Kernel Panic (Invalid extent entry)
While trying to run CampTune to expand my Windows partition, I encountered an error. With each OS X reboot attempt, I get a Kernel Panic. Windows partition was not affected. I attempted to repair the disc using the install disc, but initially was getting "no valid packages,"message, but now it says "Invalid extent entry." Fortunately everything was backed up days ago in TM. I first tried an Archive and Install, but that failed. Now as I attempt to re-install Leopard, it's saying that the destination disc needs to be erased.
Re: "no valid packages" "Invalid extent entry" messages; will a clean install fix the problem?
You would need to use Disk Warrior to rebuild the directory in order to fix the error. Erasing the drive and reinstalling OS X should also fix the problem.
"No valid packages" occurs if the /Library/Receipts/ folder or its contents is deleted or corrupted.
Using third-party software to alter the Windows partition will result in the partition no longer being manageable by Boot Camp Assistant. This is not advisable because if you later decide to remove the Windows partition you will have to repartition and reformat the entire hard drive.
Similar Messages
-
What now? I got repair failed "Keys out of order" and "Invalid extent entry"
What now? I tried to verify & then repair disk and I got "repair failed" "Keys out of order" and "Invalid extent entry"
You've booted from your OS installer disk, ran Repair Disk from Disk Utility? If so then you need a stronger disk repair utility like DiskWarrier to rebuild the directory.
BTW, update your profile information. -
Missing Thread Record and Invalid Extent entry when booting
Hi all,
When I boot up my PowerBook G4 it freezes. When I boot into single user mode and run fsck -fy I get the following messages:
** /dev/rdisk0s3
** Root file system
** Checking HFS Plus volume
** Checking Extents Overflow file.
** Checking Catalog file.
Missing thread record (id = 72)
Invalid extent entry
(4, 14531)
** Volume check failed.
I do not have Disk Warrior nor the Apple disks with me. Any help you can provide is greatly appreciated. Navigating my disk in single user mode seems to have all my directories etc.
Thanks!I am trying to back up my data now. I only have my FAT32 formated iPod with me and I'm trying to mount it to backup my photos before I reinstall. Unfortunately I do not see my iPod popping up in /dev at all so I cannot even mount it.
It's a USB connection so I suspect that single user mode doesn't pick it up... Any advice on how to mount a filesystem from my iPod in single user mode is much appreciated.
Thanks. -
I have an iBook 9.2.2 and am getting an error message "Problem: Invalid extent entry, 44165, 4075" when running Disk First Aid. It says Disk First Aid cannot repair this problem. Does anyone have any suggestions on how to repair this problem? THis is a laptop for special needs children.
Welcome to Apple discussions!
The directory on the Hard drive has been corrupted. The "index" of what files are where is out of whack, and there is no way to repair it that is completely risk-free. You will need to take one of two approaches:
1) use an Industrial strength Disk- or File- Repair Utility. Popular ones include alsoft Disk Warrior and Tech Tools (now supplied by Apple when you have an Applecare contract). DO NOT INSTALL these programs until the damage is completely fixed -- Get the CD version and boot from the CD, do the Repair, check again with Disk First Aid, THEN they can be installed, if you wish.
Norton Utilities for Mac has repeatedly failed Mac users by not keeping their software appropriately upgraded to match the Mac Operating System. Using the wrong version can wipe out your Hard Drive.
If you are working within a School System, the school's Tech Support should have a plan and the necessary Utilities and know-how to address these sorts of problems. When you have a large number of computers to look after, these problems come up regularly in Macs and PCs.
-OR-
2) Back up the files you can still read and re-initialize the Hard drive.
Message was edited by: Grant Bennet-Alder -
Error: The underlying task reported failure on exit / INVALID EXTENT ENTRY
In trying to verify my HD, I get this error message:
Verify and Repair disk “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid extent entry
Volume check failed.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
I've tried Disk Utility (not from startup volume) with no luck. I've also run DiskWarrior several times and still get the same message... What am I missing? How do you repair an INVALID EXTENT ENTRY? Is my HD about to bite the dust?
Any help would be much appreciated!
iMac G5 Mac OS X (10.4.6) 1.8 Ghz / 768mb ram1derfullymad,
Welcome to Apple Discussions.
I am surprised that Diskwarrior was not able to take care of this problem, but Handling "overlapped extent allocation" errors reported by Disk Utility or fsck may provide the ultimate solution for you.
Make sure to use Disk Utility to check the S.M.A.R.T. status of your drive. If you get a good report the drive should be OK.
This problem is a characteristic of a full Hard Drive. If that describes your Hard Drive, Freeing space on your Mac OS X startup disk, by Dr. Smoke may prove to be helpful.
;~) -
'fsck -fy' yields "invalid extent entry, invalid node structure"
Hello all,
System seems unstable. Many different apps, including System Preferences, crash on launch.
In Single-User mode (Command-S at boot), ran 'fsck -fy' (multiple times) and the receive the following errors that cannot be repaired:
Invalid extent entry
Invalid node structure
Volume check failed
What options do I have to fix this? No claims by Alsoft (or other disk-fixing utilities I know of) that DiskWarrior works on Intel-based Macs to resolve an issue such as this. Are there really no disk-fixing tools for Intel Macs?
Is the only option to format and reinstall and if so do I have to "zero all data"? And if I have to zero all data, how long will it take?
Thanks for any insight.
Cheers,
Derek
MacBook Pro Mac OS X (10.4.7)Thanks again, iVmichael.
Thanks for your suggestion... So I did boot off of Install DVD and ran Disk Utility from there and here is what it reported:
Checking HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
Invalid extent entry
Volume check failed
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
I tried another suggestion I got from the EIMS-L list which was to use another Mac to repair the MBP in FireWire target disk mode. I did that and was able to run Disk Utility from my other Mac (1.33GHz PowerBook G4) but it reported same errors. On the other Mac I tried to run DiskWarrior 3.0.3 (latest) but it failed to "see" the MBP's disk even though it was mounted and Disk Utility saw it.
So I will probably reformat and reinstall everything!
Thanks for your suggestions... -
Kernel panic/invalid node structure; please help retrieving my files!!
Hi everyone, thank you for your time in advance... if anyone has ideas about how to solve it, I appreciate this very much!
OK, here is how it began: while I was working on the airplane using PowerPoint, the gray spinning wheel appeared after which PowerPoint stopped working. I pressed the power button to exit (all applications froze). (So much for trying to get more work done...)
Next, I powered up the computer but it would not boot up, with only gray spinning wheel showing.
Next, tried to boot up while pressing power button and holding shift key. After some time (10 minutes), an error message appears. Researching it on discussion forums, I found that it is called “kernel panic”. Here is beginning of the message:
panic(cpu 1 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 8\n"@SourceCache/xnu/xnu-1504.15.3/bsd/kern/kern_exec.c:3145
Debugger called: <panic>
[additional information here]
Also, message “You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again” is shown transparently in the middle of the screen over the “panic” message output.
I turned on and off the Power button many times, but I get the same error message.
I also tried Apple Hardware Test but it did not work (it did not generate any messages).
Next, I tried to use the Disk Utility using the Installation Disk that came with the computer. After I clicked “Disk Repair”, here is the log:
Verify and Repair volume “Macintosh HD”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Invalid node structure
Rebuilding catalog B-tree.
Invalid node structure
[many repeats of “Invalid node structure” ~ about 400 repeats]
Rechecking volume.
Checking Journaled JFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id=18)
Missing thread record (id=110)
[many instances of “Missing thread record” ~about 200 repeats]
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
The volume Macintosh HD could not be verified completely.
Error: Disk Utility can’t repair this disk…disk, and restore your back-up files.
At the end, a window presented over the error log stated :
“Disk Utility stopped repairing “Macintosh HD”
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your back-up files.
I need to retrieve my recent files!! Please Help!! Argh!! I promise that I will promptly back up my files now! I did not use Time Machine, and only some of my files are backed up.
From what I read on the discussion forum, I will probably need to erase the disk and then do a fresh installation, but could someone please guide me with regard to how to back up the data / retrieve the files? I may have access to another mac so I’m thinking that the FireWire Target Disk Mode may work. I also have spare external harddrive (formatted for mac) (not partitioned). Also, how do I retrieve the files from the other computer if the FireWire transfer works?
Also, the second step is to do a new installation, but is there any reason why “Archive and Install” using Disk Utility won’t help? I have some additional programs installed (Illustrator, Photoshop) so this means if I do a new installation, I will need to re-install those as well?
I did some investigation, and it looks like this problem is similar to this:
https://discussions.apple.com/message/18098343#18098343
But my main issue now is to retrieve the files!
Also, how do I investigate whether this problem is due to a failing hard drive or a natural file system corruption ? (so should I get a new harddrive or do a new install).
http://forums.macnn.com/t/459376/heart-attack-invalid-node-structure
I don’t know what is the OS version; it is Snow Leopard OS X ……. I bought it in September 2009.
I appreciate any help, thank you so much for your time…Create a data recovery/undelete external boot drive
Step by Step to fix your Mac
Most commonly used backup methods -
Kernel Panic - invalid backlight duty cycle - after upgrade from 10.5.2 on macbook air A1237
Here is the short version. I bought an older orignial Macbook Air Model A1237. The hinges had been damaged, and the screen would not display correctly - it had lines all across it and you could not see what you were doing. Anyway - I replaced the screen, hard drive, logic board, upper case, pretty much everything in sucession in an effort to get the MBA up and running again and get rid of the kernel panic I keep getting, all Apple replacement OEM parts. I bought a replacement screen - making sure I checked compatibility etc.. but when it started up I felt great perfect view - all was good - then it kernel paniced. I finally figured out that if I turned up the backlight manually all the way to max or if the ambient sensor made the backlight go to max - these were the only time I get a panic. Otherwise it runs perfeclty. The odd thing is I bought the original MBA disc that would have came with the MBA brand new - and if I wipe the hard drive and install leopard 10.5.2 from the dics and do not update anything - it works 100% perfectly no kernel panic at all. If I updgrade beyond the 10.5.2 I get the panic back. So that tells me its not the hardware, and I have confirmed the hardware and firmware are all up to date, as I was hoping it would be that easy a fix of updating the firmware. I have tried everything - googled everything - I am at the end of my rope on this one - please help.
In addition to all the repair work - i have tried test user, upgrading to snow leopard and lion, taking to the apple store, everything I can do , with no solid answer - the apple store told me it was hardware. But if it was then 10.5.2 should generate the panic as well. There are lots of articles and posts on other forums on this very issue - usually surrounding having the MBA display repaired and then they started getting the panics thereafter - but no one has ever recieved an answer either at all, or that works.
Here is the KP log below - please let me know your thoughts - id like to upgrade to lion to get the most out of the MBA - any help is appreciated - - - - - heres the log - - - - ( the reason the BSD states at loginwindow is the ambient sensor at that time kicks in and creates the panic ):
Interval Since Last Panic Report: 3873 sec
Panics Since Last Report: 1
Anonymous UUID: 3A665154-0D6B-4EDF-8F76-80C322CF134A
Mon Aug 27 23:04:07 2012
panic(cpu 0 caller 0x2E42320C): "IG: Invalid backlight duty cycle value"@/SourceCache/GraphicsDrivers/GraphicsDrivers-5.48.6/Common/GLKernel/Inte l/IntelIntegratedFramebuffer/IntelGMAX3100FB.cpp:7065
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2e3dbaa8 : 0x12b4c6 (0x45f91c 0x2e3dbadc 0x13355c 0x0)
0x2e3dbaf8 : 0x2e42320c (0x2e431258 0xa4aa 0x2e3dbb18 0x0)
0x2e3dbb18 : 0x2e425434 (0x3af6c00 0x5f40 0xe 0x0)
0x2e3dbb68 : 0x2e4d2283 (0x3e75000 0x0 0x626b6c74 0x5f40)
0x2e3dbbd8 : 0x2e3f9769 (0x4639e00 0x4107280 0x3a6ace0 0x80)
0x2e3dbc08 : 0x2e3f724c (0x48f2a00 0x4107280 0x3a6ace0 0x80)
0x2e3dbc38 : 0x2e3f785d (0x48f2a00 0x80 0x2e3dbc68 0x3f158d)
0x2e3dbc58 : 0x2e3f71db (0x48f2a00 0x80 0x2e3dbc88 0x3f0942)
0x2e3dbc78 : 0x2e3f9475 (0x48f2a00 0x430c640 0x3a6ace0 0x80)
0x2e3dbca8 : 0x2e3f92b9 (0x48f2a00 0x430c640 0x3a6ace0 0x80)
0x2e3dbd28 : 0x440edf (0x48f2a00 0x3feb880 0x44 0x11e7de)
0x2e3dbd78 : 0x18b71a (0x48f2a00 0x3fea900 0x44 0x407c7c0)
0x2e3dbdb8 : 0x12d4d6 (0x3b92090 0x407c79c 0x2e3dbdf8 0x11f1c6)
0x2e3dbdf8 : 0x1264fa (0x3b92000 0x392e984 0x408226c 0x0)
0x2e3dbf08 : 0x198fa3 (0x2e3dbf44 0x0 0x0 0x0)
0x2e3dbfc8 : 0x1a1cfa (0x398d120 0x0 0x1a40b5 0x3dc0c80)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleBacklight(1.6.0)@0x2e4d0000->0x2e4d3fff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x2e435000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2e2d5000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x2e3f5000
com.apple.driver.AppleIntelGMAX3100FB(5.4.8)@0x2e41c000->0x2e434fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2e2d5000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x2e3f5000
dependency: com.apple.driver.AppleSMC(2.3.1d1)@0x2e412000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x2e2ec000
com.apple.iokit.IOGraphicsFamily(1.7.3)@0x2e3f5000->0x2e411fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2e2d5000
BSD process name corresponding to current thread: loginwindow
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBookAir1,1 (Mac-F42C8CC8)
System uptime in nanoseconds: 58935778708
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleHDAPlatformDriver 1.7.1a2 - last loaded 45739893296
com.apple.driver.InternalModemSupport 2.4.0
com.apple.iokit.IOBluetoothSerialManager 2.1.9f10
com.apple.filesystems.autofs 2.0.2
com.apple.driver.DiskImages 199
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.1a2
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.AppleHDA 1.7.1a2
com.apple.driver.ApplePlatformEnabler 1.0.2d1
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.driver.AppleIntelGMAX3100 5.4.8
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.driver.AppleIRController 113
com.apple.driver.AirPortBrcm43xx 367.91.22
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.AppleIntelGMAX3100FB 5.4.8
com.apple.driver.AppleUSBTCButtons 1.7.4f1
com.apple.driver.AppleUSBMultitouch 189.35
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.1.9f10
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATABlockStorage 2.0.6
com.apple.driver.AppleUSBHub 3.4.9
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 158.10.5
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBBluetoothHCIController 2.1.9f10
com.apple.iokit.IOBluetoothFamily 2.1.9f10
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6So I found a post on a random forum that offered a fix that I have tried and it worked. Background: I had a cracked LCD screen on a A1237, and I replaced a new screen and a battery. I started getting kernel panics when the brightness went to the highest level. Anyways, what you do is you need to get this file from a apple os x 10.5:
/System/Library/Extensions/AppleIntelGMAX3100FB.kext
then:
Install the .kext file you just grabbed by dragging it into Kext Utility (which can be downloaded here: http://cvad-mac.narod.ru/index/0-4)
then:
Shut down the machine. Reset SMC and PRAM (SMC: http://support.apple.com/kb/ht3964, PRAM:http://support.apple.com/kb/ht1379)
and the problem is fixed. If you google a bit, you can find an os x 10.5.2 AppleIntelGMAX3100FB.kext file at to use.
The original fix I found was posted here:
http://forums.macrumors.com/showthread.php?t=880800
Edit:
Just to clarify, my mac book air is running snow leopard 10.6.8, and I inserted the file from a 10.5.2. The fix completely eliminated the problem, now I can turn the brightness to max without the kernel panic. -
Disc Utility says it fixed the invalid extent entry but it lied!
Hi guys and gals
Just wondering if anyone else came up with this problem:
My powermac G4 running OS 10.2 only starts up to a blue screen and nothing else. I ran Disc Utility first aid on it and it said it had an "invaild extent entry" which it fixed, but the problem is still there.
I ran Nortons Disc Doctor, which never completely finished but freezes about 3/4 of the way through. Can't run Speed Disc because the drive won't mount.
Ran to the Disc Warrior which did fix some bad directories, but then froze at the "Building Report" stage.
Again I may have to suck it up and erase and reformat the drive, but I didn't back up lately (I know I know bad girl) and again there are some important files that I need to get to.
Any help would be much appriciated!
Thanks in advance!Hi htmlneophytea,
1. disk utility in 10.3.x cannot repair this error. This was only implimented in the Tiger version of disk utility.
2. Your problem has a name: Norton Disc Doctor! Norton Utilities and Disk Doctor were discontinued more than a year ago (for some very good reasons!). It caused much more trouble than it solved.
Here are the articles:
Symantec discontinues Mac Norton Utilities, SystemWorks
Norton Utilities, SystemWorks development halted
TMO Scoop - Symantec Confirms Norton Utilities & SystemWorks' Demise [Updated]
Tech Tool Pro and DiskWarrior are presently the most reliable utilities. For more information on regular housekeeping read this: MacOS X 10.3/10.4: System maintenance -
Kernel panics, crashes and other issues
hi all -
i've been reading through tons of posts over the last week about my issue and trying to resolve it but can't seem to get my machine up and running consistently.
it started crashing consistently on jan 10 - suspiciously the day the itunes update came out - and i have since run the fixes people posted relating to that update to no avail.
i keep getting kernel panics - while i'm running photoshop, safari, word, textedit, ical, etc. i took it to a mac authorized repair shop, but they gave it back to me saying they couldn't duplicate the issue described. it started happening again right away - i unplugged everything except the keyboard and mouse. still got them. have run disk utility from the startup disks several times.
one thing i noticed was it seems to repair the same problem every time - "invalid extent entry". i found a post on this board that said only disk warrior can fix that problem in 10.3.9. disk utility says it fixes it, but it comes up every time...
also - after i downloaded and ran onyx it seemed to be better for the last two days. and then today i plugged my scanner in and tried using it. it crashed photoshop and then everything else started crashing even though i unplugged the scanner. i tried looking for a driver update for it, but os 10 couldn't open the file i downloaded from epson - which was:
TWAIN Driver and EPSON Scan Utility v2.65A
Macintosh OS X (v10.2.x - 10.3.x)
epson11385.sea.hqx - 34.2MB - posted on 04/18/05
a window popped up that said the file didn't appear to be compressed and i should get more information from the manufacturer. i read on this forum that bad drivers can cause kernel panics, but i can't seem to load the update. i also trashed my epson printer driver for good measure.
1) so my first question is: could the invalid extent entry problem be causing kernel panics? or are the two unrelated? should i definitely download disk warrior to fix that?
2) also something i haven't been clear about regarding repairing permissions - do you have to boot from another drive to repair permissions? my internal drive is my startup disk, and i don't have a bootable external drive. i tried repairing permissions with onyx, but it crashes every time. is this because i need to boot from another disk? how do you do that and run onyx?
3) has anyone had the problem with panther not opening the epson 4870 driver update?
i've been trying to solve this for weeks...i'm about to swear off technology altogether and move to the mountains.
thanks for any suggestions you might have!
slowjane
g4 gigabit ethernet powermac dual 500 mhz processor Mac OS X (10.3.9) epson 785epx printer, epson 4870 scanner
g4 gigabit ethernet powermac dual 500 mhz processor Mac OS X (10.3.9)
g4 gigabit ethernet powermac dual 500 mhz processor Mac OS X (10.3.9) epson 785epx printer, epson 4870 scannerYou are doing fine. Don't beat up on yourself (bad ram will do pleanty of that by itself).
Until you get the ram figured out there is no hope for a stable system. If you have bad ram then it will corrupt the system as fast as you can repair it.
If you have the hardware test disk it has a ram tester that can, depending on the system and disk, run in extended(on the menu) or looped mode(command l). It usually reports which stick of ram is bad. On a desktop this is a big deal.
On a laptop it is much easier. You usually have a limited number of ram slots. I don't know what mac you are running because you have not filled out any of the info for your profile.
Pull all but one stick of ram and run on the other to see if that helps. If no change, run on the other stick and see if that helps. If all the ram is non Apple then it could be either. Apple ram is usually, but not always, good ram that stays good. By the way, with the dry weather we are having it is important not to risk static zapping of your mac. The easiest way to ground yourself is to be bare foot then touch the power supply case or other metal interior surface of the computer before tackling the electronics.
I like Crucial Ram but OWC also has a lifetime guarantee and they stand behind the ram. If the vendor of replacement ram has a bench tester then that is the best you can do without putting the ram in your mac.
Once you get good ram in your mac then concentrate on the system. In my opinion, Disk Warrior is the only utility that one needs to purchase for X. It can keep fixing your directory but if the ram is bad X will keep getting corrupted again.
That the permissions are not running off of disk is, yes, a bad sign.
When the ram is replaced;
If you have a backup hard drive I'd make sure that it has, at a minimum, all your user data. You can also do this with cd/dvd's.
Reformat the hard drive and zero it to map out bad blocks.The system and applications can be reloaded later and your user data can be imported to the clean, new system. That is what I would make my mind up on doing.
It may be possible to keep your current system running with good ram and Disk Warrior but the odds are that some files have been corrupted and will rear their ugly heads in the future.
Just my 2 cents. -
For almost two months, I've been trying to resolve a kernel panic issue with a MacBook Pro purchased 6/06. Any help or advice would be greatly appreciated.
Here are the logs of the two most-recent kernel panics (one of which occurred when the user woke the MacBook from sleep; the other may have occurred during a startup, but I'm unsure):
Tue Sep 19 08:30:24 2006
panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000004, CR3: 0x00d65000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x015736dc, ECX: 0x02b02608, EDX: 0x00000000
ESP: 0x00000004, EBP: 0x13c7bf78, ESI: 0x00000000, EDI: 0x02b79894
EFL: 0x00010287, EIP: 0x00161754, CS: 0x00000008, DS: 0x13c70010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13c7bce8 : 0x128b5e (0x3bc46c 0x13c7bd0c 0x131bbc 0x0)
0x13c7bd28 : 0x19cadf (0x3c18e4 0x0 0xe 0x3c169c)
0x13c7bdd8 : 0x197c7d (0x13c7bdec 0x13c7bf78 0x161754 0xcba40048)
0x13c7bde4 : 0x161754 (0xcba40048 0x10 0x4a0010 0x13c70010)
0x13c7bf78 : 0x19c5c6 (0x2b79894 0xb4000 0x0 0x3)
0x13c7bfd8 : 0x197bbb (0x2b02880 0x2b02880 0x15736dc 0x4) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff188
Kernel version:
Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
Thu Sep 21 08:25:24 2006
panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 13=general protection), registers:
CR0: 0x8001003b, CR2: 0xb5b4ead4, CR3: 0x00d65000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x90822ecd, ECX: 0x00001103, EDX: 0x00000450
ESP: 0xffe173e8, EBP: 0xbfffee48, ESI: 0x00000000, EDI: 0x00000000
EFL: 0xb0000206, EIP: 0x0000a5c7, CS: 0x00000074, DS: 0x0000002f
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0xffe17004 : 0x130ee3 (0x42 0x131bbc 0x0 0x0)
0xffe17114 : 0x131d6e (0x3c1eec 0xffe17148 0x131ab8 0x131bbc)
0xffe17154 : 0x1a00b6 (0x3c1eec 0xffe17248 0x0 0x130ee3)
0xffe17264 : 0x1a0509 (0xffe172b4 0x10 0xffe172b4 0x131d6e)
0xffe172b4 : 0x128b5e (0x3bc46c 0xffe172d8 0x131bbc 0x0)
0xffe172f4 : 0x19cadf (0x3c18e4 0x0 0xd 0x3c1688)
0xffe173a4 : 0x197c7d (0xffe173b8 0xbfffee48 0xa5c7 0x37)
0xffe173b0 : 0xa5c7 (0x37 0x0 0x2f 0x2f) Backtrace terminated-invalid frame pointer 0xbfffee48
Kernel version:
Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x426efc : 0x128ab7 (0x3bc410 0x0 0x0 0x0)
0x426f3c : 0x19c427 (0x3c1738 0x0 0x8 0x0)
0x426fec : 0x1985bb (0x8 0x0 0x0 0xd6b000) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
More details: Most if not all of this MacBook Pro's kernel panics have occurred either during startup or when waking from sleep; they occur inconsistently.
When the KPs first surfaced, I used disk utility and noted an error (invalid extent entry). What followed was wiping the hard drive and reinstalling the OS and other applications more than once, including once after calling Apple tech support\. I've zapped PRAM, ran Apple's HW test (indicated no problems) and rebuilt permissions along the way.
The panics persisted, so I called Apple tech support again (case #66615064). As a result, I had the user boot in safe mode. No problems occurred during startups in safe mode, but the user needed to reboot in standard mode to get his work done. There does not seem to be anything in the Library/Startup Items of the Accounts/Login Items that could account for the kernel panics.
I was in the process of setting up an external HD as step #2 of the troubleshooting steps suggested to me by Apple tech support when I came across discussions here suggesting that Airport may be to blame and that a patch had just today (?) become available. The user will be downloading the software update this afternoon, but at this point I don't know if this will solve the issue.
I've also seen posts here indicating the only true solution is a new motherboard. I also understand that external devices may be to blame; the user has an external Apple keyboard, Microsoft USB mouse and Apple display. Here is probably way too much info from the system profiler:
Machine Name: MacBook Pro 15"
Machine Model: MacBookPro1,1
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2 GHz
L2 Cache (shared): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0044.B02
Serial Number: W86178GDVWW
SMC Version: 1.2f10
Sudden Motion Sensor:
State: Enabled
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
EFI Driver Version: 01.00.068
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Depth: 32-bit Color
Built-In: Yes
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Apple Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
DIMM0/BANK 0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
DIMM1/BANK 1:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
Apple Internal Keyboard / Trackpad:
Version: 0.60
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Product ID: 0x0217
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
Microsoft 5-Button Mouse with IntelliEye(TM):
Version: 3.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0047
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
Thanks,
Kevin
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)Thanks to Garret Textor1 and iVmichael, this problem is solved: As soon as I pulled a third-party RAM chip, the kernel panics went away. And Kingston readily is sending a replacement, which is also good news.
Now, I'd like to mark the answers given by Garret and ivMichael with "solved" stars, but I've already marked them as helpful. How do I do this?
Thanks again!
G4 Mac OS X (10.4.7) -
Occasional Kernel Panic and "invalid catalog btree depth info (4.1)"
My Mac is 6 years old, and is functioning OK in general. Occasionally in the morning I find my Mac making a loud noise coming from the fan, blank screen, and as told, it's one of those Kernel Panic crashes where I have to press the power button to shut down, wait 5-10 minutes and power up again to have my Mac get back to normal.
This has happened 3-4 times in the past couple months. Only one time it happened in front of my eyes, while surfing the net, when I suddenly watched the gray curtain coming down with a message to shut down and restart. Again, once I restart -- all is back to normal again...
This morning it happened again, which was disturbing, since just last night I performed my weekly Cocktail run.... This time I decided to do a few tests. I started up from the install CD, run Disk Utility -- all was OK.
I have an external drive, which is my back up and my HD's MIRROR (runs every Saturday morning, using Tri-Backup). So I restarted from that ext. drive, launched Drive Genius 2 to test my HD: ran the Repair utility > Verify --- and it FAILED ("invalid catalog btree depth info (4.1)"), as was the case with REPAIR or REBUILD, all failed.
When rebooting again from my internal HD, launching Drive Genius again, this time testing my ext., MIRRORED drive --- verification was successful.
The only difference between the 2 drives is, my internal drive is S.M.A.R.T-supported, while my ext. is not, if that makes any significance...
One more note: For years now, any attempt to launch Disk Warrior (4.1) has failed.... It just would never complete the launching process (=crash)....
.......OK, that's my story, let's see how good you guys are.........
Thanks!Excuse my ignorance.... I have Console running, and I had launched DW. It crashed, as expected.
NOW: where in Console do I go to get the information that would help figuring why DW has crashed, which of the logs should I select?
Under Logs > CrashReporter I have DiskWarrior.crash.log --- I see a report dated back 2006 (and of an older version of DW), full of "stuff".... I used the CLEAR button, everything was deleted, and today's date showed up on the top, but no report is showing up... Even after I Forced-Quit DW, no report is showing.
When I clicked on another log, and then came back to DW's crash.log -- the same old report from 2006 shows up again...
So clearly this NEW report I should look elsewhere...
---------- EDIT: Go to console.log?
Here is what I get from that time-frame:
2011-11-12 19:07:06.600 python[372] Matcher finalizing...
2011-11-12 19:07:07.190 python[372] JunkMatcher stopped.
Nov 12 19:07:27 my-names-power-mac-g5 authexec: executing /Applications/Utilities/DiskWarrior 4.1/DiskWarrior.app/Contents/MacOS/DiskWarriorRebuildServer
DiskWarriorRebuildServer: Rebuild server lost communications with application, exiting.
2011-11-12 19:11:23.578 Mail[582] Loaded JunkMatcher bundle 1.6.1 (Tiger).
2011-11-12 19:11:23.614 Mail[582] *** -[NSBundle load]: Error loading code /Library/Mail/Bundles/UnsubMailPluginMailAppOSX.mailbundle/Contents/MacOS/Unsub MailPluginMailAppOSX for bundle /Library/Mail/Bundles/UnsubMailPluginMailAppOSX.mailbundle, error code 2 (link edit error code 0, error number 0 ())
2011-11-12 19:11:24.632 python[585] JunkMatcher Engine 1.6.1 listening at port 50000.
2011-11-12 19:11:24.657 python[585] Matcher initialization completed.
Nov 12 19:16:57 my-names-power-mac-g5 authexec: executing /Applications/Utilities/DiskWarrior 4.1/DiskWarrior.app/Contents/MacOS/DiskWarriorRebuildServer
DiskWarriorRebuildServer: Rebuild server lost communications with application, exiting.
Message was edited by: mynameismyname -
Help!! Kernel panics after installation!!
Hi,
I am new to Arch Linux (migrating from Fedora). I am having some problems with the installation on my Sony VAIO CW (C2D, Nvidia GT230M). At first I couldn't get past the installation of X in the Beginner's guide, but after some tweaking with conf files I finally got it to work. But after reboot, kernel panic occured. This started happening intermittently from there onwards. Then I tried to install GNOME which failed miserably as in it panics and crashes everytime system starts.
Then I tried KDE and things are much better compared to GNOME. The problem is whenever I try logging into a new KDE session, kernel panics. Only KDE Failsafe mode works (with sound). I honestly dont know what to do as I have no idea why the problem is occuring also. I plan to stay with Arch, as nouveau works much better than it used to in Fedora (3d support). Can anybody help with this issue?
Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz GenuineIntel GNU/Linux
10-nouveau.conf
Section "Device"
Identifier "n"
Driver "nouveau"
EndSection
Xorg.0.log
[ 50.605]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 50.605] X Protocol Version 11, Revision 0
[ 50.605] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 50.605] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
[ 50.605] Kernel command line: root=/dev/sda5 ro
[ 50.605] Build Date: 01 November 2010 10:29:19PM
[ 50.605]
[ 50.605] Current version of pixman: 0.20.0
[ 50.605] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.605] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.605] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 01:33:51 2010
[ 50.606] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50.617] (==) No Layout section. Using the first Screen section.
[ 50.617] (==) No screen section available. Using defaults.
[ 50.617] (**) |-->Screen "Default Screen Section" (0)
[ 50.617] (**) | |-->Monitor "<default monitor>"
[ 50.617] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 50.617] (**) | |-->Device "n"
[ 50.617] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 50.617] (==) Automatically adding devices
[ 50.617] (==) Automatically enabling devices
[ 50.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 50.618] Entry deleted from font path.
[ 50.618] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 50.618] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50.618] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.618] (II) Loader magic: 0x7d3360
[ 50.618] (II) Module ABI versions:
[ 50.618] X.Org ANSI C Emulation: 0.4
[ 50.618] X.Org Video Driver: 8.0
[ 50.618] X.Org XInput driver : 11.0
[ 50.618] X.Org Server Extension : 4.0
[ 50.619] (--) PCI:*(0:1:0:0) 10de:0a2a:104d:905e rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 50.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 50.619] (II) LoadModule: "extmod"
[ 50.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50.629] (II) Module extmod: vendor="X.Org Foundation"
[ 50.629] compiled for 1.9.2, module version = 1.0.0
[ 50.629] Module class: X.Org Server Extension
[ 50.629] ABI class: X.Org Server Extension, version 4.0
[ 50.629] (II) Loading extension MIT-SCREEN-SAVER
[ 50.629] (II) Loading extension XFree86-VidModeExtension
[ 50.629] (II) Loading extension XFree86-DGA
[ 50.629] (II) Loading extension DPMS
[ 50.629] (II) Loading extension XVideo
[ 50.629] (II) Loading extension XVideo-MotionCompensation
[ 50.629] (II) Loading extension X-Resource
[ 50.629] (II) LoadModule: "dbe"
[ 50.630] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50.637] (II) Module dbe: vendor="X.Org Foundation"
[ 50.637] compiled for 1.9.2, module version = 1.0.0
[ 50.637] Module class: X.Org Server Extension
[ 50.637] ABI class: X.Org Server Extension, version 4.0
[ 50.637] (II) Loading extension DOUBLE-BUFFER
[ 50.637] (II) LoadModule: "glx"
[ 50.637] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.650] (II) Module glx: vendor="X.Org Foundation"
[ 50.650] compiled for 1.9.2, module version = 1.0.0
[ 50.650] ABI class: X.Org Server Extension, version 4.0
[ 50.650] (==) AIGLX enabled
[ 50.650] (II) Loading extension GLX
[ 50.651] (II) LoadModule: "record"
[ 50.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50.652] (II) Module record: vendor="X.Org Foundation"
[ 50.652] compiled for 1.9.2, module version = 1.13.0
[ 50.652] Module class: X.Org Server Extension
[ 50.652] ABI class: X.Org Server Extension, version 4.0
[ 50.652] (II) Loading extension RECORD
[ 50.652] (II) LoadModule: "dri"
[ 50.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.661] (II) Module dri: vendor="X.Org Foundation"
[ 50.661] compiled for 1.9.2, module version = 1.0.0
[ 50.661] ABI class: X.Org Server Extension, version 4.0
[ 50.661] (II) Loading extension XFree86-DRI
[ 50.661] (II) LoadModule: "dri2"
[ 50.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50.662] (II) Module dri2: vendor="X.Org Foundation"
[ 50.662] compiled for 1.9.2, module version = 1.2.0
[ 50.662] ABI class: X.Org Server Extension, version 4.0
[ 50.662] (II) Loading extension DRI2
[ 50.662] (II) LoadModule: "nouveau"
[ 50.662] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 50.675] (II) Module nouveau: vendor="X.Org Foundation"
[ 50.675] compiled for 1.9.0, module version = 0.0.16
[ 50.675] Module class: X.Org Video Driver
[ 50.675] ABI class: X.Org Video Driver, version 8.0
[ 50.675] (II) NOUVEAU driver
[ 50.675] (II) NOUVEAU driver for NVIDIA chipset families :
[ 50.675] RIVA TNT (NV04)
[ 50.675] RIVA TNT2 (NV05)
[ 50.675] GeForce 256 (NV10)
[ 50.675] GeForce 2 (NV11, NV15)
[ 50.675] GeForce 4MX (NV17, NV18)
[ 50.675] GeForce 3 (NV20)
[ 50.675] GeForce 4Ti (NV25, NV28)
[ 50.675] GeForce FX (NV3x)
[ 50.675] GeForce 6 (NV4x)
[ 50.675] GeForce 7 (G7x)
[ 50.675] GeForce 8 (G8x)
[ 50.675] (++) using VT number 7
[ 50.676] drmOpenDevice: node name is /dev/dri/card0
[ 50.676] drmOpenDevice: open result is 7, (OK)
[ 50.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 50.676] drmOpenDevice: node name is /dev/dri/card0
[ 50.676] drmOpenDevice: open result is 7, (OK)
[ 50.676] drmOpenByBusid: drmOpenMinor returns 7
[ 50.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 50.676] (II) [drm] nouveau interface version: 0.0.16
[ 50.676] (II) Loading sub module "dri"
[ 50.676] (II) LoadModule: "dri"
[ 50.677] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.677] (II) NOUVEAU(0): Loaded DRI module
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenByBusid: drmOpenMinor returns 8
[ 50.677] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 50.677] (II) [drm] DRM interface version 1.4
[ 50.677] (II) [drm] DRM open master succeeded.
[ 50.677] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
[ 50.677] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50.677] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 50.677] (==) NOUVEAU(0): RGB weight 888
[ 50.677] (==) NOUVEAU(0): Default visual is TrueColor
[ 50.677] (==) NOUVEAU(0): Using HW cursor
[ 50.696] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 50.794] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 50.803] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 50.804] (II) NOUVEAU(0): EDID for output LVDS-1
[ 50.804] (II) NOUVEAU(0): Manufacturer: SNY Model: 5fa Serial#: 0
[ 50.804] (II) NOUVEAU(0): Year: 2002 Week: 45
[ 50.804] (II) NOUVEAU(0): EDID Version: 1.4
[ 50.804] (II) NOUVEAU(0): Digital Display Input
[ 50.804] (II) NOUVEAU(0): 6 bits per channel
[ 50.804] (II) NOUVEAU(0): Digital interface is undefined
[ 50.804] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 50.804] (II) NOUVEAU(0): Gamma: 1.00
[ 50.804] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 50.804] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 50.804] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 50.804] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 50.804] (II) NOUVEAU(0): redX: 0.600 redY: 0.342 greenX: 0.295 greenY: 0.570
[ 50.804] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111 whiteX: 0.312 whiteY: 0.328
[ 50.804] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 50.804] (II) NOUVEAU(0): Supported detailed timing:
[ 50.804] (II) NOUVEAU(0): clock: 72.0 MHz Image Size: 309 x 174 mm
[ 50.804] (II) NOUVEAU(0): h_active: 1366 h_sync: 1424 h_sync_end 1482 h_blank_end 1540 h_border: 0
[ 50.804] (II) NOUVEAU(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0
[ 50.804] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
[ 50.804] (II) NOUVEAU(0): Monitor name: t Flat Panel
[ 50.804] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 47 kHz, PixClock max 85 MHz
[ 50.804] (II) NOUVEAU(0): EDID (in hex):
[ 50.804] (II) NOUVEAU(0): 00ffffffffffff004dd9fa0500000000
[ 50.804] (II) NOUVEAU(0): 2d0c0104901f1100eaa8e099574b9225
[ 50.804] (II) NOUVEAU(0): 1c505400000001010101010101010101
[ 50.804] (II) NOUVEAU(0): 010101010101201c56ae50000c303a3a
[ 50.804] (II) NOUVEAU(0): 440035ae10000018000000fc004e7669
[ 50.804] (II) NOUVEAU(0): 6469612044656661756c000000fc0074
[ 50.804] (II) NOUVEAU(0): 20466c61742050616e656c00000000fd
[ 50.804] (II) NOUVEAU(0): 00003d1d2f0800002020202020000003
[ 50.804] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[ 50.804] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 50.804] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 50.804] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.804] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 50.903] (II) NOUVEAU(0): EDID for output VGA-1
[ 50.912] (II) NOUVEAU(0): EDID for output HDMI-1
[ 50.912] (II) NOUVEAU(0): Output LVDS-1 connected
[ 50.912] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 50.912] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 50.912] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 50.912] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
[ 50.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 50.912] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 1376)
[ 50.912] (**) NOUVEAU(0): Driver mode "1366x768": 72.0 MHz (scaled from 0.0 MHz), 46.8 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 50.912] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
[ 50.912] (**) NOUVEAU(0): DPI set to (111, 114)
[ 50.912] (II) Loading sub module "wfb"
[ 50.912] (II) LoadModule: "wfb"
[ 50.912] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 50.972] (II) Module wfb: vendor="X.Org Foundation"
[ 50.972] compiled for 1.9.2, module version = 1.0.0
[ 50.972] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.972] (II) Loading sub module "fb"
[ 50.972] (II) LoadModule: "fb"
[ 50.972] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 50.992] (II) Module fb: vendor="X.Org Foundation"
[ 50.992] compiled for 1.9.2, module version = 1.0.0
[ 50.992] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.992] (II) Loading sub module "exa"
[ 50.992] (II) LoadModule: "exa"
[ 50.992] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 50.993] (II) Module exa: vendor="X.Org Foundation"
[ 50.993] compiled for 1.9.2, module version = 2.5.0
[ 50.993] ABI class: X.Org Video Driver, version 8.0
[ 50.993] (II) Loading sub module "shadowfb"
[ 50.993] (II) LoadModule: "shadowfb"
[ 50.994] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 50.994] (II) Module shadowfb: vendor="X.Org Foundation"
[ 50.994] compiled for 1.9.2, module version = 1.0.0
[ 50.994] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.994] (--) Depth 24 pixmap format is 32 bpp
[ 50.999] (II) NOUVEAU(0): Opened GPU channel 2
[ 50.999] (II) NOUVEAU(0): [DRI2] Setup complete
[ 50.999] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 50.999] (II) NOUVEAU(0): GART: 512MiB available
[ 51.001] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 51.027] (II) EXA(0): Driver allocated offscreen pixmaps
[ 51.027] (II) EXA(0): Driver registered support for the following operations:
[ 51.027] (II) Solid
[ 51.027] (II) Copy
[ 51.027] (II) Composite (RENDER acceleration)
[ 51.027] (II) UploadToScreen
[ 51.027] (II) DownloadFromScreen
[ 51.027] (==) NOUVEAU(0): Backing store disabled
[ 51.027] (==) NOUVEAU(0): Silken mouse enabled
[ 51.029] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 51.029] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 51.029] (==) NOUVEAU(0): DPMS enabled
[ 51.029] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 51.029] (--) RandR disabled
[ 51.029] (II) Initializing built-in extension Generic Event Extension
[ 51.029] (II) Initializing built-in extension SHAPE
[ 51.029] (II) Initializing built-in extension MIT-SHM
[ 51.029] (II) Initializing built-in extension XInputExtension
[ 51.029] (II) Initializing built-in extension XTEST
[ 51.029] (II) Initializing built-in extension BIG-REQUESTS
[ 51.029] (II) Initializing built-in extension SYNC
[ 51.029] (II) Initializing built-in extension XKEYBOARD
[ 51.029] (II) Initializing built-in extension XC-MISC
[ 51.029] (II) Initializing built-in extension SECURITY
[ 51.029] (II) Initializing built-in extension XINERAMA
[ 51.029] (II) Initializing built-in extension XFIXES
[ 51.029] (II) Initializing built-in extension RENDER
[ 51.029] (II) Initializing built-in extension RANDR
[ 51.029] (II) Initializing built-in extension COMPOSITE
[ 51.029] (II) Initializing built-in extension DAMAGE
[ 51.225] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 51.225] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 51.225] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 51.225] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 51.225] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
[ 51.225] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 51.227] (II) NOUVEAU(0): NVEnterVT is called.
[ 51.245] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
[ 51.245] resize called 1366 768
[ 51.660] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
[ 51.660] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 51.660] (II) LoadModule: "evdev"
[ 51.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 51.676] (II) Module evdev: vendor="X.Org Foundation"
[ 51.676] compiled for 1.9.0, module version = 2.5.0
[ 51.676] Module class: X.Org XInput Driver
[ 51.676] ABI class: X.Org XInput driver, version 11.0
[ 51.676] (**) Sony Vaio Keys: always reports core events
[ 51.676] (**) Sony Vaio Keys: Device: "/dev/input/event5"
[ 51.700] (--) Sony Vaio Keys: Found keys
[ 51.700] (II) Sony Vaio Keys: Configuring as keyboard
[ 51.700] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[ 51.700] (**) Option "xkb_rules" "evdev"
[ 51.700] (**) Option "xkb_model" "evdev"
[ 51.700] (**) Option "xkb_layout" "us"
[ 51.723] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 51.723] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 51.723] (**) Video Bus: always reports core events
[ 51.723] (**) Video Bus: Device: "/dev/input/event4"
[ 51.726] (--) Video Bus: Found keys
[ 51.726] (II) Video Bus: Configuring as keyboard
[ 51.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 51.726] (**) Option "xkb_rules" "evdev"
[ 51.726] (**) Option "xkb_model" "evdev"
[ 51.726] (**) Option "xkb_layout" "us"
[ 51.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 51.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 51.743] (**) Power Button: always reports core events
[ 51.743] (**) Power Button: Device: "/dev/input/event2"
[ 51.756] (--) Power Button: Found keys
[ 51.756] (II) Power Button: Configuring as keyboard
[ 51.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 51.756] (**) Option "xkb_rules" "evdev"
[ 51.756] (**) Option "xkb_model" "evdev"
[ 51.756] (**) Option "xkb_layout" "us"
[ 51.757] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 51.757] (II) No input driver/identifier specified (ignoring)
[ 51.760] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event7)
[ 51.760] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
[ 51.760] (**) UVC Camera (05ca:18b5): always reports core events
[ 51.760] (**) UVC Camera (05ca:18b5): Device: "/dev/input/event7"
[ 51.783] (--) UVC Camera (05ca:18b5): Found keys
[ 51.783] (II) UVC Camera (05ca:18b5): Configuring as keyboard
[ 51.783] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD)
[ 51.783] (**) Option "xkb_rules" "evdev"
[ 51.783] (**) Option "xkb_model" "evdev"
[ 51.783] (**) Option "xkb_layout" "us"
[ 51.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 51.784] (II) No input driver/identifier specified (ignoring)
[ 51.786] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 51.786] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 51.786] (**) Logitech USB Receiver: always reports core events
[ 51.786] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[ 51.800] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 51.800] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 51.800] (--) Logitech USB Receiver: Found relative axes
[ 51.800] (--) Logitech USB Receiver: Found x and y relative axes
[ 51.800] (II) Logitech USB Receiver: Configuring as mouse
[ 51.800] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 51.800] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.800] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 51.800] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 51.800] (II) Logitech USB Receiver: initialized for relative axes.
[ 51.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
[ 51.800] (II) No input driver/identifier specified (ignoring)
[ 51.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 51.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 51.801] (**) Logitech USB Receiver: always reports core events
[ 51.801] (**) Logitech USB Receiver: Device: "/dev/input/event11"
[ 51.816] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 51.816] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 51.816] (--) Logitech USB Receiver: Found relative axes
[ 51.816] (--) Logitech USB Receiver: Found absolute axes
[ 51.816] (--) Logitech USB Receiver: Found keys
[ 51.816] (II) Logitech USB Receiver: Configuring as mouse
[ 51.816] (II) Logitech USB Receiver: Configuring as keyboard
[ 51.816] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 51.816] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.816] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 51.816] (**) Option "xkb_rules" "evdev"
[ 51.816] (**) Option "xkb_model" "evdev"
[ 51.816] (**) Option "xkb_layout" "us"
[ 51.816] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 51.817] (II) Logitech USB Receiver: initialized for absolute axes.
[ 51.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 51.821] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 51.821] (**) AT Translated Set 2 keyboard: always reports core events
[ 51.821] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 51.843] (--) AT Translated Set 2 keyboard: Found keys
[ 51.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 51.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 51.843] (**) Option "xkb_rules" "evdev"
[ 51.843] (**) Option "xkb_model" "evdev"
[ 51.843] (**) Option "xkb_layout" "us"
[ 51.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 51.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 51.843] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 51.844] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 51.856] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 51.856] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 51.856] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 51.856] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 51.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 51.857] (II) No input driver/identifier specified (ignoring)
[ 51.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 51.857] (II) No input driver/identifier specified (ignoring)
[ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
[ 51.858] (II) No input driver/identifier specified (ignoring)
[ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 51.858] (II) No input driver/identifier specified (ignoring)
[ 80.420] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[ 80.420] (II) NOUVEAU(0): Using hsync ranges from config file
[ 80.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 80.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.420] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
dmesg.log
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.841 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422803)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10111.72 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x0800-0x0803] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290907981.066:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-28 01:33:02 UTC (1290907982)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226256
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226255
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226252
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226251
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226241
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226214
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226213
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226212
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226211
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226210
EXT4-fs (sda5): 10 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[958]: starting version 164
fuse init (API version 7.15)
iTCO_vendor_support: vendor-support=0
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (55 C)
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (55 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2:I tried another fresh install to see if me installing GNOME before messed up anything. The same problem persists, I made another fresh install. I only did a net install with Arch Linux core and haven't yet installed xorg or anything yet (havent even synced pacman yet). Weirdly nouveau is already loaded, this is the output of dmesg,
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.164 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.92 BogoMIPS (lpj=8423880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.47 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x0800-0x0803] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290893788.056:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-27 21:36:28 UTC (1290893788)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[949]: starting version 164
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sony-laptop: Sony Notebook Control Driver v0.6.
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: AC Adapter [ADP1] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (56 C)
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input2
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
input: Sony Vaio Jogdial as /devices/virtual/input/input3
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (56 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
usb 1-2: new high speed USB device using ehci_hcd and address 2
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMI1 [io 0x0800-0xffff0803 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
usb 2-1: new high speed USB device using ehci_hcd and address 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
firewire_core: created device fw0: GUID 080046030321aebd, S400
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 7-1: new full speed USB device using uhci_hcd and address 2
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-agn-rs'
usbcore: registered new interface driver hiddev
usb 8-1: new full speed USB device using uhci_hcd and address 2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
scsi 4:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[TTM] Zone kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013bfac400
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6. Priority:-1 extents:1 across:2803304k
wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
wlan0: authenticated
wlan0: associate with 94:44:52:78:c1:98 (try 1)
wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
wlan0: associated
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.035 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.65 BogoMIPS (lpj=8423450)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.21 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791 -
I'm having some trouble with random kernel panics on a thinkpad T61. Sometimes they occur just after boot yet other times I can be using my laptop for hours with absolutely no problems before it decides to panic. I've attached a picture of the error message I get and the output of some commands I thought would be relevant.
My /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
MOD_AUTOLOAD="yes"
MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
# NETWORKING
# Should also be put in /etc/hosts
HOSTNAME="alasdair-laptop"
NETWORKS=(ethernet gp)
# DAEMONS
DAEMONS=(syslog-ng acpid @net-profiles netfs crond @alsa)
Here's my dmesg, taken just after booting.
Linux version 2.6.25-ARCH (root@workstation64) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data)
BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS)
BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1118MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6900] 000f6900
Entering add_active_range(0, 0, 515760) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 515760
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 515760
On node 0 totalpages: 515760
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2237 pages used for memmap
HighMem zone: 284147 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
ACPI: XSDT 7DEBB77F, 0094 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: FACP 7DEBB900, 00F4 (r3 LENOVO TP-7L 2170 LNVO 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT 7DEBBD1D, FED1 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: FACS 7DEE4000, 0040
ACPI: SSDT 7DEBBAB4, 0269 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: ECDT 7DECBBEE, 0052 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: TCPA 7DECBC40, 0032 (r2 LENOVO TP-7L 2170 LNVO 1)
ACPI: APIC 7DECBC72, 0068 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: MCFG 7DECBCDA, 003C (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: HPET 7DECBD16, 0038 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L 2170 LTP 1)
ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L 2170 PTL 1)
ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511731
Kernel command line: root=/dev/disk/by-uuid/bf262041-d9e8-494d-becc-808ef613eef2 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2094.737 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2040240k/2063040k available (2083k kernel code, 21556k reserved, 711k data, 268k init, 1145536k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03c1000 - 0xc0404000 ( 268 kB)
.data : 0xc0308fe8 - 0xc03baea0 ( 711 kB)
.text : 0xc0100000 - 0xc0308fe8 (2083 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4197.54 BogoMIPS (lpj=6992869)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4191.12 BogoMIPS (lpj=6982598)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Total of 2 processors activated (8388.66 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 1229046 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to: check_tsc_sync_source failed.
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff has been reserved
system 00:00: iomem range 0xe4000-0xe7fff has been reserved
system 00:00: iomem range 0xe8000-0xebfff has been reserved
system 00:00: iomem range 0xec000-0xeffff has been reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xd4000000-0xd6ffffff
PREFETCH window: 0x00000000e0000000-0x00000000efffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: 0xfc000000-0xfdffffff
PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: 0xdc100000-0xdf2fffff
PREFETCH window: 0x00000000dfd00000-0x00000000dfdfffff
PCI: Bridge: 0000:00:1c.2
IO window: 5000-5fff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: 0x00000000dfa00000-0x00000000dfafffff
PCI: Bridge: 0000:00:1c.3
IO window: 6000-6fff
MEM window: 0xd0000000-0xd1ffffff
PREFETCH window: 0x00000000df700000-0x00000000df7fffff
PCI: Bridge: 0000:00:1c.4
IO window: 7000-7fff
MEM window: 0xcc000000-0xcdffffff
PREFETCH window: 0x00000000df400000-0x00000000df4fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
IO window: 0x00008000-0x000080ff
IO window: 0x00008400-0x000084ff
PREFETCH window: 0xf4000000-0xf7ffffff
MEM window: 0x80000000-0x83ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 8000-bfff
MEM window: 0xf8100000-0xfbffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 554k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 16
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata4.00: ATAPI: Optiarc DVD RW AD-7910A, 1.D1, max UDMA/33
ata4.00: configured for UDMA/33
ata5: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7910A 1.D1 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d6:46:39
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 4, PHY: 6, PBA No: 1008ff-0ff
ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7DEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7DEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (52 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [THM1] (42 C)
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.19
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
input: ThinkPad Extra Buttons as /class/input/input5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: WMI: Mapper loaded
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: device:03 is registered as cooling_device2
input: Video Bus as /class/input/input6
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: device:08 is registered as cooling_device3
input: Video Bus as /class/input/input7
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
usb 3-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 3-0:1.0: unable to enumerate USB device on port 1
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
hub 6-0:1.0: unable to enumerate USB device on port 2
usb 1-2: USB disconnect, address 2
input: PC Speaker as /class/input/input8
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:15:00.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:15:00.1 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4]
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
usb 7-1: new high speed USB device using ehci_hcd and address 2
Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
cs: IO port probe 0x8000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input9
usb 7-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Monitor-Mwait will be used to enter C-3 state
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a26dd3a]
EXT3 FS on sda3, internal journal
Adding 891596k swap on /dev/sda4. Priority:-1 extents:1 across:891596k
Clocksource tsc unstable (delta = -297926941 ns)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
scsi 5:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input10
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: RX authentication from 00:1f:5b:88:6f:1f (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1f:5b:88:6f:1f
wlan0: RX AssocResp from 00:1f:5b:88:6f:1f (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1f:5b:88:6f:1f)
wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
padlock: VIA PadLock not detected.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sdb.
usb 7-1: USB disconnect, address 2
usb 7-2: new high speed USB device using ehci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
lsmod
Module Size Used by
nls_cp437 5888 1
vfat 10880 1
fat 45984 1 vfat
aes_i586 8064 1
aes_generic 27432 1 aes_i586
usb_storage 84800 1
joydev 10048 0
pcmcia 33068 0
firewire_ohci 16512 0
firewire_core 36928 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
arc4 2176 2
ecb 3072 2
ohci1394 28720 0
serio_raw 5508 0
yenta_socket 23436 1
rsrc_nonstatic 11264 1 yenta_socket
ieee1394 79288 1 ohci1394
pcmcia_core 33300 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 2816 0
psmouse 36752 0
i2c_i801 9232 0
i2c_core 19348 1 i2c_i801
iwl4965 101748 0
mac80211 130572 1 iwl4965
cfg80211 16392 1 mac80211
video 16656 0
output 3200 1 video
ehci_hcd 33932 0
bay 4736 0
wmi 6056 0
uhci_hcd 22288 0
usbcore 129904 4 usb_storage,ehci_hcd,uhci_hcd
intel_agp 23740 0
agpgart 28244 1 intel_agp
sg 27188 0
thinkpad_acpi 53624 0
nvram 7436 1 thinkpad_acpi
thermal 15260 0
processor 32096 3 thermal
evdev 9472 0
fan 4356 0
button 6416 0
battery 10372 0
ac 4484 0
snd_seq_oss 30336 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 48560 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_hda_intel 336440 0
snd_hwdep 7428 1 snd_hda_intel
snd_pcm_oss 38656 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_timer 19848 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14848 1 snd_pcm_oss
snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
e1000e 90916 0
rtc_cmos 9120 0
rtc_core 15516 1 rtc_cmos
rtc_lib 2944 1 rtc_core
ext3 124040 1
jbd 44052 1 ext3
mbcache 7172 1 ext3
sd_mod 23320 5
sr_mod 15300 0
cdrom 34080 1 sr_mod
ata_piix 17668 0
ahci 25224 2
ata_generic 5636 0
pata_acpi 4992 0
libata 142224 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 92332 5 usb_storage,sg,sd_mod,sr_mod,libata
dock 7952 2 bay,libata
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)Sorry to ressurect an old thread, but recently I've been getting random kernel panics on my t61 as well. I believe the root cause is the wireless card. I have an intel 4965 card just like you.
-
Hi there.
Yesterday about at the same time I had a first kernel panic about 1-2 min after gnome loaded (my caps-lock and scroll-lock blinked).
Today during the boot I had a kernel panic after the line "Doing something with ACPI" - there was a long message and after 30 (60?) seconds the pc rebooted. I dug all the logs I have and couldn't fine anything related, if you could point me to a specific log to look at would be nice.
Last updates:
[2010-02-01 21:29] synchronizing package lists
[2010-02-01 21:29] starting full system upgrade
[2010-02-01 21:30] removed firefox-branded (3.5.7-1)
[2010-02-01 21:30] synchronizing package lists
[2010-02-01 21:33] installed firefox (3.5.7-1)
[2010-02-01 21:34] synchronizing package lists
[2010-02-01 21:34] starting full system upgrade
[2010-02-01 21:37] upgraded bash (4.0.035-1 -> 4.1.002-1)
[2010-02-01 21:43] upgraded bash (4.1.002-1 -> 4.0.033-1)
[2010-02-01 21:45] upgraded bash (4.0.033-1 -> 4.1.002-1)
[2010-02-01 21:47] upgraded bash (4.1.002-1 -> 4.0.033-1)
[2010-02-01 22:04] installed automake (1.11.1-1)
uname -a
Linux werewolf 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
everything.log for today
Feb 4 08:32:49 werewolf syslog-ng[3239]: syslog-ng starting up; version='3.0.4'
Feb 4 08:32:49 werewolf kernel: Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
Feb 4 08:32:49 werewolf kernel: KERNEL supported cpus:
Feb 4 08:32:49 werewolf kernel: Intel GenuineIntel
Feb 4 08:32:49 werewolf kernel: AMD AuthenticAMD
Feb 4 08:32:49 werewolf kernel: NSC Geode by NSC
Feb 4 08:32:49 werewolf kernel: Cyrix CyrixInstead
Feb 4 08:32:49 werewolf kernel: Centaur CentaurHauls
Feb 4 08:32:49 werewolf kernel: Transmeta GenuineTMx86
Feb 4 08:32:49 werewolf kernel: Transmeta TransmetaCPU
Feb 4 08:32:49 werewolf kernel: UMC UMC UMC UMC
Feb 4 08:32:50 werewolf kernel: BIOS-provided physical RAM map:
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Feb 4 08:32:50 werewolf kernel: BIOS-e820: 00000000ffba0000 - 0000000100000000 (reserved)
Feb 4 08:32:50 werewolf kernel: DMI 2.3 present.
Feb 4 08:32:50 werewolf kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Feb 4 08:32:50 werewolf kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Feb 4 08:32:50 werewolf kernel: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
Feb 4 08:32:50 werewolf kernel: MTRR default type: uncachable
Feb 4 08:32:50 werewolf kernel: MTRR fixed ranges enabled:
Feb 4 08:32:50 werewolf kernel: 00000-9FFFF write-back
Feb 4 08:32:50 werewolf kernel: A0000-DFFFF uncachable
Feb 4 08:32:50 werewolf kernel: E0000-EFFFF write-through
Feb 4 08:32:50 werewolf kernel: F0000-FFFFF write-protect
Feb 4 08:32:50 werewolf kernel: MTRR variable ranges enabled:
Feb 4 08:32:50 werewolf kernel: 0 base 000000000 mask FC0000000 write-back
Feb 4 08:32:50 werewolf kernel: 1 disabled
Feb 4 08:32:50 werewolf kernel: 2 disabled
Feb 4 08:32:50 werewolf kernel: 3 disabled
Feb 4 08:32:50 werewolf kernel: 4 disabled
Feb 4 08:32:50 werewolf kernel: 5 disabled
Feb 4 08:32:50 werewolf kernel: 6 disabled
Feb 4 08:32:50 werewolf kernel: 7 disabled
Feb 4 08:32:50 werewolf kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Feb 4 08:32:50 werewolf kernel: Scanning 0 areas for low memory corruption
Feb 4 08:32:50 werewolf kernel: modified physical RAM map:
Feb 4 08:32:50 werewolf kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
Feb 4 08:32:50 werewolf kernel: modified: 0000000000010000 - 000000000009fc00 (usable)
Feb 4 08:32:50 werewolf kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 4 08:32:50 werewolf kernel: modified: 00000000000e0000 - 0000000000100000 (reserved)
Feb 4 08:32:50 werewolf kernel: modified: 0000000000100000 - 000000003ffb0000 (usable)
Feb 4 08:32:50 werewolf kernel: modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
Feb 4 08:32:50 werewolf kernel: modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
Feb 4 08:32:50 werewolf kernel: modified: 000000003fff0000 - 0000000040000000 (reserved)
Feb 4 08:32:50 werewolf kernel: modified: 00000000ffba0000 - 0000000100000000 (reserved)
Feb 4 08:32:50 werewolf kernel: initial memory mapped : 0 - 01800000
Feb 4 08:32:50 werewolf kernel: init_memory_mapping: 0000000000000000-00000000377fe000
Feb 4 08:32:50 werewolf kernel: 0000000000 - 0000400000 page 4k
Feb 4 08:32:50 werewolf kernel: 0000400000 - 0037400000 page 2M
Feb 4 08:32:50 werewolf kernel: 0037400000 - 00377fe000 page 4k
Feb 4 08:32:50 werewolf kernel: kernel direct mapping tables up to 377fe000 @ 10000-15000
Feb 4 08:32:50 werewolf kernel: RAMDISK: 3ff00000 - 3ff9fae9
Feb 4 08:32:50 werewolf kernel: Allocated new RAMDISK: 00100000 - 0019fae9
Feb 4 08:32:50 werewolf kernel: Move RAMDISK from 000000003ff00000 - 000000003ff9fae8 to 00100000 - 0019fae8
Feb 4 08:32:50 werewolf kernel: ACPI: RSDP 000fac50 00014 (v00 ACPIAM)
Feb 4 08:32:50 werewolf kernel: ACPI: RSDT 3ffb0000 00030 (v01 A M I OEMRSDT 05000529 MSFT 00000097)
Feb 4 08:32:50 werewolf kernel: ACPI: FACP 3ffb0200 00081 (v02 A M I OEMFACP 05000529 MSFT 00000097)
Feb 4 08:32:50 werewolf kernel: ACPI: DSDT 3ffb03f0 03864 (v01 A0165 A0165011 00000011 INTL 02002026)
Feb 4 08:32:50 werewolf kernel: ACPI: FACS 3ffc0000 00040
Feb 4 08:32:50 werewolf kernel: ACPI: APIC 3ffb0390 0005C (v01 A M I OEMAPIC 05000529 MSFT 00000097)
Feb 4 08:32:50 werewolf kernel: ACPI: OEMB 3ffc0040 0003F (v01 A M I OEMBIOS 05000529 MSFT 00000097)
Feb 4 08:32:50 werewolf kernel: ACPI: Local APIC address 0xfee00000
Feb 4 08:32:50 werewolf kernel: 135MB HIGHMEM available.
Feb 4 08:32:50 werewolf kernel: 887MB LOWMEM available.
Feb 4 08:32:50 werewolf kernel: mapped low ram: 0 - 377fe000
Feb 4 08:32:50 werewolf kernel: low ram: 0 - 377fe000
Feb 4 08:32:50 werewolf kernel: node 0 low ram: 00000000 - 377fe000
Feb 4 08:32:50 werewolf kernel: node 0 bootmap 00011000 - 00017f00
Feb 4 08:32:50 werewolf kernel: (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Feb 4 08:32:50 werewolf kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Feb 4 08:32:50 werewolf kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Feb 4 08:32:50 werewolf kernel: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Feb 4 08:32:50 werewolf kernel: #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
Feb 4 08:32:50 werewolf kernel: #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
Feb 4 08:32:50 werewolf kernel: #5 [000156e000 - 0001574228] BRK ==> [000156e000 - 0001574228]
Feb 4 08:32:50 werewolf kernel: #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
Feb 4 08:32:50 werewolf kernel: #7 [0000100000 - 000019fae9] NEW RAMDISK ==> [0000100000 - 000019fae9]
Feb 4 08:32:50 werewolf kernel: #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
Feb 4 08:32:50 werewolf kernel: found SMP MP-table at [c00ff780] ff780
Feb 4 08:32:50 werewolf kernel: Zone PFN ranges:
Feb 4 08:32:50 werewolf kernel: DMA 0x00000010 -> 0x00001000
Feb 4 08:32:50 werewolf kernel: Normal 0x00001000 -> 0x000377fe
Feb 4 08:32:50 werewolf kernel: HighMem 0x000377fe -> 0x0003ffb0
Feb 4 08:32:50 werewolf kernel: Movable zone start PFN for each node
Feb 4 08:32:50 werewolf kernel: early_node_map[2] active PFN ranges
Feb 4 08:32:50 werewolf kernel: 0: 0x00000010 -> 0x0000009f
Feb 4 08:32:50 werewolf kernel: 0: 0x00000100 -> 0x0003ffb0
Feb 4 08:32:50 werewolf kernel: On node 0 totalpages: 261951
Feb 4 08:32:50 werewolf kernel: free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575200
Feb 4 08:32:50 werewolf kernel: DMA zone: 32 pages used for memmap
Feb 4 08:32:50 werewolf kernel: DMA zone: 0 pages reserved
Feb 4 08:32:50 werewolf kernel: DMA zone: 3951 pages, LIFO batch:0
Feb 4 08:32:50 werewolf kernel: Normal zone: 1744 pages used for memmap
Feb 4 08:32:50 werewolf kernel: Normal zone: 221486 pages, LIFO batch:31
Feb 4 08:32:50 werewolf kernel: HighMem zone: 272 pages used for memmap
Feb 4 08:32:50 werewolf kernel: HighMem zone: 34466 pages, LIFO batch:7
Feb 4 08:32:50 werewolf kernel: Using APIC driver default
Feb 4 08:32:50 werewolf kernel: ACPI: PM-Timer IO Port: 0x808
Feb 4 08:32:50 werewolf kernel: ACPI: Local APIC address 0xfee00000
Feb 4 08:32:50 werewolf kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 4 08:32:50 werewolf kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Feb 4 08:32:50 werewolf kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Feb 4 08:32:50 werewolf kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Feb 4 08:32:50 werewolf kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 4 08:32:50 werewolf kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 4 08:32:50 werewolf kernel: ACPI: IRQ0 used by override.
Feb 4 08:32:50 werewolf kernel: ACPI: IRQ2 used by override.
Feb 4 08:32:50 werewolf kernel: ACPI: IRQ9 used by override.
Feb 4 08:32:50 werewolf kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 4 08:32:50 werewolf kernel: Using ACPI (MADT) for SMP configuration information
Feb 4 08:32:50 werewolf kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Feb 4 08:32:50 werewolf kernel: nr_irqs_gsi: 24
Feb 4 08:32:50 werewolf kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 4 08:32:50 werewolf kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Feb 4 08:32:50 werewolf kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Feb 4 08:32:50 werewolf kernel: Allocating PCI resources starting at 40000000 (gap: 40000000:bfba0000)
Feb 4 08:32:50 werewolf kernel: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Feb 4 08:32:50 werewolf kernel: PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
Feb 4 08:32:50 werewolf kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259903
Feb 4 08:32:50 werewolf kernel: Kernel command line: root=/dev/disk/by-uuid/4733c52b-9f33-47c5-aa40-7deb3c9ff6b3 ro vga=773
Feb 4 08:32:50 werewolf kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 4 08:32:50 werewolf kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 4 08:32:50 werewolf kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 4 08:32:50 werewolf kernel: Enabling fast FPU save and restore... done.
Feb 4 08:32:50 werewolf kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 4 08:32:50 werewolf kernel: Initializing CPU#0
Feb 4 08:32:50 werewolf kernel: Initializing HighMem for node 0 (000377fe:0003ffb0)
Feb 4 08:32:50 werewolf kernel: Memory: 1032144k/1048256k available (3111k kernel code, 15364k reserved, 1120k data, 416k init, 138952k highmem)
Feb 4 08:32:50 werewolf kernel: virtual kernel memory layout:
Feb 4 08:32:50 werewolf kernel: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
Feb 4 08:32:50 werewolf kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 4 08:32:50 werewolf kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Feb 4 08:32:50 werewolf kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Feb 4 08:32:50 werewolf kernel: .init : 0xc1422000 - 0xc148a000 ( 416 kB)
Feb 4 08:32:50 werewolf kernel: .data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
Feb 4 08:32:50 werewolf kernel: .text : 0xc1000000 - 0xc1309ddd (3111 kB)
Feb 4 08:32:50 werewolf kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 4 08:32:50 werewolf kernel: SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Feb 4 08:32:50 werewolf kernel: NR_IRQS:512
Feb 4 08:32:50 werewolf kernel: Fast TSC calibration using PIT
Feb 4 08:32:50 werewolf kernel: Detected 2998.577 MHz processor.
Feb 4 08:32:50 werewolf kernel: Console: colour dummy device 80x25
Feb 4 08:32:50 werewolf kernel: console [tty0] enabled
Feb 4 08:32:50 werewolf kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.03 BogoMIPS (lpj=9995256)
Feb 4 08:32:50 werewolf kernel: Security Framework initialized
Feb 4 08:32:50 werewolf kernel: Mount-cache hash table entries: 512
Feb 4 08:32:50 werewolf kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Feb 4 08:32:50 werewolf kernel: CPU: L2 cache: 2048K
Feb 4 08:32:50 werewolf kernel: CPU: Physical Processor ID: 0
Feb 4 08:32:50 werewolf kernel: CPU: Processor Core ID: 0
Feb 4 08:32:50 werewolf kernel: mce: CPU supports 4 MCE banks
Feb 4 08:32:50 werewolf kernel: Disabling lock debugging due to kernel taint
Feb 4 08:32:50 werewolf kernel: CPU0: Thermal monitoring enabled (TM1)
Feb 4 08:32:50 werewolf kernel: using mwait in idle threads.
Feb 4 08:32:50 werewolf kernel: Performance Counters: no PMU driver, software counters only.
Feb 4 08:32:50 werewolf kernel: Checking 'hlt' instruction... OK.
Feb 4 08:32:50 werewolf kernel: ACPI: Core revision 20090521
Feb 4 08:32:50 werewolf kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 4 08:32:50 werewolf kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Feb 4 08:32:50 werewolf kernel: APIC calibration not consistent with PM-Timer: 313ms instead of 100ms
Feb 4 08:32:50 werewolf kernel: APIC delta adjusted to PM-Timer: 1249396 (3914523)
Feb 4 08:32:50 werewolf kernel: Booting processor 1 APIC 0x1 ip 0x6000
Feb 4 08:32:50 werewolf kernel: Initializing CPU#1
Feb 4 08:32:50 werewolf kernel: Calibrating delay using timer specific routine.. 5999.95 BogoMIPS (lpj=9995124)
Feb 4 08:32:50 werewolf kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Feb 4 08:32:50 werewolf kernel: CPU: L2 cache: 2048K
Feb 4 08:32:50 werewolf kernel: CPU: Physical Processor ID: 0
Feb 4 08:32:50 werewolf kernel: CPU: Processor Core ID: 0
Feb 4 08:32:50 werewolf kernel: mce: CPU supports 4 MCE banks
Feb 4 08:32:50 werewolf kernel: CPU1: Thermal monitoring enabled (TM1)
Feb 4 08:32:50 werewolf kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Feb 4 08:32:50 werewolf kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Feb 4 08:32:50 werewolf kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Feb 4 08:32:50 werewolf kernel: Brought up 2 CPUs
Feb 4 08:32:50 werewolf kernel: Total of 2 processors activated (11999.98 BogoMIPS).
Feb 4 08:32:50 werewolf kernel: CPU0 attaching sched-domain:
Feb 4 08:32:50 werewolf kernel: domain 0: span 0-1 level SIBLING
Feb 4 08:32:50 werewolf kernel: groups: 0 1
Feb 4 08:32:50 werewolf kernel: CPU1 attaching sched-domain:
Feb 4 08:32:50 werewolf kernel: domain 0: span 0-1 level SIBLING
Feb 4 08:32:50 werewolf kernel: groups: 1 0
Feb 4 08:32:50 werewolf kernel: Booting paravirtualized kernel on bare hardware
Feb 4 08:32:50 werewolf kernel: NET: Registered protocol family 16
Feb 4 08:32:50 werewolf kernel: ACPI: bus type pci registered
Feb 4 08:32:50 werewolf kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Feb 4 08:32:50 werewolf kernel: PCI: Using configuration type 1 for base access
Feb 4 08:32:50 werewolf kernel: bio: create slab <bio-0> at 0
Feb 4 08:32:50 werewolf kernel: ACPI: EC: Look up EC in DSDT
Feb 4 08:32:50 werewolf kernel: ACPI: Interpreter enabled
Feb 4 08:32:50 werewolf kernel: ACPI: (supports S0 S1 S3 S4 S5)
Feb 4 08:32:50 werewolf kernel: ACPI: Using IOAPIC for interrupt routing
Feb 4 08:32:50 werewolf kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 08, should be FB 20090521 tbutils-246
Feb 4 08:32:50 werewolf kernel: ACPI: No dock devices found.
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 4 08:32:50 werewolf kernel: pci 0000:00:00.0: Enabling MCH 'Overflow' Device
Feb 4 08:32:50 werewolf kernel: pci 0000:00:00.0: reg 10 32bit mmio: [0xdc000000-0xdfffffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.1: reg 20 io port: [0xc800-0xc81f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.2: reg 20 io port: [0xc880-0xc89f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.3: reg 20 io port: [0xcc00-0xcc1f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8fffc00-0xf8ffffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1d.7: PME# disabled
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.5: reg 10 io port: [0xc000-0xc0ff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.5: reg 14 io port: [0xc400-0xc43f]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.5: reg 18 32bit mmio: [0xf8fff800-0xf8fff9ff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf8fff400-0xf8fff4ff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1f.5: PME# disabled
Feb 4 08:32:50 werewolf kernel: pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:01:00.0: reg 30 32bit mmio: [0xfbee0000-0xfbefffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: bridge 32bit mmio: [0xf9000000-0xfbefffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xf7ffffff]
Feb 4 08:32:50 werewolf kernel: pci 0000:02:05.0: reg 10 io port: [0xe800-0xe8ff]
Feb 4 08:32:50 werewolf kernel: pci 0000:02:05.0: reg 14 32bit mmio: [0xfbfffc00-0xfbfffcff]
Feb 4 08:32:50 werewolf kernel: pci 0000:02:05.0: supports D1 D2
Feb 4 08:32:50 werewolf kernel: pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
Feb 4 08:32:50 werewolf kernel: pci 0000:02:05.0: PME# disabled
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: transparent bridge
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:00: on NUMA node 0
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Feb 4 08:32:50 werewolf kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Feb 4 08:32:50 werewolf kernel: PCI: Using ACPI for IRQ routing
Feb 4 08:32:50 werewolf kernel: NetLabel: Initializing
Feb 4 08:32:50 werewolf kernel: NetLabel: domain hash size = 128
Feb 4 08:32:50 werewolf kernel: NetLabel: protocols = UNLABELED CIPSOv4
Feb 4 08:32:50 werewolf kernel: NetLabel: unlabeled traffic allowed by default
Feb 4 08:32:50 werewolf kernel: hpet clockevent registered
Feb 4 08:32:50 werewolf kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Feb 4 08:32:50 werewolf kernel: pnp: PnP ACPI init
Feb 4 08:32:50 werewolf kernel: ACPI: bus type pnp registered
Feb 4 08:32:50 werewolf kernel: pnp: PnP ACPI: found 13 devices
Feb 4 08:32:50 werewolf kernel: ACPI: ACPI bus type pnp unregistered
Feb 4 08:32:50 werewolf kernel: system 00:09: ioport range 0x290-0x297 has been reserved
Feb 4 08:32:50 werewolf kernel: system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
Feb 4 08:32:50 werewolf kernel: system 00:0a: ioport range 0x800-0x87f has been reserved
Feb 4 08:32:50 werewolf kernel: system 00:0a: ioport range 0x480-0x4bf has been reserved
Feb 4 08:32:50 werewolf kernel: system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
Feb 4 08:32:50 werewolf kernel: system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
Feb 4 08:32:50 werewolf kernel: system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
Feb 4 08:32:50 werewolf kernel: system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
Feb 4 08:32:50 werewolf kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Feb 4 08:32:50 werewolf kernel: system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Feb 4 08:32:50 werewolf kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Feb 4 08:32:50 werewolf kernel: system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
Feb 4 08:32:50 werewolf kernel: system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: IO window: 0xd000-0xdfff
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: MEM window: 0xf9000000-0xfbefffff
Feb 4 08:32:50 werewolf kernel: pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xf7ffffff
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: IO window: 0xe000-0xefff
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: PREFETCH window: disabled
Feb 4 08:32:50 werewolf kernel: pci 0000:00:1e.0: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:01: resource 1 mem: [0xf9000000-0xfbefffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf7ffffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:02: resource 3 io: [0x00-0xffff]
Feb 4 08:32:50 werewolf kernel: pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
Feb 4 08:32:50 werewolf kernel: NET: Registered protocol family 2
Feb 4 08:32:50 werewolf kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 4 08:32:50 werewolf kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 4 08:32:50 werewolf kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 4 08:32:50 werewolf kernel: TCP: Hash tables configured (established 131072 bind 65536)
Feb 4 08:32:50 werewolf kernel: TCP reno registered
Feb 4 08:32:50 werewolf kernel: NET: Registered protocol family 1
Feb 4 08:32:50 werewolf kernel: Unpacking initramfs...
Feb 4 08:32:50 werewolf kernel: Freeing initrd memory: 638k freed
Feb 4 08:32:50 werewolf kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Feb 4 08:32:50 werewolf kernel: apm: disabled - APM is not SMP safe.
Feb 4 08:32:50 werewolf kernel: Scanning for low memory corruption every 60 seconds
Feb 4 08:32:50 werewolf kernel: audit: initializing netlink socket (disabled)
Feb 4 08:32:50 werewolf kernel: type=2000 audit(1265272359.270:1): initialized
Feb 4 08:32:50 werewolf kernel: highmem bounce pool size: 64 pages
Feb 4 08:32:50 werewolf kernel: VFS: Disk quotas dquot_6.5.2
Feb 4 08:32:50 werewolf kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 4 08:32:50 werewolf kernel: msgmni has been set to 1746
Feb 4 08:32:50 werewolf kernel: alg: No test for stdrng (krng)
Feb 4 08:32:50 werewolf kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Feb 4 08:32:50 werewolf kernel: io scheduler noop registered
Feb 4 08:32:50 werewolf kernel: io scheduler anticipatory registered
Feb 4 08:32:50 werewolf kernel: io scheduler deadline registered
Feb 4 08:32:50 werewolf kernel: io scheduler cfq registered (default)
Feb 4 08:32:50 werewolf kernel: pci 0000:01:00.0: Boot video device
Feb 4 08:32:50 werewolf kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1536k, total 262144k
Feb 4 08:32:50 werewolf kernel: vesafb: mode is 1024x768x8, linelength=1024, pages=3
Feb 4 08:32:50 werewolf kernel: vesafb: protected mode interface info at c000:d600
Feb 4 08:32:50 werewolf kernel: vesafb: pmi: set display start = c00cd636, set palette = c00cd6a0
Feb 4 08:32:50 werewolf kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Feb 4 08:32:50 werewolf kernel: vesafb: scrolling: redraw
Feb 4 08:32:50 werewolf kernel: vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Feb 4 08:32:50 werewolf kernel: Console: switching to colour frame buffer device 128x48
Feb 4 08:32:50 werewolf kernel: fb0: VESA VGA frame buffer device
Feb 4 08:32:50 werewolf kernel: isapnp: Scanning for PnP cards...
Feb 4 08:32:50 werewolf kernel: isapnp: No Plug & Play device found
Feb 4 08:32:50 werewolf kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Feb 4 08:32:50 werewolf kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 4 08:32:50 werewolf kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 4 08:32:50 werewolf kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Feb 4 08:32:50 werewolf kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Feb 4 08:32:50 werewolf kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Feb 4 08:32:50 werewolf kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 4 08:32:50 werewolf kernel: mice: PS/2 mouse device common for all mice
Feb 4 08:32:50 werewolf kernel: cpuidle: using governor ladder
Feb 4 08:32:50 werewolf kernel: cpuidle: using governor menu
Feb 4 08:32:50 werewolf kernel: TCP cubic registered
Feb 4 08:32:50 werewolf kernel: NET: Registered protocol family 17
Feb 4 08:32:50 werewolf kernel: Using IPI No-Shortcut mode
Feb 4 08:32:50 werewolf kernel: registered taskstats version 1
Feb 4 08:32:50 werewolf kernel: Initalizing network drop monitor service
Feb 4 08:32:50 werewolf kernel: Freeing unused kernel memory: 416k freed
Feb 4 08:32:50 werewolf kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Feb 4 08:32:50 werewolf kernel: Switched to high resolution mode on CPU 1
Feb 4 08:32:50 werewolf kernel: Switched to high resolution mode on CPU 0
Feb 4 08:32:50 werewolf kernel: SCSI subsystem initialized
Feb 4 08:32:50 werewolf kernel: libata version 3.00 loaded.
Feb 4 08:32:50 werewolf kernel: Floppy drive(s): fd0 is 1.44M
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.1: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.1: PCI INT A disabled
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.2: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: pata_acpi 0000:00:1f.2: PCI INT A disabled
Feb 4 08:32:50 werewolf kernel: ata_piix 0000:00:1f.1: version 2.13
Feb 4 08:32:50 werewolf kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 4 08:32:50 werewolf kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: scsi0 : ata_piix
Feb 4 08:32:50 werewolf kernel: scsi1 : ata_piix
Feb 4 08:32:50 werewolf kernel: FDC 0 is a post-1991 82077
Feb 4 08:32:50 werewolf kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Feb 4 08:32:50 werewolf kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Feb 4 08:32:50 werewolf kernel: ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 4 08:32:50 werewolf kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Feb 4 08:32:50 werewolf kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: scsi2 : ata_piix
Feb 4 08:32:50 werewolf kernel: scsi3 : ata_piix
Feb 4 08:32:50 werewolf kernel: ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 18
Feb 4 08:32:50 werewolf kernel: ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 18
Feb 4 08:32:50 werewolf kernel: ata1.00: ATA-7: ExcelStor Technology J880, PF2OA21B, max UDMA/133
Feb 4 08:32:50 werewolf kernel: ata1.00: 160836480 sectors, multi 16: LBA48
Feb 4 08:32:50 werewolf kernel: ata1.01: ATA-6: HDS722516VLAT80, V34OA6EA, max UDMA/100
Feb 4 08:32:50 werewolf kernel: ata1.01: 321672960 sectors, multi 16: LBA48
Feb 4 08:32:50 werewolf kernel: ata3.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
Feb 4 08:32:50 werewolf kernel: ata3.00: configured for UDMA/100
Feb 4 08:32:50 werewolf kernel: ata1.00: configured for UDMA/100
Feb 4 08:32:50 werewolf kernel: ata1.01: configured for UDMA/100
Feb 4 08:32:50 werewolf kernel: scsi 0:0:0:0: Direct-Access ATA ExcelStor Techno PF2O PQ: 0 ANSI: 5
Feb 4 08:32:50 werewolf kernel: scsi 0:0:1:0: Direct-Access ATA HDS722516VLAT80 V34O PQ: 0 ANSI: 5
Feb 4 08:32:50 werewolf kernel: scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
Feb 4 08:32:50 werewolf kernel: sd 0:0:0:0: [sda] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
Feb 4 08:32:50 werewolf kernel: sd 0:0:1:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB)
Feb 4 08:32:50 werewolf kernel: sd 0:0:1:0: [sdb] Write Protect is off
Feb 4 08:32:50 werewolf kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Feb 4 08:32:50 werewolf kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 08:32:50 werewolf kernel: sdb: sdb1 sdb2 sdb3 sdb4
Feb 4 08:32:50 werewolf kernel: sd 0:0:0:0: [sda] Write Protect is off
Feb 4 08:32:50 werewolf kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 08:32:50 werewolf kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 08:32:50 werewolf kernel: sda: sda1 sda2 < sda5 >
Feb 4 08:32:50 werewolf kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Feb 4 08:32:50 werewolf kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 4 08:32:50 werewolf kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 4 08:32:50 werewolf kernel: Uniform CD-ROM driver Revision: 3.20
Feb 4 08:32:50 werewolf kernel: sr 2:0:0:0: Attached scsi CD-ROM sr0
Feb 4 08:32:50 werewolf kernel: EXT3-fs: mounted filesystem with writeback data mode.
Feb 4 08:32:50 werewolf kernel: kjournald starting. Commit interval 5 seconds
Feb 4 08:32:50 werewolf kernel: rtc_cmos 00:02: RTC can wake from S4
Feb 4 08:32:50 werewolf kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Feb 4 08:32:50 werewolf kernel: rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Feb 4 08:32:50 werewolf kernel: udev: starting version 146
Feb 4 08:32:50 werewolf kernel: usbcore: registered new interface driver usbfs
Feb 4 08:32:50 werewolf kernel: usbcore: registered new interface driver hub
Feb 4 08:32:50 werewolf kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 4 08:32:50 werewolf kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Feb 4 08:32:50 werewolf kernel: sr 2:0:0:0: Attached scsi generic sg2 type 5
Feb 4 08:32:50 werewolf kernel: Linux agpgart interface v0.103
Feb 4 08:32:50 werewolf kernel: agpgart-intel 0000:00:00.0: Intel 865 Chipset
Feb 4 08:32:50 werewolf kernel: agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xdc000000
Feb 4 08:32:50 werewolf kernel: usbcore: registered new device driver usb
Feb 4 08:32:50 werewolf kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: debug port 1
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8fffc00
Feb 4 08:32:50 werewolf kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Feb 4 08:32:50 werewolf kernel: usb usb1: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: hub 1-0:1.0: USB hub found
Feb 4 08:32:50 werewolf kernel: hub 1-0:1.0: 8 ports detected
Feb 4 08:32:50 werewolf kernel: uhci_hcd: USB Universal Host Controller Interface driver
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
Feb 4 08:32:50 werewolf kernel: usb usb2: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: hub 2-0:1.0: USB hub found
Feb 4 08:32:50 werewolf kernel: hub 2-0:1.0: 2 ports detected
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
Feb 4 08:32:50 werewolf kernel: usb usb3: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: hub 3-0:1.0: USB hub found
Feb 4 08:32:50 werewolf kernel: hub 3-0:1.0: 2 ports detected
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
Feb 4 08:32:50 werewolf kernel: usb usb4: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: hub 4-0:1.0: USB hub found
Feb 4 08:32:50 werewolf kernel: hub 4-0:1.0: 2 ports detected
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Feb 4 08:32:50 werewolf kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
Feb 4 08:32:50 werewolf kernel: usb usb5: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: hub 5-0:1.0: USB hub found
Feb 4 08:32:50 werewolf kernel: hub 5-0:1.0: 2 ports detected
Feb 4 08:32:50 werewolf kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 4 08:32:50 werewolf kernel: intel_rng: FWH not detected
Feb 4 08:32:50 werewolf kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 4 08:32:50 werewolf kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Feb 4 08:32:50 werewolf kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 4 08:32:50 werewolf kernel: lp: driver loaded but no devices found
Feb 4 08:32:50 werewolf kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Feb 4 08:32:50 werewolf kernel: ACPI: Power Button [PWRF]
Feb 4 08:32:50 werewolf kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Feb 4 08:32:50 werewolf kernel: ACPI: Power Button [PWRB]
Feb 4 08:32:50 werewolf kernel: parport_pc 00:08: reported by Plug and Play ACPI
Feb 4 08:32:50 werewolf kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Feb 4 08:32:50 werewolf kernel: ACPI: SSDT 3ffb3c60 002FC (v01 AMI CPU1PM 00000001 INTL 02002026)
Feb 4 08:32:50 werewolf kernel: processor LNXCPU:00: registered as cooling_device0
Feb 4 08:32:50 werewolf kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Feb 4 08:32:50 werewolf kernel: ACPI Warning: Incorrect checksum in table [SSDT] - C5, should be E7 20090521 tbutils-246
Feb 4 08:32:50 werewolf kernel: ACPI: SSDT 3ffb3f60 002FC (v01 AMI CPU2PM 00000001 INTL 02002026)
Feb 4 08:32:50 werewolf kernel: processor LNXCPU:01: registered as cooling_device1
Feb 4 08:32:50 werewolf kernel: iTCO_vendor_support: vendor-support=0
Feb 4 08:32:50 werewolf kernel: lp0: using parport0 (interrupt-driven).
Feb 4 08:32:50 werewolf kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Feb 4 08:32:50 werewolf kernel: iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
Feb 4 08:32:50 werewolf kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 4 08:32:50 werewolf kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 4 08:32:50 werewolf kernel: Intel ICH 0000:00:1f.5: setting latency timer to 64
Feb 4 08:32:50 werewolf kernel: <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 4 08:32:50 werewolf kernel: 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Feb 4 08:32:50 werewolf kernel: ppdev: user-space parallel port driver
Feb 4 08:32:50 werewolf kernel: 8139too Fast Ethernet driver 0.9.28
Feb 4 08:32:50 werewolf kernel: 8139too 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 4 08:32:50 werewolf kernel: eth0: RealTek RTL8139 at 0xf857ac00, 00:11:d8:41:89:b6, IRQ 22
Feb 4 08:32:50 werewolf kernel: usb 3-2: new low speed USB device using uhci_hcd and address 2
Feb 4 08:32:50 werewolf kernel: intel8x0_measure_ac97_clock: measured 51251 usecs (2470 samples)
Feb 4 08:32:50 werewolf kernel: intel8x0: clocking to 48000
Feb 4 08:32:50 werewolf kernel: usb 3-2: configuration #1 chosen from 1 choice
Feb 4 08:32:50 werewolf kernel: nvidia: module license 'NVIDIA' taints kernel.
Feb 4 08:32:50 werewolf kernel: Linux video capture interface: v2.00
Feb 4 08:32:50 werewolf kernel: uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:332d)
Feb 4 08:32:50 werewolf kernel: input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input4
Feb 4 08:32:50 werewolf kernel: usbcore: registered new interface driver uvcvideo
Feb 4 08:32:50 werewolf kernel: USB Video Class driver (v0.1.0)
Feb 4 08:32:50 werewolf kernel: usbcore: registered new interface driver snd-usb-audio
Feb 4 08:32:50 werewolf kernel: usbcore: registered new interface driver hiddev
Feb 4 08:32:50 werewolf kernel: input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
Feb 4 08:32:50 werewolf kernel: generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.1-2/input0
Feb 4 08:32:50 werewolf kernel: usbcore: registered new interface driver usbhid
Feb 4 08:32:50 werewolf kernel: usbhid: v2.6:USB HID core driver
Feb 4 08:32:50 werewolf kernel: nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 4 08:32:50 werewolf kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module 190.42 Tue Oct 20 20:18:32 PDT 2009
Feb 4 08:32:50 werewolf kernel: EXT3 FS on sdb3, internal journal
Feb 4 08:32:50 werewolf kernel: kjournald starting. Commit interval 5 seconds
Feb 4 08:32:50 werewolf kernel: EXT3 FS on sdb4, internal journal
Feb 4 08:32:50 werewolf kernel: EXT3-fs: mounted filesystem with writeback data mode.
Feb 4 08:32:50 werewolf kernel: Adding 1132572k swap on /dev/sdb2. Priority:-1 extents:1 across:1132572k
Feb 4 08:32:50 werewolf kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Feb 4 08:32:43 werewolf load-modules.sh: Not loading module alias 'pcspkr' because it is blacklisted
Feb 4 08:32:43 werewolf load-modules.sh: 'acpi:LNXSYSTM:' is not a valid module or alias name
Feb 4 08:32:43 werewolf load-modules.sh: 'dmi:bvnAmericanMegatrendsInc.:bvr1004.001:bd05/29/2005:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASUSTeKComputerInc.:rnP5P800S:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'pci:v00008086d00002576sv00000000sd00000000bc08sc80i00' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0000:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: Not loading module 'pcspkr' for alias 'platform:pcspkr' because it is blacklisted
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0200:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0501:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0303:PNP030B:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0C04:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0800:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0100:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'platform:parport_pc' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'platform:parport_pc' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'platform:parport_pc' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'platform:iTCO_wdt' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'usb:v0AC8p332Dd0100dcEFdsc02dp01ic01isc02ip00' is not a valid module or alias name
Feb 4 08:32:44 werewolf load-modules.sh: 'usb:v0AC8p332Dd0100dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Feb 4 08:32:49 werewolf init: Entering runlevel: 3
Feb 4 08:32:57 werewolf kernel: NET: Registered protocol family 10
Feb 4 08:32:57 werewolf kernel: lo: Disabled Privacy Extensions
Feb 4 08:33:03 werewolf kernel: agpgart-intel 0000:00:00.0: AGP 3.0 bridge
Feb 4 08:33:03 werewolf kernel: agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
Feb 4 08:33:03 werewolf kernel: nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
Feb 4 08:33:06 werewolf kernel: CPU0 attaching NULL sched-domain.
Feb 4 08:33:06 werewolf kernel: CPU1 attaching NULL sched-domain.
Feb 4 08:33:06 werewolf kernel: CPU0 attaching sched-domain:
Feb 4 08:33:06 werewolf kernel: domain 0: span 0-1 level SIBLING
Feb 4 08:33:06 werewolf kernel: groups: 0 1
Feb 4 08:33:06 werewolf kernel: CPU1 attaching sched-domain:
Feb 4 08:33:06 werewolf kernel: domain 0: span 0-1 level SIBLING
Feb 4 08:33:06 werewolf kernel: groups: 1 0
Feb 4 08:33:08 werewolf gdm-simple-greeter[3554]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Feb 4 08:33:08 werewolf gdm-simple-greeter[3554]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Feb 4 08:33:08 werewolf kernel: eth0: no IPv6 routers present
Feb 4 08:33:09 werewolf gdm-simple-greeter[3554]: WARNING: Unable to read from file /etc/arch-release
Feb 4 08:33:09 werewolf gdm-simple-greeter[3554]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Feb 4 08:34:33 werewolf kernel: fuse init (API version 7.12)
Feb 4 08:37:38 werewolf kernel: Machine check events logged
Thanks for any help!
Last edited by skwo (2010-02-04 06:44:23)Ok one more update.
Kernel panic occurs only first time I boot the pc. I.E. I woke up today, turned the pc on and got kernel panic. No matter how much times Il reboot today, or even if I power down the pc it wont happen anymore. Next panic will be tomorrow after Ill turn the pc (after night that it was off). I know it sounds strange but this is the behavior.
Now the error:
During boot looks like this:
a lot of sutff.
Arch linux welcome screen
::Starting udev events
::Triggering udev events
::Loading modules
::Loading standard acpi modules
::Waiting for udev event to be processed
KERNEL PANIC
The title of the panic says Hardware Error
There is a lot info, with hexadecimal numbers, and a stack-trace in the end, but I was able to retrieve only few line (well after 30s it will reboot)
Hardware Error
CPU Machine check exception
????? processor context corrupt
Kernel Panic: ???? not syncing
Where dots represent a lot of info, and question marks a words that I probably missed.
I wouldn't worry that much if it was after I changed the hardware, or installed some new kernel, but i DIDN'T :( Its just happend 4-5days ago and keeps happening every day, once a day.
Any help please?
Last edited by skwo (2010-02-06 12:15:46)
Maybe you are looking for
-
Album artwork not showing up on apple TV but does in iTunes
I have had some syncing issues with ATV but seem to have gotten things to sync (occasionally) but even when I am syncd only about 10 out of a few hundred albums display the artwork on ATV? Is this a syncing problem still or should I not expect the ar
-
Include LabVIEW Run-Time Engine in C# Project Distribution
I have written a software package in Visual Studio using C# which calls a number of functions from a dll which I have built in LabVIEW. I am now trying to produce an installation program for my C# package but can't quite work out how to include the L
-
Pdf file sent via email attachment gets a webloc extension
Someone sent an email with a pdf attachment to our entire school via our google mail account. People with PCs were able to open the pdf files. Mac users received the pdf files with a webloc extension (i.e. - filename.pdf.webloc) and were unable to op
-
Creation of an event : problem with the container
Hi Gurus, I'm facing a problem in creation of an event. I'm in SAP ECC 6.0 for a migration project from 4.6B In an ABAP program I'm trying to create an event in order to launch a workflow. 1st step : Set datas in the container -> In INTERNAL_TABLE I
-
Cannot insert String[] objects in PreparedStatements !!!
Hello guys, I'm using PostgreSQL 7.0.3 for a website project. I've got a table in the website database system which has a integer array type, e.g. create table preferences( user_id integer references user, music varchar(20)[5], magazines varchar(20)[