Kernel panic when trying to upgrade from OS X 10.7.5

Running an intel imac with os x 10.7.5, I tried upgrading to mavericks. After downloading and try to restart, I get a persistent kernel panic. Have used disk utility from recovery HD to repair permissions and repair disk. Still get kernel panic screen on restart. What now?

If you can't boot in the usual way, try a safe boot. During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. If you have more than one user account, you must be logged in as an administrator to carry out these instructions. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. Post the entire contents of the report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report.

Similar Messages

My Macbook has a Kernel Panic when trying to boot from Mac OS Install DVD

It might also be relevant that my Accounts Preference Panel crashes System Preferences when I try to open it. Disk Utility sees no problems with my drive, and booting into single user mode and doing a disk check has no results.
I am running a 2010 Macbook
2GB Ram
2.4 Duel Core Processor
Mac OS 10.6.8
Windows Installed Via Bootcamp, but problems occured before Windows was installed as well.
Anything Else that I need to add?

Try reinstalling Snow Leopard. If you continue getting a kernel panic booting from the DVD, then either you have a bad installer disc or you have a hardware failure.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

IMac shuts down when trying to upgrade from Tiger to Leopard

My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanks

rk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

Snow Leopard Kernel Panics when trying to Force Quit Applications

I have been having this problem for about a month now. I am a heavy After Effects CS4 user so this happens to me primarily when working in AE, but definitely is not exclusive to AE. I am working on a 8 Core 2.66 GHz MacPro with 8 GB of RAM. The only other variables are an AJA KONA LSe capture card and a ATTO Celerity FC-41ES Fibre Card. The videocard is the standard ATI Radeon HD 4870. My drivers and software are all up to date.

Hi Mike,
I have a very similar setup and am also using AE CS4 heavily. I am experiencing exactly the same issues, and have found that it is the multi-processing rendering app (aeselflink) that is causing the kernel panic when you force quit.
I have reduced the amount of times this happens by making AE only use 6 of the 8 cores available, in the Memory & Multiprocessing preference section.
I save my work before rendering or previewing and cross my fingers !
Nic

Kernel panic when i upload pictures from a 2nd account

Hello,
I have a imac just over a year old.
My daughter tried to upload pictures to facebook from her user account and got a kerenl panic message. this happens every time she tries to upolad to facebook.
I tried the same upload from my account (admin) ans from my wifes account and had no problem uploading the pictures.
I did get a kernel panic once on my account during an online game, once about a month ago.
I have run disk genius, cocktail, repaired permissions, and repair disk.
And nothing has helped
Ive looked at the crash log but cant tell what is what.
Is their anything I can do to fix this problem?
Thank You for any help.
PB

HI and Welcome to Apple Discussions...
First because FB uses Java to go Safari/Preferences and select the Security tab. Where you see; Web content Make sure the top 3 buttons are checked.
Next, go here for help to install the Facebook plugin now required for uploading images.
http://www.facebook.com/help/?ref=pf#!/help.php?page=830
Go here to make sure the Facebook plugin is installed, go to ~/Libraryy/Internet Plug-Ins/ and make sure this file is there: fbplugin1_01.plugin.
Make sure you are running the latest version of Safari. From the Safari Menu Bar, click Safari/About Safari. It should be 4.0.4 If not, click the Apple Menu/Software Updates to bring your system sofware up to date.
Then repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Mac Pro gets kernel panic while trying to boot from Leopard install disk

Hi all,
I'm finally getting around to installing leopard on my 2006 Mac Pro. It has the x1900 video card from Apple and all firmware is up to date. The install disk upgraded my Macbook with no problems.
When booting I get the wipe to grey, kernel panic, "You must restart your Mac" screen. Any suggestions?
BTW the Leopard install disk installs OSX 10.5.0
Thanks
Pax

I finally found that the mac pro needs installer 10.5.2 or it will do the kernel panic thing. I did find a way around this though.
1) I took an external drive hooked to my macbook and installed 10.5 on it. Then booted from it and did all the updates, installed all my necessary software (ilife 08, parallels, and so on).
2) I then made sure my Mac pro's drive was currently backed up and then booted up from the backup and then used Carbon Copy Cloner to clone the new OS 10.5.4 Leopard disk onto my Mac Pro boot drive.
3) After that I used migration assistant to transfer all my user settings and such.
It all worked great and I now have Leopard on my Mac Pro.
Just thought I'd let everyone know how I got around it.
Pax

My 2012 MacBook Air 13 kernel panics when its opened up from a sleep

My 2012 Macbook Air 13 (512/2.0ghz/8gb) crashes (kernel panic) after the SMC update. It crashes when you open it after it has been sleeping for about 8 hours. It does this after it sits for about 8 hours closed (sleeping) on battery and while plugged in. It is easy to replicate, it happens every day when I come in to work and then when I open it to work in the evening. I have submitted the crash report to Apple each time it happens and explained the circumstances which caused it to crash. Anyone else having this issue? I'm on 10.8 and applied the recent SMC update. It never did this on Lion (what it shipped with).
Are there any power nap logs I can check to see if that is causing the issue? Can I disable power nap to try that?

im having the same issue as you zaze. my march 2012 macbook air hang every single time when it try to wake up from sleep mode. it started to happen after i upgrade to mountain lion and then the smc update. i believe is the smc update[power nap specifically] issue, because before that patch the Mountain Lion OS is doing fine[i update the smc patch a week after it was release so i'm pretty sure is tht smc patch issue.
tire of playing around with the config, on this and off tht, it does not help at all and still hang[keyboard not responding , screen hang, sometimes cursur can move but it can do nothing with it].
i need to go through this multiple times a day until i so fed up that i change sleep mode to kick in after it idle for 1 hour.

Kernel panic when trying to start a OEL5u5 template vm

Hi,
I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm.
The log in the OVMM console shows the following;
Update VM Status - Running
Configure CPU Cap
Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
raise Exception('%s => %s' % (args, err))
>
The xend.log shows;
[2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm.
[2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused.
[2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3.
[2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .
[2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3
[2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model
[2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated
as always any help is much appreciated.
Edited by: StewCobley on 13-Nov-2012 06:23

I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens..
Started domain 32_EM11g_OVM (id=4)
Bootdata ok (command line is ro root=LABEL=/ )
Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000180800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 1574912
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 1600.008 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Software IO TLB disabled
Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init)
Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
CPU: L2 Cache: 2048K (64 bytes/line)
general protection fault: 0000 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1
RIP: e030:[<ffffffff80271280>] [<ffffffff80271280>] identify_cpu+0x210/0x494
RSP: e02b:ffffffff80643f70 EFLAGS: 00010212
RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f
RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005
RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000
R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000
Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80)
Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000
0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00
0000000000000000 0000000000000000
Call Trace:
[<ffffffff802d09bb>] kmem_cache_zalloc+0x62/0x80
[<ffffffff8064cb00>] start_kernel+0x210/0x224
[<ffffffff8064c1e5>] _sinittext+0x1e5/0x1eb
Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef
RIP [<ffffffff80271280>] identify_cpu+0x210/0x494
RSP <ffffffff80643f70>
<0>Kernel panic - not syncing: Fatal exception
clear as mud to me.
are there any other logs that will help me?
I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.
Edited by: StewCobley on 13-Nov-2012 06:21

Kernel panic when trying to use spotlight with external display attached

Having an issue with my fairly new MacBook Pro (purchased in April). When it's connected to an external display, I will get a kernel panic 100% of the time if I click on the Spotlight icon. The same also happens sometimes when clicking Documents or Downloads in the dock, but that is infrequent. This only happens with an external display attached and I have tried multiple external displays and cables. Following is the kernel panic report. I don't really know how to read it, so if anyone has suggestions they would be much appreciated.
Mon Nov 15 19:13:33 2010
panic(cpu 2 caller 0xa7cbfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7fc71000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5516a188 : 0x21b50c (0x5d42fc 0x5516a1bc 0x223974 0x0)
0x5516a1d8 : 0xa7cbfa (0xc922bc 0xd02940 0xca1424 0x0)
0x5516a278 : 0xb97640 (0x95db004 0x9875004 0x100 0xe3d7a00)
0x5516a2c8 : 0xb8e639 (0x9875004 0x100 0x5516a2f8 0xa6c6d7)
0x5516a2f8 : 0x170d9ce (0x9875004 0x100 0x438004ee 0x1)
0x5516a438 : 0xbb62bd (0x9875004 0x9865004 0x0 0x0)
0x5516a478 : 0xa85e63 (0x9875004 0x9865004 0x0 0x0)
0x5516a518 : 0xa8246f (0x0 0x9 0x0 0x0)
0x5516a6c8 : 0xa844a3 (0x0 0x600d600d 0x702b 0x5516a6f8)
0x5516a798 : 0xd47652 (0xc1d00041 0xbfef0033 0xbfee0034 0x857c)
0x5516a808 : 0xd56e38 (0xa09d000 0xa051d00 0x8 0x1)
0x5516a828 : 0xd7ba20 (0xa051d00 0xb 0x5516a848 0x3)
0x5516a858 : 0xd7c23b (0xa054000 0x1 0x5516a87c 0x0)
0x5516a888 : 0xd5c485 (0xa054000 0x7d3ef080 0x1 0x0)
0x5516a8d8 : 0xd1e68e (0x46559000 0x1 0x0 0x3)
0x5516a948 : 0xd1dd99 (0x46559000 0x1 0x2 0x3)
0x5516a978 : 0xd13ca7 (0x46559000 0x1 0x2 0x4654b000)
0x5516aab8 : 0xd4ccfe (0x4654b000 0x0 0x5516abcc 0x5516abc8)
0x5516ab68 : 0xd0fc93 (0x4654b000 0x0 0x5516abcc 0x5516abc8)
0x5516abe8 : 0x5659b8 (0x4654b000 0x0 0x5516ae3c 0x5516ac74)
0x5516ac38 : 0x566257 (0xd9de20 0x4654b000 0x97edf88 0x1)
0x5516ac88 : 0x566b0b (0x4654b000 0x10 0x5516acd0 0x0)
0x5516ada8 : 0x285bce (0x4654b000 0x10 0x97edf88 0x1)
0x5516be58 : 0x21d8ba (0x97edf60 0xa0d05a0 0x1fd7e8 0x5e43)
0x5516be98 : 0x210a3a (0x97edf00 0x0 0x9d4ba40 0xa0e9b60)
0x5516bef8 : 0x216c9d (0x97edf00 0x0 0x0 0x0)
0x5516bf78 : 0x295156 (0x9245328 0x0 0x0 0x0)
0x5516bfc8 : 0x2a148d (0x9245324 0x7fff 0x10 0x9245324)
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.2.4)@0xd04000->0xdb9fff
dependency: com.apple.NVDAResman(6.2.4)@0xa16000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0xa09000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x9e7000
com.apple.nvidia.nv50hal(6.2.4)@0x15d7000->0x19ebfff
dependency: com.apple.NVDAResman(6.2.4)@0xa16000
com.apple.NVDAResman(6.2.4)@0xa16000->0xd03fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0xa09000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x9e7000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 254626597586
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1454000, size 0x65536) - last unloaded 196223967832
loaded kexts:
com.cisco.nke.ipsec 2.0.1 - last loaded 42574053426
com.parallels.kext.prl_vnic 5.0 9370.589435
com.parallels.kext.prl_netbridge 5.0 9370.589435
com.parallels.kext.prlusbconnect 5.0 9370.589435
com.parallels.kext.prlhidhook 5.0 9370.589435
com.jft.driver.PdaNetDrv 1.0.64
com.parallels.kext.prl_hypervisor 5.0 9370.589435
com.Logitech.Unifying.HID Driver 1.1.0
com.Logitech.Control Center.HID Driver 3.2.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.IOBluetoothSCOAudioDriver 2.3.8f7
com.apple.driver.IOBluetoothBNEPDriver 2.3.8f7
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 364
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelHDGraphics 6.2.4
com.apple.driver.AppleIntelHDGraphicsFB 6.2.4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.GeForce 6.2.4
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0

Though it doesn't look like one of them is clearly responsible, it may be due to the presence of one or more of these kernel extensions:
com.cisco.nke.ipsec 2.0.1
com.parallels.kext.prl_vnic 5.0
com.parallels.kext.prl_netbridge 5.0
com.parallels.kext.prlusbconnect 5.0
com.parallels.kext.prlhidhook 5.0
com.jft.driver.PdaNetDrv 1.0.64
com.parallels.kext.prl_hypervisor 5.0
com.Logitech.Unifying.HID Driver 1.1.0
com.Logitech.Control Center.HID Driver 3.2.0
As a first debugging step, try rebooting in safe mode:
http://support.apple.com/kb/ht1455
and see if the panics occur then, though quite frankly it appears it may be an issue with your video card and/or drivers.

Repeated Kernel Panics on MBP17" after upgrading from SL (without anything else) to LION or MAVERICKS .

All tentatives to upgrade from SL to LION or MAVERICKS on my MBP17" causes a KERNEL panic.
SL was reinstalled on several HDD and SSD WITHOUT anything else.
Any update to LiON or MAVERICKS will result in an immediate Kernel Panic.
Any clue?
Thanks

Thanks for your quick answer.
I am the only administrator of my personnal MAC (only one account)
I can't even start in safe mode, there is no firevault nor firmware password , nor RAID volume.
Therefore I had to format the disk and reinstall SL that works like a charm. No way to access the console ….
Any attempt to install LION or MAVERICKS results in a KERNEL PANIC during installation ...
There is no apps installed, no peripheral attached,
By chance I managed somehow to print a log report (see below)
Mon Sep 15 20:04:44 2014
panic(cpu 0 caller 0xffffff80048dc24e): Kernel trap at 0xffffff7f85eb2e43, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffef8016f64800, CR3: 0x000000002f33a000, CR4: 0x0000000000000660
RAX: 0xffffff7f85ebc5e0, RBX: 0xffffff8016f79a00, RCX: 0xffffff80d0886320, RDX: 0x0000000000000000
RSP: 0xffffff8107502840, RBP: 0xffffff8107502840, RSI: 0x0000000000000000, RDI: 0xffffef8016f64800
R8: 0xffffff8107502a78, R9: 0xffffff81075029e0, R10: 0xffffff7f85ee8780, R11: 0x0000000000000000
R12: 0xffffff7f85eec180, R13: 0xffffff8016f79a88, R14: 0xffffff80d0886320, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f85eb2e43, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffef8016f64800, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81075024d0 : 0xffffff8004822f79
0xffffff8107502550 : 0xffffff80048dc24e
0xffffff8107502720 : 0xffffff80048f3746
0xffffff8107502740 : 0xffffff7f85eb2e43
0xffffff8107502840 : 0xffffff7f85ed7cda
0xffffff8107502860 : 0xffffff7f85ed781f
0xffffff81075028a0 : 0xffffff7f85ed72e3
0xffffff81075028e0 : 0xffffff7f85ede7cc
0xffffff8107502970 : 0xffffff7f84df0720
0xffffff81075029c0 : 0xffffff7f84df2cef
0xffffff8107502a20 : 0xffffff7f84df8484
0xffffff8107502ae0 : 0xffffff7f863b194c
0xffffff8107502c10 : 0xffffff8004a0dcae
0xffffff8107502c70 : 0xffffff80049c562c
0xffffff8107502d70 : 0xffffff8004a00826
0xffffff8107502dc0 : 0xffffff80049cd109
0xffffff8107502f00 : 0xffffff80049d1877
0xffffff81075030a0 : 0xffffff80049d0d75
0xffffff8107503360 : 0xffffff8004b6bc16
0xffffff81075033f0 : 0xffffff80049fe011
0xffffff8107503470 : 0xffffff8004b8ce6a
0xffffff81075034f0 : 0xffffff8004a003b0
0xffffff8107503560 : 0xffffff7f86aeca27
0xffffff81075035b0 : 0xffffff7f86aed2f2
0xffffff81075035e0 : 0xffffff7f86aebe9d
0xffffff8107503770 : 0xffffff7f86aed3f4
0xffffff8107503800 : 0xffffff7f86aed5b4
0xffffff8107503850 : 0xffffff8004a157d1
0xffffff81075038a0 : 0xffffff8004a15427
0xffffff8107503950 : 0xffffff8004b70c63
0xffffff8107503a10 : 0xffffff8004a00117
0xffffff8107503a80 : 0xffffff8004c3a7ec
0xffffff8107503b20 : 0xffffff800486d434
0xffffff8107503b70 : 0xffffff800486c893
0xffffff8107503bb0 : 0xffffff80048751d2
0xffffff8107503d50 : 0xffffff8004878a94
0xffffff8107503f20 : 0xffffff80048dc68c
0xffffff8107503fb0 : 0xffffff80048f364b
      Kernel Extensions in backtrace:
         com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f84dec000->0xffffff7f84e10fff
         com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f85eaf000->0xffffff7f85ec4fff
         com.apple.iokit.IOAHCIBlockStorage(2.6)[8EC80DE5-078F-3949-9669-33A56446D86D]@0 xffffff7f85ed5000->0xffffff7f85eecfff
            dependency: com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f85eaf000
            dependency: com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f84dec000
         com.apple.BootCache(35.0)[5565AC58-0589-341F-A4D8-9813C092B137]@0xffffff7f863b0 000->0xffffff7f863b8fff
         com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[CA4A4DEF-4BAA-3C 0A-972E-8C88E30B8BB9]@0xffffff7f86aeb000->0xffffff7f86aeefff
BSD process name corresponding to current thread: mds_stores
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro5,2 (Mac-F2268EC8)
System uptime in nanoseconds: 1419643683351
last loaded kext at 1117829524433: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f86c3b000, size 49152)
last unloaded kext at 1189694094955: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f86c3b000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleIRController 325.7
com.apple.driver.MaxTranserSizeOverrideDriver 3.4.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.42f4
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04EF, 0x5465616D2D2D456C6974652D313333330000
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04EF, 0x5465616D2D2D456C6974652D313333330000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 840 Series, 250.06 GB
Serial ATA Device: FUJITSU MJA2500BH FFS G1, 500.11 GB
USB Device: USB Storage
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:

Error message when trying to upgrade from 10.3.9 to Tiger 10.4.5

Hope somebody can help. I'm fairly recent to macs as have always built and used pcs. Am having trouble upgrading from current pantherOS to Tiger. Bought emac with upgrade disc provided by seller. Disc was gray labelled emac. Installation went fine and everything was proceeding to point it finished writing files, configuring installation, and running installer scripts and then it quit with message: error installing software. Try reinstalling.
Tried reinstallation and same thing occurred. then Tried complete erase and new installation. Same error message.
Came to discussion group searching for something I might be doing wrong. Decided maybe disc was wrong even though it specified emac which is what I am using. Bought generic install disc that would install on any G3/4/5 with minimum specs per hardware which system met.Installation proceeded as it was going to install same as emac disc. This is normal full install disc for generic installation.
All installations screens came up and installation proceeded to same point as before and then quit with same message: error installing software/ Try reinstalling.
Have removed ram to original 256MB and tried. No luck. I am using external DVD for installation of DVD and wonder if this is problem but in the forums external DVD seems to work alright. Can reinstall old Panther OS without any problem
Ran hardware test and everything checked okay.
Should I just forget about upgrading and use 10.3.9 but would really like to know what is wrong. thanks. Rick

Welcome to Apple Discussions!
See my FAQ:
http://www.macmaps.com/upgradefaq.html
and then consider the instructions here to Archive and Install:
http://docs.info.apple.com/article.html?artnum=301270

Error 1053 when trying to upgrade from BOE 3.0 Fix Pack 3 to BOE 3.1 Update

Hi! I am trying to upgrade my BOE 3.0 FP3 Server to 3.1 (Update package, not full 3.1 install). The upgrade goes very well, and for a very long time, up until the very end. At the end when it tries to restart the Tomcat service it throws an error 1053 with the following message.
The Apache Tomcat 5.5.20 service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
I also get this same message if I try to start the service through Control Panel --> services or through CCM. The event viewer shows this message also in addition to the following..
Timeout (30000 milliseconds) waiting for the Apache Tomcat 5.5.20 service to connect.
Has anyone seen this before or know if this is a known error? I am hoping for a workaround so I dont have to backout or reinstall!
Thanks!
--Antonio

Hi Antonio,
Following information might help you to resolve the issue.
Solution1:
To resolve this behavior, use Computer Management to update the user profile so it is a member of the Administrators group, and then reboot the server to validate your changes.
Solution2:
You can disable DEP or add services to it:
1.Right-click on My Computer and select Properties.
2.Click the Advanced tab.
3.In the Performances section click Settings.
4.Click the Data Execution Prevention tab.
5.Use the Add button on the bottom to add the service's executables and ensure the box is checked. Do this for each Crystal Enterprise service.
Alternatively, you can disable DEP by checking the Turn on DEP for essential Windows programs and services only option. By doing so, it will disable DEP to all applications on the machine including Business Objects.
Solution3:
Increase the service time-out for Windows Services : http://support.microsoft.com/kb/839803http://support.microsoft.com/kb/886695
Regards,
Sarbhjeet Kaur

Why am i getting an error when trying to upgrade from 10.7.5 to 10.9

when i try and upgrade from 10.7.5 osx lion to 10.9 i get an error, i have 2GB of memory and 144MB of storage. can someone help?

This would indicate that your MacBook Air does not meet the requirements for Mavericks.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space

Kernel Panic when Remote users disconnects from AFP share

System 1 Macbook System 2 Mac Pro both 10.4.8. On my Macbook I mount an AFP share (Not SMB but a public share) on the Mac Pro. After copying files etc if I disconnect the share the Mac Pro will throw a kernel Panic. Found it odd that the Mac Pro dies even though I'm actually on the Macbook mounting and unmounting the shares. I couldn't find anything online about this. Anybody have an idea how to fix? SMB doesn't cause this problem only MAC to MAC.
Thanks,
dave.
Panic Log:
Sun Feb 11 14:39:28 2007
panic(cpu 0 caller 0x0035BEAC): mfreemlist: m_nextpkt of m_next != NULL
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25523768 : 0x128d1f (0x3c9540 0x2552378c 0x131df4 0x0)
0x255237a8 : 0x35beac (0x3e9cbc 0x1 0x1 0x1)
0x255237e8 : 0x7164e2 (0x3825d300 0x3825ac00 0x25523848 0xc16324)
0x25523808 : 0xc13e5b (0x3b7d800 0x3825d300 0x1 0x710876)
0x25523848 : 0xc16539 (0x3b7d800 0x0 0x3c03d9a0 0x255238f8)
0x25523918 : 0x71e37e (0x3b7d800 0x38189000 0x0 0x3825b000)
0x25523948 : 0x71e154 (0x3b7b840 0x3aa2720 0x2552396c 0x19d23a)
0x25523988 : 0x71e2b9 (0x3b7b840 0xbd1d4 0x3b3b540 0x21aead)
0x255239b8 : 0x719b77 (0x3b7b840 0x38189000 0x0 0x0)
0x255239f8 : 0x2025fe (0x41b9404 0x38189000 0x1e 0x25523a68)
0x25523a58 : 0x2675ff (0x41b9404 0x1e 0x38189000 0x874a504)
0x25523ab8 : 0x25e21f (0x41b9404 0x41b9404 0x38189000 0x4a1bedc)
0x25523bc8 : 0x239c12 (0x38189000 0x0 0x4a1bed8 0x0)
0x25523cd8 : 0x23837a (0x4a1bf48 0x0 0x0 0x3818905a)
0x25523eb8 : 0x238831 (0x38189000 0x28 0xffffffff 0x80fe)
0x25523ed8 : 0x25a750 (0x25523f60 0x25523f34 0x10 0x25523f60) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntel8254XEthernet(1.1.4a5)@0xc0b000
dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x70f000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x664000
com.apple.iokit.IONetworkingFamily(1.5.1)@0x70f000
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
Mac Pro Mac OS X (10.4.8)

DaddyPaycheck
Thanks for helping. I'm green at this! Getting definite experience as you can see, but can you help me with an actual real live make and model of a graphics card that is known to work on the G5 Xserve?
I called ATI re: their Radeon 9200, and was told by tech support that they do not support this card on the G5 Xserve. Yet, Scott Maiden, in his post above, referenced an ATI Radeon card.
What cards are being successfully used? Can I have a list?
Apple Tech Support will not give any such list. Maybe they know of some problem with all? (When I bought the Xserve in September of 2004, Apple Tech Support recommended the VillageTronic card.) The new, yet un-released Quad-core 64-bit Intel Xeon Xserve has "built-in graphics functionality, with mini-DVI output and support for industry-standard VGA displays," according to Apple's web site. Hopefully this will eliminate this type of problem in future releases of Xserve. But for the nasty here and now...
All I need is an inexpensive graphics card to administer this Xserve. Currently I am using a 21” SuperMatch SVGA monitor.
Thank to all who have helped.
James
jamescalvin-
The only cards I have found to work reliably in the
G5 XServe are the cheap-arse PCI models. I do not use
my XServe for serious graphics work so I do not know
how it works with other cards.
Can you swap in a known compatible PCI card for
testing purposes?
Luck-
-DaddyPaycheck
DaddyPaycheck
Xserve Mac OS X (10.3.9) Need list of Compatible PCI graphics cards

Kernel Panic when trying to install apps.

Everytime I try to install heavy apps like Final Cut Studio 2, Adobe CS3 och iLife 08 - I get a Kernel Panic after some installation progress (30-80%). It has something to do with "pkgextractor". It only happens on my Quad (clean Leopard install).
Tue Nov 6 12:58:11 2007
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x0000000000004014 PC=0x0000000000083148
Latest crash info for cpu 1:
Exception state (sv=0x63ce2a00)
PC=0x00083148; MSR=0x00009030; DAR=0x00004014; DSISR=0x40000000; LR=0x0008313C; R1=0x63D23870; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000802A0 0x002BE7D4 0x000E5618 0x000E6210 0x0024E6D8
0x00108638 0x00100154 0x002AF76C 0x002AF958 0x0030924C 0x000B24C8 0x55736572
backtrace terminated - frame not mapped or invalid: 0xF0080D70
Proceeding back via exception chain:
Exception state (sv=0x63ce2a00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x58e44c80)
PC=0x914A2EA0; MSR=0x0200D030; DAR=0x2DFEC000; DSISR=0x42000000; LR=0x9583544C; R1=0xF0080D70; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: pkgExtractor
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 1 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x63ce2a00)
PC=0x00083148; MSR=0x00009030; DAR=0x00004014; DSISR=0x40000000; LR=0x0008313C; R1=0x63D23870; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000802A0 0x002BE7D4 0x000E5618 0x000E6210 0x0024E6D8
0x00108638 0x00100154 0x002AF76C 0x002AF958 0x0030924C 0x000B24C8 0x55736572
backtrace terminated - frame not mapped or invalid: 0xF0080D70
Exception state (sv=0x58e44c80)
PC=0x914A2EA0; MSR=0x0200D030; DAR=0x2DFEC000; DSISR=0x42000000; LR=0x9583544C; R1=0xF0080D70; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: pkgExtractor
A!

It's probably a logic board or connection issue.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Kernel panic when trying to upgrade from OS X 10.7.5

Similar Messages

Maybe you are looking for