cf8 : 0x12b4f3 (0x45b13c 0x34387d2c 0x1335e4 0x0)
0x34387d48 : 0x1a9c68 (0x464700 0x13ed59 0xe 0x463eb0)
0x34387e28 : 0x1a038d (0x34387e48 0x2e502020 0x34387e78 0x1404af)
0x34387e40 : 0x13ed59 (0xe 0x459f0048 0xc 0xc)
0x34387ec8 : 0x132810 (0x4e95d08 0x25ecda1d 0x2bcb9a97 0x34387eec)
0x34387f08 : 0x198153 (0x34387f44 0x0 0x0 0x0)
0x34387fc8 : 0x1a0977 (0x46c20e0 0x0 0x1a30b5 0x3cd026c)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffe6f8
BSD process name corresponding to current thread: firefox-bin
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
thanks
Maybe you are looking for
-
I have spent the last week trying to get a new phone.
Last Wednesday I spoke with a lovely young lady in the Charlotte, NC call center. My cell phone was no longer working and I was just a little over a month shy of my renewal date. We had a great conversation and she granted an exception to have me o
-
Can I install a 1 terabite hard drive and update it with time machine?
What would I need to do? I have a 250 gig hard drive now, I would like to install a 1 terabite. Would I need to install the os then update it with the time machine backup to have everything that I have now? I have a MacBook Pro 13 inch with OSX Snow
-
Update 3.1 Failed - Restore error 9/13/1603/1604/1611/2002
Now I know what 13, 1603 and 1604 mean. I've solved those problems. I've gotten it to attempt a restore severa times where it appears to be preparing to upload data then the phone restarts and shows the itunes icon with the USB cable. This is when i'
-
I'm a somewhat new convert to the mac world, so thank you in advance for understanding. I have a Garmin GPS that I was able to connect through USB on a windows PC formerly, but now can't figure out how to get it to connect under my Parallels installa
-
XSL Var definition- passing URL to call a BSP application
Hi all, I have a problem with XSL. I pass an url into a 'var', which then calls this url depending on the particular condition. It all works fine. Now the thing is I want to pass one more parameter in the var, I dont know how to append this to the pr