Kernel Panic when plugged in

I have a 1.5 GHz 15" powerbook (purchased August '05) that has been having a lot of trouble with kernel panics. Normally, this happens when I have some fairly intensive program running, like Luna Insight. And here's the strange part: It only happens when the AC Adapter in plugged in. I've run the hardware test, and everything is coming back passed. On top of that, I have no 3rd party RAM in the machine, it is a pair of factory-installed 512 MB sticks. I've reseated the RAM, tried running with just one stick, reset the PMU, tried just about every energy saver setting, and zapped the PRAM, just in case. Is it time for a logic board swap? Or is there something else I could be missing?

1 of 2 .
1 Either the motherboard has fried or does not get enough power from the wall/electric socket "brown-out" as they are very sensitive to fluctuations in power level. " commen problem in USA"
2 Could be the software, first try to create a new user and installing the program again in the new user and try it maybe this helps then it is in the /user/you/library that the fault lies.
If not then reinstall OSX after making a complete backup to dvd or external hd and reinstall the program again.
Leave the user files IE: documents , music etc off of your MAC and test it if this is stil happening they likely you have hardware issues.
PS: www.macupdate.com look for hardware monitor or go to http://www.bresink.de/osx/index.html as you can run this in trail mode and it should show you the voltages of the whole system even fan speed for left and right fan etc. ????
You might want to keep an eye on the battery and ac line and see if there is a lot of fluctuation esp. on Power cable if so then there might not be hardware issues for now but it could over a long time damage you Pbook by fluctuating too much. "see espc. when clothes dryer starts up how it dips"
Agian if not then Hardware problem and call Apple Care.
Best of luck.
Having some Earl grey tea. MMMMMMMM nice.

Similar Messages

Kernel Panic when plugging Firewire devices

I have a Kernal Panic each time I plug something in the Firewire ports. I already have tried many things to solve this issue, in vain (see here, in french : http://www.xrings.net/xrings/forum/viewtopic.php?t=216 )
If somebody has any suggestion... Thanks !

Thank you jeffdc, but I have done it.
In fact, I've done all the things I could think about : they are listed in the link referring to an other forum (in french) in the first topic of this discussion :
http://www.xrings.net/xrings/forum/viewtopic.php?t=216.
I translate it here in english :
MY MAC. Power PC G4 800 MHz 256 Mo. System : OS X 10.4.2.
ISSUE. Kernel Panic each time I try to connect any kind of device (HD, iPod) to any of my Firewire ports.
CABLES AND DEVICES. I changed external Firewire cables and devices to be sure that the problem was not coming from them. The kernel panic appears systematicaly after connecting to the Firewire ports, when the computer is switched on as switched off with a reset...
FIREWIRE PORTS. I followed the instructions from the Apple Support Site : disconnect evreything (USB and all ports), switch off and disconnect the computer from the electricity alimentation cable, wait a few minutes, reconnect, switch on. Nothing changed.
HARDWARE TEST. I reboot on the Apple Hardware Test CD. Results were OK. I've done it twice : first time with iPod connected on the firewire, second time with nothing connected on the firewire port. First time the result was OK : firewire was indicated as "present". Second time it was OK too : it was indicated as "absent". So the computer is able to detect the Firewire device... (PS. I don't have any trouble with the iPod, nor with the software nor with the hardware, when the connection is with USB, so the iPod and its software are OK.)
AUTORISATIONS. I have of course repaired the autorisations with Disk Utility. Nothing changed.
NVRAM. I have done a reboot in Open Firmware (pommealt+of) to reset the Non Volatil RAM (reset-nvram, reset-all). For no result.
CORRUPTED, HIDDEN FILES. I've tried to do a big cleaning with Applejack utility (corrupted files etc.) in Open Firmware again. Again in vain.
NEW SYSTEM ON A PARTITION. My HD is divided en three partitions, so I've done a reboot on the Installation CD from my old 10.2 System on a partition containing only documents. I made a reset on that System, done a few upgradings (System, iTunes and iPod), and now that partition is 10.2.8.
NEW FIREWIRE TEST ON THE REINSTALLED SYSTEM. Under that freshly reinstalled System 10.2.8, I tried again to connect the iPod on the FireWire port : Kernel Panic again.
QUESTION. So, what does happen ? Is it a software or a hardware issue ? Or an original bug in the 10.2 system ? What can I do ?
Thank you again to all the people who have already read my post and took time to give me an answer, and to all the people who will do it.

What is wrong with my user account?? Why do I get kernel panic when restart

Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!

Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation

Kernel panic when waking PowerBook from sleep on a new network

I occasionally take my PowerBook from home to work, and lately there have been several instances of my PB having a kernel panic when I plug in the ethernet cable and wake it from sleep. I have not tested this extensively, but it seems to occur under the following conditions:
1. PB is disconnected from network location 1, and the lid is closed so that it goes to sleep.
2. PB is moved to network location 2, the ethernet cable at that location is plugged in, and then the computer lid is opened, causing the computer to awake from sleep.
3. The computer has a kernel panic immediately on awaking.
I believe, but am not absolutely positive, that this does not occur if I awake the computer first, and then plug in the ethernet cable. Unfortunately that order of doing things is counter-intuitive to me, as I tend to want to plug everything in before waking the computer up.
Possibly a factor: At my home location I have a manually assigned IP address and other location-specific settings, whereas at work I change the network settings to fully automatic once the computer starts up.

Hello DistantThunder
In most cases kernel panics are a result of a hardware error on some cases a software error.
I would suggest you look at an excellent procedure for resolving these issues on Dr Smoke's website.
http://www.thexlab.com/faqs/kernelpanics.html

Kernel Panic when using Garageband with Blue Snowball USB mic

*HI ALL,*
*I purchased Mac Pro recently about 3 weeks ago. I am on the latest updates including the recent firmware update. However whenever I use garageband with external USB mic(Blue Snowball) my Kernel Panics and OS freezes and forces me to Power On again. It happened 20 times so far in few hours.*
*I opened garageband first time today after bought this external mic from apple store. I did not use garageband without this mic plugged into USB, I only used garageband with MIC plugged in and in couple of minutes to 5 minutes of using garageband the Kernel Panic occurs. Need your help please. Here is the message I get after login again which I reported consistently to Apple. Any immediate help is appreciated. I use iMove, iPhoto and other apps without any problem. Harddisk verification went o.k.*
Sun Apr 6 22:13:35 2008
panic(cpu 7 caller 0x001A8C8A): Kernel trap at 0x004209d5, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x0000000c, CR3: 0x013fe000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x0ea7c3c0, ECX: 0x1059f4f0, EDX: 0x85ccfb8c
CR2: 0x0000000c, EBP: 0x85ccfb08, ESI: 0x0ea7c3c8, EDI: 0x0ea7c3d0
EFL: 0x00010202, EIP: 0x004209d5, CS: 0x00000008, DS: 0x11ac0010
Error code: 0x00000002
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x85ccf8f8 : 0x12b0f7 (0x4581f4 0x85ccf92c 0x133230 0x0)
0x85ccf948 : 0x1a8c8a (0x461720 0x4209d5 0xe 0x460ed0)
0x85ccfa28 : 0x19ece5 (0x85ccfa40 0x4256f6 0x85ccfb08 0x4209d5)
0x85ccfa38 : 0x4209d5 (0xe 0x85cc0048 0x10 0xe920010)
0x85ccfb08 : 0x42028d (0xea7c3c0 0x85ccfb8c 0x0 0x0)
0x85ccfb58 : 0x420c0e (0xea8b700 0x420978 0x85ccfb8c 0x0)
0x85ccfba8 : 0x6055d9 (0xea7c3c0 0x0 0x85ccfc08 0x615b08)
0x85ccfc08 : 0x609a11 (0xe92a000 0xeed0240 0xf56bff 0x0)
0x85ccfc68 : 0x86334bde (0x13c56800 0xeed0240 0xf56bff 0x0)
0x85ccfcd8 : 0x86334ddd (0xfbe4400 0x2 0x1 0x14)
0x85ccfcf8 : 0x86335056 (0xfbe4400 0x14 0xf7f4a80 0x7c79d6)
0x85ccfd38 : 0x86335156 (0xfbe4400 0x54 0x0 0xf7f4a80)
0x85ccfd88 : 0x9f2e64 (0xfbe4400 0x8634d000 0x862c1010 0x110a)
0x85ccfdf8 : 0x9eec9f (0xfd03600 0x10506588 0x110a 0x3ea740)
0x85ccfe68 : 0x9ee169 (0x13d7d000 0x110a 0x13c4c940 0x13dbab7c)
0x85ccfea8 : 0x43c47e (0x13d7d000 0x110a 0x55f 0x1)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBAudio(2.5.4b4)@0x86326000->0x8634cfff
dependency: com.apple.iokit.IOAudioFamily(1.6.4b7)@0x9e4000
dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x5ff000
com.apple.iokit.IOAudioFamily(1.6.4b7)@0x9e4000->0x9fafff
dependency: com.apple.kext.OSvKernDSPLib(1.1)@0x9e1000
com.apple.iokit.IOUSBFamily(3.0.8)@0x5ff000->0x626fff
BSD process name corresponding to current thread: GarageBand
Mac OS version:
9C7010
Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)

I've been getting a number of kernel panics when using USB Mics with Skype, though I have not experienced any crashes when using Garageband.
The crash report cited the AppleUSBAudio driver as the culprit. Here's the set up:
MacBookPro Core2 2.66 15"
Mac OS X 10.5.2
Blue Snowflake USB Mic, Blue Snowball USB Mic
Skype (latest rev - 2.7.0.257)
AppleUSBAudio.kext version 2.5.6b3
Seems to be a lot of crashiness with USB Audio in 10.5.2 - let's hope we see a patch soon

Kernel Panic when attaching time machine USB external drive

Really hope someone can help me with this.
I've got a late 2011 Macbook Pro, and was running Time Machine on a 500GB GDrive USB external drive. Was working fine when I last attached it on Feb 29. The Time Machine backup was encrypted.
When I tried to use it yesterday, as I have lost all my iTunes data on another drive, I got a Kernel Panic when I entered the password for the drive.
I managed to de-encrypt the drive using Disk Utility, but now I get a Kernel Panic everytime I plug the **** drive in.
I really need this backup data, would appreciate any help people can offer. Am running Lion 7.3, and the same error occurs on a Lion iMac that I have tried the drive on.

Really hope someone can help me with this.
I've got a late 2011 Macbook Pro, and was running Time Machine on a 500GB GDrive USB external drive. Was working fine when I last attached it on Feb 29. The Time Machine backup was encrypted.
When I tried to use it yesterday, as I have lost all my iTunes data on another drive, I got a Kernel Panic when I entered the password for the drive.
I managed to de-encrypt the drive using Disk Utility, but now I get a Kernel Panic everytime I plug the **** drive in.
I really need this backup data, would appreciate any help people can offer. Am running Lion 7.3, and the same error occurs on a Lion iMac that I have tried the drive on.

MacPro Kernel Panic when audio cable is unplugged...

Hello,
My MacPro running SnowLeopard Kernel Panics when I unplug the speaker cable from the back. No new hardware/software has been installed recently. Any insight??
thanks!

I think you need to post the panic dump listing for folks to help you. There's no way anyone could guess based on no real information.

TS3742 Kernel Panic when I am updating the software

I am having the Kernel Panic when I am updating the software I tried 3 times every time the Kernel Panic thing appears, how can I resolve that?

Start with posting the latest KP report. Then, cite the update.

Kernel panic when I try startx: edited again

I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of file

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panic when I try to install OSX 10.3. Can anyone help?

I bought this iMac recently. It has OS 10.2.? installed and OS 9.1. When I try to install OS 10.3 I get a Kernel Panic when it reboots to start the installation. I ran the Norton Disk Doctor it had over in OS9 -- said it fixed some things and now ok but I still get a Kernel Panic trying to install Panther. I just want to re-format the whole computer with 10.3 and get rid of 9. How can I do that?
Thanks.

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panic when I use hot corner to put display to sleep (twice)

As the title above says, for the second night in a row, my new iMac (2012) has had a kernel panic when I perform that action. I also turn off my magic mouse to save the batteries but I'm constantly doing both of these actions throughout the day when I know I'm not going to being using my iMac for some time. Both occurences happened on consecutive nights. Any help would be greatly appreciated
Interval Since Last Panic Report: 50222 sec
Panics Since Last Report:          1
Anonymous UUID:                    -
Tue Feb 26 04:19:38 2013
panic(cpu 1 caller 0xffffff800b8156b0): "Spinlock acquisition timed out: lock=0xffffff8034706638, lock owner thread=0xffffff8021d16000, current_thread: 0xffffff8021d16000, lock owner active on CPU 0x1, current owner: 0xffffff8021d16000"@/SourceCache/xnu/xnu-2050.20.9/osfmk/i386/locks_i386.c:363
Backtrace (CPU 1), Frame : Return Address
0xffffff80fd0bbce0 : 0xffffff800b81d626
0xffffff80fd0bbd50 : 0xffffff800b8156b0
0xffffff80fd0bbd70 : 0xffffff800b820b80
0xffffff80fd0bbda0 : 0xffffff800b810448
0xffffff80fd0bbdf0 : 0xffffff800b820df2
0xffffff80fd0bbe20 : 0xffffff800b84f0a1
0xffffff80fd0bbe60 : 0xffffff800b816d00
0xffffff80fd0bbeb0 : 0xffffff800b819f64
0xffffff80fd0bbee0 : 0xffffff800b818c97
0xffffff80fd0bbf00 : 0xffffff800b8a5c5e
0xffffff80fd0bbfb0 : 0xffffff800b8cd9ce
BSD process name corresponding to current thread: USB Print and St
Mac OS version:
12C3103
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
Kernel slide:     0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 67275470613942
last loaded kext at 66457127051521: com.apple.driver.AppleProfileTimestampAction          97 (addr 0xffffff7f8dc46000, size 16384)
last unloaded kext at 34782554650228: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f8dbe4000, size 12288)
loaded kexts:
com.silex.driver.sxuptp          1.5.1
com.Cycling74.driver.Soundflower          1.6.3
com.apple.driver.AppleIntelProfile          97
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          75.19
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.2f9
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.81
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleHDA          2.3.5fc12
com.apple.driver.AppleMikeyDriver          2.3.5fc12
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.2f9
com.apple.GeForce          8.0.6
com.apple.driver.AppleIntelHD4000Graphics          8.0.6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.13
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleIntelFramebufferCapri          8.0.6
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleSDXC          1.4.0
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBHub          5.5.0
com.apple.iokit.AppleBCM5701Ethernet          3.5.0b9
com.apple.driver.AirPort.Brcm4331          612.20.15
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          1.5.1
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleProfileTimestampAction          97
com.apple.driver.AppleProfileThreadInfoAction          97
com.apple.driver.AppleProfileRegisterStateAction          97
com.apple.driver.AppleProfileReadCounterAction          97
com.apple.driver.AppleProfileKEventAction          97
com.apple.driver.AppleProfileCallstackAction          97
com.apple.iokit.AppleProfileFamily          97
com.apple.driver.IOBluetoothHIDDriver          4.1.2f9
com.apple.driver.AppleMultitouchDriver          235.29
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.5fc12
com.apple.nvidia.nvGK100hal          8.0.6
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.2f9
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.iokit.IOBluetoothFamily          4.1.2f9
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleGraphicsControl          3.2.13
com.apple.NVDAResman          8.0.6
com.apple.driver.IOPlatformPluginFamily          5.3.0d47
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.5fc12
com.apple.iokit.IOHDAFamily          2.3.5fc12
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.0
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.6.3
com.apple.iokit.IOThunderboltFamily          2.1.8
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IOUSBUserClient          5.5.0
com.apple.iokit.IO80211Family          510.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.15)
Bluetooth: Version 4.1.2f9 11046, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS541010A9E662, 1 TB
USB Device: External USB 3.0, 0x0480 (Toshiba America Info. Systems, Inc.), 0xd010, 0x14a00000 / 2
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0x1d110000 / 8
USB Device: iPod, apple_vendor_id, 0x129e, 0x1d113000 / 10
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0x1d112000 / 9
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 5
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: Desktop, 0x0bc2 (Seagate LLC), 0x3300, 0x1a130000 / 4
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3

Any or all of the following third-party system modifications may be contributing to your problem:
SX-Virtual Link
Soundflower
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

MBP Kernel Panic when connecting to HDTV (DVI)

I have a 15" MacBook Pro that has been working perfectly since I got it. I tried today to connect it to my Hitachi 51" HDTV (via DVI) and got an instant Kernel Panic. I used my 15" Powerbook with this HDTV without any issues.
I've searched and found folks with kernel panics when waking their MBP if the RAM is faulty, but nothing at all about issues when connecting an external display. I am running with all the latest updates, firmware update, etc.
I don't have any problems connecting to a 23" Cinema display or to a 19" Samsung LCD, but I tried several times to connect to the HDTV and got a kernel panic each time. I changed resolutions on one try and still got the same issue (720x480 so the TV would see it as 480p). I even tried booting up with the display already connected and it kernel panic'd when it tried to switch into the full OS X GUI.
The specific error is in the panic.log is:
Sat Jun 10 16:23:48 2006
panic(cpu 0 caller 0x0019CAEF): Unresolved kernel trap (CPU 0, Type 0=divide error), registers:
CR0: 0x80010033, CR2: 0x35863000, CR3: 0x00d6e000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0x00000000, ECX: 0x251a36fc, EDX: 0x00000000
ESP: 0x251a360c, EBP: 0x251a36d8, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010247, EIP: 0x0078ca44, CS: 0x00000008, DS: 0x0a8c0010
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.kext.ATINDRV(4.2.6)@0x771000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.3)@0x574000
dependency: com.apple.iokit.IONDRVSupport(1.4.3)@0x58f000
com.apple.iokit.IONDRVSupport(1.4.3)@0x58f000
dependency: com.apple.iokit.IOPCIFamily(2.0)@0x565000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.3)@0x574000
So definitely something with the graphics subsystem. Anyone have any hints?
MacBook Pro 2GHz 2GB RAM ATI x1600 256MB Mac OS X (10.4.6)

What happens if you boot from the DVD that came with the MBP instead of booting from your hard drive? It could have something to do with your configuration.

Kernel Panic when launching safari OS X mavericks

Hello, i would really appreciate your input guys. Sometimes I am getting kernel panics when i launch safari, this occurs mostly when i turn mac on and then launch the safari, when i launch something else it wont happen. I already tried verifying disk and I also clean installed Mavericks. Any advice is welcome. Thanks!
Here`s the log:
Anonymous UUID:       CB452275-9E8D-97A4-A782-209B3FC6FA76
Fri Jun 13 09:59:33 2014
panic(cpu 0 caller 0xffffff7f9e19af7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00070000: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8137ecc000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.5.26/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff8126ea2580 : 0xffffff801be22fa9
0xffffff8126ea2600 : 0xffffff7f9e19af7c
0xffffff8126ea26d0 : 0xffffff7f9c825e7b
0xffffff8126ea2790 : 0xffffff7f9c8ef46a
0xffffff8126ea27d0 : 0xffffff7f9ca70b2e
0xffffff8126ea2820 : 0xffffff7f9cae26e0
0xffffff8126ea2aa0 : 0xffffff7f9cae0fa9
0xffffff8126ea2c40 : 0xffffff7f9c8ca4ef
0xffffff8126ea2cd0 : 0xffffff7f9c7fbf8e
0xffffff8126ea2e00 : 0xffffff7f9c801e3a
0xffffff8126ea2ec0 : 0xffffff7f9c82a937
0xffffff8126ea30c0 : 0xffffff7f9c82c443
0xffffff8126ea31b0 : 0xffffff7f9d7d2747
0xffffff8126ea3240 : 0xffffff7f9d7d297b
0xffffff8126ea3260 : 0xffffff7f9d7cfb77
0xffffff8126ea34a0 : 0xffffff7f9d7c9358
0xffffff8126ea3610 : 0xffffff7f9d7c8d26
0xffffff8126ea3640 : 0xffffff7f9d7caedc
0xffffff8126ea3680 : 0xffffff7f9d7ca854
0xffffff8126ea3700 : 0xffffff7f9d7ca59c
0xffffff8126ea3780 : 0xffffff7f9d7b2ae0
0xffffff8126ea37e0 : 0xffffff7f9d7b33da
0xffffff8126ea3830 : 0xffffff7f9d7b3807
0xffffff8126ea38a0 : 0xffffff7f9d7b3fc8
0xffffff8126ea38e0 : 0xffffff7f9d780fea
0xffffff8126ea3a60 : 0xffffff7f9d7b0940
0xffffff8126ea3b20 : 0xffffff7f9d77fad9
0xffffff8126ea3b70 : 0xffffff801c2cea56
0xffffff8126ea3b90 : 0xffffff801c2d0051
0xffffff8126ea3bf0 : 0xffffff801c2cdabf
0xffffff8126ea3d40 : 0xffffff801beb66a8
0xffffff8126ea3e50 : 0xffffff801be26bf1
0xffffff8126ea3e80 : 0xffffff801be139f5
0xffffff8126ea3ef0 : 0xffffff801be1e043
0xffffff8126ea3f70 : 0xffffff801bec989d
0xffffff8126ea3fb0 : 0xffffff801bef3c76
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.5.26)[B67CD59F-1344-37BC-8A9A-46D6D3DCA13D]@ 0xffffff7f9e18c000->0xffffff7f9e19ffff
            dependency: com.apple.driver.AppleGraphicsControl(3.5.26)[C0F9A79F-167E-3A68-873C-5CE17B97F B11]@0xffffff7f9e184000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9c72b000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f9e187000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000->0xffffff7f9ca3efff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f9c7c6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9ca49000->0xffffff7f9ccf2fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
         com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f9 d76e000->0xffffff7f9d838fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f9c7c6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:     0x000000001bc00000
Kernel text base: 0xffffff801be00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 109308043883
last loaded kext at 6217964049: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f9ded7000, size 36864)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.4f1
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.14.15
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleMikeyDriver          2.6.1f2
com.apple.driver.AppleHDAHardwareConfigDriver          2.6.1f2
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleHDA          2.6.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleIntelHDGraphics          8.2.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.GeForceTesla          8.2.4
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.5.26
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelMCEReporter          104
com.apple.driver.AppleIntelHDGraphicsFB          8.2.4
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.nvidia.NVDAStartup          8.2.6
com.apple.iokit.IOBluetoothUSBDFU          4.2.4f1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.AppleUSBCardReader          3.4.1
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.driver.AppleUSBHub          666.4.0
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleFWOHCI          5.0.2
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleUSBUHCI          656.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          217.92.1
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          217.92.1
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.AppleGraphicsDeviceControl          3.5.26
com.apple.driver.DspFuncLib          2.6.1f2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.7fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSurface          91.1
com.apple.iokit.IOBluetoothFamily          4.2.4f1
com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.5.26
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleHDAController          2.6.1f2
com.apple.iokit.IOHDAFamily          2.6.1f2
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.IOPlatformPluginFamily          5.7.0d11
com.apple.driver.AppleSMC          3.1.8
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IOUSBFamily          677.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x830B, 0x4E54344743363442384847304E532D434720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x830B, 0x4E54344743363442384847304E532D434720
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD5000LPVX-08V0TT5, 500,11 GB
Serial ATA Device: ADATA SX900, 256,06 GB
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

You probably have the problem described at http://support.apple.com/kb/ts4088
gfxCardStatus by cody krieger may help by allowing you to keep the graphics set to one of the two modes
In any case : take it to Apple or an AASP & show them the report They should run a specific test with a simple pass/fail result shown on screen.
The three year period since purchase has probably passed; but nonetheless, if you're asked to pay, I'd call Apple customer service (or speak to the store manager ) & request that they consider your case. Several users here have previously obtained free repairs after doing so, even though outside the time limit. Here's a fairly recent one,
and another

Kernel Panic when Updating from Mac OS X 10.3.9 to 10.4.7 Server Software

I tried updating our G5 Xserve with the 10.4.7 DVD. Since I have only a CD drive in the Xserve, I used a Mac Mini in target mode with the Server Install DVD in the MacMini DVD drive. Upon restart at the beginning of the install process, I get a Kernal panic.
I have a Village Tronic MPDDpro graphics card with latest drivers. 1 GB of memory. (I also tried using an external DVD firewire drive, but get the same kernel panic when Xserve tries to boot from the OS X Server DVD)
I was unable to get the xrdiags to provide any output. Tried unsuccessfully to get a Mac Mini running OS X Server to Netboot properly, so tried with xrdiags on a CD. Again no output back to the terminal administering the xrdiags start.
I tried putting the Xserve in target mode and installing the 10.4.7 from the Mac Mini. Install process went through successfully, but when I rebooted the Xserve, and before getting to the Setup Assistant, I got the Kernel Panic again.
Needing then to re-install 10.3, I reinstalled the 10.3 Server with the original disks and updated to 10.3.9 and reinstalled all the application software and setup users etc, (days of work) all went well with 10.3.9 Server.
I need to get up to 10.4.7 soon!
Any ideas what to do next?
Xserve Mac OS X (10.3.9) Xserve G5 2Ghz with CD optical drive and MPDDpro graphics card

DaddyPaycheck
Thanks for helping. I'm green at this! Getting definite experience as you can see, but can you help me with an actual real live make and model of a graphics card that is known to work on the G5 Xserve?
I called ATI re: their Radeon 9200, and was told by tech support that they do not support this card on the G5 Xserve. Yet, Scott Maiden, in his post above, referenced an ATI Radeon card.
What cards are being successfully used? Can I have a list?
Apple Tech Support will not give any such list. Maybe they know of some problem with all? (When I bought the Xserve in September of 2004, Apple Tech Support recommended the VillageTronic card.) The new, yet un-released Quad-core 64-bit Intel Xeon Xserve has "built-in graphics functionality, with mini-DVI output and support for industry-standard VGA displays," according to Apple's web site. Hopefully this will eliminate this type of problem in future releases of Xserve. But for the nasty here and now...
All I need is an inexpensive graphics card to administer this Xserve. Currently I am using a 21” SuperMatch SVGA monitor.
Thank to all who have helped.
James
jamescalvin-
The only cards I have found to work reliably in the
G5 XServe are the cheap-arse PCI models. I do not use
my XServe for serious graphics work so I do not know
how it works with other cards.
Can you swap in a known compatible PCI card for
testing purposes?
Luck-
-DaddyPaycheck
DaddyPaycheck
Xserve Mac OS X (10.3.9) Need list of Compatible PCI graphics cards

Experiencing Kernel Panic when computer sleeps???

I have a late 2013 MBP... I recently updated my OS to 10.9.2 Immediately after updating my computer began experiencing kernel panics when it would sleep for various amounts of time (couldn't recognize a real pattern). After a few days the problem seemed to happen more frequently and eventually happened everytime the computer went to sleep. I contacted Apple Support and they have deduced that it is a hardware issue (doesn't make sense to me since it only started happening after a software update?). I did install an aftermarket SSD, so I thought perhaps that was the problem, so I installed a new one... to no avail, still experiencing the same problem. I've come up with a temporary solution... I simply have my computers settings adjusted so that my computer does not sleep. This obviously has not solved my problem, but is a temporary fix. Anybody have any ideas as to what is going on???? Thanks in advance!

The version of virtual box I have on my system may not be the most absolute current up to date, but it is certainly the mac os version. Besides, virtual box wasn't running. It's just a freebie alternative to Parallels allowing me to run windows. But again, unless I'm doing something in windows, virtual box isn't even fired up. It wasn't last night when I put the system to sleep.
How do I find the hardware test that came with my system? Is it on the install dvd? What's it called?
THANKS!!

Kernel Panic when plugged in

Similar Messages

Maybe you are looking for