Kernel Panic when closing laptop during shut down
It was the 2nd day I had my MBP and was jsut heading to sleep.
I had selected Apple > Shut Down to turn off the comp, and closed the laptop (I put the screen down and whatnot)
Few minutes passed, and I still saw the sleep light on for some reason. I opened the laptop back up, and there was the Kernel Panic screen.
I have no idea why it did this. Should I be worried?
It was just the 2nd day the MBP was in my possession and it would be really lame if problems were already arising THAT early.
MacBook Pro Mac OS X (10.4.7)
The machine hadn't completed the shutdown process when you shut the lid and effectively told it to sleep. The conflict between the two tasks is what caused the panic. Wait until you see the MBP actually shut down before closing the lid. There are also some out there who suggest letting it cool a few minutes before shutting the lid to save the screen, which kind of makes sense depending on how intensively you'd been running it prior.
Similar Messages
-
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
Kernel Panics When Shutting Down
Hi guys,
I'm having these occasional kernel panics when shutting down. My MBP 13-inch 2012 non-retina just restarts showing the message "Your computer restarted because of a problem". Here is the kernel panic log:
Fri Nov 30 10:45:46 2012
panic(cpu 1 caller 0xffffff80044b7bd5): Kernel trap at 0xffffff80044460b4, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fd2e2344340, CR3: 0x000000006d78402c, CR4: 0x00000000001606e0
RAX: 0xdeadbeefdeadbeef, RBX: 0xffffff7f860a8148, RCX: 0xffffff8025f72160, RDX: 0x0000000000000000
RSP: 0xffffff801a702940, RBP: 0xffffff801a702940, RSI: 0xffffff7f860a8368, RDI: 0xffffff80240d5000
R8: 0xffffff80269646c8, R9: 0x0000000000000000, R10: 0xffffff8025f72160, R11: 0x0000000000000000
R12: 0x0000000000000001, R13: 0xffffff80269646c8, R14: 0xffffff80269646c8, R15: 0xffffff8025f72160
RFL: 0x0000000000010282, RIP: 0xffffff80044460b4, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fd2e2344340, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff801a7025e0 : 0xffffff800441d626
0xffffff801a702650 : 0xffffff80044b7bd5
0xffffff801a702820 : 0xffffff80044ce4ed
0xffffff801a702840 : 0xffffff80044460b4
0xffffff801a702940 : 0xffffff800450f9e6
0xffffff801a702950 : 0xffffff7f860a6fe1
0xffffff801a7029b0 : 0xffffff7f860a643b
0xffffff801a703a30 : 0xffffff8004740db1
0xffffff801a703a90 : 0xffffff80044f56a6
0xffffff801a703ae0 : 0xffffff8004509351
0xffffff801a703b90 : 0xffffff80044fbb49
0xffffff801a703c40 : 0xffffff80044fc314
0xffffff801a703f50 : 0xffffff80047e182a
0xffffff801a703fb0 : 0xffffff80044ced33
Kernel Extensions in backtrace:
com.avast.AvastFileShield(1.0.1)[08DA113C-A80F-ED99-7483-18486AEB1E8C]@0xffffff 7f860a5000->0xffffff7f860aafff
BSD process name corresponding to current thread: talagent
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000004200000
Kernel text base: 0xffffff8004400000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 45991996233167
last loaded kext at 40887405791974: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f860ae000, size 16384)
last unloaded kext at 40998946674248: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f860ae000, size 12288)
loaded kexts:
com.avast.PacketForwarder 1.3
com.avast.AvastFileShield 1.0.1
com.apple.filesystems.ntfs 3.10
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleIntelHD4000Graphics 8.0.0
com.apple.driver.AppleIntelFramebufferCapri 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBXHCI 1.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Help would be appreciated, thanks!Uninstall avast:
com.avast.PacketForwarder 1.3
com.avast.AvastFileShield 1.0.1
...and see if that solves your problem. It has for many.
Clinton -
I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).
Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.
-
My Satellite laptop (A305) shuts down when run on the AC charger/adapter
The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
One interesting thing is that the _computer runs fine on AC when in safe mode_.
I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?I have Satellite A300 and until now everything works OK.
I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
If not let OS run and put the battery.
Is the battery recognized properly? Does notebook switch off again?
To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
Full diagnosis?
And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help. -
my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit
Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook
-
Kernel panic when I try startx: edited again
I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of fileKeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew -
Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
Kernel Extensions in backtrace:
com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver 1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 7.1.2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.ATIRadeonX2000 7.1.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.CoreStorageFsck 182.10
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AirPortBrcm43224 500.36.11
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI2600Controller 7.1.2
com.apple.kext.ATISupport 7.1.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.CoreStorage 182.10
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
DaveHi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave -
Hard lockup when closing laptop lid (Linux 2.6.23)
I just found this out a few days ago, telling my laptop to shut down a few hours later, and still finding it running half a day later, severely overheated (!).
I am running a custom kernel (2.6.23.1 with some of the kamikaze broken out patches). I get this:
- I unplug the laptop USB mouse
- I close the lid
- I reopen the lid, only to find my system completely locked up (no screen refresh anymore, no possibility to switch to a virtual terminal, no possibility to restart X or restart the system (Ctrl+Alt+Del/Backspace aren't working at all).
I have no action specified for closing the lid (I plan on making it do suspend to RAM as soon as this issue is cleared up). Now if I leave the USB laptop mouse plugged in all works fine. I can close the lid, open it up again, and my system remains fully usable.
To make sure this wasn't just me being clumsy and compiling a bad kernel, I tried the 2.6.23-ARCH kernel from testing. It exhibits exactly the same behaviour. 2.6.22-ARCH works just fine.
Are there people having the same issue?
Last edited by B (2007-10-21 12:16:32)Okay guys . I got some goodies up . For those interested:
- 2.6.22.12 kernel with CFS v22, hrtimers, powertop, Reiser4 and default CPU frequency governor 'ondemand'
- iwlwifi 1.1.21
- Authentec fingerprint reader driver
I guess that should get you going pretty much . The iwlwifi drivers have been built out-of-tree since my efforts to merging in the newer mac80211 stack & latest iwlwifi drivers amounted to nothing but a boatload of patch errors :-( (yes i can hack up patches to work but I felt like not doing it, since iwlwifi builds just fine out-of-tree). This kernel is tailored to the 6510 hardware, I cannot tell what is different in the 6170b lineup, but you definitely should not try this kernel on just any machine .
If you have any questions, drop me a line.
Credit of course to waninkoko for his kamikaze patchset, from which most of the patches come.
Update: to the latest 2.6.22.12 kernel + corresponding driver packages
Last edited by B (2007-11-11 16:39:48) -
Kernel panics when in sleep mode
I bought a macbook pro about a month ago. It first came with Mountain Lion installed on it. I began having kernel panics when I put the laptop into sleep mode by closing the lid. After some time I would open the lid to find that the laptop had rebooted with a kernel panic. This continued to sporadically happen. I called apple and went to the apple store. The mbp passed their hardware tests so they did a clean Yosemite installation. I am still having the kernel panics. They all look nearly identical. I'm not sure what could be causing this. Any ideas are appreciated.
*** Panic Report ***
panic(cpu 0 caller 0xffffff7faed8bbdb): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000144: CFG 0x0fd510de 0x00100406 0xc0000000, BAR0 0x104000000 0xffffff80ca10b000 0x0e7150a2, D0, P0/3\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.10.22/src/Appl eMuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff809fb8bba0 : 0xffffff802c12bda1
0xffffff809fb8bc20 : 0xffffff7faed8bbdb
0xffffff809fb8bd00 : 0xffffff7faccc8e38
0xffffff809fb8bdc0 : 0xffffff7facd932c6
0xffffff809fb8be00 : 0xffffff7facfc8acc
0xffffff809fb8be20 : 0xffffff7facccf80e
0xffffff809fb8bec0 : 0xffffff7facc7e8c0
0xffffff809fb8bee0 : 0xffffff802c6d95d5
0xffffff809fb8bf10 : 0xffffff7fac93f74d
0xffffff809fb8bf50 : 0xffffff7faee00bf4
0xffffff809fb8bf60 : 0xffffff7faee08cfb
0xffffff809fb8bf80 : 0xffffff802c21708b
0xffffff809fb8bfd0 : 0xffffff802c234d39
0xffffff80c5453d10 : 0xffffff7facd932c6
0xffffff80c5453d50 : 0xffffff7facf65f00
0xffffff80c5453d60 : 0xffffff7facd6758f
0xffffff80c5453d80 : 0xffffff7face0a0b7
0xffffff80c5453e00 : 0xffffff7faccb1612
0xffffff80c5453ec0 : 0xffffff7facc7ebc5
0xffffff80c5453f00 : 0xffffff802c15e759
0xffffff80c5453fb0 : 0xffffff802c2125b7
Kernel Extensions in backtrace:
com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000->0xffffff7fac952fff
com.apple.driver.AppleACPIPlatform(3.1)[97299A71-6EDD-3AD9-AE1D-2F7B61E8AA72]@0 xffffff7faedfa000->0xffffff7faee58fff
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7facba9000
dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
com.apple.driver.AppleMuxControl(3.10.22)[26F693CB-BFE8-33FA-9D1F-3F66FC016768] @0xffffff7faed7d000->0xffffff7faed90fff
dependency: com.apple.driver.AppleGraphicsControl(3.10.22)[61967104-88AF-3605-82F5-A480A280 0A78]@0xffffff7faed75000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7facba9000
dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7facc1b000
dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[65E3187E-949B-36E9-BA33-1B13ABB058 1A]@0xffffff7faed78000
com.apple.nvidia.driver.NVDAResman(10.0.2)[887AA320-9757-3030-996B-2DA348C9F19A ]@0xffffff7facc78000->0xffffff7faceedfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[C0B8A85D-B32A-3F24-B4FC-B62B3BBF9E57]@0xff ffff7facc62000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7facc1b000
dependency: com.apple.AppleGraphicsDeviceControl(3.10.22)[44D7223C-9628-3FEA-A3B8-27DE9E1CE 0C3]@0xffffff7facc72000
com.apple.nvidia.driver.NVDAGK100Hal(10.0.2)[DC43029D-568A-3B7C-976B-E922C17F51 43]@0xffffff7facef9000->0xffffff7fad0a6fff
dependency: com.apple.nvidia.driver.NVDAResman(10.0.2)[887AA320-9757-3030-996B-2DA348C9F19A ]@0xffffff7facc78000
dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
Apparently the forum software here is preventing my from posting my entire log.After doing a clean install of Yosemite this same kernel panic continued to happen and I started getting gpuRestarts as well. Finally they replaced my logic board at the apple store and so far no more panics. My google results lead me to believe this was a failing GPU.
-
My iTunes wont close and is preventing my laptop from shutting down
I plugged out my iPod touch when iTunes was asking me whether I wanted an update or not, and now iTunes wont close and has frozen, preventing my laptop from shutting down. I have intel Celeron inside and Windows 7.
Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook
-
What is wrong with my user account?? Why do I get kernel panic when restart
Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation -
Kernel panic when waking PowerBook from sleep on a new network
I occasionally take my PowerBook from home to work, and lately there have been several instances of my PB having a kernel panic when I plug in the ethernet cable and wake it from sleep. I have not tested this extensively, but it seems to occur under the following conditions:
1. PB is disconnected from network location 1, and the lid is closed so that it goes to sleep.
2. PB is moved to network location 2, the ethernet cable at that location is plugged in, and then the computer lid is opened, causing the computer to awake from sleep.
3. The computer has a kernel panic immediately on awaking.
I believe, but am not absolutely positive, that this does not occur if I awake the computer first, and then plug in the ethernet cable. Unfortunately that order of doing things is counter-intuitive to me, as I tend to want to plug everything in before waking the computer up.
Possibly a factor: At my home location I have a manually assigned IP address and other location-specific settings, whereas at work I change the network settings to fully automatic once the computer starts up.Hello DistantThunder
In most cases kernel panics are a result of a hardware error on some cases a software error.
I would suggest you look at an excellent procedure for resolving these issues on Dr Smoke's website.
http://www.thexlab.com/faqs/kernelpanics.html -
Laptop doesnt shut down properly or sleep
There seems to be a big problem with my laptop. It seems to not shut down properly, or awake from sleep properly. When it goes to sleep, you need to hold down the power button to turn it off, then turn it back on again Also when you shut it down, the fan seems to be on, the light on the power button seems to be on, so you once again have to hold down the power button to turn it off that way to turn it back on I've updated the bios and rolled them back, and still getting this problem Pavilion p157na Thanks
Hello , Welcome back to the HP Support Forums! I came across your post about the laptop not shutting down, and wanted to assist you! Please review the following resources, as they may help to resolve the issue for you:HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8)HP Notebook PCs - Computer Does Not Start (Windows 8)Laptop won't shut down completely (Not a HP supported Web site). Please let me know if this information was helpful by clicking the thumbs up below.
Have a great weekend! -
Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with external HD firewire 800 after 20 sec...
I don't know what it could be???
Do you???
Thanx
JayI'm actually having a similar issue and I don't think its related to networking at all.
I'm currently working in a corporate environment where we deploy pre-built OS X images to machines. I recently upgraded my images to 10.4.10 before we got our first Santa Rosa machine. This image was built on a MacPro and worked on all Intel Macs down to a MacMini CoreSolo. When I deployed my prebuilt image to the SR MBP, it caused a kernel panic immediately.
Further investigation revealed previous builds of OS X, including 10.4.10 upgraded from any other model Intel Mac will kernel panic the SR MBP. Going backwards the SR Build of OSX will not work on any previous model Mac, as any other build typically does, but causes severe graphical distortion, as if it does not have the display drivers for the other Macs.
To make a long story short, I think your issue comes from the fact that your external hard drive has an older build of OS X 10.4 than the SR MBP will run (even though you may have upgraded it to 10.4.10). Anyone who can corroborate my story with some more testing, please chime in.
I haven't found a solution for this issue yet other than keeping a seperate Santa Rosa Core 2 Duo image for my deployments.
Maybe you are looking for
-
Problem to open an office document
Hi, When I try to open a attached file in Mail, Mail ask me to choose an application ( Word and excel only, Pdf is fine) If I open a Word document from my desktop, it's fine. When I open an Excel document from my desktop, I have an error 10660. Could
-
Workflow with release strategy
Hi All, Can anyone tell me if it is necessary when using workflow to help with the PR release that it be first released by the requisitioner, then the approver, then the buyer. Then it will be ready to process the PO. We are configuring workflow int
-
Can I shuffle within a playlist?
I have many gigs of different kinds of music on my iPod touch. What are the limitations of shuffle? I know iPod doesn't recognize folder 'categories' of music, like classical, jazz, etc. But am I able to shuffle (by shaking, I guess) within a given p
-
Set target fileds from source fields using JDBC lookUp
hello : advance thanks for reading below and i am new to java how to to set the two taget fileds T1 and T2 from source field S1 using jdbc look up .Here is the code and its giving syntax error . set T1 to approver1 and T2 to approver2 I copied the c
-
Hello, I am somewhat new to MS Project 2013 (I learned on 2010) and I am trying to develop my skills with the reporting functions. For one of the projects that I lead, I want to develop a Task Dashboard that contains pertinent information and KPIs f